advanced search
8837 results
used
ca. 70 ton Conveyor baonder full rubber ( no steel insert ) well preserved used from Leende - Holland Price € 500,= per tonne Tel. 0031 653 160 178
New in: 2013
used
Pallet rack, Dexion, approx. 7.50m high, 616kg / pallet, 3m truss length ideal for extra-wide pallets, max. 2,200 storage spaces – used – : Price for complete acceptance: only 27.500.-€ (net)! Price incl. some gratings and steel pads! Primarily complete sales! Price for partial quantities on request! Manufacturer: Dexion Type: Speedlock P90 Year of Make: 2013 Shelf load: 1,850kg (= 616kg / pallet) Bay load: 9,250kg at 1.98m articulation Field length / truss length: 3m Truss height: approx. 11.5cm Colour of the trusses: silver and orange (on site, the trusses were hung orange at the front and silver at the rear) Shelf height: 7.50m Column profile: P90 (9cm wide) Number of frames: approx. 202 pieces Number of trusses: 1,068 pieces Frame bracing: screwed Frame depth: approx. 1.10m Condition: good – very good Available: from approx. Mid-August 2024 Loc ...
New in: 2011
used
approx. 816 St. Stacking yokes for long goods, J. Muszinski, 3 to load capacity, heights 400 / 500 / 600mm – used- : Price per piece ex site, (net) incl. loading! Up to 40 pieces: 109.-€ up to 99 pieces: 105.-€ up to 250 pieces: 99.-€ For complete inspection: 89.-€ Minimum order: 16 pieces Manufacturer: J. Muszinski, welding company Type: HF Stacking Yoke Year of Make: 2011 Load capacity: 3,000kg Net weight: approx. 87 – 99kg Width: 1070 mm Ab. Load at internal height: H = 400mm to 27,700kg H = 500mm to 22,000kg H = 600mm to 18,500kg Blend: 40 cm 227 pcs. 50 cm 441 pcs. 60 cm 148 pcs. Available: immediately Condition: good Location: 47059 Duisburg
New in: 2024
used
189 pieces of lattice supports, 1 to. / Pallet space, for pallet racks 1.05m deep - new material - : Price per piece from location: 20.- € (net)! Only complete acceptance! Manufacturer: MantaMESH Type: MantaMESH Year of construction: 2024 Condition: very good Available: immediately Location: Paderborn ANSI MH 26.2 - 2017 compliant Performance independent of the rack beams Evenly Distributed Load (UDL) (kg) 1000 Allowable Deflection (mm) 6.4 Load given Structural Failure (kg) 2000 Properties ANSI MH 26.2 - 2017 compliant Made in Germany Pre-galvanized, hemmed beams SafeEDGE® on grilles and beams Grid has over 70% open area EU Design Registration No. 002435099-0003 Specifications Beam Type: Box 50, Box 50 Shelf depth (mm) 1050 Grid depth (mm) 1052 Grid width (mm) 879 Distance to top wire (mm) 25 Distance to subwire (mm) 100 Top wire Ø (mm) 4 ...
New in: 2018
used
AS/RS, viastore, approx. 4,300 crate spaces, crates approx. 600x 400m x 170mm or 220mm – : = Price incl. crates from location: 279.000.-€ (net), plus dismantling etc.! Manufacturer: viastore Type: ViaSpeed Omega Year of manufacture 2018 Storage Double Deep Box spaces 4,300 Container: 600 x 400 x Grids of the crates up to 1:16 Stacker crane operated with double-deep LAM 4x Conveyor Ports Load capacity per compartment: 2 x 50kg Shelf length: 21.56m Shelf height: 8.52m Width: approx. 4.50m 1 alley Former new price: 636.730,00 Condition: good Available: May 2025 Location: Coburg area Boxes: these are 600 x 400 mm BITO boxes: - 3,760 pieces with a height of 170mm (type XL-Motion XLM64171) - 500 pieces with a height of 220mm (type XL-Motion XLM64221) Furthermore, we have the respective box dividers for this: - 7520 BITO Dividers for Container Height 170 ...
new
Transport carriage IVG, built in 2020, craneable, load capacity 3to, unused. Transport carriage IVG, YOC 2020, unused, load capacity 3to, for the transport of turbine shafts or other objects, craneable, with reinforced attachment points for slipping or for safe transport with a forklift. Multiple presents. Dimensions approx. 2,400x750x500mm Dimensions approx. 2,400x750x500mm Dimensions approx. 2,000x750x500mm
used
Wooden cable drum in different sizes, sale en block. Quantity 7 pieces. Diameters from 60cm to 120cm Good condition according to photos.
used
Storage box lockable, stackable according to photos. Metrics: Length approx. 115cm Width approx. 75cm Height approx. 75cm Manufacturer DOKO
used
Storage box or scrap box according to photo. The box can be transported by forklift or crane. In the case of crane transport, there is a third eyelet at the bottom for tipping. Weight approx. 411 kg Multiple available! Price per piece!
used
Storage box for materials, lockable, tight against rainwater. Width approx. 3m. The doors are opened upwards. The doors are supported by gas pressure dampers to make it easier to open. In the round openings at the front are locks. Very safe to use! Weight per box approx. 400kg. Once with two doors, Once with three doors. Optically bad, technically good!
New in: 2004
used
Manufacturer Symbol Model MC9060-G (MC9000-G Series) RAM Memory 64 MB Form Pistol Operating System Windows CE .NET Display resolution 240 x 320 Scanner type Laser Data Collection Type Wireless Used in good condition with 4-fold charging station approx. 15 pieces available Against bid! Figure corresponds to the offered device! Picture shows an unused device, but the offered one is used! Illustration for information only! Special price
used
Groom Group Pneumatic suburban lifting beam with 2 x pneumatic chain hoists 40kN Type PVH K2/2x40kN Year of manufacture REP 08/2010 Factory No.: 078 Weight 980kg Serial No. 1313145 Total width approx. 4.7m Depth 0.6m Hoists 2x 40kn YOC 2010 Weight 980kg More available (approx. 15 pieces) e.g. SMT Scharf GmbH Lifting beam / Hubbalken HB-K2/P-3400 Load capacity 2x30kN Year of construction 2017 without chain hoists other smaller lifting beams / walkers with pneumatic chain hoists available (10 pieces) with suspension chassis, coupling (connector for several hoists).
New in: 2018
used
Carton erector, Bedo – second-hand - : Price from location: 27.500.- € (net)! Manufacturer: Bedo Type: VA 1135 Year of construction: 2018 Machine number: 1135.1.7500 AC400/230V/50Hz Control voltage: 24V 14 A Compressed air: 5 - 5.5 bar with Nordson ProBlue 4 adhesive melter 4 liters hot melt glue Condition: good Available: from approx. Mid-January 2024 Location: Hanau area
New in: 2008
used
Carton erector, Bedo – second-hand - : Price from location: 32.500.- € (net)! Manufacturer: Bedo Type: VA 1295 Year of construction: 2008 Machine number: 1295.1.6912 400V/3PN/ 50Hz Control voltage: 24V 14.2 A Compressed air: 5- 7 bar with Nordson ProBlue 4 adhesive melter 4 liters hot melt glue Condition: good Available: from approx. Mid-January 2024 Location: Hanau area
New in: 2006
used
Carton erector, Bedo – second-hand - : Price from location: 29.500.- € (net)! Manufacturer: Bedo Type: VA 1195 Year of construction: 2006 two cardboard magazines Machine number: 1195.1.6684 400V/3PN/ 50Hz Control voltage: 24V 14.2 A Compressed air: 5- 7 bar With Nordson ProBlue 4 Adhesive Melter 4 Litre Hot Melt Glue Condition: good Available: from approx. Mid-January 2024 Location: Hanau area Manufacturer's text: Series 11 up to 20 cartons per minute Folding crates according to FEFCO 0201, 0200, 0209 and others all types of corrugated board Carton closure by means of hot melt glue, self-adhesive tape or gummed tape small to very large carton formats one or two cardboard magazines motoric/pneumatic mode of operation no format parts
used
approx. 7.200 pieces, Euro stacking container in 1.19m x 610 x 420m - used - : Price per piece ex site: only 15.-€ (net)! Price for complete acceptance: only 10.-€ (net)! 1 truckload = 432 pieces! Manufacturer: unknown Year of manufacture: unknown External dimensions (LxWxH): 1,190 x 610 x 420mm Internal dimensions (LxWxH): 1,150 x 555 x 390mm Material: Polypropylene Weight per container: 10.8kg Colour: grey Approx. 432 boxes fit per truck Condition: good Available: from April 2024 Location: Emden, later Frankenberg camp
New in: 1993
used
2 pcs ESKA TRPa Roller Paternoster for Floor Coverings and Fabric Products Manufacturer: ESKA Lager- und Verladesysteme Schneider & Kossatz GmbH Type: TRPa Year of construction: 1993 Quantity: 2 pcs. Capacity: 12 Total load: 3000 kg Height: 3.80 m Width: 5.75 m Depth: 1.00 m Suitable for rolls up to 5 m wide
New in: 2016
used
DEMAG JC-P 1600 KG pillar jib crane manufactured in 2016 is used in supporting unloading and assembly work, as well as for machine operation in areas with limited space requirements. The compact design with increased stability is equipped with an rotating mechanism controlled by an electric inverter and a highly built-in jib, allowing for particularly high hook heights. All of this makes the DEMAG JC-P 1.6 T pillar crane ensure fast work and high safety in handling workpieces with a maximum weight of 1600 kg. Technical data of DEMAG JC-P 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 5000 mm
New in: 2014
used
VETTER AS16-4.0 1600 KG pillar jib crane was built in Germany in 2014. The lightweight, low-profile design combined with the electric rotation drive guarantees maximum operational comfort and a high lifting capacity for loads with a maximum weight of 1600 kg. All this makes the VETTER ASSISTENT AS pillar crane the ideal solution for many applications in limited spaces, halls and outdoor areas. Technical parameters of VETTER AS16-4.0 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4000 mm - maximum lifting height: 2500 mm - rotation angle: 270° - electric chain hoist - lifting class according to EN 13001: HC2 - stability class according to EN 13001: S2
New in: 2014
used
VETTER AS16-4.0 1.6 T pillar jib crane manufactured in Germany in 2014, is used for unloading, assembly work as well as for machine operation. The combination of a lightweight, low-profile design with a powerful electric drive ensures fast and safe movement of various types of loads with a maximum weight of 1600 kg. This makes the VETTER ASSISTENT AS pillar crane ideal for limited spaces, production facilities and outdoor areas. Technical data of VETTER AS16-4.0 1.6 T pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4 m - maximum lifting height: 2,5 m - rotation angle: 270° - electric chain hoist - lifting class (EN 13001): HC2 - stability class (EN 13001): S2