subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 834)
Semi-automatic wire comb binding machine ( wire -O ) RENZ AUTOBIND 420 for books and calendars with hanging system KAS 200 built in 1997 Serial No.: 7108 Spiral length from 60-420 mm Speed max. 1800 cycles/h. including tools 3/16", 1/4", 5/16", 3/8", 7/16", 5/8" and 7/8". ... más información
Masch. Nr.: 813 Format maximum 340 x 450 x 80 Format minimum 80 x 110 x 2 Capacity 200 - 240 / h for series production 120 - 140 / h with changing book sizes ... más información
Format: max.: 130 x 200 x 28 mm Format: min.: 6 x 65 x 4 mm Rate: 35/min Machine is equipped with suction rails for flexible. including various spare parts. ... más información
Wire-O binding&closing machine Make GBC Model TL2900 Year Working width 290 mm Details electric Available direct ... más información
Schmedt Präleg XL HHS1810 Year 1998 Minimum size 80 x 110 x 2 mm Maximum Size 450 x 440 x 80 Speed up to 200 cycles per hour Details Refurbished & with waffled glue roller appliance ... más información
Foil stamping - embossing Make PB&E Model Comet Year 1980 Size of the plate 150 x 200 mm Foil transport Automatic by pneumatic arm Condition machine can be purchased refurbished or "as-is" Details automatic foil transport (adjustable foil pull) adjustable embossing time, automatic table movement Available Direct
Perfect binder - cold glue Gantenbein Model Bufalo BAFC-33 Year 1970 Working width 330 mm Speed up to 240 cycles per hour Grinding roller sand paper roll and grinder knife roll Details automatic movement of the wagon Available Direct ... más información
Perfect binder - cold glue Gantenbein Model Bufalo BAFC-33 Year 1966 Working width 330 mm Speed up to 240 cycles per hour Grinding roller sand paper roll and grinder knife roll Details automatic movement of the wagon Available Direct ... más información
Make Jori machine Model JBT50/4D Year 2018 Speed up to 1.800 cycli per hour Book thickness 3-50 mm Min book size 160 x 120 mm Max book size 450 x 300 mm Cover material 80 - 300 gram Block preperation Milling station with dust extraction Glue system Hot melt glue with 2 application rollers and side glue Cover feeder Automatic airfeed with nipping Foot print 3500 x 1520 mm
Casing-in machine Make Schmedt Model Präleg XL HHS1815 Year 1999 Minimum size 80 x 110 x 2 mm Maximum Size 450 x 440 x 80 Speed up to 200 cycles per hour Details optionally we can supply the machine with a waffled glue roller Available direct, after order machine will be completed with a cover, 2 leak trays, etc.
Year of construction 1997/1999 Format: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Envelope size: max 642 mm; min 203 mm Capacity: max 12,000 c/h Equipment Gathering machine • 18 stations • Investor 3691 • Diverter 3614 Controls • Double and faulty sheet control • ASAC automatic self-adjusting caliper Intermediate building blocks • Set-up element • 3 vibrating element • coupled with Bookbinding • Milling and roughening station • Hotmelt backing glue • Hotmelt side gluing unit • 2 Premelters • SF Shed Envelope Feeder • SF envelope pressing • Plate chain depositing tape Cooling section • approx. 30 m • inline with Three-knife trimmers • Three-knife trimmer MM Zenith 3672 Stacker • Muller Martini compensating stacker Standards • Standard accessories •Operat ...
2020 Type: PBW12.956/300 PUR - gluing device with remote diagnosis with cooling and drying sections with three cutters – System DGR D09 With compressor in-house compressed air supply / chip extraction located: Germany Available: immediately ... más información
Kolbus Perfect Binding Line, Equipped With: Gathering Machine: Kolbus ZU 804, AGE: 2006, Basic Frame with 21 Gathering Stations, 20 Standard Feeders, 1 Hand Feeding Station, Book Block Feeder, ZA 800 Stacker Delivery, AGE: 2006, Kolbus VA 422 End Sheet Unit, AGE: 2006, Air Center Becker CS ZU804/01 Vacuum Unit, AGE: 2006, Reject Unit AS 841 To The Right, Integrated Jogging Station, Transfer Channel As Connecting Unit To The Binder. Perfect Binder: Kolbus KM 473, AGE: 2006, 32 Clamps, Hand Feeding, Co-Pilot System Monitor, Main Milling Station, Equalized Milling Station, Notching Station, Micro-Notching Station, Brushing Station With Roller Brush, 2 x Pre-Melters LH 370, AGE: 2006, Nordson PUR Spine Gluing System, Hotmelt Spine Gluing Unit, Hotmelt Side Gluing Unit, Gauzing/Lining Station, IR Heating At Curve, Scoring Station For 4 Scores, 2 Pressing/Nipping Stations, Stream Cover Feede ...
Muller Martini Perfect Binding Line: Equipped with Perfect Binder: Muller Martini Alegro A7, AGE: 2014, 19 Clamps, Solema Book Block Feeder, Endsheet Feeder, Milling Station, Spine Preparing Unit, Hotmelt Spine Gluing Unit, Premelter, Hotmelt Side Gluing Unit, Premelter, Gauzing Station, Drum Cover Feeder with Scoring Unit, 2 Pressing Stations, Laydown Device, Size Range: max. 480x320x65mm, min. 100x100x1mm, Speed: Max. 7.000 Cycles/Hour, Transport and Drying Line, Inclusiv Emergency Delivery, Three Knife Trimmer: Granit 3676, AGE: 2014, Right Hand In-Feed, Off Cut Delivery Belt, Size Range: Cutted: Max. 351x305x80mm, Min. 125x75x3mm, Uncutted: Max. 400x320x80mm, Speed: Max. 2.500 Cycles/Hour, Stacker Uno 1534.0412, AGE: 2014, Size Range: Max. 500x320x70mm, Min. 140x100x4mm, Speed: Max. 16.000 Cycles/Hour
Automatic cover feeder 1 clamp PUR gluing unit LCD touch Screen Box delivery Compressor Book size 120x120 - 420 x 360 mm, Spine thickness 2-50 mm Cover size 120x240 - 420x780 mm Max speed 200 books/hour Machine checked and cleaned. ... más información
Amtmann Fassong banding machine / laminating machine. Year of construction: 1986 Step 1: Foil blanks are separated from the stack by the vacuum plate and partially glued via the gluing unit Work step 2: The A4 cardboard blanks from the additional cover sheet feeder with conveyor belt are separated and transported to the transfer position. Step 3: The partially glued film blank is transferred to the positioned A4 cardboard blank for transfer to the final position. Step 4: Transport by means of a pressure unit. Suitable for solid, shape, edge or strip gluing, depending on the design of the glue transfer roller in time, from different carriers, such as punched blanks, etc. The Fasson banding machine is designed to speed up the production cycle.
Horizon BQ 270 Year of construction: 2010 Meter reading: only 160,000 Robatech concept B side gluing Stages HB4004 Premelter Book spine gluing SI 270 Auto. Caliper At call! ... más información
Make Prakma Model EH-1 Year +/- 1970 ́s Roller width 370 mm Booksize 100x80x2 mm - 370x280x70 mm Speed 300-900 cycles per hour ... más información
Four head paperdriller Make Hang Model 114-4 Year 1997 Details 4 head paper driller with tabulator Operation Electric footswitch Available Direct ... más información