moinhos usadas para venda

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4  ... mais informação

Used Rapid 2690-KURF Grinder, age 2005 Max. Infeed width 900 mm Throughput 500 Kg/ hr Main Motor 15kW Pendulum Roller for infeed tension control Dual Roll Ingfeed, Motor 0.75kW Regrind Outfeed Blower type F-25 , Motor 2.2 kW No. of Rotor Knives 3 No. of Stator Knives 3 Sound Proof Housing

Used Rapid 2690-KURF Grinder, age 2003 Max. Infeed width 900 mm Throughput 500 Kg/ hr Main Motor 15kW Pendulum Roller for infeed tension control Dual Roll Ingfeed, Motor 0.75kW Regrind Outfeed Blower type F-25 , Motor 2.2 kW No. of Rotor Knives 3 No. of Stator Knives 3 Sound Proof Housing

Motor 75 kW Rotor blades: 5 Stator blades: 2 Rotor diameter: 600 mm Bu9dtai0he Rotor width 780 mm Inlet opening: 720x780 mm ... mais informação

Make CONDUX Type CS 450/600-2 Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw ... mais informação

SEM (USA) granulator, model 22, rotor 5 blades, housing 2 blades, opening: approx. 600x400 mm, complete with control cabinet 400 V. 50 Hz, mobile, motor 15 kw.  ... mais informação

Stock # U2333-5 Used cutting mill by Alpine model B32/40 RO. Mill has dimensions of inlet into cutting chamber 400 mm x 355 mm. Rotor is equipped with three knives and has diameter 315 mm x length 400 mm. Working rotation of rotor up to 700 rpm. Mill has 3 static knives. Bottom discharge through screen with mesh about 12 mm. Rotor is belt driven by el. motor with power 18.5 kW, 1500 rpm, 400 V, 50 hz. Mill has stainless steel feeding hopper with inlet dimensions: 390 mm x 240 mm. Mill is equipped with two belt conveyers. First feeding material into mill, has width of belt 250 mm, with baffles each 675 mm. Working length of conveyer 290 cm. Top of conveyer is covered with insulation. Second conveyer is for transport product from mill discharge - also has working width 250 mm, with baffles each 675 mm. Working length 200 cm. Mill has also dust filter with exhaust fan and electric contro ...

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories  ... mais informação

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW  ... mais informação

Plastic crusher, industrial shredder, cutting mills Wanner 20/20 E-SS for sale in very good condition. This slow-speed gear grinder is used next to an injection molding machine or in a separate room for grinding angles and middle parts. Due to the low speed, it is also suitable for grinding low-melting elastomers and sensitive engineering plastics. On the rotating rotor there are 6 knives. The crushing capacity of the grinder is approx. 60kg/h. The mill is equipped with a 4 kW engine.

Engine 2.2-3 kW 2 pieces of it  ... mais informação

Including bottling line Rotor diameter: 320 mm Rotor width: 440 mm Drive motor 11 kW Weight approx. 800 kg  ... mais informação

Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.  ... mais informação

Material: Normal steel Fan percussion More information and price on request The machine is extensively overhauled and then is as new as new.  ... mais informação

AVIAN Engineering Model G46/ 60 Pinch Infeed Rollers Integral Blower Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs ThruPut 300 KG/H Cutting Chamber 620 x 460mm Hopper Opening 620 x 500mm  ... mais informação

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Year: 2018 - technically efficient, ready to work – after full service - engine power: 1.1 kW - hydro-pneumatic cutter feed - two pairs of short stroke clamps - to the movable post  ... mais informação

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed  ... mais informação

VESPA 40/60/30 VGA Granulator for plastics 30 KW, 300-500 kg/h. Insertion opening mm: 620×500 Rotor diameter mm: 400 Throughput kg/h: 300-500 Rotor blade quantity/mm: 6 x 300 Stator knife quantity/mm: 4 x 300 Motor KW: 30,0 Dimensions mm: 1540x1190x2280 Weight kg: 1760 options: Material conveying blower 4.0 | 5.5 | 7.5 | 11 kW and Big Bag filling station. Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.

50/100/55 VGA granulator for plastics 55 KW, 700-900 kg/h. Insertion opening mm: 1020×650 Rotor diameter mm: 500 Throughput kg/h: 700-900 Rotor blade quantity/mm: 6 x 400 Strator knife quantity/mm: 4 x 400 Motor KW: 55,0 Dimensions LxWxH mm: 2400x1700x 3070 Weight kg: 4650 With material conveying blower 7.5 kW and BigBag filling station. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.