serras usadas para venda

A band saw with a heavy-duty roller conveyor with mechanical stop (7760 mm) is offered Cutting diameter can be read in the pictures. Coolant tank capacity: 20L Power supply 400V  ... mais informação

Aluminum mitre circular saw machine with stop Specifications: - Saw blade dimensions 400 x 3.8 x 40 mm - Saw blade speed 3200 rpm - Pneumatic saw blade feed - Cutting range at 90° approx. 150 x 80 mm - 100 x 120 mm - Mitre adjustable left + right - Compressed air connection 6 - 7 bar - Air consumption per working stroke 15 L/min - Drive 400 V / 1.5 kW - Space requirement approx. W 650 x H 1100 x D 750 mm - Weight approx. 120 kg -with: - pneumatic vert. - Clamping vice - Pneumatic coolant spraying device - Discharge roller conveyor 3000 mm with Positioning-controlled stop system Make INTERTRONIC , type ROM-3-GLFM with Radio roll measure

Machine Type: Metal Circular Saw Machine Manufacturer: EISELE Model No.: VMS-II-300 Year of Make: 1989 Condition: very good Offer type: used machine Specifications: Cutting range: Ø 100 mm Blade diameter: 300 mm Drive type: el./mech. Drive: 1.4 / 1.9 kW Remark: coolant device, minimum lubrication, Material overlay, Material stop with measuring bar, Replacement saw blade, 4 machine feet Substructure Weight: 200 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.

Machine Type: Semi-Automatic Metal Circular Saw Machine Manufacturer: KALTENBACH Model: KKS 370 H Year of Make: 1975 Condition: good Offer type: used machine Specifications: Blade diameter: 370 mm Cutting range: max. cutting diameter 120 mm Drive type: el./hydr. Drive: 3.7 / 4.5 kW Remark: coolant device, 4 m roller conveyor with measuring bar and material stop, 1 m roller conveyor plus 3 support blocks, 2 spare saw blades, 2 spare clamping blocks Weight: 800 kg The machine is in good and immediately ready condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.

Dimensions: 1150x1500mm  ... mais informação

Axle:XZ (2-axle) Ø 350 Dimensions: 1800x4400x2000mm  ... mais informação

Year: 2015 - technically efficient, ready to work – after full service - disc diameter: 350 mm  ... mais informação

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Carbide saw blade 550 mm Three-phase motor 4 HP, 400 V Turning speed of the saw blade 3070 rpm Indirect transmission motor-carbide saw blade Set of integral protective cover for the cutting area Adjustable exit speed of the saw blade Saw blade shaft diameter 32 mm 2 vertical pneum. Tensioning devices with safety check valves and 1 horizontal pneum. Clamping device with swinging movement Operating pressure 7 atm Air consumption 32 NI at 6 atm per duty cycle Micro-drop lubrication of the cut with pure oil Prepared for chip and smoke removal Positioning of the head for all angle settings from 90° to +/- 20° Numeric display with 5 characters incl. aut. Length measuring device = measuring track 5.7 m and roller track 4.6 m Weight of the machine approx. 830 kg

Blade diameter 350 mm Cutting range: cross-section 90° = 430 mm / cutting height at 90° = 135 mm / mitre cut 45° = 300 mm Suction nozzle diameter 100 mm Motor 2 kW, 400 V Weight approx. 100 kg  ... mais informação

Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Section area, see diagram attached - Swivel range inwards pneumatically 90 - 22.5 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per work cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 8500 x H 1800 x D 1800 mm - Weight approx. 2100 kg -with: - ELUMATEC E 355 control system - Sawing unit swivel and tiltable for high and wide profiles, - as well as screech cuts possible, can be swivelled inwards 22.5°, - Digital degree display - 2 x suction system fixed + moving along - Separate control cabinet  ...

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via gebr. Pipe cutting and chamfasing machine Make GF GEORG FISCHER type RA41 (orbitalum) specifications: Tube outsend diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270rpm. Speed levels electronic 1 - 6 Power 1600 W incl. mounting plate and chassis used, in good condition.

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used