máquinas de produção da janela usadas para venda

Number of motors: 2 Stück0: 2650 mmControl: , 0Ruchser RU-GLS-ED 45° glass bead saw--------------------------------------Developed for cutting glazing beads in pairsThe RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. theMachine was designed for cutting glazing beads in pairs with acutting angle of 45° and features a fixed and amovable saw unit. The manual length adjustment is equipped withan electrical digital display. It can cut lengths from 240mm - 2650mmbe sawn. During the cutting process, the glazing beads with apneumatic clamping device clamped from above and from the front to prevent tiltingto prevent the glazing beads. Operation is via a safetytwo-hand operationItem 1: RU-GLS-ED45° double glazing bead saw-----------------------------------------------------with manual measurement, for the pairwiseCutting glazing beads, cutting angle 45°.Manual length  ...

cut-off saw: 3 KWSpindle diameter: 50 mmSpindle length: 300 mmNumber of tools: 3 St.connected load: 12 kWHaberkorn FZS 1 Studio tenoning and slotting machineMachine is still being checked------------------------------------------------------The compact tenoning and slotting machine forthe unusual window constructions.If you have the highest demands on a tenoning and slotting machineand easiest handling, you can meet them with the FZS 1 Studioright choice.This single shaft tenoning machine with 3 automatic tool positionscontributes to reducing downtimes through quick tool changes and aspecial swivel table for the production of studio windows and segments forArched window.The studio table developed for this purpose has special features that...enable rational work.Precise angle degree display via rotary encoder with 1/10 degree display. displayin the control panel.The splinter wood stays in ...

Number of motors: 1 Stück0: 2000 mmControl: manuel STRIFFLER glass bead saw 2733Miter cut 45 degrees with manual feed, pneumatic slot stopfor glazing beads with slots and tenons, manual length stop with scale.Self-dismantling and loading by buyerOR alternatively through us, then costs 50 euros(technical data according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3.700mm, 5.100mm, 6.100mm mmWorking height: 160 mm0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Working width: 4500 mmWorking height: 3000 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 5600x1350x3550 mmWeight: 3000 kgS&S frame press Bavaria 2000 L---------------------------------With automatic pressing cycle + manual controlfor corner connections tenon+slots and dowel connection/caulked tenon,Can be changed via selector switch on the control cabinet.With basic equipment for optional use of counter profiles if the sash is onloose part can be folded over.CE versionBasic machine in the strongest welded frame construction,with thick-walled special hollow profiles.Guideways of the pressure beams for the press cornersin a low-abrasion machined version.Fast, smooth, manual width adjustmentthanks to ball bearing carriage, fixation in 50 mmHole grid, optional motorized width adjustment withwith hydraulic clamping (for an additional charge).Height adjustment and pressing using long-stroke  ...

Working width: 3648 mmWorking height: 2485 mmNumber of cylinders: 6 St.Maweg Euronova Quickomat frame press----------------------------with automatic measurement adjustment.Cylinder max. opened (maximum working dimensions)W 3,648mm x H 2,485mmTotal length: 4,720mm + 400mm control unitTotal height: 3,550 mm(technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. tool diameter: 400 mm: 180 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

max. tool diameter: 400 mm: 310 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

Length: 5000 mmWidth: 750 mmHeight: 3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

max. workpiece length: 4500,6000 mmprofile spindle: 3 Stückmain drive: 24 kWControl: Siemens 840d Working Process Logos Life Evo XS 2345-------------------------------Vollautomatisches CNC-Fensterfertigungsanlage mit automatischerBe- und Entladung.2 Portale mit 3 Frässpindeln mit 4- und 5-AchstechnologieCNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität undProduktivität128 WerkzeugplätzeNEU:Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie fürkleinere Betriebe!Nebenstehend finde Sie aktuelle Videos dieser Baureihe.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung------------------------------------------------------ ----------komplett wie folgt :- Fahrbare Ausführung- Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert.- 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung- Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet- pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen fürnur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm.Dübellänge : min. 25 mm. – max. 60 mm.Tiefeinsetzen = 30 mm.Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung fürelektronische Dosierung in Verbindung ist, gespritzt .- Flexibler Arm mit Gegengewicht zu ...

: 3000 Working height: 2500 mm: 300-800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmControl: CNC, Weinig PC-Nexus Weinig Uncontrol 12with radial and axial CNC spindles and VARIO table.. The machine has already been professionally dismantled and stored in 73447 OberkochenSpecifications summary(please inquire about any additional accessories included).. crosscut saw.. > Crosscut saw electronically, horizontally infinitely adjustable> Number of tools: 1 pc.> Spindle speed: 3000-6000 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser guide light for detecting the sawing section> Axial adjustment path 150 mm NC axis, electronically stepless> Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from aboverounding aggregate.. > Position: horizontally below> Axial adjustment path together with the crosscut saw.electronic length stop.. > Length 450 ...

Table dimensions: 1000,400 mmpneumatic clamping: 4 St.moveable: Option For fast compression of Minizinken- or Softline compoundsespecially for larger cross-sections- Independent of the angle- Especially suitable for arched manufacturing- Table size 1000 x 400 mm- Pneumatic connection 10 bar- Air consumption 1 cdm / stroke- 4 clamping cylinders for workpiece clamping- Pairs switchable- Right half of the table supported on hardened shafts through ball linearbearings- 2 pressure cylinder for linear table displacement, separately switchable- Weight: 200 kg- CE - execution(Technical details according to manufacturer - without guarantee.!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Bore diameter: variabel mmNumber of heads horizontal: 1 St.Number of heads vertical: 0 St.1 Götzinger Dübelleim- und Einpressmaschine BLEGrundgestell in stabiler Schweisskonstruktion, mit Blech verkleidetTischauflage ca. 200 x 1160 mmPos. 11 Leimstation VollstrahlventilLeimmenge exakt einstellbar Leimpistole für Gegenlochbeleimung Pos. 21 Leimpumpe aus Edelstahl, Hochdruckpumpe und Leimschlauch Pos. 31 Einpressstation mit Dübelvereinzelung und Einpresszylinder Pos. 41 Schwingförderer für Dübel d 8 x 60 mm mit Zuführschlauchin das Einpressaggregat Pos. 51 Bearbeitungsaggregat mit Kreuztisch, Linearführung und 3-Achs-MotoreX = 200 mm BearbeitungsbreiteY = 120 mm Bearbeitungshöhe Pos. 61 Positioniersteuerung TouchpanelWahlschalter für verschiedene Bearbeitungen:nur bohrennur leimen - einpressenbohren - leimen - einpressenPreis der Pos. 1 bis einschließlich Pos. 6 auf Anfrage !Op ...

: 3400,4550 mmWorking height: 2500 mm: 300 - 800 mmGlazing and control pressRU-VGP3Glazing and sealing press, clamping width max. 3150 mm,Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm,Pressing beam height 2400 mm, plant part covered with felt, installation surfaceas roller conveyor, lifting device from 300 - 800 mm. Left and right eacha role as edge protection for elements up to 2500 mm height.(When ordering specify whether RIGHT or LINKER Pressbar mobile!)alternatively:-------------RU-VGP4Glazing and control press, version like RU-VGP3however span max. 4000 mm, length 4550 mm(When ordering specify whether RIGHT or LINKER Pressbar mobile!(technical data according to manufacturer - without guarantee!)Price on request !The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 2700 mmWidth: 770 mmHeight: 1250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmWeinig Unicontrol 6 with NC spindles-----------------------------------Technical data summary(please inquire about any additional accessories included)...Generally-----------------------------------> Loading dimensions: 7000 x 2400 x 2400 mm> Machine weight, approx.: 3700 kgcrosscut saw-----------------------------------> Electronic crosscut saw, horizontally infinitely adjustable> Number of tools: 1 piece.> Spindle speed: 2800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3 kW> Laser directional light to detect the saw sectionElectronically safe length stop-----------------------------------> Length 3600 mm1. Tap and slot spindle----------------------------------> Number of tools: 3/4 pieces.> Tool clamping length: 320 mm> Spindle stroke vertical adjustment continuously> Spindle spee ...

max. workpiece length: - mmprofile spindle: - Stückmain drive: - kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação