used MATEC for sale

Briquetting press MATEC F-Cube 20 new Dimension press LxWxH: 130x74x112 cm weight 233 kg Briquette square 30x30 mm Capacity approx. 10-25 kg briquettes / hour Size feed funnel approx. 0.33 m3 Motor hydraulic pump 2.2 kW, 3x 400 V, 50 Hz Electricity consumption approx. 1.1 kWh How we work Continuous operation Year of construction 2021 Additional options: - Extension line for briquettes with stand -Auto. Start-stop system for operation with level monitoring - Sensors for level monitoring - Hydraulic oil 30 liters - 3 m cable with Euro plug 16 A - Flange adjustment filter-hopper press The spec. Density of briquettes is about 900 kg / m3. The maximum wood moisture content is 15%. The measured noise level is 62 dB. New machine, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden  ...

Matec 50 HV/NC 5-Axis (Traveling Column) CNC Vertical Machining Center Table size 1150 x 510 mm. NC rotary table (integrated) 1000 mm Travel X-axis 4000 mm. Travel Y-axis 1000 mm. Travel Z-axis 1300 mm. Number of tool places 48 pieces. Maximum speed of the working spindle 8,000 rpm. Tool holder HSK 100 A CNC control Heidenhain i TNC 530 If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request

BRAND: MATEC YEAR: 2002 MODEL: 30P APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 10400 MM MEASUREMENTS DEPTH: 5300 MM MEASUREMENTS HEIGHT: 5300 MM CONTROL UNIT BRAND: BOSH MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 9000 1/MIN NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 4000 MM Y-AXIS MOVEMENT: 2100 MM Z-AXIS MOVEMENT: 1200 MM TOOLS SLOTS IN STORAGE: 70 TYPE OF TOOL HOLDER: SK 40 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - DISTANCE BETWEEN COLUMNS 2400 MM - X = 4000 MM QUALITATIVE MACHINE BENEFITS: - RETROFIT 2022

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

Vertical CNC machining center Manufacturer Matec Type HV 30 Year of construction 2000 Control Heidenhain TNC 426 Schwenkopf ( B-axis ) 3° degrees shepherd toothing Travel X/Y/Z 3000/600/800mm SK40 24-fold tool changer Speed range 20 - 15,000 rpm is throttled to 12,000 rpm Machine has milled 100% plastic coolant tank has never seen emulsion. It is in very good condition.

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Power fork with spring compensation for long goods or pallets payload 2500 kg Fork length 800 mm Year of construction 2015 Position of the forks according to customer requirements The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Magnetic drum MATEC For iron capture Length about 400 mm Drive about 0.37 kW Gearbox engine with tin slide Weight about 150 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Volcanoring MATEC V.1.0 The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached ...

Volcanoring MATEC mini The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Volcanosquare MATEC The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Scratch chain conveyor MATEC For wood chip extraction -Trogwidth 300 mm -Troghheight 450 mm -Troglänge about 5500 mm -Steel sheet 4 mm -Creation below once about 65 ° -Discard height from ground about 4500 mm -single-stranded chain guide links A-A 80 mm -Conveyor slats plastic height about 130 mm -Drive snail gearbox engine electric 1.5 kW, 3x400 V, 50 Hz Weight about 1100 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

BRAND: MATEC YEAR: 2018 MODEL: 30HV APPLICATION TYPE: MILLING LOCATION: GERMANY MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: HEIDENHAIN MAIN DRIVE SPINDLE SPEED RANGE: 20-9000 1/MIN SPINDLE MOTOR POWER: 11-16 KW NUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 3000 MM Y-AXIS MOVEMENT: 800 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - EJECTION HEIGHT: 1130 MM - 4 AXIS, SWIVEL HEAD +/- 95° WITH 1° POSITION INDEXING

CNC Vertical Machining center MATEC 30 L, control system Heidenhain

Matec 30 L, Year of construction 2011, Control Heidenhain iTNC 530, travel X/Y/Z1300/600/700 mm, spindle speed up to 12,000 rpm, Recording HSK 63 - A, Elketr. Handwheel IKZ 20 bar, paper tape filters, Ww 80 fold, Full cladding working chamber, you. Measuring systems, Conveyor bellows with steel slats, 3D probes, Laser measuring device,

Matec 30 L, Year of construction 2010, Control Heidenhain iTNC 530, travel X/Y/Z1300/600/700 mm, spindle speed up to 12,000 rpm, Recording HSK 63 - A, Elketr. Handwheel IKZ 20 bar, paper tape filters, Ww 80 fold, Full cladding working chamber, you. Measuring systems, Conveyor bellows with steel slats, 3D probes, Laser measuring device,

x-travel: 3000 mm y-travel: 600 mm z-travel: 800 mm Control: Heidenhain TNC 426 tool changer for ... units: 48 turning speeds: 9000 U/min feed: 3000 mm/min rapid traverse: 30 m/min total power requirement: 15 kW svivel milling head inner cooling center with coolant system: 20 bar full encapsulation hydraulical clamping 4 circuit, 400 bar side loading door The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 800 mm z-travel: 1100 mm Control: total power requirement: 60 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 7,0 X 6,0 X 4,0 m For sale is a Matec 30 HV machine number 569 built in 2003. The machine is expected to be released in August 2024 and can be used under Electricity can be visited. The machine has been serviced every year and is technical in a good condition. Manufacturer: Matec Maschinenbau Type: 30HV Machine number: 569 Year of construction: 11/2003 Control: Bosch Type 3 Osa control x-travel 3,000 mm y-travel 800 mm z-travel 1100 mm Main spindle: Type DMS 112 speed range - main spindle max. 12,000 min/-1 Drive power - main spindle 30 kW Max. Torque 190 Nm Tool holder HSK 63 A Drilling capacity steel approx. 60mm Milling capacity approx. 500 cm³ Thread cutting M30 Feeds: Rapid traverse (X / Y / Z) 30 m/min Feed speed 30,000 mm/m ...

x-travel: 2000 mm y-travel: 600 mm z-travel: 700 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 840D 80-fold automatic tool changer chip conveyor Technische Daten / technical details: X-Weg / X-travel 2000 mm Y-Weg / Y-travel 600 mm Z-Weg / Z-travel 700 mm Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich / spindle speed 20-9000 UpM /rpm Tischaufspannfläche / table clamping area 3000x420 mm Werkzeugwechselmagazinplätze / number of tool places in changer 80 Antriebsleistung Spindel 40%ED / drive capacity spindle 40%ED 15 kW Gewicht ca. / weight 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 600 mm z-travel: 500 mm table surface area: 2500 x 650 mm spindle taper: SK 40 control: HEIDENHAIN, TNC 426 ATC: 36 Pos total power requirement: 60 kW weight of the machine ca.: 7,5 t - with coolant through spindle - Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 225 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant - new spindle on X-axis in 2020 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 600 mm z-travel: 800 mm control: Heidehain 430 Weight: / kg voltage: 400 V turning speeds: 9000 U/min max. table load: 2700 kg rapid traverse: 30 m/min feed: 30 m/min Cone: SK40 total power requirement: 48 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

There are two identical machining centers available, table dimensions: 850x530mm, number of tool slots: 48, controls: Heidenhain iTNC 530, operational hours counter machine 1/2: 37,800/36,900h, with tool magazine and documentation.

CONTROLS   CNC controls HEIDENHAIN ITNC 530 BASIC DESIGN   basic design: moving column WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 3000 mm   Y-axis travel: 1000 mm   Z-axis travel: 700 mm   rotating range B-axis from: 105 °   rotating range B-axis up to: -105 ° SPINDLE / HEAD   spindle revolutions (max): 18000 /min   tool fixture: HSK A63   drive power: 23 kW TOOL MAGAZINE   magazin type: chain magazine   number of positions: 48 ELECTRICAL SPECIFICATIONS   total power consumption: 42 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 8500 mm  &nbs ...

This Matec 30P Vertical Machining center was manufactured in the year 2002. It is equipped with a Bosh control unit and has 3 axis. The machine has a spindle speed of 9000 rpm.

This MATEC 30 HV (2003) Universal Machining Centre was manufactured in 2003 in Germany. It is controlled by a BOSCH TYPE 3 OSA Control unit. This CNC traveling column milling machine (3+2 axes) is equipped with a main spindle type DMS 112 with speed range up to max. 12,000 min/-1 and drive power 30 kW. It has a NC swivel head (Sauter) with swiveling +/- 90 ° and graduation +/- 3 arc seconds. In addition it runs with a tool changer with 48 positions and a HSK A63 tool holder. The table is a NC rotary table with a clamping surface of 3,500 x 835 mm and 7 T-slots. IKZ 70 bar, paper belt filter and chip conveyor (ejection height 1200mm) and 3D radio measuring probe come with the machine. The machine is prepared with a 4th axis interface. The condition of the machine is very good - it is still in production and maintenance service has been applied regularly according to manufacturers stand ...

This Matec 30HV Vertical Machining Center was manufactured in the year 2018 in Germany and has 21719 production hours. It is equipped with a HEIDENHAIN TNC 640 control unit and has 4 axis (4 axis, swivel head +/- 105° with 1° position indexing). The machine has a 12,000 1/min motor spindle with 30 kW (40% ED), HSK63, a tool magazine with 48 stations and internal cooling with 70 bar (paper belt filter) and external nozzles on headstock as second coolant circuit with 20 bar. It comes with a chip conveyor (discharge left, height 1130 mm), electronic handwheel and RENISHAW measuring probe. See original delivery note as PDF (German) attached to see all standard and extra options.

x-travel:3000 mm y-travel:1000 mm z-travel:1200/1300 mm spindle taper ISO:50 spindle turning speed - stepless:20 - 8000 U/min power main drive with:40% / 52 kW feed speeds:1- 30000 mm/min rapid speed:30 m/min with CNC Steuerung SIEMENS 840 D autom. toolchanger 60-pockets NC Milling Head +/- 105 Grad stepless or indexing positioning with clamping 2400 Nm / 4200 Nm CNC-table hoirzontal Sempuco SKV-NC 7/600 with zero point clamping fixture 2 component bridges 1500 and 2000 mm max. component weight with counter spindle 3200 kg, cnetre height 410 mm, face plate diameter 600 mm autom. doors, coolant attachment through spindle coolant 40 bar, chip conveyor

x-travel:3000 mm y-travel:1000 mm z-travel:1200/1300 mm spindle motor:32 kW spindle taper: ISO:50 spindle turning speed range:20 - 8000 U/min feed range:1-30000 mm/min rapid traverse feeds:30 m/min total power requirement:80 kW

Matec hf 4.7 machines year 1997 needles 400. Total number of machines 35 of which 18 with two IRO motors for bare machining, 6 with 2 F3000 motors for bare machining, 11 without motors for bare machining

Table length: 3500 mm Table width: 800 mm Longitudinal X: 3000 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 36   Positions APC: 0   CNC Brand: Siemens 5-axis CNC machine (VMC)MATEC - 30 HV SEMPUCO Roatry table Renishaw RMP 60 Renishaw RMI Integrated hydraulic connection for machine vices Working Hours 11.892 H Chip conveyor Filtration & Coolant system X - Travel:               3000mm Y - Travel:               800mm Z - Travel:               800mm A - Axis:                 - 105 to + 105° B - Axis:                 360000° Table Length:             3500mm Table Width:             ...