Model
(Manufacturer: HAUSER)
Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T
Working distances x/y/z approx. 300 mm / 200 mm / 300 mm Max. drilling diameter approx. 14 mm
DRO- ELESTA x-travel 650 mm y-travel 450 mm z-travel 140 mm w-travel (head) 500 mm feed range 0 - 1500 mm/min table surface area 770 x 630 mm spindle speed 4.500- 80.000 rpm spindle speed with turbine 100.000- 160.000 rpm Perfect condition. Just start up and test run, about 200 hours.
Article code: 14-04-011 Manufacturer: Hauser Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1969 L x W x H: approx. 1500x1200x1800mm Weight: approx. 1800kg Digital display: 2-axis Working area: approx. 400x250mm Direct reading accuracy: approx. 0.001mm Accuracy of carriage adjustment: approx. 0.002mm Grinding diameter: approx. Ø220mm Lifting speed: approx. 0-6 m/min Speed: approx. 50000 rpm Accessories Extensive range of accessories / See pictures Other accessories on request Price and other technical data on request
Code 9602 DESCRIPTION Vertical JIG Grinder Make HAUSER Modell 3 SMO Serial No. 257 Machine No. 1519-2564 Table surface 600 x 320 mm Table movement longitude (X) 400 mm Table movement cross (Y) 250 mm Max. grinding diameter Ø 190 mm Column-Spindle 300 mm Max. height under spindle 500 mm Vertical movement spindle 90 mm Vertical movement grindinghead 500 mm Max. speeds grindingspindle up to 80.000 omw./min Weight 2000 kg Total power 6,6 kW – 380 Volts Accessories Grinding spindles, etc. Condition Machine is in good condition
2-axis digital display Travel X/Y/Z: 400/250/500 mm Optical rotary table D 300 mm + adapter plate D 400 mm Swivel rotary table D 200 mm Lots of accessories
stroke 700 mm Y stroke 500 mm workpiece height 675 mm table surface area 900 x 770 mm daylight column 840 mm turning speed range - grinding spindle 9 - 45.000 rpm total power consumption 6.5 kW machine weight approx. 5.5 t machine dimensions approx. 3.6 x 5 m digital control With accessories - see photos in the application.
Travel X-axis 200 mm Y-axis 200 mm Z-axis 250 mm Clamping table Table clamping surface 400 x 300 mm Head Spindle speed 100 – 3000 rpm Spindle holder MK 0 Quill stroke 70 mm Sony digital display, 2 axes Accessories according to pictures Vice Collets Centering microscope Condition The machine comes from a technical school and is in good condition
Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.
Integrated system with 3 Bitzer compressors 4PES-10Y-40P and switch box TK compound or normal cooling compound system. Price on request.
Cooling cabinet from Hauser, ready to plug - 130 cm wide - with integrated refrigeration unit, refrigerant R404A - with built-in magazine or bearing
Cooling cabinet from Hauser, ready to plug - 260 cm wide - with integrated refrigeration unit, refrigerant R404A
projection area: 510x350 mm table-size: 300x170 mm longitudinal travel: 200 mm cross travel: 50 mm vertical movement: 150 mm amplification -fold: 10/20/50/100 voltage: 220 V dimensions of the machine ca.: 850x110x1800 mm weight of the machine ca.: 310 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amplification -fold: ? diameter: 380 mm workpiece height max.: 200 mm voltage: 230 V weight of the machine ca.: 245 kg dimensions of the machine ca.: 0,80 x 1,20 x 2,00 m - Serial-No.: 1740 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amplification -fold: 100 diameter: 560 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: 350 t dimensions of the machine ca.: 650 x 1000 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mm y-travel: 450 mm workpiece height: 585 mm Control: ADCOS CNC 400 total power requirement: 15 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____________________________________________________________________ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Dista ...
x-travel: 400 mm y-travel: 250 mm workpiece height: 485 mm Control: ELESTA CNC 314 total power requirement: 10 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/mi ...
x-travel: 400 mm y-travel: 250 mm workpiece height: mm Control: CNC 314 ELESTA total power requirement: 15 kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distanc ...
spindle diameter: 0 mm x-travel: 700 mm y-travel: 600 mm table length: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Double Column Design Jig Borer Tablesize: 800 x 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 mm y-travel: 250 mm workpiece height: 500 mm grinding diameter max.: 220 mm table surface area: 600 x 320 mm throat: 310 mm range of angles: 12 grad grinding spindle slide - vertical movement: 110 mm stroke speeds: 0 - 6 m/min. grinding spindle speed: bis 50.000 U/min. peripheral speed: max. 35 m/sec capacity: ca. 7 kVA power capacity: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 3 m Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz, feed motion in the table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
It is a very precise and working machine adjustment range X 400 mm, Y 250 mm, W (grinding head) 250 mm, feed X and Y 0 to 1800 mm/min, W 0 to 3000 mm/min, table 600 x 380 mm, maximum table load 200 kg, grinding spindle speeds with electric motor 9 to 45000 rpm, with air turbines up to 100000 and 160000 rpm, planetary rotation stepless 5 to 300 rpm, stroke speed of grinding spindle sleeve with quick stroke 0,5 to 12000 mm/min, stroke of grinding spindle sleeve 110 mm, diameter of grinding spindle sleeve 100 mm, NEW control: ADCOS CNC 800 (Swiss made) - RETROFIT ! http://www.adcos.ch/site/index.cfm?id_art=96324&actMenuItemID=44488&vs prache=DE read operating hours 64940, spindle hours 7633(July 2023) with dressing spindle system: KAISER C 42 DC, magnetic clamping plate , with fire extinguishing device: Kraft Bauer
adjustment range X 400 mm, Y 250 mm, W (grinding head) 250 mm, feed X and Y 0 to 1800 mm/min, W 0 to 3000 mm/min, table 600 x 380 mm, maximum table load 200 kg, grinding spindle speeds with electric motor 9 to 45000 rpm, with air turbines up to 100000 and 160000 rpm, planetary rotation stepless 5 to 300 rpm, stroke speed of grinding spindle sleeve with quick stroke 0,5 to 12000 mm/min, stroke of grinding spindle sleeve 110 mm, diameter of grinding spindle sleeve 100 mm, NEW control: ADCOS CNC 800 (Swiss made) - RETROFIT ! read operating hours 64940, spindle hours 7633, with dressing spindle system: KAISER C 42 DC, magnetic clamping plate , with fire extinguishing device: Kraft Bauer Oil MIST collector: LTA industrial Air Cleaning complete documentation: Hauser and Adcos
x-travel:400 mm y-travel:250 mm workpiece height:max. 500 mm z-travel:500 mm table clamping surface LxW:550x330 mm power requirement:6 kW Total weight, approx.:2200 kg round table d = 300 mm
Description: Multiplier for CNC Machine ISO 50 Holder Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 45 kg
Description: Year of construction: probably 1979 Serial number: 274 Smallest display unit: 0.001 mm Zero point can be selected as required Guaranteed positioning accuracy: 0.002 mm Power requirement of the machine: 7 kW Suction capacity of the air compressor: approx. 9 m³/h Working area: Usable table surface: 595 x 320 mm Adjustment range of the table: 400 x 250 mm Stroke of the vertical slide: approx. 500 mm Max. Clearance between the sanding motor and table: approx. 480 mm Distance between spindle center and vertical slide: 310 mm Max. Sanding diameter: approx. 220 mm Sanding diameter with intermediate plate: approx. 280 mm Max. included angle for conical sanding: 12° Sanding head: Vertical stroke of the sanding spindle, infinitely variable: 3 - 110 mm Stroke speed, infinitely variable: up to 6 m/min Speed of the planetary movement, infinitely variable: approx. 5 - 330 rpm Speed rang ...
Description: Year of construction: probably 1986 Adjustment range: In the X-axis (table slide): 900 mm In the Y-axis (sanding head): 600 mm In the W-axis (moving crossbeam): 635 mm Feed speed: In the X- and Y-axis, direct current drive, infinitely variable: 5 - 2500 mm/min In the W-axis, three-phase drive: approx. 800 mm/min Measured value display: Smallest display unit: 0.001 mm Zero point can be selected as required Positioning accuracy (basic deviation X, Y): 0.004 mm Table: Usable table surface: 1020 x 860 mm Permissible table load: max. 800 kg Width of the T-slots: 14 mm Number of T-slots: 7 Distance between the T-slots: 100 mm Working range of the sanding head: Grinding spindle speeds, infinitely variable with electric motors: 4500 - 80000 rpm With air turbines up to 100000 and 160000 rpm Planetary speed, infinitely variable: 5 - 250 rpm Stroke of the grinding spindle sleeve: max. ...
Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply, servo amplifier -Manufacturer: Hauser, servo controller servo amplifier 2 pieces with rack -Type: HBV 750 SEO HBMR 55 A4-445 -Price/charge: complete -Total dimensions: 390/250/H310 mm -Weight: 8.4 kg
Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply -Manufacturer: Hauser, Servo Drive basic device -Type: 951-300000 NMD 10/B -Dimensions: 450/80/H350 mm -Weight: 7.3 kg
Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply -Manufacturer: Hauser, Servo Drive basic device -Type: 951-100200 Compax 0500-M -Number: 3x servo module available -Price per piece -Dimensions: 450/80/H350 mm -Weight: 6.8 kg/pc.
Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets, Robot.Made in Switzerland
Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets; Robot Made in Switzerland
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 1 column execution Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y axis): 200 mm Travel of the vertical slide: 250 mm Passage from grinding motor to table: 270 mm Max. grinding diameter: 15 mm Vertical travel of grinding spindle: stepless from: 2 mm up to: 32 mm Travel speeds: steps: 2 from: 4.0 m/min up to: 5.0 m/min Possible grinding-spindle speeds: stepless up to: 120000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 750 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1600 mm Various accessories: Rotary table diameter: 300 mm Set of clamping tools Air turbine
Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 560 mm Screen height: 460 mm Microscope stage length: 210 mm Microscope stage width: 150 mm Longitudinal way: 50 mm Transversal way: 30 mm Diameter of the glass table: 80 mm Amplifications: 10: 1 x 20: 1 x 50: 1 x 100: 1 x Change of objective with: slide Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 1100 mm Width: 700 mm Height: 1900 mm Various accessories: Obscuration device
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Centre height: 102 mm Distance between centres: 370 mm Overall dimensions machine: Length: 400 mm Width: 200 mm Height: 300 mm
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Centre height: 102 mm Distance between centres: 370 mm Overall dimensions machine: Length: 400 mm Width: 200 mm Height: 300 mm
Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 600 mm Spindle speeds: stepless from: 120 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 HP Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1400 mm Width: 1500 mm Height: 2100 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: ACU RITE III Rotary table diameter
Technical data Rotary table Clamping surface: Diameter: 220 mm
Technical data Rotary table Clamping surface: Diameter: 300 mm
Technical data Screen diameter: 600 mm Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 220 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 2000 mm Various accessories: Obscuration device
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: CNC 311 Technical data Table length: 770 mm Table width: 630 mm Table load max.: 500 kg Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 450 mm Verticla travel (W-axis): 500 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Stroke of spindle-nose: 125 mm Max. angle with taper grinding: up to: 16 ° up to grinding depth: 44 mm Alternating stroke mouvement, infinitely adjust. from Vmin.: 0.5 mm/min up to Vmax.: 12000 mm/min Stroke frequency Z: 4 Hz Radiale fine feed U-axis up to: 5.5 mm Planetary motion speeds: c axis stepless from: 5 rpm up to: 250 rpm Possible grinding-spindle speeds: stepless from: 4500 rpm up to: 80000 rpm With air-turbine max.: 160000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 5600 kg Overall dim ...
Control: FANUC 0iMD / 31 Technical data 1 column execution Table length: 600 mm Table width: 380 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Travel of the vertical slide: 450 mm Passage from grinding motor to table: 485 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Stroke of spindle-nose: 340 mm Max. angle with taper grinding: up to: 16 ° Vertical travel of grinding spindle: stepless from: 1 mm up to: 110 mm Travel speeds: stepless from: 0.5 m/min up to: 12 m/min Planetary motion speeds: c axis stepless from: 5 rpm up to: 250 rpm Voltage 50 Hz 3x: 440 / 60 Hz Volt Total power required: 10.2 HP Machine´s weight about: 4000 kg Overall dimensions machine: Length: 2700 mm Width: 1700 mm Height: 2850 mm Various accessories: Mecanic Rotary table diameter Coolant system Measurement system Manufacturer: HEIDENHAIN Grinding motor 45 S Grindin ...
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16-M Technical data 1 column execution Table length: 600 mm Table width: 380 mm Longitudinal travel (X-axis): 500 mm Transversal travel (y axis): 300 mm Travel of the vertical slide: 450 mm Passage from grinding motor to table: 485 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Stroke of spindle-nose: 340 mm Max. angle with taper grinding: up to: 16 ° Vertical travel of grinding spindle: stepless from: 1 mm up to: 110 mm Travel speeds: stepless from: 0.5 m/min up to: 12.0 m/min Planetary motion speeds: c axis stepless from: 5 rpm up to: 250 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 10.2 HP Machine´s weight about: 4000 kg Overall dimensions machine: Length: 2700 mm Width: 1700 mm Height: 2850 mm Various accessories: fi ...
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 1 column execution Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y axis): 200 mm Travel of the vertical slide: 250 mm Passage from grinding motor to table: 270 mm Max. grinding diameter: 15 mm Vertical travel of grinding spindle: stepless from: 2 mm up to: 32 mm Travel speeds: steps: 2 from: 4.0 m/min up to: 5.0 m/min Possible grinding-spindle speeds: stepless up to: 120000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 750 kg Overall dimensions machine: Length: 1100 mm Width: 1000 mm Height: 1800 mm
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Cross table Execution: Horizontal Clamping surface: Length: 270 mm Width: 175 mm Travels: longitudinal: 120 mm Crosswise: 120 mm Table height: 125 mm Number of T-channels: 4 T-channel width: 14H7 mm Dimensions: Length: 350 mm Width: 250 mm Height: 200 mm