303 results
similar results found in category peripheral equipment (e.g. heating, conveying, drying)
item-No.: 159294320
ES
BRAND: SACEM
YEAR: 1995
MODEL: Racem-603
PRODUCTION HOURS:
APPLICATION TYPE: BORING
LOCATION: SPAIN
MACHINE TYPE: BORING MACHINE
AVAILABILITY: IMMEDIATELY
Technical Information
CONTROL UNIT
BRAND: NUMMODEL: 1060
MAIN DRIVE
SPINDLE SPEED RANGE: 4-2500 1/MINNUMBER OF AXIS: 4
MOVEMENT
X-AXIS MOVEMENT: 5000 MMY-AXIS MOVEMENT: 2500 MMZ-AXIS MOVEMENT: 2000
MM
WORKPIECE
WORKPIECE WEIGHT: 35000 KG
MEDIA
MAIN ELECTRONIC CONNECTION: 220-380V/ 50 HZ
ADDITIONAL EQUIPMENT
- ...
item-No.: 159287050
BRAND: SACEM
YEAR: 1996
MODEL: MSMG - XC/110-C/N
PRODUCTION HOURS
APPLICATION TYPE: BORING
LOCATION: SPAIN
MACHINE TYPE: BORING MACHINE
AVAILABILITY: IMMEDIATELY
CONTROL UNIT
BRAND: NUMMODEL: 1060
MAIN DRIVE
NUMBER OF AXIS: 4
MOVEMENT
X-AXIS MOVEMENT: 2000 MM
Y-AXIS MOVEMENT: 1500 MM
Z-AXIS MOVEMENT: 700 MM
WORKPIECE
WORKPIECE WEIGHT: 10000 KG
ADDITIONAL EQUIPMENT
- SPLITTER
- SQUARE
Additional Information
MACHINE BENEFITS
TECHNICAL MACHINE BENEFITS:
- SPINDLE DIAMETER 110 MM
item-No.: 159274736
US
45MW 50Hz MITSUBISHI 8 x 18KU30A
This power plant had operated 8 diesel engine generators for
electricity production, using HFO / DO as fuel.
Engine model is MITSUBISHI 18KU30A. Generator model is NISHISIBA
NTAKL-SE and its output is 5,600 kWe at 50 Hz. They were produced in
1998 and had been successfully operated until 2018. The running hours
of gensets are about 21,000 hours.
The power plant stopped running o ...
item-No.: 159272799
HU
Moretto D-202 dehumidifying dryer in good condition for sale.
Heating capacity 5 kW, cooling 1690 kcal/h, hopper 150L, air flow rate
70 m3/h
item-No.: 159272797
REF-1874 12-VALVE FILLING MACHINE FOR CORROSIVE SUBSTANCES (BLEACH)
WITH DETERGENT DOSING MACHINE AND CAPPING MACHINE
Filling machine for corrosive substances (bleach) with 12 filling
valves.
Dosing machine for detergent (6 valves).
Cap feeding system and press-on capping machine.
For 0.5, 1, 2 and 5-litre bottles
Overall dimensions: length 5,000mm, width 2,000mm, height 3,000mm.
item-No.: 159271987
BRAND: GEMINIS
YEAR: 2010
MODEL: GHT 11 G4 2200x8000
PRODUCTION HOURS:
APPLICATION TYPE: TURNING
LOCATION: SPAIN
MACHINE TYPE: LATHE
AVAILABILITY: IMMEDIATELY
CONTROL UNIT
BRAND: FAGOR
MODEL: 8070
MAIN DRIVE
NUMBER OF SPINDLES: 1
NUMBER OF AXIS: 2
MOVEMENT
Z-AXIS MOVEMENT: 8000 MM
WORKPIECE
WORKPIECE DRM: 2200 MM
WORKPIECE WEIGHT: 25000 KG
TOOLS
SLOTS IN STORAGE: 8
ADDITIONAL EQUIPMENT
- STEADY REST
- CHIP EXTRACTOR
- ELECTRONIC HANDWHEEL
- MACHINE LEVELING SUP ...
item-No.: 159187394
BRAND: OKUMA
YEAR: 1999
MODEL: MX55
PRODUCTION HOURS: 40792
APPLICATION TYPE: MILLING
LOCATION: SPAINMACHINE TYPE: MACHINING CENTERS (VERTICAL)AVAILABILITY:
IMMEDIATELYCONTROL UNIT BRAND: OKUMAGINDUMAC ID:
ES-MIL-OKU-1999-00001
Technical Information
GENERAL DATA
MEASUREMENTS WIDTH: 1100 MMMEASUREMENTS DEPTH: 550 MMMEASUREMENTS
HEIGHT: 500 MM
CONTROL UNIT
BRAND: OKUMAMODEL: OSP-U100MCNC MAIN LANGUAGE: SPANISH
MAIN DRIVE
NUMBER OF SPINDLES: 1SPINDLE SPEED RANGE: 25000 1/MINNUMBER OF AXIS:
...
item-No.: 159187376
BRAND: AMADA
YEAR: 2006
MODEL: Flexa 100-30 Schiavi
PRODUCTION HOURS:
APPLICATION TYPE: BENDING
LOCATION: SPAIN
MACHINE TYPE: BENDING MACHINES
AVAILABILITY: IMMEDIATELY
CONTROL UNIT BRAND: SCHIAVI
GINDUMAC ID: ES-BEN-AMA-2006-00001
Technical Information
GENERAL DATA
MACHINE WEIGHT: 6500 KG
CONTROL UNIT
BRAND: SCHIAVI
MODEL: CNC 2K
MAIN DRIVE
PRESSING FORCE: 980 KN
BENDING LENGTH: 3000 MM
NUMBER OF AXIS: 8
MEDIA
MAIN ELECTRONIC CONNECTION: 400/ 50 HZ
...
item-No.: 159138016
CH item-No.: 159079912
Hermle C650 5-Axis VMC
Control:Heidenhein TNC 640i
Condition: Excellent
Under Power: Yes
Specifications:
X-Axis: 1050 mm
Y-Axis: 900 mm
Z-Axis: 600 mm
Rapid Linear Traverse Rate (X / Y / Z): 35 / 35 / 35 m/min
Max. Workpiece Diameter: 900 mm
Max. Workpiece Height: 600 mm
Spindle Speed: 18,000 RPM
Spindle Motor: 42 kW
Spindle Taper: HSK-63
Tool Magazine: 42 ATC
Equipped With:
Heidenhain TNC 640 Control
Dynamc Efficiency (ACC, AFC, Trochoidal Milling)
Dynamic Precision (CTC, AVD, LAC)
Dimensions ...
item-No.: 159029232
PL
JOTES SPD 30B surface grinding machine of Polish production is a
manufacturing machine with horizontal spindle axis that performs
grinding on the periphery of the grinding wheel. The workpiece of
maximum length 1000 mm and width 300 mm is mounted on a rectangular
electromagnetic table or directly on the grinding machine table.
The work table moves on the base guideways and the change of its
direction of movement can be performed automatically by bumpers or
manually by adjusting a suitable lever. The hydraulic dr ...
item-No.: 159022420
BRAND: EUROMAC
YEAR: 2015
MODEL: STX Plus 1250/30-2500 Flex 12 Hybrid
PRODUCTION HOURS:
APPLICATION TYPE: PUNCHING
LOCATION: SPAIN
MACHINE TYPE: PUNCHING MACHINE
AVAILABILITY: IMMEDIATELY
CONTROL UNIT BRAND: EUROMAC
GINDUMAC ID: ES-PUN-EUR-2015-00001
Technical Information
CONTROL UNIT
BRAND: EUROMAC
ADDITIONAL EQUIPMENT
- FLEX: SERVOMOTOR-CONTROLLED HYDRAULIC SYSTEM
- PROGRAMMABLE ADJUSTMENT OF PUNCH STROKE, SPEED, ACCELERATION AND
DWELL TIME
Additional Information
M ...
item-No.: 158904574
Table
Table size 10.000 x 1.100 mm
Max weight allowed on table 30.000 kg.
Travels
Longitudinal Traverse (X Axis) 8.500 mm
Transversal Traverse (Y Axis) 1.200 mm
Vertical Traverse (Z Axis) 2.000 mm
Rapid Traverse 25.000 mm/min
Max. Working Feed 10.000 mm/min
Headstock
Automatic Head 2.5º / 2.5º INCLUDED
Taper ISO 50 DIN 69871
Turning Speeds 20 – 4.000 r.p.m.
Speed Ranges 2
Main Motor Power 30 kW
Additional equipment
Automatic tool changer (ATC) INCLUIDED
ATC type Chain Horizontal / Vertical
...
item-No.: 158904573
Manufacturer NICOLÁS CORREA
Model PRISMA-25
Year 2006
CNC HEIDENHAIN i TNC 530
Table Surface 2.800 x 900 mm.
Carrying Load Table 4.000 kg.
Number of T Slots 5
T Slots Dimensions 22 mm.
Longitudinal Traverse (X Axis) 2.500 mm.
Transversal Traverse (Y Axis) 1.000 mm.
Vertical Traverse (Z Axis) 1.000 mm.
Working Feeds (X/Y/Z) 5-10.000 mm/min
Rapid Feed X/Y 20.000 mm/min
Rapid Feed Z 15.000 mm/min
Head Type Universal Manual
Taper ISO 50
Turning Speeds 3000 rpm
Head Power 22 kW
GSS 4TH Axis INCLUDED
...
item-No.: 158904569
Manufacturer IBARMIA
Model ZVH45H L4000
Year 2003
CNC FANUC 18i
Table Surface 4.600 x 850 mm
Rotary table INCLUIDO
Rotary table size Ø 850 mm.
Longitudinal Traverse (X Axis) 4.000 mm.
Cross Traverse (Y Axis 800 mm
Vertical Traverse (Z Axis) 860 mm.
Rotary table turning (C Axis) 360º
C Axis positioning 0.001º
Titling head range (B Axis) ±105º
B Axis positioning 0.001º
Rapid Traverse (X,Y,Z) 30.000 mm/min
Taper ISO-40
Turning Speeds 10.000 rpm
Nº Ranges 2
Engine Power 18.5 kW
Torque 126 Nm
...
item-No.: 158896459
BILDU LAN
Transportador Root Modelo OF. 810604.
Año Fabricación.: 2004.
Potencia.: 3.8Kw.
Masa.: 2.5tm.
Medidas.: 5.50x3x0.62 (LxAxH)
item-No.: 158756946
Used Laska Z-arm model ME-400 ZN-1 mixer is best suited to intensive
mixing of thick and heavy products, like meat, dough and butter. The
bowl includes two intermeshing Z-shaped mixing arms.
Effective mixing action with high peripheral wing speed
Good volume utilization with short mixing and discharge times
Excellent distribution and absorption of liquids, spices and
additives
Easy programmable mixing for excellent consistency of a wide range of
products
Stainless steel, reliable and easy-to-clean constructi ...
item-No.: 158705547
DE
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used H ...
item-No.: 158683180
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used H ...
item-No.: 158683161
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used u ...
item-No.: 158683146
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used H ...
item-No.: 158683109
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used f ...
item-No.: 158676338
VECOPLAN VIBRATION CONVEYOR VR85/18
Trough width: 850 mm
Trough height: 220 mm
Total length: 6050 mm
motor: 2,2 kW
INCLUDES:
- machine revised in our workshop
- operation mannual
- Posibility to mount screening zone and/or metal free-zone for
mounting of metal detector; aditional cost
- Posibility to paint the machine in your desired colour
- Dimmensional drawing of the equipment available in pdf and/or Acad
format
item-No.: 158644017
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used u ...
item-No.: 158642585
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Refurb ...
item-No.: 158635318
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used H ...
item-No.: 158635305
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used H ...
item-No.: 158635283
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used H ...
item-No.: 158621597
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used H ...
item-No.: 158621564
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used H ...
item-No.: 158621430
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used H ...
item-No.: 158621406
A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised
and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt
to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE
machinery
Used u ...
item-No.: 158576349
CNC controller: HEIDENHAIN iTNC 530
Axes
X-axis travel mm: 3.600 (2 x 1.421 with Intermediate wall)
Y-axis travel mm: 1.100
Z-axis travel mm: 900
Feed rates m/min: 20
Rapid traverse m/min: 40
Worktable
Table dimensions mm: 4.200 x 1.100
Max. workpiece weight kg: 5.000
Spindle
Spindle speed rpm: 10.000
Spindle drive power kW: 32/22
Spindle torque Nm: 298/205
Cooling
Tank capacity: 980 l
High-pressure bar: 40
Tool system
Tool holder: HSK-A100
Tool magazine slots: 120
M ...
item-No.: 158568361
IT
galvanized metal structure ;
storage mc 100;
filtration mc /h 45.000 .
n° 01 aspirator kW 45
n° 01 electric control panel
item-No.: 158568356
FILTRATION SUBSTATION-USED-CHECK-
Galvanized structure
Construction Atex II 3D
Air flow mc/h 45.000
Dimension : 5500 x 2450 x h 7000 mm approx
quite room
Filter : n° 396 dimension l 2500 x d. 125
Type Filter : antistatic gr 500 used for 3 moth
Total filtering surface : mq 400
Cleaning of Filter :in counter air wash, with adjustment control
panel
Explosion panels : n° 06 ATEX
Discarge of filtered material : motorised screw conveyor (coclea),
motorised stellar valve .
Electric fan kW 45
Ele ...
item-No.: 158526040
T-Type moving column milling machine with turning option
Manufacturer LAGUN
Model GTM-2
Year of Manufacture 2014
CNC HEIDENHAIN TNC 640
Integrated Turning Table
Table Surface Ø 1800 mm
Radial T slot size 22
Max Speed of table 320 r.p.m.
Speed ranges 2
Max. Weight Allowed on Table 5.000 kg.
Power 28 kW
Toque 8.400 Nm.
Min Indexing Table 0.001º
Travels
Longitudinal Travel (X Axis) 2.000 mm
Transversal Travel (Y Axis) 1.200 mm
Vertical Travel (Z Axis) 1.500 mm
Column Moviment( V Axis) 1.000 mm. ...
item-No.: 158499650
4 worki na odpady
wydajno 6500 m3/h
uszczelniona konstrukcja
system otrz?sania worków
moc silnika 5,5 kW
zasilanie 380V
item-No.: 158481794
moc silnika 11kW
wydajno?c ok 1435 l/min
ci?nienie robocze 10 bar
wbudowany osuszacz
obudowa d?wi?koszczelna
waga 220kg
rok produkcji 2009
item-No.: 158481690
Glue-on thickness max. 15 mm, equipment:
jointing/gluing/trimming/milling-flush/milling-radius, profile scraper
RS 2mm, corner copier, surface scraper, buffing, function-tested
machine
item-No.: 158421789
CL
Manufacturer: Fata Production Machinery (1995)
Main Equipment:
2 pay off reels
Entry Lap Welder (Taylor Winfield)
Vertical Accumulator
High Pressure Spray Cleaning Section
Electrolyte Cleaning Section
Brushing Cleaning Section
Rinse Section
Vertical Annealing Furnace (Selas)
Flying Exit Shear
2 Tension Reels
Line Capacity: 60.000 MT/year
Maximum Process Section Speed: 113m/min
Maximum Entry Section Speed: 136 m/min
Maximum Strip Thickness: 0.28 mm
Minimum Strip Thickness: 0.17 mm
Maxi ...
item-No.: 158421787
Manufacturer: Bliss
Revamp: Clecim (1994)
Configuration: 19”x53”x48” 1 Stand 4Hi TMM
Main Equipments:
1 Uncoiler
Entry Bridle (Two Rolls 20”)
Anti- crimping roll
Work Roll Bending
Exit Shear
Exit Bridle (Two Rolls 20”)
Electrostatic oiler (both sides)
Tension reel
HGC
Strip width range: 600 – 1060 mm
Strip thickness range: 0.17 – 1.9 mm
Maximum speed: 610 m/min
Coil weight: Max 18.8 mt
Inner ...
item-No.: 158421768
Slab Caster Main Data
• Manufacturer: Concast-Sumitomo
• Number of Strands: 1
• Machine Radius: 8m
• Number of Segments: 7
• Mould Size: 760 -1060mm (not adjustable when casting)
• Slab Thickness: 160mm
• Oscillator: Mechanical
• Straightening: Multipoint
• Cooling: Single Zone
• Casting Speed: 1.7 m/min
• Capacity: 650 kt/y
• Tundish Weighing: Yes
• Tundish Equipment: Stopper Rod, Submerged Entry Nozzle
• Dummy Bar: Bottom Entry, Linkage Design
...
item-No.: 158399114
NL
This Carver Press has been in the machine storage at Plastima Used
Machinery since 2021. The machine is from April 2013 and is in good
condition.
– Brand : Carver Press
– Model : 3891CEB
– Year of construction: 04/2013
– Working hours : NB
item-No.: 158399111
This Collin inspection system has been in the machine storage at
Plastima Used Machinery since 2021. The machine is from 2007 and has a
normal number of working hours for its age.
– Brand : Collin Pilot & Lab Solutions
– Fashion model : Coficos AIS
– Construction year : 2007
– Working hours : NB
item-No.: 158399102
This roller from Agila has been in the machine storage at Plastima
Used Machinery since 2022. The machine is from April 1996 and is in
very good condition.
– Brand : Agila Roll Mill
– Model : LW60/120
– Year of manufacture : 1996
– Working hours : NB
item-No.: 158385618
SK
5x Morreto OTX dryers
Model: HG1Y5OX
Year of production: 2017
1x Morreto Dehumidifier SX22
Year of production: 2016
It is dismantled
item-No.: 158378538
Machine on Sale: NOVA JET CLEANING & IRON SCREENS KIT
On sale Nova Jet Cleaning & Iron screen kit installed in 2018. Machine
is in perfect running conditions and well maintened as worked very few
hours (less than 1000h). The complete lot include everything necessary
to run the machine along with all perifericals and large set of spare
parts for the machine.
Machine is fully operational and can be visited for a test and
inspection.
Lot composition:
1.- Nova Jet Cleaning System for stripping rotary nickel ...
item-No.: 158330112
CNC controller: MSX-501III
Axes
X-axis travel mm: 560
Y-axis travel mm: 560
Z-axis travel mm: 620
B-axis degrees: 360º (1º)
Feed rates m/min: 50
Rapid traverse m/min: 50
Worktable
Number of pallets: 2
Table dimensions mm: 400x400
Maximum workpiece size (D x H) mm: ø630x900
Max. workpiece weight kg: 400
Spindle
Spindle speed rpm: 14.000
Spindle drive power kW: 18/11
Tool system
Tool holder: BT-40
Tool magazine slots: 40
Max. Tool Diameter
With free neighboring places mm: 1 ...
item-No.: 158275265
item-No.: 158215732
BR
This specification describes Wärtsilä scope of supply for 6x18V50DF
Trifuel Engine Generator Sets for FPSO. The specified equipment are
intended to be installed on generating set module, consisting of six
Wärtsilä 18V50DF engines with generators and essential auxiliary
systems in one module. The module and module auxiliaries are not part
of the specification scope, but dimensions is given as guidance.
Main dimensions of the module: the information of module main
Length: 25,20 m
Beam: 16,40 m
Beam ...
