subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 1200)
ERSA HOTFLOW - 7 Continuous Dryer / Tunnel Dryer / Belt Dryer Type: HOTFLOW – 7 Convection oven as tunnel dryer / belt dryer / continuous dryer for Drying of panel materials on the top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling rods at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Nominal power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power 67 KW Year of construction 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (Without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm The machine can be used as a soldering oven – soldering machine – reflow oven with little effort. ...
Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3 MTA S.p.A. TAEevo Tech 802 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, electronic fuel injectors, buffer tank 678 ltr. and built-in P3 circulation pump. Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 79.48 Max. current (A) 142.2 Starting current circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200389185 Year of construction 2022 Condition: Optical 2, Technically ok (use ...
Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 MTA S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, electronic injection valves, buffer tank 678 ltr. and built-in P3 circulation pump: Cooling capacity kW 136 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70.48 Max. current (A) 119.28 Starting Current Circuit (A) 235.01 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2131 Connection Rp 3" Serial No.: 2200389888 Year of construction 2022 Condition: Optical 2, Technically ok (used ...
Chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 M.T.A. S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crankcase heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr. ,built-in P3 circulation pump and condenser pressure control (infinitely variable speed control of the fans). Cooling capacity kW 116 Cold water temp. Outlet/ Entrance: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, power consumption (kW) 60.99 current (A) 102.78 Starting current circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2" 1/2 Series No.: 2200385401 Year of construction 202 ...
Process chiller / chiller air-cooled, Type: TAEevo Tech 251 P3 MTA S.p.A. TAEevo Tech 251P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 Circulating pump. Cooling capacity kW 49.7 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 8.48 Available pump pressure (bar) 2.61 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 27 Max. current (A) 46 Starting Current Circuit (A) 144 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2 " Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty Serial No.: 2200393289 Year of construction 2022 Condition: ...
Stainless steel tank, upright with 500 litre volume, operating temperature 20°C, operating pressure 16 bar, ... más información
GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg ... más información
Process Air Cooler/Chiller/Chiller Air Cooled, Type: TAEevo Tech 101 P3-20 M.T.A. S.p.A. TAEevo Tech 101 P3-20 are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr. , built-in P3 pump and speed control of the fans (winter package). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 27.5 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 4.68 Available pump pressure (bar) 2.54 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 14 Max. current (A) 25 Starting Current Circuit (A) 123 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 637 Connection Rp 1"1/2 Serial No.: ...
Process chiller / chiller air-cooled, Type: TAEevo Tech 081 P3-20 MTA S.p.A. TAEevo Tech 081 are air-cooled compact water chillers that are suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulation pump and condenser pressure control with speed-controlled fans. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 22.5 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 3.82 Available pump pressure (bar) 2.69 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 12.04 Max. current (A) 20.2 Starting Current Circuit (A) 114.77 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 475 Connecti ...
Process Air Cooler/Chiller/Chiller Air Cooled, Type: TAEevo Tech 020 P3 MTA S.p.A. TAEevo Tech 020 P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 60 ltr., built-in P3 pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 5.68 [19380 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 0.951 Available pump pressure (bar) 2.9 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 4.12 Max. current (A) 7.21 Starting Current Circuit (A) 40.09 Protection class: IP54 Dimensions: Length (mm) 1284, Width (mm) 560, Height (mm) 795, Weight (kg) 204 Connection Rp 3/4" Serial No.: 2200396488 Year of construction 2 ...
Nitrogen phase separator and cooling bath, 100 L, Cryotherm, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was removed from a machine that had been in operation for a maximum of 2 years. The current new price of a similar phase separation station with cooling bath is approx. € 38,000. Technical data and scope of delivery: - 1 nitrogen phase separator 100L category II made of stainless steel, Cryotherm, - incl. the required arm above the phase separator, - incl. 3 stainless steel lines / hoses - 1 cooling bath - Without control units, a control unit, Cryo LC, liquid nitrogen level controller with probe diameter, is required for both the phase separator and the cooling bath. We have the offer for the Cryotherm controls available. Ensuring the function In order to ensure the functionality of the goods ...
Stainless steel pressure filter, EDFR-D-060-G-530-1-V-1, 400bar, Hydac, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Grundfos CR64-3-1 A-F-A -R-HQQE Multistage Centrifugal Pump Rated speed: 2923 min-1 Nominal flow rate: 64 m³/h Power requirement : 15 kW Nominal head: 79.8 m Rated voltage: 3 x 380-415D/660-690Y V More centrifugal pumps new and used - you can find them in our shop! International shipping costs on request!
TECHNICAL SPECIFICATIONS Manufacturer: VIRTO Designation: Multi-frequency sieve Design: Dry screening Type: RS 2814.1 Year of construction: 2010 Number of screen decks: 1 screen deck Screen length: 2,800 mm Screen width: 1,400 mm Screen inclination: adjustable by crank system Screening area: 3.6 sqm Areas of application: 25 mm - 20 μm Drive type: Electric unbalance motor Drive cable: 4.1 kW Frequency: 50 Hz SPECIFIC COMMENT - 2 identical machines available - Machines were never used
Parts of a fermentation cellar are offered: Open fermentation vat 25 hl 2 pieces Fermentation vat 25 hl net 32 hl gross round version, with cooling stand on standard feet Dimensions D inside = 1700 mm Hmax= 2000 mm Conical bottom 30° cooling 1 cooling zone on the sheath 3.0 m2 each, Pmax.= 3bar G1 Equipment Analog Temperature Display Sampling valve inlet/outlet DN32 with disc valve Second outlet DN32 with disc valve Height from the bottom H=150mm 2x open fermentation vats each 50 hl with cooling standing on standard feet Dimensions D = 2370 mm H = 3000 mm 2x ZKG fermentation tanks 25 hl containers for fermentation; Stainless steel V2A Standing; insulated, equipped with heat exchanger; 3,200 l
A Decanter is offered, Year of construction 2011, The system is ready for use, all technical data can be found in the pictures. If you have any further questions, please do not hesitate to contact us. ... más información
Processing plant Manufacturer: KORUMA Maschinenbau (Neuenburg) Year of construction: 1987 with processing vessel (diameter: approx. 300 mm) with 2 feed tanks, 1 of which is double-jacketed (diameter: approx. 150 mm each) with scraper agitator with sight glasses with temperature gauge with control cabinet & control mounted on a stainless steel frame very good condition LWH: 1100 x 750 x 1450 mm