Pumps were used for the distribution of well water. For performance data pumps and motor, see power plates. Price is valid for 2 complete strands. ( Motor with pump on platform .) A 4.5 m3 m VA container was used as a template. ( see other entry )
Stork S 5500-2150 Year of construction: 2002 Brand: Stork Specifications Spray weight: 1.218 g Clamping force: 5500 kN Screw diameter: 72 mm Spar spacing: 1010 x 1010 mm Clamping plate size: 1475 x 1485 mm Tool installation height min.: 300 mm Control: CDS-600 Operating hours: 29,000 h Language: English,Polish Power: 190 kW Weight: 40200 kg Core train: Yes Euromap: Yes Air valve: Yes Heizkanāle: Yes Toggle lever locking unit: Yes Gas storage: Yes
1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.
EQUIPMENT: acid-resistant impeller and housing Manufacturer: STORK Pumpen Type: FRER 80-140 Dimensions: 1000 x 400 x 550 mm Blunt: DN80; DN80 Voltage: 400 V Power: 5.5 kW
Used Marel Stork THV 630 former is used for shaping and forming various meat products, such as burgers, meatballs, nuggets, sausages, and patties. It helps create uniform shapes and sizes for consistent portioning and presentation. THV 630 former has a belt width of 630mm. This width allows for efficient processing of meat products within that range. Marel is known for prioritizing hygiene and food safety in their equipment designs. The THV 630 former is designed with features that facilitate easy cleaning and sanitization. It typically has removable parts, smooth surfaces, and meets the necessary food-grade standards. The THV 630 former is equipped with advanced automation and control systems. These systems offer precise control over shaping parameters, production speed, and product consistency. The automation features help improve efficiency, reduce labor requirements, and ens ...
Stork N-2500-1400 Year of construction: 2005 Injection unit: Spray pressure (max.) 2100 bar Injection volume (max.) 595 ccm Injection weight PS (max.) 565 g Spraying speed (max.) 299 ccm/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the spars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between tension p. Options: Core pull (time limit switch) Freely programmable Ejector plate (end position control) ...
Doseuse Stork DTF Type: Masterfill 5 Power: 16 kW Power: 400 V Tri Temperature: -10C / 40C 5 pumps 5 nozzles 5 blades Dimensions: 1502.5 x 935 x 1782.65 mm (L x l x H)
STORk RHO40 Homogenisator. 3800 l/hr, 250 Bar, eine stufig. ausgestattet mit dem hydraulischen bedienten Drehende homogenisierventil. völlig wieder instand gesetzt, sehr gutem Zustand.
STORK RHO40 homogeniser. 3800 l/hr, 250 bar, single stage. equipped with hydraulic operated rotating homogenising valve. fully reconditioned, excellent condition.
Product number: 1958WB Type: TFM630 Serial number: 10092057 Year of construction: 2011 Belt width: 630 mm Dimensions: 3000 x 1100 x 1800 mm
Product number: 1959WB Type: TPJ630 Serial number: 4T210793 Year of construction: 1999 Belt width: 630 mm Power: 3 x 380V, 50Hz Dimensions: 2700 x 1250 x 2100 mm For standard crumbs and japanese crumbs
Kat. No. 12-2155 in a very good condition max. working pressure allowed: 1,8 bar max. temperature allowed: 130°C DxH: 1800 x 5000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Product number: 2339 Type: TSO600/96/4 EL Serial number: 10066195 Year of construction: 2008 Model: counter-clock-rotated, left hand side Belt width: 600 mm Tiers: 2 x 4 pcs. Product gap: 135 mm Heating: electric, 4 x 100kW Steam: 7.5-8 Bar, 525 kg/hr Power: 3 x 400V, 50Hz, 440kW Dimensions: 11040 x 3994 x 3287 mm Weight: 20000 kg
all stainless steel electrically heated 127 kW frying length 5.000 mm belt width 400 mm adjustable speed oil level control oil circulation pump sediment removal system electrical hoists fire protection overall dimensions (l x w x h) : ± 8.300 x 2.000x 2.700 mm outfeed conveyor teflon-infeed
all stainless steel electrically heated 4 x 9 kW frying length 1,500 mm belt width 400 mm adjustable speed oil level control manual hoists suitable for fire protection overall dimensions (l x w x h) : x 4,350 x 1,750 x 2,250 mm
Dear's Sale, Stork DRO218 engine's Up block, comp cover, piston, conrod, pump, liner... Ready for transports. Best Regards info@kscege.com
Stork box closing machine, plastic infeed belt, belt width: 500 mm, total dimensions infeed belt: 800 mm x 1000 mm x 600 mm, clearance: 490 mm x 700 mm, plastic rollers, roller width: 600 mm, with Nordson glue unit, type: 3400-2AA12/A, total dimensions: 2050 mm x 1220 mm x 1650 mm.
screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw size: 133 mm injection shot weight in Polysterol: 5940 g/PS closing pressure: 8000 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw size: 115 mm injection shot weight in Polysterol: 3915 g/PS closing pressure: 6600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 56,736h.
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 50,409h.
Clamping force: 2500kN, clamping plate dimensions: 840x904mm, opening stroke: 520mm, screw diameter: 72mm, length: 6500mm, width: 1465mm, height: 2030mm, weight: 6.4t, operational hours counter: 100,662h.
Including spare parts, without accessories, was maintained regularly.
including spare parts, without accessories, was maintained regularly.
Including spare parts, without accessories, was maintained regularly.
Model: HVV 16; 16 filling valves. Overhauled in 2013 filling valves: 16 working direction: right-left (CCW) filling system: vacuum filling More then 300 machines new and second hand on our seema .de
GLUING MACHINE, STORK, TYPE: ERT 630 Technical description: Bandwidht: 630 mm Material: Stainless steel Aisi 304 Power supply: 380/440 V - 50/60Hz Dimensions: 1500 x 1200 x 1800 mm
Used Stork VR48/8 48 Head Vacuum Filler Manufacturer: Stork Model: VR48/8 Operates Right to Left Dimensions: 3.2m (W) 2.9m (L) 3.0m (H) Comes Complete with 8 Head Capper and Control Panel. Last used for filling Juice. Option to buy in conjunction with corresponding rinser (M0357).
Used Stork 75/10KS/1 20 Head Vacuum Filler Manufacturer: Stork Model: 75/10KS/1 Year of Manufacture: 1983 Operates Left to Right Comes Complete with Vacuum Pump (M0153) Dimensions: 1.9m (L) 2.7m (W) 2.45m (H)
Schneckendurchmesser/Screw Dia: 72 mm Hubvolumen/Swept Volume: 1283 ccm Spritzgewicht/Shot Weight: 1218 g Spritzdruck/Injection Pressure: 1600 bar Schliesskraft/Clamping Force: 5500 kN Holmabstand/Tie Bar Distance: 1010 x 1010 mm Aufspannplattengrosse/Platen Size: 1475 x 1485 mm Werkzeugeinbauhohe min./Mould height min.: 300 mm Werkzeugeinbauhohe max./Mould height max.: 1250 mm Offnungsweg/Opening Stroke: 940 mm Plattenabstand max/Total day-light max: 2190 mm Betriebsstunden /Working hours 29.000 h Leistung/Power: 190 kW Abmessung/Dimensions(LxWxH): 9,4 x 2,8 x 2,7 m Gewicht/Weight: 40200 kg Ausstattung/Equipment Sprache/Language: Englisch/English , Polnisch/Polish Luftventil/ Air valve: 9x Roboterschnittstelle / Robot slot: Euro 12 Kernzug/ Core pullers: 2x Heizkanal/ heating channel: 32x Trichter/ hopper: Yes Control: IPC 150, CDS-600
Manufacturing number: 74448 Production Year: 1983 Closing force: 4,400 kN Maximum opening stroke: 720 mm Mold height min / max: 200/720 mm Screw diameter: 84 mm Technical condition: good The machine is connected to electricity (you can see how it works)
Manufacturing Number: 41757 Production Year: 1985 Closing force: 1750 kN Maximum opening stroke: 450 mm Mold height min / max: 200/500 mm Screw diameter: 52 mm Technical condition: good The machine is connected to electricity (you can see how it works)
The price is for the entire, complete line. It is possible to purchase individual devices separately. Used STORK 0.75 l non-carbonated bottling line - capacity about 8 000 bottles / h - Bottle formats: 750 ml - The line bottled non-carbonated/quiet wine hot. - Possibility to check, run the line before purchase. - Available on hand. The line includes: 1. bottle unloader for returnable bottles Kettner 1988 (Konti- Auspacker). 2. label ripper 3. returnable bottle washer Krones (KES 1-3-212, 1992) 4. soda lye detector (Michael Horst, miho LC2000 5. Stork pouring machine (VD48/8, 1978), 48 pourers 6. AROL -SATURNOR12T600 capping machine, 1991 7. Rolex automatic sealer (type: SWK-800, 2001). 8. plate pasteurizer 9. manual pressing machine 10. banding machine (KRONES, Taxomatic, 1995). 11. bottle crate loader (Kettner, Konti- Einpacker, 1988) 12. conveyors 13. cont ...
Manufacturing Number: 42552 Production Year: 1991 Closing force: 2500 kN Maximum opening stroke: 520 mm Mold height min / max: 200/525 mm Screw diameter: 57 mm Technical condition: good The machine is disconnected from the power supply (not working)
Stork S6600-5650 injection molding machine Year of production: 2011 Total installed power: 90 kW Max. injection speed: 500 mm / s Max. injection pressure: 1650 bar Screw diameter: Ã84 mm Max. shot weight for PP: 2042 g Mold closing force: 6600kN Clearance between H x V columns (â x â): 900 x 900 mm Mold height min: 300 mm Max. mold height: 900 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 680 mm Centering rings diameter: 200 mm Max. ejector stroke: 300 mm Dimensions of the mold mounting plates H x V: 1370 x 1370 mm Aggregate volume: 4527g The diameter of the hole in the mouthpiece: Ã 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.
Clamping force [kN] 12000 Clearance between columns (hxv) [mm] 1200 x 1200 min./ max. mold height [mm] 500 - 1695 Maximum opening width [mm] 2000 injection unit Screw diameter [mm] 100 Injection volume [cm3] 4800 Injection weight [g] 4363 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 70