2113 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-1 qty. 13 second-hand bell annealing furnaces
mfc.:	matthias ludwig 	type:	hugf185-320	built:	1954 – 1965
modernisation in 1967	modification to h2 in 1990	2-4 coils/base		
no. of base:	26	base relationship:	1 : 2.0	annealing temp.: 620-700 °c
coil dia.:	1850 mm	max. stack height:	3200 mm
2 qty. 13 second-hand bell annealing furnaces
mfc.:	matthias ludwig 	type:	hugf185-390	built:	1956 – 1988
modernisation in 1970	modification to h2 in 1990	2-4 coils/base		
no. of base:	30	base relationship:	1 : 2.3	annealing temp.:  620-700 °c
coil od dia.:	1850 mm	max. stack height:	3900 mm
3 qty. 5 second-hand bell annealing furnaces
mfc.:	loi	type:	hugf 185-420 hph		built:	1987
no. of base:	3	coil od dia.:	1850 mm		max. stack height:4200 mm
charge weight:	75 t		annealing temp.:	620 – 700 °c
 1 QTY. 13 SECOND-HAND BELL ANNEALING FURNACES MFC.: MATTHIAS LUDWIG TYPE: HUGF185-320 BUILT: 1954 – 1965 MODERNISATION IN 1967 MODIFICATION TO H2 IN 1990 2-4 COILS/BASE NO. OF BASE: 26 BASE RELATIONSHIP: 1 : 2.0 ANNEALING TEMP.: 620-700 °C COIL DIA.: 1850 MM MAX. STACK HEIGHT: 3200 MM 2 QTY. 13 SECOND-HAND BELL ANNEALING FURNACES MFC.: MATTHIAS LUDWIG TYPE: HUGF185-390 BUILT: 1956 – 1988 MODERNISATION IN 1970 MODIFICATION TO H2 IN 1990 2-4 COILS/BASE NO. OF BASE: 30 BASE RELATIONSHIP: 1 : 2.3 ANNEALING TEMP.: 620-700 °C COIL OD DIA.: 1850 MM MAX. STACK HEIGHT: 3900 MM 3 QTY. 5 SECOND-HAND BELL ANNEALING FURNACES MFC.: LOI TYPE: HUGF 185-420 HPH BUILT: 1987 NO. OF BASE: 3 COIL OD DIA.: 1850 MM MAX. STACK HEIGHT:4200 MM CHARGE WEIGHT: 75 T ANNEALING TEMP.: 620 – 700 °C
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: 10.900 €
Ubicación: Land-; gross weight [kg]: 7749; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7749; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-control system :	
sinumeric 840d without shop turn	
turning over bed: 535 mm	
turning over carriage: 290 mm	
turning diameter: 180 mm	
spindle bore: 51 (76) mm	
spindle speeds: 60-6000 rpm	
tool changer positions: 12	
spindle passage: max Ø 58 mm	
machine dimensions:	
2800 x 1505 x 1920 mm	
machine weight: 4300 kg	
accessories:	
feeder magazine spacesaver:	
2200 s a18- Ø 6 - 65 length 1000 mm	
container of the cooling liquid	
cooling 7 bar	
chip conveyor	
cylinder- smw-autoblok vnk 150/67	
sets of collets	
availability: 30.03.2019   CONTROL SYSTEM : SINUMERIC 840D WITHOUT SHOP TURN TURNING OVER BED: 535 MM TURNING OVER CARRIAGE: 290 MM TURNING DIAMETER: 180 MM SPINDLE BORE: 51 (76) MM SPINDLE SPEEDS: 60-6000 RPM TOOL CHANGER POSITIONS: 12 SPINDLE PASSAGE: MAX Ø 58 MM MACHINE DIMENSIONS: 2800 X 1505 X 1920 MM MACHINE WEIGHT: 4300 KG ACCESSORIES: FEEDER MAGAZINE SPACESAVER: 2200 S A18- Ø 6 - 65 LENGTH 1000 MM CONTAINER OF THE COOLING LIQUID COOLING 7 BAR CHIP CONVEYOR CYLINDER- SMW-AUTOBLOK VNK 150/67 SETS OF COLLETS AVAILABILITY: 30.03.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: 68.500 €
Ubicación: Land-; power [ps]: 246; front tyre size: 650/75-32; rear tyre size: 480/80-28; accessories: ertrags- und feuchtigkeitsmessung, motorhersteller:john deere, schüttleranzahl (6 stck.), bordcomputer / monitor, durchsatzkontrolle, häcksler, haspelhorizontalverstellung, hydrostatischer antrieb, kabine, reversiereinrichtung, verlustmessung, feuchtemess ; POWER [PS]: 246; FRONT TYRE SIZE: 650/75-32; REAR TYRE SIZE: 480/80-28; ACCESSORIES: ERTRAGS- UND FEUCHTIGKEITSMESSUNG, MOTORHERSTELLER:JOHN DEERE, SCHüTTLERANZAHL (6 STCK.), BORDCOMPUTER / MONITOR, DURCHSATZKONTROLLE, HäCKSLER, HASPELHORIZONTALVERSTELLUNG, HYDROSTATISCHER ANTRIEB, KABINE, REVERSIEREINRICHTUNG, VERLUSTMESSUNG, FEUCHTEMESS
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-we offer one endoscope, one vidoe casing richard wolf tvc 21 and one light source richard wolf tlx-2 xenon, including documentation.  WE OFFER ONE ENDOSCOPE, ONE VIDOE CASING RICHARD WOLF TVC 21 AND ONE LIGHT SOURCE RICHARD WOLF TLX-2 XENON, INCLUDING DOCUMENTATION.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-weight approx.: 3860 kg<br/>dimensions (l x w x h) approx.: 1200 x 2700 x 2200 mm<br/>description: maximum wheel diameter 267 mm. maximum hight 102 mm. maximum pressure 225 ton. oil suply-machine capacity 1000 lts WEIGHT APPROX.: 3860 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 2700 X 2200 MM
DESCRIPTION: MAXIMUM WHEEL DIAMETER 267 MM. MAXIMUM HIGHT 102 MM. MAXIMUM PRESSURE 225 TON. OIL SUPLY-MACHINE CAPACITY 1000 LTS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-operating hours: 19559 h	
spindle hours: 11921 h	
control system:	
3d heidenhain itnc 530	
5 axes	
travel distances:	
x: 750 mm	
y: 650 mm	
z: 560 mm	
a: +120° / -120°	
c: 360°	
swivelling rotary table:	
table: ø 650 / in 800 × 650 mm	
max. load weight: 600 kg	
main drive: speed 18000 rpm	
tool magazine:	
tool holder sk40 / hsk-a63	
linear axes (x / y / z):	
feed 40000 mm/min	
accessories:	
double-tool change system	
table c-axis: Ø 650 mm	
coolant 500 ml	
infrared probe heidenhain ts 649	
chip conveyor with 600 l refrigerant unit	
paper band filter	
cooling emulsion 40 bar / 23 l / min	
chip flushing in the cabin door	
detergent gun with pump	
electronic handwheel itnc 530	
machine dimensions:	
3567 x 2650 x 2900 mm	
machine weight: 9900 kg OPERATING HOURS: 19559 H SPINDLE HOURS: 11921 H CONTROL SYSTEM: 3D HEIDENHAIN ITNC 530 5 AXES TRAVEL DISTANCES: X: 750 MM Y: 650 MM Z: 560 MM A: +120° / -120° C: 360° SWIVELLING ROTARY TABLE: TABLE: ø 650 / IN 800 × 650 MM MAX. LOAD WEIGHT: 600 KG MAIN DRIVE: SPEED 18000 RPM TOOL MAGAZINE: TOOL HOLDER SK40 / HSK-A63 LINEAR AXES (X / Y / Z): FEED 40000 MM/MIN ACCESSORIES: DOUBLE-TOOL CHANGE SYSTEM TABLE C-AXIS: Ø 650 MM COOLANT 500 ML INFRARED PROBE HEIDENHAIN TS 649 CHIP CONVEYOR WITH 600 L REFRIGERANT UNIT PAPER BAND FILTER COOLING EMULSION 40 BAR / 23 L / MIN CHIP FLUSHING IN THE CABIN DOOR DETERGENT GUN WITH PUMP ELECTRONIC HANDWHEEL ITNC 530 MACHINE DIMENSIONS: 3567 X 2650 X 2900 MM MACHINE WEIGHT: 9900 KG
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-electronic control panel,\r\ntemperature range -20 ° bis + 50 ° c\r\ninside + outside stainless steel\r\ndimensions outside    t 2.960, b   1.220 mm, h 2.600  mm\r\n ELECTRONIC CONTROL PANEL,\R\NTEMPERATURE RANGE -20 ° BIS + 50 ° C\R\NINSIDE + OUTSIDE STAINLESS STEEL\R\NDIMENSIONS OUTSIDE T 2.960, B 1.220 MM, H 2.600 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-esterer sash gang hde 
used, good condition 
year of constr. 1981 

machine fully functional 
immediately available 
hydraulic width adjustment 

technical data: 
frame range 710 mm 
pass height 670 mm 
hub 500 mm 
max. 300 rpm
pulleys diameter 1000 mm 
pulley width 215 mm 
max. feeding unit 12m/min 
saw speed 5 / s

incl. chain conveyor 
mÖhringer passing switch 
outlet roller conveyor 

optional:
vollmer cutting machine 
various spare saw bands 

we sell for our customer. 
machinery ex location nearby bielefeld. 

used machines without guarantee. 
 ESTERER SASH GANG HDE USED, GOOD CONDITION YEAR OF CONSTR. 1981 MACHINE FULLY FUNCTIONAL IMMEDIATELY AVAILABLE HYDRAULIC WIDTH ADJUSTMENT TECHNICAL DATA: FRAME RANGE 710 MM PASS HEIGHT 670 MM HUB 500 MM MAX. 300 RPM PULLEYS DIAMETER 1000 MM PULLEY WIDTH 215 MM MAX. FEEDING UNIT 12M/MIN SAW SPEED 5 / S INCL. CHAIN CONVEYOR MÖHRINGER PASSING SWITCH OUTLET ROLLER CONVEYOR OPTIONAL: VOLLMER CUTTING MACHINE VARIOUS SPARE SAW BANDS WE SELL FOR OUR CUSTOMER. MACHINERY EX LOCATION NEARBY BIELEFELD. USED MACHINES WITHOUT GUARANTEE.
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: 4.750 €
Ubicación: Land-combi steamer

rational scc we 61

scc = selfcookingcenter

gr = whiteefficiency

intelligence meets efficiency: the selfcookingcenter of much more than a professional ovens which knows how to deal with heat and steam is rational: thanks to the innovative four assistants, meals are prepared faster and more accurately. cook will be one experience and the cleaning of the device a breeze. the rational selfcookingcenter 61 (scc 61) is high end in your kitchen.

technical data

dimensions: hxwxd = 167 x 89 x 89 cm
    frequency: 50-60 hz
    voltage: 3nac 400 v
    power: 11,0 kw
    year of construction: 2012

execution:

electric units
    body made of stainless steel
    water connection
    shower for the roll out under the door
    right-hinged door
    inclusive stainless steel base
    includes original instruction manual
    capacity: 6 x 1/1 gn or 12 x 1/2 gn
    operating with live steam from 30 to 130 degrees
    operation with hot air from 30 to 300 degrees
    combination of steam and hot air from 30 to 300 degrees
    eia price approx.: eur 10.995,-

the selfcookingcenter 61 (scc 61) covers 95 percent of all common cooking applications.

the profi - control technology ensures an exact, demand-driven supply of energy.

the integrated self-cleaning technology with automatic descaling ensures hygienic cleanness.

the scc also by unversiertem staff can be easy to use the tft display/touch screen.

the scc 61 protects your operating costs. 

see state & accessories, original images!

if you have questions, email or call.   COMBI STEAMER RATIONAL SCC WE 61 SCC = SELFCOOKINGCENTER GR = WHITEEFFICIENCY INTELLIGENCE MEETS EFFICIENCY: THE SELFCOOKINGCENTER OF MUCH MORE THAN A PROFESSIONAL OVENS WHICH KNOWS HOW TO DEAL WITH HEAT AND STEAM IS RATIONAL: THANKS TO THE INNOVATIVE FOUR ASSISTANTS, MEALS ARE PREPARED FASTER AND MORE ACCURATELY. COOK WILL BE ONE EXPERIENCE AND THE CLEANING OF THE DEVICE A BREEZE. THE RATIONAL SELFCOOKINGCENTER 61 (SCC 61) IS HIGH END IN YOUR KITCHEN. TECHNICAL DATA DIMENSIONS: HXWXD = 167 X 89 X 89 CM FREQUENCY: 50-60 HZ VOLTAGE: 3NAC 400 V POWER: 11,0 KW YEAR OF CONSTRUCTION: 2012 EXECUTION: ELECTRIC UNITS BODY MADE OF STAINLESS STEEL WATER CONNECTION SHOWER FOR THE ROLL OUT UNDER THE DOOR RIGHT-HINGED DOOR INCLUSIVE STAINLESS STEEL BASE INCLUDES ORIGINAL INSTRUCTION MANUAL CAPACITY: 6 X 1/1 GN OR 12 X 1/2 GN OPERATING WITH LIVE STEAM FROM 30 TO 130 DEGREES OPERATION WITH HOT AIR FROM 30 TO 300 DEGREES COMBINATION OF STEAM AND HOT AIR FROM 30 TO 300 DEGREES EIA PRICE APPROX.: EUR 10.995,- THE SELFCOOKINGCENTER 61 (SCC 61) COVERS 95 PERCENT OF ALL COMMON COOKING APPLICATIONS. THE PROFI - CONTROL TECHNOLOGY ENSURES AN EXACT, DEMAND-DRIVEN SUPPLY OF ENERGY. THE INTEGRATED SELF-CLEANING TECHNOLOGY WITH AUTOMATIC DESCALING ENSURES HYGIENIC CLEANNESS. THE SCC ALSO BY UNVERSIERTEM STAFF CAN BE EASY TO USE THE TFT DISPLAY/TOUCH SCREEN. THE SCC 61 PROTECTS YOUR OPERATING COSTS. SEE STATE & ACCESSORIES, ORIGINAL IMAGES! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: 4.980 €
Ubicación: Land-panel saw striebig 6220 av f automatic vertical

size: 530 x 220 cm
weight approx. 670 kg
l x w x h: 600 x 100 x 280 cm
year of construction 1980
without digital display
price from space

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12           PANEL SAW STRIEBIG 6220 AV F AUTOMATIC VERTICAL SIZE: 530 X 220 CM WEIGHT APPROX. 670 KG L X W X H: 600 X 100 X 280 CM YEAR OF CONSTRUCTION 1980 WITHOUT DIGITAL DISPLAY PRICE FROM SPACE THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-edge grinder rehnen-new-
type: junior r 1

engine power 2,2 kw speed 22 m / s belt size 2280 x 150 mm with band oscillating abrasive belt rear 850 x 150 mm swivelled 90 - 180 â°-table size 750 x 350 mm with plate on the deflection roller top with heavy cast iron with built-in  three-phase motor 380 v, 2.2 kw 2850 rpm the engine is equipped with built-in switch / plug combination; motor protection switch and main switch according to vde decaled dimensions of the rear wall of the sanding belt 850 x 150 mm which is belt rear wall with a graphite special coating steel table in the height by spring pressure adjustable tape measure 150 x 2280 mm is the machine with a range abrasive belts also supplied in the scope of delivery is included an angle and miter gauge the machine is tested when a connection to a central extraction system with an air speed of 20 m/s vacuum (gs). wood bg stuttgart space 1000 x 800 mm weight: 180 kg 
 EDGE GRINDER REHNEN-NEW- TYPE: JUNIOR R 1 ENGINE POWER 2,2 KW SPEED 22 M / S BELT SIZE 2280 X 150 MM WITH BAND OSCILLATING ABRASIVE BELT REAR 850 X 150 MM SWIVELLED 90 - 180 &ACIRC;&DEG;-TABLE SIZE 750 X 350 MM WITH PLATE ON THE DEFLECTION ROLLER TOP WITH HEAVY CAST IRON WITH BUILT-IN THREE-PHASE MOTOR 380 V, 2.2 KW 2850 RPM THE ENGINE IS EQUIPPED WITH BUILT-IN SWITCH / PLUG COMBINATION; MOTOR PROTECTION SWITCH AND MAIN SWITCH ACCORDING TO VDE DECALED DIMENSIONS OF THE REAR WALL OF THE SANDING BELT 850 X 150 MM WHICH IS BELT REAR WALL WITH A GRAPHITE SPECIAL COATING STEEL TABLE IN THE HEIGHT BY SPRING PRESSURE ADJUSTABLE TAPE MEASURE 150 X 2280 MM IS THE MACHINE WITH A RANGE ABRASIVE BELTS ALSO SUPPLIED IN THE SCOPE OF DELIVERY IS INCLUDED AN ANGLE AND MITER GAUGE THE MACHINE IS TESTED WHEN A CONNECTION TO A CENTRAL EXTRACTION SYSTEM WITH AN AIR SPEED OF 20 M/S VACUUM (GS). WOOD BG STUTTGART SPACE 1000 X 800 MM WEIGHT: 180 KG
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-4 rows, cap. 6700 pcs./h/ 5 rows,cap. 8400 pcs./h,\r\ninclude\r\nintermediate proofer i + ii, moulder, roll cutting device,\r\nheating + sterilization, setting machine, magazine for proofing frames\r\n 4 ROWS, CAP. 6700 PCS./H/ 5 ROWS,CAP. 8400 PCS./H,\R\NINCLUDE\R\NINTERMEDIATE PROOFER I + II, MOULDER, ROLL CUTTING DEVICE,\R\NHEATING + STERILIZATION, SETTING MACHINE, MAGAZINE FOR PROOFING FRAMES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 127.305 €
Ubicación: Land-hammer mill wynveen hammer mill hm, s/n 670-1150 and sullage nederman hammer mills, transport fans, storage bunkers, anschlussluftkanã¤le, automatic, fadenfã¶rderer, cyclone with rotary valve, flap with flange motor, dust filter HAMMER MILL WYNVEEN HAMMER MILL HM, S/N 670-1150 AND SULLAGE NEDERMAN HAMMER MILLS, TRANSPORT FANS, STORAGE BUNKERS, ANSCHLUSSLUFTKAN&ATILDE;&CURREN;LE, AUTOMATIC, FADENF&ATILDE;&PARA;RDERER, CYCLONE WITH ROTARY VALVE, FLAP WITH FLANGE MOTOR, DUST FILTER
Vendedor: SIA "Alfa Agro",
Año de construcción: usado
Ubicación: Land-four way forklift combi-lift 4500 wfc
year of manufacture 2004 ce

height of lift 7000 mm, capacity: 4500 kg drive with diesel with cab
closed mast height of 3.75 m 3 wheel drive 4-way positioning with combilift wfc fork medium weight 6700 kg

FOUR WAY FORKLIFT COMBI-LIFT 4500 WFC YEAR OF MANUFACTURE 2004 CE HEIGHT OF LIFT 7000 MM, CAPACITY: 4500 KG DRIVE WITH DIESEL WITH CAB CLOSED MAST HEIGHT OF 3.75 M 3 WHEEL DRIVE 4-WAY POSITIONING WITH COMBILIFT WFC FORK MEDIUM WEIGHT 6700 KG
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-frame + working plate stainless steel\r\ndimension: l 232, w 71,5, h 89 cm FRAME + WORKING PLATE STAINLESS STEEL\R\NDIMENSION: L 232, W 71,5, H 89 CM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-spindle moulder cutter feed wood produced type sk 4 / 1 year 1979

including 3 roll feed wood manufactured
fence panels made of wood
spindle height adjustment manual
ã? tools of max 200 mm
speeds: 3,000 / 4,500 / 5,000 / 6,000 / 8,000 / 10,000 rpm
spindle diameter 30 mm
spindle lock
foot brake

weight approx. 550 kg
dimensions: 1,120 x 1,000 x 1.570 mm (w x d x h)
 SPINDLE MOULDER CUTTER FEED WOOD PRODUCED TYPE SK 4 / 1 YEAR 1979 INCLUDING 3 ROLL FEED WOOD MANUFACTURED FENCE PANELS MADE OF WOOD SPINDLE HEIGHT ADJUSTMENT MANUAL &ATILDE;? TOOLS OF MAX 200 MM SPEEDS: 3,000 / 4,500 / 5,000 / 6,000 / 8,000 / 10,000 RPM SPINDLE DIAMETER 30 MM SPINDLE LOCK FOOT BRAKE WEIGHT APPROX. 550 KG DIMENSIONS: 1,120 X 1,000 X 1.570 MM (W X D X H)
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-noll can line 4 - 1981 - 36,000 cph - 150 & 250 ml slim cans				
#	make	description	oem serial no.	model no.
1	noll	noll 2 depalletizer	812500	
2	noll	empty can conveyor	sen	-
3	noll	can rinser	-	-
4	noll	noll 2 filling machine	3360031	ah-48
5	angelus	noll 2 seamer	10378481	61h
6	noll	noll 2 mixomat	3960229	s - gr - 12  a
7	anton paar	anton paar analyzer	s/n-mpds2000v3 80670100	cobrix 2
8	filtec	filled can rejector	113862, a - 10 - 2.5m-ss	ft-50
9	noll	full can conveyor	sen	-
10	noll	can warmer	781-2431	ds 6000
11	videojet	date coder 10	051081063 wd	videojet 170i
12	khs kister	noll 2 kister packer	80.689	97/40
13	khs kister	shrink tunnel	-	97/40
14	marsh unicorn	tray coder	up0591004	marsh unicorn
15	noll	case conveyor	sen	-
16	noll	noll 2 palletizer	7812500	lord vb 500k
17	cimpack	pallet tag applicator	s/n: gd12 21 8 174	cimpack 300


for full information visit abc.beveragexchange.co.uk
   NOLL CAN LINE 4 - 1981 - 36,000 CPH - 150 & 250 ML SLIM CANS # MAKE DESCRIPTION OEM SERIAL NO. MODEL NO. 1 NOLL NOLL 2 DEPALLETIZER 812500 2 NOLL EMPTY CAN CONVEYOR SEN - 3 NOLL CAN RINSER - - 4 NOLL NOLL 2 FILLING MACHINE 3360031 AH-48 5 ANGELUS NOLL 2 SEAMER 10378481 61H 6 NOLL NOLL 2 MIXOMAT 3960229 S - GR - 12 A 7 ANTON PAAR ANTON PAAR ANALYZER S/N-MPDS2000V3 80670100 COBRIX 2 8 FILTEC FILLED CAN REJECTOR 113862, A - 10 - 2.5M-SS FT-50 9 NOLL FULL CAN CONVEYOR SEN - 10 NOLL CAN WARMER 781-2431 DS 6000 11 VIDEOJET DATE CODER 10 051081063 WD VIDEOJET 170I 12 KHS KISTER NOLL 2 KISTER PACKER 80.689 97/40 13 KHS KISTER SHRINK TUNNEL - 97/40 14 MARSH UNICORN TRAY CODER UP0591004 MARSH UNICORN 15 NOLL CASE CONVEYOR SEN - 16 NOLL NOLL 2 PALLETIZER 7812500 LORD VB 500K 17 CIMPACK PALLET TAG APPLICATOR S/N: GD12 21 8 174 CIMPACK 300 FOR FULL INFORMATION VISIT ABC.BEVERAGEXCHANGE.CO.UK
Vendedor: Pennington (UK) Ltd
Año de construcción: usado
Ubicación: Land-automatic input belt -width 500 mm - speeds variabel\r\nlongitudinal + diagonal cutting\r\nmax. cutting height 75 mm, cap. ca. 150 cakes/h\r\n AUTOMATIC INPUT BELT -WIDTH 500 MM - SPEEDS VARIABEL\R\NLONGITUDINAL + DIAGONAL CUTTING\R\NMAX. CUTTING HEIGHT 75 MM, CAP. CA. 150 CAKES/H\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-4 ccts, 717 hl gross / 560 hl net content, maximum 0.9 bar, unused, coolable with 3 glycol cooling zones in the wall and 1 in the cone, isolated 150 mm trapezoidal sheet metal clad, domed lid with armatures, spray head, pt-100, sampler, installation to stand frame, h: 11,730 mm, outer diameter: 3,850 mm, inner diameter: 3,500 mm. 

4 ccts, 348 hl gross content, maximum 0.9 bar, unused, coolable over 3 glycol cooling zones in the wall and 1 in the cone, isolated 150 mm trapezoidal sheet metal clad, standing at 4 feet, with armatures, spray head, sampler, h: 7,350 mm, inner diameter: 3,200 mm, outer diameter: 3,560 mm 4 CCTS, 717 HL GROSS / 560 HL NET CONTENT, MAXIMUM 0.9 BAR, UNUSED, COOLABLE WITH 3 GLYCOL COOLING ZONES IN THE WALL AND 1 IN THE CONE, ISOLATED 150 MM TRAPEZOIDAL SHEET METAL CLAD, DOMED LID WITH ARMATURES, SPRAY HEAD, PT-100, SAMPLER, INSTALLATION TO STAND FRAME, H: 11,730 MM, OUTER DIAMETER: 3,850 MM, INNER DIAMETER: 3,500 MM. 4 CCTS, 348 HL GROSS CONTENT, MAXIMUM 0.9 BAR, UNUSED, COOLABLE OVER 3 GLYCOL COOLING ZONES IN THE WALL AND 1 IN THE CONE, ISOLATED 150 MM TRAPEZOIDAL SHEET METAL CLAD, STANDING AT 4 FEET, WITH ARMATURES, SPRAY HEAD, SAMPLER, H: 7,350 MM, INNER DIAMETER: 3,200 MM, OUTER DIAMETER: 3,560 MM
Vendedor: Hümmer GmbH
Año de construcción: usado
Precio: 7.438 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-price on request. 
fca free loaded in our warehouse germany.

one second hand kkk siemens twin 46
condensing steam turbine manufactured in 1999
with only 35.000 working hours in canopy for sale.
include is generator switchgear 10 kv with the control panel
and a serck-como vacuum- condenser from 2006 (20 to/h).
additional we can offer many many spare parts like
spare rotors and controllers.

scope of supply:
control panel / generator switchgear 10 kv
vacuum condenser / condenser pumps / canopy

turbine:	        kkk siemens
type:	                twin 46
el. power: 	        3.600 kw
running hours: 	        35.000
steam inlet pressure:	35 bar / 2,5 bar out 
inlet steam temperature:410°c
manufactured:	        1999
generator:	        vem
powerrating: 	        4.200 kva
volts:*	                10.000 volts*
hz:	                50 hz
price on request:	

 stromerzeuger-discount.com
 kürtener straße 13
 d-51465 bergisch gladbach 
 mobile: 00491635263546
 telefon: 0049 2202 2492256 
 fax: 0049 2202 2492257
 email: info@stromerzeuger-discount.de

  PRICE ON REQUEST. FCA FREE LOADED IN OUR WAREHOUSE GERMANY. ONE SECOND HAND KKK SIEMENS TWIN 46 CONDENSING STEAM TURBINE MANUFACTURED IN 1999 WITH ONLY 35.000 WORKING HOURS IN CANOPY FOR SALE. INCLUDE IS GENERATOR SWITCHGEAR 10 KV WITH THE CONTROL PANEL AND A SERCK-COMO VACUUM- CONDENSER FROM 2006 (20 TO/H). ADDITIONAL WE CAN OFFER MANY MANY SPARE PARTS LIKE SPARE ROTORS AND CONTROLLERS. SCOPE OF SUPPLY: CONTROL PANEL / GENERATOR SWITCHGEAR 10 KV VACUUM CONDENSER / CONDENSER PUMPS / CANOPY TURBINE: KKK SIEMENS TYPE: TWIN 46 EL. POWER: 3.600 KW RUNNING HOURS: 35.000 STEAM INLET PRESSURE: 35 BAR / 2,5 BAR OUT INLET STEAM TEMPERATURE:410°C MANUFACTURED: 1999 GENERATOR: VEM POWERRATING: 4.200 KVA VOLTS:* 10.000 VOLTS* HZ: 50 HZ PRICE ON REQUEST: STROMERZEUGER-DISCOUNT.COM KüRTENER STRAßE 13 D-51465 BERGISCH GLADBACH MOBILE: 00491635263546 TELEFON: 0049 2202 2492256 FAX: 0049 2202 2492257 EMAIL: INFO@STROMERZEUGER-DISCOUNT.DE
Vendedor: Kandlin Stromerzeuger-Ankauf GmbH
Año de construcción: usado
Ubicación: Land-torus-disc dryer (1x), make stord bartz industries, type rotadisc tst-0,3 v, no 20767, new 1976, continuous, material stainless steel (1.4571), working pressure vacuum (5-10 torr), with jacket (stator 19,5 ltr), external heating spiral, shaft can be heated (rotor 10,5 ltr), working pressure rotor + stator 10 bar, max. temperature 185 degr. c., motor 5,5 kw,380-420/660-725 volt (brand new motor), speed mixing shaft ± 90 rpm, mounted on frame, floorspace 2,6x1,2 m, extra specifications - with comber dust filter - 25 discs dia. 300mm, rotor lenght ± 1500mm -- reconditioned -- - heating surface rotor 3,1 m2paddle dryersdryers > paddle dryers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TORUS-DISC DRYER (1X), MAKE STORD BARTZ INDUSTRIES, TYPE ROTADISC TST-0,3 V, NO 20767, NEW 1976, CONTINUOUS, MATERIAL STAINLESS STEEL (1.4571), WORKING PRESSURE VACUUM (5-10 TORR), WITH JACKET (STATOR 19,5 LTR), EXTERNAL HEATING SPIRAL, SHAFT CAN BE HEATED (ROTOR 10,5 LTR), WORKING PRESSURE ROTOR + STATOR 10 BAR, MAX. TEMPERATURE 185 DEGR. C., MOTOR 5,5 KW,380-420/660-725 VOLT (BRAND NEW MOTOR), SPEED MIXING SHAFT ± 90 RPM, MOUNTED ON FRAME, FLOORSPACE 2,6X1,2 M, EXTRA SPECIFICATIONS - WITH COMBER DUST FILTER - 25 DISCS DIA. 300MM, ROTOR LENGHT ± 1500MM -- RECONDITIONED -- - HEATING SURFACE ROTOR 3,1 M2PADDLE DRYERSDRYERS > PADDLE DRYERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 930 €
Ubicación: Land-manufacturer: helmke, model: dor 132s-4a-157.
three-phase motor, delta/star connection, with paddle-wheel in stainless steel with diameter 670 mm for exhaust and fresh air can be used.
condition: mint condition and very clean.
ser. no.: 0802995014011
dimensions: 670x700mm, elek. voltage: 400/690v, speed: 1440u/min.
weight: 45kg.

more info? sign up!
greetings MANUFACTURER: HELMKE, MODEL: DOR 132S-4A-157. THREE-PHASE MOTOR, DELTA/STAR CONNECTION, WITH PADDLE-WHEEL IN STAINLESS STEEL WITH DIAMETER 670 MM FOR EXHAUST AND FRESH AIR CAN BE USED. CONDITION: MINT CONDITION AND VERY CLEAN. SER. NO.: 0802995014011 DIMENSIONS: 670X700MM, ELEK. VOLTAGE: 400/690V, SPEED: 1440U/MIN. WEIGHT: 45KG. MORE INFO? SIGN UP! GREETINGS
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 25.800 €
Ubicación: Land-; rear tyres remaining: 60; front tyres remaining: 60; accessories: leistung (brief):75, bereifung (v):405/70-24, bereifung (h):405/70-24, allrad, kabine, diesel, teleskoparm (längenverstellung) ; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; ACCESSORIES: LEISTUNG (BRIEF):75, BEREIFUNG (V):405/70-24, BEREIFUNG (H):405/70-24, ALLRAD, KABINE, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG)
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-surgical microscope zeiss.
mobile surgical microscope, electrically adjustable and can be operated by foot pedal.
elek. voltage: 220v.
condition: as new.

ps: on 2had4sale.de you find other medicine ash devices in range.
greetings SURGICAL MICROSCOPE ZEISS. MOBILE SURGICAL MICROSCOPE, ELECTRICALLY ADJUSTABLE AND CAN BE OPERATED BY FOOT PEDAL. ELEK. VOLTAGE: 220V. CONDITION: AS NEW. PS: ON 2HAD4SALE.DE YOU FIND OTHER MEDICINE ASH DEVICES IN RANGE. GREETINGS
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 18.800 €
Ubicación: Land-; power [ps]: 170; front tyre size: 540/65-30; rear tyre size: 580/70-38; front tyres remaining: 100; accessories: fronthydraulik, tachostand:3106, steuergerät - doppelt wirkend (4x), diesel, automatische anhängevorrichtung; top speed [km/h]: 40 ; POWER [PS]: 170; FRONT TYRE SIZE: 540/65-30; REAR TYRE SIZE: 580/70-38; FRONT TYRES REMAINING: 100; ACCESSORIES: FRONTHYDRAULIK, TACHOSTAND:3106, STEUERGERäT - DOPPELT WIRKEND (4X), DIESEL, AUTOMATISCHE ANHäNGEVORRICHTUNG; TOP SPEED [KM/H]: 40
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-machining center horizontal ba 600-2
manufacturer: sw machines
year: 2003

control siemens... sinumerik 840 d
clamping table surface... 675 x 1400mm
x axis... 600mm
y axis... 600mm
achsez... 500mm
spindle speed... 0-10000 rpm
controlled axes... 4
internal coolant... 70 bar
hsk 100
magazine places... 80
the weight of the machine... 20000kg
l x w x h... 8650 x 5150 x 4200mm
atc 2 x 40
chip conveyor
option of the table with the 5-axis
2 spindle

in very good condition, possible to try out under power. MACHINING CENTER HORIZONTAL BA 600-2 MANUFACTURER: SW MACHINES YEAR: 2003 CONTROL SIEMENS... SINUMERIK 840 D CLAMPING TABLE SURFACE... 675 X 1400MM X AXIS... 600MM Y AXIS... 600MM ACHSEZ... 500MM SPINDLE SPEED... 0-10000 RPM CONTROLLED AXES... 4 INTERNAL COOLANT... 70 BAR HSK 100 MAGAZINE PLACES... 80 THE WEIGHT OF THE MACHINE... 20000KG L X W X H... 8650 X 5150 X 4200MM ATC 2 X 40 CHIP CONVEYOR OPTION OF THE TABLE WITH THE 5-AXIS 2 SPINDLE IN VERY GOOD CONDITION, POSSIBLE TO TRY OUT UNDER POWER.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Precio: 38.500 €
Ubicación: Land-; power [ps]: 275; front tyre size: 650/75-32; rear tyre size: 16.0-20; accessories: kornkopf, betriebsstunden:2592, häcksler, kabine, pendelausgleich, siebkastenhangausgleich; working width [cm]: 600 ; POWER [PS]: 275; FRONT TYRE SIZE: 650/75-32; REAR TYRE SIZE: 16.0-20; ACCESSORIES: KORNKOPF, BETRIEBSSTUNDEN:2592, HäCKSLER, KABINE, PENDELAUSGLEICH, SIEBKASTENHANGAUSGLEICH; WORKING WIDTH [CM]: 600
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 1.490 €
Ubicación: Land-teigausrollmaschien a. fritsch kg model: 3wk630 roll fix.
band width 610 mm.
ser. no.: 3wk630117717867
dimensions: 1800x1100x1150mm
elek. voltage: 380v
condition: works.

ps: on our homepage, you will find other various gastro devices in range.
greeting TEIGAUSROLLMASCHIEN A. FRITSCH KG MODEL: 3WK630 ROLL FIX. BAND WIDTH 610 MM. SER. NO.: 3WK630117717867 DIMENSIONS: 1800X1100X1150MM ELEK. VOLTAGE: 380V CONDITION: WORKS. PS: ON OUR HOMEPAGE, YOU WILL FIND OTHER VARIOUS GASTRO DEVICES IN RANGE. GREETING
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 440 mm<br/>turning diameter over slide rest: 267 mm<br/>turning length: 1500 mm<br/>spindle passage: 76 mm<br/>turning speed range: 16 x 20 - 1600 u/min<br/>centre height: 220 mm<br/>turning diameter in the gap: 710 mm<br/>threading whitworth: 38 x 2 - 72 t.p.i<br/>threading - metric: 40 x 0,4 - 14 mm<br/>threading - modul: 18 x 0,3 - 3,50 mm<br/>spindle taper: 8 d1 camlock <br/>face feeds per rotation: 0,03 - 0,5 mm<br/>longitudinal feeds per rotation: 0,06 - 1,0 mm<br/>tailstock quill taper mt: 5 <br/>tailstock quill diameter: 75 mm<br/>tailstock quill stroke: 230 mm<br/>radial face slide travel: 280 mm<br/>upper slide-adjustment: 150 mm<br/>total power requirement: 9,4 kw<br/>weight of the machine ca.: 2,3 t<br/>dimensions of the machine ca.: 3,5 x 1,7 x 2,0 m<br/>digital display<br/>3-jaw chuck Ø 315mm 4 sets of chucks,<br/>4-jaw chuck Ø 315mm 3 sets of chucks, <br/>4-fold toolholder bd 32140, coolant device,<br/>rotating centering device<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 440 MM
TURNING DIAMETER OVER SLIDE REST: 267 MM
TURNING LENGTH: 1500 MM
SPINDLE PASSAGE: 76 MM
TURNING SPEED RANGE: 16 X 20 - 1600 U/MIN
CENTRE HEIGHT: 220 MM
TURNING DIAMETER IN THE GAP: 710 MM
THREADING WHITWORTH: 38 X 2 - 72 T.P.I
THREADING - METRIC: 40 X 0,4 - 14 MM
THREADING - MODUL: 18 X 0,3 - 3,50 MM
SPINDLE TAPER: 8 D1 CAMLOCK
FACE FEEDS PER ROTATION: 0,03 - 0,5 MM
LONGITUDINAL FEEDS PER ROTATION: 0,06 - 1,0 MM
TAILSTOCK QUILL TAPER MT: 5
TAILSTOCK QUILL DIAMETER: 75 MM
TAILSTOCK QUILL STROKE: 230 MM
RADIAL FACE SLIDE TRAVEL: 280 MM
UPPER SLIDE-ADJUSTMENT: 150 MM
TOTAL POWER REQUIREMENT: 9,4 KW
WEIGHT OF THE MACHINE CA.: 2,3 T
DIMENSIONS OF THE MACHINE CA.: 3,5 X 1,7 X 2,0 M
DIGITAL DISPLAY
3-JAW CHUCK Ø 315MM 4 SETS OF CHUCKS,
4-JAW CHUCK Ø 315MM 3 SETS OF CHUCKS,
4-FOLD TOOLHOLDER BD 32140, COOLANT DEVICE,
ROTATING CENTERING DEVICE




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-press brake hfe m2 1003
manufacturer: amada
year: 2012

control amada
force of pressure... 100t
bending length... 3110mm
controlled axes... 8
hydraulic
the weight of the machine... 6750kg
l x w x h... 4385x2430x2680mm
maximum piston stroke... 200mm

in very good condition, possible to try out under power. PRESS BRAKE HFE M2 1003 MANUFACTURER: AMADA YEAR: 2012 CONTROL AMADA FORCE OF PRESSURE... 100T BENDING LENGTH... 3110MM CONTROLLED AXES... 8 HYDRAULIC THE WEIGHT OF THE MACHINE... 6750KG L X W X H... 4385X2430X2680MM MAXIMUM PISTON STROKE... 200MM IN VERY GOOD CONDITION, POSSIBLE TO TRY OUT UNDER POWER.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Ubicación: Land-x-travel: 2700 mm<br/>y-travel: 1200 mm<br/>z-travel: 1500 mm<br/>control: heidenhain tnc 415 <br/>table surface area: 3000 x 1000 mm<br/>table load: 7000 kg<br/>spindle drive: 26 kw<br/>distance spindle /table: 1472 mm<br/>spindle turning speed range: 20 - 1800 u/min<br/>transmission ratio: 2 <br/>tool taper: 50 iso<br/>feed: 6 - 5000 mm/min<br/>rapid traverse: 10 m/min<br/>total power requirement: 55 kva<br/>weight of the machine ca.: 18,0 t<br/>dimensions of the machine ca.: 7357 x 5000 x 3607 mm<br/>universal milling head: nc <br/>atc (tool changer): 60-fach (pos.) <br/>coolant equipment: ja / yes <br/>chip (swarf) conveyor: ja / yes <br/>* nc universal-milling-head, swivel range 360 deg. (indexing 5 deg.) + 180 deg.<br/>* tool changer (atc) with 60-pos.<br/>* coolant equipment, swarf conveyor<br/>      <br/>in the years 2003 till 2007 the machine was overhauled for over 67.000,- eur. <br/>in the meantime the milling head was overhauled.<br/><br/>machine is in good condition and can be inspected under power.<br/><br/><br/><br/> X-TRAVEL: 2700 MM
Y-TRAVEL: 1200 MM
Z-TRAVEL: 1500 MM
CONTROL: HEIDENHAIN TNC 415
TABLE SURFACE AREA: 3000 X 1000 MM
TABLE LOAD: 7000 KG
SPINDLE DRIVE: 26 KW
DISTANCE SPINDLE /TABLE: 1472 MM
SPINDLE TURNING SPEED RANGE: 20 - 1800 U/MIN
TRANSMISSION RATIO: 2
TOOL TAPER: 50 ISO
FEED: 6 - 5000 MM/MIN
RAPID TRAVERSE: 10 M/MIN
TOTAL POWER REQUIREMENT: 55 KVA
WEIGHT OF THE MACHINE CA.: 18,0 T
DIMENSIONS OF THE MACHINE CA.: 7357 X 5000 X 3607 MM
UNIVERSAL MILLING HEAD: NC
ATC (TOOL CHANGER): 60-FACH (POS.)
COOLANT EQUIPMENT: JA / YES
CHIP (SWARF) CONVEYOR: JA / YES
* NC UNIVERSAL-MILLING-HEAD, SWIVEL RANGE 360 DEG. (INDEXING 5 DEG.) + 180 DEG.
* TOOL CHANGER (ATC) WITH 60-POS.
* COOLANT EQUIPMENT, SWARF CONVEYOR

IN THE YEARS 2003 TILL 2007 THE MACHINE WAS OVERHAULED FOR OVER 67.000,- EUR.
IN THE MEANTIME THE MILLING HEAD WAS OVERHAULED.

MACHINE IS IN GOOD CONDITION AND CAN BE INSPECTED UNDER POWER.



Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cnc lathe multi axis 508 mt
manufacturer: willemin-macodel
year: 2014

cnc fanuc... 31i - b5
turning diameter... 42mm
turning length... 180mm
counter spindle
spindle bore... 42mm
x axis... 450mm
y axis... 200mm
z axis... 425mm
axis a... 360°
spindle speed... 50-30000 rpm
hsk - 40
magazine places... 72
axis c... 360°
l x w x h... 2050 x 2350 x 2670mm
the weight of the machine... 2500kg
controlled axes... 8
axis u... 300mm
axis b...-45°/ +115°
internal coolant... 20-90 bar

very good condition, possible test.  CNC LATHE MULTI AXIS 508 MT MANUFACTURER: WILLEMIN-MACODEL YEAR: 2014 CNC FANUC... 31I - B5 TURNING DIAMETER... 42MM TURNING LENGTH... 180MM COUNTER SPINDLE SPINDLE BORE... 42MM X AXIS... 450MM Y AXIS... 200MM Z AXIS... 425MM AXIS A... 360° SPINDLE SPEED... 50-30000 RPM HSK - 40 MAGAZINE PLACES... 72 AXIS C... 360° L X W X H... 2050 X 2350 X 2670MM THE WEIGHT OF THE MACHINE... 2500KG CONTROLLED AXES... 8 AXIS U... 300MM AXIS B...-45°/ +115° INTERNAL COOLANT... 20-90 BAR VERY GOOD CONDITION, POSSIBLE TEST.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Precio: used machinery auction RESALE 2.700 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 4900 x 2600 x 2450 mm<br/>description: serial number al1/003221, total installed power approx. 16 kw, working area 2250 x 900 mm, panel passage height 180 mm, travelling way x-axis: 2535 mm, travelling way y-axis: 1080 mm, travelling way z-axis: 200 mm, maximum travel speed in the axes direction x-y: 67-67 m/min, maximum programmable speed in axes direction x-y-z: 50-45-22.50 m/min, main spindle 4.40 kw-max. 18000 rpm, saw unit, drilling head vertical x-axis: 6, drilling head vertical y-axis: 5, drilling head horizontal x-axis: 1 + 1, drilling head horizontal y-axis: 1 + 1, control pc-office num, xilog 3 mmi software, 6 consoles with 2 vacuum suction cups each, vacuum pump, the tools that appears in the photos are included WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 4900 X 2600 X 2450 MM
DESCRIPTION: SERIAL NUMBER AL1/003221, TOTAL INSTALLED POWER APPROX. 16 KW, WORKING AREA 2250 X 900 MM, PANEL PASSAGE HEIGHT 180 MM, TRAVELLING WAY X-AXIS: 2535 MM, TRAVELLING WAY Y-AXIS: 1080 MM, TRAVELLING WAY Z-AXIS: 200 MM, MAXIMUM TRAVEL SPEED IN THE AXES DIRECTION X-Y: 67-67 M/MIN, MAXIMUM PROGRAMMABLE SPEED IN AXES DIRECTION X-Y-Z: 50-45-22.50 M/MIN, MAIN SPINDLE 4.40 KW-MAX. 18000 RPM, SAW UNIT, DRILLING HEAD VERTICAL X-AXIS: 6, DRILLING HEAD VERTICAL Y-AXIS: 5, DRILLING HEAD HORIZONTAL X-AXIS: 1 + 1, DRILLING HEAD HORIZONTAL Y-AXIS: 1 + 1, CONTROL PC-OFFICE NUM, XILOG 3 MMI SOFTWARE, 6 CONSOLES WITH 2 VACUUM SUCTION CUPS EACH, VACUUM PUMP, THE TOOLS THAT APPEARS IN THE PHOTOS ARE INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-round pile feeder (rd66.1 serial number 700581-281053), 1st unit td66 1.4 - 4 x buckle plates, noise hoods, slit and score shaft (serial number 700581-281053), 2nd unit td66 1.4 – 4 x buckle plates, noise hoods, slit and perf shaft serial number 700581-281053)vsf52 knife unit (serial number 700243-280013), vsa presser/stacker 86.d mke.d (serial number 106836-262535) ROUND PILE FEEDER (RD66.1 SERIAL NUMBER 700581-281053), 1ST UNIT TD66 1.4 - 4 X BUCKLE PLATES, NOISE HOODS, SLIT AND SCORE SHAFT (SERIAL NUMBER 700581-281053), 2ND UNIT TD66 1.4 – 4 X BUCKLE PLATES, NOISE HOODS, SLIT AND PERF SHAFT SERIAL NUMBER 700581-281053)VSF52 KNIFE UNIT (SERIAL NUMBER 700243-280013), VSA PRESSER/STACKER 86.D MKE.D (SERIAL NUMBER 106836-262535)
Vendedor: I.E.S. (Scotland) Limited
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 2860 x 1670 x 2000 mm<br/>description: ? trailer<br> ? useful dimensions 1530 x 1390 x 1210 mm<br> ? for more details see the photos WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 2860 X 1670 X 2000 MM
DESCRIPTION: ? TRAILER
? USEFUL DIMENSIONS 1530 X 1390 X 1210 MM
? FOR MORE DETAILS SEE THE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-no. 03814

mobile clean air dust extractors with briquetting press al-ko power unit 200 p - bp neumaschine with manufacturer's warranty technical specifications: intake manifold 200 mm motor nominal power 3 kw / 3 ph voltage 400 v / 50 hz maximum flow 3010 m â³/h nominal volume flow 2262 m â³/h vacuum at v nenn2174 pa filter area 13.8 mâ² filter cleaning pneumatic chip collecting volume briquetting press noise level 72 db (a) dimensions lwh in mm 2268 x 1314 x 2467 brikett wheel power 30-40 kg / h briquette diameter 40 mm, weight: 950 kg  NO. 03814 MOBILE CLEAN AIR DUST EXTRACTORS WITH BRIQUETTING PRESS AL-KO POWER UNIT 200 P - BP NEUMASCHINE WITH MANUFACTURER'S WARRANTY TECHNICAL SPECIFICATIONS: INTAKE MANIFOLD 200 MM MOTOR NOMINAL POWER 3 KW / 3 PH VOLTAGE 400 V / 50 HZ MAXIMUM FLOW 3010 M &ACIRC;&SUP3;/H NOMINAL VOLUME FLOW 2262 M &ACIRC;&SUP3;/H VACUUM AT V NENN2174 PA FILTER AREA 13.8 M&ACIRC;&SUP2; FILTER CLEANING PNEUMATIC CHIP COLLECTING VOLUME BRIQUETTING PRESS NOISE LEVEL 72 DB (A) DIMENSIONS LWH IN MM 2268 X 1314 X 2467 BRIKETT WHEEL POWER 30-40 KG / H BRIQUETTE DIAMETER 40 MM, WEIGHT: 950 KG
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 180 kg<br/>dimensions (l x w x h) approx.: 700 x 650 x 2050 mm<br/>description: internal reference m34, serial number 70634, capacity 500 liters, operating pressure 10 bar WEIGHT APPROX.: 180 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 650 X 2050 MM
DESCRIPTION: INTERNAL REFERENCE M34, SERIAL NUMBER 70634, CAPACITY 500 LITERS, OPERATING PRESSURE 10 BAR
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-sitma c-905 line-film wrapping system
year 1998
machines:
sitma and 525
sitma c 905
sitma and 711
feeders:
sitma 572 bt
sitma and 675 x 2
sitma and 978-b
promak gamma label machine
the counter about 11.000 pcs
cycles about-39.000.000
length about 6.250 mm
 SITMA C-905 LINE-FILM WRAPPING SYSTEM YEAR 1998 MACHINES: SITMA AND 525 SITMA C 905 SITMA AND 711 FEEDERS: SITMA 572 BT SITMA AND 675 X 2 SITMA AND 978-B PROMAK GAMMA LABEL MACHINE THE COUNTER ABOUT 11.000 PCS CYCLES ABOUT-39.000.000 LENGTH ABOUT 6.250 MM
Vendedor: M-Vision
Año de construcción: usado
Precio: used machinery auction RESALE 3.800 €
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 6700 x 2400 x 2100 mm<br/>description: ? double end tenoner<br> ? serial number 83724.00<br> ? total installed power approx. 40 kw<br> ? max. working width approx. 3500 mm<br> ? max. workpiece thickness approx. 160 mm<br> ? chain length approx. 2400 mm<br> ? machine equipped identically on both sides with 3 aggregates on each side:<br> ? 1 - scoring unit: depth, height and angle adjustable, motor 1.10 kw-3000/6000 rpm<br> ? 2 - hogging unit: depth, height and angle adjustable, motor 5.50 kw-3000/6000 rpm rpm<br> ? 3 - milling aggregate: depth, height, and angle adjustable<br> ? feed speed adjustable from 6 m/min up to 30 m/min<br> ? feed motor 2.20 kw<br> ? machine opening motor power 0.74 kw<br> ? separated electrical control cabinet WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 6700 X 2400 X 2100 MM
DESCRIPTION: ? DOUBLE END TENONER
? SERIAL NUMBER 83724.00
? TOTAL INSTALLED POWER APPROX. 40 KW
? MAX. WORKING WIDTH APPROX. 3500 MM
? MAX. WORKPIECE THICKNESS APPROX. 160 MM
? CHAIN LENGTH APPROX. 2400 MM
? MACHINE EQUIPPED IDENTICALLY ON BOTH SIDES WITH 3 AGGREGATES ON EACH SIDE:
? 1 - SCORING UNIT: DEPTH, HEIGHT AND ANGLE ADJUSTABLE, MOTOR 1.10 KW-3000/6000 RPM
? 2 - HOGGING UNIT: DEPTH, HEIGHT AND ANGLE ADJUSTABLE, MOTOR 5.50 KW-3000/6000 RPM RPM
? 3 - MILLING AGGREGATE: DEPTH, HEIGHT, AND ANGLE ADJUSTABLE
? FEED SPEED ADJUSTABLE FROM 6 M/MIN UP TO 30 M/MIN
? FEED MOTOR 2.20 KW
? MACHINE OPENING MOTOR POWER 0.74 KW
? SEPARATED ELECTRICAL CONTROL CABINET
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-arsoma em 410 - preview
year 1990
printing station: 6 uv
e + l web width of 410 mm
teknek-web cleaning
gew uv system
matrix rewinder
corona treatment
k & b gap master
bst power scope 3000
base printing cylinder set base anilox set of rollers
altough the machine is one of the manufactures of older generations, the flexo
units belong to the newer arsoma generation with quick change system.
 ARSOMA EM 410 - PREVIEW YEAR 1990 PRINTING STATION: 6 UV E + L WEB WIDTH OF 410 MM TEKNEK-WEB CLEANING GEW UV SYSTEM MATRIX REWINDER CORONA TREATMENT K & B GAP MASTER BST POWER SCOPE 3000 BASE PRINTING CYLINDER SET BASE ANILOX SET OF ROLLERS ALTOUGH THE MACHINE IS ONE OF THE MANUFACTURES OF OLDER GENERATIONS, THE FLEXO UNITS BELONG TO THE NEWER ARSOMA GENERATION WITH QUICK CHANGE SYSTEM.
Vendedor: GRAPHIC- Systems
Año de construcción: usado
Precio: used machinery auction RESALE 9.500 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 11200 x 2525 x 3500 mm<br/>description: ? automatic packaging machine, wrapping machine for stretchable film<br> ? serial number 2274-2275<br> ? minimum workpiece length 300 mm<br> ? maximum workpiece dimensions 1400 x 600 mm (width x height)<br> ? adjustable feed speed from 0 up to 14 m/min<br> ? parts of the machine: <, br>, ? 1 - cmb tcec-15/30 motorized belt conveyor, length 3000 mm, useful width 2 x 675 mm, motor power 0.37 kw<br> ? 2 - cold cutting ang jointing station with magazine for packaging material coils (air bubble plastic coils, paperboard, etc), maximum passage width 1400 mm, maximum passage height 600 mm, maximum coil length 1600 mm, maximum coil diameter 1200 mm<br> ? 3 - cmb tc-15/35 motorized belt conveyor, length 3500 mm, useful width 1500 mm, motor power 0.37 kw<br> ? 4 - integral transport unit cmb ti-12/250, length 983 mm, useful width 1225 mm, central belt width 180 mm<br> ? 5 - automatic wrapping station with rotating wheel for stretchable film cmb erl-150, inner diameter of the wheel 1480 mm, adjustable wheel rotation speed, adjustable start and end of the rotation with respect to the workpiece, motor power 3 kw, maximum passage height 600 mm, maximum coil length 250 mm, maximum coil diameter 250 mm<br> ? 6 - cmb tc-13/30 motorized belt conveyor, length 3000 mm, useful width 1500 mm, motor power 0.37 kw WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 11200 X 2525 X 3500 MM
DESCRIPTION: ? AUTOMATIC PACKAGING MACHINE, WRAPPING MACHINE FOR STRETCHABLE FILM
? SERIAL NUMBER 2274-2275
? MINIMUM WORKPIECE LENGTH 300 MM
? MAXIMUM WORKPIECE DIMENSIONS 1400 X 600 MM (WIDTH X HEIGHT)
? ADJUSTABLE FEED SPEED FROM 0 UP TO 14 M/MIN
? PARTS OF THE MACHINE: <, BR>, ? 1 - CMB TCEC-15/30 MOTORIZED BELT CONVEYOR, LENGTH 3000 MM, USEFUL WIDTH 2 X 675 MM, MOTOR POWER 0.37 KW
? 2 - COLD CUTTING ANG JOINTING STATION WITH MAGAZINE FOR PACKAGING MATERIAL COILS (AIR BUBBLE PLASTIC COILS, PAPERBOARD, ETC), MAXIMUM PASSAGE WIDTH 1400 MM, MAXIMUM PASSAGE HEIGHT 600 MM, MAXIMUM COIL LENGTH 1600 MM, MAXIMUM COIL DIAMETER 1200 MM
? 3 - CMB TC-15/35 MOTORIZED BELT CONVEYOR, LENGTH 3500 MM, USEFUL WIDTH 1500 MM, MOTOR POWER 0.37 KW
? 4 - INTEGRAL TRANSPORT UNIT CMB TI-12/250, LENGTH 983 MM, USEFUL WIDTH 1225 MM, CENTRAL BELT WIDTH 180 MM
? 5 - AUTOMATIC WRAPPING STATION WITH ROTATING WHEEL FOR STRETCHABLE FILM CMB ERL-150, INNER DIAMETER OF THE WHEEL 1480 MM, ADJUSTABLE WHEEL ROTATION SPEED, ADJUSTABLE START AND END OF THE ROTATION WITH RESPECT TO THE WORKPIECE, MOTOR POWER 3 KW, MAXIMUM PASSAGE HEIGHT 600 MM, MAXIMUM COIL LENGTH 250 MM, MAXIMUM COIL DIAMETER 250 MM
? 6 - CMB TC-13/30 MOTORIZED BELT CONVEYOR, LENGTH 3000 MM, USEFUL WIDTH 1500 MM, MOTOR POWER 0.37 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-capacity: 67.88l, temperature: 0-110°c, max. overpressure: 10bar.  CAPACITY: 67.88L, TEMPERATURE: 0-110°C, MAX. OVERPRESSURE: 10BAR.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 5.700 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 6010 x 2070 x 1670 mm<br/>description: ? moulder<br> ? serial number 031020051<br> ? total installed power 48 kw<br> ? working width from 25 mm up to 230 mm<br> ? working height from 6 mm up to 120 mm<br> ? total table length 6000 mm<br> ? entrance table length 2500 mm<br> ? 7 heads: below 5.50 kw - right 5.50 kw - left 7.50 kw - above 7.50 kw - right 5.50 kw - below 5.50 kw - universal 7.50 kw<br> ? spindles diameter 40 mm<br> ? spindles rotation speed 6000 rpm<br> ? variable feed speed from 3 m/min up to 24 m/min<br> ? some accessories are included, see the photos WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 6010 X 2070 X 1670 MM
DESCRIPTION: ? MOULDER
? SERIAL NUMBER 031020051
? TOTAL INSTALLED POWER 48 KW
? WORKING WIDTH FROM 25 MM UP TO 230 MM
? WORKING HEIGHT FROM 6 MM UP TO 120 MM
? TOTAL TABLE LENGTH 6000 MM
? ENTRANCE TABLE LENGTH 2500 MM
? 7 HEADS: BELOW 5.50 KW - RIGHT 5.50 KW - LEFT 7.50 KW - ABOVE 7.50 KW - RIGHT 5.50 KW - BELOW 5.50 KW - UNIVERSAL 7.50 KW
? SPINDLES DIAMETER 40 MM
? SPINDLES ROTATION SPEED 6000 RPM
? VARIABLE FEED SPEED FROM 3 M/MIN UP TO 24 M/MIN
? SOME ACCESSORIES ARE INCLUDED, SEE THE PHOTOS
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)