used VECOPLAN for sale

1 piece of scratch chain foerderer 900/500 mm (W/T) length = 34 m; Very good

1 piece scratch chain foerderer 650/500 mm (W/D) length 38 m; good

Vecoplan, not Lindner; Single-shaft shredder with feed hopper for refuse-derived fuel production, waste wood, waste and plastics, Material pusher to the rotor in the filling area Removal of contaminants from the pinball system, Screen inserts can be changed to your requirements! New rotor in 2017 with approx. 4000h running time New frequency converter in 2017 New service on the torque motor with 243kW, approx. 12900 operating hours in December 2023 Machine still under construction and available from February 2024 Subject to prior sale!

Ripper 1 axle, with hydraulic pusher, brand: Vecoplan, rotor measures: 1580x350 mm, die: 40x40, motor: 75 Kw (100 hp), hopper measures: 1580x2200 mm. With electrical panel.

Ripper 1 shaft with hydraulic pusher, brand: Vecoplan, rotor measures: 1600x350 mm, dice: 40x40, motor: 75 Kw (100 hp), hopper measures: 1600x2200 mm. No electrical panel.

Chopper, Shredder, Shredder Fabr. Vecoplan Type VAZ 100 / 80 YOC 1994 New engine 18.5 Kw (invoice available) New gearbox (invoice available) Sieve 25 mm with Hydraulic Gate Valve

Shredding plant / chipper / shredder for shredding wood waste - Waste wood waste - Pallets - Packaging material and waste of many kinds Make: VECOPLAN - MASCHINENBAU Type: VAZ 300/180 Silent and slow-running. Propulsion:132. Kw. Rotor width:1800.mm. Rotor diameter:420.mm.(solid steel.) Rotor speed:80-120 rpm Capacity: 1500-2000.kg/h.je by material and task. Tools-knives ( cutting crowns 80x80 mm ) Sieve: 30.mm. round hole reinforced design Hydraulic strainer and rear flap with lowerable counter knife Conveyor belt cut-out 1000.mm. Insertion: approx. 1800 x 3000.mm. Weight: approx. 18.500.Kg. Included: control cabinet system + hydraulic system + operating instructions + electrical circuit diagrams. Dealer price 34.500.00€ net ex location. The machine is in good general condition

Vecoplan wood shredder for waste wood Inlet cross-section 1300 x 1400 mm Feed capacity per hour 500 to 2000 kg Weight approx. 1900 kg Drive 37 kW

COMPLETE REFUSE-DERIVED FUEL PLANT WITH HIGH CAPACITY Year of construction 2009 13,500 operating hours - 1 x pre-shredder TYPE VECOPLAN - 1 x Magnet - 1 x air classifier TYPE WESTERIA - 3 x secondary shredder type VECOPLAN - approx. 150 meters of conveyor belts - Electrical control - Spare parts worth approx. € 70 000 Installed capacity approx. 1200 kW Product size 25 to 80 mm according to customer's requirements. We can dismantle the system and load it onto trucks.

Used secondary shredder with screen basket and torque drive 250kW first owner! Approx. 12500 operating hours, functional condition, new frequency converter since 2017 Dismantled promptly available, with operating instructions, was used as a secondary shredder in the plastic! Optionally with installation and commissioning in Europe Prior sale possible!

Hopper chipper Vecoplan VAZ 700 Yellow Shaft width 700 mm 9/7.5 kw two-speed motor Auto Reverse Hydraulic Drawer Feed inlet 800 x 500 mm Two sieves included Year of Build 2009 Machine weight: 930 kg Machine dimensions: 1900x1500x1900 h mm The chipper is suitable for hardwood and softwood

4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)

CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 76900 PLN Net price: 17089 EUR depending on the price 4.50 EUR Net price: 20237 USD depending on the price of 3.80 USD (Prices may vary with higher fl ...

ORDER NO. 7026 TECHNICAL SPECIFICATIONS - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5,5kW - 3 toothed pulling shafts from above - upper shaft motor 5,5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2,2kW - main engine 90kW - reverse gear, - autorewers - overall dimensions of the machine length / width / height 4600x2350x1700mm - overall dimensions of the feeder length / width / height 4550x980x970mm - total weight about 11000kg – German production, – used chipper, very good condition Net price: 295900 PLN Net price: 66494 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

- German production - autorewers - for the production of technological wood chips - powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - slot width 550 mm - inlet height 260 mm - two knives - engine power 110 kW - conveyor length 5000 mm - sieve 50 x 50 mm - three upper shafts pulling toothed - four lower shafts pulling toothed - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of feed shafts - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

CATALOG NO. 6928 TECHNICAL SPECIFICATIONS - loading hopper inlet 1560x1300mm - rotor working width 1300mm - main engine 36kW - pump motor 2x3kW - number of knives 36pcs - knife size 40x40mm - sieve 30mm, 28mm - pressure drawer - electric autorewers - dimensions of the machine length / width / height 3400x2420x2820mm - control cabinet dimension L/W/H 1000x450x1900mm - dimensions of pumps length / width / height 800x700x850mm - weight about 5000kg ADVANTAGES – German production – for Weima WL 15 – autorewers – pressure drawer – hydraulic pressure drawer from above – improves machine efficiency – very good condition – used chipper Net price: 169900 PLN Net price: 37756EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Shredder Vecoplan, type HR 75/35, for wood, packaging material, bark, wood waste Manufacturer: Vecoplan Type: HR 75/35 Year of construction 1987 Drive: 45 kW Filling opening: 750 x 350 mm Rotor diameter: 700 mm Number of cleavers: 2-4 Chopping length: 5-30 mm Throughput: max. 35 cbm/h Screen hole: 65 mm, 2 x 35 mm Dimensions: approx. 1500 x 1500 x 1400 mm (LxWxH) Weight: approx. 4,400 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or for any errors.

VECOPLAN VAZ 220/200 KNF, single shaft shredder for plastics, constructed in 2000, imfeed width 2200 mm, working width: 2000 mm, Rotor Ø 495 mm, n.56 knives size 60 x 60 mm., Rotor speed 125 rpm, 132 kW drive, 400V 50 Hz, Machine weight : about 14 tons, Upper ram, feeding hopper, various screens available, Electrical panel, Users manual, drawings available, This machine is offered totally reconditioned, (last group of photos is of a twin machine just reconditioned), width: 2.000 mm. (78.74), Power: 132kw