used ELEKTRA BECKUM for sale

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and error ...

Posten Circular saw motors: 4 electric motors ELEKTRA BECKUM for circular saws 2.8 / 2.2 KW, 3 x 400 volts, 2800 rpm, IP44, cos phi 0.88.

Machine type: Table milling machine Manufacturer: ELEKTRA BECKUM Model: TF 100 M 2.8 DN Built: 1998 Condition: ready for use Offer type: used machine Technical data: Table: 520 X 420 mm Speeds: 4000/6000/7500 rpm. Drive: 1.8 KW Comment: with an additional horizontal sawing unit (1.5 kW) for Two-sided machining with roller conveyor and lateral material guidance, everything can be easily dismantled Weight: 150 kg

Vertical Band Saw Elektra-Beckum BAS 500 DNB Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.

feed pressure: 10 bar liter capacity: 1400 m³ / min dimensions: 700 x 550 x 1100 mm total power requirement: 11 kW weight of the machine ca.: 275 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dust suction hood: x mm Motor output: x kW Air consumption: 2000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: max. 250mm, motor speed: 2800rpm, saw shaft speed: 3800rpm, saw blade bore: 20mm. Max. Cutting height 90°/45°: 82/55mm, table size: 710 x 900mm, angle adjustment: 0° to 45°.

incomplete or defective.

Description: Serial number: 83930458 N = 1400 1/min P2 1.5 kW S1 100% Saw blade width: 6 - 25 mm Max. cutting height: 270 mm Saw blade length: L = 3380 mm Saw table height: 945 mm Projection: 270 mm Saw table swivel angle: 0 - 45° Saw table size: 720 x 535 mm Belt speeds: 410 - 1025 m/min stepless With operating instructions With replacement saw blade weight approx.: 160 kg, Approx. Onsite Dimension. (l x w x h): 840 x 840 x 1,840 mm

Description: Table dimensions: 340 x 330 mm Max. clearance height: 100 mm With vice and stop weight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 580 x 530 x 820 mm

Description: - Serial number: 10.002PK - Table size: 710 x 900 mm - Saw blade diameter: 250 mm max - Saw blade bore: 20 mm - Motor speed: 2800 rpm - Saw shaft speed: 3800 rpm - Cutting height 90°/45°: 82/55 mm - Motor power: 3,1 kW weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 950 mm

Description: Sanding belt width approx. 40 mm Approx. Onsite Dimension. (l x w x h): 600 x 250 x 550 mm, weight approx.: 20 kg

Description: Double bench grinder Approx. Onsite Dimension. (l x w x h): 400 x 400 x 1,200 mm, weight approx.: 50 kg

Piston compressor, Compressor -Compressor: without function, is sold as a spare parts carrier -Handover in the current condition as seen -Flow rate: 340 l/min -Max. Pressure: 10 bars -Motor power: 4 kW -Tank capacity: 150 l -Dimensions: 1400/500/H900 mm -Weight: 180kg

Double grinding block make ELEKTRA BECKUM type SL 200Year of construction 1989Grinding wheel size: 200 x 40 mmSpeed: 2830 rpm.Drive power: 1.1 kWPower connection: 380 V / 50 HzWith- Knife sharpener length 800 mm- Knife sharpening device adjustable in anglevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Lathe machine make ELEKTRA BECKUM type HDM 1000Machine -No: 1000-85 built in 1985Technical specifications:Distance between centers: 1000 mmCenter height: 160 mmlargest turning diameter: 320 mmSpindle thread: M 20 x 1.54 spindle speeds: 700 - 2200 rpm.Quill taper: MK 3Quill stroke: 50 mmPower connection: 0.55 kW / 220 V.External dimensions approx .: 1300 x 700 x 1200 mmwith- Three-jaw lathe chuck diameter 100 mm- Emergency stop switch- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools