Fabricante:
(Categoria: 203)
WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th s ...
Width 510 mm 4 knives Neat, works You can call or write to us. We can speak and write German and Russian. You can also send messages in English. ... mais informação
Multi-sided wide planing machine with chamfer unit LEDINEK SUPERLES 300 4V + 4F Planing width (min/max): 70 - 300 mm Planing height (min -max): 19 -300 mm Workpiece length (min): 2,000 mm Feed speeds: up to 230m/min Weight: 13.500 kg ... mais informação
Four-sided planing machine Harbs 250 x 150 mm 7 spindles 350 hours of uptime 3 m1 dressing table 8 newly rubberized feed rollers Grooved bed The machine is practically as good as new, ready for operation Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12
A combined Kölle HK 63 planer is sold. Gearbox was completely disassembled, cleaned, greased and adjusted. Both shaft bearings completely replaced. Thickness table adjusted to approx. 0.01 mm. Dressing tables were set parallel to each other. The feed and pull-out rollers as well as the pressure beam have been perfectly adjusted, so that there is no planing impact. Newly painted Ready for immediate use Dimensions approx. 210x120cm Planing width 63cm Planing height 22cm 4 Knife Shaft Strip Plane Knife 2 sliding rollers in the table 2 feed speeds Toothed Steel Feed Roller Steel Pull-Out Roller Loading facility available Price is gross (total price) VAT not deductible (margin scheme) The machine can and should be viewed and tried out on site, as a return and warranty are excluded. You can find our terms and conditions on our websit ...
SPECIFICATIONS: Max. machining width mm: 630 Max. working height mm: 240 Installed power: 7.5 KW Feed speed: 6-18 m/min Roller with 4 blades Voltage: 380 volts Manual operation ... mais informação
SPECIFICATIONS: Working dimensions mm: 3000 x 530 Speed 5000 rpm Number of knives: 04 Installed capacity: KW 5.5 ... mais informação
Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.
Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz ... mais informação
SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502
High-performance industrial planing machine In good condition, lots of accessories ' ... mais informação
High-performance planer With chamf device good condition 223 kW Year of construction 2003 Many spare parts ... mais informação
Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package ... mais informação
Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L ...
ready for use m used Pre-dressing table for copper mill planing machines Total length 2600 mm Planing width 240 mm ... mais informação
CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900 ...
CATALOG NUMBER 6651 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from above, 4 introducing rollers, toothed, including 2 double ones - from above, 1 pulling roller, smooth, rubber - rubber, pulling roller at the bottom - pneumatically pressed rollers - feed on cardan shafts - 1.1kW feed motor - 0.37kW lifting motor - electric adjustment of the planing thickness - length of the introductory top 1980mm - side pressure - smooth adjustment of the feed speed 8-16m / min - central lubrication - diameter of the extraction port 5x140mm - locked in the cabin - dimensions length / width / height 3400x1500x1700mm - wei ...
Order No. 6716 TECHNICAL DATA - max planing width 510mm - maximum planing height on both sides 190mm - maximum four-sided planing height 130mm from down: - guide rails - preliminary table, adjustable - smooth skid roller - 510mm planing shaft, 4-knife 5.5kW - 2 smooth, sliding shafts - adjustable rollers in the lower table top in advance: - pulling shaft, toothed - pressure - pulling shaft, toothed 2 pcs - pressure - 520mm planing shaft, 4-knife approximately 7.5kW - pressure - pulling shaft, smooth - pressure in the back: - side spindles 2 pieces - 1.right, vertical 130mm 4kW - 2nd left vertical 130mm 4kW - manual spindle feed - diameter of the spindles 40mm - adjustable spindles up / down, right / left - the axes are positioned alternately - side clamp 2 pcs - locking spindles - 2 types of feed speed + smooth about 3kW - diameter of the extraction conn ...
CATALOG NUMBER 5843 TECHNICAL DATA - shaft width 510mm - 3-knife shaft - shaft cover - length of the tops 2530mm - cast iron tops - both adjustable tops - cast iron guide adjustable at an angle - 3kW engine - dimensions length / width / height 2530x900x1000mm - weight 897 kg ADVANTAGES - Italian production - used planer - intended for professional use Net price: PLN 11500 Net price: EUR 2738 depending on the price EUR 4.20 (Prices may change with higher fluctuations)
Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed ...