Compresores de tornillo

Description: 7.5 kW compressor Max pressure 10 bar Air dryer 0.475 kW Air tank 500 LT Working hours 2878.17model: RLR 900 TF/500B, Approx. Onsite Dimension. (l x w x h): 1,900 x 900 x 1,700 mm, weight approx.: 331 kg

Description: Serial number: F1213726/S0022101 Volume flow: 1.09 - 3.09 m³/min Ultimate pressure: 5 - 13 bar Motor power: 15 kW Motor speed: 2000 - 5000 rpmApprox. Onsite Dimension. (l x w x h): 1,200 x 900 x 1,350 mm, weight approx.: 700 kg

Description: • Screw compressor • Serial number AII 220889 • Motor power 11 KW-3000 rpm • Maximum working pressure 7.50 bar • Air flow 1860 l/minApprox. Onsite Dimension. (l x w x h): 1,150 x 800 x 1,160 mm, weight approx.: 400 kg

Description: max. pressure 10 bar Power consumption 15 kW Delivery rate 2,100 l/min Operating hours 41,246 B/h Load hours 33,886 B/h Test run carried out, see video E-motor bearings and shaft seal replaced at 27,981 B/hmodelname / number: AII 257170, Approx. Onsite Dimension. (l x w x h): 1,230 x 680 x 1,400 mm, weight approx.: 475 kg

Description: max. pressure 10 bar Power consumption 15 kW Delivery rate 2,100 l/min Operating hours 18,636 B/h Load hours 15,210 B/h Test run carried out, see videomodelname / number: AII 249838, Approx. Onsite Dimension. (l x w x h): 1,120 x 800 x 1,150 mm, weight approx.: 450 kg

Description: • Screw compressor with built-in air dryer • Serial number  ,AII 237101 • Motor power 22 KW-3000 rpm • Maximum working pressure 7.50 bar • Air flow 3600 l/min • ATLAS COPCO ID 60 built-in air dryerApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,160 mm, weight approx.: 480 kg

Description: max. pressure 9.8 bar Power consumption 30 kW Delivery rate 4,800 l/min Operating hours 54,158 B/h Load hours 43,087 B/h Newly stored at 36,949 on 13.09.2017 Test run carried out, see videosuction capacity: 30 kW, modelname / number: API 595756, Approx. Onsite Dimension. (l x w x h): 1,400 x 850 x 1,620 mm, weight approx.: 835 kg

Description: Power consumption: 55 kW Delivery rate: 1,450 - 19,360 l/min Operating hours: 47,064 b/h Electric motor with new bearings Machine runs, but has bearing noises on the screw element Machine is sold as defective Utilization: 0 - 20: 2% 20 - 40: 86% 40 - 60: 10% 60 - 80: 2% 80 - 100: 0%operating pressure: max. 12,8 bar, modelname / number: API 572745, Approx. Onsite Dimension. (l x w x h): 2,040 x 970 x 1,800 mm, weight approx.: 1,350 kg

feed pressure: 9,8 barliter capacity: 17 l/svolume capacity: 1,02 m³/mintotal power requirement: 7,5 kWweight of the machine ca.: 0,352 tAtlas Copco screw compressor G 7 FF - 9.8 bar incl. 270 litre tankFully automatic, internally fully piped and wired compact unit, single-stage, oil-injected compression, air-cooled, sound-insulated. Built-in refrigeration dryer.- Steel base frame for installation without foundations. Compressor and motor elastically mounted on base frame.- V-belt drive with mechanical tensioning device between motor and compressor element.- Sheet steel acoustic bonnet with large removable side panels.- Air intake filter with loading and unloading valve.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: serial number: AII 467935 Technical specifications: maximum working pressure: 10 bar free air delivery: 192 l/s nominal shaft power: 75kW rotational shaft speed: 3000 rot/min air dryer is included in the compressor (full-feature) control panel: Elektronikon total working hours: aprox 64370 model: GA75, operating pressure: 10 bar, year of manufacture: 1,999, Approx. Onsite Dimension. (l x w x h): 2,150 x 1,050 x 2,050 mm, weight approx.: 1,700 kg

Description: Machine number AII 469040 max. pressure 7.5 bar Power consumption 75 kW Delivery rate 14,040 l/min Operating hours 46,900 b/h new touch electronics installed Approx. Onsite Dimension. (l x w x h): 2,290 x 1,000 x 2,000 mm, weight approx.: 1,550 kg

Description: Machine number API 658431 max. pressure 13 bar Power consumption 75 kW Delivery rate 14,680 l/min Operating hours unknown , Electrical frequency converter defective Machine is sold as defective Approx. Onsite Dimension. (l x w x h): 2,290 x 1,080 x 1,820 mm, weight approx.: 1,680 kg

Description: Pmax: 7,8bar Flow rate: 13,82m3/min Motor power: 75kW Motor rpm: 2950 1/min operating pressure: 8, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,000 x 2,000 mm, weight approx.: 1,700 kg

presión de alimentación: 8 barlitro capacidad: lpotencia total requerida: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: m

flow rate: 1,95 m3/min, suction capacity: 11 kW, operating pressure: 13, Approx. Onsite Dimension. (l x w x h): 630 x 630 x 1,400 mm, weight approx.: 191 kg

Description: Operating hours 71,073 B/h Utilization: 0-20 = 2% | ,20-40 = 74% | 40-60 = 11% | 60-80 = 7% | ,80-100 = 6% The machine runs, but has bearing noisesdriving power to: 30 kW, flow rate: 4.580 l/min, operating pressure: max. 13 bar, modelname / number: AII 298855, year of manufacture: 2,004, Approx. Onsite Dimension. (l x w x h): 1,680 x 65 x 1,400 mm, weight approx.: 520 kg

Description: Serial number: AP1434011 Operating voltage: 400 V Frequency: 50 Hz Connection. 30 kW Speed: 6000 rpm Volume flow: 5.58 m³/min Operating pressure: 12.75 bar Operating hours read: 3258Approx. Onsite Dimension. (l x w x h): 1,300 x 1,000 x 1,600 mm, weight approx.: 600 kg

Presión de alimentación: 7 bar Capacidad de litro: 1000 l/min Presión de funcionamiento: 10 barPotencia total requerida: 7,5 kWPeso de la máquina aprox.: 0,52 tDimensiones de la máquina aprox.: 2,4 x 1,0 x 1,9 mCompresor combinado Srew con secador y tanque- secado- Tanque- ruido lvl. 72 dB

1 tanque de aire de pato (aprox. 1500 ltr.), construido: aprox. 2014 1 secador frigorífico de aire comprimido (Boge); Año: aprox. 2014 1 separador de aceite y agua

Presión de alimentación: 8 barCapacidad de litro: 1,65 m³ / minDimensiones: 1000 x 750 x 950 mmPotencia total requerida: 11 kWPeso de la máquina aprox.: 175 kg

Presión de alimentación: 10 barCapacidad de litro: 2,66 m³ / minPotencia total requerida: 18,5 kWVelocidades del motor: 3000 min/1Dimensiones: 1200 x 900 x 1200 mmPeso de la máquina aprox.: 150 kg

Description:  , Maximumdruk: 13 bar Motor: 22 kW Voltage: 400 V / 50 Hz Working Hours: 30000hflow rate: 3,88 m3/h, suction capacity: 22 kW, operating pressure: 10 bar, year of manufacture: 2,011, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,450 x 960 mm, weight approx.: 620 kg

feed pressure: 10 barEffective free air delivery: 1.450 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 452 kg.total power requirement: 11,0 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in GermanyFurnishing:- with container and dryer / can be used immediately- SOLIDcontrol microprocessor control- Network pressure sensor- Belt-driven drive system- low compressed air temperature due to effective aftercooler- Compressed air tank installed horizontally- including cold compressed air dryer working automatically with pre- and post-filter (mounted)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barEffective free air delivery: 1.950 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 467 kg.total power requirement: 15,0 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in GermanyFurnishing:- with container and dryer / can be used immediately- SOLIDcontrol microprocessor control- Network pressure sensor- Belt-driven drive system- low compressed air temperature due to effective aftercooler- Compressed air tank installed horizontally- including cold compressed air dryer working automatically with pre- and post-filter (mounted)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barEffective free air delivery: 490 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 246 kg.total power requirement: 4,0 kWrange L-W-H: 1240 x 650 x 950 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 7.476 euros Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barEffective free air delivery: 700 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 397 kg.total power requirement: 5,5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in GermanyFurnishing:- with container and dryer / can be used immediately- SOLIDcontrol microprocessor control- Network pressure sensor- Belt-driven drive system- low compressed air temperature due to effective aftercooler- Compressed air tank installed horizontally- including cold compressed air dryer working automatically with pre- and post-filter (mounted)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barEffective free air delivery: 1.000 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 463 kg.total power requirement: 7,5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in GermanyFurnishing:- with container and dryer / can be used immediately- SOLIDcontrol microprocessor control- Network pressure sensor- Belt-driven drive system- low compressed air temperature due to effective aftercooler- Compressed air tank installed horizontally- including cold compressed air dryer working automatically with pre- and post-filter (mounted)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Recorded operating hours 18,594, maximum pressure 7.5 bar, motor power 37 kW, motor speed 2165 rpm, final compression pressure 10 bar, volume flow 2.25 to 6.43 cubic meters per minute, without ventilation duct, with CE certificateflow rate: 6.43, year of manufacture: 2,014, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,100 x 2,000 mm, weight approx.: 1,300 kg

Description: Calculated operating hours engine 7,490, rated power drive motor 37 kW, ,final compression pressure 8 bar, volume flow 2.30 - 7.16 cubic meters/min, ,engine speed 2520 rpmflow rate: 7.16, Approx. Onsite Dimension. (l x w x h): 1,100 x 2,100 x 1,500 mm, weight approx.: 1,300 kg

Description: serial number: 20158 engine power: 11 kW capacity: 1.45 m3/min max. ,pressure: 10 bar  , transport dimensions: compressor: ,950 x 700 x 960 mm tank: ,1000 x 1000 x 2400 mm flow rate: 1,45 m3/min, suction capacity: 11 kW, operating pressure: 10, modelname / number: S15, year of manufacture: 1995/2018, Approx. Onsite Dimension. (l x w x h): 1,000 x 1,700 x 2,400 mm, weight approx.: 1,000 kg

presión de alimentación: 8 barpotencia total requerida: 11 kWAño: 1995

Presión de alimentación: 10 bar Capacidad del litro: 15,5 l/sPotencia total requerida: 7,5 kWPeso de la máquina aprox.: 0,2 TDimensiones de la máquina aprox.: 0,8 x 0,7 x 1,0 mCompresor Compact SREW- Refrigeración Secado Híbrido de Energía Seca- Tanque 500 ltr., 11 bar

Description: Compact screw compressor. With built-in dryer Power: 15kW Max pressure: 10bar Internal reference: ,CBT-064X Approx. Onsite Dimension. (l x w x h): 830 x 530 x 1,100 mm, weight approx.: 250 kg

Description: Operating hours: 7549 h MTA MPiTech air dryer Dryer size: 400x500x600 mm MTA filter Air buffer tank 900 L Tank dimension: Ø750x2100 mmflow rate: 2,6 m3/min, suction capacity: 18 kW, operating pressure: 10 bar, Approx. Onsite Dimension. (l x w x h): 950 x 750 x 1,150 mm, weight approx.: 250 kg

Presión de alimentación: 10 barCapacidad de litro: 1400 m³ / minDimensiones: 700 x 550 x 1100 mmPotencia total requerida: 11 kWPeso de la máquina aprox.: 275 kg

Description: Rotary screw compressor Power: 22kW (30hp) Max pressure: 10 bar (145psi) 400V/3 50Hz Internal reference: ,CBT-045X Approx. Onsite Dimension. (l x w x h): 1,300 x 720 x 1,100 mm, weight approx.: 500 kg

Description: 380V/50Hz Motor RPM: 1475 , Approx. Onsite Dimension. (l x w x h): 4,000 x 2,500 x 2,000 mm, weight approx.: 6,000 kg

Description: 68.143 hours of operationdriving power to: 45 kW, flow rate: 1.240 - 6.870 l/min, operating pressure: 13 bar, modelname / number: BA 21675001, year of manufacture: 2,011, Approx. Onsite Dimension. (l x w x h): 1,720 x 920 x 166 mm, weight approx.: 980 kg

motor: 220/380/420 V amperio: 4.75/2.75 Avelocidades motoras:: 1420 U/min. potencia del motor: 1,1 kWpeso: 100 kg

Description: Screw compressor with FriulAir air dryer Brand: HYDROVANE Year built: 2015 Motor: 7.5 kW Speed: 1,465 rpm Max. pressure: 11 Bar Air dryer: Brand: FriulAir Year of construction: 2015 Type: ACT12/AC Volume: Nom. 1,200 l/Min. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,400 mm, weight approx.: 100 kg

Description: load hours 43.500 B/h Compressor re-storage at 55,069/32,985 B/h driving power to: 43 kW, flow rate: ca. 6.000 l/min, operating pressure: max. 8,5 bar, modelname / number: 2,273,050, year of manufacture: 2,001, Approx. Onsite Dimension. (l x w x h): 1,600 x 900 x 1,800 mm, weight approx.: 870 kg

flow rate: 1,54 m3/min, suction capacity: 11,5 kW, operating pressure: 9, Approx. Onsite Dimension. (l x w x h): 1,350 x 700 x 1,000 mm, weight approx.: 400 kg

Description: Model: Javac COMBI 10 Compressor type: Scrollcompressor Voltage: 3400v Motor power: 10 HP (7.5 kW) B3 IE-3 low torque Controller: Softstart Efficiency: 1100 l/min Maximum working pressure: 8.6 Bar Speed: 2900 rpm Tank capacity: 270 liters Dimensions: 1400x1600x870 mm Weight: 360 kg model: Javac COMBI 10, year of manufacture: 2,020, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,600 x 870 mm, weight approx.: 400 kg

Description: Model: Javac COMBI 10 Compressor type: Scrollcompressor Voltage: 3400v Motor power: 10 HP (7.5 kW) B3 IE-3 low torque Controller: Softstart Efficiency: 1100 l/min Maximum working pressure: 8.6 Bar Speed: 2900 rpm Tank capacity: 270 liters Dimensions: 1400x1600x870 mm Weight: 400 kg tank size: 270L, modelname / number: COMBI 10, year of manufacture: 200, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,600 x 870 mm, weight approx.: 400 kg

Description: Power: 30kW (40hp) Max. operating pressure: 10 bar 380V, 50Hz Internal reference: ,CBT-030X Approx. Onsite Dimension. (l x w x h): 1,550 x 1,000 x 1,300 mm, weight approx.: 500 kg

Description: max. working pressure: 10 ,bars rated ,power: 5,5 kW working hours total: approx. 1492 hrs working hours under load: approx. 531 hrs time left till maintenance: approx. 1508 hrs Please note: compressors are delivered free of liquids, media, oils and fluids inside!suction capacity: 5.5 kW, operating pressure: 10 bar, modelname / number: AIRCENTER SM 10, year of manufacture: 2,022, Approx. Onsite Dimension. (l x w x h): 630 x 594 x 1,716 mm, weight approx.: 410 kg

Description: volume flow at 8 bar ( g) 0,73 m³/min , total working hours: approx. 19000 hrs. integrated air dryer Kaeser TA 5 , volume of compressed air tank: 280 l , rated power of drive motor: 5.5 kW , drive motor speed: 2930 rpm , , refrigerant: R134 a , , filling quantity cooling oil: 3.9 l ,  , please also have a look at the video of this compressor compressors are delivered free of liquids, media, oils and fluids inside! modelname / number: SM8TA8-280, year of manufacture: 1,999, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 1,500 mm, weight approx.: 440 kg

Description: rated power: 22 kW , air flow: 3600 l/min. working hours: approx. 12100 hrs. / approx. 9000 hrs. under load , max. working pressure: 10 bars , time left to regular maintenance: approx. 2500 hrs. ,  , refurbished compressor, parts replaced: electric motor bearings intake valve original service kit , MPV original service kit , thermostat , air filter , oil filter air/oil separator , cabin filter ,  , please also have a look at the video of this machine , compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 3600 l/min., suction capacity: 22 kW, operating pressure: 10 bar, modelname / number: Airtower 36, year of manufacture: 2,000, Approx. Onsite Dimension. (l x w x h): 1,420 x 813 x 1,092 mm, weight approx.: 490 kg

Description: Screw Compressor Serial number 1330 Pressure 7.5bar Motor 5.5 kW Speed 3000 r.p.m. Working hours according counter 32136 h CE availableApprox. Onsite Dimension. (l x w x h): 600 x 850 x 1,300 mm, weight approx.: 170 kg

Description: serial number: ,1157 control: SIGMA working hours: approx. 29020 hrs. working hours under load: approx. 14319 hrs.  , regulary serviced: A,B,C service  ,operating pressure: 6.5, modelname / number: AS36, year of manufacture: 2,000, Approx. Onsite Dimension. (l x w x h): 1,420 x 860 x 1,090 mm, weight approx.: 500 kg