Inv. Num. : 4970 Type: VS 310-6 Producer: Safan Created: 1981 Parameters: Maximum cutting length: 3100 mm Maximum sheet thickness when cutting: 6 mm Maximum cutting angle: 2 h Oil tank capacity: 150 l Total power requirement: 11 kW Back gauge: 1000 mm Machine weight: 6200 kg
Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg
Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm
Bending capacity 80 t Bending lenght 2550 mm Throat 650 mm Vertical stroke 300 mm
- Pressure: 50 t - Working length: 2550 mm - Stand width: 2050 mm - Bending capacity: at 1 m - up to 10 mm - Space requirements (W x D x H): 2.9 x 1.6 x 2.3 m - Machine weight: 4200 kg - Total power: 4.5 kW - Condition: very good Details little run, very good condition, cylinders all tight, press control type PSSAS Accessories Miscellaneous bending tools, documentation, stands for tools
BRAND: SAFAN YEAR: 2008 MODEL: E-BRAKE 50-2050 TS1 APPLICATION TYPE: BENDING LOCATION: MACEDONIA MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: SAFAN GINDUMAC ID: MK-BEN-SAF-2008-00001 Technical Information CONTROL UNIT BRAND: SAFAN MAIN DRIVE PRESSING FORCE: 500 KN BENDING LENGTH: 2050 MM Additional Equipment - BENDING TOOLS CAN BE INCLUDED ON REQUEST Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - RESPONSE TIME: < 80MS
BRAND: SAFAN YEAR: 2009 MODEL: E-BRAKE 50-2050 APPLICATION TYPE: BENDING LOCATION: MACEDONIA MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: SAFAN GINDUMAC ID: MK-BEN-SAF-2009-00001 Technical Information CONTROL UNIT BRAND: SAFAN MAIN DRIVE PRESSING FORCE: 500 KN BENDING LENGTH: 2040 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - RESPONSE TIME: < 80MS
Safan Holland servo-electric press brake type SMK-L-50-2550 -TS1, rb. 1997. Touch screen -LCD Windows, color , graphics, menu in Polish. Bending length: 2550 mm; Stroke: 215 mm; Between columns: 2650 mm; Load: 50 t CNC TS1 control -simulation of 2 D, Polish language - controlled axes Y1; Y2; X; R(pneuma) -10-point table deflection arrow compensation. In the machine a pneumatic die for felting-flattening sheet metal. Tools: Amada. Drive; 9 kW; dimensions: 3500x1800x 2450 mm, weight 5100 kg. Full DTR documentation, also in Polish, a workstation instruction BiHP in Polish.
Hydraulic press brake by SAFAN Lochem Holland, type SK 25-1650. Manually controlled machine. Very easy to use, fast and undemanding machine for a locksmith workshop, it can work in unheated rooms. Angle, pressure, transition from fast mode to bending mode and jump height are set electronically from the desktop. CNC controlled bumper, departure, cycles, programs. Pressure 25 t x working length 1650. Between sides 1250 mm. Machine weight 3.6 tons. Drives 2.5 kW. Amada system tool mounting, punch + multi-grooved matrix tool set - segmented. Full DTR documentation. Occupational health and safety user manual in Polish.
Capacity 3100 x 8mm TS200 touch screen control Adjustable cutting angle and backgauge Pneumatic high support table
In very good technical condition, the SAFAN Lochem Holland hydraulic press brake rb. 1990/2012, type DNCS 110-3100. Press rebuilt by the manufacturer in 2012. CNC-controlled synchronous machine DNCS ARA- controlled axes- Y1; Y2; R; Crow - Wila table deflection compensation controlled by CNC. In addition, a hydraulic matrix for sheet metal folding-flattening, type DT005, controlled by CNC. The machine is equipped with an automatic sheet support system during bending and flattening at 2 heights. Hydraulic punch clamping. 4 bumper fingers with precision. Pressure 110 t x working length 3100. Between the sides 2600 mm. Machine weight 8.3 t. Drives 7.5 kW. Protection of the working area with infrared. A set of Amada / Trumpf system tools for the entire length of the machine, die V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This enables the 6 mm long window sill to b ...
Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 310-3, 3100 mm x 3 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 5.5 kW motor. The weight of the machine is 4.2 tons. The machine is fast and the number of cuts is equal to that of mechanical ones. CNC electric bumpers with a position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 75-3100 mm. A system for magnetically supporting large sheets of metal while cutting at the rear of the machine. Support 2000 mm angle bracket, to support sheet metal at the front of the machine. Light line enabling line cutting. Original DTR documentation.
Press brake with servo-electric drive Safan Holland type SMK-P-50-2550 -TS1, rb. 1999. Touch screen - LCD Windows, color, graphics, menu in Polish. Bending length: 2550 mm; Stroke: 215 mm; Between columns: 2650 mm; Pressure: 50 t CNC TS1 control - 2D simulation, language Polish - Y1 controlled axes; Y2; X; R; Z1; Z2 -10 point compensation of the table deflection arrow. Infrared barriers are installed in the machine to protect the working area. Tools: Trumpf-Wila - set. Drive; 9 kW; dimensions: 3500x1800x 2450 mm, weight 5500 kg. Full O&M documentation, also in Polish, BiHP workstation manual in Polish.
Capacity: 2050 x 40 tons TS1 Touch Screen CNC Control CNC Rear Swing Wila New Standard top clamp 1 set of tools incl.
Hydraulic press brake from SAFAN Lochem Holland rb in very good technical condition. 1997/ CNC control new 2023, type CNCL 110-4300 TS1. CNC-controlled synchronous machine TS1-Windows 2023, color, bending simulation, touch screen, controlled axes - Y1; Y2; X; R. New control replaced in 2023. Additionally, a hydraulic die for folding and flattening sheet metal, type DT005, CNC-controlled. Hydraulic punch mounting. 4 bumper fingers with precision controls. Pressure 110 t x working length 4300. Stroke: 180 mm. Between sides 3700 mm. Machine weight 11.7 tons. Drives 7.5 kW. A set of Amada/Trumpf system tools for the entire length of the machine, matrix V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This allows you to bend and flatten a 6 mm long window sill. Full DTR documentation. Occupational health and safety user manual in Polish.
Press in continuous operation SMK-K-50-2550 TS2 2001
Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 16-310, 3100 mm x 16 mm (ST40) The machine has a quickly changing gap between the knives with thickness reading, and a hydraulically variable knife angle of 0.5 -3 degrees. 21 pieces of sheet metal holders. 18.5 kW engine. Weight 12.5 t. CNC bumpers with reading and setting device, bumper travel up to 1200 mm. 2 supports to hold sheets of metal at the front of the machine, and a ruler for cutting at a 90-degree angle. Light line on the material, lighting, central lubrication. electronic cutting length adjustment 10-3100 mm. Single or continuous cutting with adjustable intervals between strokes. Very fast guillotine. Knives 90% new, cutting material from 0.5 to 16 mm. Original OHS documentation and occupational health and safety manual in Polish.
Touch screen - Windows, color, graphics, menu in Polish. Bending length: 1250 mm; Stroke: 115 mm; Between columns: 1250 mm; Pressure: 25 t CNC TS1 control - 2D simulation, language Polish - Y1 controlled axes; Y2; X; R(pneumatic) -10 point compensation of the table deflection arrow. Tools: Amada-Set of tools. Drive; 6 kW; dimensions: 1900x1800x 2050 mm, weight 2250 kg. Full O&M documentation, also in Polish, BiHP workstation manual in Polish.
TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled CNC crowning Hydraulic felling table WILA NS Hydraulic top clamping 1 set of tools
Capacity 4300 x 225 tons TS1 CNC Control Y1, Y2, X, R, Z1 and Z1 CNC controlled CNC Bombing Hydraulic Wila NS top clamp
Capacity 2050 x 50 tons Safan TS1 CNC control Manual Wila New Standard clamping X and R axis CNC controlled Includes set of tools
Capacity 3100 x 8 mm Equipped with newer touch controls Adjustable backgauge, cutting angle and cutting clearance Elevated table at the rear
Sale guillotine shears (guillotine) Safan B-Shear 310-6 2013 release in excellent condition, there are all documents on diagnostics and maintenance work performed. Running hours 12 674
Capacity 3100 x 6mm Elevated table at the rear Walk-in protection Return to sender Scrap bin option at the front Machine has just arrived, more photos and information on request
Capacity 3100 x 110 tons TS2 CNC control from Safan Y1, Y2, X and R axis CNC controlled CNC Bombing Wila Babs upper clamp Wila 13mm under clamping Includes 1 set of tools
Hydraulic sheet metal cutting guillotine from Safan Netherlands type VS306, 3100 mm x 6 mm (ST40). The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 deg. 11 kW motor. The weight of the machine is 6,3 t. The machine is fast. Departure of the bumper 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 2 supports for supporting sheet metal at the front of the machine, gauge of 2500 mm, for cutting at an angle of 90 degrees. Light dash for cutting along the line. Original DTR documentation and safety instructions in Polish.
Hydraulic sheet metal cutting guillotine from Safan Netherlands type HVR 6-310, 3100 mm x 6 mm (ST40), rb. 1999. The machine is fully CNC controlled by Safan. The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 st, set after entering the thickness and hardness of the material. 11 kW motor. The weight of the machine is 6.3 t. The machine is b. fast, the number of cuts is equal to mechanical. Electric bumpers with reading, bumper departure 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 3 supports to support sheets at the front of the machine, plus a gauge of 2500 mm, for cutting at 90 degrees. Light dash for cutting along a line. Original DTR documentation and safety instructions in Polish. Riding table at the rear of the machine. Protection of the working space with infrared. The machine structurally adapted ...
Hydraulic press brake by SAFAN Lochem Holland rb.1992 type UCK 80-3150. NC controlled machine with controlled axes - Y1; Y2 Control from the desktop: pressure, bending angle, return and switch to working mode Pressure 80 t x working length 3150 mm. Between sides 2650 mm. Machine weight 6 tons. Drives 7.5 kW. Machine without tools Full DTR documentation. Occupational health and safety user manual in Polish. The machine meets the requirements of the Tools Directive.
Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 2550 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 11 kW motor. Machine weight 8.2 tons. NC electric bumper with position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 30-2550 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation
Cutting thickness Steel: 6mm; Stainless steel cutting thickness: 4mm; Cutting thickness Aluminum: 8mm; Cadence Angle Min: (cps/min) 80; Programmable backgauge stroke: 1000mm; Backgauge speed: 200mm/sec; EQUIPMENT: CNC controlling the clearance between blades and the cutting angle by programming the thickness and grade of the sheet metal Support of thin sheets; Hybrid machine 22 liters of oil
Cutting bench cutting scissors sheet metal shears Type: Hydraulic Manufacturer: Safan Type: HVR 850-8 Year of construction: 1997 Refurbished: 2021 (also new knives) Steering: Conventional Electrical stop Cutting width: 8500mm Cutting thickness: 8mm Backgauge: 1000mm Motor power: 15 kW Incl. documentation Machine dimensions for transport: 9530x2750x2955mm + extra parts Machine goes 550mm into the floor, but it can also be mounted on beams (see drawings) Machine weight: 55000kg
Hydraulic pump, hydraulic unit, hydraulic container, hydraulic tank -Manufacturer: Safan, hydraulic container from press brake type UC 110-3100 -Level indicator: sight glass -Total dimensions: 1950/540/H485 mm -Weight: 69 kg
Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Manufacturer: Safan, 2 hydraulic cylinders from press brake type UC 110-3100 -Piston rod: Ø 150 mm -Stroke: 180mm -Piston: with return spring -Add-on parts/directional valves: see photos -Price/tax: complete -Dimensions: 640/225/220 mm/piece -Weight: 270kg/piece
4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Rexroth, hydraulic control block from guillotine shears SafanTyp VS 255-4 -Hydraulic valve: Hoerbiger L-VAM220PO6A1P -Dimension.: 450/310/H250 mm -Weight: 19 kg
Stop for press brake, cant bench, guillotine shears ... -Manufacturer: Safan, stop for guillotine shears type VS 255-4 -Stop length: 2500 mm -Motor: ICME 0.18kW -Clamping angle: 2 pieces -Individual components: dimensions see photos -Transport dimension: 2500/1040/H220 mm -Weight 324 kg
plate thickness: 3 mm blade length: 250 mm angle adjustable from - to: fest 90 Grad table surface area: 900 x 790 mm total power requirement: kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,9 x 1,2 m notching machine - foot switch - Emergency stop switch - variable release angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3000 mm plate thickness: 3 mm distance between columns: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3 axes: Y1 / Y2 / X touchscreen control Willa upper tooling Capacity: 40 ton x 2050 mm Backgauge: CNC Control: TS Passage between uprights: 2050 mm Max stroke: 115 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 13,5 kW Length: 2900 mm Depth: 1850 mm Height: 2620 mm Weight: 3150 kg
Y1 + Y2 + X + V (Hydraulic crowning in table) Capacity: 80 ton Backgauge: CNC Control: CNC Safan Passage between uprights: 2050 mm Max stroke: 140 mm Max distance between table -- ram: 430 mm Depth of throat: 400 mm Table width: 55 mm Locking speed: 65 mm/sec Working speed: 9 mm/sec Returning speed: 57 mm/sec Electric motor (power): 5,5 kW Length: 3050 mm Depth: 1550 mm Height: 2450 mm Weight: 5,8 ton
Safan HVS 2050 x 16 mm Cutting length: 2050 mm Max sheet thickness st 45: 16 mm Backgauge: 1250 mm Adjustable cuttingedge: 0,5 > 4° Electric motor (power): 18,5 kW Length: 3100 mm Depth: 2530 mm Height: 2000 mm Weight: 9 ton Number of sheet holders: 11x
Sheet thickness: 6,00 mm void: 3100 Table length: 0 mm Table width: 0 mm Knife length: 0 mm MACH-id 3505 MAKE Safan Darley Holland TYPE B Schear YEAR 2007 SPECIFICATIONS Controll CNC Touchscreen Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3100 mm Maximum sheet thickness 6 mm Backgauge stroke X in mm1000 mm DIMENSIONS Length 3800 mm Width 2200 mm Height 2100 mm
Capacity: 200 t Folding length: 4100 mm (1) Down stroke / (2) Up stroke: 1 CNC Brand: Safan CNC Model: ARA Touchscreen MACH-id 6042 MAKE Safan Darley Holland TYPE E-BRAKE 200 - 4100 YOP 2010 SPECIFICATIONS Max. bending length 4100 mm Distance between column 4100 mm Max. pressing force 200 T Dis. Beam - Table 690 mm Beam stroke 300 mm Approch speed 200 mm/min. Working speed 10 mm/min. Return feed 100 mm/min. Adjustment X-Axis back gauge   ...
Capacity: 80 t Folding length: 2550 mm CNC Brand: Safan CNC Model: TS1 MACH-id 5585 MAKE Safan Darley Holland TYPE SMK - K 80 - 2550 TS1 YOP 2003 SPECIFICATIONS Max. bending length 2550 mm Distance between column 2550 mm Max. pressing force 80 T Beam stroke 115 mm Approch speed 115 mm/min. Working speed 90 mm/min. Return feed 100 mm/min. Adjustment X-Axis bac gauge 700 mm Number of controlled axis X, R, Z1, Z2 Co ...
Capacity: 110 t Folding length: 4300 mm CNC Brand: _Unknown / Other CNC Model: Touchscreen TS3 MACH-id 4144 MAKE Safan - Darley Holland TYPE PLCS 110 - 4300 YEAR 1998 SPECIFICATIONS Controll Touchscreen TS3 Pressbrake / Folding / Mech. / Hydr. Pressbrake Hydraulic / Mechanical Hydraulic Bending length 4300 mm Distance between column 3600 mm Press force 110 Ton Throat 400 mm Stroke 180 mm Die height 480 mm Backgauge stroke X in mm 1000 mm Number off controlled axis 4 Power 7.5 kW ...
Capacity: 25 t Folding length: 1250 mm CNC Brand: _Unknown / Other CNC Model: ARA Touchscreen TS1 MACH-id 4147 MAKE Safan Darley TYPE SMK 15 - 1250 TS1 YEAR 1999 SPECIFICATIONS Controll ARA Touchscreen TS1 Pressbrake / Folding / Mech. / Hydr. Pressbrake Hydraulic / Mechanical Mechanical Bending length 1250 mm Distance between column 1250 mm Press force 25 Ton Stroke 115 mm Backgauge stroke X in mm 600 mm Number off controlled axis 3 Power 6 kW DIMENSIONS Length 1600 mm Width&nbs ...
Capacity: 110 t Folding length: 3100 mm CNC Brand: _Unknown / Other CNC Model: CNCL PressbrakeSAFAN - CNCL MACH-ID 7658 Make: SAFAN Type: CNCL Year: 1993 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 110T Dis. Beam - Table: 480mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 65mm/min. Working speed: 9mm/min. Return speed: 65mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 4 Power: ...
Sheet thickness: 13,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm Maximum sheet thickness: 13mm Max. cutting length: 3.100mm Strokes on full length: 18mm Strokes in short 1000 length:46 Cutting angle: 0,5 - 3 ° Length backgauge: 0 - 1250 mm Number of down holders: 20 Approach speed: 125mm/sec. Control: TS 200 Power: 30 kW Length: 4.800 mm Width: 4.800 mm  ...
Capacity: 240 t Folding length: 4100 mm CNC Brand: Safan CNC Model: E-Control CNC Max. bending length: 4.100mm Distance between column: 3.600mm Max. pressing force: 240T Dis. Beam – Table: 725mm Beam stroke: 335mm Troth beam: 400mm Approch speed: 140mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis: 6 = Y1/Y2/V/Z1/Z2/Delta Control: E-Control Touchscreen Crow ...
Capacity: 50 t Folding length: 2050 mm MACH-id 5319 MAKE Safan Darley Holland TYPE UCK 50 - 2050 YOP 1987 SPECIFICATIONS Max. bending length 2050 mm Distance between column 1600 mm Max. pressing force 50 T Dis. Beam - Table 350 mm Beam stroke 115 mm Table Width 100 mm Troth beam 400 mm Approch speed 60 mm/min. Working speed 10 mm/min. Return feed 53 mm/min. Adjustment X-Axis bac gauge 500 mm Number of controlled axis &nbs ...