Output: Approx. 200 – 400 kg/h (info taken from manufacturer brochure, no warranties regarding actual product specific output) Extrusion height: 1250 mm Barrel: Feeding, mixing and output zone in good condition (measuring report by DEGUMA available), slight wear marks Feeding opening 110 x 85 mm, with feeding hopper Feeding roll (coolable), overhauled 4 tempering zones, plus screw and feeding roll (if required) Head: Without head Tempering: Without temperature control units, available upon demand Reducer: Dorstener spur gear i= 20.15,n2= 67,5 rpm recirculating oil lubrication system Driven by V-belts, i= 1,775 Motor: Siemens DC 70.5 kW motor, 50-2160 rpm, 168 A Dimensions: Approx. 3500 x 2000 x 2000 mm (length x width x height) Weight: Approx. 3000 kg Machine mounted on base plate Machine is cleaned
Lavatório: 4 x 1,2 m. Em aço inoxidável, com lamas sem fim. Painel elétrico.
Marca: Prat, modelo: P-6, câmara de corte: 800x600 mm, motor: 30 KW (40 hp), rotor aberto. Sem painel elétrico.
Weight: 9.1t, the machine is leaking and the control card is missing.
Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.
Operational hours counter: 59,129h, with Handling PSA 2080.
Operational pressure: 210bar, weight: 4t, with documentation, without accessories.
Injection pressure: 2057bar, closing force: 2750kN, stroke volume: 1213cm³, heating output: 30.7kW, length: 8425mm, height: 2545mm, weight: 14t, operational hours counter: 5002h.
Screw diameter: 35mm, operating hours: 73,500h, on-site inspection is possible.
Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h.
Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.
Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible.
Clamping force: 250kN, heating output: 4.2kW, connected load: 15.2kW, weight: 2.1t, operational hours counter: 72.811h, with documentation, without accessories.
Clamping force: 250kN, heating output: 2.7kW, connected load: 69kW, operational hours counter: 97,696h, with documentation, without accessories, the hydraulic control valve is defective on the closing side.
Clamping force: 500kN, heating output: 9.4kW, connected load: 24.5kW, weight: 3.5t, operational hours counter: 68,747h, with documentation, without accessories.
Connected load: 86kW, operational hours counter: 58,952h, with documentation, without accessories.
Connected load: 51kW, operational hours counter: 72.552h, with documentation, without accessories.
Operational hours counter: 85,318h, with documentation, without accessories.
Operational hours counter: 62,699h, with documentation, without accessories.
There are two Ferromatik Milacron K-TEC 250 available, clamping force: 2500kN, injection pressure: 2258bar, stroke volume: 441cm³, engine power: 55kW, weight: 16.5t, operating hours of machine 1: 84,365h, on-site inspection is possible, without accessories.