similar results found in category drilling machinery
Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...
Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear-comes from an Alberti drilling rig-max.: 18x drill-Admission:-alternately turning right/left-Distance drill: 50 mm-Distance drill: 25 mm-Number: 2x drilling heads available (1x left/1x right)-Price: per piece-Dimensions: 1090/380/H580 mm-Weight: 210 kg/piece
Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg
Column Drilling Machine ALZMETALL NOLL Spindle: CM3 Spindle exit: 160 mm Table size: 500 x 400 mm Maxi distance spindle nose/table: 600 mm Throat depth: 290 mm Splindle speed by belt variator Spindle motor: 1,3 kW Manual descent 2 speed ranges Superior protection cover is missing Voltage: 380 V Width: 700 mm Depth: 900 mm Total height: 1900 mm Weight: approx 600 kg
Manufacturer: Arburg Type: 320 C 500 - 250 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Max distance between plates: 550 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 1820 bar General Motor: 15 kW Heating: 6,5 kW Dimensions: 3,4 m x 1,4 m x 1,7 m Weight: 2830 kg Screen text: German Additional equipment Robot interface Core pull hydraulic: x1
Consignment 2003 Arburg Allrounder Centex 320 C 500 - 250, 50 t Clamping force 50 ton Screw 30 mm Mold height min 200 mm distance between tie bars 320 mm Daylight between platens 320 mm Mould weight max 0,5 t Shot capacity 106 ccm Weight 2330 kg, L x W 3520x1460 mm control Selogica Core pullers - no Hotrunner zones 12 year of made 2003 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
2003 Arburg Allrounder Centex 320 C 500 - 250, 50 t Clamping force 50 t Screw 30 mm Mold height min 200 mm Distance between tie bars 320 mm x 320 mm Mould weight max 0,5 t Shot capacity max 106 cca Control Selogica Core pullers - no Hotrunner zones - 12 Weight 2330 kg, L x W 3520 mm x 1460 mm year of made 2003 stock number 00657 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
1998 Arburg Allrounder 320 M 500 - 210, 50 t Clamping force 50 t Screw 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 101 ccm Control Multronica Core pullers - no Hotrunner zones - no Weight 2610 kg, L x W: 4100 mm x 1200 mm year of made 1998 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
1996 Arburg Allrounder 320 M 500 - 90, 50 t Clamping force 50 t Screw 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 71 cmm Control Multronica Core pullers - no Hotrunner zones - no Weight 2360 kg, L x W: 4100 mm x 1200 mm year of made 1996 stock number 00660 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
2001 Arburg Allrounder Selecta 320 S 500 - 150, 50 t Clamping force 50 t Screw 30 mm Mold height min 225 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 78 ccm Control Selogica Core pullers - 1 Hotrunner zones - 9 Weight 2250 kg, L x W: 3700 mm x 1100 mm year of made 2001 stock num 00659 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor
BRAND: ARBURG YEAR: 2001 MODEL: 370C-800-250 APPLICATION TYPE: INJECTION MOULDING LOCATION: GERMANY MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: ARBURG INJECTION UNIT SCREW DIAMETER: 35 MM INJECTION PRESSURE: 1823 BAR CLAMPING UNIT CLAMPING FORCE: 800 KN OPENING STROKE: 500 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - CLEAR TIE BAR SPACING HORIZONTAL X VERTICAL : 370X370 MM - MIN. WKZ INSTALLATION HEIGHT: 250 MM - CENTRING RING Ø (DS/AS) : 125/125 MM - MAX. STROKE VOLUME (CM^3) 144 - CORE PULLS:1 - HOT RUNNER CONTROL POINTS: 3 - HANDLING: MULTILIFT
Injection Molding Machine Arburg Allrounder CENTEX 420 C 1000 - 350, 100 t (year 2003) stock number 00653 Clamping force 100 t Screw 45 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 230 ccm Control Selogica Core pullers - 2 Hotrunner zones - 12 Weight 3430 kg, L x W 4250 x 1640 mm year of made 2003 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
Arburg 420 M 1000 - 250, 100 t (1996) Clamping force 100 t Screw 40 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 188 ccm Control Multronica Core pullers - 1 Hotrunner zones - no Weight 3230 kg, L x W 4100 x 1270 mm year of made 1996 stock number 00655 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
Manufacturer/manufacturer: Arburg Typ/type: 420C 1300-250 Year/year: 1999 Control/controller: Selogica Clamping force/clamping force: 1000 kN Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 605 x 605 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 35 mm Stroke volume/shot volume: 144 CC / 132 gram PS spec. Spritzdr / injection pressure: 1820 bar General / General Engine power: 18.5 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.3 m x 1.7 m x 1.8 m Weight/weight: 3180 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robot
BRAND: ARBURG YEAR: 1996 MODEL: 420C 1000-350 PRODUCTION HOURS: 107940 APPLICATION TYPE: INJECTION MOULDING LOCATION: GERMANY MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information INJECTION UNIT SCREW DIAMETER: 40 MM CLAMPING UNIT CLAMPING FORCE: 1000 KN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - CENTERING DIAMETER 125MM - 1 CORE PULL - SELECTION SWITCH - CONVEYOR BELT INTERFACE - ALS INTERFACE - RS232 PRINTER INTERFACE - INKING DEVICE INTERFACE - EUROMAP 12 HANDLING INTERFACE - CONVERTED TO LCD MONITOR - CONVERTED TO CF DRIVE
Manufacturer/Manufacturer: Arburg Typ/Type: 420C 1300 kN-350 Bau-year year: 1999 Control/Controller: Selogica Closing Power/Clamping Force: 1300 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 605 mm x 605 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 182 cc/166 gram hp Spez. Spray./injection pressure: 1670 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weicht/Weight: 5100 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core Pulling: x1 Euromap Vario
Arburg 4220C-1000-290 (208) General information Product Code: 208 Availability: In Stock Year of production: 2008 Brand: Arburg Technical data Shot Weight: 131 g Clamping Force: 1,000 kN Condition: Used Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 420 x 420 mm Platen size: 570x 570 mm K8sbfm2u Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 46 kW Working hours: 87.026 h Weight: 3740 kg Dimensions: 4.4 x 2 m Core pull: Yes Euromap: Yes
1997 Arburg 420M 1000-250, 100 t Clamping force 100 ton Screw 30 mm Mold height min 250 mm distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 106 ccm Weight 3230 kg, L x W 4100x1270 mm control Multronica Core pullers - 2 Hotrunner zones - no year of made 1997 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
Manufacturer/Manufacturer: Arburg Typ/Type: 420C 1000-350 Bau-year year: 1999 Control/Controller: Selogica Clothing Power/Clamping Force: 1000 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate's Platen Size: 650 mm x 650 mm WZ Einbauhoehe/Mould hight: min 225/275 mm Oeff-weg/opening stroke: 575 mm Plate distance max/Max. Open Daylight: 800/850 mm Snail/Screw size: 45 mm Lifting volume/shot volume: 206 cc/194 gram hp Spez. Spray./injection pressure: 1670 bar General General Motor/Motor Power: 18.5 kW Heating/heating power: 10.5 kW Dimensions: 4.4 m x 1.7 m x 2 m Weicht/Weight: 5100 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core Pulling: x1 Euromap
Closing unit Clamping force t: 200 Opening path mm: 650 Holm size mm: 470 x 470 Installation height min/max mm: 300/950 Plate size: 715 x 715 Spraying unit Screw diameter mm: 45 Spray weight gr: 240 Spray volume cm3: 286 Dimensions and weights Dimensions LxWxH m: 5.8 x 2.1 x 2.1 Machine Weight Kg: 7800 Other - 1 core - robot Interface Euromap 12
Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pullers and robot connector, with quality control program. Please see my other ads.
Arburg Injection Moulding Machine Type: 520 C 2000-675 Control: Selogica Built: 1999 Closing unit Clamping force t: 220 Opening path mm: 900 Holm size mm: 520 x 520 Installation height min/max mm: 250 Plate size: 715 x 715 Spraying unit Screw diameter mm: 60 Spray weight gr: 427 Spray volume cm3: 508 Spray pressure bar: 1400 Dimensions and weights Dimensions LxWxH m: 5.6 x 1.7 x 2.2 Machine Weight Kg: 7050 Other - Clamping force increased to 220 KN - resistant plastification unit - 2x core pull - Robotinterface Euromap12
Manufacturer: Arburg Type: 570 C 2200 - 1300 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 2200 kN Tie bar spacing: 570 mm x 570 mm Plate size: 795 mm x 795 mm Tool height: min. 300 mm Opening distance: 650 mm Max distance between plates: 950 mm Screw: 60 mm Stroke volume: 664 ccm / 607 gram PS Injection pressure: 1450 bar General Motor: 55 kW Heating: 23 kW Dimensions: 6 m x 1,7 m x 2,1 m Weight: 8000 kg Screen text: German Additional equipment: Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor
B&A REF: 9006 TON: 500 SHOT WEIGHT: 993 SCREW DIAMETER: 70MM STROKE VOLUME: 70CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 1280 X 1280MM DBTB:920 X 920 MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 950MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1850MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: EUROMAP HEATING CAPACITY: 37KW ROBOT INTERFACE: EUROMAP ACCUMULATED: 2
ARPECO TRACKER SLITTER REWINDER -Year 1995 , Web Width: 13" ( 33 cms.) -Hydraulic Edge Guide, Shear Cut Slitting 28" ( 70 cms. ) max roll Diameter -18” max rewind diameter -Stroboscope- Strobe Light, 3” core shaft diameter -Incremental Length counter -Individual Label Counter -Dual Speed Rewind, Labels In / Labels Out -Web Advance, in production
material-width : max 1.200 mm cores of mother roll 76+152 mm weight of un+rewind-roll 1.000 kg unwinder diameter max. 1.000 mm rewind diameter max 1.000 mm rewind-roll min. width: 150 mm one arm max. 219 mm / two arms up from 220 mm rewind shaft dia. 50 / 70 / 76 mm tension-unwinding : 100 kg tension-rewinding : 20 kg/each arm machine speed : 350 m/min
ASHE 520 mm Turret Rewinder from 2020 Equipped with slitting unit Glueless turret rewinding Tail closing unit Working width: 520 mm Rotary shear slitting Has his own unwinder Stand-alone machine Can run also with printing press Core dispenser Available immediately
ASHE Sapphire Duplex Slitter Rewinder: Type 130 - 60 Baujahr / Year: 2002 Cutting width minimum / minimum slit width: 15 mm Max. material width: 1300 mm Max. unwind diameter: 1000 mm Unwind core diameter: 76 mm & 150 mm Rewind core i.d.: 76 mm Number of lower knives / number slits: approx. 60 pcs. Material / material range: - Transfer tape with open adhesive / open adhesive transfer tape - Papiere / various papers ... - Buchbindingeinen / canvas book binding material - mit Absaugung / with aspiration - mit 2 Entladenwagen / with two unloader carriage Self-dismantling and removal / machine "as it goes and stands"
ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMIN ...
ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...
Diamond core drilling machine -Drill stand -Vacuum pump -Water pump tank -Core drill: Ø 15/20/3x 25/3x 28/32/40 mm
Battenfeld injection moulding machine Type: BA 13000 / 7700 HM control: Unilog 9000 year: 1996 Clamping unit Clamping force t 1300 Opening stroke mm: 1650 Holm dimension mm: 1600 X 1250 min/max height mm: 800 / 1400 Plate size: 2220 X 1880 Injection unit Screw diameter mm: 120 Injection weight gr: 5146 Injection volume cm m³: 5655 Spray pressure bar: 1361 Dimensions and weights Dimensions Lxwxh m: 14 X 3.2 X 2.54 machine weight kg: 82,500/14500 Miscellaneous 2 + 2 core pull EUROMAP 12 INTERFACE
Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: Unilog 4000 B Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 560 mm x 560 mm Disk size/platen size: 800 mm x 800 mm WZ height/mould hight: 200 mm max 520 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 970 mm Auger/screw size: 50 mm Stroke volume/shot volume: 540 CC / 491 gram PS spec. Spritzdr / injection pressure: 1822 bar General / General engine power: 30 kW Heating/heating power: 15.6 kW Dimensions/dimensions: 5.65 m x 1.45 m x 2.10 m Weight/weight: 10400 kg screen text/language: English additional equipment/additional equipment Core puller / core pulling: x 3 Lubrication lubrication / Central
(Schloemann) Beche DGH 40 Ton ( Revamped by Schuler group 2019) Manufacturer: BECHE (Schloemann) Type: DGH 40 YOM: Revamped 2019 Machine Number: 2412-HW Including 12 Ton Wellman manipulator Impact work: 40,000 mkg Total bar lift.:1.250 mm Maximum number of strokes:80 Pro Minute Average score: 6 Pro Minute Air consumption per ten blow Blow in . m in required air at the strongest hit: 6.8 Cold Air Compressor performance in m3/min: 41 Cold Air Compressor performance in m3/min:27 Hot air (160° C) Power requirement of the compressor in hp:260 Cold Air Power requirement of the compressor in hp:180 Cold Air Air tank capacity:30 m3 Steam consumption per hit with the strongest hit:3.5 kg Steam consumption per minute (saturated steam):21 kg Clear width between the guides: 1200 mm Maximum singing sounds: 2700 mm Lowest overall height of the dies without dovetail: 575 mm O ...
BIESSE ROVER K FT machining center Manufacturer: BIESSE Model: ROVER K FT Year of production 2017 Additional information: Electrospindle: 1 pc. Main engine: 9 kW Tool magazine: 14 positions Vertical drills: 10 pcs. Machine table: raster Software: BIESSE B_SOLID Number of revolutions: max. 24,000 rpm Handles: HSK-F63 The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos.
B&A REF: 9008 TON: 800 SHOT WEIGHT: 3687G SCREW DIAMETER: 100MM STROKE VOLUME: 3927CM3 INJECTION PRESSURE: 1470BAR PLATEN SIZES: 1470 X 1470MM DBTB: 1010 X 1010MM MIN MOULD HEIGHT: 380MM MAX MOULD HEIGHT: 975MM MOULD OPENING STROKE: 1025MM MAX DAYLIGHT: 2000MM EJECTOR STROKE: 300MM CONTROLS: KEBA AIR VALVES: 2 CORE PULL: 2 SCREW DRIVE: HYDRAULIC
Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fau ...
For sale: Bragernes aut. coreless rewinder, year 1981, web width 1000 mm, Unwind dia. 1000 mm. Can make rolls from 5 m up to outside dia. 50 mm With web guide and tension control.Available: Now
1 x Bridge 84in x 26in/22in dia two roll mill, manual nip adjustment, Cored rolls with rotary joints fitted, Bronze bush type sleeve bearings, with Hagglunds hydraulic drives fitted to each roll, 160kW motor with pump to each roll for variable roll speed/friction. Drives fitted in 1988 (Marathon type). Complete with controls etc and in good working condition. Fabricated bedplate.
BRAND: BROTHER YEAR: 2011 MODEL: TC-32BN QT APPLICATION TYPE: DRILLING LOCATION: TURKEY MACHINE TYPE: DRILLING MACHINES AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: CNC-B00 MOVEMENT X-AXIS MOVEMENT: 550 MM Y-AXIS MOVEMENT: 400 MM Z-AXIS MOVEMENT: 415 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - COOLANT THROUGH SYSTEM (CTS): YES - SPINDLE MAXIMUM POWER: 10 KW - X AXIS TRAVEL (MM): 550+40 (ATC STROKE) - TABLE SURFACE DISTANCE BETWEEN SPINDLE GAUGE PLANE (MM): 230-645 - MAXIMUM LOADING CAPACITY (KG): 200 (ONE SIDE) - TOOL SELECTION METHOD: RANDOM ACCESS - ROTARY TABLE (4TH AXIS): NO
Control Fanuc ... 31i - B Spindle diameter ... 110mm Axis X ... 2200mm Axis Y ... 1600mm Spindle speed ... 35-3000 rpm IKZ... 20bar Axis W ... 550mm Axis Z ... 1600mm Magazine slots ... 60 BT 50 Table dimensions... 1250x1500mm table load ... 5000kg Axis B ... 0,001° Rapid traverse... 12m/min L x W x H ... 7750x4715x3700mm Machine weight ... 22500kg Operating hours - 500 Head Workpiece probe Renishaw RMP 60 Conveyor Tools The machine is in good condition, possible to test under electricity.
1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.
Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt
Table size 450 x 210 mm Longitudinal travel 300 mm Cross travel 200 mm Vertical travel 370 mm Equipped with: Digital Coolant
Stable drilling machine for core drilling up to borehole diameters of 1250mm; suitable for reinforced concrete; Including hydraulic power unit HAG-12.10; Including drill bit DN 1200 (length 160 cm) with used segments, DN 1000 (length 145 cm) with worn segments and DN 1000 (length 80 cm) without segments; including 1 set of new diamond segments for drill bit DN 1000 for reinforced concrete
Technical data of the used CERUTI AF 80/130 boring machine: - Spindle Ø: 130 mm - Ø boring spindle: 80 mm - Table dimensions: 920 x 1320 mm - Longitudinal travel: 1800 mm - Transversal travel: 1250 mm
Product number: 2715B Type: SC400 Belt width: 400 mm Scoring: 2 mm wide, +/- 7 mm long Power: 3 x 400V, 50Hz, 0.2kW Dimensions: 1100 x 550 x 1200 mm Scorer for burgers
Workbench drilling machine height capacity CINCINNATI type P310 Rotation from 400 to 20000 RPM Maxi height base/Chuck nose 200 mm Throat depth 120 mm Maxi drilling capacity: 5 mm Voltage 380 V Base dimensions: 200 x 530 mm Width 350 mm Depth 600 mm Total height 600 mm Weight approx. 50 kg MACHINE IN OUR STOCK IN FRANCE.
CMC Cevenini E450 Automatic Roll Slitting machine Automatic Roll Parting Machine Age: 2012 Working width: 1700 mm Max. Roll diameter: 430 mm Core diameter: 25 – 76 mm Roll weight max.: 80 kg Cutting width: From 2 mm Cutting System: Single rotating circular knife PLC Siemens Control Panel with Touch screen Machine comes with various circular knives in different diameter Machine comes with various shafts from 25 – 76 mm core diameter Machine is cutting Adhesive foil rolls, Adhesive tape rolls, paper rolls, foam rolls or other rolls. It uses a rotating circular knife for cutting a roll in several pieces with smaller widths