Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20
Flash Pasteurizer GEA MICRO 50hl/h for Beer This flash pasteurizer was manufactured in 2018 by GEA Denmark for beer pasteurization and it will soon be dismantled professionally. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a service tank for water during CIP process, heat exchanger, holding / pasteurization tube, control cabinet ...
Mixer Manufacturer: GEA Type: Pharma Connect Mobile Control Unit Year of construction 2019 GMP/Pharma New Original Packaging including PMA 60 + PMA 30 including GPS Process Manager Documents available
Granulation-Mixing-Drying Manufacturer: GEA Type: Pharma ConnectTM and Air ConnectTM Year of construction 2019 GMP
GEA Tuchenhagen lye tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200
GEA Tuchenhagen acid tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200
GEA Complete UHT Plant For Sale Item #: Usm-154 Category UHT Plants GEA UHT Plant For Sale
Used piston homogenizer. Producer: Gea Niro Soavi Model: Ariete NS3075 Year. 2011 Maximum pressure: 20MPa Capacity: 10000l/h A complete control cabinet with inverters is included with the device.
Used plate pasteurizer made by Gea, type 161. New 1986. Max. pressure 4 Bar, max. working temperature 100 ° C, volume 209 L, extension 881-938 mm. Capacity 7550 kg / h.
GEA plate sterilizer 4 sections max working pressure: 16 bar max working temperature: 140 St C
Product number: 2580 Type: PlatForm Serial number: E010990205253 Year of construction: 2019 Platform height: 600 mm Steps: 2 pieces Dimensions: 2100 x 750 x 1700 mm
Product number: 1920 Type: PlatForm Serial number: E10990205205 Platform height: 950 mm Steps: 5 pieces Dimensions: 2400 x 750 x 2050 mm Never used, in new condition Used for product inspection, cleaning and safety.
Used Gea centrifuge model ASE-20. Year of manufacturing 2019. Allowable rated rotational speed of the drum min-1 1200 (FU:60HZ) Allowable feed material density kg/dm3 1 max. Allowable heavy liquid density kg/dm3 1 max. Allowable solid phase density kg/dm3 1.4 max. Allowable throughput m3/h 400/1.5 min./max Allowable feed temperature ºC /95 min./max Allowable housing pressure range bar (g) -/0.04 min./max Drum filling volume l 3.6 approx. Allowable vibration speed mm/s RMS 7 max. Measuring point on the stand Ambient temperature °C 10/45 min./max plate clamping pressure bar (g) 82-112 CIP possible - yes CIP flow rate l/h -/1800 min./max Sound power level dB (A) 80 DIN EN ISO 3746 Sound power level mW 2.94 DIN EN ISO 3746 Lubricating oil quantity l 2.25 approx. Construction type IMV1 Power kW 11 (FU:7.5KW) Voltage V 400 Frequency Hz 50 Type of protection IP55 Inv ...
– Thermoforming and Sealing Machine – GEA POWERPACK NT 76750101 – Year 2014 The GEA PowerPak thermoforming machine is specially adapted to different applications (vacuum, MAP, shrink, topform, skin, zipper, medical and technical packaging). Conversion to other packaging is easy and format changeover is quick and takes place in a few simple steps. To adapt this equipment to your needs, the Powerpak Thermoformer-Sealer can easily be completed with various integrated upstream and downstream components. A powerful conveyor chain securely grips the lower web of the feed drum. A precision servo motor indexes the web throughout the machine process. The length of the index is programmable on the HMI and stored as a recipe parameter. The loading area is accessible from both sides for several operators. Powerful GEA membrane sealing system for reliable seals and constant pe ...
used thermoforming machine TYPE Powerpak NT 420 year 2011 for sale Machine was taken out of production - ran to the last. Foil width 420 VZ 590 mm Price on request
GEA UM600 dumpling roller All stainless steel Bottler for meatballs Laize 600 mm To form 6 to ± 80g dumplings Suitable for online with a shaper (VM 400) Adjustable speed Mobile Dimensions (L x l x h): ± 1,300 x 700 x 1,500 mm
- Type: 400 MLF - Hopper: 320 L - Maximum weight for a form: 1.1 Kg. - Maximum frame rate: 65 cp/min. - Mat speed from 1.5 to 15 m/min. - Output height from 1015 to 1143 mm. - Machine weight: 1800 Kg. - Power: 23 kW. - Air supply 6 bar, 300 L/min. - Water supply: 4 bars. - Noise nuisance 84.5 db. - Dimensions (L x W x H): 2752 x 1652 x 2636 mm. - Programming by PLC.
FOR SALE .. WESTFALIA GEA BILGE MASTER 1500 COMPLATE SYSTEM YOB 2007 AT TURKEY ... HAVE A GDY SIR; WE VE COMPLETE SYSTEM WESTFALIA GEA BILGE MASTER 1500 AT STOCK. PLS FIND DETAILS OF SYSTEM. — BILGE MASTER 1500 YOB 2007 SER NO 9017-909 IMO CERTIFICATE 330 238 / MEPC 107 (49) — BILGE WATER CENTRIFUGE GEA WSD8 01 037 YOB 2007 S No 9039 654 —OIL MONITOR OMD 2005 —COMPLETE WESTFALIA CONTROL PANEL --GEA FILTER AF 300 YOB 2006 -- FEED PUMP IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
Gea Fan Cooler IF-PD202T6H-091H06D with Low Pressure Sprinkler GEA, 260 kW MANUFACTURER: GEA Kelvion Power: 260 kW Medium: Ethylene glycol 35% Fluid Flow: 31.1m^3/h Airflow: 24.2m^3/s Number of fans: 4 Power of a fan 1.9 kW Fan speed 897 rpm Pressure drop 0.6 bar Liquid capacity: 208 L Temp. Input Liquid: 42C, Output: 34C. Temp. Environment 35 C Connections DN 65 PN 16 Water consumption: 303 l/h More items - new and used - can be found in our shop! International shipping costs on request!
Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.
GEA GLAC 0152 AC1.SL Brand:GEA Type:GLAC 0152 AC1.SL Stock number:M21-4513 Cooling capacity:34 kW Number of fans:4 Refrigerant:R407C Refrigerant Content:6 + 6 kg Voltage:400 Volts Power consumption:15 kW Dimensions:2000 x 1150 x 1990 mm Weight:850 kg Year:2006 Number in stock:1 piece(s) Price:On request Description: Nice air-cooled Gea chiller with 2 Copeland scroll compressors distributed over 2 circuits. This chiller is equipped with speed-controlled fans, a CVM2 controller and a hydronic module (water pump, expansion vessel and 250 liter buffer tank). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration
GEA PowerGrind Grinder 280 Robust industrial grinder Suitable for coarse and fine grinding of fresh and frozen meat. Applications include ground meat for formed products, sausages, minced meat, pet food and ground frozen vegetables.
GEA CFS FlowCook HLT6000/600 Electrically heated. Hot air and steam. Belt width: 600 mm; Cooking length: 6000 mm Has previously been used for cooking burgers and nuggets in one factory and then on rental to a customer who was roasting trays of nuts.
Complete UF system by GEA For concentration of products . Previously used for Yoghurt . All details are in the images attached . Contact us for more information and would you like to inspect.
GEA Aeromatic-Fielder MP1 Fluid Bed Granulator, with two bowls suitable for batch sizes from 1 to 5kg (0.5kg/l), and 1.1 to 8kg, with drying, top spray granulation, and precision coating of pellets/mini tablets. WIP system. Class D containment, 10 bar pressure, ATEX, PLC controller on front panel, 3 stainless steel filter cartridges, solvent emission control, spray systems, full inlet air handling and preparation system. New in 2005 and unused.
Operating and consumption data: Product: Apple juice Water evaporation 31,550 kg/h Inlet: Quantity 36,000 kg/h Concentration approx.8.9 °Brix Temperature 10-20 °C Pre-concentrate for embellishment: Quantity approx.16,000 kg/h Concentration approx.20 °Brix Temperature approx. 50 °C Expiration: Quantity 4,450 kg/h Concentration 70-72 °Brix Temperature 55 °C after cooling 10-15 °C Aroma: Quantity (!:150)ca 240 l/h Temperature approx. 4 °C Steam consumption (5.5 bar ) for preheating and evaporation approx. 7,000 kg/h Cooling water consumption (26 °C) for condensation and cooling approx.250 m3/h Ice water consumption (1°C) for aroma recovery approx. 4-5 m3/h Operating water (15 °C) for vacuum pumps approx. 3 m3/h Electrical energy approx.80 kW
Product number: 1293 Type: PPI400 Serial number: 457 Year of construction: 2013 Belt width: 400 mm Belt length: 1200 mm Paper dimensions: 140 x 140 mm In combination with Multiformer400 Only been used as a demo model
Product number: 2807J Type: DUAL-PACK 12 Serial number: 152656 P12 Year of construction: 2015 Capacity: 500 kg/24h Refrigerant: R404a Compressor: Copeland Emerson ZB15KCE-PFJ-551 Generator: Geneglace F15 Power: 230VAC, 1Ph, 50Hz Dimensions: 800 x 700 x 700 mm
Product number: 2643B Type: MultiFormer400 Serial number: 2489 Year of construction: 2013 Belt width: 400 mm Capacity: max 55 strokes/min. Hopper: 270 litres Power: 3 x 400V, 50Hz, 9kW Dimensions: 3350 x 1100 x 2650 mm Weight: 1200 kg WIth bridgebreaker Including trolley for forming plates and parts
Product number: 2623B Type: ScorerStation400 Serial number: 152 Year of construction: 2013 Belt width: 400 mm Power: 3 x 400V, 50Hz, 0.2kW Dimensions: 1500 x 600 x 1200 mm Weight: 135 kg
GEA Fuellpack vacuum water degassing system / degassing system. Residual oxygen
Coating machine ensuring perfect and uniform coating of products. A conveyor belt transports the product, which is submerged by a 4-cascade curtain to ensure full coverage of the product. The bottom of the product is covered during passage through an immersion device. The speed of the conveyor belt can be adjusted by the frequency inverter. The correct amount of batter can be adjusted with a valve on the feed. A specially designed hygienic fan blows the excess beater over the top of the product while the excess dough at the bottom is removed by an additional scraper or bottom vent. The blowing speed is controlled by frequency inverter and can be adjusted according to the application. - Production of high-quality products and extended production runs - 4-layer curtain for full coverage - Adjustable treadmill speed via variable speed drive - The amount of batter can be adjusted wi ...
The OptiAir extracts dust from the GEA OptiFlour, creating a vacuum inside the machine. The OptiAir has three objectives: - Prevent dust by creating a depression - Separate the flour from the air: - Blow in clean air. No blockage of blow pipes. - Return of clean air to the work area - Remove excess flour from products Technical specifications: - Manufacturer: GEA - CFS USA - Type: OPA - Year: 2006 - Power: 4 kW - Amperage: 8 A - Supply voltage: 460 V - 3 Ph - Frequency: 60 Hz - Weight: 450 kg - Dimensions (L x W x H): 1360 x 1000 x 1820 mm
Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Good
Plate heat exchangers GEA NT150L B-10, 1491 kg, 356 l press content, year 2009, very good condition, max. 13 bar,.
GEA type 200023512 Intercooler Ladeluftkühler MTU Einwandfreier Zustand perfect condition from an MTU4000 engine that has been running for 25,000 hours von einem MTU4000-Motor, der seit 25000h in Betrieb ist
Supply/exhaust air volume flow: 6500m³/h, total supply/exhaust air pressure: 992/881Pa, heating capacity: 48kW, cooling capacity: 22.6kW, connected load: 8.1kVA, with Hygromatik FLE80-T steam humidifier, pipework, control cabinet, AERMEC WLR 101° water-cooled chiller, condenser, frequency converter, other elements and documentation, on-site inspection is possible.
Overview This machine was built in 2018 by GEA Denmark. It is part of a whole brewery, is still in production and will be professionally dismantled soon. Technical Details Capacity: 10-50 hl/ h Temperature: Variable from 65°C to 75°C Holding time 30 seconds Dimensions (LxWxH): 2,200 mm x 900 mm x 1,750 mm Connections: DN 25-40 Steam consumption: 1.5 kg/h/hl Cooling consumption (glycol): 0.2 m³/h/hl Connected output: 5 kW
Gea Procomac Used Complete Bottling Line These are machines that are part of a bottling line having the following characteristics Bottling line speed 7 000 8 000 bt h of 75 cl sparkling wine and 10 000 11 000 bt h of 75 cl still wine Bottling line designed for the bottling of the following formats 20cl 37 5cl 75cl 150cl Below is the year of manufacture for each piece of equipment with the relative sale price 1 Bortolin Kemo depalletiser year of commissioning 1993 Filling 2 Gea Procomac filling monoblock year of commissioning 2000 Including Gea Procomac rinser 54 taps Ozosteril Gea Procomac for the production of ozonated water to be used in rinsers year of commissioning 1993 Gea Procomac isobaric filler 56 taps Cork capper Arol 8 heads set of mouthpieces for mushroom cap and set of mouthpieces for flat cap Arol screw capper 8 heads set of cap heads stelvin 30 60 screw 31 5 18 screw 15 18 ...
UHT unit for milk products: milk, cream, condensed milk, milk mix drinks, coffee cream, condensed milk, vegetable products; with tubular heat exchanger (indirect product - water), temperature cycle: 4°C (in) - ± 65°C (output to homogenizer) - ± 90°C - protein stabilizer holding 3min - 139/145°C (3 Holding tubes 2-4-6min) - output to downstream aseptic homogenizer -> off at 26°C (milk) or ± 8°C (cream); the unit is complete with balancing tank, pumps, APV Gaulin high-pressure piston pump (30 kW, 50 bar) for water, sensors, interconnected pipes, valves and control with Danfoss frequency converters. Dimensions approx. 5500x4500x2700mm; Disassembled/ready for transport