molinos usadas para la venta

35/40/11 VGA Cutting mill for plastics 35/40 VGA, 11 KW, 120-200kg/h. Insertion opening mm: 420×380 Rotor diameter mm: 350 Throughput kg/h: 120-200 Rotor blade quantity/mm: 6 x 200 Stator knife number/mm: 4 x 200 Motor KW: 11,0 Dimensions mm: 1180x780x1970 Weight kg: 950 options: With material blower 4.0 kW Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.

Drive motor 37kw (can be enlarged to max. 75kw) Rotor diameter 500 mm Width 600 mm 5 knives bevel cut Hinged housing, with 2 stator blades, Inlet opening 500 x 600 mm ... más información

Profile granulator, with inclined trestle and hopper for plates. ... más información

Currently without electric circuit ... más información

Rotor 500 mm diameter x 1000 mm width, housing with 6 rows of stator blades Granulator with high cutting sequence for fine grinding Drive motor 90 kW Typical applications are all cuttable materials such as pulp, paper, rubber, foam, etc.  ... más información

Twin-shaft shredder Drive 37.50 kW  ... más información

Propulsion: 22 kW With control cabinet and sound insulation  ... más información

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Propulsion: 110 kW  ... más información

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding  ... más información

Power supply: approx. 400 x 1250 mm Rotor width: approx. 1250 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 9 Propulsion: 75 kW  ... más información

Inlet: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm  ... más información

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4  ... más información

Engine: 160.0 kW Rotor diameter: 800 mm Rotor width: 1200 mm  ... más información

60” x 22” Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box – ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls – Rolls Stop / Rolls Start / Inch Reversetart / Inch

Buzuluk 84inch Two Roll Mill (Double Roller) Year 1986 Roller diameter 660 mm Length of roller 2100 mm Number of rollers 2 Drilled rolls Speed of the rear roller 36,2 m/min Speed of the front roller 29,6 m/min The ratio of the gear wheels 1 : 1,22 The roller bearings antifriction The consumption of the cooling water 12 m3 per hour Maximum gap between rollers 30 mm The main electric motor 160 kW, 985 operating speed/min, 380V, 50 Hz Gear ratio of gearbox i = 10 Machine dimension L x W x H 5500 x 4000 x 1960 mm Machine weight 35 860 kg

Meccaniche Moderne Two Roll Mill 1000mm (40”) wide x 400mm (16”) diameter Smooth rolls Motorised nips Tray fitted beneath mill rolls Complete with motor and control panel Compact Mill  ... más información

Robinson 60” (1500mm) x 22” (550mm) Two Roll Mill Hand operated nips Water cooled rolls Rotary joints for steam heating / water cooling Electric Autostop (kicked reverse stop) Lunn Safety Bar Bull wheel drive The Mill sits on a fabricated bedplate With Gearbox, Motor and Control Panel  ... más información

Two Roll Mill 42inch wide x 16inch diam. Right angle drive Brook Crompton Motor 50HP Lunn Safety Bar front and back of Mill Hand operated nips Compact  ... más información

M. No.: 0392 Equipment / Additional information: Feeding width (mm): 500 Kw: 7.5 A: 380  ... más información

Cutting Mill - Wanner C17.26 Year of construction: 1999 Slow-rotating granulator with gearbox Power: 3 kW 2 stator knives, 12 rotor knives, the sieve - interchangeable Funnel inlet: 240x300 mm Grinding chamber opening: 240x170 mm It is very easy to clean the mill, which is especially recommended if the color of the ground fabric is changed often Price: On request