retificadoras usadas para venda

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

GEIBEL UND HOTZ FS 420 SC surface grinding machine manufactured in 2006 in Germany, is designed for single or serial grinding of workpieces. The machine, distinguished by its high performance and reliability, machines workpieces with a maximum weight of 150 kg with the circumference of grinding discs on a magnetic plate with holding force control and demagnetisation function. During the process, special sensors ensure that the grinding wheel is properly balanced, guaranteeing the highest precision and quality of machining. The GEIBEL & HOTZ FS 420 SC magnetic grinding machine uses an energy-efficient hydraulic system to drive the work table, which provides the exact oil flow required to move the table. The pump is equipped with special filters to remove ferromagnetic impurities and non-magnetic substances from the coolant, resulting in safe and trouble-free operation of the grinding m ...

TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...

PONAR KOWARY NUA 25 tool grinding machine was built by the Polish company PONAR KOWARY (LAKFAM) in 1984. A machine characterised by a robust construction of high stability, is used in tool shops and workshops for precision grinding of tools and tooling. Grinding of workpieces is performed on a table with a surface area (L x W) of 915 x 135 mm with two handwheels for manual longitudinal movement (X axis) and transverse movement (Z axis) of the work table. The reliable grinding wheel spindle moving at 3850 and 5635 rpm guarantees rapid and precise machining. The total weight of the machine is 910 kg. The machine is offered with the extensive range of equipment shown in the attached photos, which includes: – driven divider to the instrument along the screw line – angle vice 2 pcs. – moving tailstock: 2 pcs. – 3-jaw chuck fi 160 + spanner – workpiece centre positioning tool ...

JOTES SOH-10 internal grinding machine was built in Poland. The SOH10 grinding machine is used in the finishing process to give the right shape and surface roughness to holes with a diameter from 10 to 100 mm and conical holes with a maximum apex angle of 30°. The high-performance spindle machines workpieces with a maximum diameter of 300 mm (with guard) or 450 mm (without guard). The total weight of the machine is 2900 kg. Technical parameters of the JOTES SOH-10 internal grinding machine - minimum hole diameter: 10 mm - maximum hole diameter: 100 mm - maximum hole length: 160 mm - maximum diameter of grinded workpiece (with guard): 300 mm - maximum diameter of grinded workpiece (without guard): 450 mm - spindle rotation speed: 70-700 rpm - manual spindle feed (1 wheel revolution): 2,5 mm - largest spindle turning angle: 15° - lateral manual feed of spindle (forward): 50 m ...

SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...

ELB SHLIFF SWBD-30 VA II surface grinding machine was manufactured in 1970 in Germany. The machine is equipped with an electromagnetic table consisting of three electromagnetic clamping plates, each 3000 mm long and 450 mm wide. It is possible to process workpieces on the work table of the magnetic grinder with a length of up to 3000 mm, width of up to 500 mm and maximum weight of 2000 kg. The grinding height depends on the grinding wheel wear – with a new grinding wheel it is possible to grind the workpiece with a maximum height of 450 mm, while with the used grinding wheel the grinding height is 540 mm. Grinding machine ELB SHLIFF SWBD 30 has also a mandrel for balancing grinding wheels, holders for grinding wheels and electro-automatic magnetic pole switch in electromagnetic plates. The machine underwent a complete overhaul carried out in 2002 by the Polish company JOTES. Tech ...

PEMAMO MDR 120E horizontal honing machine was manufactured in 2002 by the Swiss company PEMAMO HONING PHOSA SA. The machine is used for specialised honing of bores, such as piston cylinders, in order to achieve the required dimension, tolerance and high surface quality. Thanks to the honing machine, shape defects such as scratches, axis curvature or waviness are removed. The honing machine performs finishing of bores with diameters from 1.5 mm to 40 mm, using a spindle rotating from 310 to 1860 times per minute. The horizontal honing machine is provided with an AR 340 semi-automatic expansion unit with a repeatability of 1 µm. The total weight of the machine is approximately 135 kg. Technical data of the PEMAMO MDR 120E honing machine - minimum honing diameter: 1.5 mm - maximum honing diameter: 40 mm - rotational speed of the spindle: 310-1860 rpm - semi-automatic expansion un ...

JOTES SPD 30B surface grinding machine of Polish production is a manufacturing machine with horizontal spindle axis that performs grinding on the periphery of the grinding wheel. The workpiece of maximum length 1000 mm and width 300 mm is mounted on a rectangular electromagnetic table or directly on the grinding machine table. The work table moves on the base guideways and the change of its direction of movement can be performed automatically by bumpers or manually by adjusting a suitable lever. The hydraulic drive of the machine’s work table allows continuous adjustment of the speed in the range from 2 to 30 m/min. The installed grinding wheels, with a diameter of 350 mm and a width of 63 mm, are driven by an electric motor mounted directly on the grinding wheel spindle. The grinding wheels are moving at a peripheral speed of 26 m/s. The total weight of the magnetic surface grin ...

MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - dimensions: 260 x 220 cm  ... mais informação

STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...

The ZVL BRH 40A II surface grinding machine was manufactured by the Czechoslovak concern ZVL, the Powaska Bystrzyca bearing production plant in 1985. The grinder is designed for grinding flat surfaces of various metal products, with a maximum length of 1500 mm, a width of 470 mm and a height of 500 mm. The machine has a work table with dimensions of 400 x 1500 mm and a 7.5 kW spindle, rotating at a speed of 1920 rpm. The total weight of the grinder is 4520 kg. The machine is offered with accessories. Characteristic parameters of the surface grinding machine ZVL BRH 40A II - working surface of the grinding table: 400 x 1500 mm - maximum grinding length: 1500 mm - the longest longitudinal table travel, manual: 1700 mm - maximum width of grinding: 470 mm - maximum height of grinding: 500 mm - the greatest load of the working table: 500 kg - the greatest transverse travel of the  ...

The Stanko 3B70V surface grinding machine was manufactured in 1976 in the USSR. The 3B70V grinder is designed for grinding flat surfaces of various products with a maximum height of 320 mm and a weight of up to 50 kg. The machine has a working table with dimensions (L x W) 400 x 160 mm. The grinding wheel of the grinder has a diameter of 200 mm, and the power of the machine's electric motor is 1 kW. Technical data of the Stanko 3B70V magnetic surface grinding machine - dimensions of the working table (length x width): 400 x 160 mm - grinding wheel diameter: 200 mm - maximum weight of the workpiece: 50 kg - maximum height of the workpiece: 320 mm - electric motor power: 1 kW - dimensions (L x W x H): 1465 x 1950 x 1610 mm - total weight of the Stanko 3B70V grinder: 1500 kg

Grinding length 500 mm Grinding width 250 mm Workpiece height 375 mm max. table load 350 kg Table longitudinal movement 525 mm Table feed 2-28 m/min Total power requirement 4.5 kW Machine weight approx.1900 kg Control NC Height: approx.2.60 m Width: approx. 2.10 m Depth: approx. 2.00 m Total weight with cooling lubricant container: approx. 2.3 t.

Inv. Num. : 7573 Type: BB-T6 Produzent: Erzeugt: Parametern: Die Mühle ist in einem guten technischen Zustand  ... mais informação

Inv. Num. : 7361 Type: MS 248 Producer: STANKO Generated: Parameters: The mill is in good condition.  ... mais informação

Inv. Num. : 7292 Type: FS30 Producer: LINDNER Created: GO 1999 Parameters: Machine weight: 3900 kg The grinder is in good condition.  ... mais informação

Inv. Num. : 7293 Type: FS30 Producer: LINDNER Generated: Parameters: The grinder is in good condition.  ... mais informação

Inv. Num. : 7417 Type: BSM 1300 RRDB Producer: RWT Created: 2015 Parameters: Vacuum belt width: 1300 mm Diameter of grinding rollers: 180 mm Feed roller diameter: 50 mm The thickness of the workpiece: 0.5-160 mm Abrasive belt speed: 18 m/s Weight: 2840 kg  ... mais informação

Inv. Num. : 7471 Type: UPFS 150/88 XYZ Producer: DOEBELI Created: 1991 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 h Equipment: Filtration Coolant tank  ... mais informação