653 ofertas

Año de construcción: usado
Precio: 48.600 €
Ubicación: Land-whole body 64 slice ct scanner, professionally deinstalled
system sn s0009, gantry sn ka17719001 
software revision v1.80 (service pack 1.11) with dicom q/r, mwm
mcs7070hp tube replaced august 2017 (currently <130,000 scan seconds)
72kw generator type ct-wg-70 (dom 2015) WHOLE BODY 64 SLICE CT SCANNER, PROFESSIONALLY DEINSTALLED SYSTEM SN S0009, GANTRY SN KA17719001 SOFTWARE REVISION V1.80 (SERVICE PACK 1.11) WITH DICOM Q/R, MWM MCS7070HP TUBE REPLACED AUGUST 2017 (CURRENTLY <130,000 SCAN SECONDS) 72KW GENERATOR TYPE CT-WG-70 (DOM 2015)
Vendedor: Block Imaging International
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer paal<br/>typ konti 600 d<br/>year of construction 2001<br/>hours of operation 26,784 hours, stand january 2019<br/>press power main press 145 tons<br/>feed channel 2,000 x 1,020 mm<br/>filling volume 3,45 m³<br/>theoretic  throughput rate 1,070 m³/h<br/>throughput rate under operating conditions 540 m³/h<br/>bale size 1,100 x 1,080 mm, length variable<br/>driving motor 3 x 45 kw<br/>ruffler 15 kw<br/>connected load 185 kw<br/>rated current 340 a<br/>tying system 5 fold vertical, full automatic<br/>throughput rate at a<br/>bulk weight of 35 kg/cbm approx. 17 tons/h<br/>bulk weight of 60 kg/cbm approx. 30 tons/h<br/>bulk weight of 100 kg/cbm approx. 47 tons/h<br/>bale weight 800 up to 1,250 kg, depends on bale length and material<br/>volume hydraulic oil 3,100 l<br/>transport dimensions only baler 14,365 x 2,600 x 3,640 mm (l x w x h)<br/>machine weight baler approx. 32 tons<br/><br/>technical data conveyor belt<br/>manufacturer   metaalwaren de schermer<br/>typ skb 1800<br/>year of construction 12/2002<br/>driving motor 7,5 kw<br/>belt speed 0,3 m/sec.<br/>length feeding conveyor 10,500 mm<br/>length elevating conveyor 8,000 mm<br/>effecting width 1,700 mm<br/>pit dimensions 14,000 x 2,500 x 1,510 mm (l x w x d)<br/>weight approx. 12,5 tons<br/><br/>comments:<br/>the press with conveyor belt is currently still in operation, the replacement with a new system is planned for the 2nd quarter of this year. <br/>the scope of delivery includes a conveyor belt (chain belt conveyor, manufacturer  metaalwaren de schermer, type skb 1800), 10 wire stations (without wire) and a bale slider.<br/>the documentation (manual, ce, electrical/hydraulic diagram) is available. an inspection is possible after arrangement. dismantling and loading is the responsibility of the buyer. we assume no liability for the technical data or any errors. TECHNICAL DATA BALER
MANUFACTURER PAAL
TYP KONTI 600 D
YEAR OF CONSTRUCTION 2001
HOURS OF OPERATION 26,784 HOURS, STAND JANUARY 2019
PRESS POWER MAIN PRESS 145 TONS
FEED CHANNEL 2,000 X 1,020 MM
FILLING VOLUME 3,45 M³
THEORETIC THROUGHPUT RATE 1,070 M³/H
THROUGHPUT RATE UNDER OPERATING CONDITIONS 540 M³/H
BALE SIZE 1,100 X 1,080 MM, LENGTH VARIABLE
DRIVING MOTOR 3 X 45 KW
RUFFLER 15 KW
CONNECTED LOAD 185 KW
RATED CURRENT 340 A
TYING SYSTEM 5 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 35 KG/CBM APPROX. 17 TONS/H
BULK WEIGHT OF 60 KG/CBM APPROX. 30 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 47 TONS/H
BALE WEIGHT 800 UP TO 1,250 KG, DEPENDS ON BALE LENGTH AND MATERIAL
VOLUME HYDRAULIC OIL 3,100 L
TRANSPORT DIMENSIONS ONLY BALER 14,365 X 2,600 X 3,640 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 32 TONS

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER METAALWAREN DE SCHERMER
TYP SKB 1800
YEAR OF CONSTRUCTION 12/2002
DRIVING MOTOR 7,5 KW
BELT SPEED 0,3 M/SEC.
LENGTH FEEDING CONVEYOR 10,500 MM
LENGTH ELEVATING CONVEYOR 8,000 MM
EFFECTING WIDTH 1,700 MM
PIT DIMENSIONS 14,000 X 2,500 X 1,510 MM (L X W X D)
WEIGHT APPROX. 12,5 TONS

COMMENTS:
THE PRESS WITH CONVEYOR BELT IS CURRENTLY STILL IN OPERATION, THE REPLACEMENT WITH A NEW SYSTEM IS PLANNED FOR THE 2ND QUARTER OF THIS YEAR.
THE SCOPE OF DELIVERY INCLUDES A CONVEYOR BELT (CHAIN BELT CONVEYOR, MANUFACTURER METAALWAREN DE SCHERMER, TYPE SKB 1800), 10 WIRE STATIONS (WITHOUT WIRE) AND A BALE SLIDER.
THE DOCUMENTATION (MANUAL, CE, ELECTRICAL/HYDRAULIC DIAGRAM) IS AVAILABLE. AN INSPECTION IS POSSIBLE AFTER ARRANGEMENT. DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. WE ASSUME NO LIABILITY FOR THE TECHNICAL DATA OR ANY ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-thickness planer (530 mm)
sma-ref-6410
category: thickness planer
manufacturer: sac
type: rs 530
year of construction: 1982
motor: 4 kw
workspace:
planing width: 530 mm
planing height: 240 mm
special features:
4-drum
electr. height adjustment
condition:
ready for use
under current
location: rehein north-rhine-westphalia
dimensions: 970 x 850 x 1,070 mm
weight: 1 t
availability: immediately
terms of delivery: from site
terms of payment: 100% prior to removal/loading THICKNESS PLANER (530 MM) SMA-REF-6410 CATEGORY: THICKNESS PLANER MANUFACTURER: SAC TYPE: RS 530 YEAR OF CONSTRUCTION: 1982 MOTOR: 4 KW WORKSPACE: PLANING WIDTH: 530 MM PLANING HEIGHT: 240 MM SPECIAL FEATURES: 4-DRUM ELECTR. HEIGHT ADJUSTMENT CONDITION: READY FOR USE UNDER CURRENT LOCATION: REHEIN NORTH-RHINE-WESTPHALIA DIMENSIONS: 970 X 850 X 1,070 MM WEIGHT: 1 T AVAILABILITY: IMMEDIATELY TERMS OF DELIVERY: FROM SITE TERMS OF PAYMENT: 100% PRIOR TO REMOVAL/LOADING
Vendedor: S-MA GmbH
Año de construcción: usado
Precio: 10.900 €
Ubicación: Land-; gross weight [kg]: 7070; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7070; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-demag crane 3.2 t with radio remote control and scale
manufacturer: demag cranes & components gmbh
year of construction: 1992
capacity: 3.2 t
span crane: 16300 mm
number d. wheels crane: 4 pcs.
number d. wheels cat: 4 pcs.
operation mode: radio control
additional equipment: built-in scale

DEMAG CRANE 3.2 T WITH RADIO REMOTE CONTROL AND SCALE MANUFACTURER: DEMAG CRANES & COMPONENTS GMBH YEAR OF CONSTRUCTION: 1992 CAPACITY: 3.2 T SPAN CRANE: 16300 MM NUMBER D. WHEELS CRANE: 4 PCS. NUMBER D. WHEELS CAT: 4 PCS. OPERATION MODE: RADIO CONTROL ADDITIONAL EQUIPMENT: BUILT-IN SCALE
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 6570 kg<br/>throat: 2070/1170 mm<br/>boring diameter: 50/65 mm<br/>dimensions (l x w x h) approx.: 5740 x 4540 x 3440 mm<br/>bed plate surface area: 2610 x 1050 x 260 mm<br/>turning speed range: 16 - 800 rpm<br/>spindle taper: morse 5 <br/>feed range: 0,05 - 0,5 mm/r<br/>description: <h3>kovosvit vom 50 radial drilling machine</h3> <br> - machine no.: 150220020<br> <u>technical data:</u><br> <br> <h3>main dimensions:</h3> <br> - largest/smallest outreach from the shell surface to the spindle axis: 2070/1170 mm<br> - largest/smallest radius at spindle limit positions: 2270/1370 mm<br> - largest/smallest ground clearance of the spindle head in vertical position (with inserted spindle): 1555/305 mm<br> - carriage track on the bed guide: 1200 mm<br> - sheath diameter: 400 mm<br> <br> <h3>spindle:</h3> <br> - spindle head diameter: 75 mm<br> - spindle cone: morse 5<br> - spindle stroke: 350 mm<br> - number of spindle speed steps: 15<br> - highest spindle torque: 450 nm<br> <br> <h3>drive:</h3> <br> - drilling motor (power/speed): 4/1425 kw/n. min/-1<br> - hoist motor: 2.2/1420 kw/n. min/-1<br> - sledge travel motor: 1.1/1420 kw/n. min/-1<br> - total power consumption of the machine: 13 kva<br> WEIGHT APPROX.: 6570 KG
THROAT: 2070/1170 MM
BORING DIAMETER: 50/65 MM
DIMENSIONS (L X W X H) APPROX.: 5740 X 4540 X 3440 MM
BED PLATE SURFACE AREA: 2610 X 1050 X 260 MM
TURNING SPEED RANGE: 16 - 800 RPM
SPINDLE TAPER: MORSE 5
FEED RANGE: 0,05 - 0,5 MM/R
DESCRIPTION:

KOVOSVIT VOM 50 RADIAL DRILLING MACHINE


- MACHINE NO.: 150220020
TECHNICAL DATA:

MAIN DIMENSIONS:


- LARGEST/SMALLEST OUTREACH FROM THE SHELL SURFACE TO THE SPINDLE AXIS: 2070/1170 MM
- LARGEST/SMALLEST RADIUS AT SPINDLE LIMIT POSITIONS: 2270/1370 MM
- LARGEST/SMALLEST GROUND CLEARANCE OF THE SPINDLE HEAD IN VERTICAL POSITION (WITH INSERTED SPINDLE): 1555/305 MM
- CARRIAGE TRACK ON THE BED GUIDE: 1200 MM
- SHEATH DIAMETER: 400 MM

SPINDLE:


- SPINDLE HEAD DIAMETER: 75 MM
- SPINDLE CONE: MORSE 5
- SPINDLE STROKE: 350 MM
- NUMBER OF SPINDLE SPEED STEPS: 15
- HIGHEST SPINDLE TORQUE: 450 NM

DRIVE:


- DRILLING MOTOR (POWER/SPEED): 4/1425 KW/N. MIN/-1
- HOIST MOTOR: 2.2/1420 KW/N. MIN/-1
- SLEDGE TRAVEL MOTOR: 1.1/1420 KW/N. MIN/-1
- TOTAL POWER CONSUMPTION OF THE MACHINE: 13 KVA
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gildemeister mehrspindeldrehautomat
6- spindler
typ as 48-6

abgreifeinrichtung
rückwertige bearbeitung
spaenefoerderer
iemca pra lademagazin

oelnebelabscheider GILDEMEISTER MEHRSPINDELDREHAUTOMAT 6- SPINDLER TYP AS 48-6 ABGREIFEINRICHTUNG RüCKWERTIGE BEARBEITUNG SPAENEFOERDERER IEMCA PRA LADEMAGAZIN OELNEBELABSCHEIDER
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-weight approx.: 900 kg<br/>dimensions (l x w x h) approx.: 7500 x 1200 x 1500 mm<br/>description: bercar programmable cutting-off machine<br> serial number 07055<br> automatic feeding system for cutting pieces<br> cut from 45 ° - 90 ° - 135 °<br> feeding transfer length 4000 mm<br> minimum cutting length (at 90°): 1 mm<br> maximum cutting width 250 mm<br> maximum cutting height 100 mm<br> output transfer length of 2500 mm, with lateral pusher<br> cutting motor power of the 5.5 hp<br> total installed power 7.5 hp<br> pneumatic pressure: 7 kg<br> gradual adjustment of the cutting head<br> subjection on both sides<br> programming console with keyboard for introduction and modification of measurements<br> ce standards WEIGHT APPROX.: 900 KG
DIMENSIONS (L X W X H) APPROX.: 7500 X 1200 X 1500 MM
DESCRIPTION: BERCAR PROGRAMMABLE CUTTING-OFF MACHINE
SERIAL NUMBER 07055
AUTOMATIC FEEDING SYSTEM FOR CUTTING PIECES
CUT FROM 45 ° - 90 ° - 135 °
FEEDING TRANSFER LENGTH 4000 MM
MINIMUM CUTTING LENGTH (AT 90°): 1 MM
MAXIMUM CUTTING WIDTH 250 MM
MAXIMUM CUTTING HEIGHT 100 MM
OUTPUT TRANSFER LENGTH OF 2500 MM, WITH LATERAL PUSHER
CUTTING MOTOR POWER OF THE 5.5 HP
TOTAL INSTALLED POWER 7.5 HP
PNEUMATIC PRESSURE: 7 KG
GRADUAL ADJUSTMENT OF THE CUTTING HEAD
SUBJECTION ON BOTH SIDES
PROGRAMMING CONSOLE WITH KEYBOARD FOR INTRODUCTION AND MODIFICATION OF MEASUREMENTS
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 17.300 €
Ubicación: Land-panel saw striebig compact 6207 vertical

little used
section 5350 x 2070 x 60 mm
saw blade 250 mm, score, 48 teeth
before scoring saw unit continuously
dig. measuring system, y-axis
built in 2008

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 

 PANEL SAW STRIEBIG COMPACT 6207 VERTICAL LITTLE USED SECTION 5350 X 2070 X 60 MM SAW BLADE 250 MM, SCORE, 48 TEETH BEFORE SCORING SAW UNIT CONTINUOUSLY DIG. MEASURING SYSTEM, Y-AXIS BUILT IN 2008 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 30 €
Ubicación: Land-weight approx.: 3,6 kg<br/>dimensions (l x w x h) approx.: 150x500x100 mm<br/>description: 2 pieces, steel 120 mm, wood 250 mm, n=0-2500/min, 1010w WEIGHT APPROX.: 3,6 KG
DIMENSIONS (L X W X H) APPROX.: 150X500X100 MM
DESCRIPTION: 2 PIECES, STEEL 120 MM, WOOD 250 MM, N=0-2500/MIN, 1010W
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 32.950 €
Ubicación: Land-honeycomb/cassettes used for warehouse, matthiessen, 2-bladed version, total 840 cassettes - -:
 
price from site: â?¬32.950.-(net), excluding disassembly, transport, etc.!
 
manufacturer: matthiessen anlagenbau gmbh
type: rfz type apos
construction number (year): 02 / 88
 
system: 2-bladed version
number of honeycomb/cassettes: 840 cassettes, 420 cartridges left wing, 420 cartridges right wing.
dimensions wing: 20 x 8 metres, about 9 meters high.
construction of a grand piano: 14 cassettes high, 30 cassettes long - first 4
vertical lines of ã  14 cassette "small", then 6 vertical rows ã  14
cassette "large", then again 20 vertical rows of ã  14 cassettes 'small'.
at the end of the wing support elements.
honeycomb/cassette "small" dimensions: h b 440 x 500 x l approx. 8000 mm
honeycomb/cassette "big" dimensions: h b 550 x 630 x l approx. 8000 mm
maximum subject load per honeycomb/cassette: probably 3,000 kg
all cassettes with roller roller cassette input.
 
central storage and retrieval unit between the wings, procedure bar rail, max 1500 kp and 3000 kp.
solenoid/battery magnet mannesmann demag type dbm 34, 2,000 kg.
leuze electronic photocell system.
integrated crane (operated by joystick) with 2 hoists and crossbeams.
transport system with drop table.
30 meters can run rails in the floor ripped out and the new
site are cast again.
 
leading delivery table, firmly mounted, electric chain drive,
to promote material on table of the central unit.
base tray 8 x 8 meters.
 
in addition to selected storage space left and right, as well as barriers of
total investment are part of the offer.
total area: 40.00 x 24.00 m
available as of now.
control unit siemens 3ve6201-4cs11zur electronic order processing
condition: used
available: available now
location: room berlin HONEYCOMB/CASSETTES USED FOR WAREHOUSE, MATTHIESSEN, 2-BLADED VERSION, TOTAL 840 CASSETTES - -: PRICE FROM SITE: &ACIRC;?&NOT;32.950.-(NET), EXCLUDING DISASSEMBLY, TRANSPORT, ETC.! MANUFACTURER: MATTHIESSEN ANLAGENBAU GMBH TYPE: RFZ TYPE APOS CONSTRUCTION NUMBER (YEAR): 02 / 88 SYSTEM: 2-BLADED VERSION NUMBER OF HONEYCOMB/CASSETTES: 840 CASSETTES, 420 CARTRIDGES LEFT WING, 420 CARTRIDGES RIGHT WING. DIMENSIONS WING: 20 X 8 METRES, ABOUT 9 METERS HIGH. CONSTRUCTION OF A GRAND PIANO: 14 CASSETTES HIGH, 30 CASSETTES LONG - FIRST 4 VERTICAL LINES OF &ATILDE;&NBSP; 14 CASSETTE "SMALL", THEN 6 VERTICAL ROWS &ATILDE;&NBSP; 14 CASSETTE "LARGE", THEN AGAIN 20 VERTICAL ROWS OF &ATILDE;&NBSP; 14 CASSETTES 'SMALL'. AT THE END OF THE WING SUPPORT ELEMENTS. HONEYCOMB/CASSETTE "SMALL" DIMENSIONS: H B 440 X 500 X L APPROX. 8000 MM HONEYCOMB/CASSETTE "BIG" DIMENSIONS: H B 550 X 630 X L APPROX. 8000 MM MAXIMUM SUBJECT LOAD PER HONEYCOMB/CASSETTE: PROBABLY 3,000 KG ALL CASSETTES WITH ROLLER ROLLER CASSETTE INPUT. CENTRAL STORAGE AND RETRIEVAL UNIT BETWEEN THE WINGS, PROCEDURE BAR RAIL, MAX 1500 KP AND 3000 KP. SOLENOID/BATTERY MAGNET MANNESMANN DEMAG TYPE DBM 34, 2,000 KG. LEUZE ELECTRONIC PHOTOCELL SYSTEM. INTEGRATED CRANE (OPERATED BY JOYSTICK) WITH 2 HOISTS AND CROSSBEAMS. TRANSPORT SYSTEM WITH DROP TABLE. 30 METERS CAN RUN RAILS IN THE FLOOR RIPPED OUT AND THE NEW SITE ARE CAST AGAIN. LEADING DELIVERY TABLE, FIRMLY MOUNTED, ELECTRIC CHAIN DRIVE, TO PROMOTE MATERIAL ON TABLE OF THE CENTRAL UNIT. BASE TRAY 8 X 8 METERS. IN ADDITION TO SELECTED STORAGE SPACE LEFT AND RIGHT, AS WELL AS BARRIERS OF TOTAL INVESTMENT ARE PART OF THE OFFER. TOTAL AREA: 40.00 X 24.00 M AVAILABLE AS OF NOW. CONTROL UNIT SIEMENS 3VE6201-4CS11ZUR ELECTRONIC ORDER PROCESSING CONDITION: USED AVAILABLE: AVAILABLE NOW LOCATION: ROOM BERLIN
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-weight approx.: 4340 kg<br/>running hours: 16194 h<br/>loading capacity: 3000 t<br/>lifting bridge: duplex <br/>lifting height: 3605 m<br/>fork length of fork lift: 1200 m<br/>overall height: 2500 m<br/>dimensions (l x w x h) approx.: 2500 x 1200 x 2500 mm<br/>description: <u><b>yale glp30vx v2445 lpg forklift</b></u> <br> - type: glp30vx v2445<br> - year of construction: 2011<br> - serial number: b875b21326j<br> <br> - lifting capacity: 3000 kg<br> - lifting height: 3605 mm<br> - fork lenght: 1200 mm<br> - integrated side shift: 1070 mm<br> - rated output: 38 kw<br> - working hours: 16194<br> WEIGHT APPROX.: 4340 KG
RUNNING HOURS: 16194 H
LOADING CAPACITY: 3000 T
LIFTING BRIDGE: DUPLEX
LIFTING HEIGHT: 3605 M
FORK LENGTH OF FORK LIFT: 1200 M
OVERALL HEIGHT: 2500 M
DIMENSIONS (L X W X H) APPROX.: 2500 X 1200 X 2500 MM
DESCRIPTION: YALE GLP30VX V2445 LPG FORKLIFT
- TYPE: GLP30VX V2445
- YEAR OF CONSTRUCTION: 2011
- SERIAL NUMBER: B875B21326J

- LIFTING CAPACITY: 3000 KG
- LIFTING HEIGHT: 3605 MM
- FORK LENGHT: 1200 MM
- INTEGRATED SIDE SHIFT: 1070 MM
- RATED OUTPUT: 38 KW
- WORKING HOURS: 16194
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-diesel generator power plant 106 mw with wartsila 7x18v46 hfo
 
this 106 mw power plant was delivered by wartsila in year 2000, operation started in 2001 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated from 50700 to 69000 hours in base load power production this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works are carried out strictly in accordance with wartsila manuals, 60 000 hour maintenance is carried out to 3 units. no any unexpected breakdowns has happened. delivery contains complete functioning power plant with 110 kv switchyard, buildings and day tank yard. power plant is currently in standby mode, in excellent condition it has all service records and complete original documentation available at site.
 
main plant characteristics at current site conditions:
 
net power output at site: 106 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
shaft output: iso 16 290 kwm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
 
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c
internal electric consump: 2.5 % at full load, up to 4% at low load   DIESEL GENERATOR POWER PLANT 106 MW WITH WARTSILA 7X18V46 HFO THIS 106 MW POWER PLANT WAS DELIVERED BY WARTSILA IN YEAR 2000, OPERATION STARTED IN 2001 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED FROM 50700 TO 69000 HOURS IN BASE LOAD POWER PRODUCTION THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS ARE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS, 60 000 HOUR MAINTENANCE IS CARRIED OUT TO 3 UNITS. NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT WITH 110 KV SWITCHYARD, BUILDINGS AND DAY TANK YARD. POWER PLANT IS CURRENTLY IN STANDBY MODE, IN EXCELLENT CONDITION IT HAS ALL SERVICE RECORDS AND COMPLETE ORIGINAL DOCUMENTATION AVAILABLE AT SITE. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: NET POWER OUTPUT AT SITE: 106 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM SHAFT OUTPUT: ISO 16 290 KWM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C INTERNAL ELECTRIC CONSUMP: 2.5 % AT FULL LOAD, UP TO 4% AT LOW LOAD
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-weight approx.: 4910 kg<br/>loading capacity: 2230 t<br/>lifting height: 5665 m<br/>fork length of fork lift: 1200 m<br/>overall height: 2700 m<br/>dimensions (l x w x h) approx.: 2500 x 1200 x 2700 mm<br/>description: <u><b>yale gdp30vx e2645 diesel forklift</b></u> <br> - type: gdp30vx e2645<br> - year of construction: 2011<br> - serial number: b875b23033j<br> <br> - lifting capacity: 2230 kg<br> - lifting height: 5665 mm<br> - fork lenght: 1200 mm<br> - integrated side shift: 1070 mm<br> - rated output: 48,5 kw<br> - working hours: 5846<br> WEIGHT APPROX.: 4910 KG
LOADING CAPACITY: 2230 T
LIFTING HEIGHT: 5665 M
FORK LENGTH OF FORK LIFT: 1200 M
OVERALL HEIGHT: 2700 M
DIMENSIONS (L X W X H) APPROX.: 2500 X 1200 X 2700 MM
DESCRIPTION: YALE GDP30VX E2645 DIESEL FORKLIFT
- TYPE: GDP30VX E2645
- YEAR OF CONSTRUCTION: 2011
- SERIAL NUMBER: B875B23033J

- LIFTING CAPACITY: 2230 KG
- LIFTING HEIGHT: 5665 MM
- FORK LENGHT: 1200 MM
- INTEGRATED SIDE SHIFT: 1070 MM
- RATED OUTPUT: 48,5 KW
- WORKING HOURS: 5846
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones one way 54.000 bph
 
complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. it was delivered by krones in year 2000 and it was in operation till 2015 and is currently installed and powered. equipment is very well maintaned and it has a complete techncial documentation in english.
 
main characteristics
- capacity 54 000 bph at 0.33 liter bottles
- made by krones in year 2000, in operation till 2015 still installed
- bottle volumes 275, 330 ml and earlier also 660 ml bottles
- total operating hours approx 70.000
- one way line for new glass bottles
- secondary packaging kisters wraparound packer and khs innopac wsp a-m combi packer
- operation controls made with siemens simatic s7 plc system
- overall line efficiency 75 %

list of main equipment:

1. empty bottle pallet transport conveyor system, kensal, year 2010
2. empty bottle depalletiser, kettner pressant universal
- capacity 100 pallets / hour
- layer interleave removal device
- empty pallet stacking device, type 454, model lpmt with max 15 pallet magazine
- empty pallet transport conveyor system
3. empty bottle transport conveyors (mass flow), krones
4. empty bottle transport conveyors/reject lane (single file), krones
5. zero pressure single filer, krones
6. empty bottle inspector krones linatronic
7. filler monobloc (rinser-filler-capper) krones mecafill vk(2v)cf
- short tube filling system for beer and soft drinks with double pre-evacuation before filling
- 132 filling valves, two maxicrown (year 2007) 26 capping stations, one for crown and one for twist off caps
- maxicrown cap feeding system
- inbuilt monoblock cip system
- valve block with buffer tank
- change parts for all bottles sizes
8. full bottle transport conveyor system (filler - pasteuriser), krones
9. full bottle inspector krones checkmat type 707 with swing-push rejection
10. tunnel pasteuriser, sander hansen pb 17.9-504-42, machine number 622
- it has 7 zones total, 4 pasteurization and 3 regerative zones
- total process area 240 m2
- the pasteurizer was refurbished one year ago and it has new martahoon plastic betls and new gear drives.
11. full bottle transport conveyor system (pasteuriser - labellers), krones
12. two bottle driers (air knives)
13. two labelers krones solomatic 018-g88
- combined output between 54.000 bph
- cold glue system, both with two label stations for ready cut paper labels
- rotation l-r and r-l (oposite directions)
- inbuilt no-label checking and rejecting system
- bottle handling change parts and storage racks for parts
14. bottle marking system with
- two videojet inc date coders, model xl 170i uhs af (one for each labeler)
- two domino lazer marker, model dpx1500 digital (one for each labeler)
- two domino digital coder 3, model ddc3l, year 2010 (one for each labeler)
15. two label inspectors, krones checkmat type 707 (one for each line)
16. full bottle transport conveyor system (labelers - kisters) incl. labeler reject conveyor
17. wraparound packer khs kisters innopac wp 070v, year 2005, 70 cycle per min, various configurations with automatic carton feeding system
18. full bottle transport conveyor system (feeding loose bottles to kister combi)
19. khs combi packer, type innopac wsp a-m, year 2011, machine number k-89403431- 000100, max 58 cycles/min, with automatic carton feeding system
20. two finished pack coders, type videojet
21. two lock & pop device made by nordson, in year 2010
22. finished pack transport conveyors
23. finished pack transport spiral elevator made by ambaflex in 2000
24. related electrical control and mcc panels   GLASS BOTTLE FILLING LINE KRONES ONE WAY 54.000 BPH COMPLETE LINE FOR BOTTLING BEER, CARBONATED AND NON CARBONATED SOFT DRINKS IN ONE WAY GLASS BOTTLES AT NOMINAL CAPACITY OF 54 000 BPH. IT WAS DELIVERED BY KRONES IN YEAR 2000 AND IT WAS IN OPERATION TILL 2015 AND IS CURRENTLY INSTALLED AND POWERED. EQUIPMENT IS VERY WELL MAINTANED AND IT HAS A COMPLETE TECHNCIAL DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS - CAPACITY 54 000 BPH AT 0.33 LITER BOTTLES - MADE BY KRONES IN YEAR 2000, IN OPERATION TILL 2015 STILL INSTALLED - BOTTLE VOLUMES 275, 330 ML AND EARLIER ALSO 660 ML BOTTLES - TOTAL OPERATING HOURS APPROX 70.000 - ONE WAY LINE FOR NEW GLASS BOTTLES - SECONDARY PACKAGING KISTERS WRAPAROUND PACKER AND KHS INNOPAC WSP A-M COMBI PACKER - OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM - OVERALL LINE EFFICIENCY 75 % LIST OF MAIN EQUIPMENT: 1. EMPTY BOTTLE PALLET TRANSPORT CONVEYOR SYSTEM, KENSAL, YEAR 2010 2. EMPTY BOTTLE DEPALLETISER, KETTNER PRESSANT UNIVERSAL - CAPACITY 100 PALLETS / HOUR - LAYER INTERLEAVE REMOVAL DEVICE - EMPTY PALLET STACKING DEVICE, TYPE 454, MODEL LPMT WITH MAX 15 PALLET MAGAZINE - EMPTY PALLET TRANSPORT CONVEYOR SYSTEM 3. EMPTY BOTTLE TRANSPORT CONVEYORS (MASS FLOW), KRONES 4. EMPTY BOTTLE TRANSPORT CONVEYORS/REJECT LANE (SINGLE FILE), KRONES 5. ZERO PRESSURE SINGLE FILER, KRONES 6. EMPTY BOTTLE INSPECTOR KRONES LINATRONIC 7. FILLER MONOBLOC (RINSER-FILLER-CAPPER) KRONES MECAFILL VK(2V)CF - SHORT TUBE FILLING SYSTEM FOR BEER AND SOFT DRINKS WITH DOUBLE PRE-EVACUATION BEFORE FILLING - 132 FILLING VALVES, TWO MAXICROWN (YEAR 2007) 26 CAPPING STATIONS, ONE FOR CROWN AND ONE FOR TWIST OFF CAPS - MAXICROWN CAP FEEDING SYSTEM - INBUILT MONOBLOCK CIP SYSTEM - VALVE BLOCK WITH BUFFER TANK - CHANGE PARTS FOR ALL BOTTLES SIZES 8. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FILLER - PASTEURISER), KRONES 9. FULL BOTTLE INSPECTOR KRONES CHECKMAT TYPE 707 WITH SWING-PUSH REJECTION 10. TUNNEL PASTEURISER, SANDER HANSEN PB 17.9-504-42, MACHINE NUMBER 622 - IT HAS 7 ZONES TOTAL, 4 PASTEURIZATION AND 3 REGERATIVE ZONES - TOTAL PROCESS AREA 240 M2 - THE PASTEURIZER WAS REFURBISHED ONE YEAR AGO AND IT HAS NEW MARTAHOON PLASTIC BETLS AND NEW GEAR DRIVES. 11. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (PASTEURISER - LABELLERS), KRONES 12. TWO BOTTLE DRIERS (AIR KNIVES) 13. TWO LABELERS KRONES SOLOMATIC 018-G88 - COMBINED OUTPUT BETWEEN 54.000 BPH - COLD GLUE SYSTEM, BOTH WITH TWO LABEL STATIONS FOR READY CUT PAPER LABELS - ROTATION L-R AND R-L (OPOSITE DIRECTIONS) - INBUILT NO-LABEL CHECKING AND REJECTING SYSTEM - BOTTLE HANDLING CHANGE PARTS AND STORAGE RACKS FOR PARTS 14. BOTTLE MARKING SYSTEM WITH - TWO VIDEOJET INC DATE CODERS, MODEL XL 170I UHS AF (ONE FOR EACH LABELER) - TWO DOMINO LAZER MARKER, MODEL DPX1500 DIGITAL (ONE FOR EACH LABELER) - TWO DOMINO DIGITAL CODER 3, MODEL DDC3L, YEAR 2010 (ONE FOR EACH LABELER) 15. TWO LABEL INSPECTORS, KRONES CHECKMAT TYPE 707 (ONE FOR EACH LINE) 16. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (LABELERS - KISTERS) INCL. LABELER REJECT CONVEYOR 17. WRAPAROUND PACKER KHS KISTERS INNOPAC WP 070V, YEAR 2005, 70 CYCLE PER MIN, VARIOUS CONFIGURATIONS WITH AUTOMATIC CARTON FEEDING SYSTEM 18. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FEEDING LOOSE BOTTLES TO KISTER COMBI) 19. KHS COMBI PACKER, TYPE INNOPAC WSP A-M, YEAR 2011, MACHINE NUMBER K-89403431- 000100, MAX 58 CYCLES/MIN, WITH AUTOMATIC CARTON FEEDING SYSTEM 20. TWO FINISHED PACK CODERS, TYPE VIDEOJET 21. TWO LOCK & POP DEVICE MADE BY NORDSON, IN YEAR 2010 22. FINISHED PACK TRANSPORT CONVEYORS 23. FINISHED PACK TRANSPORT SPIRAL ELEVATOR MADE BY AMBAFLEX IN 2000 24. RELATED ELECTRICAL CONTROL AND MCC PANELS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-weight approx.: 4620 kg<br/>running hours: 15334 h<br/>loading capacity: 2820 t<br/>lifting height: 4615 m<br/>fork length of fork lift: 1200 m<br/>overall height: 2300 m<br/>dimensions (l x w x h) approx.: 2500 x 1200 x 2300 mm<br/>description: <u><b>yale gdp30vx e2195 diesel forklift</b></u> <br> - type: gdp30vx e2195<br> - year of construction: 2014<br> - serial number: b875b26135m<br> <br> - lifting capacity: 2820 kg<br> - lifting height: 4615 mm<br> - fork lenght: 1100 mm<br> - integrated side shift: 1070 mm<br> - rated output: 33,9 kw<br> - working hours: 15334<br> WEIGHT APPROX.: 4620 KG
RUNNING HOURS: 15334 H
LOADING CAPACITY: 2820 T
LIFTING HEIGHT: 4615 M
FORK LENGTH OF FORK LIFT: 1200 M
OVERALL HEIGHT: 2300 M
DIMENSIONS (L X W X H) APPROX.: 2500 X 1200 X 2300 MM
DESCRIPTION: YALE GDP30VX E2195 DIESEL FORKLIFT
- TYPE: GDP30VX E2195
- YEAR OF CONSTRUCTION: 2014
- SERIAL NUMBER: B875B26135M

- LIFTING CAPACITY: 2820 KG
- LIFTING HEIGHT: 4615 MM
- FORK LENGHT: 1100 MM
- INTEGRATED SIDE SHIFT: 1070 MM
- RATED OUTPUT: 33,9 KW
- WORKING HOURS: 15334
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine demag dnc ii 175

this demag injection molding machine was a testing machine in a petrochemical factory and afterwards it served several years as a training machine in a local technical university. the machine is used in laboratory test production and training purposes only, not in actual production ever. we dismantled it in 2008 and took it to our warehouse where it is today. it looks to be in good condition.

technical description:
manufacturer: mannesmann demag kunstofftechnik, germany
type: m-type demag dnc ii 175
year: 1981 – very little used
screw diameter: 52 mm, 16d
clamping force: 1750kn
injection volume: 380 cm3
control: microprocessor control system
measurements: 6.6 x 1.5 x 2.2 m (lxwxh)
weight: 7.800 kg
condition: very good – operational
typical products: pipe fittings, house hold articles, technical products   INJECTION MOLDING MACHINE DEMAG DNC II 175 THIS DEMAG INJECTION MOLDING MACHINE WAS A TESTING MACHINE IN A PETROCHEMICAL FACTORY AND AFTERWARDS IT SERVED SEVERAL YEARS AS A TRAINING MACHINE IN A LOCAL TECHNICAL UNIVERSITY. THE MACHINE IS USED IN LABORATORY TEST PRODUCTION AND TRAINING PURPOSES ONLY, NOT IN ACTUAL PRODUCTION EVER. WE DISMANTLED IT IN 2008 AND TOOK IT TO OUR WAREHOUSE WHERE IT IS TODAY. IT LOOKS TO BE IN GOOD CONDITION. TECHNICAL DESCRIPTION: MANUFACTURER: MANNESMANN DEMAG KUNSTOFFTECHNIK, GERMANY TYPE: M-TYPE DEMAG DNC II 175 YEAR: 1981 – VERY LITTLE USED SCREW DIAMETER: 52 MM, 16D CLAMPING FORCE: 1750KN INJECTION VOLUME: 380 CM3 CONTROL: MICROPROCESSOR CONTROL SYSTEM MEASUREMENTS: 6.6 X 1.5 X 2.2 M (LXWXH) WEIGHT: 7.800 KG CONDITION: VERY GOOD – OPERATIONAL TYPICAL PRODUCTS: PIPE FITTINGS, HOUSE HOLD ARTICLES, TECHNICAL PRODUCTS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-section steel shears, profile shears, punch, punching machine, punch<br /><br />-pressure force 40 to<br />-hydraulisch<br />-stamping<br />-scissors<br />-to cut<br />-ausklinken<br />-footswitch<br />-div. punching tools<br />-dimensions 1070/1000 / h1630 mm<br />-weight 862 kg SECTION STEEL SHEARS, PROFILE SHEARS, PUNCH, PUNCHING MACHINE, PUNCH

-PRESSURE FORCE 40 TO
-HYDRAULISCH
-STAMPING
-SCISSORS
-TO CUT
-AUSKLINKEN
-FOOTSWITCH
-DIV. PUNCHING TOOLS
-DIMENSIONS 1070/1000 / H1630 MM
-WEIGHT 862 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-closing force: 80t, weight: 3.7t, operational hours: 20,000h.  CLOSING FORCE: 80T, WEIGHT: 3.7T, OPERATIONAL HOURS: 20,000H.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 13.900 €
Ubicación: Land-; gross weight [kg]: 18000; transmission: sonstige; front tyre size: 385/65r22.5; rear tyre size: 385/65r22.5; accessories: abs; colour: weiß; suspension type: luft/luft; cargo space dimensions [lxbxh]: 7200x2480x1000; max payload [kg]: 14070 ; GROSS WEIGHT [KG]: 18000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 385/65R22.5; REAR TYRE SIZE: 385/65R22.5; ACCESSORIES: ABS; COLOUR: WEIß; SUSPENSION TYPE: LUFT/LUFT; CARGO SPACE DIMENSIONS [LXBXH]: 7200X2480X1000; MAX PAYLOAD [KG]: 14070
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 2.750 €
Ubicación: Land-ostas round bending machine

type sbm 1070 x 95

-capaciteit 1070 x 3 mm
-walsen conisch
-bovenrol wegdraaibare
-voetbediening
-noodstop
-documentatie
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) OSTAS ROUND BENDING MACHINE TYPE SBM 1070 X 95 -CAPACITEIT 1070 X 3 MM -WALSEN CONISCH -BOVENROL WEGDRAAIBARE -VOETBEDIENING -NOODSTOP -DOCUMENTATIE -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Ubicación: Land-weight max:    0.5 t<br/>stroke:   4000 mm<br/>clamping width:        mm<br/>--------------------------------------------------:  <br/>working range -crane-:  <br/>- capacity:    500 kg<br/>- throat depth:   4000 mm<br/>electrical specifications:  <br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- height above floor level:   4050 mm<br/><br/><br/><br/><br/> WEIGHT MAX: 0.5 T
STROKE: 4000 MM
CLAMPING WIDTH: MM
--------------------------------------------------:
WORKING RANGE -CRANE-:
- CAPACITY: 500 KG
- THROAT DEPTH: 4000 MM
ELECTRICAL SPECIFICATIONS:
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- HEIGHT ABOVE FLOOR LEVEL: 4050 MM




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-keg filling unit for 5 liter party - keg, semiautomatic esau hueber 110 kph
 
this keg filler is semiautomatic with 3 filling heads, handtmann mms micro filtration system and cap closing unit manufactured in 2007 and hardy used and it was dismantled in year 2012 - the equipment was in excellent condition when dismantled professionally and placed in a container. the line has filling capacity of 110 kegs / hour. the empty and clean keg is placed manually onto filler and lifted manually back to the transport belt once filled. the sensor recognizes placed keg and starts filling automatically, a probe sensor in return air channel controls the filling level. the equipment purges kegs with co2 for air removal and them pressurizes the keg. the beer valve and return valve are opened simultaneously and the keg will be filled from bottom to top. once filled, the kegs will moved to closing unit and further along the transport belt ready for packaging. beer filling system includes micro filtration system for for high efficiency separation of particles and microorganism by multi-layer filter sheets made of cellulose and diatomaceous.
 
manufacturer: esau & hueber gmbh, germany
made in year: 2007
capacity: 110 pieces of 5 litres kegs / hour
filling unit: esau & hueber semi-fill with 3 filling heads
cap closing unit: esau & hueber ser semiautomatic
beer filtration: handtmann mms 070 - capacity 30 hl / h
control system: siemens simatic s7-300   KEG FILLING UNIT FOR 5 LITER PARTY - KEG, SEMIAUTOMATIC ESAU HUEBER 110 KPH THIS KEG FILLER IS SEMIAUTOMATIC WITH 3 FILLING HEADS, HANDTMANN MMS MICRO FILTRATION SYSTEM AND CAP CLOSING UNIT MANUFACTURED IN 2007 AND HARDY USED AND IT WAS DISMANTLED IN YEAR 2012 - THE EQUIPMENT WAS IN EXCELLENT CONDITION WHEN DISMANTLED PROFESSIONALLY AND PLACED IN A CONTAINER. THE LINE HAS FILLING CAPACITY OF 110 KEGS / HOUR. THE EMPTY AND CLEAN KEG IS PLACED MANUALLY ONTO FILLER AND LIFTED MANUALLY BACK TO THE TRANSPORT BELT ONCE FILLED. THE SENSOR RECOGNIZES PLACED KEG AND STARTS FILLING AUTOMATICALLY, A PROBE SENSOR IN RETURN AIR CHANNEL CONTROLS THE FILLING LEVEL. THE EQUIPMENT PURGES KEGS WITH CO2 FOR AIR REMOVAL AND THEM PRESSURIZES THE KEG. THE BEER VALVE AND RETURN VALVE ARE OPENED SIMULTANEOUSLY AND THE KEG WILL BE FILLED FROM BOTTOM TO TOP. ONCE FILLED, THE KEGS WILL MOVED TO CLOSING UNIT AND FURTHER ALONG THE TRANSPORT BELT READY FOR PACKAGING. BEER FILLING SYSTEM INCLUDES MICRO FILTRATION SYSTEM FOR FOR HIGH EFFICIENCY SEPARATION OF PARTICLES AND MICROORGANISM BY MULTI-LAYER FILTER SHEETS MADE OF CELLULOSE AND DIATOMACEOUS. MANUFACTURER: ESAU & HUEBER GMBH, GERMANY MADE IN YEAR: 2007 CAPACITY: 110 PIECES OF 5 LITRES KEGS / HOUR FILLING UNIT: ESAU & HUEBER SEMI-FILL WITH 3 FILLING HEADS CAP CLOSING UNIT: ESAU & HUEBER SER SEMIAUTOMATIC BEER FILTRATION: HANDTMANN MMS 070 - CAPACITY 30 HL / H CONTROL SYSTEM: SIEMENS SIMATIC S7-300
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-: 15-150 m/min<br/>dimensions of saw-band: 3700x27x0,9 mm<br/>capacity 90 degrees: round: 260 mm<br/>capacity 90 degrees: flat: 300x260 mm<br/>: 20 mm<br/>: 100 mm<br/>: 100 mm<br/>: 200 mm<br/>: Ø 260 / 300x260 mm<br/>min. dia.: 5 mm<br/>work height max.: 750 mm<br/>total power requirement: 1,5 kw<br/>weight: 1050 kg<br/>dimensions: 2150x1650x1850 mm<br/><br/><br/><br/><br/> : 15-150 M/MIN
DIMENSIONS OF SAW-BAND: 3700X27X0,9 MM
CAPACITY 90 DEGREES: ROUND: 260 MM
CAPACITY 90 DEGREES: FLAT: 300X260 MM
: 20 MM
: 100 MM
: 100 MM
: 200 MM
: Ø 260 / 300X260 MM
MIN. DIA.: 5 MM
WORK HEIGHT MAX.: 750 MM
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT: 1050 KG
DIMENSIONS: 2150X1650X1850 MM




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-oil free screw air compressor atlas-copco zr 250 with mb 600 desiccant dryer
 
the compressor is water cooled and totally oil free two stage screw compressor with inter- and after coolers. package includes also md adsorption dryer for out let air which don't need any external energy (purge air). the equipment is a sound canopy and it is controlled with advanced eletronikon control system. the compressor in good operational condition, it has ce marking and it is still installed and can be tested. running video available
 
technical data
manufactured by: atlas copco belgium
made in year: 1997
type: zr 250
serial number: atf 053886
total operation hours: 64200
loaded hours: 50700
capacity (fad): 37.7 m3/min at 10.0 bar
electric motor: 250 kw
compressor rotating speed: 1485 rpm
air dryer: atlas-copco md 600, sr no aio 009885
compressor dimensions: 4.34 x 2.00 x 1.65 m (l x h x w)
weight - compressor 5360 kg   OIL FREE SCREW AIR COMPRESSOR ATLAS-COPCO ZR 250 WITH MB 600 DESICCANT DRYER THE COMPRESSOR IS WATER COOLED AND TOTALLY OIL FREE TWO STAGE SCREW COMPRESSOR WITH INTER- AND AFTER COOLERS. PACKAGE INCLUDES ALSO MD ADSORPTION DRYER FOR OUT LET AIR WHICH DON'T NEED ANY EXTERNAL ENERGY (PURGE AIR). THE EQUIPMENT IS A SOUND CANOPY AND IT IS CONTROLLED WITH ADVANCED ELETRONIKON CONTROL SYSTEM. THE COMPRESSOR IN GOOD OPERATIONAL CONDITION, IT HAS CE MARKING AND IT IS STILL INSTALLED AND CAN BE TESTED. RUNNING VIDEO AVAILABLE TECHNICAL DATA MANUFACTURED BY: ATLAS COPCO BELGIUM MADE IN YEAR: 1997 TYPE: ZR 250 SERIAL NUMBER: ATF 053886 TOTAL OPERATION HOURS: 64200 LOADED HOURS: 50700 CAPACITY (FAD): 37.7 M3/MIN AT 10.0 BAR ELECTRIC MOTOR: 250 KW COMPRESSOR ROTATING SPEED: 1485 RPM AIR DRYER: ATLAS-COPCO MD 600, SR NO AIO 009885 COMPRESSOR DIMENSIONS: 4.34 X 2.00 X 1.65 M (L X H X W) WEIGHT - COMPRESSOR 5360 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-weight max.: 1000 kg.<br/>stroke: 4000 mm<br/>stroke speed: 7,5/15 m/min<br/>fine feed: 3,8/1,9 m/min<br/>total power requirement: 1,5/0,35 kw<br/><br/><br/><br/><br/> WEIGHT MAX.: 1000 KG.
STROKE: 4000 MM
STROKE SPEED: 7,5/15 M/MIN
FINE FEED: 3,8/1,9 M/MIN
TOTAL POWER REQUIREMENT: 1,5/0,35 KW




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-closing force: 2000kn, injection pressure: 1946bar, screw diameter: 50mm, max. opening stroke: 570/ 1235mm, ejection stroke: 178mm, weight: 10.95t.  CLOSING FORCE: 2000KN, INJECTION PRESSURE: 1946BAR, SCREW DIAMETER: 50MM, MAX. OPENING STROKE: 570/ 1235MM, EJECTION STROKE: 178MM, WEIGHT: 10.95T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 220 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 3000 x 800 x 500 mm<br/>description: load capacity 250 kg, chain hoist load capacity 125 kg, jib length approx. 3000 mm WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 800 X 500 MM
DESCRIPTION: LOAD CAPACITY 250 KG, CHAIN HOIST LOAD CAPACITY 125 KG, JIB LENGTH APPROX. 3000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-closing force: 2500kn, injection pressure: 1946bar, screw diameter: 50mm, max. opening stroke: 675mm, ejection stroke: 200mm, weight: 12.6t.  CLOSING FORCE: 2500KN, INJECTION PRESSURE: 1946BAR, SCREW DIAMETER: 50MM, MAX. OPENING STROKE: 675MM, EJECTION STROKE: 200MM, WEIGHT: 12.6T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 600 €
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 10000 x 2000 x 1000 mm<br/>description: load capacity 2000 kg, range approx. 10000 mm, with pedestrian control WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 10000 X 2000 X 1000 MM
DESCRIPTION: LOAD CAPACITY 2000 KG, RANGE APPROX. 10000 MM, WITH PEDESTRIAN CONTROL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-stock number: 3283
fork truck
manufacturer: hedin, type: el-mover
machine no.: 280704, year: 2011

specifications: gr. lifting capacity 20000 kg
total power of 4 kw
                			max speed 46m / min self-propelled sprayer.
                			lift height 200 mm radio controlled length: 5755 mm, height: width: 4736 mm, weight: 8000 kg

STOCK NUMBER: 3283 FORK TRUCK MANUFACTURER: HEDIN, TYPE: EL-MOVER MACHINE NO.: 280704, YEAR: 2011 SPECIFICATIONS: GR. LIFTING CAPACITY 20000 KG TOTAL POWER OF 4 KW MAX SPEED 46M / MIN SELF-PROPELLED SPRAYER. LIFT HEIGHT 200 MM RADIO CONTROLLED LENGTH: 5755 MM, HEIGHT: WIDTH: 4736 MM, WEIGHT: 8000 KG
Vendedor: DenTool LTD
Año de construcción: usado
Precio: used machinery auction RESALE 195 €
Ubicación: Land-weight approx.: 180 kg<br/>dimensions (l x w x h) approx.: 4000 x 800 x 500 mm<br/>description: load capacity 250 kg, chain hoist load capacity 125 kg, jib length approx. 4000 mm WEIGHT APPROX.: 180 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 800 X 500 MM
DESCRIPTION: LOAD CAPACITY 250 KG, CHAIN HOIST LOAD CAPACITY 125 KG, JIB LENGTH APPROX. 4000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gcm10/3+1-08-30-27+9-nw-cr
gc: gyrocompact (stackable carpet without structure)
m10: carpet 1 meter wide
3 + 1: 3 evaporators running, defrosting 1 (allows to work 24/24 non-stop)
08: height of 80 mm (height available 65 mm) bank
30: number of turns 30
27 + 9: 27000 m² of surface area + 9000 m² of reserve
nw: north west location (when you are in front of the freezer input down to the left, output on the right side at the top.)
cr: rotation in the clockwise direction.

technical details

carpet:
-height of 80 mm bank
-available height 65 mm
-number of turns 30
-type of tape frigobelt w
-total width 1070 mm
-1040 mm useful width
-length by whorl 20.5 m
-surface by whorl 17.5 m²
-speed of 3.5a 30 m/min

electricity:
-3 x 380 v, 50 hz
-total power output 81 kw
-maximum peak 123.5 kva

data of refrigeration
-4 evaporators
-by evaporator 92 kw
-79100 kcal/h by evaporator

data of deicing
-defrost water
-consumption by defrosting cycle 360 l/min
-mini water 15 ° c temperature

operating noise
-maximum 80 dba dimensions
-length 14000 mm
-width 8000 mm
-height 4800 mm

year of commissioning
-2009

the co²-powered freezer
all stainless steel
 plc siemens s7 control.
 electric control stainless steel cabinet, stainless steel power (for the fan) cabinet, wardrobe of liquid circulation of heating to the ground (stainless steel)
 cip cleaning station
 automatic lubrication station
 circulation for the floor pump

equipment in perfect working order regularly maintained by jbt (maintenance agreement) GCM10/3+1-08-30-27+9-NW-CR GC: GYROCOMPACT (STACKABLE CARPET WITHOUT STRUCTURE) M10: CARPET 1 METER WIDE 3 + 1: 3 EVAPORATORS RUNNING, DEFROSTING 1 (ALLOWS TO WORK 24/24 NON-STOP) 08: HEIGHT OF 80 MM (HEIGHT AVAILABLE 65 MM) BANK 30: NUMBER OF TURNS 30 27 + 9: 27000 M² OF SURFACE AREA + 9000 M² OF RESERVE NW: NORTH WEST LOCATION (WHEN YOU ARE IN FRONT OF THE FREEZER INPUT DOWN TO THE LEFT, OUTPUT ON THE RIGHT SIDE AT THE TOP.) CR: ROTATION IN THE CLOCKWISE DIRECTION. TECHNICAL DETAILS CARPET: -HEIGHT OF 80 MM BANK -AVAILABLE HEIGHT 65 MM -NUMBER OF TURNS 30 -TYPE OF TAPE FRIGOBELT W -TOTAL WIDTH 1070 MM -1040 MM USEFUL WIDTH -LENGTH BY WHORL 20.5 M -SURFACE BY WHORL 17.5 M² -SPEED OF 3.5A 30 M/MIN ELECTRICITY: -3 X 380 V, 50 HZ -TOTAL POWER OUTPUT 81 KW -MAXIMUM PEAK 123.5 KVA DATA OF REFRIGERATION -4 EVAPORATORS -BY EVAPORATOR 92 KW -79100 KCAL/H BY EVAPORATOR DATA OF DEICING -DEFROST WATER -CONSUMPTION BY DEFROSTING CYCLE 360 L/MIN -MINI WATER 15 ° C TEMPERATURE OPERATING NOISE -MAXIMUM 80 DBA DIMENSIONS -LENGTH 14000 MM -WIDTH 8000 MM -HEIGHT 4800 MM YEAR OF COMMISSIONING -2009 THE CO²-POWERED FREEZER ALL STAINLESS STEEL PLC SIEMENS S7 CONTROL. ELECTRIC CONTROL STAINLESS STEEL CABINET, STAINLESS STEEL POWER (FOR THE FAN) CABINET, WARDROBE OF LIQUID CIRCULATION OF HEATING TO THE GROUND (STAINLESS STEEL) CIP CLEANING STATION AUTOMATIC LUBRICATION STATION CIRCULATION FOR THE FLOOR PUMP EQUIPMENT IN PERFECT WORKING ORDER REGULARLY MAINTAINED BY JBT (MAINTENANCE AGREEMENT)
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 5000 x 2700 x 1000 mm<br/>description: range approx. 5000 mm, load capacity 3000 kg, with pedestrian control WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2700 X 1000 MM
DESCRIPTION: RANGE APPROX. 5000 MM, LOAD CAPACITY 3000 KG, WITH PEDESTRIAN CONTROL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit
-glue joint scraper
-schwabbelaggregat

power contraol pc 22

technical data:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

amenities:
-workpiece support scissor design kal
210/6
-workpiece thickness 60 mm site. 40 mm
-workpiece thickness 8 mm kal200/300/kfl500
-order unit pu (changeable
-qa glue container front piece (removable)
-automation package chamfer/radius
kal210/6/a20
-vertical double roll keying
-work guide for fk device
i change head set for form milling fk
-i india radius cutter set r = 1,5-3 mm ambition
-detergent spraying unit top/bottom
ambition
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT POWER CONTRAOL PC 22 TECHNICAL DATA: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK11 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 7755 MM -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; AMENITIES: -WORKPIECE SUPPORT SCISSOR DESIGN KAL 210/6 -WORKPIECE THICKNESS 60 MM SITE. 40 MM -WORKPIECE THICKNESS 8 MM KAL200/300/KFL500 -ORDER UNIT PU (CHANGEABLE -QA GLUE CONTAINER FRONT PIECE (REMOVABLE) -AUTOMATION PACKAGE CHAMFER/RADIUS KAL210/6/A20 -VERTICAL DOUBLE ROLL KEYING -WORK GUIDE FOR FK DEVICE I CHANGE HEAD SET FOR FORM MILLING FK -I INDIA RADIUS CUTTER SET R = 1,5-3 MM AMBITION -DETERGENT SPRAYING UNIT TOP/BOTTOM AMBITION
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 650 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 5000 x 2200 x 1000 mm<br/>description: load capacity 2000 kg, range approx. 5000 mm, with pedestrian control WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2200 X 1000 MM
DESCRIPTION: LOAD CAPACITY 2000 KG, RANGE APPROX. 5000 MM, WITH PEDESTRIAN CONTROL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fully automatic angle welder /.
fully automated page welding machine
manufacturer: diez
type: aws-c 9070-cs
year of construction: 2018

operating side: in the running direction left
band-width: 600 mm
clearance height: approx. 190 mm
welding length: approx. 900 mm
working height / belt height a-spout: approx. 860 mm + 100
capacity: up to 30 cycles / min (depending on the package size and feed speed)
supply voltage: 230v ac, 50 hz, 1 ph + n + pe
power consumption: 3,5 kw
nominal current: 10 a
with cable and 16a schuko plug
compressed air supply: 6 bar

external dimensions:
length: 2600 mm
width: 2000 mm
height: 1500 mm

description:
this packaging machine automatically packaged products of all kinds in foil. it is with this automatically to wrap fully automatic angle welding to be quite small and large products.

the welding stamp guarantees extremely stable side seams for all slides. the processing of the film via the 3-sided welding of a half tube slide (feinschrumpf - or pe shrink film). the product length is automatically detected via sensors.

high operating and service friendliness
very robust and long-lasting mechanical engineering
for fine polyolefin shrink films and ldpe films without convert
duration-heated sealing system with low maintenance teflon coating
needle perforation can be switched on if necessary
quick switch to simple us between different products
photo cell vertically and horizontally
pneumatic welding frame lock
very low-noise operation
painting ral 5012
machine new (vorfã¼hrmaschine)
 FULLY AUTOMATIC ANGLE WELDER /. FULLY AUTOMATED PAGE WELDING MACHINE MANUFACTURER: DIEZ TYPE: AWS-C 9070-CS YEAR OF CONSTRUCTION: 2018 OPERATING SIDE: IN THE RUNNING DIRECTION LEFT BAND-WIDTH: 600 MM CLEARANCE HEIGHT: APPROX. 190 MM WELDING LENGTH: APPROX. 900 MM WORKING HEIGHT / BELT HEIGHT A-SPOUT: APPROX. 860 MM + 100 CAPACITY: UP TO 30 CYCLES / MIN (DEPENDING ON THE PACKAGE SIZE AND FEED SPEED) SUPPLY VOLTAGE: 230V AC, 50 HZ, 1 PH + N + PE POWER CONSUMPTION: 3,5 KW NOMINAL CURRENT: 10 A WITH CABLE AND 16A SCHUKO PLUG COMPRESSED AIR SUPPLY: 6 BAR EXTERNAL DIMENSIONS: LENGTH: 2600 MM WIDTH: 2000 MM HEIGHT: 1500 MM DESCRIPTION: THIS PACKAGING MACHINE AUTOMATICALLY PACKAGED PRODUCTS OF ALL KINDS IN FOIL. IT IS WITH THIS AUTOMATICALLY TO WRAP FULLY AUTOMATIC ANGLE WELDING TO BE QUITE SMALL AND LARGE PRODUCTS. THE WELDING STAMP GUARANTEES EXTREMELY STABLE SIDE SEAMS FOR ALL SLIDES. THE PROCESSING OF THE FILM VIA THE 3-SIDED WELDING OF A HALF TUBE SLIDE (FEINSCHRUMPF - OR PE SHRINK FILM). THE PRODUCT LENGTH IS AUTOMATICALLY DETECTED VIA SENSORS. HIGH OPERATING AND SERVICE FRIENDLINESS VERY ROBUST AND LONG-LASTING MECHANICAL ENGINEERING FOR FINE POLYOLEFIN SHRINK FILMS AND LDPE FILMS WITHOUT CONVERT DURATION-HEATED SEALING SYSTEM WITH LOW MAINTENANCE TEFLON COATING NEEDLE PERFORATION CAN BE SWITCHED ON IF NECESSARY QUICK SWITCH TO SIMPLE US BETWEEN DIFFERENT PRODUCTS PHOTO CELL VERTICALLY AND HORIZONTALLY PNEUMATIC WELDING FRAME LOCK VERY LOW-NOISE OPERATION PAINTING RAL 5012 MACHINE NEW (VORF&ATILDE;&FRAC14;HRMASCHINE)
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 220 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 4200 x 800 x 500 mm<br/>description: load capacity 250 kg, chain hoist load capacity 125 kg, jib length approx. 4000 mm WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 4200 X 800 X 500 MM
DESCRIPTION: LOAD CAPACITY 250 KG, CHAIN HOIST LOAD CAPACITY 125 KG, JIB LENGTH APPROX. 4000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fully automatic angle welder /.
fully automated page welding machine
manufacturer: diez
type: aws-c 9070-cs
year of constr.: 2017

operating side: in the running direction left
band-width: 600 mm
clearance height: approx. 190 mm
welding length: approx. 900 mm
working height / belt height a-spout: approx. 860 mm + 100
capacity: up to 30 cycles / min (depending on the package size and feed speed)
supply voltage: 230v ac, 50 hz, 1 ph + n + pe
power consumption: 3,5 kw
nominal current: 10 a
with cable and 16a schuko plug
compressed air supply: 6 bar

external dimensions:
length: 2600 mm
width: 2000 mm
height: 1500 mm

description:
this packaging machine automatically packaged products of all kinds in foil. it is with this automatically to wrap fully automatic angle welding to be quite small and large products.

the welding stamp guarantees extremely stable side seams for all slides. the processing of the film via the 3-sided welding of a half tube slide (feinschrumpf - or pe shrink film). the product length is automatically detected via sensors.
ideal for packaging for car mats, textiles.

high operating and service friendliness
very robust and long-lasting mechanical engineering
for fine polyolefin shrink films and ldpe films without convert
duration-heated sealing system with low-maintenance teflon coating
needle perforation can be switched on if necessary
simple fast switching between different products
photo cell vertically and horizontally
pneumatic welding frame lock
very low-noise operation
painting ral 5012
 FULLY AUTOMATIC ANGLE WELDER /. FULLY AUTOMATED PAGE WELDING MACHINE MANUFACTURER: DIEZ TYPE: AWS-C 9070-CS YEAR OF CONSTR.: 2017 OPERATING SIDE: IN THE RUNNING DIRECTION LEFT BAND-WIDTH: 600 MM CLEARANCE HEIGHT: APPROX. 190 MM WELDING LENGTH: APPROX. 900 MM WORKING HEIGHT / BELT HEIGHT A-SPOUT: APPROX. 860 MM + 100 CAPACITY: UP TO 30 CYCLES / MIN (DEPENDING ON THE PACKAGE SIZE AND FEED SPEED) SUPPLY VOLTAGE: 230V AC, 50 HZ, 1 PH + N + PE POWER CONSUMPTION: 3,5 KW NOMINAL CURRENT: 10 A WITH CABLE AND 16A SCHUKO PLUG COMPRESSED AIR SUPPLY: 6 BAR EXTERNAL DIMENSIONS: LENGTH: 2600 MM WIDTH: 2000 MM HEIGHT: 1500 MM DESCRIPTION: THIS PACKAGING MACHINE AUTOMATICALLY PACKAGED PRODUCTS OF ALL KINDS IN FOIL. IT IS WITH THIS AUTOMATICALLY TO WRAP FULLY AUTOMATIC ANGLE WELDING TO BE QUITE SMALL AND LARGE PRODUCTS. THE WELDING STAMP GUARANTEES EXTREMELY STABLE SIDE SEAMS FOR ALL SLIDES. THE PROCESSING OF THE FILM VIA THE 3-SIDED WELDING OF A HALF TUBE SLIDE (FEINSCHRUMPF - OR PE SHRINK FILM). THE PRODUCT LENGTH IS AUTOMATICALLY DETECTED VIA SENSORS. IDEAL FOR PACKAGING FOR CAR MATS, TEXTILES. HIGH OPERATING AND SERVICE FRIENDLINESS VERY ROBUST AND LONG-LASTING MECHANICAL ENGINEERING FOR FINE POLYOLEFIN SHRINK FILMS AND LDPE FILMS WITHOUT CONVERT DURATION-HEATED SEALING SYSTEM WITH LOW-MAINTENANCE TEFLON COATING NEEDLE PERFORATION CAN BE SWITCHED ON IF NECESSARY SIMPLE FAST SWITCHING BETWEEN DIFFERENT PRODUCTS PHOTO CELL VERTICALLY AND HORIZONTALLY PNEUMATIC WELDING FRAME LOCK VERY LOW-NOISE OPERATION PAINTING RAL 5012
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 220 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 4200 x 800 x 500 mm<br/>description: load capacity 250 kg, chain hoist load capacity 125 kg, jib length approx. 4000 mm WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 4200 X 800 X 500 MM
DESCRIPTION: LOAD CAPACITY 250 KG, CHAIN HOIST LOAD CAPACITY 125 KG, JIB LENGTH APPROX. 4000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand rewinder
mfc.:	demag, bbc	built:	1967	operation speed:	max. 500 m/min.	
strip width:	690 - 1600 mm			thickness:	0.32 – 3.0  mm
edging width:		max. 2 x 60 mm		min. 2 x 3.5  mm
coil od:		1850 mm max.		coil weight:	30 t max.
consist of:	de-coiler	feeding device & driver	strip tension measurement unit
crop shear	damping roll	strip control unit 	edging shear		
scrap coiler	strip thickness measurement 	oiling machine	coiler
 QTY. 1 SECOND-HAND REWINDER MFC.: DEMAG, BBC BUILT: 1967 OPERATION SPEED: MAX. 500 M/MIN. STRIP WIDTH: 690 - 1600 MM THICKNESS: 0.32 – 3.0 MM EDGING WIDTH: MAX. 2 X 60 MM MIN. 2 X 3.5 MM COIL OD: 1850 MM MAX. COIL WEIGHT: 30 T MAX. CONSIST OF: DE-COILER FEEDING DEVICE & DRIVER STRIP TENSION MEASUREMENT UNIT CROP SHEAR DAMPING ROLL STRIP CONTROL UNIT EDGING SHEAR SCRAP COILER STRIP THICKNESS MEASUREMENT OILING MACHINE COILER
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 140 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 3100 x 800 x 600 mm<br/>description: load capacity chain hoist 125 kg, length approx. 3000 mm WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 3100 X 800 X 600 MM
DESCRIPTION: LOAD CAPACITY CHAIN HOIST 125 KG, LENGTH APPROX. 3000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand skin pass rolling mill
mfc.:	demag, siemens		type:	4-hi mill	built:	1953
modified:	1967, 1983	work roll driven through pinion gear – dc motor
strip width:	700 – 1610 mm	thickness:	0.3 – 3.5 mm (0.4-3.0)
coil od:		max. 1850 mm	coil weight:		max. 32 t
rolling speed:		800 m/min.		roll force:		max. 1200 t
working roll dia.:	425 – 465 mm		back-up roll dia.:	1200 – 1275 mm
scope of supply:	de-coiler		roll cleaning unit	roll stand 
	coiler		weighing device	welding unit
 QTY. 1 SECOND-HAND SKIN PASS ROLLING MILL MFC.: DEMAG, SIEMENS TYPE: 4-HI MILL BUILT: 1953 MODIFIED: 1967, 1983 WORK ROLL DRIVEN THROUGH PINION GEAR – DC MOTOR STRIP WIDTH: 700 – 1610 MM THICKNESS: 0.3 – 3.5 MM (0.4-3.0) COIL OD: MAX. 1850 MM COIL WEIGHT: MAX. 32 T ROLLING SPEED: 800 M/MIN. ROLL FORCE: MAX. 1200 T WORKING ROLL DIA.: 425 – 465 MM BACK-UP ROLL DIA.: 1200 – 1275 MM SCOPE OF SUPPLY: DE-COILER ROLL CLEANING UNIT ROLL STAND COILER WEIGHING DEVICE WELDING UNIT
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 1.800 €
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 9000 x 2500 x 1100 mm<br/>description: load capacity 5 t, with pedestrian control, range approx. 8000 mm WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 9000 X 2500 X 1100 MM
DESCRIPTION: LOAD CAPACITY 5 T, WITH PEDESTRIAN CONTROL, RANGE APPROX. 8000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand reversing cold rolling mill
mfc.:	demag & siemens		type:	4-hi reversing mill	built:	1953
modified:	1967/68, 1988			strip width:		1590 mm
strip thickness:	entry:	1.7 – 4.5 mm	exit thickness:	0.32 – 3.5 mm
main drive:	dc motors	roll force:		1800 t max. 		
coil od:		1850 mm			coil weight: 	30 t max.
working roll dia.:	425 – 465 mm		back-up roll dia.:	1300-1420 mm
operation speed:	600 m/min.		strip tension:		35.0 t
consist of:	coil storage	double cone reel  coiler & decoilers	roll stand
	gauge measurement & control (hydr. adjusting)		tucking roll
 QTY. 1 SECOND-HAND REVERSING COLD ROLLING MILL MFC.: DEMAG & SIEMENS TYPE: 4-HI REVERSING MILL BUILT: 1953 MODIFIED: 1967/68, 1988 STRIP WIDTH: 1590 MM STRIP THICKNESS: ENTRY: 1.7 – 4.5 MM EXIT THICKNESS: 0.32 – 3.5 MM MAIN DRIVE: DC MOTORS ROLL FORCE: 1800 T MAX. COIL OD: 1850 MM COIL WEIGHT: 30 T MAX. WORKING ROLL DIA.: 425 – 465 MM BACK-UP ROLL DIA.: 1300-1420 MM OPERATION SPEED: 600 M/MIN. STRIP TENSION: 35.0 T CONSIST OF: COIL STORAGE DOUBLE CONE REEL COILER & DECOILERS ROLL STAND GAUGE MEASUREMENT & CONTROL (HYDR. ADJUSTING) TUCKING ROLL
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 3500 x 800 x 600 mm<br/>description: chain hoist pk 2 n-f, load capacity 250 kg, length in total approx. 3000 mm WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 800 X 600 MM
DESCRIPTION: CHAIN HOIST PK 2 N-F, LOAD CAPACITY 250 KG, LENGTH IN TOTAL APPROX. 3000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	
	-drilling capacity in steel st 60 30 mm
	-spindle mount mt 3
	-drilling spindle stroke 125 mm
	-spindle speed of continuously variable 80 - 3200 rpm
	-possibility of thread cutting through re - / left rotation up to m 20
	-throat depth 260 mm
	-maximum distance table - spindle 825 mm
	-table with 2 t-slots 500 x 360 mm
	-height-adjustable via rack and pinion with hand crank
	-drive: 400 v / 0.8 / 1.5 kw
	-space requirement approx.	                 b 500 x h 1900 x h 950 mm
	-weight approx.					  	  230 kg
	-with: - chuck 3 - 13 mm
				-20 st. bohrer 5-20 mm
 TECHNICAL DATA: -DRILLING CAPACITY IN STEEL ST 60 30 MM -SPINDLE MOUNT MT 3 -DRILLING SPINDLE STROKE 125 MM -SPINDLE SPEED OF CONTINUOUSLY VARIABLE 80 - 3200 RPM -POSSIBILITY OF THREAD CUTTING THROUGH RE - / LEFT ROTATION UP TO M 20 -THROAT DEPTH 260 MM -MAXIMUM DISTANCE TABLE - SPINDLE 825 MM -TABLE WITH 2 T-SLOTS 500 X 360 MM -HEIGHT-ADJUSTABLE VIA RACK AND PINION WITH HAND CRANK -DRIVE: 400 V / 0.8 / 1.5 KW -SPACE REQUIREMENT APPROX. B 500 X H 1900 X H 950 MM -WEIGHT APPROX. 230 KG -WITH: - CHUCK 3 - 13 MM -20 ST. BOHRER 5-20 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 190 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 5000 x 800 x 700 mm<br/>description: load capacity chain hoist 0.25 t, with pedestrian control, jib length approx. 4000 mm WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 800 X 700 MM
DESCRIPTION: LOAD CAPACITY CHAIN HOIST 0.25 T, WITH PEDESTRIAN CONTROL, JIB LENGTH APPROX. 4000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: demag cranes & components gmbh
year of construction: 2008
weight of the crane: 13 t
of it by weight. d. cat: 1.37 t
capacity: 12,5 t
span crane: 22605 mm
laufraddurchm. crane: 250 mm
laufraddurchm. cat: 160 mm
number d. wheels crane: 8 pieces
number d. wheels cat: 4 pcs.
operation mode: radio control
type cat / main hub: ezdr-pro 10-12.5 6.1 6.7 z 6
additional equipment: built-in scale
 MANUFACTURER: DEMAG CRANES & COMPONENTS GMBH YEAR OF CONSTRUCTION: 2008 WEIGHT OF THE CRANE: 13 T OF IT BY WEIGHT. D. CAT: 1.37 T CAPACITY: 12,5 T SPAN CRANE: 22605 MM LAUFRADDURCHM. CRANE: 250 MM LAUFRADDURCHM. CAT: 160 MM NUMBER D. WHEELS CRANE: 8 PIECES NUMBER D. WHEELS CAT: 4 PCS. OPERATION MODE: RADIO CONTROL TYPE CAT / MAIN HUB: EZDR-PRO 10-12.5 6.1 6.7 Z 6 ADDITIONAL EQUIPMENT: BUILT-IN SCALE
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 190 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 3500 x 800 x 600 mm<br/>description: load capacity chain hoist 125 kg, csa type 4 WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 800 X 600 MM
DESCRIPTION: LOAD CAPACITY CHAIN HOIST 125 KG, CSA TYPE 4
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)