máquinas de produção da janela usadas para venda

Tenon beater, slotted and tenon milling machine FESTO Type: ZA101 5 Aggregates 2 x sawing unit 3x milling unit Guide carriage Mitre stop adjustable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance ...

corner joining press Elumatec EP 120 incl. support arms + tools Available from the end of November 2023 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Tenon cutting and slitting machine Olma ZVA Counterclockwise rotation Finger pressure pneum. Fence Baumann 3500 mm Available from the end of November 2023  ... mais informação

SPECIFICATIONS: Sawing unit Milling unit Pinon cutting unit Including tool set  ... mais informação

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.  ... mais informação

Code: 0010 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

SPECIFICATIONS: Workbench for reading and cutting glazing beads Workbench dimensions: 3000 x 1250 mm Tilt of saw blades: 45° Pneumatic/electric operation  ... mais informação

Window slot machine REX with trimming saw and slot milling L x W x H: 200 x 150 x 160 cm Weight approx. 750 kg Built in 1976 The machine is in good condition, ready to use. This machine is available from October 2018. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Worker-Federhenn pneumatic Cap scissors with table on casters to abbreviate window hardware L x W x H: 170 x 70 x 135 cm Weight approx. 100 kg Built in 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

SPECIFICATIONS: Complete with sawing unit diameter mm 300 Milling unit - spindle diameter 30 mm Manually controlled sliding chimney for tenon cutting  ... mais informação

SPECIFICATIONS: Complete with: - Sawing unit diameter mm 250 for head joint - Vertical milling unit shaft diameter mm 35 (max. tool width mm 340) - Hand trolley with tipping guide Installed power of the 2 motors: 5.5 KW + 2.2 KW  ... mais informação

PIN cutting machine Berrone one-sided for window manufacturing with pneum. Stop 1. trimming saw 2. pivot cutters top / bottom 3. Groove cutter L x W x H: 250 x 200 x 200 cm Year of construction 1983 Weight approx. 750 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

I am selling the Colombo Angelo Figli AM33/AF window angle system. Year of construction 2005. Pin side saw + 620mm spindle fully servomotor. Roll forming side 3 spindle + strip cutting unit fully servomotor. Milling heads VYDONA WOOD EU78-92, wood-aluminum 92 everything programmed into the machine and included / possible to bill if not accepted. Combined power 50KW Weight 6000kg. Compact size, cheap also for small workshops. Available right in stock. Condition very good. Complete system with tools / possible to bill if not accepted. Please contact us for more photos and info.

I sell the Fensterbau Profil Umfälzautomat Zentrum Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 4 pcs. available. Condition very good !  ... mais informação

I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !  ... mais informação

I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !  ... mais informação

FENSTER-UNIVERSAL-DREH-KIPPTISCH RUCHSER-Universal for wing and frame motions. Rotary tipping table with pneumatic tilting device, work platform with 4 loading holes. Height 900 mm-1050 mm adjustable. Lifting device 400 mm 6 storage boxes Fahing facility Used machine without warranty or warranty. Loveling from the Hamburg location unloaded.

Window assembly station, factory WORKER Width about 3000 mm outdated!  ... mais informação

Electronic tenoning machine for door and window frames COLOMBO AT 35 second hand machine CE Standard : Yes machine composed by 2 working units : 1 End-cutting circular saw : Blade diameter mm 400 Motor power Hp 4 Horizontal movement of the blade mm 130 Max. height of cut mm. 125 Tenoning spindle : Automatic tenoning carriage: Stroke mm 1700 Worktable dimensions mm 600 x 1100 Spindle diameter mm 50 Spindle length mm. 620 Vertical stroke mm. 540 Max tool diameter mm 320 Motor power Hp 10 Weight kg 1800 volt. 380/50

Techn. Equipment Ablaengsaege slit spindle 6 tools Fraesspindel 3 tools groove drill Fraesspindel 3 tools Beschlagsnutfraese ... mais informação