trituradores usadas para venda

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1400 x 1600 Year of construction: 2010 Specifications: Main drive power: 1 x 45 kW, 81 A rpm: 1500 Hydraulic drive power: 2.2 kW, 5.0 A rpm: 1.420 Rotor flight circle: approx. 380 mm 40 mm cutting crowns 52 Tools/Cutting Crowns Weight: approx. 5,400 kg Hint: The gearbox housing had a hairline crack, which was glued. (see pictures) It may have to be replaced.

Used granulator Manufacturer: HERBOLD Type: SML 60/100-G3-2 Specifications: Drive power: 75 kW, 140 A 380 V, 50 Hz rpm: 1480 Machine weight: approx. 5,000 kg  ... mais informação

used shredder Manufacturer: BOA Type: ALLIGATOR 550 - 100 Year of construction 2017 Specifications: Drive power: 55 kW Throughput: - 1,5 t/h for fine adjustment, and - up to 6.0 t/h with coarse setting Filler opening: 1,120 Rotor speed: 1,500 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 55 Weight: approx. 5,200 kg

used single-shaft shredder Manufacturer: LINDNER Type: VEGA 1100 L Year of construction: 2013 specifications: Filling volume: 1.7 m³ Working opening: 1,100 x 1,800 mm Rotor length: 1,090 mm Rotor flight circle: 434 mm Rotor speed: 100 rpm. Drive power: 45 kW Pneumatic pusher: 6 bar Weight: approx. 6,000 kg

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

used roll splitting machine Manufacturer: BOA (MBM) Type: RSM Year of construction: 1990 specifications: Roll width max.: approx. 1,800 mm Roll diameter max.: approx. 500 mm Drive power: 3 kW Drive via an electric motor with spindle with task table  ... mais informação

Roll splitting machine Manufacturer: PAAL Type: RS 100 / 200 Year of construction 1992 with screwed-in track roller guide and in closed frame construction specifications: Roll length maximum: 2000 mm Roll diameter maximum: 1000 mm Drive power: 7.5 kW Cutting force: 20 t Cutting speed: 4.8

3 Shaft shredder with HARDOX spirals (approx. 500x1700mm), complete hydraulic system with Brevini gearboxes, new base frame with new steel construction, new hopper 6 cbm, inlet-opening: approx. 1100x1700mm, in addition: 7 reserve spirals available ... mais informação

We offer complete recondioned Scania engines in exchange  ... mais informação

This is a Hammer Mill from Nuova Guseo Italy in great working condition. This Griding Machine, has been recently been refurbished and works perfectly for many applications. 15kw Motor 9 X 4rows = 36pieces of hammers with 6mm thickness Hammers can be turned and used 4 times to all 4 sides Amperage indication on the panel 10 different sieves (9 in the photos one is installed) with diameter Φ1.5mm, Φ2mm, Φ8mm, Φ15mm, Φ16mm, Φ22mm, Φ25mm, 2pcs X Φ30mm. HAMMER MILL – SERIES RAPIDE Between all size reduction equipment, hammer mills are more widely used than any other to grind minerals and fodder. Now thanks to some special features of the mills series RP, they can be used in foodstuffs and chemicals industries too. Of simple, yet robust design, the hammer mills are suitable to meet the most medium size reduction requirements. They can be used to mill various mater ...

Two Shaft Universal Shredder by H&S Scheuten GmbH in Very Good Working Order. It was overhauled and complete refurbished in 2018 by the manufacturing company H&S Scheuten GmbH. Unit Specifications: - Power 30kw - 35pcs 20mm thickness Knives with 4 hooks in good condition - Cutting Chamber 700mm X 300mm Perfect for light shredable material with a very high output. Could be used for: biomass, food recycling, packaging recycling, delumping of brittle material and many other applications.

used scrap shears Lindemann LU800/8 PA60 with 4x 90 kW main drives, shear force 800t, shear width 800 mm, press box length 6 m, ready for operation  ... mais informação

An Arnold rail crusher is offered from the site, consisting of: - Rail breaker with hydraulic system - Feed roller conveyor - Sling device with separating device - Swivel discharge conveyor - Control room The system is operational and still in use.  ... mais informação

Shredder Hammel NZS 700 E 250 kW in need of repair  ... mais informação

- Drum Shredder/Shredder Pallmann - with inlet funnel - Serial number 0806.2006.0017  ... mais informação

Einwellenschredder used in the tire recycling as a rubber mill. 2 motors with each 200 kW. Performance 4 t / h truck tyres.  ... mais informação

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories  ... mais informação

Inlet: approx. 500 x 490 mm Rotor width: approx. 500 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor blades: 3  ... mais informação

- Rotor shears type MEWA UC 201 - Electric drive 2 x 75 kW - Rotor length: approx. 2 meters - Width of the blades: 70 mm - Weight approx. 50 tons - Incl. chain belt conveyor for discharging the product  ... mais informação

Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)