1 piece of plan knife head 210 mm 12 Cutting 1 piece corner corner fraeser WALTER 200 mm, F2010 12 cutting Further: Diverse crankshaft fraeser GFM
2 stubof disc sores WALTER 125 mm, F2052 1 stueck prism fraeser Walter F2052-460 170.6 / 171.2 2 piece disc freser WALTER 142 mm, F252-925
The WALTER SF 37 KS screw compressor was manufactured in 2014 by the WALTER Kompressortechnik brand. The freestanding screw compressor has direct drive and built-in inverter. The compressor is offered as a set with a 3000 dm3 vertical expansion tank and WDFC 396 refrigeration dryer, with an integrated control panel and a built-in filter 1 and 0.01 u. Technical parameters of the screw compressor: - pressure: 10 bar - capacity: 5.8 m3 / min - power: 37 kW - connection: R 1 1/4 " - volume: 71 db (A) - weight: 715 kg - length: 1575 mm - width: 1030 mm - height: 1750 mm Technical data of the refrigeration dryer: - capacity: 396 m3 / h - capacity: 6.6 m3 / min - connection: 2 " - voltage: 230/1/50 V - refrigerant: R134.a - pressure drop: 120 mbar - working pressure: 16 - built-in 2 micron filters: 1 and 0.01 - dehumidifier weight: 120 kg - length: 750 mm - width: 700 ...
Order No. 6712 TECHNICAL DATA - min. board length after formatting 800mm - max length of the board after formatting is 1300mm - max board width 270mm - max board height 70mm - max diameter of the disc 350mm - shield on the discs (serves as a pressure) - spindle diameters 60mm - length of spindles working part 260mm - main engine power 4kW - feed motor power 0.75kW - 2 feed speeds - dimensions of the table top 1820x15100mm - diameter of the extraction connector 2x100mm - overall dimensions: length / width / height 1900x1900x1400mm - weight 578 kg ADVANTAGES - Polish production - for processing a pallet board - used saw, very good condition Net price: PLN 14900 Net price: EUR 3311 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)
Article number: 27-04-004 Manufacturer: Walter Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: approx. 600x600x400mm Weight: approx. 300kg Digital display: 1-axis digital display Heidenhain Encoder: Heidenhain Resolution: 0.001 degree Face plate diameter: approx. 400mm Clamping T-slots: 4 pieces of 14mm each Rod passage: approx. Ø 40mm Indexing: manual via handwheel Quick indexing: Electrically via shaft stump & e.g. cordless screwdriver Max.table load: Vertical: approx. 200kg Horizontal: approx. 500kg Accessories: Complete Instruction Manual Mechanical table clamping 1x ISO 40 tool holder Display Bracket Handwheel for indexing with extra-long shaft stump 2 pieces of eyebolts for lifting the table Other accessories on request Price and other technical data on request
Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
Little used and is very well maintained, factory No. 3791, in execution with degree - and indirect sharing using disc of part of. Table size 500 mm diameter Height 150 mm Length 710 mm 590 mm width (without drive) T - slot width 16 mm Gear ratio 1: 120 Weight 180 kg Accessories: Part of disc, operating instructions.
HM Corner - Cutter Head - Face Milling Cutter with Inserts. Diameter: 315 mm. Height: 90 mm Bore diameter: 62 mm. Number of inserts: 18 pieces Dimensions of the inserts: Rectangular, 12.8 x 12.8 x 5 mm, positive. Good used and ready to use, without damage to the panel seats. Shipping possible in consultation with the forwarding agent. or self-collection. The part can be viewed in consultation and is immediately available.
Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price
Swivel part ingenous from Walter type HU 150E Peak height is 150mm. Direct divisions via perforated disc possible. Division 1 -24 Haohtcz Indirect sharing is no longer possible, a worm wheel is missing. Use on fraes and drilling machines For more information on request, please note the photos. Special price
Controller FANUC Panel i Sowftware Tool Studio 3 Lisances : MCS, TS_Standard, Profile light, Drills, Calib touch probe, Boost, Steptools
WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg
Walter WDPP-410 edger – Polish production – DTR, CE TECHNICAL PARAMETERS: min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. input material width 500 mm max. width of the finished board 140 mm min. width of the finished board 70 mm circular saw diameter 425 mm capacity 20 m3 right vertical spindle motor power 5.5 kW left vertical spindle motor power 5.5 kW engine speed (vertical saw drive) 2850 rpm horizontal saw engine power 18 kW engine speed (horizontal saw drive) 2850 rpm feed motor rotational speed 1450 rpm feed speed (smooth regulation) 0/20 m/min mains voltage (50 Hz) 3×400 V machine dimensions (length/width/height) 6900 / 1400 / 1380 mm machine weight 1300 kg
– Polish production – DTR, CE – year of manufacture 2011 TECHNICAL PARAMETERS: minimum length of material after formatting 800 mm maximum length of material after formatting 1600 mm maximum material width 480 mm maximum material thickness 145 mm disc diameter 500 mm smoothly adjustable feed 0-20 m/min main motor power 2 x 5,2 kW feed motor power 1.5 kW machine dimensions (L/W/H) 340 / 230 / 180 cm weight 2500 kg
–Manual – CE certificate – after technical inspection – very good condition – year of production 2014 - standard feeding table 3m +3m additional = 6m TECHNICAL PARAMETERS: main motor 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed rate adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls diameter of discs 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor belt three take-up rollers stub diameter 2 x 200 mm dimensions length/width/height 300 x 245 x 180 cm weight ~ 3000 kg
BRAND: WALTER YEAR: 2005 MODEL: HELITRONIC POWER APPLICATION TYPE: GRINDING LOCATION: CZECH REPUBLIC MACHINE TYPE: GRINDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 4650 KG CONTROL UNIT BRAND: WALTER MODEL: HMC 600 XP MAIN DRIVE SPINDLE SPEED RANGE: 9500 1/MIN NUMBER OF AXIS: 5 MOVEMENT X-AXIS MOVEMENT: 460 MM Y-AXIS MOVEMENT: 320 MM Z-AXIS MOVEMENT: 660 MM A-AXIS MOVEMENT: 175 MM WORKPIECE WORKPIECE DRM: 320 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - SPINDLE POWER 11. 5 KW - SPINDLE DIAMETER 80 MM - MAX. DIAMETER OF GRINDING WHEEL 200 MM - HELITRONIC TOOL STUDIO SOFTWARE - RENISHAW PROBE - MIST COLLECTOR DSL - AC UNIT PLUMBERGER - 20PCS CLAMPS WITH GRINDING WHEELS, CALIBRATION MANDREL QUALITATIVE MACHINE BENEFITS: - VERY GOOD CONDITION - "RETROFITTED IN 2020: ...
BRAND: WALTER YEAR: 2004 MODEL: HELITRONIC POWER APPLICATION TYPE: GRINDING LOCATION: POLAND MACHINE TYPE: GRINDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2427 MM MEASUREMENTS DEPTH: 2930 MM MEASUREMENTS HEIGHT: 2273 MM MACHINE WEIGHT: 4200 KG CONTROL UNIT BRAND: WALTER MODEL: HMC 600 MAIN DRIVE SPINDLE SPEED RANGE: 7000 1/MIN SPINDLE MOTOR POWER: 24 KW SPINDLE BORE: 80 MM NUMBER OF AXIS: 5 MOVEMENT X-AXIS MOVEMENT: 460 MM Y-AXIS MOVEMENT: 320 MM Z-AXIS MOVEMENT: 660 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - FIRE SUPPRESSION SYSTEM - TOP OIL MIST FILTER - MAX. GRINDING WHEEL DIAMETER: 200 MM QUALITATIVE MACHINE BENEFITS: - MACHINE IN VERY GOOD, WORKING CONDITION, READY FOR TEST. FULL DOCUMENTATION AVAILABLE.
Tool grinding machine Walter UWS30 CY - original condition - Width: 120cm - Height: 140cm - Depth: 100cm - with electric stroke adjustment - Sub-machine, 8 grinding shots - Grinding wheel pulling device - Electrical documentation + equipment Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.
centre height: - mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: m diameter: 400 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 100 mm weight of the machine ca.: 30 kg dimensions: 300 x 250 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 150 mm chucking diameter: 200 mm indexing: 15 ° groove width: 16 mm weight: 66 kg dimensions of the machine ca.: 550 x 230 x 370 mm - Serial-No.: 2896 - Dividing head can be set up vertically or horizontally - with adjustable counter point - Chuck optionally with 15° graduation, or infinitely variable 360° rotation - chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. grinding diameter: 240 mm grinding length: 255 mm workpiece length: 350 mm total power requirement: 20 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: / mm O. 600 mm Weight: 340 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: / mm chucking diameter: 200 mm hollow: 54 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diameter: 80 mm Number of knives: 54 z= cutting width: / mm Total length: 350mm Length of the cutting edges 200 mm Parts: 80mm Recording: SK50 Pre-screwed with 54 indexable inserts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. relative humidity: 95%, max. operational pressure: 130bar, medium output: 23l/min, ambient temperature: 5-35°C, connected load: 6.5kW, weight: 80kg, with instruction manual, the system is unused.
This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm.
Insert cutter WALTER F2001-103519 R-F2001-103519 Cutting diameter: Ø 51.5 mm Usable length: 45 mm Total length: 105 mm with new inserts ! used, checked ! Dimensions (insert cutter): 105 x 52 x 52 mm
Insert cutter WALTER F2001-103518 R-F2001-103518 Cutting diameter: Ø 49.0 mm Usable length: 50 mm Total length: 111 mm with new inserts ! used, checked ! Dimensions ( insert cutter ): 111 x 50 x 50 mm
Fine boring head, boring head, fine turning tool WALTER B2110M B2110M.0.25.73.029.01 Cutting edge diameter: 22 - 29 mm Total length: 80 mm New ! Dimensions ( fine boring head ): 80 x 25 x 25 mm Dimensions ( transport box ): 88 x 35 x 35 mm
Insert drill, with internal cooling WALTER NOVEX B3010M B3010M.0.50.085.16 Cutting diameter: Ø 16 mm Usable length: 40 mm Total length: 97 mm New Dimensions ( insert drill ): 97 x 50 x 50 mm Dimensions ( transport box ): 130 x 50 x 50 mm
Description: Jaw chuck diameter: 200 mm Approx. Onsite Dimension. (l x w x h): 300 x 200 x 300 mm, weight approx.: 50 kg
Shell end mills, shell mills, milling cutters -Outer diameter: 80 mm -R: 4 -Teeth: 6 -Weight: 1.6 kg
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for tool grinder -Take: SK40 -Tip height: 100 mm -swiveling -Dimensions: 640/260/H290 mm -Weight: 48 kg
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 63 mm -Fresh height: 49 mm -Mounting hole: Ø 22 mm -Weight: 0.75 kg
Shell end mills, shell cutters, milling cutters, indexable inserts -Outer diameter: 50 mm -Teeth: 4 -Weight: 0.5 kg
Shell end mills, shell mills, milling cutters -Outer diameter: 80 mm -Radius: 4 mm -Teeth: 6 -Weight: 1.6 kg
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 125 mm -Height: 30 mm -Socket: Ø 30 mm -Number: 1 cutter -Price: complete -Weight: 2.2 kg
Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Height: 170 mm -Bore center: Ø 48 mm -Weight: 150 kg
Tool holder, milling holder, milling tool, adapter, clamping unit -Manufacturer: Walter, 41 pieces holder/clamping units SK50 -Various types: see photos, more pictures can be sent -Price/sale: complete -Total dimensions: 700/600/260 mm -Weight: 129 kg
Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg
Rotary table, rotary dividing table, dividing attachment, dividing head -Manufacturer: Walter, rotary table type Rts 400 G -Clamping surface: Ø 400 mm -Center bore: Ø 31 mm -Groove width: 14 mm -Dimensions: 700/510/H260 mm -Weight: 294 kg
Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter -Diameter: 160 mm -Number of teeth: 10 -Tungsten carbide inserts: 16 mm -Adjustment: SK50 -Weight: 14 kg
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Recording: MK5 -Tip height: 145 mm -Part head: swiveling -Dimensions: 250/230/H300 mm -Weight: 23 kg
Suitable for fully automatic grinding of all known tooth geometries (e.g. flat, alternating, trapezoidal tooth) from HM – circular saw blades on the face and back in one clamping. The free programming also allows the Machining of special tooth shapes. Accesories: Pallet loader with 3 stations,, Coolant system with total enclosure,, Integrated hollow tooth grinding device,, Software package W 1 alternate tooth,, Software package W 2 flat tooth,, Software package W 3 flat/trapezoidal tooth (with tooth height difference),, Software package W 4 flat / roof tooth (with tooth height difference),, Software package W 5 trapezoidal tooth,, Software package W 6 pointed on one side,, Software package W 7 tooth face processing,,, Software package W 8 free programming of special tooth forms,, automatic tool positioning axis, Automatic D-axis for machining chip breaker grooves, auto. fire extinguish ...