subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 301)
Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools. ... más información
two-component machine year of manufacture 1995, closing force 150 T, control MC 3, plasticizing unit 1 - screw diameter 40mm, molded weight 183g, plasticizing unit 2-screw diameter 30mm, molding weight 85g ... más información
Arburg 370C 600-100 Year of Make: 1995 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Spray pressure: 1550 bar Dosing volume: 70 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Air Valve x 1 Hydraulic core pull x2 Metrics: Weight: 3600 kg Length/Width/Height: 4.30x1.59x2.08m Drive: Pumps/motor: 11 kW Heating capacity: 4.2 kW Total power: 15.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Arburg 420C 1000-350 Year of Make: 1995 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 100t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Euromap Robot interface Hydraulic core pull X1 Metrics: Weight: 3700 kg Length/Width/Height: 4.35x1.64x2.08m Drive: Pumps/motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Demag Ergotech Compact 250-80 Year of Make: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Spray pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 280x280 mm Size of the clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. ...
Used injection moulding machine Dr. Boy 50 M Procan from ongoing production Parts warranty available. Plasticizing unit 42 mm thermoplastic open nozzle Water distributor 6-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 410 mm (width) x 358 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine Offer subject to change
Clamping unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 1050 x 900 Min./ max. mould height [mm] min 350 Maximum opening width [mm] 1200 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 556 Injection weight [g] 130 Injection pressure [bar] 1763 Electrical-hydraulic equipment Pump motor rated power [kW] 37 Heater power [kW] 19,8 Dimensions & Weight Net weight with control cabinet [t] 19
Ref. no.: 17195Hersteller: DEMAGYear of construction: 1996Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 400 x 400 mmMould height min.: 250 mmPlaten size (h x v): 580 x 590 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 3,9 Ã 1,4 Ã 1,9 mMachine weight: 3700 kg
Molding machine of Mag Type: Ergotech 1300-12000 system, with rice robot control: NC4 year: 1996 Clamping unit Clamping force t: 1300 opening stroke mm: 1500 Holm dimension mm: 1500 x 1250 min/max height mm: 700/1400 Plate size: 2150 x 1880 injection unit Screw diameter mm: 130 injection weight gr: 6060 Injection volume cm 3: 6730 spray pressure bar: 1799 Dimensions and weights Dimensions Lxwxh m: 14.1 x 3.2 x 2.7 machine weight kg: 60,000/20,000 Miscellaneous Nuclear trains with rice robot EUROMAP 12
Netstal injection moulding machine Type: HP 3000 / 1650 control:-year of production: 1995 Clamping unit Clamping force t 300 gap mm: 625 Holm dimension mm: 680 x 680 min/max height mm: 500-850 Plate size: 1040 x 1040 injection unit Screw diameter mm: Gr 70 injection weight: 868 Injection volume cm 3: 954 spray pressure bar: 1727 Dimensions and weights Dimensions Lxwxh m: 9 x 2.30 x 2.52 machine weight kg: 21.500 Miscellaneous EUROMAP 12
Manufacturer Arburg Type 370 M 600-200 Control Multronıca Built in 1996 Closing unit Closing force t 60 Opening path mm 500 Holm size mm 370 x 370 Installation height min/max mm 250 Plate size 545 x 545 Spraying unit Screw diameter mm 35 Spray volume cm3 144 Spray weight gr 121 Spray pressure bar 1750 Dimensions and weights Machine weight Kg 3600 Other core train
Description: incl. grinder (Getecha) Screw diameter 18 mm Screw stroke max. 80 mm Molded part weight max. 17 g/hp Clamping force: 250 kN Control Arburg CNC Opening force 65 kN Opening stroke max. 275 mm Mold installation height min. 200 mm Platen distance - max. 475 mm Distance between the uprights 270 x 270 mm Plate width 400 x 400 mm Ejector force max. 15 kN Stroke 95 mm Total power requirement 24 kW Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,000 mm, weight approx.: 2,000 kg