Fabricante:
(Categoria: 209)
SECOND-HAND LONGITUDINAL SANDER COMEC MOD. LON LS - CE RULES -Volt. 380/50 - S/N 970408 - Year 1997 ... mais informação
Capacity in X (usefull): 5.250 mm Capacity in Y (usefull): 1.350 mm Capacity in Z : 100 mm Routers: 1 Main routing motor: 7,5 kW, spindle: HSK F63, C-axisToolchanger with 12 placesVertical drills: 11 in X-direction, 11 in Y-direction Horizontal drills in X : 6 Horizontal drills in Y : 2 Machine table: 10 Supports with vacuum cupsSoftware: Woodwop 4.0
Manual static postformer Min/Max. workpiece length 1600 / 3100 mm. Profile height max.150 mm. Workpiece thickness min. 16 mm. Working height 950 mm. DOCUMENTATION AVAILABLE ... mais informação
SECOND-HAND ORBITAL SANDER CAMAM MOD. LEC200 - Min/max working diam. 10/100mm - Motor 5.5 Hp (4kw) - Year 1997 (CE) ... mais informação
Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997
Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997
Manufacturer: IMA, Type: Compact PC/KIF 7220, Year: 1997, Programm: yes, Achsensteuerung: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: yes, Number of tools per tool-magazine: no, Radius scraper: yes, Flat scraper: yes, Buffing unit: yes, Moulding units swivel-mounted: yes, Schwenkbereich Grad: 45-90, Top pressure belt/roller: Rolle, Feeding speed max m/min: 10-20, Compressed air bar: 6, Year :1997
Workpiece thickness: 12 - 60 mmFeed speed: 18 - 24 m/minEdge thickness: 0.4 - 6 mm for roll edges, 0.4 - 20 mm for stripsEquipment:manual fence at the infeedworkpiece preheatingBonding unit: QA34 / A20edge magazinePressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the controlHood unit HL83, automatic adjustment phase/straight, 2 motors 0.4 kWPre-milling unit: 2 x 1.5 KWMilling unit, with sensing, tiltable, 0.4 kWMold milling unit FF 12, 4-way tool changer, 4 motors 0.4 kWuniversal milling unitprofile sanding unitedge sanding unitControl: HOMATIC NC21
Brand: Höcker Polytechnik Type: VacuMobil EA 160A Intake manifolds: ø160 mm Length: 1,300 mm Width: 900 mm Height: 1,900 mm Capacity: 2050 m³/h Pressure: 2,580 Pa Motor: 3kW Cleaning: included Filter area: 9.2m2 ... mais informação
Fixed side at the leftPanel thickness min/max: 16/45 mmMin. panel width: 150 mmLateral panel support for panel width up to 900 mmMin/max. panel length: 700 / 3100 mmMax. laminate overhang: 110 mmMax. laminate thickness: 0,8 mmRadius min/max: 6 / 22 mm (depends the laminate)Feedspeed max. 18 m/minTop pressure by beltEquipment:Infeed fence, adjustable, defines the panel overhang2 x trimming unit 0,4 kW, HSK 25 toolholder1 x PVAc glue application5 x glue nozzle, adjustable1 x hot air blower3 x IR heating on top (55 cm length), 3 x bottom (90 cm length)Postforming zone 1,8 m. lengthVarious pre-installed profiling sets 1 x top trimmer 0,4 kW
Description: DITRON D60-2V digital readout . Incl. AccessoriesTurning length max.: 650 mm, turning diameter over bed: 280 mm, turning diameter over slide: 150 mm, speed: 55-2200 rpm, Approx. Onsite Dimension. (l x w x h): 1,300 x 600 x 1,500 mm, weight approx.: 350 kg ... mais informação
Wood chip heating system with 700 kw heat output only been in operation for 2 years Unfortunately, the fireclay was broken during dismantling ... mais informação
Description: • Centrifugal extraction fan • Serial number 362 • Motor power 29.44 KW-1500 rpm • Fan diameter approx. 900 mm • Belt drive • Input pipe diameter approx. 600 mm • Output pipe diameter approx. 550 mm • Dimensions for transport 1540 x 1400 x 2200 mmApprox. Onsite Dimension. (l x w x h): 1,540 x 1,400 x 2,040 mm, weight approx.: 650 kg
Description: • Centrifugal extraction fan • Motor power 36.88 KW • Fan diameter approx. 1000 mm • Belt drive • Input pipe diameter approx. 650 mm • Output pipe diameter approx. 600 mm • Dimensions for transport 1850 x 1750 x 2200 mmApprox. Onsite Dimension. (l x w x h): 1,850 x 1,750 x 2,060 mm, weight approx.: 800 kg
R&E Conveyor No 2618 Y.O.M. 1998 Width 2x 650 Length 16 m Curved, head approx. 6 m Good condition! ... mais informação
Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998
Technical data: Length: 1.0 m Stanganzahl: 4 St Drive: 4,0 KW ... mais informação
A complete sizing line is available, max. workpiece dimensions: 2500x500x30mm, includes alignment station SAG RULLIERA INTR. SEZION, longitudinal milling Gabbiani TKM.72 S, number of units: 4, power: 5.5/5.5/7.5/4kW, belt conveyor SAG, cross processing Gabbiani TKM. 72 S, power: 4/4/5.5/5.5kW, turner SAG, cross conveyor SAG TRANSFER CINGHIE RIBALTATORE, collecting station (hopper) SAG RULLIERA CON TRAMOGGIA, film machine BVM SM 6015 L, shrink tunnel BVM SC 6030 D, palletizer Sacot SCA 01 SPEC, the machine was used for profiling floorboards.