máquinas e equipamentos para engenharia de processo usadas para venda

Parts of a fermentation cellar are offered: Open fermentation vat 25 hl 2 pieces Fermentation vat 25 hl net 32 hl gross round version, with cooling stand on standard feet Dimensions D inside = 1700 mm Hmax= 2000 mm Conical bottom 30° cooling 1 cooling zone on the sheath 3.0 m2 each, Pmax.= 3bar G1 Equipment Analog Temperature Display Sampling valve inlet/outlet DN32 with disc valve Second outlet DN32 with disc valve Height from the bottom H=150mm 2x open fermentation vats each 50 hl with cooling standing on standard feet Dimensions D = 2370 mm H = 3000 mm 2x ZKG fermentation tanks 25 hl containers for fermentation; Stainless steel V2A Standing; insulated, equipped with heat exchanger; 3,200 l

A Decanter is offered, Year of construction 2011, The system is ready for use, all technical data can be found in the pictures. If you have any further questions, please do not hesitate to contact us.  ... mais informação

Processing plant Manufacturer: KORUMA Maschinenbau (Neuenburg) Year of construction: 1987 with processing vessel (diameter: approx. 300 mm) with 2 feed tanks, 1 of which is double-jacketed (diameter: approx. 150 mm each) with scraper agitator with sight glasses with temperature gauge with control cabinet & control mounted on a stainless steel frame very good condition LWH: 1100 x 750 x 1450 mm

2 x SEEPEX BN 1-6L, built in 2010, flow rate: max. 1,900 l/h, 1.1 kW with variable speed gearbox 2 x SEEPEX MD 006-24, built in 2010 and 2016, flow rate: 107 l/h, 24 bar, 0.55 kW with variable speed gearbox  ... mais informação

1 x NEZTSCH NE80 1 x NETZSCH NU50B, 1 x PCM 100/10 1 x Manufacturer unknown ... mais informação

420 volts, 50 Hz 1465 rpm Drive 10 kW EX-protected Control cabinet included Subject to prior sale - errors possible Internal reference number: M-1161  ... mais informação

Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum controller, vacuum pump, radiator, thermostat.  ... mais informação

Used spray dryer by ProCepT. Model SD1. Year of construction 2017. Dryer made in ATEX: EX II 3G. The ProCepT SD1 spray dryer is designed for formulation and process development as well as small-scale clinical production. The device enables spray drying of samples with a capacity of 0.5 ml to several liters. The equipment is used in preclinical and clinical applications with the ability to continuously process water in the range of 0.1-15 ml/min (0.01-11/h) (higher for organic solvents), with typical batch sizes from 100 mg to several kg dry product. The operator can monitor and control every critical process parameter using a computer with a touch panel. The software provides complete data recording with tracks. During the process, there is a negative pressure in the process column. The dryer uses a nitrogen recirculation system to process larger amounts of solvents. Solvents ar ...

Used rotary screener. Capacity: 500 L Cylinder dimensions: 700x1250mm. Material: stainless steel. 2 pieces available.  ... mais informação

Used Giusti tank made of stainless steel. Capacity 500 L. Tank equipped with: - heating jacket – steam 5 bar - frame mixer - chopper at the bottom of the chamber - scrapers - covers on the coat The tank is placed on 4 legs. Dimensions: diameter 1300 mm, cylinder height 600 mm, bottom head 400 mm, total height 2000 mm + 100 mm anchors

Linatex Pumps Type S Pressure line ø125 / suction line ø125 Performance: various Drive motors: 500V  ... mais informação

Used ATEX agitator RW0252800300 – 0.25 KW – 2800 rpm. For smaller containers and drums. ATEX II 2G EEx e II T3 Electric motor: Electric motor VEM motors Thurm GmbH, 0.25 KW, 2-pole, 3 x 230/400 volts, 2800 rpm, IP55. Weight approx. 8 kg. With motor protection plug. Iso F, suitable for frequency converters. Shaft: Precision stainless steel shaft D10, length 500mm, diameter 10mm, Material: Stainless steel 1.4301. With rigid coupling stainless steel 1.4571. Agitator: Double-bladed inclined blade stirrer, diameter 244mm, Material: Stainless steel 1.4571 With PTB-ATEX test certificate.

Vacuum Pump, Liquid Ring Vacuum Pump, Elmo Rietschle, Type 2BL2061 I offer a liquid ring vacuum pump from Elmo Rietschle, type 2BL2061 1AK506B, from a liquidation. The Elmo Rietschle Vacuum Pump of the L-BL2 series is a compact, ready-to-connect recirculating vacuum pump with a high pumping speed of up to 40m³/h for easy on-site installation. Connect the supply voltage, fill the water tank, install the suction line – done. The pumping works air-cooled, 100% oil-free and without additional water requirements during operation. Due to the contact-free compression of the pumped medium within the pump, it works practically maintenance-free. In addition, the vacuum pumps offer much higher resistance to water and steam than comparable systems. The year of construction of the vacuum pump is 2020, the weight 69kg (empty). The pump was used to dry wood chips and is therefore not contamin ...

Vacuum drying oven from a liquidation. The drying oven is made entirely of stainless steel on the inside and allows drying under vacuum up to 1mbar (depending on the drying material and the pump connected). External heating is provided by a thermal fluid (water, oil). The heating circuit is absolutely tight, various attachments and flanges are available. The dryer was used to dry wood chips and is therefore not contaminated. The location of the device is Traben-Trarbach. Inspection possible, delivery in a radius of 200km possible by arrangement, otherwise only pick-up. Specifications: Boiler room capacity 630 litres, boiler room dimensions 780x1050x890mm³, number of heating plates 8, plate dimensions 730x1000mm², usable height between plates 85mm, 1 door with gasket Manufacturer Conrad Tschokke AG Winterthur Switzerland, year of construction 1970, complete original construction dr ...

Screening Machine, Tumbler Screening Machine, Vibro sieve, Allgaier Werke TSM-1200/2 Screening machine from Allgaier from a liquidation. The vibratory screening machine has a diameter of 1200mm with 3 screen bottoms and a ball knock cleaning of the fine screen. The screening machine is fully functional and can be tested on site. The screening machine was used for the screening of wood chips and is therefore not contaminated. The location of the device is Traben-Trarbach. Inspection possible, delivery in a radius of 200km possible by arrangement, otherwise only pick-up. Specifications: Manufacturer Allgaier Werke, year of construction 1992, type TSM-1200/2 Space requirement 1500x1500mm², height 1600mm, weight approx. 750kg

This evaporative dryer was built in Hungary by DKG-EAST RT in 1995. The equipment was transported to Finland, where it was inspected by Finnish Inspecta in 1999. The original purpose of this equipment was to concentrate waste water solution from a molasses production process by evaporating water, but the system was never installed. The certified pressure for the equipment is max 2.0 bar, min -1.0 bar. The input heat for the evaporation comes from steam of 200 °C. The equipment is suitable for similar purposes, concentrating waste water streams from various processes and thus reducing the amount of waste water to handle. Capacity in molasses wash water evaporation: Input of thin stillage: 30.0 t/h, 8.5 % Output of product stillage: 3.54 t/h, 72 % Steam input: 3.9 t/h, 200 °C, 11018 MJ/h Heater 1. Price 90.000 € Nominal heat surface 512 m², actual heat surface 518 m². Max ...

Watson-Marlow Bredel SPX25 Hose Pump Condition: Unused Shipping weight: 120 kg Dimensions: 100x75x65cm WxLxH Bredel high-performance hose pumps handle abrasive sludge, paste-like materials and slurry with 100% volumetric accuracy. Unlike diaphragm, lobe, and progressive cavity pumps, moving parts do not come into contact with the product and there are no mechanical seals in the pumps. The pumped liquid is entirely contained within a long-lasting hose, preventing the user from coming into contact with chemicals, sludges, and slurries. Each Bredel hose is precision machined to ensure flow stability and pump performance in demanding fluid handling applications.

Profile granulator, with slanted trestle. ... mais informação

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding  ... mais informação

Multi-knife mill Rotor 500 mm diameter x 1000 mm width, housing with 6 rows of stator blades Granulator with high cutting sequence for fine grinding Drive motor 90 kW Typical applications are all cuttable materials such as pulp, paper, rubber, foam, etc.  ... mais informação