- A. MEIER (1)
- A.M.P.E.R.E. (1)
- AARDWOLF (1)
- ABAKUS (1)
- ABAWERK (1)
- ABB (1)
- Adixen (2)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALCE (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (4)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- AMP (4)
- ANEST IWATA (1)
- ANGELANTONI (1)
- ANGELO VECCHIO (2)
- ANYCUBIC (1)
- APV (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- AS EXCLUSIV (1)
- ASECOS (2)
- ASSFALG (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- ATOM (1)
- AUSA (1)
- AVK (1)
- AVOCENT (1)
- BACHER (1)
- BANK (1)
- BASE (3)
- BAUER (3)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BERNER (1)
- BETA (1)
- BETTER PACKAGES (1)
- BIG (7)
- BILZ (6)
- BINDER (1)
- Bito (2)
- BMS (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BORG WARNER (1)
- BOSCH (9)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BOY (1)
- BRADY (1)
- BRAZILIAN SHIPYARDS (1)
- BROVIND (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BUHLER (1)
- BULLERJAN (1)
- BUSCH (1)
- BUX (3)
- BÖSSINGER (1)
- CA-02 (1)
- CABER (3)
- CALAMIT (1)
- CAME (1)
- Capstone (2)
- CARRELLIFICIO PADOVA (1)
- CASE TECH (1)
- CASTIGLIA (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CERA (1)
- CFM (1)
- CLEAN FORCE (1)
- CLENA (2)
- CMB (10)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- COMAC (1)
- COMET (1)
- CONCEPT LASER (1)
- CONTEC (1)
- ... más
Fabricante:
(Categoría: 2500)
Año de construcción: 2005
usado
Te koop Endress + Hauser Flowmeter Type: Promass 80F Serial number: 79097B02000 Inclusief test certificaat Number: 1.09 Voor meer info graag bellen of mailen. email: wh.derikx@gmail.com Tel: +31620758459 De nu kopen prijs is excl. 21%btw ... más información
Año de construcción: 2005
usado
Cable length meter, -robust machine version, measuring wheel circumference 500, -with mech. Counter for 9999.99 m. measuring accuracy of 0.4%. -Number height 7. -Cable diameter 20-120mm Nudlmuhk With the electronic pre-selection counter as an accessory, the desired cable length can be preselected and the winding machine can be switched off. This machine does not have an official calibration.
Año de construcción: 2005
usado
An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Año de construcción: 2005
usado
Te koop Endress + Hauser Flowmeter Type: Promass 80F DN 150 Serial number: 7A00BE02000 Inclusief test certificaat Number: 2.05 Voor meer info graag bellen of mailen. email: wh.derikx@gmail.com Tel: +31620758459 De nu kopen prijs is excl. 21%btw ... más información
Año de construcción: 2005
usado
Te koop Endress + Hauser Flowmeter Type: Promass 83F Serial number: 79097A02000 Inclusief test certificaat Number: 1.06 Voor meer info graag bellen of mailen. email: wh.derikx@gmail.com Tel: +31620758459 De nu kopen prijs is excl. 21%btw ... más información
Año de construcción: 2005
usado
Cartridge filters, among other things, for the filtering of steel dusts Manufacturer: Donaldson Torit Type: TDS 20 Year of construction: 2005 Power consumption fan: 22 kW Volume flow: 18,000 m³/h Pressing: 2,550 Pa Weight: 1,800 kg Construction: Robust filter housing made of 3 and 4 mm sheet steel Special features: Upstream cyclone made of Hardox sheet metal, downstream police filter system, various pipes and screws
Año de construcción: 2005
usado
90 € Description: Fuel Tank Serial number 044051551657 Lower tank test pressure 0.5 bar Polyethylene interiorApprox. Onsite Dimension. (l x w x h): 1,600 x 750 x 1,900 mm, weight approx.: 160 kg ... más información
Año de construcción: 2005
usado
40 € Description: Manual chain hoist Serial number B53598 Maximum load capacity: 1.5 Tnserial number: b503598, Approx. Onsite Dimension. (l x w x h): 200 x 700 x 200 mm, weight approx.: 30 kg ... más información
Año de construcción: 2005
usado
Año de construcción: 2005
usado
300 € Description: Machine number 5308/04/05 Door dimensions 1400 x 1100 mmApprox. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 1,000 kg ... más información
Año de construcción: 2005
usado
This AMADA EUROPE 255 CNC Punching machine was manufactured in the year 2005 in France. It is equipped with a Fanuc Series 18i-PB control unit. The machine has a punching force of 220 kN. ... más información
Año de construcción: 2005
usado
30 € Description: Fabrication number: 04404 Max. load capacity: 70 kgApprox. Onsite Dimension. (l x w x h): 300 x 250 x 200 mm, weight approx.: 30 kg ... más información
Año de construcción: 2006
usado
150 € Description: Fabrication number: 1200-075 Load capacity: 1200 kgApprox. Onsite Dimension. (l x w x h): 1,800 x 800 x 1,200 mm, weight approx.: 500 kg ... más información
Año de construcción: 2006
usado
160 € Description: With hydraulic cylindersApprox. Onsite Dimension. (l x w x h): 2,200 x 500 x 600 mm, weight approx.: 250 kg ... más información
Año de construcción: 2006
usado
DBK David + Baader GMBH Industrial Furnace Electrically heated Convection oven Type ITVU 200° TYPE ITVU Identification number 870233 Year of construction 2006 Usable space 2.8 m3 Steam room 3.9 m3 Weight 850 kg Temperature 200° Rated voltage 400/230V 50Hz Power supply 21 kVA Heating capacity 18 kW Rated current 31A Pre-fuse 50 A Protection class IP 43 Exhaust air volume flow 230 m3/h
Año de construcción: 2006
usado
DBK David + Baader GMBH Industrial Furnace Electrically heated convection oven Type ITHU 150° Type ITHU Identification number 871126 Year of construction 2006 Usable space/furnace 8,393 m3 Steam room/furnace 11.5 m3 Weight 3000kg Rated voltage 400/230V 50Hz Power supply 21KVA Heating capacity 18 KW Rated current 30 A Pre-fuse 50 A Protection class IP 43 Highest drying temperature 120° exhaust air volume flow/furnace 95 m3/h
Año de construcción: 2006
usado
NanoFocus μSurf confocal microscope Operation manual laitetori.fi/site/assets/files/6647/operating_manual__nanofocus_surf.p df Technical specifications laitetori.fi/site/assets/files/6647/technical_specifications.pdf NanoFocus® μSurf® confocal microscope offers the unique possibility to precisely measure optically complex surface structures with high vertical and lateral resolution. The number of optical artefacts is minimised. The measurement results and comparisons using surface roughness standards of the Physikalisch Technische Bundesanstalt” show an unique correspondence with the tactile instruments. NanoFocus® μSurf® enables fast, careful and non-contact characterisation, which is most important for sensitive surfaces. Large samples can automatically be measured by stitching basic fields.
Año de construcción: 2006
usado
Used GENIUS B-640 Compact optical sorter. Principle of operation: The product is evenly distributed on the conveyor belt and scanned by cameras and / or lasers on both sides of the different control zones. A few milliseconds later, the defects are rejected in 1 or 2 separate jets by powerful air guns located at the end of the feed belt. A good product continues its way through processing. Electrical requirements Voltage: 400V 3-phase (+ neutral and protective conductor) Power: 4kVA Frequency: 50Hz Compressed air requirements Minimum pressure: 6-7 bar (90-100 PSI) (At the entrance of the sorter) Normal consumption: 400/1500 L / min Maximum consumption: 10,000 L / min Water requirements Water pressure: between 1 and 3 bar Temperature: between 5 ° C and 12 ° C
Año de construcción: 2006
usado
This Rotox EPA 572 was manufactured in 2006. A robust machine with a saw blade diameter of 220 mm and operating at a pressure of 6-7 bar, it maintains a high n/min of 5500. Weighing 2235 kg, the Rotox EPA 572 machine we have for sale is ideal for specialized tasks. Contact us for further details. ... más información
Año de construcción: 2006
usado
This STEINHAUER eCAB workCenter HS was manufactured in 2006 in Germany. Machining outer parts of control cabinets and mounting plates. It features a spindle motor operating at 18,000 rpm and offers 12 tool positions with SK30 compatibility. It includes special construction for holding chamfered panels with a depth of up to 290mm and a panel length of 2250mm, with a slot width of up to 10mm. Contact us anytime for further information.