used STROMAB for sale

AUTOMATIC CUTTING SAW machine model STROMAB PS 45 for solid wood, wooden packaging, furniture and others second hand machine with automatic movement of unit volt. 380/50 roller conveyor of mt. 2 to the right of the blade roller conveyor of mt. 2 to the left of the blade technical details : motor power Hp 5,5 blade diameter mm.450 blade hole diameter mm.30 Blade Speed RPM 2800 cut-off capacity mm 510 x 130 (H) net weight Kg.600

AUTOMATIC CUT-OFF SAW model STROMAB TR 600 second hand machine in excellent working conditions CE regulation : YES machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable working table mm.3000 on right side from saw blade with idle rollers diam.mm.90 working table mm.2000 on left side of saw blade with idle rollers diam.mm.90 n.1 saw blade diam. mm. 600 n.3 side stopper on fence right side of the saw blade technical data: motor power saw blade Hp 12 / Kw 9 motor power hydraulic unit Hp 1,5 / Kw 1,1 saw blade diam. mm.600 speed saw spindle rpm 3000 working hight over ground floor 850 mm working pressure 8 bar weight 450 kg

Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with  ...

Machining center for cutting large beams with 5 axes electronically controlled Maximum height of beam to be cut 300 mm Minimum width of beam to be cut longitudinally 100 mm Sliding table transversal travel 600 mm Swivel surface rotation degrees from 0 to 345° Circular blade dimensions 800 mm Blade motor power HP 20 Maximum working width 650 mm Beam moving system with motorized rubber wheels and pneumatic upper pressers Roller benches of 5500 mm both in entry and exit

Code: 0133 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wood packaging, furniture, window frames and various - CE Standard Technical data: Blade diameter mm 500 F30 Blade speed rpm 2800 Motor Hp 7,5 Cutting capacity mm 510 Cutting depth mm 145 Manual feed Suction mouth diameter mm 150 Infeed roller table mm 1500 Outfeed roller table mm 1500 Weight kg 350

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

AVAILABILITY FROM FEBRUARY 2024 STROMAB pendulum saw model PS/50FP with: - Pneumatic head movement - blade D=500mm - 7.5 HP engine - with roller benches Machine not compliant with CE regulations

Stromab SL1 block press Working length max 3000mm Working height max 1300mm Maximum width of glued material 150mm Press divided into 2 sections Number of vertical cylinders 6 Number of frontal clamps: 1 pneumatic Vertical cylinder stroke 150mm Maximum operating pressure 180 bar CE Certified Weight 850kg Dimensions of the press 3450x1050x2400mm Year of production 2004

Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Cutting cycle: Defect caps by chalk marking cutting with fixed lengths, Standard and sequential cutting, sequential cutting in markup mode. Infeed material: variable lengths for single piece loading WS.1 Continuous cross-cut saw 4 pcs. lower feed rollers 1 pcs. loading table 2 mt. Right with double marking table 1 pcs. outlet table 1 mtr. with rear stop Height of the rollers manually adjusted 12 pieces of luminescence chalk Cutting capacity: P. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Item B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: Color touch screen 7" Machining of cutting cycles directly on the machine Programming variants: - Defect caps by marking - Working with cutting list consists of 10 dimensions, possibility of repetition for any measure and total quantity of each measure 100 memory lo ...

Saw blade feed pneumatic Motor power 7.5 KW Cross-section max. 280 x 135 mm, or 360 x 55 mm complete with: 1 mtr each Work table to the left and right of the saw blade bevelled sheet metal behind saw cut for drainage of Trimming cuts 2-hand control device Front saw blade protection HM saw blade Optionally available: Pneumatic front guard (TR501/P) Upper protective device cutting range (TR501/G) zus. Roller table per mtr. (with roll 60 mm) manual stop 60 mm manual stop 250 mm pneumatic stop 60 mm pneumatic stop 330 mm HM saw blade Laser directional light 220 V

TR 450 MATRIX cross-cut system with automatic cutting cycle by input on the control panel or by cutting list Input material: Single or stacking material with fixed length Applications: Production of pallets, packaging, furniture and garden furniture Cross-section: mm 25x330, 40x310, 60x290, 85x277, 95x265 Min. workpiece thickness 10 mm (with automatic loader 20 mm) Work table inclined 8° Technical characteristics of the sawing unit: Pneumatic sawing unit TR450 Engine power 5.5 hp (4 kW) HM saw blade diam.450 mm., F=30 Z=72 S=4.2 Technical characteristics of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT Feed by rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for a package weight of 80 kg Maximum feed speed 90 m/min Pneumatic lifting of the slider at the end of the cutting cycle and overhead ret ...

I sell an automatic CNC machining center for BLOCK-HOUSE manufacturing Stromab Autoblox. Year of construction 2011. New machine. Cutting saw 600mm / 7,5kW Dubel drilling unit up to dia.35mm x depth up to 320mm Pin milling machine up to dia.230mm / 4kW Horizontal milling machine up to dia.230mm / 4kW Vertical milling machine up to dia.180mm / 4kW Automatic feed system +-1mm Good for the timber construction structures! Available the same.

Sell Stromab oleo-pneumatic saw PS 600 P with infeed and outfeed roller benches year 1999 motor 7,5kW Blade diameter 600mm Capacity : Ht 210mm 90 cut : 450mm/ 45 cut : 320mm Power supply : 380 V + 6 bar compressed air (for the presser and the automatic feed) weight : 700kg no delivery - to be collected

miter square horizontal: +60° / 0° / -45°; miter square vertical: 0° / +45°; cutting hight at 0°: 200 mm; cutting height at 15 °: 190 mm; cutting height at 45°: 115 mm; cutting performance at 0°: 525 mm; cutting performance at 60°: 270 mm; cutting performance at 45°: 370 mm; saw blade diameter: 550 mm; diameter spindle: 30 mm; speed: 2800 U/min; motor power: 4 kW; motor brake: yes, automatically; suction connection: 150 mm; weight: 315 kg; • Aluminium arm • Precision linear guides made of hardened steel • Rotation and tilt from the front of the machine • Emergency stop

Pressing area: 3000 mm x 1800 mm; Number of manual hydraulic cylinders vertical: 3; Number of manual hydraulic cylinders horizontal: 2; Pressing pressure: 1500 kg; Machine length: 4000 mm; Machine width: 750 mm; Machine height: 2250 mm; Chassis on wheels, two of which steered Manual hydraulic cylinders height adjustable Vertical sliding posts

Pressing area: 3000 mm x 1800 mm; Design: Wall mounting; Number of manual hydraulic cylinders: 3; Pressing pressure: 1500 kg; Cylinder stroke: 60 mm; Hold-down: 1; Machine Length: Machine Width: Machine height: