232 ofertas

Año de construcción: usado
Ubicación: Land-evaporative condenser bac vxc 1240 - 4984 kw
 
this evaporative refrigerant (nh3) condenser was delivered by bac france in 2009 but it was never installed. this unit has four separate forced draught, curved plate and belt driven centrifugal fans which are very quiet and energy saving. equipment is suitable for various chiller applications with cooling capacity up to 4984 kw. the equipment is in excellent, new like condition.
 
 
general data:
condensing capacity 4984 kw
refrigerant nh3 - r717
dew point 35.0 ° c
wet -bulb temperature 21.0 ° c - working wet
 
 
technical characteristics
overall length 12233 mm
overall width 3000 mm
total height 4310 mm
shipping / operating weight / 20380/ 25240 kg
weight of the heaviest section 7010 kg
number of fan motors and power 4 x 5.5 k / 1500 rpm
circulation pumps 2 x 4.0 kw
the maximum evaporation 1,797 l / s@ 4984.0 kw
noise level at full load 61 db(a) at 15 meters EVAPORATIVE CONDENSER BAC VXC 1240 - 4984 KW THIS EVAPORATIVE REFRIGERANT (NH3) CONDENSER WAS DELIVERED BY BAC FRANCE IN 2009 BUT IT WAS NEVER INSTALLED. THIS UNIT HAS FOUR SEPARATE FORCED DRAUGHT, CURVED PLATE AND BELT DRIVEN CENTRIFUGAL FANS WHICH ARE VERY QUIET AND ENERGY SAVING. EQUIPMENT IS SUITABLE FOR VARIOUS CHILLER APPLICATIONS WITH COOLING CAPACITY UP TO 4984 KW. THE EQUIPMENT IS IN EXCELLENT, NEW LIKE CONDITION. GENERAL DATA: CONDENSING CAPACITY 4984 KW REFRIGERANT NH3 - R717 DEW POINT 35.0 ° C WET -BULB TEMPERATURE 21.0 ° C - WORKING WET TECHNICAL CHARACTERISTICS OVERALL LENGTH 12233 MM OVERALL WIDTH 3000 MM TOTAL HEIGHT 4310 MM SHIPPING / OPERATING WEIGHT / 20380/ 25240 KG WEIGHT OF THE HEAVIEST SECTION 7010 KG NUMBER OF FAN MOTORS AND POWER 4 X 5.5 K / 1500 RPM CIRCULATION PUMPS 2 X 4.0 KW THE MAXIMUM EVAPORATION 1,797 L / S@ 4984.0 KW NOISE LEVEL AT FULL LOAD 61 DB(A) AT 15 METERS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-cap. max. 7200 pcs./h, \r\ndougweightrange approx..200 to 1500 g,\r\nrounding length approx. 7.400 mm\r\ncylinder + tracks are teflonised\r\ntracks are adjustable\r\nvariable speed, 4 fans, \r\n\r\ncategory: bakery machine\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new\r\n CAP. MAX. 7200 PCS./H, \R\NDOUGWEIGHTRANGE APPROX..200 TO 1500 G,\R\NROUNDING LENGTH APPROX. 7.400 MM\R\NCYLINDER + TRACKS ARE TEFLONISED\R\NTRACKS ARE ADJUSTABLE\R\NVARIABLE SPEED, 4 FANS, \R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-designed to meet all metals analysis requirements form routine use to metals research, the arl 4460 is the solution for ultimate analytical performance in varying laboratory conditions or in hostile environments.
ultimate detection limits, reproducibility and accuracy
speed, accuracy, stability, reliability
widest range of metals analysis
capability to identify and count inclusions and to calculate cleanness indexes
the ultimate in performance for spark emission metals analysis to allow rapid, reliable quality control of metals.

the arl 4460 is quite simply the best system for metals analysis produced to date. two important new capabilities have been added to thermo scientific well established spectrometer chassis: the patented current controlled source (ccs), which allows a faster attack on the sample and therefore permits faster analysis times and improved precision of analysis, and the time resolved spectroscopy (trs) system, which permits clearer differentiation between useful analytical signals and background, therefore allowing better limits of detection to be achieved. together, these capabilities substantially improve the performance of the oe technique and allow faster analyses (well inside one minute) and improved detection limits for trace analysis.

even more recently, a new sparkdat capability has been made available as an option on the arl 4460. this allows information to be gathered from the individual sparks and permits off-line investigation of DESIGNED TO MEET ALL METALS ANALYSIS REQUIREMENTS FORM ROUTINE USE TO METALS RESEARCH, THE ARL 4460 IS THE SOLUTION FOR ULTIMATE ANALYTICAL PERFORMANCE IN VARYING LABORATORY CONDITIONS OR IN HOSTILE ENVIRONMENTS. ULTIMATE DETECTION LIMITS, REPRODUCIBILITY AND ACCURACY SPEED, ACCURACY, STABILITY, RELIABILITY WIDEST RANGE OF METALS ANALYSIS CAPABILITY TO IDENTIFY AND COUNT INCLUSIONS AND TO CALCULATE CLEANNESS INDEXES THE ULTIMATE IN PERFORMANCE FOR SPARK EMISSION METALS ANALYSIS TO ALLOW RAPID, RELIABLE QUALITY CONTROL OF METALS. THE ARL 4460 IS QUITE SIMPLY THE BEST SYSTEM FOR METALS ANALYSIS PRODUCED TO DATE. TWO IMPORTANT NEW CAPABILITIES HAVE BEEN ADDED TO THERMO SCIENTIFIC WELL ESTABLISHED SPECTROMETER CHASSIS: THE PATENTED CURRENT CONTROLLED SOURCE (CCS), WHICH ALLOWS A FASTER ATTACK ON THE SAMPLE AND THEREFORE PERMITS FASTER ANALYSIS TIMES AND IMPROVED PRECISION OF ANALYSIS, AND THE TIME RESOLVED SPECTROSCOPY (TRS) SYSTEM, WHICH PERMITS CLEARER DIFFERENTIATION BETWEEN USEFUL ANALYTICAL SIGNALS AND BACKGROUND, THEREFORE ALLOWING BETTER LIMITS OF DETECTION TO BE ACHIEVED. TOGETHER, THESE CAPABILITIES SUBSTANTIALLY IMPROVE THE PERFORMANCE OF THE OE TECHNIQUE AND ALLOW FASTER ANALYSES (WELL INSIDE ONE MINUTE) AND IMPROVED DETECTION LIMITS FOR TRACE ANALYSIS. EVEN MORE RECENTLY, A NEW SPARKDAT CAPABILITY HAS BEEN MADE AVAILABLE AS AN OPTION ON THE ARL 4460. THIS ALLOWS INFORMATION TO BE GATHERED FROM THE INDIVIDUAL SPARKS AND PERMITS OFF-LINE INVESTIGATION OF "INCLUSIONS" IN METALS. SPECIFICATIONS SPECTROMETER DESIGN ONE METER, PASCHEN-RUNGE VACUUM POLYCHROMATOR MADE OF CAST IRON AND TEMPERATURE CONTROLLED TO ± 0.1° AT 38° C. MAXIMUM 60 CHANNELS. FJNSD9MTY SAMPLE STAND WITH SELF CONTAINED, RECIRCULATING COOLANT SYSTEM. ARGON FLUSHED TABLE. GRATINGS SPECTROMETER IS PROVIDED WITH ONE OF THE FOLLOWING GRATINGS, APPROPRIATELY CHOICEED FOR THE ANALYTICAL TASK: 1080 GR/MM, 1667 GR/MM, 2160 GR/MM. RESOLUTION DEPENDENT ON GRATING, SECONDARY SLIT, AND SPECTRAL ORDER. SLIT WIDTHS PRIMARY SLIT: 20 µM; SECONDARY SLIT: 25, 37.5, 50, 75 µM. PHOTOMULTIPLIER TUBES ø 28 MM, 10-STAGE SIDE WINDOW TUBES, FUSED QUARTZ OR GLASS ENVELOPE. CURRENT CONTROLLED SOURCE (CCS) AND TIME RESOLVED SPECTROSCOPY (TRS) TO EXTEND THE RANGE OF ANALYSIS CAPABILITIES. SPECTROMETER CONTROL ARL MMB 386 MICROPROCESSOR UTILIZING CMOS TECHNOLOGY WITH STATUS MEASURING CARD. A/D CONVERTERS AND ATTENUATORS INCLUDED FOR EACH CHANNEL. EACH ATTENUATOR HAS 41 STEPS. UP TO 12 PROGRAMMABLE ATTENUATORS ARE AVAILABLE AS AN OPTION. THE DYNAMIC RANGE OF THE MEASURING ELECTRONICS IS PROPORTIONAL TO THE MEASURING TIME, TYPICALLY 2*106 COUNTS/SEC. ANALYSIS TIME TYPICALLY LESS THAN 45 SECONDS (FOR 2 SPARKS) DEPENDING ON SAMPLE TYPE. ENVIRONMENTAL REQUIREMENTS AMBIENT TEMPERATURE 16-30° C (59-86° F); MAXIMUM RATE OF CHANGE ± 5°C/HOUR; RELATIVE HUMIDITY: 20-80%. ELECTRICAL REQUIREMENTS VOLTAGE 230 V + 10% - 15%, SINGLE-PHASE WITH PROTECTIVE GROUND (5 KVA REGULATOR REQUIRED IF FLUCTUATIONS EXCEED ± 10%). CURRENT 12A, FREQUENCY 50 OR 60 HZ; POWER 2.5 KVA; GROUNDING < 1½. IN CONFORMITY TO EUROPEAN DIRECTIVES (89/392/EEC MACHINERY), (73/23/EEC LOW VOLTAGE MATERIAL), (89/336/EEC ELECTROMAGNETIC COMPATIBILITY). ARGON REQUIREMENTS 99.995% MAXIMUM 5 PPM OXYGEN (MAXIMUM 2 PPM OXYGEN FOR SAMPLES WITH HIGH SI CONTENT). OPTIONAL ARGON PURIFIER AVAILABLE AND RECOMMENDED FOR LOW CARBON ANALYSIS. FOR NITROGEN, ARGON PURIFIER INCLUDED. FLOW: 5 L/MIN. DURING ANALYSIS; 0,7 L/MIN. STAND-BY. ENCLOSURE BUILT-IN DUST PROTECTION WITH HIGH CAPACITY COOLING FANS. DIMENSIONS 1385 MM (55 IN.) WIDE EXCLUDING EXCITATION STAND. 1690 MM (67 IN.) WIDE INCLUDING EXCITATION STAND. 1220 MM (48 IN.) HIGH, 855 MM (34 IN.) DEEP. TOTAL SYSTEM WEIGHT 520 KG (1058 LB) APPROXIMATELY. ACCESSORIES AND OPTIONS HOLDERS/ADAPTERS FOR SMALL AND PIN SAMPLES. CASTING MOLDS FOR FERROUS AND NON-FERROUS METALS. SAMPLE PREPARATION MACHINES FOR FERROUS AND NON-FERROUS METALS. ARGON PURIFICATION SYSTEMS. GAS DISTRIBUTION SYSTEM FOR BOTTLED ARGON. VOLTAGE STABILIZATION SYSTEMS. WINDOW MOUNTED LABORATORY AIR-CONDITIONERS.
Vendedor: Truck Outlet LTD
Año de construcción: usado
Ubicación: Land-2 fans ensure a uniform climate\r\ncapacity sufficient for a proofing-chamber max. 12 m³\r\nsteamer 400 v, 3 kw\r\nheating  400 v, 1,5 kw\r\ntotal electrical power:  4,5 kw / 400 v /\r\nheating temp. + air moisture adjustable\r\n\r\ncategory: bakery machine\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new\r\n 2 FANS ENSURE A UNIFORM CLIMATE\R\NCAPACITY SUFFICIENT FOR A PROOFING-CHAMBER MAX. 12 M³\R\NSTEAMER 400 V, 3 KW\R\NHEATING 400 V, 1,5 KW\R\NTOTAL ELECTRICAL POWER: 4,5 KW / 400 V /\R\NHEATING TEMP. + AIR MOISTURE ADJUSTABLE\R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
offer.: nr. 1117
pallet dryer superfici model: etc2 150 6500 

description:
- length 7800 mm
- width 4400 mm
- height 4500 mm (+ 600 mm space for inspections)
- working width 1300 mm
- belt webbing
- usable width range 1300mm
- usable length of the pallet 6200mm
- number of pallets 48 pcs.
- max. maxload palette 120 kg
- input and output speed 2,5 - 16 m/min
- pallet vertical clearance 150mm
- spacing of pallets 88 mm
- max. thickness of elements 60 mm

evaporation
air throughput in 2500 m³ / h (100% eliminated)

drying
axial fans for air circulation 2 and OFFER.: NR. 1117 PALLET DRYER SUPERFICI MODEL: ETC2 150 6500 DESCRIPTION: - LENGTH 7800 MM - WIDTH 4400 MM - HEIGHT 4500 MM (+ 600 MM SPACE FOR INSPECTIONS) - WORKING WIDTH 1300 MM - BELT WEBBING - USABLE WIDTH RANGE 1300MM - USABLE LENGTH OF THE PALLET 6200MM - NUMBER OF PALLETS 48 PCS. - MAX. MAXLOAD PALETTE 120 KG - INPUT AND OUTPUT SPEED 2,5 - 16 M/MIN - PALLET VERTICAL CLEARANCE 150MM - SPACING OF PALLETS 88 MM - MAX. THICKNESS OF ELEMENTS 60 MM EVAPORATION AIR THROUGHPUT IN 2500 M³ / H (100% ELIMINATED) DRYING AXIAL FANS FOR AIR CIRCULATION 2 AND "FRESH" BANDWIDTH 3500 M³ / H OF AIR CIRCULATING THROUGHPUT 500 M³ / H OF FRESH AIR HEATING DEVICE 2 WITH AUTOMATIC TEMPERATURE CONTROL HEATING EFFICIENCY OF 2 X 72,000 KCAL / H COOLING AXIAL FANS 2 SUPPLY FAN 1 AND RECIRCULATED AIR FROM A FAN COOLING AIR THROUGHPUT 4500 M³ / H EXHAUST AIR FLOW RATE IS 2000 M³ / H INSTALED 18.8 KW ELECTRICAL POWER HEATING INSTALED 144 000 KCAL / H COMPRESSED AIR CONSUMPTION 100 NL MIN / EJECTED TO THE OUTSIDE AIR 3000 M³ / H SUPPLY AIR FROM THE ROOM 500 M³ / H (SUBJECT TO ERRORS, TECHNICAL MODIFICATIONS AND PRIOR SALE)
Vendedor: Iberus Woodworking Machinery
Año de construcción: usado
Precio: used machinery auction RESALE 260 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1400 x 1200 x 1050 mm<br/>description: ? lot of 3 axial extraction fans<br> ? dimensions of each fan 1400 x 1050 x 400 mm<br> ? motor power 3 kw each<br> ? fan diameter approx. 900 mm WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1200 X 1050 MM
DESCRIPTION: ? LOT OF 3 AXIAL EXTRACTION FANS
? DIMENSIONS OF EACH FAN 1400 X 1050 X 400 MM
? MOTOR POWER 3 KW EACH
? FAN DIAMETER APPROX. 900 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cabero gc/dnd / 099kq-2x6 v-block (2 pcs cooling circuit)
medium: water glycol 70 / 30%
medium temperature: 90⺠occurs c.austritt 70 âºc.
cooling capacity: 2000kw air temperature: 30 â° c. (entrance)
fans: 12 pieces, 2, 4kw, 400v, 50 hz, 3 wire
exchange area: 3050 m 2
connection: entrance 2xdn100, exit 2xdn100
dimensions: lxwxh = 8500x2350x2660mm
weight: 3600kg
sound pressure level: 58 db(a) 10 m distance, year of manufacture: 2009
condition: good, slats ok, tightness and MANUFACTURER: CABERO GC/DND / 099KQ-2X6 V-BLOCK (2 PCS COOLING CIRCUIT) MEDIUM: WATER GLYCOL 70 / 30% MEDIUM TEMPERATURE: 90&ACIRC;&ORDM; OCCURS C.AUSTRITT 70 &ACIRC;&ORDM;C. COOLING CAPACITY: 2000KW AIR TEMPERATURE: 30 &ACIRC;&DEG; C. (ENTRANCE) FANS: 12 PIECES, 2, 4KW, 400V, 50 HZ, 3 WIRE EXCHANGE AREA: 3050 M 2 CONNECTION: ENTRANCE 2XDN100, EXIT 2XDN100 DIMENSIONS: LXWXH = 8500X2350X2660MM WEIGHT: 3600KG SOUND PRESSURE LEVEL: 58 DB(A) 10 M DISTANCE, YEAR OF MANUFACTURE: 2009 CONDITION: GOOD, SLATS OK, TIGHTNESS AND
Vendedor: MACOGEN
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 960 mm<br/>description: ? lot of axial extraction fans<br> ? motor power 0.55 kw-1400 rpm<br> ? fan diameter approx. 550 mm WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 960 MM
DESCRIPTION: ? LOT OF AXIAL EXTRACTION FANS
? MOTOR POWER 0.55 KW-1400 RPM
? FAN DIAMETER APPROX. 550 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cabero gc/dnd / 099kq-2x6 v-block
medium: water glycol 70 / 30%
medium temperature: occurs 45 â° c.austritt 35 â° c.
cooling capacity: 700kw air temperature: 30 â° c. (entrance)
fans: 12 pieces, 2, 4kw, 400v, 50 hz, 3 wire
exchange area: 3050 m 2
connection: entrance 2xdn100, exit 2xdn100
dimensions: lxwxh = 8500x2350x2660mm
weight: 3600kg
sound pressure level: 58 db(a) 10 m distance, year of manufacture: 2009
condition: good, blades do, tightness and fans checked 
 MANUFACTURER: CABERO GC/DND / 099KQ-2X6 V-BLOCK MEDIUM: WATER GLYCOL 70 / 30% MEDIUM TEMPERATURE: OCCURS 45 &ACIRC;&DEG; C.AUSTRITT 35 &ACIRC;&DEG; C. COOLING CAPACITY: 700KW AIR TEMPERATURE: 30 &ACIRC;&DEG; C. (ENTRANCE) FANS: 12 PIECES, 2, 4KW, 400V, 50 HZ, 3 WIRE EXCHANGE AREA: 3050 M 2 CONNECTION: ENTRANCE 2XDN100, EXIT 2XDN100 DIMENSIONS: LXWXH = 8500X2350X2660MM WEIGHT: 3600KG SOUND PRESSURE LEVEL: 58 DB(A) 10 M DISTANCE, YEAR OF MANUFACTURE: 2009 CONDITION: GOOD, BLADES DO, TIGHTNESS AND FANS CHECKED
Vendedor: MACOGEN
Año de construcción: usado
Precio: used machinery auction RESALE 69.000 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 20000 x 4500 x 3300 mm<br/>description: rarely used and young cefla painting line consisting of the following components:<br> <br> <b>belt conveyor tb3500</b><br> with dust extraction unit. feed speed stepless 2,2 - 20 m/min, cap-hood with fan units and anti-static linear brush made from carbon.<br> <br> <b>spraying machine with 1 axis, typ mito k</b><br> 1-arm spraying machine with dry filtering and paper conveyor. central axis wth 4 spraying heads. max. speed of spraying unit 140 m/min. scanner with 135 photodiodes for scanning the shape and position of workpiece. minimum length of workpiece 250 mm. feed speed stepless 1 - 6 m/min. plc control with 7,5 touch screen, ethernet and usb connections.<br> <br> <b>2k paintsupply unit wagner</b><br> with 4 paint pumps wagner leopard and wagner flexcontrol smart control system<br> <br> <b>2 drying tunnels, type fev e/eu</b><br> length of tunnels each approx. 4500 mm, max. height of work piece 130 mm, feed speed max. 20 m/min. with heating units and ehaust fans. connective power 18,5 and 22,8 kw.<br> <br> <b>roller conveyor type tr2500</b><br> conveying length approx. 2500 mm, feed speed 2,2 - 20 m/min.<br> <br> <b>new price of the entire line approx. 250.000 euro</b><br> <br> for further technical details please see pdf-files. WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 20000 X 4500 X 3300 MM
DESCRIPTION: RARELY USED AND YOUNG CEFLA PAINTING LINE CONSISTING OF THE FOLLOWING COMPONENTS:

BELT CONVEYOR TB3500
WITH DUST EXTRACTION UNIT. FEED SPEED STEPLESS 2,2 - 20 M/MIN, CAP-HOOD WITH FAN UNITS AND ANTI-STATIC LINEAR BRUSH MADE FROM CARBON.

SPRAYING MACHINE WITH 1 AXIS, TYP MITO K
1-ARM SPRAYING MACHINE WITH DRY FILTERING AND PAPER CONVEYOR. CENTRAL AXIS WTH 4 SPRAYING HEADS. MAX. SPEED OF SPRAYING UNIT 140 M/MIN. SCANNER WITH 135 PHOTODIODES FOR SCANNING THE SHAPE AND POSITION OF WORKPIECE. MINIMUM LENGTH OF WORKPIECE 250 MM. FEED SPEED STEPLESS 1 - 6 M/MIN. PLC CONTROL WITH 7,5 TOUCH SCREEN, ETHERNET AND USB CONNECTIONS.

2K PAINTSUPPLY UNIT WAGNER
WITH 4 PAINT PUMPS WAGNER LEOPARD AND WAGNER FLEXCONTROL SMART CONTROL SYSTEM

2 DRYING TUNNELS, TYPE FEV E/EU
LENGTH OF TUNNELS EACH APPROX. 4500 MM, MAX. HEIGHT OF WORK PIECE 130 MM, FEED SPEED MAX. 20 M/MIN. WITH HEATING UNITS AND EHAUST FANS. CONNECTIVE POWER 18,5 AND 22,8 KW.

ROLLER CONVEYOR TYPE TR2500
CONVEYING LENGTH APPROX. 2500 MM, FEED SPEED 2,2 - 20 M/MIN.

NEW PRICE OF THE ENTIRE LINE APPROX. 250.000 EURO

FOR FURTHER TECHNICAL DETAILS PLEASE SEE PDF-FILES.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: gea kã?ba
medium: water glycol 70 / 30%
medium temperature: 90⺠occurs c.austritt 70 âºc.
cooling capacity: 525kw air temperature: 30 â° c. (entrance)
fans: 2 piece, 2 kw, 400v, 50 hz, 3 wire
connection: entrance 1xdn60, exit 1xdn60
dimensions: lxwxh = 4330x1635x2060mm
weight: 800kg
sound pressure level: 63 db(a) 10 m distance, year: 2013
condition: very good, check tightness and fans.
                 MANUFACTURER: GEA K&ATILDE;?BA MEDIUM: WATER GLYCOL 70 / 30% MEDIUM TEMPERATURE: 90&ACIRC;&ORDM; OCCURS C.AUSTRITT 70 &ACIRC;&ORDM;C. COOLING CAPACITY: 525KW AIR TEMPERATURE: 30 &ACIRC;&DEG; C. (ENTRANCE) FANS: 2 PIECE, 2 KW, 400V, 50 HZ, 3 WIRE CONNECTION: ENTRANCE 1XDN60, EXIT 1XDN60 DIMENSIONS: LXWXH = 4330X1635X2060MM WEIGHT: 800KG SOUND PRESSURE LEVEL: 63 DB(A) 10 M DISTANCE, YEAR: 2013 CONDITION: VERY GOOD, CHECK TIGHTNESS AND FANS.
Vendedor: MACOGEN
Año de construcción: usado
Precio: used machinery auction RESALE 7.500 €
Ubicación: Land-stork freezing belt, type: 3l40, year of construction: 2006, plastic belt, belt width: 1550 mm, dimensions: 13000 mm x 1820 mm x 1300 mm, frigerest evaporator, type: apie 4030, 400 v, 50 hz, 750 w, 3 fans, dimensions 2800 mm x 850 mm x 1160 mm, (2x) cryokit cooling compressors, type: 3026/groupe de, fabric number: 07-223-03, 07-223-02, year of construction: 1997, refrigerant: r404a, dimensions: 1500 mm x 1000 mm x 1230 mm, STORK FREEZING BELT, TYPE: 3L40, YEAR OF CONSTRUCTION: 2006, PLASTIC BELT, BELT WIDTH: 1550 MM, DIMENSIONS: 13000 MM X 1820 MM X 1300 MM, FRIGEREST EVAPORATOR, TYPE: APIE 4030, 400 V, 50 HZ, 750 W, 3 FANS, DIMENSIONS 2800 MM X 850 MM X 1160 MM, (2X) CRYOKIT COOLING COMPRESSORS, TYPE: 3026/GROUPE DE, FABRIC NUMBER: 07-223-03, 07-223-02, YEAR OF CONSTRUCTION: 1997, REFRIGERANT: R404A, DIMENSIONS: 1500 MM X 1000 MM X 1230 MM,
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-wesper slh 1902 ln

product number:m19-4337
cooling capacity:384,1 kw
number of fans:8
refrigerant:r407c
refrigerant content:67 + 67 kg
voltage:400 volt
power consumption:203 (max) kw
dimensions:4050 x 2200 x 2550 mm
weight:4510 kg
year:2007
number in stock:1 piece(s)
price:quotation request

very nice wesper (airwell) water chiller/heat pump with 2 screw compressors and 2 water pumps distributed over two circuits. mentioned capacity at water temperature of +12/7°c (inlet/outlet) and an ambient temperature of +35°c. heating capacity: q= 427,7kw at a water outlet temperature of +45°c and an ambint temperature of +7°c.

please also visit our website: used-refrigeration WESPER SLH 1902 LN PRODUCT NUMBER:M19-4337 COOLING CAPACITY:384,1 KW NUMBER OF FANS:8 REFRIGERANT:R407C REFRIGERANT CONTENT:67 + 67 KG VOLTAGE:400 VOLT POWER CONSUMPTION:203 (MAX) KW DIMENSIONS:4050 X 2200 X 2550 MM WEIGHT:4510 KG YEAR:2007 NUMBER IN STOCK:1 PIECE(S) PRICE:QUOTATION REQUEST VERY NICE WESPER (AIRWELL) WATER CHILLER/HEAT PUMP WITH 2 SCREW COMPRESSORS AND 2 WATER PUMPS DISTRIBUTED OVER TWO CIRCUITS. MENTIONED CAPACITY AT WATER TEMPERATURE OF +12/7°C (INLET/OUTLET) AND AN AMBIENT TEMPERATURE OF +35°C. HEATING CAPACITY: Q= 427,7KW AT A WATER OUTLET TEMPERATURE OF +45°C AND AN AMBINT TEMPERATURE OF +7°C. PLEASE ALSO VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-aytek cooling systems water chiller, type: protech ptc 160, serial number: 30715, year of construction: 2015, 380-400 v, 3 ph, 50 hz, 134,4 a, 48 kw, refrigerant: r407c, weight: 1750 kg, 2 fans, total dimensions: 2500 mm x 1600 mm x 2500 mm, AYTEK COOLING SYSTEMS WATER CHILLER, TYPE: PROTECH PTC 160, SERIAL NUMBER: 30715, YEAR OF CONSTRUCTION: 2015, 380-400 V, 3 PH, 50 HZ, 134,4 A, 48 KW, REFRIGERANT: R407C, WEIGHT: 1750 KG, 2 FANS, TOTAL DIMENSIONS: 2500 MM X 1600 MM X 2500 MM,
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 1.590 €
Ubicación: Land-exhaust fan

tube 㸠350 mm
fan 㸠Ⱡ750 mm
engine 11 kw
built in 1995
weight approx. 190 kg
l x w x h: 100 x 80 x 100 cm

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12       






 EXHAUST FAN TUBE &ATILDE;&CEDIL; 350 MM FAN &ATILDE;&CEDIL; &ACIRC;&PLUSMN; 750 MM ENGINE 11 KW BUILT IN 1995 WEIGHT APPROX. 190 KG L X W X H: 100 X 80 X 100 CM THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-serial no.: q77/0014 <br/>voltage: 400 v<br/>electric capacity: 11,8 kva<br/>frequency: 50 hz<br/>current: 20 a<br/>dimensions of press (l x w x h): 120 x 60 x 190 cm<br/>cooling system with control station and compressor<br/>compressor: lu-ve / type shln134bh / 2 fans / l360xw110xh170 cm / vol. 33 dm³ / 1,2 mpa max. working press / 50 hz / 8,30 w / 3,7 a / 400 v<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> SERIAL NO.: Q77/0014
VOLTAGE: 400 V
ELECTRIC CAPACITY: 11,8 KVA
FREQUENCY: 50 HZ
CURRENT: 20 A
DIMENSIONS OF PRESS (L X W X H): 120 X 60 X 190 CM
COOLING SYSTEM WITH CONTROL STATION AND COMPRESSOR
COMPRESSOR: LU-VE / TYPE SHLN134BH / 2 FANS / L360XW110XH170 CM / VOL. 33 DM³ / 1,2 MPA MAX. WORKING PRESS / 50 HZ / 8,30 W / 3,7 A / 400 V


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: Steenholdt GmbH
Año de construcción: usado
Ubicación: Land-brand: liebert hiross
power: 1068 kw
type: with free cooling
year of manufacture: 2006
refrigerant circuit: 2 pieces
type of refrigerant: r407?
compressors: 4 pcs. bitzer(screw)
number of fans: 20 pcs.
dimensions: 13,3 ? 2,3 ? 2,3 m.
weight: 13187 kg.
?ondition : this chiller is in good condition
 BRAND: LIEBERT HIROSS POWER: 1068 KW TYPE: WITH FREE COOLING YEAR OF MANUFACTURE: 2006 REFRIGERANT CIRCUIT: 2 PIECES TYPE OF REFRIGERANT: R407? COMPRESSORS: 4 PCS. BITZER(SCREW) NUMBER OF FANS: 20 PCS. DIMENSIONS: 13,3 ? 2,3 ? 2,3 M. WEIGHT: 13187 KG. ?ONDITION : THIS CHILLER IS IN GOOD CONDITION
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Ubicación: Land-machine measurements: 8.000 mm<br/>machine weight: 9.800 kg<br/>power capacity: 17,5 kw<br/>condition:            used<br/><br/>specification:        batch-off plant ? used<br/><br/>- max. width rubber sheet:        600 mm<br/>- thickness rubber sheet:         4 ? 10 mm<br/>- distance between banging bars:  effective 140 mm<br/>- max. pendant length hanging sheet: 3600 mm<br/>- take-off linear speed:          4 ? 35 m/min. <br/>  frequency control of motor speed<br/>linear speed: <br/>- swinging:                       0 ? 40 m/min.<br/>- hinging:                        0 ? 1,55 m/min.<br/>- no. of cooling fans:            10 set<br/>- power cooling fans:             0,75 kw/set<br/>- total length of line:           8.000 mm<br/>- total power:                    17,5 kw<br/>- final temperature sheet:        room temperature +5°c<br/>- compressed air pressure:        0,4 ? 0,6 mpa<br/>- cross and longitudinal cutter, wig-wag packer for pallets<br/>- total weight:                   ca. 9800 kg<br/><br/>            stuctural features:<br/><br/>1. take-off device is off the ring type conveyor belt with guide strip<br/>   and without any union or joint, and equips with printer. take-off <br/>   conveyor belt, lifting and dip-in wire mesh belt all share one same<br/>   frequency conversion ac speed regulating motor, which the conveying<br/>   speed could be adjustable.<br/><br/>2. lifting bar is driven by one set cycloid pin wheel speed reducer through<br/>   ac frequency conversion and the bar speed is synchronous as the speed of<br/>   lifting device.<br/><br/>3. the sheet is uniformly coated with the lubricator by dipping without<br/>   polluting the environment. its cooling effect is better than the spraying.<br/><br/>4. the hanging up area is fully closed, which adopts the blower to blow<br/>   the sheet at a slant. so it improves the air flowing direction and<br/>   cooling effect.<br/><br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> MACHINE MEASUREMENTS: 8.000 MM
MACHINE WEIGHT: 9.800 KG
POWER CAPACITY: 17,5 KW
CONDITION: USED

SPECIFICATION: BATCH-OFF PLANT ? USED

- MAX. WIDTH RUBBER SHEET: 600 MM
- THICKNESS RUBBER SHEET: 4 ? 10 MM
- DISTANCE BETWEEN BANGING BARS: EFFECTIVE 140 MM
- MAX. PENDANT LENGTH HANGING SHEET: 3600 MM
- TAKE-OFF LINEAR SPEED: 4 ? 35 M/MIN.
FREQUENCY CONTROL OF MOTOR SPEED
LINEAR SPEED:
- SWINGING: 0 ? 40 M/MIN.
- HINGING: 0 ? 1,55 M/MIN.
- NO. OF COOLING FANS: 10 SET
- POWER COOLING FANS: 0,75 KW/SET
- TOTAL LENGTH OF LINE: 8.000 MM
- TOTAL POWER: 17,5 KW
- FINAL TEMPERATURE SHEET: ROOM TEMPERATURE +5°C
- COMPRESSED AIR PRESSURE: 0,4 ? 0,6 MPA
- CROSS AND LONGITUDINAL CUTTER, WIG-WAG PACKER FOR PALLETS
- TOTAL WEIGHT: CA. 9800 KG

STUCTURAL FEATURES:

1. TAKE-OFF DEVICE IS OFF THE RING TYPE CONVEYOR BELT WITH GUIDE STRIP
AND WITHOUT ANY UNION OR JOINT, AND EQUIPS WITH PRINTER. TAKE-OFF
CONVEYOR BELT, LIFTING AND DIP-IN WIRE MESH BELT ALL SHARE ONE SAME
FREQUENCY CONVERSION AC SPEED REGULATING MOTOR, WHICH THE CONVEYING
SPEED COULD BE ADJUSTABLE.

2. LIFTING BAR IS DRIVEN BY ONE SET CYCLOID PIN WHEEL SPEED REDUCER THROUGH
AC FREQUENCY CONVERSION AND THE BAR SPEED IS SYNCHRONOUS AS THE SPEED OF
LIFTING DEVICE.

3. THE SHEET IS UNIFORMLY COATED WITH THE LUBRICATOR BY DIPPING WITHOUT
POLLUTING THE ENVIRONMENT. ITS COOLING EFFECT IS BETTER THAN THE SPRAYING.

4. THE HANGING UP AREA IS FULLY CLOSED, WHICH ADOPTS THE BLOWER TO BLOW
THE SHEET AT A SLANT. SO IT IMPROVES THE AIR FLOWING DIRECTION AND
COOLING EFFECT.



THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: MEB Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-
brand: trane
power: 526 kw
year of manufacture: 2000
refrigerant circuit: 2 pieces
type of refrigerant: r404a
compressors: 2 pcs. trane (screw)
number of fans: 10 pcs.
dimensions: 5,8 ? 2,1 ? 2,2 m.
weight: 4670 kg.
?ondition: this chiller is in a perfect condition

do not hesitate to contact us.    BRAND: TRANE POWER: 526 KW YEAR OF MANUFACTURE: 2000 REFRIGERANT CIRCUIT: 2 PIECES TYPE OF REFRIGERANT: R404A COMPRESSORS: 2 PCS. TRANE (SCREW) NUMBER OF FANS: 10 PCS. DIMENSIONS: 5,8 ? 2,1 ? 2,2 M. WEIGHT: 4670 KG. ?ONDITION: THIS CHILLER IS IN A PERFECT CONDITION DO NOT HESITATE TO CONTACT US.
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Ubicación: Land-capacity: 30000  m³/h      <br />weight: 5000  kg<br />equipment: 2 fans, supply air, exhaust, 2 engines for fans, supply air, exhaust, 2 wrg plate heat exchanger with internal bypass, outside air, exhaust air, 1 reheater, 3 bag filters <br /> CAPACITY: 30000 M³/H
WEIGHT: 5000 KG
EQUIPMENT: 2 FANS, SUPPLY AIR, EXHAUST, 2 ENGINES FOR FANS, SUPPLY AIR, EXHAUST, 2 WRG PLATE HEAT EXCHANGER WITH INTERNAL BYPASS, OUTSIDE AIR, EXHAUST AIR, 1 REHEATER, 3 BAG FILTERS
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-cooling tower 1410 kw evapco model-at-215-59

this evaporative cooling station evapko was made in 2011 year by evapco company. 
it has two fans for water cooler and it is designed to operate together with york gram ammonia station, cooling the entire york compressor station equipment. equipment is in perfect working condition and still installed on the roof of the building. have all needed certificates and iso document’s.  

short description and working principals: 
warm water from the heat source is pumped to the water distribution system at the top of the tower. the water is distributed over the wet deck fill by means of large orifice evapjet™ nozzles. simultaneously, air is drawn in through the air inlet louvers at the base of the tower and travels upward through the wet deck fill opposite the water flow. a small portion of the water is evaporated which removes the heat from the remaining water. the warm moist air is drawn to the top of the cooling tower by the fan and discharged to the atmosphere. the cooled water drains to the basin at the bottom of the tower and is returned to the heat source. the vertical air discharge of the at design and the distance between the discharge air and fresh air intakes reduces the chance of air recirculation since the warm humid air is directed up and away from the unit.

manufacturer:                         evapco europe nv
manufacturer’s type:             at-215-59 
manufacturing year:               2011 
capacity rt’s                         314 tons 
capacity (kw)                         1410 kw 
fluid type:                               water 
flow (lps)                             55 liters/ sec. 
entering fluid temp:              32 °c
leaving fluid temp:               26 °c
wet bulb:                                21°c
fans:                                        2 fans 
fan motor:                              2x5,50 kw
air flow:                                 33,1 m3/s 
inlet pressure drop:                 18,1 kpa
weight:                                   5188 kg 
length:                                    2578 mm
width:                                     4696 mm
height:                                    3766 mm
  COOLING TOWER 1410 KW EVAPCO MODEL-AT-215-59 THIS EVAPORATIVE COOLING STATION EVAPKO WAS MADE IN 2011 YEAR BY EVAPCO COMPANY. IT HAS TWO FANS FOR WATER COOLER AND IT IS DESIGNED TO OPERATE TOGETHER WITH YORK GRAM AMMONIA STATION, COOLING THE ENTIRE YORK COMPRESSOR STATION EQUIPMENT. EQUIPMENT IS IN PERFECT WORKING CONDITION AND STILL INSTALLED ON THE ROOF OF THE BUILDING. HAVE ALL NEEDED CERTIFICATES AND ISO DOCUMENT’S. SHORT DESCRIPTION AND WORKING PRINCIPALS: WARM WATER FROM THE HEAT SOURCE IS PUMPED TO THE WATER DISTRIBUTION SYSTEM AT THE TOP OF THE TOWER. THE WATER IS DISTRIBUTED OVER THE WET DECK FILL BY MEANS OF LARGE ORIFICE EVAPJET™ NOZZLES. SIMULTANEOUSLY, AIR IS DRAWN IN THROUGH THE AIR INLET LOUVERS AT THE BASE OF THE TOWER AND TRAVELS UPWARD THROUGH THE WET DECK FILL OPPOSITE THE WATER FLOW. A SMALL PORTION OF THE WATER IS EVAPORATED WHICH REMOVES THE HEAT FROM THE REMAINING WATER. THE WARM MOIST AIR IS DRAWN TO THE TOP OF THE COOLING TOWER BY THE FAN AND DISCHARGED TO THE ATMOSPHERE. THE COOLED WATER DRAINS TO THE BASIN AT THE BOTTOM OF THE TOWER AND IS RETURNED TO THE HEAT SOURCE. THE VERTICAL AIR DISCHARGE OF THE AT DESIGN AND THE DISTANCE BETWEEN THE DISCHARGE AIR AND FRESH AIR INTAKES REDUCES THE CHANCE OF AIR RECIRCULATION SINCE THE WARM HUMID AIR IS DIRECTED UP AND AWAY FROM THE UNIT. MANUFACTURER: EVAPCO EUROPE NV MANUFACTURER’S TYPE: AT-215-59 MANUFACTURING YEAR: 2011 CAPACITY RT’S 314 TONS CAPACITY (KW) 1410 KW FLUID TYPE: WATER FLOW (LPS) 55 LITERS/ SEC. ENTERING FLUID TEMP: 32 °C LEAVING FLUID TEMP: 26 °C WET BULB: 21°C FANS: 2 FANS FAN MOTOR: 2X5,50 KW AIR FLOW: 33,1 M3/S INLET PRESSURE DROP: 18,1 KPA WEIGHT: 5188 KG LENGTH: 2578 MM WIDTH: 4696 MM HEIGHT: 3766 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-this listing is for 1 of 2 2004 emicon compact air cooled chiller with screw compressor and axial fans.
lp 16.0 bar hp 30.0 bar
12,200 kg THIS LISTING IS FOR 1 OF 2 2004 EMICON COMPACT AIR COOLED CHILLER WITH SCREW COMPRESSOR AND AXIAL FANS. LP 16.0 BAR HP 30.0 BAR 12,200 KG
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-general data name: drying plant for wood chips, chip dryer, low temperature dryer, wood chip dryer manufacturer: mothermik, de year: 2004 type: hack pulp dryer, low temperature dryer drying product:  wood chips from timber, g30, g40 state: technical data of the dryer are used, connected and ready for use the following data according to the operator's report listed: moisture content of raw product: 60-70%
residual moisture of finished product: 10-15%
heat transfer medium: water
flow temperature 90 â° c temperature: 60 â° c heat demand: 750 kw
heat exchanger: 4 pieces
fans: 6 pieces
hydraulick station 1 piece
	
performance crude at about 60% water content: ca. 19 t / 24 hours
performance of finished product with 10-15% moisture content: approx. 70-90 srm or 11 tonnes / 24 hours
	
drying temperature: 90 â° c.
installed electrical power: 14.5 kw
dryer width: 2.7 m
overall length: ca. 19 m
total width: 7,3 m
exhaust tube height: 8 m
	
all information without guarantee price on request	
 GENERAL DATA NAME: DRYING PLANT FOR WOOD CHIPS, CHIP DRYER, LOW TEMPERATURE DRYER, WOOD CHIP DRYER MANUFACTURER: MOTHERMIK, DE YEAR: 2004 TYPE: HACK PULP DRYER, LOW TEMPERATURE DRYER DRYING PRODUCT: WOOD CHIPS FROM TIMBER, G30, G40 STATE: TECHNICAL DATA OF THE DRYER ARE USED, CONNECTED AND READY FOR USE THE FOLLOWING DATA ACCORDING TO THE OPERATOR'S REPORT LISTED: MOISTURE CONTENT OF RAW PRODUCT: 60-70% RESIDUAL MOISTURE OF FINISHED PRODUCT: 10-15% HEAT TRANSFER MEDIUM: WATER FLOW TEMPERATURE 90 &ACIRC;&DEG; C TEMPERATURE: 60 &ACIRC;&DEG; C HEAT DEMAND: 750 KW HEAT EXCHANGER: 4 PIECES FANS: 6 PIECES HYDRAULICK STATION 1 PIECE PERFORMANCE CRUDE AT ABOUT 60% WATER CONTENT: CA. 19 T / 24 HOURS PERFORMANCE OF FINISHED PRODUCT WITH 10-15% MOISTURE CONTENT: APPROX. 70-90 SRM OR 11 TONNES / 24 HOURS DRYING TEMPERATURE: 90 &ACIRC;&DEG; C. INSTALLED ELECTRICAL POWER: 14.5 KW DRYER WIDTH: 2.7 M OVERALL LENGTH: CA. 19 M TOTAL WIDTH: 7,3 M EXHAUST TUBE HEIGHT: 8 M ALL INFORMATION WITHOUT GUARANTEE PRICE ON REQUEST
Vendedor: SN-InTec Ltd.& CO.KG
Año de construcción: usado
Ubicación: Land-this listing is for 1 of 6 2004 emicon air cooled condencing units with 4 scroll compressors and centrifugal fans.
lp 16.0 bar hp 30.0 bar
1492 kg THIS LISTING IS FOR 1 OF 6 2004 EMICON AIR COOLED CONDENCING UNITS WITH 4 SCROLL COMPRESSORS AND CENTRIFUGAL FANS. LP 16.0 BAR HP 30.0 BAR 1492 KG
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-data:

-dimensions: 1350 x 1100 x 700 mm
-41 compartments per car
-with 2 swivel casters and 2 fixed rollers
-12 pieces available

price per piece: â?¬200 DATA: -DIMENSIONS: 1350 X 1100 X 700 MM -41 COMPARTMENTS PER CAR -WITH 2 SWIVEL CASTERS AND 2 FIXED ROLLERS -12 PIECES AVAILABLE PRICE PER PIECE: &ACIRC;?&NOT;200
Vendedor: Mirrotech Glas & Spiegel GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: höcker , type: lackstaubfilter, year: 2014, filter system - negative pressure: yes, volume flow rate m³/h: 17500, hose diameter in mm!: 200, number of filter filter gallerys: 1, return air capable: no, cleaning of scavenging air: yes, electronic control board: yes, number of fans: 1, fans frequency-controlled: yes, 2nd exhaust fan kw: 17,5, free text: inkl. feuerlöschanlage mit seaparater steuerung, year :2014 MANUFACTURER: HöCKER , TYPE: LACKSTAUBFILTER, YEAR: 2014, FILTER SYSTEM - NEGATIVE PRESSURE: YES, VOLUME FLOW RATE M&SUP3;/H: 17500, HOSE DIAMETER IN MM!: 200, NUMBER OF FILTER FILTER GALLERYS: 1, RETURN AIR CAPABLE: NO, CLEANING OF SCAVENGING AIR: YES, ELECTRONIC CONTROL BOARD: YES, NUMBER OF FANS: 1, FANS FREQUENCY-CONTROLLED: YES, 2ND EXHAUST FAN KW: 17,5, FREE TEXT: INKL. FEUERLöSCHANLAGE MIT SEAPARATER STEUERUNG, YEAR :2014
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-helpman thor-a 524-7
product number: m19-2276
cooling capacity: 21.9 kw
number of fans: 2
lamella distance: 7 mm
defrost: glycol
refrigerant: co2/r744
rated voltage: 400 volt
engine power: 2 x 3.2 kw
dimensions: 2550 x 1200 x 1100 mm
weight: 255 kg
year of construction: 2009
units in stock: 8 piece (s)
price: request a quote

very neat helpman co2 evaporator with 2 ec fans and glycol defrosting circuit. listed capacity in an evaporation temperature of-4 ° c and 6 k. HELPMAN THOR-A 524-7 PRODUCT NUMBER: M19-2276 COOLING CAPACITY: 21.9 KW NUMBER OF FANS: 2 LAMELLA DISTANCE: 7 MM DEFROST: GLYCOL REFRIGERANT: CO2/R744 RATED VOLTAGE: 400 VOLT ENGINE POWER: 2 X 3.2 KW DIMENSIONS: 2550 X 1200 X 1100 MM WEIGHT: 255 KG YEAR OF CONSTRUCTION: 2009 UNITS IN STOCK: 8 PIECE (S) PRICE: REQUEST A QUOTE VERY NEAT HELPMAN CO2 EVAPORATOR WITH 2 EC FANS AND GLYCOL DEFROSTING CIRCUIT. LISTED CAPACITY IN AN EVAPORATION TEMPERATURE OF-4 ° C AND 6 K.
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-manufacturer: filteranlage, filter system - positive pressure: yes, filter hoses: 42, hose diameter in mm!: 180, length of filter tubes: ca 1500, electronic control board: yes, number of fans: no, collecting tank quantity: 5, suction pipe diameter 1 mm: 180, free text: mit abrüttelung, MANUFACTURER: FILTERANLAGE, FILTER SYSTEM - POSITIVE PRESSURE: YES, FILTER HOSES: 42, HOSE DIAMETER IN MM!: 180, LENGTH OF FILTER TUBES: CA 1500, ELECTRONIC CONTROL BOARD: YES, NUMBER OF FANS: NO, COLLECTING TANK QUANTITY: 5, SUCTION PIPE DIAMETER 1 MM: 180, FREE TEXT: MIT ABR&UUML;TTELUNG,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-air cooled condenser

cooling capacity: 41.6 kw (35° c environment, 15 / 10° c)
inlet/outlet, ethylene glycol 30%)
number of fans: 1
refrigerant: r407c
refrigerant content: 10 kg
supply: 400 v / 16.5 kw
dimensions: 2085 x 1230 x 2300 mm
weight: 1013 kg
expansion tank
water pump
  AIR COOLED CONDENSER COOLING CAPACITY: 41.6 KW (35° C ENVIRONMENT, 15 / 10° C) INLET/OUTLET, ETHYLENE GLYCOL 30%) NUMBER OF FANS: 1 REFRIGERANT: R407C REFRIGERANT CONTENT: 10 KG SUPPLY: 400 V / 16.5 KW DIMENSIONS: 2085 X 1230 X 2300 MM WEIGHT: 1013 KG EXPANSION TANK WATER PUMP
Vendedor: USD Gebrauchtmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: wipos filteranlage, type: me 22 s, year: 1995, filter system - positive pressure: yes, volume flow rate m³/h: 4100, filter surface in m²: ca.50, hose diameter in mm!: ca.150, length of filter tubes: ca., return air capable: no, vibrator motors: yes, star feeder: 3, number of fans: 1, 1st transport fan - bunker kw: 5,5, year :1995 MANUFACTURER: WIPOS FILTERANLAGE, TYPE: ME 22 S, YEAR: 1995, FILTER SYSTEM - POSITIVE PRESSURE: YES, VOLUME FLOW RATE M&SUP3;/H: 4100, FILTER SURFACE IN M&SUP2;: CA.50, HOSE DIAMETER IN MM!: CA.150, LENGTH OF FILTER TUBES: CA., RETURN AIR CAPABLE: NO, VIBRATOR MOTORS: YES, STAR FEEDER: 3, NUMBER OF FANS: 1, 1ST TRANSPORT FAN - BUNKER KW: 5,5, YEAR :1995
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-heavy welded fan.
drive via v-belt for high air performance and continuous use.

-fan is in obsolete:
  impeller shaft newly stored, gefette and mounted
-new pulleys
-air performance optimized by translation
-motor - 18.5 kw
air capacity approximately 13,000 m â³/h
vacuum approx. 3,200 pa
 HEAVY WELDED FAN. DRIVE VIA V-BELT FOR HIGH AIR PERFORMANCE AND CONTINUOUS USE. -FAN IS IN OBSOLETE: IMPELLER SHAFT NEWLY STORED, GEFETTE AND MOUNTED -NEW PULLEYS -AIR PERFORMANCE OPTIMIZED BY TRANSLATION -MOTOR - 18.5 KW AIR CAPACITY APPROXIMATELY 13,000 M &ACIRC;&SUP3;/H VACUUM APPROX. 3,200 PA
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-manufacturer: filteranlage, filter surface in m²: 120, number of fans: 1, 1st transport fan - bunker kw: 22, exhaust pipe diameter mm: 450, exhaust pipe diameter mm: 450, exhaust pipe diameter mm: 450, exhaust pipe diameter mm: 450, exhaust pipe diameter mm: 450, MANUFACTURER: FILTERANLAGE, FILTER SURFACE IN M&SUP2;: 120, NUMBER OF FANS: 1, 1ST TRANSPORT FAN - BUNKER KW: 22, EXHAUST PIPE DIAMETER MM: 450, EXHAUST PIPE DIAMETER MM: 450, EXHAUST PIPE DIAMETER MM: 450, EXHAUST PIPE DIAMETER MM: 450, EXHAUST PIPE DIAMETER MM: 450,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-nuaire sc 800 aa 46 gx + 0j

product number:m19-7075
cooling capacity:0,001 kw
number of fans:1
displacement:27500
voltage:400 volt
motor power:7,5 kw
dimensions:910 x 560 mm
weight:96 kg
year:new / unused / 2018
number in stock:24 piece(s)
price:quotation request

new unused high pressure fans for blast freezer.

please visit our website: used-refrigeration NUAIRE SC 800 AA 46 GX + 0J PRODUCT NUMBER:M19-7075 COOLING CAPACITY:0,001 KW NUMBER OF FANS:1 DISPLACEMENT:27500 VOLTAGE:400 VOLT MOTOR POWER:7,5 KW DIMENSIONS:910 X 560 MM WEIGHT:96 KG YEAR:NEW / UNUSED / 2018 NUMBER IN STOCK:24 PIECE(S) PRICE:QUOTATION REQUEST NEW UNUSED HIGH PRESSURE FANS FOR BLAST FREEZER. PLEASE VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-type: mcf 2403, control: yes, year: 2009, filter system - positive pressure: yes, volume flow rate m³/h: 8000, filter surface in m²: 60, vibrator motors: yes, electronic control board: yes, number of fans: 2, 2nd exhaust fan kw: 4, 3rd exhaust fan kw: 4, free text: inkl. feuerlöschleitung/druckentlastungsflächen/4 auffangbehälter 250 liter, year :2009 TYPE: MCF 2403, CONTROL: YES, YEAR: 2009, FILTER SYSTEM - POSITIVE PRESSURE: YES, VOLUME FLOW RATE M&SUP3;/H: 8000, FILTER SURFACE IN M&SUP2;: 60, VIBRATOR MOTORS: YES, ELECTRONIC CONTROL BOARD: YES, NUMBER OF FANS: 2, 2ND EXHAUST FAN KW: 4, 3RD EXHAUST FAN KW: 4, FREE TEXT: INKL. FEUERL&OUML;SCHLEITUNG/DRUCKENTLASTUNGSFL&AUML;CHEN/4 AUFFANGBEH&AUML;LTER 250 LITER, YEAR :2009
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-nuaire sc 800 o 45 gx – 0fm6

product number:m19-7076
cooling capacity:0,001 kw
number of fans:1
displacement:27.000
voltage:400 volt
dimensions:910 x 535 mm
weight:58 kg
year:new / unused / 2018
number in stock:78 piece(s)
price:quotation request

new unused high pressure fans for blast freezer.

please visit our website: used-refrigeration  NUAIRE SC 800 O 45 GX – 0FM6 PRODUCT NUMBER:M19-7076 COOLING CAPACITY:0,001 KW NUMBER OF FANS:1 DISPLACEMENT:27.000 VOLTAGE:400 VOLT DIMENSIONS:910 X 535 MM WEIGHT:58 KG YEAR:NEW / UNUSED / 2018 NUMBER IN STOCK:78 PIECE(S) PRICE:QUOTATION REQUEST NEW UNUSED HIGH PRESSURE FANS FOR BLAST FREEZER. PLEASE VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-technical specifications:flow rate m3/h: 45/50no 2 fanstotal connection: 30 kw spark detector: yesrotary valve: yeselectric panel: yespipe: yes TECHNICAL SPECIFICATIONS:FLOW RATE M3/H: 45/50NO 2 FANSTOTAL CONNECTION: 30 KW SPARK DETECTOR: YESROTARY VALVE: YESELECTRIC PANEL: YESPIPE: YES
Vendedor: Mercator S.R.L.
Año de construcción: usado
Ubicación: Land-lennox ash 055d nm3m

product number:m19-1214
cooling capacity:55 kw
number of fans:2
refrigerant:r410a
refrigerant content:6,42 + 6,42 kg
voltage:400 volt
power consumption:20 kw
dimensions:2000 x 1200 x 1650 mm
weight:470 kg
year:new / unused / 2017
number in stock:1 piece(s)
price:quotation request

new unused lennox condensing unit (heat pump),  consisting of 2 scroll compressors distributed over two circuits. mentioned capacity at an evaporating temperature of 7°c and an ambient temperature of 35°c. heating capacity: q = 36kw, p = 19kw at a condensing temperature of 50°c and an ambient temperature of 7°c (dry bulb) / 6°c (wet bulb).

please visit our website: used-refrigeration  LENNOX ASH 055D NM3M PRODUCT NUMBER:M19-1214 COOLING CAPACITY:55 KW NUMBER OF FANS:2 REFRIGERANT:R410A REFRIGERANT CONTENT:6,42 + 6,42 KG VOLTAGE:400 VOLT POWER CONSUMPTION:20 KW DIMENSIONS:2000 X 1200 X 1650 MM WEIGHT:470 KG YEAR:NEW / UNUSED / 2017 NUMBER IN STOCK:1 PIECE(S) PRICE:QUOTATION REQUEST NEW UNUSED LENNOX CONDENSING UNIT (HEAT PUMP), CONSISTING OF 2 SCROLL COMPRESSORS DISTRIBUTED OVER TWO CIRCUITS. MENTIONED CAPACITY AT AN EVAPORATING TEMPERATURE OF 7°C AND AN AMBIENT TEMPERATURE OF 35°C. HEATING CAPACITY: Q = 36KW, P = 19KW AT A CONDENSING TEMPERATURE OF 50°C AND AN AMBIENT TEMPERATURE OF 7°C (DRY BULB) / 6°C (WET BULB). PLEASE VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-formerly used to manufacture flowerpots using composite materials.carousel press equipped with:- inlet funnel- control cabinet- 3 aggregates- exhaust air fans + tunnel> step 1: filling> step 2: pressing> step 3: cooling & auto unloading FORMERLY USED TO MANUFACTURE FLOWERPOTS USING COMPOSITE MATERIALS.CAROUSEL PRESS EQUIPPED WITH:- INLET FUNNEL- CONTROL CABINET- 3 AGGREGATES- EXHAUST AIR FANS + TUNNEL> STEP 1: FILLING> STEP 2: PRESSING> STEP 3: COOLING & AUTO UNLOADING
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-clivet wart-2 2,130

produktnummer: m19-4325
kühlleistung: 272 kw
anzahl der fans: 6
kältemittel: r407c
kältemittelgehalt: 40 + 45 kg
nennspannung: 400 volt
motorleistung: 139 kw
abmessungen: 2950 x 2050 x 2150 mm
weight: 3800 kg
baujahr: 2003
auf bearing: 1 stück
preis: auf anfrage

luftgekühlter clivet-wasserkühler mit 6 fans und sich auf 2 2 compressors, which kreisläufe verteilen. bei einer kapazität von wassertemperatur erwähnte 12/7 ° c (ein/aus) und einer umgebungstemperatur von + 35 ° c.

besuchen sie auch unsere site: used-refrigeration CLIVET WART-2 2,130 PRODUKTNUMMER: M19-4325 KüHLLEISTUNG: 272 KW ANZAHL DER FANS: 6 KäLTEMITTEL: R407C KäLTEMITTELGEHALT: 40 + 45 KG NENNSPANNUNG: 400 VOLT MOTORLEISTUNG: 139 KW ABMESSUNGEN: 2950 X 2050 X 2150 MM WEIGHT: 3800 KG BAUJAHR: 2003 AUF BEARING: 1 STüCK PREIS: AUF ANFRAGE LUFTGEKüHLTER CLIVET-WASSERKüHLER MIT 6 FANS UND SICH AUF 2 2 COMPRESSORS, WHICH KREISLäUFE VERTEILEN. BEI EINER KAPAZITäT VON WASSERTEMPERATUR ERWäHNTE 12/7 ° C (EIN/AUS) UND EINER UMGEBUNGSTEMPERATUR VON + 35 ° C. BESUCHEN SIE AUCH UNSERE SITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-formerly used to manufacture flowerpots using composite materials.carousel press equipped with:- inlet funnel- control cabinet- 3 aggregates- exhaust air fans + tunnel> step 1: filling> step 2: pressing> step 3: cooling & auto unloading FORMERLY USED TO MANUFACTURE FLOWERPOTS USING COMPOSITE MATERIALS.CAROUSEL PRESS EQUIPPED WITH:- INLET FUNNEL- CONTROL CABINET- 3 AGGREGATES- EXHAUST AIR FANS + TUNNEL> STEP 1: FILLING> STEP 2: PRESSING> STEP 3: COOLING & AUTO UNLOADING
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-lennox pcc 015 cs

produktnummer: m19-4334
kühlleistung: 17 kw
anzahl der fans: 2
kältemittel: r410a
kältemittelgehalt: 2.6 kg
nennspannung: 400 volt
leistungsaufnahme: 5.7 kw
abmessungen: 1500 x 650 x 1400 mm
weight: 250 kg
baujahr: neu/ungebraucht/2014
auf bearing: 1 stück
preis: auf anfrage

neue luftgekühlte lennox-kaltwassermaschine mit 2 fans. bei einer kapazität von wassertemperatur erwähnte 12/7 ° c und einer umgebungstemperatur von + 35 ° c.

besuchen sie auch unsere site: used-refrigeration LENNOX PCC 015 CS PRODUKTNUMMER: M19-4334 KüHLLEISTUNG: 17 KW ANZAHL DER FANS: 2 KäLTEMITTEL: R410A KäLTEMITTELGEHALT: 2.6 KG NENNSPANNUNG: 400 VOLT LEISTUNGSAUFNAHME: 5.7 KW ABMESSUNGEN: 1500 X 650 X 1400 MM WEIGHT: 250 KG BAUJAHR: NEU/UNGEBRAUCHT/2014 AUF BEARING: 1 STüCK PREIS: AUF ANFRAGE NEUE LUFTGEKüHLTE LENNOX-KALTWASSERMASCHINE MIT 2 FANS. BEI EINER KAPAZITäT VON WASSERTEMPERATUR ERWäHNTE 12/7 ° C UND EINER UMGEBUNGSTEMPERATUR VON + 35 ° C. BESUCHEN SIE AUCH UNSERE SITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-gea glac 0524 bd2.sl

product number:m19-4333
cooling capacity:130 kw
number of fans:4
refrigerant:r410a
refrigerant content:31 kg
power consumption:52 kw
dimensions:3150 x 2250 x 2200 mm
weight:1900 kg
year:2010
number in stock:1 piece(s)
price:quotation request

very nice air-cooled gea water chiller with 4 fans and 4 scroll compressors distributed over 2 circuits. mentioned capacity at a water temperature of 12/7°c (in/out) and an ambient temperature of +35°c.

please visit our website: used-refrigeration GEA GLAC 0524 BD2.SL PRODUCT NUMBER:M19-4333 COOLING CAPACITY:130 KW NUMBER OF FANS:4 REFRIGERANT:R410A REFRIGERANT CONTENT:31 KG POWER CONSUMPTION:52 KW DIMENSIONS:3150 X 2250 X 2200 MM WEIGHT:1900 KG YEAR:2010 NUMBER IN STOCK:1 PIECE(S) PRICE:QUOTATION REQUEST VERY NICE AIR-COOLED GEA WATER CHILLER WITH 4 FANS AND 4 SCROLL COMPRESSORS DISTRIBUTED OVER 2 CIRCUITS. MENTIONED CAPACITY AT A WATER TEMPERATURE OF 12/7°C (IN/OUT) AND AN AMBIENT TEMPERATURE OF +35°C. PLEASE VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-trane rtac 275

produktnummer: m19-4332
kühlleistung: 947 kw
anzahl der fans: 16
kältemittel: r134a
kältemittelgehalt: 154 + 93 kg
nennspannung: 400 volt
leistungsaufnahme: 331 kw
abmessungen: 9200 x 2300 x 2500 mm
weight: 8450 kg
baujahr: 2002
auf bearing: 1 stück
preis: auf anfrage

schöne kaltwassermaschine mit luftgekühlte trane 16 fans und sich auf 2 kreisläufe 3 kompressoren, verteilen. bei einer kapazität von wassertemperatur erwähnte 7 ° c (ausgang) und einer umgebungstemperatur von + 35 ° c.

besuchen sie unsere site: used-refrigeration TRANE RTAC 275 PRODUKTNUMMER: M19-4332 KüHLLEISTUNG: 947 KW ANZAHL DER FANS: 16 KäLTEMITTEL: R134A KäLTEMITTELGEHALT: 154 + 93 KG NENNSPANNUNG: 400 VOLT LEISTUNGSAUFNAHME: 331 KW ABMESSUNGEN: 9200 X 2300 X 2500 MM WEIGHT: 8450 KG BAUJAHR: 2002 AUF BEARING: 1 STüCK PREIS: AUF ANFRAGE SCHöNE KALTWASSERMASCHINE MIT LUFTGEKüHLTE TRANE 16 FANS UND SICH AUF 2 KREISLäUFE 3 KOMPRESSOREN, VERTEILEN. BEI EINER KAPAZITäT VON WASSERTEMPERATUR ERWäHNTE 7 ° C (AUSGANG) UND EINER UMGEBUNGSTEMPERATUR VON + 35 ° C. BESUCHEN SIE UNSERE SITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-airwell vlh 1204 ln

product number:m19-4330
cooling capacity:280 kw
number of fans:4
refrigerant:r407c
refrigerant content:54 + 54 kg
voltage:400 volt
power consumption:146 kw
dimensions:4300 x 1200 x 2300 mm
weight:2350 kg
year:2007
number in stock:1 piece(s)
price:quotation request


nice air cooled airwell water chiller/ heat pump with 4 fans. this chiller is equipped with 4 scroll compressors distributed over 2 circuits. mentioned capacity at an water temperature of 7°c (out) and an ambient temperature of +35°c. heating capacity: 298kw @ 45°c and ambient temperature of 7°c.

please visit our website: used-refrigeration  AIRWELL VLH 1204 LN PRODUCT NUMBER:M19-4330 COOLING CAPACITY:280 KW NUMBER OF FANS:4 REFRIGERANT:R407C REFRIGERANT CONTENT:54 + 54 KG VOLTAGE:400 VOLT POWER CONSUMPTION:146 KW DIMENSIONS:4300 X 1200 X 2300 MM WEIGHT:2350 KG YEAR:2007 NUMBER IN STOCK:1 PIECE(S) PRICE:QUOTATION REQUEST NICE AIR COOLED AIRWELL WATER CHILLER/ HEAT PUMP WITH 4 FANS. THIS CHILLER IS EQUIPPED WITH 4 SCROLL COMPRESSORS DISTRIBUTED OVER 2 CIRCUITS. MENTIONED CAPACITY AT AN WATER TEMPERATURE OF 7°C (OUT) AND AN AMBIENT TEMPERATURE OF +35°C. HEATING CAPACITY: 298KW @ 45°C AND AMBIENT TEMPERATURE OF 7°C. PLEASE VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-york 

product number:m19-4329
cooling capacity:573 kw
number of fans:10
refrigerant:r134a
refrigerant content:80 + 80 kg
voltage:400 volt
dimensions:6300 x 2300 x 2450 mm
weight:6200 kg
year:2014
number in stock:1 piece(s)
price:quotation request


very nice air cooled york water chiller with 10 fans.

please visit our website: used-refrigeration  YORK PRODUCT NUMBER:M19-4329 COOLING CAPACITY:573 KW NUMBER OF FANS:10 REFRIGERANT:R134A REFRIGERANT CONTENT:80 + 80 KG VOLTAGE:400 VOLT DIMENSIONS:6300 X 2300 X 2450 MM WEIGHT:6200 KG YEAR:2014 NUMBER IN STOCK:1 PIECE(S) PRICE:QUOTATION REQUEST VERY NICE AIR COOLED YORK WATER CHILLER WITH 10 FANS. PLEASE VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-guentner s-gfh 101b/2x5s

product number:m19-3205
cooling capacity:518 kw
number of fans:10
refrigerant:water / glycol
refrigerant content:364 kg
voltage:400 volt
dimensions:10500 x 2400 x 1600 mm
weight:1805 kg
year:1997
number in stock:4 piece(s)
price:quotation request

nice guentner dry-cooler with 10 fans. mentioned capacity at a water temperature of 40/35°c (in/out) and an ambient temperature of 25°c and 34% ethylene glycol.

please visit our website: used-refrigeration   GUENTNER S-GFH 101B/2X5S PRODUCT NUMBER:M19-3205 COOLING CAPACITY:518 KW NUMBER OF FANS:10 REFRIGERANT:WATER / GLYCOL REFRIGERANT CONTENT:364 KG VOLTAGE:400 VOLT DIMENSIONS:10500 X 2400 X 1600 MM WEIGHT:1805 KG YEAR:1997 NUMBER IN STOCK:4 PIECE(S) PRICE:QUOTATION REQUEST NICE GUENTNER DRY-COOLER WITH 10 FANS. MENTIONED CAPACITY AT A WATER TEMPERATURE OF 40/35°C (IN/OUT) AND AN AMBIENT TEMPERATURE OF 25°C AND 34% ETHYLENE GLYCOL. PLEASE VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Precio: 89.000 €
Ubicación: Land-1.	loading belt conveyor (3.500) with inverter, controlled by and synchronized with the speed of the robot pos.5
2.	panel cleaning machine for top and bottom sides and edges our type g95/24
•	ex-proof electrical motors, electrical switchboard on the machine ip.55
3.	triangular bars conveyor for manual stain retouch, double speed complete with photocells, total length 7.000mm.  with automatic and manual control
4.	composition conveyor, with two speeds controlled by photocells 4.500mm long
•	preheating hood equipped with 3 irm lamps, 3,25 kw. each one, recommended to ensure a reasonable temperature on the panel surface to ensure a better floating of the lacquer sprayed on the panel
•	pressurized pre-chamber, directly supplied by the air make unit of the robot room pos.5
•	top fix de-ionizing blowing bar with 20 nozzles
5.	6 axes robotech gs/25 steel belt na 1500 
•	pressurized cabinet with air make-up unit, cleaning box type, to filtrate and supply air into the cabinet of the machine and pressurize it.
•	automatic washing of the guns heads by means of nylon spiral brush started by pneumatic motor
•	reciprocating head for 4 guns
•	scrubber with sludge collection into non-returnable bags
•	steam battery with stainless steel pipes
•	second spray circuit
6-7	flash-off tunnel, with hot air and 126 tlm low pressure uv-lamps consisting of:
•	straight conveying system for a total length of 6.500 mm
•	180° conical rollers curve, average radius 3.500mm.  the curve will be covered with a flash-off hood
•	linear bar conveyor, pitch 100mm, 24.00mm. long, also covered with flash off hood, including in the final part 126 tlm lamps 140 watt each
•	•	ex-proof motors and spark proof fans
8.	uv curing tunnel our type gst 1500/4 - 3d type (2 x ga 80 watt + 2 x mc 80 watt) + 1400/1 for the lower side installed on a transpor11.500mm long .  gallium lamps for the curing of pigmented lacquers. 

cefla finishing, superfici, venjacob. 
can be split to make smaller line if required
in like new condition - only used occasionally. can be seen working.   
price is ex works, monaghan, ireland. purchaser is responsible for dismantling, loading & shipping.  1. LOADING BELT CONVEYOR (3.500) WITH INVERTER, CONTROLLED BY AND SYNCHRONIZED WITH THE SPEED OF THE ROBOT POS.5 2. PANEL CLEANING MACHINE FOR TOP AND BOTTOM SIDES AND EDGES OUR TYPE G95/24 • EX-PROOF ELECTRICAL MOTORS, ELECTRICAL SWITCHBOARD ON THE MACHINE IP.55 3. TRIANGULAR BARS CONVEYOR FOR MANUAL STAIN RETOUCH, DOUBLE SPEED COMPLETE WITH PHOTOCELLS, TOTAL LENGTH 7.000MM. WITH AUTOMATIC AND MANUAL CONTROL 4. COMPOSITION CONVEYOR, WITH TWO SPEEDS CONTROLLED BY PHOTOCELLS 4.500MM LONG • PREHEATING HOOD EQUIPPED WITH 3 IRM LAMPS, 3,25 KW. EACH ONE, RECOMMENDED TO ENSURE A REASONABLE TEMPERATURE ON THE PANEL SURFACE TO ENSURE A BETTER FLOATING OF THE LACQUER SPRAYED ON THE PANEL • PRESSURIZED PRE-CHAMBER, DIRECTLY SUPPLIED BY THE AIR MAKE UNIT OF THE ROBOT ROOM POS.5 • TOP FIX DE-IONIZING BLOWING BAR WITH 20 NOZZLES 5. 6 AXES ROBOTECH GS/25 STEEL BELT NA 1500 • PRESSURIZED CABINET WITH AIR MAKE-UP UNIT, CLEANING BOX TYPE, TO FILTRATE AND SUPPLY AIR INTO THE CABINET OF THE MACHINE AND PRESSURIZE IT. • AUTOMATIC WASHING OF THE GUNS HEADS BY MEANS OF NYLON SPIRAL BRUSH STARTED BY PNEUMATIC MOTOR • RECIPROCATING HEAD FOR 4 GUNS • SCRUBBER WITH SLUDGE COLLECTION INTO NON-RETURNABLE BAGS • STEAM BATTERY WITH STAINLESS STEEL PIPES • SECOND SPRAY CIRCUIT 6-7 FLASH-OFF TUNNEL, WITH HOT AIR AND 126 TLM LOW PRESSURE UV-LAMPS CONSISTING OF: • STRAIGHT CONVEYING SYSTEM FOR A TOTAL LENGTH OF 6.500 MM • 180° CONICAL ROLLERS CURVE, AVERAGE RADIUS 3.500MM. THE CURVE WILL BE COVERED WITH A FLASH-OFF HOOD • LINEAR BAR CONVEYOR, PITCH 100MM, 24.00MM. LONG, ALSO COVERED WITH FLASH OFF HOOD, INCLUDING IN THE FINAL PART 126 TLM LAMPS 140 WATT EACH • • EX-PROOF MOTORS AND SPARK PROOF FANS 8. UV CURING TUNNEL OUR TYPE GST 1500/4 - 3D TYPE (2 X GA 80 WATT + 2 X MC 80 WATT) + 1400/1 FOR THE LOWER SIDE INSTALLED ON A TRANSPOR11.500MM LONG . GALLIUM LAMPS FOR THE CURING OF PIGMENTED LACQUERS. CEFLA FINISHING, SUPERFICI, VENJACOB. CAN BE SPLIT TO MAKE SMALLER LINE IF REQUIRED IN LIKE NEW CONDITION - ONLY USED OCCASIONALLY. CAN BE SEEN WORKING. PRICE IS EX WORKS, MONAGHAN, IRELAND. PURCHASER IS RESPONSIBLE FOR DISMANTLING, LOADING & SHIPPING.
Vendedor: John E Coyle Furniture
Año de construcción: usado
Ubicación: Land-brand: gea
power: 65 kw
year of manufacture: 2004
refrigerant circuit: 2 pieces
type of refrigerant: r407c
compressors: 2 pcs. copeland (scroll)
number of fans: 6 pcs.
hydraulic module: water pump, buffer tank.
dimensions: 2.2 ? 1.1 ? 1.4 m.
weight: 700 kg.
?ondition: this chiller is in perfect condition BRAND: GEA POWER: 65 KW YEAR OF MANUFACTURE: 2004 REFRIGERANT CIRCUIT: 2 PIECES TYPE OF REFRIGERANT: R407C COMPRESSORS: 2 PCS. COPELAND (SCROLL) NUMBER OF FANS: 6 PCS. HYDRAULIC MODULE: WATER PUMP, BUFFER TANK. DIMENSIONS: 2.2 ? 1.1 ? 1.4 M. WEIGHT: 700 KG. ?ONDITION: THIS CHILLER IS IN PERFECT CONDITION
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Precio: 2.490 €
Ubicación: Land-â?¢ manufacturer: teko
â?¢ type: a4-500
â?¢ model: tekoset whisper
â?¢ compressor manufacturers: frascold
â?¢ compressor type: s7-33y
â?¢ length: 2.42 m
â?¢ width: 0,83 m
â?¢ height: ca. 1,38 m
â?¢ refrigerant: r134a
â?¢ year of construction: 2015
â?¢ rugged weatherproof housing with 4 fans
&ACIRC;?&CENT; MANUFACTURER: TEKO &ACIRC;?&CENT; TYPE: A4-500 &ACIRC;?&CENT; MODEL: TEKOSET WHISPER &ACIRC;?&CENT; COMPRESSOR MANUFACTURERS: FRASCOLD &ACIRC;?&CENT; COMPRESSOR TYPE: S7-33Y &ACIRC;?&CENT; LENGTH: 2.42 M &ACIRC;?&CENT; WIDTH: 0,83 M &ACIRC;?&CENT; HEIGHT: CA. 1,38 M &ACIRC;?&CENT; REFRIGERANT: R134A &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 2015 &ACIRC;?&CENT; RUGGED WEATHERPROOF HOUSING WITH 4 FANS
Vendedor: USEDmarket GmbH
Año de construcción: usado
Precio: 350 €
Ubicación: Land-â?¢ manufacturer: gã¼ntner
â?¢ type: s-cxgdf 020.1c/24-en150. e
â?¢ length: approx. 1.08 m
â?¢ width: 0,55 m
â?¢ height: 0.38 m
â?¢ refrigerants: co2 (r744)
â?¢ year of construction: 2010
â?¢ with 2 fans
&ACIRC;?&CENT; MANUFACTURER: G&ATILDE;&FRAC14;NTNER &ACIRC;?&CENT; TYPE: S-CXGDF 020.1C/24-EN150. E &ACIRC;?&CENT; LENGTH: APPROX. 1.08 M &ACIRC;?&CENT; WIDTH: 0,55 M &ACIRC;?&CENT; HEIGHT: 0.38 M &ACIRC;?&CENT; REFRIGERANTS: CO2 (R744) &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 2010 &ACIRC;?&CENT; WITH 2 FANS
Vendedor: USEDmarket GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)