subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 210)
Number of spindles: 3 St.Number of tools: 2/3 St.Spindle diameter: 40/50 mm1 OKOMA folding machine model UF 2 EG-------------------------------------1. Energy data:- Operating voltage: 3 phases, 380 V, 50 Hz.- Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 66112. Profile spindle 1:- Spindle arrangement: right- Power 11 kW- Speed 7000 rpm- Direction of rotation: synchronous and counter rotation- Spindle diameter 40 mm- Usable length 252 mm- Tool diameter max. 230 mm- U-movement of the profile spindle- Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch- Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch- Automatic immersion: immersion speed can be regulated for tear-free Fold over- ...
Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus #2654 Weinig Unicontrol 6 with NC spindles----------------------------Specifications summary(please inquire about any additional accessories included)Pos. 1: Crosscut saw----------------------------> Crosscut saw electronically, horizontally infinitely adjustable> Number of tools: 1 pc.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.0 kW> Laser guide light for detecting the sawing sectionelectronic length stop, mounted on slotted table includedPositioning of the cross-cut saw integrated in the control.> Length 3500mmPos. 2: tenoning spindle----------------------------> Number of tools: variable, infinitely variable NC axis adjustment> Tool clamping length: 320 mm> Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis> Sp ...
0: ja Working width: 2500 mm0: nein Ruchser RU-BM-2500 fitting center with fitting storage, mobile------------------------------------------------------Pneumatic stopsPneumatic magazine screwdriverFittings shelfSupport table covered with feltSpecial screwdriverScrew feederfitting punchCustomer processed Siegenai Titan AF fitting.Can be adjusted to other fittings.(Technical information according to manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 6000 mmWorking height: 3000 mmNumber of cylinders: 4 St.loading dimensions L x W x H: 7.175 x 1.600 x 3.790 mmweight: 3700 kgCasolin Euro-------------------------HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. EUROFrame press in an extremely stable steel construction. The machine also allowsthe pressing of already milled wing and frame parts.Working dimensions: 6000mm x 3000mmInstallation dimensions:Total length: approx. 7,175 mmInstallation height approx.: 3,790 mm + 340 mm (cylinders look when pressedmaximum pressing height above) = 4,130 mmLoading dimensions:Length: approx. 7,175 mmHeight: approx. 3,790 mmWeight: approx. 3,700 kg(technical data according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece length: 3200,5100 mmprofile spindle: 1 Stückmain drive: 12 kWControl: Beckhoff CNCNumber of axles: 5 St.Masterwood Project 385 CNC-Bearbeitungszentrum---------------------------------------------5- Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, TreppenKurze Zusammenfassung:---------------------------------------------Arbeitsbe reich:X = 3200 mm (Optional 5100 mm) , Y = 1500 mm, Z = 200 mm1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme1 Stk. fest installierter Bohrkopf mit 19 Spindelnmit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtungmit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtungmit 2 doppelten Horizontalbohrspindeln X-Richtungund 1 doppelte Horizontalbohrspindel in Y-RichtungSägeaggregat in Bohrkopf integriert27 Werkzeugwechselplätze:Karussellwerkzeugwechsler mit 22 P ...
0: ja, freitstehend Working width: 3000 mm0: ja RUCHSER sash assembly table RU-BM-3000---------------------------------------The Ruchser sash fitting center enables efficient production based on economic aspects. Well thought-out down to the last detail, the system offers maximum ease of use.Important advantages for you:Modular system, the sash assembly table is put together according to your wishes and requirementsEasy to use even for inexperienced workersEquipment demonstration machine, alternative / optional equipment on request!Pos. 1.0: Article no. : 0610000RU-BM-3000, sash assembly table, for sashes up to max. 2500 mm in heightwith RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of the work platform manually adjustable.Holder for fitting scissors or fitting punch.10 pieces swiveling commuters for hanging theWing, completely pneumatically foldable forunhindered ...
Working width: 4000 mmWorking height: 2600 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 5300 x 1250 x 3330 mmS&S frame press type RP 2000,-----------------------------C E - versionStable frame welded construction made of thick-walled special hollow profiles,Sliding carriage and pressure bar with 50 mm hole pattern.Continuous abutment on the left for width compression, lower abutmentin two levels.Vertical press cylinder on special pressure bar with one-hand quick adjustmentwith weight compensation in the 50 mm hole pattern, height-adjustable, longSliding carriages ensure thepermanent absorption of high pressing forces.Fast, smooth width adjustment with ball-bearing carriageCentral locking, fixation in 50 mm hole pattern.Upper horizontal press cylinder infinitely adjustable in height and withEquipped with counterbalance.Lower horizontal press cylinder with center holes for the twoAbutme ...
max. workpiece length: 3200/5100 mmprofile spindle: 1 Stückmain drive: 12 kWControl: Beckhoff CNCNumber of axles: 5 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
0: 3000 mmWorking height: 2500 mm0: ja jaGlazing press with equipment-----------------Working dimensions:Length: 3,000mmHeight: 2,500mmTotal length: 3,700 mmSystem height: 1,900 mmPress beam height: 2,200 mm-----------------Manual width adjustmentHeight adjustment pneumatic lifting device 500mm-----------------(Technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L,W): 1400 x 1750 mmWeight: , kgtiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4---------------------------------------Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazingEquipment demonstration machine, alternative / optional equipment on request!Pos. 1.0: Article no .: 8820000RU-MKS-1,4 assembly tilting tableBasic dimensions 1400 x 1750 mm, extended 3400 x 2500 mmSupport surface with 3 support bars, 2 of which are adjustable,one permanently mounted on the upper extension,covered with felt. Support surface with width andHeight / depth pull-out. Pneumatic tilting device,Payload 130 kg. Actuation via foot valve.Roller conveyor can be folded down manually and pulled out to the sidefrom 1400-2500 mm, roll length 140 mmclosed. Roller conveyor height in verticalTable position adjustable from 300-380 mm,Ho ...
Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Dimensions (length / width): 4800 x 1600 x 2400 mmweight: 1500 kgGötzinger Power Drill Type BF 297With the Götzinger PowerDrill you can, depending on the type and design:Griffoliven drill on the loose frame part or for finished wings,with multi-spindle drilling head, quick-change, also for millingof the lock case for WK 2 or intermediate gearEcklager drill on loose frame part, with Mehrspindelbohrkopf,quick-change, corner-oriented over stop or custom made (tilt window)Drill vertically from above for fitting, pre-drill for clip on loose frame partMilling vertically from above for pushers, profile cylinders, 3-D hingesHorizontal drilling with 2 drilling units, different drilling diameters,Dowel drill front and long side, plywood / fighter, sprouts,Corner connection, front door etc.Milling horizontal ...
Length: 2700 mmWidth: 1100 mmHeight: 850 +- 150 mmengine output: 0,37 kWElectric capacity: 0,5 kwcompressed air: 6 barHorizontal impregnation system Pro flow for individual parts with rinsing circuit.---------------------------------Features:Machine for horizontal flooding of individual parts. The product will go throughflooded a row of nozzles. The excess product is then removed through air jetsblown off.The pump and the air nozzles are controlled automatically and only thenoperated when the workpiece passes through. In this way theCompressed air consumption reduced. The circulation operation ensures minimalproduct consumption.---------------------------------Construction features:structureSturdy steel frame, painted with high-strength, water-soluble products.Machine body made of heat-sealed, thick polypropylene plates.4 independent chambers for inlet, flooding, blow-off and outlet.Hori ...
System: 68/78/88 IVNumber of tools: - St.Bore: 50 mmWindow tools Oppold IV 68/78/88 woodWindow tools Oppold IV 68/78 wood-aluminiumran on Weinig Unicontrol6 with fixed strokes----------------------------------(Technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece length: 4400 mmprofile spindle: 1 Stückmain drive: 19,2 kWCNC machining center MASTERWOOD 4 WIN with automatic loading and unloading--------------------------------------------Specially designed for a rational and flexible wooden window u.door productionHIGHLIGHTS:- Various tool magazines for optimal tooling- Simultaneous feeding with up to 6 workpieces- patented clamping system for optimum machining of workpieces- CNC controlled work table with automatic positioning of the beams andStretcher- Automatic reclamping for changing between external and internal profiling- INTEGRATED windowing software, i. Machine does not have to (but canOf course) be controlled from the office with external industry software.- powerful engine with 19.2 kW HSK-63 E- Loading and unloading conveyorAsk for a quote and see for yourselfunbeatable value for money!VIDEO from the machine attached!At t ...
Number of milling spindles: 2 St.fence: 1 jaworkpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
0: 2750 mmWorking height: 2500 mm0: 300-1000 mmRUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022-----------------------------------------------------Vertical work table with lifting device and turning device. EspeciallySuitable for glazing and sealing wooden windows on both sides.Furnishing:System part covered with feltInfinitely variable pneumatic lifting device,Stroke of 300 mm - 1000 mm, based on roller conveyor heightTurning device for sealing on both sides, with roller conveyor 150 mmroll length2 pneumatic tensioners for clamping the window to the turning deviceVersion with special turning device for pushing through the on theRoller conveyor set up window with applied (closed)turning deviceEquipment demonstration machine, alternative/optional equipment on request!Pos. 1.0: Item no.: 1000000RU-SW3-90° vertical work table forWooden window with turning device forG ...
System: 68/78 IVNumber of tools: - St.Bore: 50 mmOertli window toolsIV 68/78 woodIV 68/78 wood-aluminiumbeen in useon Weinig Unicontrol 6 with CNC spindlesYou are welcome to receive the complete window sections and tool drawingsInquiryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. tool diameter: , mm0: , mmoperating pressure: , barfilling amount: 52 lQuicksonic QS 520------------------Ultrasonic cleaning device with lid and work basketUsable dimensions: L 500 x W 400 x H 260Usable basket dimensions: L 444 x W 364 x H 224Content: approx. 52 lThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: ja, 30 Faecher Working width: 2250 mm0: nein Ruchser RU-BM 2500----------------------Fitting table with fitting shelf 30 compartmentswith olive drilling rigUniqick 2000 screw magazine with feed to the hand screwdriverSelling ex location, can still be viewed in use!(technical information according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenoning spindle: 1 Stk.Number of milling agregates: 4 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus # 6826 Weinig Unicontrol 6 with NC spindles------------------------------------------------Machine can still be seen in use!Technical data summary(please inquire about any additional accessories included)Pos. 1: Crosscut saw------------------------------------------------> Number of tools: 1 piece.> Spindle speed: 3,000 - 6,000 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above> Laser directional light to detect the saw sectionPos. 2: Rounding unit horizontally at the bottom------------------------------------------------> Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Clamping length 25 mm> Spindle speed: 9000 rpm> Tool flig ...