máquinas de produção da janela usadas para venda

max. workpiece length: 3200/5100 mmprofile spindle: 1 Stückmain drive: 12 kWControl: Beckhoff CNCNumber of axles: 5 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

0: 3000 mmWorking height: 2500 mm0: ja jaGlazing press with equipment-----------------Working dimensions:Length: 3,000mmHeight: 2,500mmTotal length: 3,700 mmSystem height: 1,900 mmPress beam height: 2,200 mm-----------------Manual width adjustmentHeight adjustment pneumatic lifting device 500mm-----------------(Technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): 1400 x 1750 mmWeight: , kgtiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4---------------------------------------Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazingEquipment demonstration machine, alternative / optional equipment on request!Pos. 1.0: Article no .: 8820000RU-MKS-1,4 assembly tilting tableBasic dimensions 1400 x 1750 mm, extended 3400 x 2500 mmSupport surface with 3 support bars, 2 of which are adjustable,one permanently mounted on the upper extension,covered with felt. Support surface with width andHeight / depth pull-out. Pneumatic tilting device,Payload 130 kg. Actuation via foot valve.Roller conveyor can be folded down manually and pulled out to the sidefrom 1400-2500 mm, roll length 140 mmclosed. Roller conveyor height in verticalTable position adjustable from 300-380 mm,Ho ...

Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Dimensions (length / width): 4800 x 1600 x 2400 mmweight: 1500 kgGötzinger Power Drill Type BF 297With the Götzinger PowerDrill you can, depending on the type and design:Griffoliven drill on the loose frame part or for finished wings,with multi-spindle drilling head, quick-change, also for millingof the lock case for WK 2 or intermediate gearEcklager drill on loose frame part, with Mehrspindelbohrkopf,quick-change, corner-oriented over stop or custom made (tilt window)Drill vertically from above for fitting, pre-drill for clip on loose frame partMilling vertically from above for pushers, profile cylinders, 3-D hingesHorizontal drilling with 2 drilling units, different drilling diameters,Dowel drill front and long side, plywood / fighter, sprouts,Corner connection, front door etc.Milling horizontal ...

Length: 2700 mmWidth: 1100 mmHeight: 850 +- 150 mmengine output: 0,37 kWElectric capacity: 0,5 kwcompressed air: 6 barHorizontal impregnation system Pro flow for individual parts with rinsing circuit.---------------------------------Features:Machine for horizontal flooding of individual parts. The product will go throughflooded a row of nozzles. The excess product is then removed through air jetsblown off.The pump and the air nozzles are controlled automatically and only thenoperated when the workpiece passes through. In this way theCompressed air consumption reduced. The circulation operation ensures minimalproduct consumption.---------------------------------Construction features:structureSturdy steel frame, painted with high-strength, water-soluble products.Machine body made of heat-sealed, thick polypropylene plates.4 independent chambers for inlet, flooding, blow-off and outlet.Hori ...

System: 68/78/88 IVNumber of tools: - St.Bore: 50 mmWindow tools Oppold IV 68/78/88 woodWindow tools Oppold IV 68/78 wood-aluminiumran on Weinig Unicontrol6 with fixed strokes----------------------------------(Technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 4400 mmprofile spindle: 1 Stückmain drive: 19,2 kWCNC machining center MASTERWOOD 4 WIN with automatic loading and unloading--------------------------------------------Specially designed for a rational and flexible wooden window u.door productionHIGHLIGHTS:- Various tool magazines for optimal tooling- Simultaneous feeding with up to 6 workpieces- patented clamping system for optimum machining of workpieces- CNC controlled work table with automatic positioning of the beams andStretcher- Automatic reclamping for changing between external and internal profiling- INTEGRATED windowing software, i. Machine does not have to (but canOf course) be controlled from the office with external industry software.- powerful engine with 19.2 kW HSK-63 E- Loading and unloading conveyorAsk for a quote and see for yourselfunbeatable value for money!VIDEO from the machine attached!At t ...

Number of milling spindles: 2 St.fence: 1 jaworkpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

0: 2750 mmWorking height: 2500 mm0: 300-1000 mmRUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022-----------------------------------------------------Vertical work table with lifting device and turning device. EspeciallySuitable for glazing and sealing wooden windows on both sides.Furnishing:System part covered with feltInfinitely variable pneumatic lifting device,Stroke of 300 mm - 1000 mm, based on roller conveyor heightTurning device for sealing on both sides, with roller conveyor 150 mmroll length2 pneumatic tensioners for clamping the window to the turning deviceVersion with special turning device for pushing through the on theRoller conveyor set up window with applied (closed)turning deviceEquipment demonstration machine, alternative/optional equipment on request!Pos. 1.0: Item no.: 1000000RU-SW3-90° vertical work table forWooden window with turning device forG ...

System: 68/78 IVNumber of tools: - St.Bore: 50 mmOertli window toolsIV 68/78 woodIV 68/78 wood-aluminiumbeen in useon Weinig Unicontrol 6 with CNC spindlesYou are welcome to receive the complete window sections and tool drawingsInquiryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. tool diameter: , mm0: , mmoperating pressure: , barfilling amount: 52 lQuicksonic QS 520------------------Ultrasonic cleaning device with lid and work basketUsable dimensions: L 500 x W 400 x H 260Usable basket dimensions: L 444 x W 364 x H 224Content: approx. 52 lThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: ja, 30 Faecher Working width: 2250 mm0: nein Ruchser RU-BM 2500----------------------Fitting table with fitting shelf 30 compartmentswith olive drilling rigUniqick 2000 screw magazine with feed to the hand screwdriverSelling ex location, can still be viewed in use!(technical information according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 1 Stk.Number of milling agregates: 4 St.Spindle diameter: 50 mmControl: Weinig, PC-Nexus # 6826 Weinig Unicontrol 6 with NC spindles------------------------------------------------Machine can still be seen in use!Technical data summary(please inquire about any additional accessories included)Pos. 1: Crosscut saw------------------------------------------------> Number of tools: 1 piece.> Spindle speed: 3,000 - 6,000 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above> Laser directional light to detect the saw sectionPos. 2: Rounding unit horizontally at the bottom------------------------------------------------> Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Clamping length 25 mm> Spindle speed: 9000 rpm> Tool flig ...

Number of spindles: 4 St.Number of tools: 11 St.Spindle diameter: 50,40 mmSpindle length: 285,125 mmlength: 4000 mmwidth: 2000 mmheight: 2200 mmWeinig Univar 10/3 folding machine---------------------------------Machine will be cleaned and chcked before deliveryFor milling around windows, doors and the like with unevencircumferential profiles. Machine suitable for wood thickness 68 to 92 mmTime required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes.The available tool positions are selected using a selector switch on the control panelretrieved.Machine with 3 hydraulically controlled right precisionLifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindleThe spindle stroke takes place in a U-movement, so that the opening is possible for short partsThe milling stop remains as small as possible. Spindle stroke horizontally fineAdjustable for both tool p ...

Dimensions (L,W): , mmWeight: ca. 90 kgadjustable height (yes/no): ja stroke: 300 - 800 mmsurface of working table: 1.700 x 1.500 mmtable width: max. 3.800 mm0: ca. 130 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Number of machnines: 15 StkLoading meters, approx.: - mTotal weight, approx.: - kgCompany closure for wooden window construction--------------------------------------Machines will be available from August/September 2024.Pos. 1: Weinig, PFA 17N, built in 1967Four-sided planer, 6 spindles, chain drive, with glazing bead separation, with planing headsContinuous feed, working width 170 mm, working height 120 mmElectric height adjustment feed beam Pos. 2: MAPO Spu 180, built in 1992, finishing machine, mobile Pos. 3: Gubisch CW 2, built in 1998, angle system with return,with Leitz IV 68 wood, wood-aluminum, Gold IV 78 wood1 slot spindle, 3 profile spindles Pos. 4: Götzinger OBM, built in 1998 corner bearing and olive drilling machine,1 drill head Olive, 1 x drill head corner beari ...

Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Dimensions (L/W/H): 6100x1500x2300 mmWeight: 950 kg1 NEW drilling and milling center Götzinger Power Drill 300With the Götzinger PowerDrill you can, depending on the type and design:- Drill on the front and on the long side- Dowels of front doors, pegs, fighters- The drilling patterns are freely programmable- You can drill: handle slides and corner bearings, with quick-change multiple spindle- You can: Milling lock case, pusher and PZ as well as 3D belts and drill- The machine has a horizontal and a vertical milling unit- A simple control lets you create drilling and milling programs, save and call againBase frame in sturdy design, covered with sheet metalTable top 1800 x 200 mmProcessing unit:X-axis - 500 mm working travelY-axis - 0-120 mmZ-axis - 0-105 mm (above table)Horizontal aggregates:1  ...

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmcontrol: Weinig, PC-Nexus Weinig Unicontrol 12with radial and axial CNC spindles as well as VARIO table and milling carriage Machine can be seen in use for a short time!Technical data summary(please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable> Number of tools: 1 piece.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser directional light to detect the saw section> Axial adjustment path 150 mm NC axis, electronically infinitely variable> Radial pneumatic adjustment path 8 positions for e.g. edge rounding from aboveRounding aggregate > Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Tool clamping length: 25 mm> Spindle speed: 9,000 rpm> Tool diamete ...

Number of motors: 2 Stück0: 2380 mmControl: , 0RUCHSER RU-GL-45°-----------------------------------------------------Glazing bead saw at the sliding work tableDeveloped for cutting glazing beads in pairs on the sliding work tableThe RU-GL glazing bead saw is mounted on a sliding work table withScanning and clamping device fortwo glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuckright saw on carriagemounted to be moved manually. Pneumatic clamping device from above and fromthe side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V.Sliding work table with felt pad, length with side shelf 3300 mm,Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerableCounter bearing for positioning the wings.Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000-----------------------------------------------------for glazing beads up to 30 x 70 mm (W x H) ! ...

Number of motors: 1 Stück0: 2500 mmControl: nein Single-sided glazing bead saw Hecht ES 300 A--------------------------------------swivels from 45° to 45° to fixed stopwith automatic feedpneumatic swivel overmanual swivel stopwith machine base, pneumatic tensionSaw blade HM 300 x 3.0/2.2/30 Z 80 Neg.Touch stroke 1.5 mSupport 1.5 m with supportKey stroke 3 mSupport extension from 1.5 m to 3 m with supportTable inserts grooved for rebated glazing beadsHECHT ASB manual length stop with digital display, 2500 mm(technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.