Fabricante:
(Categoria: 301)
Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement ...
Boy 35A VV Year of construction: 2005 Injection unit: Screw diameter: 28 mm Spray weight: 55.8 g Spray pressure: 1577 bar Dosing volume: 58.5 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 280x254 mm Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan CT - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Metrics: Weight: 1350 kg Length/Width/Height: 2.06x0.95x2.74 m Drive: Pumps/motor: 7.5 kW Heating capacity: 5.8 kW Total power: 13.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...
Boy 90 M Year of construction: 2004 Injection unit: Screw diameter: 42 mm Spray weight: 193 g Injection pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tie bar spacing: 430x360 mm Size of clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 1 Metrics: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All of ...
Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of construction: 2016 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...
Ferromatik Milacron Magna T(MTs) 150-450 / production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 45 mm Spray weight: 215 g Injection pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 510x510 mm Size of clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Controls: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter Central lubrica ...
LWB Steinl VCRS-T 300/36 T / machine like new Year of construction: 2006 Injection unit: Dosing volume: 36cc Clamping unit: Clamping force: 36 t Ejector: hydraulic Clamping unit: hydraulic Control: LWB ECO Additional equipment: Hydraulic core pull x 1 Control with air valve The injection unit was made of bimetal Metrics: Weight: 3000 kg All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
with spare screw, high-pressure hose and various spare parts - see pictures ... mais informação
Engel injection moulding machine old ... mais informação
Arburg 270S-400-70 (220) General information SKU: (220) Availability: In stock CTFZQ29N Year of construction: 2008 Brand: Arburg Specifications Injection weight: 17 g Clamping force: 400 kN Stand: Used Screw diameter: 18 mm Injection pressure: 2500 bar Tie bar spacing: 270 x 270 mm Clamping plate size: 385 x 385 mm Tool installation height min.: 225 mm Control: Selogica Language: English,Swedish Power: 16.4 kW Weight: 2040 kg Dimensions: 1.3 x 3.1 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes
Length x width x height of the machine: 8.3 x 2.5 x 2.5 m Machine weight 32000 kg Accessories: Yudo-Star Sigma 1500 Industrial Robot ... mais informação
Length x width x height of the machine: 8.6 x 2.0 x 2.1 m Machine weight 23000 kg Accessories: Yudo-Star Sigma 1500 Industrial Robot ... mais informação
Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No
Cleaned, tested, repaired machine, ready for production. 50 tons clamping force, 320x320 column spacing. 18 screws, 25 cm3 injection volume. 1 core puller, 1 air circuit. The display language is German or English. The handbook is in German. The machine is in very good condition, it can be viewed during operation. A video of his operation was also made. Check out our other ads.
Regularly maintained machine that is always kept in top condition. The screw rotation is done with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF floppy disk. The display can be done in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 auger for technical materials in good condition. A video of the operation of the machine has also been created, which can also be tried out in person at our site. Please see our other ads.
Year of construction: 1997 Clamping unit - Clamping force: 800 kN - Handle width: 400 x 400 mm - Tool installation height 250/ 700 Injection unit - Shot weight (PS): 149 g - Screw diameter: 35 mm Remark: - Dispensing without sprue picker and external Peripherals - Displacement measuring system for Screw movement changed - Hydraulic motor for worm drive Switched in 2019 - 02/2022 Hydraulic hoses changed - Cavitation in pump - Plasticizing unit is needed as a replacement for other machines and is not included! General - 2 core pulls -Machine is still in operation Pump running time - approx. 114,000h Other: -Submission expected June/ July 2024 -for the production of spare parts
Year of construction: 2002 Clamping unit - Clamping force: 700 kN - Tie bar width: tie-barless - Tool installation height 250/ 700 Injection unit - Shot weight (HP): 139 g - Screw diameter: 35 mm Pump running time - approx. 81,042 h Remark: - Dispensing without sprue picker and external Peripherals - VT card 2 defective General - 4 core pulls
Year of construction: 2006 Clamping force: 90 tons. Screw diameter: 35 mm Pump hours: 46393 h ... mais informação