Shelving racks, Jungheinrich, min. 8m high, 200kg per shelf, shelves 1m x 0.50m – used – : = Price: 22.950.-€ (net) ex site, dismantled, packed and loaded! Manufacturer: Jungheinrich Type: MS Year of Make: 2000 Shelf load: 200kg Permissible bay load: 5,600kg Frame height: approx. 8m (probably even 8.98m) Shelves: MS 200 Load capacity: 200kg / floor Shelf dimensions: Height shelf: approx. 4cm Width: approx. 1m Depth: 0.50m Frame Type: U 56/45/3 Approx. 16 shelves per field Number of shelves: approx. 1,984 pieces Number of frames: approx. 128 pieces Condition: good (the material comes from a system with storage and retrieval machines, therefore no damage) Available: from approx. August 2025 Location: Cologne The conveyor technology and the storage and retrieval machines shown can also be purchased for an extra charge if you are interested!
approx. 5,000 pieces, Euro stacking container, SSI Schaefer, type MF 6220 (60 x 40 x 22cm), - used - : Price per piece from location: From 36 pieces only 5.-€ (net)! for truck acceptance (approx. 1,360 pieces): only 4,50 € (net) for complete acceptance: only 4.-€ (net)! We reserve the right to purchase a minimum quantity. With reinforced bottom for use on a conveyor system! Colours: approx. 2,500 pieces in red, approx. 2,500 pieces in blue! Manufacturer: SSI Schaefer Type: MF 6220 Year of Make: 2000 Exterior width [mm]: 396 Exterior height [mm]: 220 Exterior length [mm]: 594 Colour: blue Weight [kg]: 2.5 Handle: Penetrated handle Basic dimensions L x W [mm]: 594 x 396 Content [l] 41,6 Inner width [mm] 366 Interior height [mm] 187 Inner length [mm] 564 Material Polypropylene (PP) Material type: Plastic Usable height in stack [mm] 196 MF Seri ...
Pallet rack, SSI Schaefer, 1,000kg per pallet space, frame height approx. 6.40m, approx. 3,436 storage spaces – used – : Price for complete acceptance: only 35.000.-€ (net), dismantled, packed and loaded! Price for partial quantities on request! Hall 3: Manufacturer: SSI Schaefer Type: Pallet Rack / Longitudinal Traverse Rack Year of Make: 1994 Frame bracing: welded Frame depth: approx. 1.05m Shelf load: 3,000kg with truss length 2.70m = 1,000kg per pallet Shelf load: 4,000kg with truss length 3.60m = 1,000kg per pallet Bay load: 11,700kg (truss length 2.70m) or 14,400kg (truss length 3.60m) Field length / truss length: 2.70m and 3.60m Truss height: approx. 12cm Truss thickness / support: approx. 6cm Truss Type: IPE Frame height: approx. 6.40m Frame width: approx. 11.5cm Number of frames: approx. 225 pieces Number of trusses: 2.70m = 1,208 pieces 3. ...
Information: - Drying containers from Wood-Mizer incl. boxes - Dimensions: L/W/H: 6.10 x 2.94 x 2.59 m (see picture) - Power consumption: approx. 1 kW / h At the time, I converted the Wood-Mizer container so that 15 bulk cubic meters of firewood can be dried in self-made boxes. The boxes are included in the price. Furthermore, I supplemented the control with motor protection switches/sensors, etc. I let the wood dry in it for about 14 days. It then has a residual moisture of approx. 15%. The plant is currently still in operation, so it can be visited at any time.
Information: - Heating container with built-in wood chip heating - Dimensions: L/W/H: 6.10 x 2.54 x 3.00 /2.59 m In the converted sea container is a wood chip heating system from Herz, type: SKB25/25 kW The container also contains the container with the wood chips for discharge and the buffer tank (1000 l). The package also includes the acceptance funnel, which is located next to the container (see picture). This hopper can be filled with a wheel loader, for example. The wood chips are then transported back into the discharge hopper by means of a screw.
Pallet rack, Dexion, 1,000kg per pallet space, frame height approx. 6.40m, max. 8,250 parking spaces – used – : Price for complete acceptance: only 115.500.-€ (net), dismantled, packed and loaded! Price for partial quantities on request! Hall 2: Manufacturer: Dexion Type: P90-90/100 Year of Make: 2007 Frame bracing: screwed Frame depth: approx. 1.05m Shelf load: 3,000kg and a few levels/rows of 4,500kg (1,500kg/pallet) Bay load: 11,700kg to 18,000kg Field length / truss length: 2.70m (max. buckling length: 2.13m, with buckling length: 1.48m = 13,000kg), sometimes also a few fields with the 4.5 to truss with 18,000kg with a buckling length of 1.48m Truss height: approx. 10.5cm and 14cm Truss thickness: approx. 5cm Truss type: SLB 110 Frame height: approx. 6.40m Column profile: P90 Frame width: approx. 9cm Number of frames: approx. 572 Pieces Number of ...
Pallet rack, Dexion, 1,290 kg per pallet space, frame height approx. 6.70m, max. 650 storage spaces – used – : Price for complete acceptance: only 7.500.-€ (net), dismantled, packed and loaded! Price for partial quantities on request! Hall 1+3 Manufacturer: Dexion Type: Speedlock Super 4 Year of Make: 1981 Frame bracing: screwed Frame depth: approx. 1.10m Shelf load: 3.870kg Bay load: 16,200kg Field length / truss length: 2.70m Truss height: approx. 11.5cm Truss thickness: approx. 5cm Truss type: SLO 115/2 Frame height: approx. 6.70m Column profile: Type H frame thickness; approx. 8cm Number of frames: approx. 75 pieces Number of trusses: approx. 306 Color: yellow / green Condition: good – very good Available: from approx. End of August / September Location: 16356 Ahrensfelde OT Blumberg
This is a driven roller conveyor from the company TGW. The roller conveyor works perfectly and has been regularly maintained. To ensure functionality, we can also send you a short video. -Nominal width: 820 - Roll width: 1.50m *Scope of delivery* - TGW roller conveyor - Associated small parts
1000 l oil cabinet dispensing quantity selectable. Delivery possible Please inquire with place and postcode and whether there is unloading possibility. VAT not identifiable .
Masterflex MF 07525-40 L/S Digital Miniflex Pump Peristaltic Pump *Original price € 3,308 This compact, stackable pump features a rugged ABS housing that is easy to wipe clean and keep clean. The Miniflex pump head has a large occlusion angle that prevents fluid backflow up to the nominal pressure of the hose. Thermoplastic polyester self-lubricating rollers are low-friction and durable, ensuring smooth operation and long service life. L/S Series Type L/S Miniflex Pump head not replaceable Number of mountable heads 1 Channels 2 Castors 3 Flow rate min 0.008 ml/min up to max 324 ml/min Hose ID of 0.8 mm up to 3.2 mm Can be used as a dosing pump yes calibratable yes Analog interface (D-Sub 25-pin w) Operation membrane keypad with LCD display Housing material: ABS plastic, aluminum and vinyl Protection class IP 33 Motor brushless motor Motor speed min 0.1 rpm up to m ...
Watson Marlow 120U/DV Peristalsis Pump *Original Price 9100 The Series 100 pumps are the ideal choice for maximizing yield in fermentation and cell culture applications. These pumps not only offer high performance and reliability, but also ease of use for single-use systems. An error-free hose change takes only a few seconds, which further increases the efficiency of your processes. Biopharmaceutical processes require precise and repeatable pump performance that is easy to validate. Our Series 100, with its exceptional 2,000:1 speed range, offers exactly the flexibility and purity that are essential for drug testing. The keypad lock secures your pump parameters to ensure consistent and repeatable performance. Specifications: Protection class enclosure IP 31 Maximum pressure 30 psi Model 120 U/DV Flow rate 0.001 to 170 mL/min at 30 psi Motor Speed 0.1 to 200 rpm Temperatu ...
Pallet rack 5m high, Nedcon, 1.000kg / pallet, approx. 720 storage spaces - used - : Price: 21.250.- € (net) incl. delivery within Germany (without islands)! Example configuration – other configurations like unverb. on request! Price per frame: 146,50 € (net) Price per truss: 29.-€ Accessories: Price per corner bumper 90 degrees: 55.-€ (net) Price per post collision protection: 14.-€ (net) Manufacturer: Nedcon Type: Pallet Rack Year of manufacture: current new product Shelf load: 3,000kg Max. pallet weight: 1,000kg Max. usable bay load: 9,000kg (other bay loads on request) Frame Quantity: 66 pieces Frame height: 5m (other frame heights up to 7.50m available at short notice) Frame depth: 1.10m Frame bracing: screwed (frames are not delivered pre-assembled) Trusses Quantity: 360 pieces Clear width: 2.70m (also available in 1.80m and 3.60m) Inc ...
Carton erector, Bedo – second-hand - : Price from location: 29.500.- € (net)! Manufacturer: Bedo Type: VA 1195 Year of construction: 2006 two cardboard magazines Machine number: 1195.1.6684 400V/3PN/ 50Hz Control voltage: 24V 14.2 A Compressed air: 5- 7 bar With Nordson ProBlue 4 Adhesive Melter 4 Litre Hot Melt Glue Condition: good Available: from approx. Mid-January 2024 Location: Hanau area Manufacturer's text: Series 11 up to 20 cartons per minute Folding crates according to FEFCO 0201, 0200, 0209 and others all types of corrugated board Carton closure by means of hot melt glue, self-adhesive tape or gummed tape small to very large carton formats one or two cardboard magazines motoric/pneumatic mode of operation no format parts
Cantilever rack, one-sided, frame height 2.60m height, 80cm deep arms, 750kg per arm, hot-dip galvanized - new - : Price from location incl. loading! Price: 1.515.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units out of them by omitting or buying additional frames (or also by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new product Description: - Shelf stand on one side 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - With 3 height-adjustable shelf arms each - Load capacity at centre of gravity 400 mm - 750 kg per arm / 2..250kg per stand with 4 stands per arm level 4 x 750 kg = 3,000 kg ...
Collar shelving, double-sided, 3, 50 m height, low-1, 20 m, 750 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.900.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 750kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
Collar shelving, double-sided, 3, 50 m height, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.750.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar r ...
Collar shelving, double-sided, 4, 16 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.850.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided about 4, 16 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar ...
Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500 kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar r ...
Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 870 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.495.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 870 kg capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 870 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!
Collar shelving, single-sided, 3.5 m height, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.350.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!