599 ofertas

Año de construcción: usado
Ubicación: Land-diesel generator power plant 106 mw with wartsila 7x18v46 hfo
 
this 106 mw power plant was delivered by wartsila in year 2000, operation started in 2001 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated from 50700 to 69000 hours in base load power production this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works are carried out strictly in accordance with wartsila manuals, 60 000 hour maintenance is carried out to 3 units. no any unexpected breakdowns has happened. delivery contains complete functioning power plant with 110 kv switchyard, buildings and day tank yard. power plant is currently in standby mode, in excellent condition it has all service records and complete original documentation available at site.
 
main plant characteristics at current site conditions:
 
net power output at site: 106 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
shaft output: iso 16 290 kwm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
 
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c
internal electric consump: 2.5 % at full load, up to 4% at low load   DIESEL GENERATOR POWER PLANT 106 MW WITH WARTSILA 7X18V46 HFO THIS 106 MW POWER PLANT WAS DELIVERED BY WARTSILA IN YEAR 2000, OPERATION STARTED IN 2001 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED FROM 50700 TO 69000 HOURS IN BASE LOAD POWER PRODUCTION THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS ARE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS, 60 000 HOUR MAINTENANCE IS CARRIED OUT TO 3 UNITS. NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT WITH 110 KV SWITCHYARD, BUILDINGS AND DAY TANK YARD. POWER PLANT IS CURRENTLY IN STANDBY MODE, IN EXCELLENT CONDITION IT HAS ALL SERVICE RECORDS AND COMPLETE ORIGINAL DOCUMENTATION AVAILABLE AT SITE. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: NET POWER OUTPUT AT SITE: 106 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM SHAFT OUTPUT: ISO 16 290 KWM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C INTERNAL ELECTRIC CONSUMP: 2.5 % AT FULL LOAD, UP TO 4% AT LOW LOAD
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 300 €
Ubicación: Land-NL Netherlands, 4731T Oudenbosch
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-alternator abb amg 0900 - 4541 kva / 720 rpm / 60 hz - 8 new units

this alternator was designed to operate with diesel or gas engine generator at rotation speed of 720 rpm and electrical output max 4541 kva / 6.6 kv / 60 hz. there are 8 identical alternators available al brand new and identical. the alternator frame is a rigid welded structure and the sator is built of thin electric sheet laminations which are insulated on both sides with heat resistant inorganic resin. alternators have two bearings and they have brushless agitation and with special unitrol avr 1000 control system. the alternator is air cooled. all alternators are in warm store house, packed for sea transportation and in new like condition.

technical data
manufacturer: abb finland
year of manufacturing: 2010
alternator type amg 0900sk10 lse
cooling method air cooled
number of alternators 8 identical units
rated output 4541 kva / 6600 v / 60 hz
design rotation speed 720 rpm
power factor 0.85
efficiency at 100% load 96.50 %
weight of one alternator net 17750 kg   ALTERNATOR ABB AMG 0900 - 4541 KVA / 720 RPM / 60 HZ - 8 NEW UNITS THIS ALTERNATOR WAS DESIGNED TO OPERATE WITH DIESEL OR GAS ENGINE GENERATOR AT ROTATION SPEED OF 720 RPM AND ELECTRICAL OUTPUT MAX 4541 KVA / 6.6 KV / 60 HZ. THERE ARE 8 IDENTICAL ALTERNATORS AVAILABLE AL BRAND NEW AND IDENTICAL. THE ALTERNATOR FRAME IS A RIGID WELDED STRUCTURE AND THE SATOR IS BUILT OF THIN ELECTRIC SHEET LAMINATIONS WHICH ARE INSULATED ON BOTH SIDES WITH HEAT RESISTANT INORGANIC RESIN. ALTERNATORS HAVE TWO BEARINGS AND THEY HAVE BRUSHLESS AGITATION AND WITH SPECIAL UNITROL AVR 1000 CONTROL SYSTEM. THE ALTERNATOR IS AIR COOLED. ALL ALTERNATORS ARE IN WARM STORE HOUSE, PACKED FOR SEA TRANSPORTATION AND IN NEW LIKE CONDITION. TECHNICAL DATA MANUFACTURER: ABB FINLAND YEAR OF MANUFACTURING: 2010 ALTERNATOR TYPE AMG 0900SK10 LSE COOLING METHOD AIR COOLED NUMBER OF ALTERNATORS 8 IDENTICAL UNITS RATED OUTPUT 4541 KVA / 6600 V / 60 HZ DESIGN ROTATION SPEED 720 RPM POWER FACTOR 0.85 EFFICIENCY AT 100% LOAD 96.50 % WEIGHT OF ONE ALTERNATOR NET 17750 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-dpx offers a variety of synchronization panels able to share the load of multiple generating sets., all options are possible., for example these pictures are for synchronizing 1x 450 kva and 1x 700 kva., but it is also possible to connect 3, 4, 5 ,6 or even more gensets of all power outputs. DPX OFFERS A VARIETY OF SYNCHRONIZATION PANELS ABLE TO SHARE THE LOAD OF MULTIPLE GENERATING SETS., ALL OPTIONS ARE POSSIBLE., FOR EXAMPLE THESE PICTURES ARE FOR SYNCHRONIZING 1X 450 KVA AND 1X 700 KVA., BUT IT IS ALSO POSSIBLE TO CONNECT 3, 4, 5 ,6 OR EVEN MORE GENSETS OF ALL POWER OUTPUTS.
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-wartsila 52 mw chp power plant with 6 x 20v34sg gas generators - 2005

complete running power plant with 6 units of wartsila 20v34sg spark ignited natural gas engine driven generators. plant has the heat recovery boilers which can produce 6 x 4.5 t/h low pressure steam. the main equipment was delivered and commissioned by wartsila in year 2006 and 2008 and today the units have approx 40 000 - 50 000 operating hours depending on unit. the equipment is in good operational condition but the engines need a 46 000 hour overhaul.

generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipment.

the engines are of the four stroke, lean burn, pre chamber, spark ignited, port injected, trunk piston, turbocharged and intercooled design. the engine automation is a complete embedded management system, integrated with an engine control system for electricity controlled fuel injection. the control system is distributed bus based system where monitoring and control function is placed close to measuring and control point. this leads to less wiring and improved performance. the engines are designed for continuous operation in gas mode in island mode at any load between 40 -100% of nominal power

main technical data at full load and current site conditions:
installed power 52 300 kw at 31.5 kv, 50 hz
plant steam output 6 x 5 tons/h at 14 bar
fuel: natural gas
engines: 6 x w20v34sg, running at 750 rpm
alternators: 6 x abb 12 162 kva, 11 kv, 50 hz, p.f. 0.8
year of manufacturing: 2005
operating hours: approx 50000 /unit
original heat rate (at alt.) 8188 kj/kwhe (44.0 %)
plant own consumption: 1200 kw
cooling system: closed loop radiators
status: in peak loading operation
condition: in good operational   WARTSILA 52 MW CHP POWER PLANT WITH 6 X 20V34SG GAS GENERATORS - 2005 COMPLETE RUNNING POWER PLANT WITH 6 UNITS OF WARTSILA 20V34SG SPARK IGNITED NATURAL GAS ENGINE DRIVEN GENERATORS. PLANT HAS THE HEAT RECOVERY BOILERS WHICH CAN PRODUCE 6 X 4.5 T/H LOW PRESSURE STEAM. THE MAIN EQUIPMENT WAS DELIVERED AND COMMISSIONED BY WARTSILA IN YEAR 2006 AND 2008 AND TODAY THE UNITS HAVE APPROX 40 000 - 50 000 OPERATING HOURS DEPENDING ON UNIT. THE EQUIPMENT IS IN GOOD OPERATIONAL CONDITION BUT THE ENGINES NEED A 46 000 HOUR OVERHAUL. GENERATORS ARE INSTALLED ON COMMON BASE FRAME WITH THE ENGINES AND COMMON BASE FRAME IS ISOLATED FROM THE FOUNDATION BY FLEXIBLE MOUNTING WITH STEEL SPRINGS. MOST OF THE AUXILIARIES ARE IN THE FACTORY BUILT IN LARGE NEW TYPE MODULES WHICH ENABLE EASY RELOCATION OF THE EQUIPMENT. THE ENGINES ARE OF THE FOUR STROKE, LEAN BURN, PRE CHAMBER, SPARK IGNITED, PORT INJECTED, TRUNK PISTON, TURBOCHARGED AND INTERCOOLED DESIGN. THE ENGINE AUTOMATION IS A COMPLETE EMBEDDED MANAGEMENT SYSTEM, INTEGRATED WITH AN ENGINE CONTROL SYSTEM FOR ELECTRICITY CONTROLLED FUEL INJECTION. THE CONTROL SYSTEM IS DISTRIBUTED BUS BASED SYSTEM WHERE MONITORING AND CONTROL FUNCTION IS PLACED CLOSE TO MEASURING AND CONTROL POINT. THIS LEADS TO LESS WIRING AND IMPROVED PERFORMANCE. THE ENGINES ARE DESIGNED FOR CONTINUOUS OPERATION IN GAS MODE IN ISLAND MODE AT ANY LOAD BETWEEN 40 -100% OF NOMINAL POWER MAIN TECHNICAL DATA AT FULL LOAD AND CURRENT SITE CONDITIONS: INSTALLED POWER 52 300 KW AT 31.5 KV, 50 HZ PLANT STEAM OUTPUT 6 X 5 TONS/H AT 14 BAR FUEL: NATURAL GAS ENGINES: 6 X W20V34SG, RUNNING AT 750 RPM ALTERNATORS: 6 X ABB 12 162 KVA, 11 KV, 50 HZ, P.F. 0.8 YEAR OF MANUFACTURING: 2005 OPERATING HOURS: APPROX 50000 /UNIT ORIGINAL HEAT RATE (AT ALT.) 8188 KJ/KWHE (44.0 %) PLANT OWN CONSUMPTION: 1200 KW COOLING SYSTEM: CLOSED LOOP RADIATORS STATUS: IN PEAK LOADING OPERATION CONDITION: IN GOOD OPERATIONAL
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 850 €
Ubicación: Land-2.000a abb sace e2 breaker 2.000A ABB SACE E2 BREAKER
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-rubber band machine drum diameter: 520 mm drum width: 650 mm maximum load weight: 130 kg maximum volume: 52 dm â³ electric motor: 4 kw electric total power: 8 kw filter unit of ragi  RUBBER BAND MACHINE DRUM DIAMETER: 520 MM DRUM WIDTH: 650 MM MAXIMUM LOAD WEIGHT: 130 KG MAXIMUM VOLUME: 52 DM ³ ELECTRIC MOTOR: 4 KW ELECTRIC TOTAL POWER: 8 KW FILTER UNIT OF RAGI
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-Ø fan 700 mm, 1340 rpm\r\nsuction.- or pressure side with protection grid\r\nwidth 900 x deepnes 610/870 x height 940 mm\r\n Ø FAN 700 MM, 1340 RPM\R\NSUCTION.- OR PRESSURE SIDE WITH PROTECTION GRID\R\NWIDTH 900 X DEEPNES 610/870 X HEIGHT 940 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-workshop hall up for immediate dismantling (approx. 48.7 mtr long * 21.7 mtr wide * 7 mtr to the eaves / 7.7 mtr to the top) equipped with a 8 ton overhead crane. the clear span workshop has a WORKSHOP HALL UP FOR IMMEDIATE DISMANTLING (APPROX. 48.7 MTR LONG * 21.7 MTR WIDE * 7 MTR TO THE EAVES / 7.7 MTR TO THE TOP) EQUIPPED WITH A 8 TON OVERHEAD CRANE. THE CLEAR SPAN WORKSHOP HAS A "LEAN-TO" ANNEX, APPROX. 19M LONG * 14M WIDE * 5 MTR TO THE EAVES. APPROXIMATE DIMENSIONS OF THE WORKSHOP: HALL LENGTH: 48.70 MTR; INDOOR WIDTH: 21.70 MTR; EAVES HEIGHT: APPROX. 7.00 M, RIDGE HEIGHT: 7.70 M. APPROXIMATE DIMENSIONS OF ANNEX: LENGTH: 18,7,00 METERS; WIDTH: 14.00 METERS; EAVE-HEIGHT: 6.00 METERS; ROOF CLADDING: THE ROOFING CONSISTS OF SANDWICH PANELS. WALL CLADDING: CONCRETE SLABS THAT SHALL BE DISPOSED OF. INCLUSIVE OF TWO 8T ABUS OVERHEAD CRANES. DOCUMENTATION: HAS BEEN REQUESTED AND WILL SOON BE AVAILABLE. AVAILABILITY: IMMEDIATELY. LOCATION: GRATER REGION OF FRANKFURT AM MAIN. VISIT BY APPOINTMENT. PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine mesh 12xxxl<br><br>mesh bag packaging machine. designed to handle pe mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc. full stainless steel version, plc controller and touch screen. print mark sensor. suitable films: pe-net, net-film combinations, etc. bag styles: pillow, gusset and gusset bag with handle holes. - specifiations: film width: max. 1.200mm | bag length: 100-800mm | bag width: 290-590mm | max. speed of the machine in neutral: 12 cycles/minute | compressed air: 0.8m³/6bar | power: 220v, 6kw.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE MESH 12XXXL

MESH BAG PACKAGING MACHINE. DESIGNED TO HANDLE PE MESH FILM TO MAKE PILLOW OR GUSSET BAGS, SUITABLE FOR PACKING FRESH VEGETABLE AND FRUITS SUCH AS POTATOES, ONIONS, APPLES, CABBAGE, PEAS, CARROTS, PEARS, LEMONS, GRAPEFRUITS, KIWI, ETC. FULL STAINLESS STEEL VERSION, PLC CONTROLLER AND TOUCH SCREEN. PRINT MARK SENSOR. SUITABLE FILMS: PE-NET, NET-FILM COMBINATIONS, ETC. BAG STYLES: PILLOW, GUSSET AND GUSSET BAG WITH HANDLE HOLES. - SPECIFIATIONS: FILM WIDTH: MAX. 1.200MM | BAG LENGTH: 100-800MM | BAG WIDTH: 290-590MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 12 CYCLES/MINUTE | COMPRESSED AIR: 0.8M³/6BAR | POWER: 220V, 6KW.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-technical data:
-working height | 950 mm
-pneumatic connection | min. 6 bar
-total length | 4.770 mm

work piece and edge parameters:
-workpiece width min:
-at work-piece thickness 12-22 mm | 70 mm *.
-for panel thickness 23-40 mm | 120 mm *.
-at work-piece thickness 60-41 mm / 150 mm *.
* depending on the length of the workpiece
-workpiece overhang | 38 mm
-workpiece thickness. 8-60 mm
-edge height max. work piece height = | + 6 mm
-edge material role. 0.4-3 mm
-edge cross section max.
-for pvc. 135 mm â²
-for veneer | 100 mmâ²
-roll diameter max.        ⦠830 mm
-edge material strip | 0.4-8 mm
-edge cross section max.
-in strips. 360 mm â²
-if no radius is specified, is r = 2 mm
produced and delivered

overview of standard equipment:
gluing unit a8
end trimming unit chamfer/straight 2 x 0.18 kw
milling unit 2 x 0,55 kw counter running
contour trimming unit 1 x 0, 35 kw wd 40
profile scraper
schwabbelaggregat

amenities:
-feed variable 8-14 m / min - motor-driven height adjustment upper pressure
program adjustment compression zone
-quickmelt order unit
-automation package - 2 x multiple roles keying flush milling motor
-2 x special keying for scraper - glue joint scraper
-pu upper pressure rollers instead of rubber rollers
-interface electr. / mechan. zhr 01 /.
zhr 15
 TECHNICAL DATA: -WORKING HEIGHT | 950 MM -PNEUMATIC CONNECTION | MIN. 6 BAR -TOTAL LENGTH | 4.770 MM WORK PIECE AND EDGE PARAMETERS: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM | 70 MM *. -FOR PANEL THICKNESS 23-40 MM | 120 MM *. -AT WORK-PIECE THICKNESS 60-41 MM / 150 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG | 38 MM -WORKPIECE THICKNESS. 8-60 MM -EDGE HEIGHT MAX. WORK PIECE HEIGHT = | + 6 MM -EDGE MATERIAL ROLE. 0.4-3 MM -EDGE CROSS SECTION MAX. -FOR PVC. 135 MM &ACIRC;&SUP2; -FOR VENEER | 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP | 0.4-8 MM -EDGE CROSS SECTION MAX. -IN STRIPS. 360 MM &ACIRC;&SUP2; -IF NO RADIUS IS SPECIFIED, IS R = 2 MM PRODUCED AND DELIVERED OVERVIEW OF STANDARD EQUIPMENT: GLUING UNIT A8 END TRIMMING UNIT CHAMFER/STRAIGHT 2 X 0.18 KW MILLING UNIT 2 X 0,55 KW COUNTER RUNNING CONTOUR TRIMMING UNIT 1 X 0, 35 KW WD 40 PROFILE SCRAPER SCHWABBELAGGREGAT AMENITIES: -FEED VARIABLE 8-14 M / MIN - MOTOR-DRIVEN HEIGHT ADJUSTMENT UPPER PRESSURE PROGRAM ADJUSTMENT COMPRESSION ZONE -QUICKMELT ORDER UNIT -AUTOMATION PACKAGE - 2 X MULTIPLE ROLES KEYING FLUSH MILLING MOTOR -2 X SPECIAL KEYING FOR SCRAPER - GLUE JOINT SCRAPER -PU UPPER PRESSURE ROLLERS INSTEAD OF RUBBER ROLLERS -INTERFACE ELECTR. / MECHAN. ZHR 01 /. ZHR 15
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine mesh 14xxl<br><br>mesh bag packaging machine. designed to handle pe mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc. full stainless steel version, plc controller and touch screen. print mark sensor. suitable films: pe-net, net-film combinations, etc. bag styles: pillow, gusset and gusset bag with handle holes. - specifiations: film width: max. 1.000mm | bag length: 100-600mm | bag width: 240-490mm | max. speed of the machine in neutral: 14 cycles/minute | compressed air: 0.6m³/6bar | power: 220v, 5kw.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE MESH 14XXL

MESH BAG PACKAGING MACHINE. DESIGNED TO HANDLE PE MESH FILM TO MAKE PILLOW OR GUSSET BAGS, SUITABLE FOR PACKING FRESH VEGETABLE AND FRUITS SUCH AS POTATOES, ONIONS, APPLES, CABBAGE, PEAS, CARROTS, PEARS, LEMONS, GRAPEFRUITS, KIWI, ETC. FULL STAINLESS STEEL VERSION, PLC CONTROLLER AND TOUCH SCREEN. PRINT MARK SENSOR. SUITABLE FILMS: PE-NET, NET-FILM COMBINATIONS, ETC. BAG STYLES: PILLOW, GUSSET AND GUSSET BAG WITH HANDLE HOLES. - SPECIFIATIONS: FILM WIDTH: MAX. 1.000MM | BAG LENGTH: 100-600MM | BAG WIDTH: 240-490MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 14 CYCLES/MINUTE | COMPRESSED AIR: 0.6M³/6BAR | POWER: 220V, 5KW.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom:

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual

i - change head kit manually adjustable
-2 exchange heads
-for manual adjustment on the different
edge thicknesses for chamfer milling or the
manual setup of chamfer milling on
radius milling
-maximum thickness of edges of chamfer radius tool:
-r 1.5 = 0.6 mm
-r 2.0 = 0.8 mm
-if r 3.0 = 1.0 mm
-chamfer angle 15 degrees

3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edge

3.8 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

other accessories

carriage
folding for the rectangular insertion of workpieces at unilateral editing.
workpiece dimension 500 x 1600 mm

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment of straigt on
straight line caps
-pneumatic adjustment of the cap motors
to flush - or ã?bestandskappen
-pneumatic adjustment before milling unit
to flush - or excess of jurisdiction milling
-automatic adjustment of straigt on
radius milling shape milling
-pneumatic adjustment pn10 and fa11
to the side driving away from the
workspace
-electronic height adjustment

workpiece management for fk device
with additional clamping workpiece length
min. 120 mm 
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK11 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 7755 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM: 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL I - CHANGE HEAD KIT MANUALLY ADJUSTABLE -2 EXCHANGE HEADS -FOR MANUAL ADJUSTMENT ON THE DIFFERENT EDGE THICKNESSES FOR CHAMFER MILLING OR THE MANUAL SETUP OF CHAMFER MILLING ON RADIUS MILLING -MAXIMUM THICKNESS OF EDGES OF CHAMFER RADIUS TOOL: -R 1.5 = 0.6 MM -R 2.0 = 0.8 MM -IF R 3.0 = 1.0 MM -CHAMFER ANGLE 15 DEGREES 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGE 3.8 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: OTHER ACCESSORIES CARRIAGE FOLDING FOR THE RECTANGULAR INSERTION OF WORKPIECES AT UNILATERAL EDITING. WORKPIECE DIMENSION 500 X 1600 MM WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE F&ATILDE;&FRAC14;GEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT OF STRAIGT ON STRAIGHT LINE CAPS -PNEUMATIC ADJUSTMENT OF THE CAP MOTORS TO FLUSH - OR &ATILDE;?BESTANDSKAPPEN -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -AUTOMATIC ADJUSTMENT OF STRAIGT ON RADIUS MILLING SHAPE MILLING -PNEUMATIC ADJUSTMENT PN10 AND FA11 TO THE SIDE DRIVING AWAY FROM THE WORKSPACE -ELECTRONIC HEIGHT ADJUSTMENT WORKPIECE MANAGEMENT FOR FK DEVICE WITH ADDITIONAL CLAMPING WORKPIECE LENGTH MIN. 120 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine mesh 15xl<br><br>mesh bag packaging machine. designed to handle pe mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc.. full stainless steel version, plc controller and touch screen. print mark sensor. suitable films: pe-net, net-film combinations, etc.. bag styles: pillow, gusset and gusset bag with handle holes. - specifiations: film width: max. 800mm | bag length: 100-480mm | bag width: 160-390mm | max. speed of the machine in neutral: 15 cycles/minute | compressed air: 0.40m³/6bar | power: 220v, 4kw.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE MESH 15XL

MESH BAG PACKAGING MACHINE. DESIGNED TO HANDLE PE MESH FILM TO MAKE PILLOW OR GUSSET BAGS, SUITABLE FOR PACKING FRESH VEGETABLE AND FRUITS SUCH AS POTATOES, ONIONS, APPLES, CABBAGE, PEAS, CARROTS, PEARS, LEMONS, GRAPEFRUITS, KIWI, ETC.. FULL STAINLESS STEEL VERSION, PLC CONTROLLER AND TOUCH SCREEN. PRINT MARK SENSOR. SUITABLE FILMS: PE-NET, NET-FILM COMBINATIONS, ETC.. BAG STYLES: PILLOW, GUSSET AND GUSSET BAG WITH HANDLE HOLES. - SPECIFIATIONS: FILM WIDTH: MAX. 800MM | BAG LENGTH: 100-480MM | BAG WIDTH: 160-390MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 15 CYCLES/MINUTE | COMPRESSED AIR: 0.40M³/6BAR | POWER: 220V, 4KW.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk 11 manual
-profile scraper pn10
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk13 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠8545 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.
-order unit with fine fluting-

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual
the following tools was included with delivery:
-i change head set, autom. adjustable - i india radius cutter set for fk r = 2 mm 3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edges, with quick change heads

3.8 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edges, with quick change heads

3.9 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

change:
-customized exhaust hoods, so that higher edge overhangs can be driven. example: 25mm 16 mm panel thickness edge height (or 23 mm / 33 mm)

other accessories

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

workpiece support in scissor design
-with roll coating, max. 1000 mm extendable

remote control for ambition

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment before milling unit to flush - or excess of jurisdiction milling
-multi scraper mn21 automatically instead of
2xpn10, to automatically convert different radius or chamfer
-electronic height adjustment

detergent spray unit top/bottom
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK 11 MANUAL -PROFILE SCRAPER PN10 -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK13 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 8545 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. -ORDER UNIT WITH FINE FLUTING- 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL THE FOLLOWING TOOLS WAS INCLUDED WITH DELIVERY: -I CHANGE HEAD SET, AUTOM. ADJUSTABLE - I INDIA RADIUS CUTTER SET FOR FK R = 2 MM 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGES, WITH QUICK CHANGE HEADS 3.8 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGES, WITH QUICK CHANGE HEADS 3.9 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: CHANGE: -CUSTOMIZED EXHAUST HOODS, SO THAT HIGHER EDGE OVERHANGS CAN BE DRIVEN. EXAMPLE: 25MM 16 MM PANEL THICKNESS EDGE HEIGHT (OR 23 MM / 33 MM) OTHER ACCESSORIES WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE F&ATILDE;&FRAC14;GEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. WORKPIECE SUPPORT IN SCISSOR DESIGN -WITH ROLL COATING, MAX. 1000 MM EXTENDABLE REMOTE CONTROL FOR AMBITION AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -MULTI SCRAPER MN21 AUTOMATICALLY INSTEAD OF 2XPN10, TO AUTOMATICALLY CONVERT DIFFERENT RADIUS OR CHAMFER -ELECTRONIC HEIGHT ADJUSTMENT DETERGENT SPRAY UNIT TOP/BOTTOM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine mesh 20l<br><br>mesh bag packaging machine. designed to handle pe mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc.. full stainless steel version, plc controller and touch screen. print mark sensor. suitable films: pe-net, net-film combinations, etc. bag styles: pillow, gusset and gusset bag with handle holes. - specifiations: film width: max. 620mm | bag length: 100-380mm | bag width: 110-300mm | max. speed of the machine in neutral: : max. 20 cycles/minute | compressed air: 0,36m³/6bar | power: 220v, 3kw.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE MESH 20L

MESH BAG PACKAGING MACHINE. DESIGNED TO HANDLE PE MESH FILM TO MAKE PILLOW OR GUSSET BAGS, SUITABLE FOR PACKING FRESH VEGETABLE AND FRUITS SUCH AS POTATOES, ONIONS, APPLES, CABBAGE, PEAS, CARROTS, PEARS, LEMONS, GRAPEFRUITS, KIWI, ETC.. FULL STAINLESS STEEL VERSION, PLC CONTROLLER AND TOUCH SCREEN. PRINT MARK SENSOR. SUITABLE FILMS: PE-NET, NET-FILM COMBINATIONS, ETC. BAG STYLES: PILLOW, GUSSET AND GUSSET BAG WITH HANDLE HOLES. - SPECIFIATIONS: FILM WIDTH: MAX. 620MM | BAG LENGTH: 100-380MM | BAG WIDTH: 110-300MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: : MAX. 20 CYCLES/MINUTE | COMPRESSED AIR: 0,36M³/6BAR | POWER: 220V, 3KW.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit
-glue joint scraper
-schwabbelaggregat

power contraol pc 22

technical data:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

amenities:
-workpiece support scissor design kal
210/6
-workpiece thickness 60 mm site. 40 mm
-workpiece thickness 8 mm kal200/300/kfl500
-order unit pu (changeable
-qa glue container front piece (removable)
-automation package chamfer/radius
kal210/6/a20
-vertical double roll keying
-work guide for fk device
i change head set for form milling fk
-i india radius cutter set r = 1,5-3 mm ambition
-detergent spraying unit top/bottom
ambition
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT POWER CONTRAOL PC 22 TECHNICAL DATA: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK11 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 7755 MM -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; AMENITIES: -WORKPIECE SUPPORT SCISSOR DESIGN KAL 210/6 -WORKPIECE THICKNESS 60 MM SITE. 40 MM -WORKPIECE THICKNESS 8 MM KAL200/300/KFL500 -ORDER UNIT PU (CHANGEABLE -QA GLUE CONTAINER FRONT PIECE (REMOVABLE) -AUTOMATION PACKAGE CHAMFER/RADIUS KAL210/6/A20 -VERTICAL DOUBLE ROLL KEYING -WORK GUIDE FOR FK DEVICE I CHANGE HEAD SET FOR FORM MILLING FK -I INDIA RADIUS CUTTER SET R = 1,5-3 MM AMBITION -DETERGENT SPRAYING UNIT TOP/BOTTOM AMBITION
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-capacity: 20000  l/h<br />co2 connection pressure: 8 -10  bar    <br />power consumption: 46 kva<br />operation / control:  control voltage 24 v dc<br />equipment: saturation tank (d=750 mm) with fill level detectors as a carbonisation tank, measuring writer (abb), circulatin pumpt (hilge), various ventilssaturation tank (d=750 mm) with fill level detectors as a carbonisation tank<br /> CAPACITY: 20000 L/H
CO2 CONNECTION PRESSURE: 8 -10 BAR
POWER CONSUMPTION: 46 KVA
OPERATION / CONTROL: CONTROL VOLTAGE 24 V DC
EQUIPMENT: SATURATION TANK (D=750 MM) WITH FILL LEVEL DETECTORS AS A CARBONISATION TANK, MEASURING WRITER (ABB), CIRCULATIN PUMPT (HILGE), VARIOUS VENTILSSATURATION TANK (D=750 MM) WITH FILL LEVEL DETECTORS AS A CARBONISATION TANK
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-1 combined king - cut rolls plant kgv combi 2000/40-(dd)-k6/4p-vo-

schn6/b-mo(wb-3)800-ab (1000/1300)

1 large dough hopper trã? 240

1 rex - machine type industry ii t 6 / 5 / 4 / 3 s-i, mod.

working width 800 mm
 

1 transverse discharge on investment side

1 wasserbadmohner mo(wb-3) 800

1 honing device type industry abi 800 (1000) (1300),.

working width 800 mm 1 COMBINED KING - CUT ROLLS PLANT KGV COMBI 2000/40-(DD)-K6/4P-VO- SCHN6/B-MO(WB-3)800-AB (1000/1300) 1 LARGE DOUGH HOPPER TR&ATILDE;? 240 1 REX - MACHINE TYPE INDUSTRY II T 6 / 5 / 4 / 3 S-I, MOD. WORKING WIDTH 800 MM 1 TRANSVERSE DISCHARGE ON INVESTMENT SIDE 1 WASSERBADMOHNER MO(WB-3) 800 1 HONING DEVICE TYPE INDUSTRY ABI 800 (1000) (1300),. WORKING WIDTH 800 MM
Vendedor: Klaudia Sarnowska
Año de construcción: usado
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-weight approx.: 3450 kg<br/>dimensions (l x w x h) approx.: 7500 x 1200 x 1900 mm<br/>description: max. panel width 4500 mm max. panel length 2200 mm max. saw blade projection 115 mm lift table front support tables no. tables 4 grippers on pusher fence no. grippers 6 saw carriage saw unit motor power 18 kw r.p.m. 3400 rpm scoring unit motor power 2.2 kw r.p.m. 3400 rpm safety standard ce mark WEIGHT APPROX.: 3450 KG
DIMENSIONS (L X W X H) APPROX.: 7500 X 1200 X 1900 MM
DESCRIPTION: MAX. PANEL WIDTH 4500 MM MAX. PANEL LENGTH 2200 MM MAX. SAW BLADE PROJECTION 115 MM LIFT TABLE FRONT SUPPORT TABLES NO. TABLES 4 GRIPPERS ON PUSHER FENCE NO. GRIPPERS 6 SAW CARRIAGE SAW UNIT MOTOR POWER 18 KW R.P.M. 3400 RPM SCORING UNIT MOTOR POWER 2.2 KW R.P.M. 3400 RPM SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-20 ton package deals of electro motors, from 11kw to 75kw capacity. all electric motors in running condition dismantled, offered on as is where is basis. by producers such as e.g. schorch, leroy somer, abb etc. only offered as mixed lot, most electromotors 1.500rpm, some 3.000 rpm 20 TON PACKAGE DEALS OF ELECTRO MOTORS, FROM 11KW TO 75KW CAPACITY. ALL ELECTRIC MOTORS IN RUNNING CONDITION DISMANTLED, OFFERED ON AS IS WHERE IS BASIS. BY PRODUCERS SUCH AS E.G. SCHORCH, LEROY SOMER, ABB ETC. ONLY OFFERED AS MIXED LOT, MOST ELECTROMOTORS 1.500RPM, SOME 3.000 RPM
Vendedor: HOS BV
Año de construcción: usado
Ubicación: Land-faceplate diameter:8000 mm<br/>swing diameter:10000 mm<br/>turning height:4500 mm<br/>workpiece weight:120/200 t<br/>table speeds:0.2-16 u/min (2 stufen) <br/>max. torque on the faceplate:200/460  k.nm<br/>slide stroke:vertikal: 2300 mm<br/>slide stroke:horizontal: 5300 mm<br/>cross section of ram:300x300 mm<br/>max. cutting force of tool head :links: 63 kn / rechts: 80 kn <br/>cross rail travel :2000 mm<br/>rapid feed cross beam:300 mm/min<br/>feed stepless:x-achse: 1-500 mm/min<br/>main drive:110 kw<br/>weight of the machine ca.:270 t<br/>machine size (lxwxh):14000x10000x9000 mm<br/>control:siemens 828d/siemens 840d <br/>: <br/>: <br/>: <br/>workbench: <br/>: <br/>worktool support (a-axis):2 stück<br/>operating manual: <br/>control cabinet siemens plc: <br/>: <br/>: <br/>:1 stück<br/>rams:1 stück konventioneller und 1 stück cnc-stößel <br/>ce-design:inkl. zertifikat <br/>: <br/>european electric:schneider, siemens, abb oder ähnlich <br/>4 jaw chuck: <br/>servo motors:von siemens <br/>sps machine control:von siemens <br/>linear scales: <br/>workpiece measurement system: <br/>c-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>turret: <br/>tool measuring system: <br/>semi guarding: <br/><br/>for more information please check attached pdf file on the right hand side FACEPLATE DIAMETER:8000 MM
SWING DIAMETER:10000 MM
TURNING HEIGHT:4500 MM
WORKPIECE WEIGHT:120/200 T
TABLE SPEEDS:0.2-16 U/MIN (2 STUFEN)
MAX. TORQUE ON THE FACEPLATE:200/460 K.NM
SLIDE STROKE:VERTIKAL: 2300 MM
SLIDE STROKE:HORIZONTAL: 5300 MM
CROSS SECTION OF RAM:300X300 MM
MAX. CUTTING FORCE OF TOOL HEAD :LINKS: 63 KN / RECHTS: 80 KN
CROSS RAIL TRAVEL :2000 MM
RAPID FEED CROSS BEAM:300 MM/MIN
FEED STEPLESS:X-ACHSE: 1-500 MM/MIN
MAIN DRIVE:110 KW
WEIGHT OF THE MACHINE CA.:270 T
MACHINE SIZE (LXWXH):14000X10000X9000 MM
CONTROL:SIEMENS 828D/SIEMENS 840D
:
:
:
WORKBENCH:
:
WORKTOOL SUPPORT (A-AXIS):2 STüCK
OPERATING MANUAL:
CONTROL CABINET SIEMENS PLC:
:
:
:1 STüCK
RAMS:1 STüCK KONVENTIONELLER UND 1 STüCK CNC-STößEL
CE-DESIGN:INKL. ZERTIFIKAT
:
EUROPEAN ELECTRIC:SCHNEIDER, SIEMENS, ABB ODER äHNLICH
4 JAW CHUCK:
SERVO MOTORS:VON SIEMENS
SPS MACHINE CONTROL:VON SIEMENS
LINEAR SCALES:
WORKPIECE MEASUREMENT SYSTEM:
C-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
TURRET:
TOOL MEASURING SYSTEM:
SEMI GUARDING:

FOR MORE INFORMATION PLEASE CHECK ATTACHED PDF FILE ON THE RIGHT HAND SIDE
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-all stainless steel
2 front discharge guards
2 abb engines (2 x 22 kw)
capacity drum ± 2.300 x 1.850 x 1.000 mm (4.000l)
loading : ± 3.200/3.500l (depending on the product)
loading height ± 2.800 mm
discharging height  ± 1.550 mm
dimensions (l x w x h) : ± 3.750 x 2.100 x 2.800 mm
total height for transport ± 2.700 mm
with new control box
 ALL STAINLESS STEEL 2 FRONT DISCHARGE GUARDS 2 ABB ENGINES (2 X 22 KW) CAPACITY DRUM ± 2.300 X 1.850 X 1.000 MM (4.000L) LOADING : ± 3.200/3.500L (DEPENDING ON THE PRODUCT) LOADING HEIGHT ± 2.800 MM DISCHARGING HEIGHT ± 1.550 MM DIMENSIONS (L X W X H) : ± 3.750 X 2.100 X 2.800 MM TOTAL HEIGHT FOR TRANSPORT ± 2.700 MM WITH NEW CONTROL BOX
Vendedor: Barsso NV
Año de construcción: usado
Ubicación: Land-faceplate diameter:6300 mm<br/>swing diameter:8000 mm<br/>turning height:4000 mm<br/>workpiece weight:120 t<br/>table speeds:0.2-16 u/min (2 stufen) <br/>max. torque on the faceplate:200/460  k.nm<br/>slide stroke:vertikal: 2500 mm<br/>slide stroke:horizontal: 4350 mm<br/>cross section of ram:280x280 mm<br/>max. cutting force of tool head :links: 63 kn / rechts: 80 kn <br/>cross rail travel :2000 mm<br/>rapid feed cross beam:300 mm/min<br/>feed stepless:x-achse: 1-500 mm/min<br/>main drive:110 kw<br/>weight of the machine ca.:190 t<br/>machine size (lxwxh):11000x9000x8000 mm<br/>control:siemens 828d/siemens 840d <br/>: <br/>: <br/>: <br/>workbench: <br/>: <br/>worktool support (a-axis):2 stück<br/>operating manual: <br/>control cabinet siemens plc: <br/>: <br/>: <br/>:1 stück<br/>rams:1 stück konventioneller und 1 stück cnc-stößel <br/>ce-design:inkl. zertifikat <br/>: <br/>european electric:schneider, siemens, abb oder ähnlich <br/>4 jaw chuck: <br/>servo motors:von siemens <br/>sps machine control:von siemens <br/>linear scales: <br/>workpiece measurement system: <br/>c-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>turret: <br/>tool measuring system: <br/>semi guarding: <br/><br/>for more information please check attached pdf file on the right hand side FACEPLATE DIAMETER:6300 MM
SWING DIAMETER:8000 MM
TURNING HEIGHT:4000 MM
WORKPIECE WEIGHT:120 T
TABLE SPEEDS:0.2-16 U/MIN (2 STUFEN)
MAX. TORQUE ON THE FACEPLATE:200/460 K.NM
SLIDE STROKE:VERTIKAL: 2500 MM
SLIDE STROKE:HORIZONTAL: 4350 MM
CROSS SECTION OF RAM:280X280 MM
MAX. CUTTING FORCE OF TOOL HEAD :LINKS: 63 KN / RECHTS: 80 KN
CROSS RAIL TRAVEL :2000 MM
RAPID FEED CROSS BEAM:300 MM/MIN
FEED STEPLESS:X-ACHSE: 1-500 MM/MIN
MAIN DRIVE:110 KW
WEIGHT OF THE MACHINE CA.:190 T
MACHINE SIZE (LXWXH):11000X9000X8000 MM
CONTROL:SIEMENS 828D/SIEMENS 840D
:
:
:
WORKBENCH:
:
WORKTOOL SUPPORT (A-AXIS):2 STüCK
OPERATING MANUAL:
CONTROL CABINET SIEMENS PLC:
:
:
:1 STüCK
RAMS:1 STüCK KONVENTIONELLER UND 1 STüCK CNC-STößEL
CE-DESIGN:INKL. ZERTIFIKAT
:
EUROPEAN ELECTRIC:SCHNEIDER, SIEMENS, ABB ODER äHNLICH
4 JAW CHUCK:
SERVO MOTORS:VON SIEMENS
SPS MACHINE CONTROL:VON SIEMENS
LINEAR SCALES:
WORKPIECE MEASUREMENT SYSTEM:
C-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
TURRET:
TOOL MEASURING SYSTEM:
SEMI GUARDING:

FOR MORE INFORMATION PLEASE CHECK ATTACHED PDF FILE ON THE RIGHT HAND SIDE
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-hedelius machining centre cb 60 3-axis machine with 4 axes control - built in 1999
numerical control heidenhain tnc 426
22.0 kw main spindle drive 30-6000 min-1
november 2018 usage new spindle
30-fach tool magazine iso 40
fixed machine table
traverse paths: x axis: 2100 mm
y-axis: 620 mm
z-axis: 520 mm
reciprocating motion: 800 x 620 mm
spindle &gt; &lt; table: 140-660 mm
operation handset 410/426/430
spindle speed 8000
torque 50-100
scratch band promotion 60 x 2100
internal coolant supply / ikz
-central coolant supply through the work spindle
-complete with separately-standing band filter system & additional
duplex filter
pistols abblas
working space partition 60
 HEDELIUS MACHINING CENTRE CB 60 3-AXIS MACHINE WITH 4 AXES CONTROL - BUILT IN 1999 NUMERICAL CONTROL HEIDENHAIN TNC 426 22.0 KW MAIN SPINDLE DRIVE 30-6000 MIN-1 NOVEMBER 2018 USAGE NEW SPINDLE 30-FACH TOOL MAGAZINE ISO 40 FIXED MACHINE TABLE TRAVERSE PATHS: X AXIS: 2100 MM Y-AXIS: 620 MM Z-AXIS: 520 MM RECIPROCATING MOTION: 800 X 620 MM SPINDLE &GT; &LT; TABLE: 140-660 MM OPERATION HANDSET 410/426/430 SPINDLE SPEED 8000 TORQUE 50-100 SCRATCH BAND PROMOTION 60 X 2100 INTERNAL COOLANT SUPPLY / IKZ -CENTRAL COOLANT SUPPLY THROUGH THE WORK SPINDLE -COMPLETE WITH SEPARATELY-STANDING BAND FILTER SYSTEM & ADDITIONAL DUPLEX FILTER PISTOLS ABBLAS WORKING SPACE PARTITION 60
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-faceplate diameter:1000 mm<br/>swing diameter:1500 mm<br/>turning height:1000 mm<br/>max. turning diameter:1250 mm<br/>table speeds:4~500  1/min<br/>max. torque on the faceplate:6 knm<br/>transmission ratio:2 stück<br/>max. workpiece weight:5 t<br/>rapid power traverse in x-and z direction:12 m/min<br/>travel of ram (vertical):620 mm<br/>travel of ram (horiz.):800 mm<br/>power maindrive:30 kw<br/>weight of the machine ca.:18 t<br/>machine size (lxwxh):4850×5000×4100 mm<br/>total power requirement:65 kva<br/>positioning accuracy:0.030 mm<br/>repeating accuracy:0,015 mm<br/>cnc controller:siemens 828d basic + shop turn <br/>automatic tool changer:8-fach, elektrisch und programmierbar <br/>4 jaw chuck:1000 mm<br/>gear box:von zf <br/>:led <br/>servo motors:vom steuerungshersteller <br/>heat exchanger: <br/>automatic lubrication system: <br/>tools: <br/>: <br/>signal lamp: <br/>linear scales and ballscrew:von hiwin (taiwan) <br/>hydr. components: <br/>chip conveyor with chip bucket: <br/>spindle oil cooler: <br/>european electric:überwiegend von abb, telemechanique <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>hydr. components:seven ocean / kompass (taiwan) <br/>cnc controls from:fanuc 0i tf <br/><br/>product presentation  perform quality control in the whole process features standardization modular and universalization finite element analysis realizes optimize design; compact structure; full protection cover,good chip removal, provide customers safe and clean working environment. low gravity center structure design is convenient for loading and unloading workpiece. 90 ° rotating control panel ,more humanized interface;  ce certificate    machine bed:  symmetric overall structure, the thermal deformation is small column is located on the base, good rigidity  column using sand sealing structure, good vibration absorbing  column base combined with rubber pad, heat insulation and vibration absorption  beam adopts hierarchical positioning, realize heavy cutting  beam lifting system beam lifting system    to ensure the largest cutting capacity. greatly improve the beam displacement positioning accuracy;  after the position adjustment, automatic clamping by cylinder fixed to ensure accuracy; ensure the different heights of workpieces in shortest ram overhanging it is convenient for processing any height of workpiece in the 0 ~ 1000mm low & filtering alarm equipment oil cooling machine     driving system;   large cutting capacity motor: a40;  power 37kw zf speed reducer imported from germany machine body casting;    casting machining process: roughness machining first aging treatment second roughness machining second aging treatment semi finishing finish machining  neway casting company    80% machine casting is made by neway casting company, we control the quality from the very start. ?neway? logo and casting track number on all castings.   FACEPLATE DIAMETER:1000 MM
SWING DIAMETER:1500 MM
TURNING HEIGHT:1000 MM
MAX. TURNING DIAMETER:1250 MM
TABLE SPEEDS:4~500 1/MIN
MAX. TORQUE ON THE FACEPLATE:6 KNM
TRANSMISSION RATIO:2 STüCK
MAX. WORKPIECE WEIGHT:5 T
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:12 M/MIN
TRAVEL OF RAM (VERTICAL):620 MM
TRAVEL OF RAM (HORIZ.):800 MM
POWER MAINDRIVE:30 KW
WEIGHT OF THE MACHINE CA.:18 T
MACHINE SIZE (LXWXH):4850×5000×4100 MM
TOTAL POWER REQUIREMENT:65 KVA
POSITIONING ACCURACY:0.030 MM
REPEATING ACCURACY:0,015 MM
CNC CONTROLLER:SIEMENS 828D BASIC + SHOP TURN
AUTOMATIC TOOL CHANGER:8-FACH, ELEKTRISCH UND PROGRAMMIERBAR
4 JAW CHUCK:1000 MM
GEAR BOX:VON ZF
:LED
SERVO MOTORS:VOM STEUERUNGSHERSTELLER
HEAT EXCHANGER:
AUTOMATIC LUBRICATION SYSTEM:
TOOLS:
:
SIGNAL LAMP:
LINEAR SCALES AND BALLSCREW:VON HIWIN (TAIWAN)
HYDR. COMPONENTS:
CHIP CONVEYOR WITH CHIP BUCKET:
SPINDLE OIL COOLER:
EUROPEAN ELECTRIC:üBERWIEGEND VON ABB, TELEMECHANIQUE
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
HYDR. COMPONENTS:SEVEN OCEAN / KOMPASS (TAIWAN)
CNC CONTROLS FROM:FANUC 0I TF

PRODUCT PRESENTATION PERFORM QUALITY CONTROL IN THE WHOLE PROCESS FEATURES STANDARDIZATION MODULAR AND UNIVERSALIZATION FINITE ELEMENT ANALYSIS REALIZES OPTIMIZE DESIGN; COMPACT STRUCTURE; FULL PROTECTION COVER,GOOD CHIP REMOVAL, PROVIDE CUSTOMERS SAFE AND CLEAN WORKING ENVIRONMENT. LOW GRAVITY CENTER STRUCTURE DESIGN IS CONVENIENT FOR LOADING AND UNLOADING WORKPIECE. 90 ° ROTATING CONTROL PANEL ,MORE HUMANIZED INTERFACE; CE CERTIFICATE MACHINE BED: SYMMETRIC OVERALL STRUCTURE, THE THERMAL DEFORMATION IS SMALL COLUMN IS LOCATED ON THE BASE, GOOD RIGIDITY COLUMN USING SAND SEALING STRUCTURE, GOOD VIBRATION ABSORBING COLUMN BASE COMBINED WITH RUBBER PAD, HEAT INSULATION AND VIBRATION ABSORPTION BEAM ADOPTS HIERARCHICAL POSITIONING, REALIZE HEAVY CUTTING BEAM LIFTING SYSTEM BEAM LIFTING SYSTEM TO ENSURE THE LARGEST CUTTING CAPACITY. GREATLY IMPROVE THE BEAM DISPLACEMENT POSITIONING ACCURACY; AFTER THE POSITION ADJUSTMENT, AUTOMATIC CLAMPING BY CYLINDER FIXED TO ENSURE ACCURACY; ENSURE THE DIFFERENT HEIGHTS OF WORKPIECES IN SHORTEST RAM OVERHANGING IT IS CONVENIENT FOR PROCESSING ANY HEIGHT OF WORKPIECE IN THE 0 ~ 1000MM LOW & FILTERING ALARM EQUIPMENT OIL COOLING MACHINE DRIVING SYSTEM; LARGE CUTTING CAPACITY MOTOR: A40; POWER 37KW ZF SPEED REDUCER IMPORTED FROM GERMANY MACHINE BODY CASTING; CASTING MACHINING PROCESS: ROUGHNESS MACHINING FIRST AGING TREATMENT SECOND ROUGHNESS MACHINING SECOND AGING TREATMENT SEMI FINISHING FINISH MACHINING NEWAY CASTING COMPANY 80% MACHINE CASTING IS MADE BY NEWAY CASTING COMPANY, WE CONTROL THE QUALITY FROM THE VERY START. ?NEWAY? LOGO AND CASTING TRACK NUMBER ON ALL CASTINGS.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-man b&w 9l32/40 diesel gensets for sale

diesel engine info; 

serial no: 1063151 -- built year: 1998 -- power : 4320 kw -- rev: 720 rpm 

alternator info;

maker: abb -- type: hsg 0900mp10 -- serial no: 4560744 -- year: 1998 

power: 5230 kva    MAN B&W 9L32/40 DIESEL GENSETS FOR SALE DIESEL ENGINE INFO; SERIAL NO: 1063151 -- BUILT YEAR: 1998 -- POWER : 4320 KW -- REV: 720 RPM ALTERNATOR INFO; MAKER: ABB -- TYPE: HSG 0900MP10 -- SERIAL NO: 4560744 -- YEAR: 1998 POWER: 5230 KVA
Vendedor: DEPA MARINE
Año de construcción: usado
Ubicación: Land-weight approx.: 450 kg<br/>dimensions (l x w x h) approx.: 1100 x 800 x 1700 mm<br/>description: rated voltage 24 kv, withstand impulse voltage 125 kv, network breaking current 400 a WEIGHT APPROX.: 450 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 800 X 1700 MM
DESCRIPTION: RATED VOLTAGE 24 KV, WITHSTAND IMPULSE VOLTAGE 125 KV, NETWORK BREAKING CURRENT 400 A
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-for sale one steam turbine  ansaldo/abb 55 mw
belonging to a combined cycle thermal plant. very good condition , description, photos and service documentation available on request.
the plant installed in 2000 has been stopped in 2015, for administrative reasons, no for technical reasons. it is in excellent condition. during his work life it has been serviced by ansaldo . the ansaldo equipment has been revisioned, mantained and serviced  following the full service-mantenance contract signed by ansaldo and plant owners.
complete documentation of ansaldo works on turbines, generators is visible at plant offices, so it can be useful to get an idea of main machines conditions .
it can be sold as it is or revisioned.  FOR SALE ONE STEAM TURBINE ANSALDO/ABB 55 MW BELONGING TO A COMBINED CYCLE THERMAL PLANT. VERY GOOD CONDITION , DESCRIPTION, PHOTOS AND SERVICE DOCUMENTATION AVAILABLE ON REQUEST. THE PLANT INSTALLED IN 2000 HAS BEEN STOPPED IN 2015, FOR ADMINISTRATIVE REASONS, NO FOR TECHNICAL REASONS. IT IS IN EXCELLENT CONDITION. DURING HIS WORK LIFE IT HAS BEEN SERVICED BY ANSALDO . THE ANSALDO EQUIPMENT HAS BEEN REVISIONED, MANTAINED AND SERVICED FOLLOWING THE FULL SERVICE-MANTENANCE CONTRACT SIGNED BY ANSALDO AND PLANT OWNERS. COMPLETE DOCUMENTATION OF ANSALDO WORKS ON TURBINES, GENERATORS IS VISIBLE AT PLANT OFFICES, SO IT CAN BE USEFUL TO GET AN IDEA OF MAIN MACHINES CONDITIONS . IT CAN BE SOLD AS IT IS OR REVISIONED.
Vendedor: STOCKEUROSTOCK SRL
Año de construcción: usado
Ubicación: Land-weight approx.: 480 kg<br/>dimensions (l x w x h) approx.: 1350 x 1000 x 1700 mm<br/>description: rated voltage 24 kv, withstand impulse voltage 125 kv, network breaking current 630 a WEIGHT APPROX.: 480 KG
DIMENSIONS (L X W X H) APPROX.: 1350 X 1000 X 1700 MM
DESCRIPTION: RATED VOLTAGE 24 KV, WITHSTAND IMPULSE VOLTAGE 125 KV, NETWORK BREAKING CURRENT 630 A
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 28.000 €
Ubicación: Land-ladies and gentlemen,

we have used transformer station

year of constr.: 2015 was only half a year to the network.
performance: 800kva
concrete construction uk 2000 800kva 10kv-400v 50 hz primary voltage: 10kv can be exchanged to kv transformer a 20 since ms has 24 kv.
secondary voltage: 400v, groupset: dyn5
switchgear: sf6

ready and available, nationwide cheaper delivery.
if you have more questions mr serhan is here for you,
 available monday to saturday from 8: 00 to 10: 00 and in emergencies 24 hours LADIES AND GENTLEMEN, WE HAVE USED TRANSFORMER STATION YEAR OF CONSTR.: 2015 WAS ONLY HALF A YEAR TO THE NETWORK. PERFORMANCE: 800KVA CONCRETE CONSTRUCTION UK 2000 800KVA 10KV-400V 50 HZ PRIMARY VOLTAGE: 10KV CAN BE EXCHANGED TO KV TRANSFORMER A 20 SINCE MS HAS 24 KV. SECONDARY VOLTAGE: 400V, GROUPSET: DYN5 SWITCHGEAR: SF6 READY AND AVAILABLE, NATIONWIDE CHEAPER DELIVERY. IF YOU HAVE MORE QUESTIONS MR SERHAN IS HERE FOR YOU, AVAILABLE MONDAY TO SATURDAY FROM 8: 00 TO 10: 00 AND IN EMERGENCIES 24 HOURS
Vendedor: M&S EXPORT
Año de construcción: usado
Ubicación: Land-weight approx.: 680 kg<br/>dimensions (l x w x h) approx.: 1400 x 1600 x 1500 mm<br/>description: industrial robot with control cabinet and teach-in tablet. WEIGHT APPROX.: 680 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1600 X 1500 MM
DESCRIPTION: INDUSTRIAL ROBOT WITH CONTROL CABINET AND TEACH-IN TABLET.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition

technical parameters:

-crawler width 300 mm
-cutting height 120 mm
-spindle 80 mm

-power of engine 38 kw
-adjustable feed rate on the inverter
-the maximum diameter of the discs 350 mm
-central lubrication g?siennicy

-production of italian restaurants
– power supply 380v
-diameter 150 mm

track in good condition.
recommendable machine

very quietly working as saws are mounted on the axle of the motor.
the feed is on the inverter which allows precise setting.

overall dimensions of the machine:

-length: 210 cm
width 150 cm
-height 160 cm
-weight approx. 1200 kg -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION TECHNICAL PARAMETERS: -CRAWLER WIDTH 300 MM -CUTTING HEIGHT 120 MM -SPINDLE 80 MM -POWER OF ENGINE 38 KW -ADJUSTABLE FEED RATE ON THE INVERTER -THE MAXIMUM DIAMETER OF THE DISCS 350 MM -CENTRAL LUBRICATION G?SIENNICY -PRODUCTION OF ITALIAN RESTAURANTS – POWER SUPPLY 380V -DIAMETER 150 MM TRACK IN GOOD CONDITION. RECOMMENDABLE MACHINE VERY QUIETLY WORKING AS SAWS ARE MOUNTED ON THE AXLE OF THE MOTOR. THE FEED IS ON THE INVERTER WHICH ALLOWS PRECISE SETTING. OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 210 CM WIDTH 150 CM -HEIGHT 160 CM -WEIGHT APPROX. 1200 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-weight approx.: 2100 kg<br/>dimensions (l x w x h) approx.: 3200 x 1200 x 1900 mm<br/>description: industrial robot with control cabinet and teach-in tablet. WEIGHT APPROX.: 2100 KG
DIMENSIONS (L X W X H) APPROX.: 3200 X 1200 X 1900 MM
DESCRIPTION: INDUSTRIAL ROBOT WITH CONTROL CABINET AND TEACH-IN TABLET.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-60 mw ge lm6000 pc gas turbine power plant
50 mw ge lm6000 pc gas turbine, year of manufacture: 2011, hours since new: 7000 hrs., 3000 rpm, 50 hz, 13 mw siemens sst 300 steam turbine,  year of manufacture: 2012, hours since new: 5000 hrs, transformers, electrical systems, control systems, air system, cooling system, starting system, lubricating system, air compressors, hv system, mv system, lv system, abb pumps, demi water systems, fire fighting system and much more. complete plant in new condition, can be inspected in operation.
60 MW GE LM6000 PC GAS TURBINE POWER PLANT 50 MW GE LM6000 PC GAS TURBINE, YEAR OF MANUFACTURE: 2011, HOURS SINCE NEW: 7000 HRS., 3000 RPM, 50 HZ, 13 MW SIEMENS SST 300 STEAM TURBINE, YEAR OF MANUFACTURE: 2012, HOURS SINCE NEW: 5000 HRS, TRANSFORMERS, ELECTRICAL SYSTEMS, CONTROL SYSTEMS, AIR SYSTEM, COOLING SYSTEM, STARTING SYSTEM, LUBRICATING SYSTEM, AIR COMPRESSORS, HV SYSTEM, MV SYSTEM, LV SYSTEM, ABB PUMPS, DEMI WATER SYSTEMS, FIRE FIGHTING SYSTEM AND MUCH MORE. COMPLETE PLANT IN NEW CONDITION, CAN BE INSPECTED IN OPERATION.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Ubicación: Land-weight approx.: 680 kg<br/>dimensions (l x w x h) approx.: 1200 x 2000 x 1500 mm<br/>description: industrial robot with control cabinet and teach-in tablet. WEIGHT APPROX.: 680 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 2000 X 1500 MM
DESCRIPTION: INDUSTRIAL ROBOT WITH CONTROL CABINET AND TEACH-IN TABLET.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-95 mw wartsila natural gas generator plant

(6) 8730 kw wartsila 20v34sg gas engines and (6) 6970 kw wartsila 16v34sg natural gas engines with abb alternators, total twelve generator sets, fuel: natural gas, year of manufacture 2006 to 2009, 11 kv, 50 hz, cooling system, lubricating oil system, control and monitoring system, electrical system, transformers, pumps, air system, exhaust gas system, compressed air system, heat recovery steam generators, tanks and much more. complete plant with all auxiliaries. well maintained by oem since new with all service records on site. priced for immediate sale.
95 MW WARTSILA NATURAL GAS GENERATOR PLANT (6) 8730 KW WARTSILA 20V34SG GAS ENGINES AND (6) 6970 KW WARTSILA 16V34SG NATURAL GAS ENGINES WITH ABB ALTERNATORS, TOTAL TWELVE GENERATOR SETS, FUEL: NATURAL GAS, YEAR OF MANUFACTURE 2006 TO 2009, 11 KV, 50 HZ, COOLING SYSTEM, LUBRICATING OIL SYSTEM, CONTROL AND MONITORING SYSTEM, ELECTRICAL SYSTEM, TRANSFORMERS, PUMPS, AIR SYSTEM, EXHAUST GAS SYSTEM, COMPRESSED AIR SYSTEM, HEAT RECOVERY STEAM GENERATORS, TANKS AND MUCH MORE. COMPLETE PLANT WITH ALL AUXILIARIES. WELL MAINTAINED BY OEM SINCE NEW WITH ALL SERVICE RECORDS ON SITE. PRICED FOR IMMEDIATE SALE.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Ubicación: Land-weight approx.: 680 kg<br/>dimensions (l x w x h) approx.: 1600 x 1600 x 2000 mm<br/>description: industrial robot with control cabinet and teach-in tablet. WEIGHT APPROX.: 680 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 1600 X 2000 MM
DESCRIPTION: INDUSTRIAL ROBOT WITH CONTROL CABINET AND TEACH-IN TABLET.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1 €
Ubicación: Land-4 rectivar rtv 84d72q 
16 atv 71. 37 kw 50hp
13 atv 71. 30kw 40hp
4 simore de master siemen
4  eurotherme  alt 690
19 eurotherme alt 590
8 variateur dcs 800
20 variateur abb  4 RECTIVAR RTV 84D72Q 16 ATV 71. 37 KW 50HP 13 ATV 71. 30KW 40HP 4 SIMORE DE MASTER SIEMEN 4 EUROTHERME ALT 690 19 EUROTHERME ALT 590 8 VARIATEUR DCS 800 20 VARIATEUR ABB
Vendedor: sasu zotoff
Año de construcción: usado
Ubicación: Land-weight approx.: 2300 kg<br/>dimensions (l x w x h) approx.: 2200 x 2100 x 1900 mm<br/>description: industrial robot with control cabinet and teach-in tablet. WEIGHT APPROX.: 2300 KG
DIMENSIONS (L X W X H) APPROX.: 2200 X 2100 X 1900 MM
DESCRIPTION: INDUSTRIAL ROBOT WITH CONTROL CABINET AND TEACH-IN TABLET.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1 
Ubicación: Land-rtv 84d72q  RTV 84D72Q
Vendedor: sasu zotoff
Año de construcción: usado
Ubicación: Land-weight approx.: 1600 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 2100 mm<br/>description: industrial robot with control cabinet and teach-in tablet. WEIGHT APPROX.: 1600 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 2100 MM
DESCRIPTION: INDUSTRIAL ROBOT WITH CONTROL CABINET AND TEACH-IN TABLET.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-stock# ug6240
used stainless steel two-stage piston homogenizer manufactured by tetra pak (sweden) model tetra alex 20. capacity up to 5000 l/h at 160 bar pressure. number of pistons: 3. piston diameter: 50 mm. piston material: stainless steel. main drive: abb electric motor 30 kw, 400 v, 50 hz, 1475 rpm, ip55. hydraulic drive: 0.25 kw, 400 v, 50 hz, 1410 rpm, ip55. cooling water requirements: 130 l/h. stainless steel covers included. weight: 1355 kg. STOCK# UG6240 USED STAINLESS STEEL TWO-STAGE PISTON HOMOGENIZER MANUFACTURED BY TETRA PAK (SWEDEN) MODEL TETRA ALEX 20. CAPACITY UP TO 5000 L/H AT 160 BAR PRESSURE. NUMBER OF PISTONS: 3. PISTON DIAMETER: 50 MM. PISTON MATERIAL: STAINLESS STEEL. MAIN DRIVE: ABB ELECTRIC MOTOR 30 KW, 400 V, 50 HZ, 1475 RPM, IP55. HYDRAULIC DRIVE: 0.25 KW, 400 V, 50 HZ, 1410 RPM, IP55. COOLING WATER REQUIREMENTS: 130 L/H. STAINLESS STEEL COVERS INCLUDED. WEIGHT: 1355 KG.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Ubicación: Land-weight approx.: 680 kg<br/>dimensions (l x w x h) approx.: 1400 x 1600 x 1500 mm<br/>description: industrial robot with control cabinet and teach-in tablet. WEIGHT APPROX.: 680 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1600 X 1500 MM
DESCRIPTION: INDUSTRIAL ROBOT WITH CONTROL CABINET AND TEACH-IN TABLET.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-no. 04043

mobile extraction system/clean air device coral prvn

used, very good condition
vacuum system, very strong suction power
400 v / 2,2 kw abb engine
2 new filter cartridges
manual cleaning
2 shaving container 40 cm diameter x 80 cm height
extraction adapter 140 mm
transport dimensions: 1200 x 1000 x 2350 mm, approx. 250 kg
machine ready
without castors
packaging and delivery preparation optional

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

terms of delivery: ex-warehouse aalen

our general terms and conditions apply, see in the 
 NO. 04043 MOBILE EXTRACTION SYSTEM/CLEAN AIR DEVICE CORAL PRVN USED, VERY GOOD CONDITION VACUUM SYSTEM, VERY STRONG SUCTION POWER 400 V / 2,2 KW ABB ENGINE 2 NEW FILTER CARTRIDGES MANUAL CLEANING 2 SHAVING CONTAINER 40 CM DIAMETER X 80 CM HEIGHT EXTRACTION ADAPTER 140 MM TRANSPORT DIMENSIONS: 1200 X 1000 X 2350 MM, APPROX. 250 KG MACHINE READY WITHOUT CASTORS PACKAGING AND DELIVERY PREPARATION OPTIONAL USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE TERMS OF DELIVERY: EX-WAREHOUSE AALEN OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 680 kg<br/>dimensions (l x w x h) approx.: 1400 x 1600 x 1500 mm<br/>description: industrial robot with control cabinet and teach-in tablet. WEIGHT APPROX.: 680 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1600 X 1500 MM
DESCRIPTION: INDUSTRIAL ROBOT WITH CONTROL CABINET AND TEACH-IN TABLET.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-for sale:

2 x transformers of 3150kva
primary voltage 10kv
secondary voltage 400/690volt FOR SALE: 2 X TRANSFORMERS OF 3150KVA PRIMARY VOLTAGE 10KV SECONDARY VOLTAGE 400/690VOLT
Vendedor: GPE Global Power Engineer
Año de construcción: usado
Ubicación: Land-weight approx.: 2100 kg<br/>dimensions (l x w x h) approx.: 2200 x 2000 x 2100 mm<br/>description: industrial robot with control cabinet and teach-in tablet. WEIGHT APPROX.: 2100 KG
DIMENSIONS (L X W X H) APPROX.: 2200 X 2000 X 2100 MM
DESCRIPTION: INDUSTRIAL ROBOT WITH CONTROL CABINET AND TEACH-IN TABLET.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mobile extraction system/clean air device coral prvn

used, very good condition
vacuum system, very strong suction power
400 v / 2,2 kw abb engine
2 new filter cartridges
manual cleaning
2 shaving container 40 cm diameter x 80 cm height
extraction adapter 140 mm
transport dimensions: 1200 x 1000 x 2350 mm, approx. 250 kg
machine ready
without castors
packaging and delivery preparation optional

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

terms of delivery: ex-warehouse aalen

our general terms and conditions apply, see in the  MOBILE EXTRACTION SYSTEM/CLEAN AIR DEVICE CORAL PRVN USED, VERY GOOD CONDITION VACUUM SYSTEM, VERY STRONG SUCTION POWER 400 V / 2,2 KW ABB ENGINE 2 NEW FILTER CARTRIDGES MANUAL CLEANING 2 SHAVING CONTAINER 40 CM DIAMETER X 80 CM HEIGHT EXTRACTION ADAPTER 140 MM TRANSPORT DIMENSIONS: 1200 X 1000 X 2350 MM, APPROX. 250 KG MACHINE READY WITHOUT CASTORS PACKAGING AND DELIVERY PREPARATION OPTIONAL USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE TERMS OF DELIVERY: EX-WAREHOUSE AALEN OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 680 kg<br/>dimensions (l x w x h) approx.: 1400 x 1600 x 1600 mm<br/>description: industrial robot with control cabinet and teach-in tablet. WEIGHT APPROX.: 680 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1600 X 1600 MM
DESCRIPTION: INDUSTRIAL ROBOT WITH CONTROL CABINET AND TEACH-IN TABLET.
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)