Compressor AIRPOL 15 manufactured in 2008. Technical data : - capacity: 120 m3 - overpressure: 10 bar - engine speed: 3000 / min - engine power: 15 kW - dimensions (length x width x height): 1100 x 650 x 1180 mm - weight: 340 kg
We sell our air compressor because we need a bigger one. 3027 hours total run and service was always maintained. The compressor was built in 2014. Can be viewed at any time and can also be picked up directly
REF-2357 WORTHINGTON CREYSSENSAC ROTARY-SCREW AIR COMPRESSOR Rotary-screw air compressor. Manufacturer: Worthington Creyssensac. Brand: ROLLAIR. Model: ROLLAIR 75. Compressor: - Rated power: 55kW/75HP - Refrigerated air volume: 9,000m3/h - Sound level: ± 70dB - Weight: ± 1,400kg - Compressed air outlet Ø: 2” - Operating pressure: 12.5 bar Compressor motor: - Manufacturer: LEROY SOMER - Model: AP180LGU-T - Power: 55kW/75HP - 2,945 Rpm - 400V/100A Complete with instruction manual.
Pneumatic 2 finger parallel gripper, PGN+ 160-1-SD, Schunk, used tested Special price !! If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good and tested condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, se ...
2 finger parallel gripper with return spring, PGN+ 160-2-AS-SD, Schunk, used tested Special price !! If you have a VAT number, we will gladly issue you an invoice without VAT. 2 finger parallel gripper with return spring, external closing, PGN+ 160-2-AS-SD, Schunk, second-hand - the gripper has been tested and is fully functional - one piece is missing a cover plate which will be replaced by us. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good and tested condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude ...
3 jaw grippers with return spring, 52.81.1. 631, Fibro, mint condition Special price !! If you have a VAT number, we will gladly issue you an invoice without VAT. 3 jaw grippers with return spring, 52.81.1. 631, Fibro, as good as new - with internal closing return spring - pneumatic - gripping distance per finger 6mm Mint condition The part was purchased from a company's spare parts warehouse, has never been used and is in mint condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery o ...
Pneumatic 3-jaw gripper, 52.85.1. 630, Fibro, mint condition Special price !! If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition The part was purchased from a company's spare parts warehouse, has never been used and is in mint condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our websit ...
A screw compressor system Atlas Copco is offered, Used Ready for immediate deployment!!! 100% oil-free compressed air; Reduced energy costs; Applicable in: Pharmaceutical industry food and beverage industry; electronics industry; Medical and Healthcare If you have any further questions, please do not hesitate to contact us.
Compressor system consisting of two compressors Elektra + Boge which are connected together: 1. Boge Type S R 1830-45 No. 273287 from 1982 Maximum operating pressure 10 bar Displacement 1830l/min Speed 950 rpm. 2. Elektra compressor with accumulator Type LP1000/11/500 Factory No. 3114 Year of manufacture 1974, operating pressure 11 bar, Boiler capacity 500ltr., suction capacity 1000ltr./min. Flow rate 710ltr./min. Compressor speed 1360 rpm. Power requirement 10 hp Attention: two pressure gauges on the container are damaged/transport damage The plant is in a technically good condition and was dismantled and dismantled and removed during a company relocation and is no longer needed. This system was used for the use of several air nailers for pallet production. Transportation is done by buyer. Sale only without guarantee and warranty Changes and errors in technical ...
Red button leads to the auction ! Mobile screw compressor - mobile air compressor / trailer compressor Manufacturer Atlas Copco Type YA3 - 047017 Year of construction 1992 fully functional, press the starter button and it runs Operating hours according to counter 1,238, meter running No vehicle documents available Volume flow 51 litres per second / 3,060 litres per minute Final pressure / working pressure 8 bar Towbar is adjustable in height by two joints currently truck trailer eye with 40 mm mounted - could also be exchanged for ball coupling Drawbar load / support load 50 kg Weight approx. 900 kg
Sale offer for a high-quality BOGE compressed air station in mint condition, hardly used, with only approx. 500 operating hours. The compressor has been used in the food industry since 01/2019 and has not been in operation since 09/2022 (has been kept as a backup). Compressed air station BOGE C 16 FD • Maximum overpressure: 10 bar • Effective delivery rate: 0.46 - 1.71 m³/min • Oil: BOGE FoodLub-H1 • High-pressure hose: 500 mm • Operating hours approx. 449, idle hours approx. 87, load cycles approx. 6923 Container OKS • Pressure: 11 bar • Volume: 500 l • Design: upright • Surface coating: galvanized Accessories • Pre-filter F 18 P maintenance product • Coupling kit for 3 filters (F 6 to 18) • Microfilter F 18 M maintenance product • Activated carbon filter F 18 A maintenance product • Condensate Cleaner CC 2-2 needs to be replac ...
TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. GA 55 AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9,1 bar. - 131psi VOLTAGE 440V 60Hz P motor 55kW 75hp YOB 2010 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO MAS GA 37 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. MAS GA 37. AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9.1 bar. - 131psi VOLTAGE 440V 60Hz P motor 37kW 50hp 2010 YOB MADE IN. BELGIUM IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO GA 55 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
Offer 19301 Specifications: - Operating pressure 16 bar - Inlet capacity up to 17 m³/h - Refrigerant R 134 A - Drive 400 V / 2.52 kW - Space requirement approx. W 860 x H 2200 x D 1300 mm - Weight approx. 700 kg
Offer 24051 Specifications: - Running hours 6418 h - Load operating hours 2060 - Operating pressure 9.75 bar - Flow rate 1746 l/min - Drive 400 V / 15 kW - Engine speed 3000 rpm - Air tank 270 L - Integrated dryer - Space requirement approx. W 1600 x H 1800 x D 800 mm - Weight approx. 420 kg
Specifications: - Operating pressure 16 bar - Inlet capacity up to 1100 m³/h - Refrigerant R 134 A - Drive 400 V / 2.95 kW - Space requirement approx. W 1550 x H 2200 x D 860 mm - Weight approx. 280 kg
Sabroe SD 2200 / 291 Compressed Air Dryer Manufacturer: Sabroe Model/ Type: SD 2200 / 291 Year of manufacture 1997 Permissible pressure cold side 16 bar max. pressure 20 bar Permissible pressure compressed air side 16 bar Permissible temperature: 60 degrees Ambient temperature +2 to +50 Operating voltage 400 V Phases 3 Frequency 50 Hz Nominal consumption 4,300 kW Protection class IP 54 Refrigerant R134 a Filling weight 9.5 kg Fuse 16A Dimensions W/D/H 121/117/196 cm You can find more dry air dryers in other sizes - new and used - in our shop! International shipping costs on request!