2236 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-demag crane 3.2 t with radio remote control and scale
manufacturer: demag cranes & components gmbh
year of construction: 1992
capacity: 3.2 t
span crane: 16300 mm
number d. wheels crane: 4 pcs.
number d. wheels cat: 4 pcs.
operation mode: radio control
additional equipment: built-in scale

DEMAG CRANE 3.2 T WITH RADIO REMOTE CONTROL AND SCALE MANUFACTURER: DEMAG CRANES & COMPONENTS GMBH YEAR OF CONSTRUCTION: 1992 CAPACITY: 3.2 T SPAN CRANE: 16300 MM NUMBER D. WHEELS CRANE: 4 PCS. NUMBER D. WHEELS CAT: 4 PCS. OPERATION MODE: RADIO CONTROL ADDITIONAL EQUIPMENT: BUILT-IN SCALE
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Precio: 34.500 EU€
Ubicación: Land-plasma cutter ajan shp 260a is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. with these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. condition of the equipment good. PLASMA CUTTER AJAN SHP 260A IS A NUMERICALLY CONTROLLED OXYGEN SHEET CUTTING DEVICE, USING ORIGINAL CUTTING TOOLS MOUNTED ON IT, AND CAN BE GAS AND PLASMA TOOLS. WITH THESE TOOLS YOU CAN MAKE STRAIGHT CUTS AND LINEAR CUTS, ACCORDING TO PROGRAMMED CUTTING PROGRAMS OR BY MANUALLY CONTROLLING THE CUTTING PATH. CONDITION OF THE EQUIPMENT GOOD.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-vibrating sieves to the screening of different granule fractions.

containers with conical or on wheels.

simple, low-cost maintenance.

easy to clean.

quick replacing of the filter network.

engine 2-4 pole.

power discharge tamping system on request.

designed for continuous operation. VIBRATING SIEVES TO THE SCREENING OF DIFFERENT GRANULE FRACTIONS. CONTAINERS WITH CONICAL OR ON WHEELS. SIMPLE, LOW-COST MAINTENANCE. EASY TO CLEAN. QUICK REPLACING OF THE FILTER NETWORK. ENGINE 2-4 POLE. POWER DISCHARGE TAMPING SYSTEM ON REQUEST. DESIGNED FOR CONTINUOUS OPERATION.
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-ge digital energy sg series ce, ups system including 30x batteries, s1060-4208-b030a, , 870x650x1900mm, 900x800x1800mm; accessories: ge digital energy sg series ce, ups system including 30x batteries, s1060-4208-b030a, , 870x650x1900mm, 900x800x1800mm GE DIGITAL ENERGY SG SERIES CE, UPS SYSTEM INCLUDING 30X BATTERIES, S1060-4208-B030A, , 870X650X1900MM, 900X800X1800MM; ACCESSORIES: GE DIGITAL ENERGY SG SERIES CE, UPS SYSTEM INCLUDING 30X BATTERIES, S1060-4208-B030A, , 870X650X1900MM, 900X800X1800MM
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-2 x cutting mill alpine augsburg: rotor dimensions: 40 x 100 mm open rotor, 5 rotor blade & 3 stator, drive 45 kw. 

1 x cutting mill alpine augsburg: rotor dimensions: 40 x 63 mm open rotor, 5 rotor blade & 3 stator, drive 30 kw.

1 x cutting mill condux: rotor dimensions: 45 x 60 mm open rotor, 3 rotor blade & 2 statormesser bevel cut, drive 30 kw.

1 x ver recorded fine impact mill alpine augsburg upz 400: drive 37 kw 1 x zig-zag separator alpine augsburg: fan 8.5 kw 2 X CUTTING MILL ALPINE AUGSBURG: ROTOR DIMENSIONS: 40 X 100 MM OPEN ROTOR, 5 ROTOR BLADE & 3 STATOR, DRIVE 45 KW. 1 X CUTTING MILL ALPINE AUGSBURG: ROTOR DIMENSIONS: 40 X 63 MM OPEN ROTOR, 5 ROTOR BLADE & 3 STATOR, DRIVE 30 KW. 1 X CUTTING MILL CONDUX: ROTOR DIMENSIONS: 45 X 60 MM OPEN ROTOR, 3 ROTOR BLADE & 2 STATORMESSER BEVEL CUT, DRIVE 30 KW. 1 X VER RECORDED FINE IMPACT MILL ALPINE AUGSBURG UPZ 400: DRIVE 37 KW 1 X ZIG-ZAG SEPARATOR ALPINE AUGSBURG: FAN 8.5 KW
Vendedor: Herr Karl Neigert
Año de construcción: usado
Precio: 2.750 €
Ubicación: Land-; gross weight [kg]: 510; engine: yanmar yeg160ptls-5r; accessories: control panel, stahldach ; GROSS WEIGHT [KG]: 510; ENGINE: YANMAR YEG160PTLS-5R; ACCESSORIES: CONTROL PANEL, STAHLDACH
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-x-travel: 440mm, y-travel: 695mm, z-travel: 390mm, measuring probe: tesastar-i, acceleration: 1730mm/s², rapid traverse: 350mm/s, compressed air supply: 4bar, compressed air consumption: 21l/min, software: pc-dmis pro, operating system: windows xp, length: 1160mm, width: 1280mm, height: 2320mm, weight: 395kg, including probe set, computer and 17 inch lcd screen.  X-TRAVEL: 440MM, Y-TRAVEL: 695MM, Z-TRAVEL: 390MM, MEASURING PROBE: TESASTAR-I, ACCELERATION: 1730MM/S², RAPID TRAVERSE: 350MM/S, COMPRESSED AIR SUPPLY: 4BAR, COMPRESSED AIR CONSUMPTION: 21L/MIN, SOFTWARE: PC-DMIS PRO, OPERATING SYSTEM: WINDOWS XP, LENGTH: 1160MM, WIDTH: 1280MM, HEIGHT: 2320MM, WEIGHT: 395KG, INCLUDING PROBE SET, COMPUTER AND 17 INCH LCD SCREEN.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 8.750 €
Ubicación: Land-; gross weight [kg]: 2000; engine: iveco nef60te2; accessories: tanker, battery, control panel ; GROSS WEIGHT [KG]: 2000; ENGINE: IVECO NEF60TE2; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-mafac spritz - flood - washer mod. sf 60-40 / bj. 95 / filling quantity 305 l / 6 bar / temperature 60â° / 15 kw / 600 mâ³ h. / up 280 l-min. / good condition
fe.gi.maschinen.sbg.at

mafac spray - flood - cleaning system model sf 60-40 / year 95 / capacity 305 l / 6 bar / temperature 60â° / 15 kw / 600 mâ³ h. / up to 280 l-min. / good condition
fe.gi.maschinen.sbg.at MAFAC SPRITZ - FLOOD - WASHER MOD. SF 60-40 / BJ. 95 / FILLING QUANTITY 305 L / 6 BAR / TEMPERATURE 60° / 15 KW / 600 M³ H. / UP 280 L-MIN. / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT MAFAC SPRAY - FLOOD - CLEANING SYSTEM MODEL SF 60-40 / YEAR 95 / CAPACITY 305 L / 6 BAR / TEMPERATURE 60° / 15 KW / 600 M³ H. / UP TO 280 L-MIN. / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Precio: 9.500 €
Ubicación: Land-; gross weight [kg]: 2250; engine: iveco 8361 sri; accessories: tanker, control panel, ex stand-by generator set ; GROSS WEIGHT [KG]: 2250; ENGINE: IVECO 8361 SRI; ACCESSORIES: TANKER, CONTROL PANEL, EX STAND-BY GENERATOR SET
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land--the welded frame in mono-block design ensures a good stiffness and high accuracy of the machine
-roller guide with 3-point support and an imported ad of with a handwheel adjustable cutting cone
-the simplified setting of the cutting gap by moving blade carrier and mono-block knife leads to an improvement of the quality
-since the machine with a synchronous control system with cylinders connected in series, you get a very uniform gravity. it's very simple. the cutting angle by controlling the flow to the cylinders connected in series on the different cutting thicknesses set
-a backgauge with drive and display facilitates the setting
using a lamp to indicate the cutting line, the customer can perform a shadow line cut
-the hold-down devices guarantee a reliable cutting
-infinitely variable adjustment of the cutting stroke

technical data
-maximum cutting thickness: 6 mm
-maximum cutting width: 3100 mm
-cutting gap: 0.05 - 0.60 mm
-cutting angle: 0.5-3 â°
-speed: 13-45 rpm
-maximum piston stroke: 210 mm
-maximum cutting power: 145 kn
-max down holder force: 150 kn
-maximum working pressure: 18 mpa
-rear velocity range: 10-750 mm
-oil pump / flow rate: 25 ml / r
-engine power: 7,5 kw
-motor speed: 1470 u/min
-dimensions wxhxd: 4045 x 1750 x 3770 mm
-weight: 5500 kg -THE WELDED FRAME IN MONO-BLOCK DESIGN ENSURES A GOOD STIFFNESS AND HIGH ACCURACY OF THE MACHINE -ROLLER GUIDE WITH 3-POINT SUPPORT AND AN IMPORTED AD OF WITH A HANDWHEEL ADJUSTABLE CUTTING CONE -THE SIMPLIFIED SETTING OF THE CUTTING GAP BY MOVING BLADE CARRIER AND MONO-BLOCK KNIFE LEADS TO AN IMPROVEMENT OF THE QUALITY -SINCE THE MACHINE WITH A SYNCHRONOUS CONTROL SYSTEM WITH CYLINDERS CONNECTED IN SERIES, YOU GET A VERY UNIFORM GRAVITY. IT'S VERY SIMPLE. THE CUTTING ANGLE BY CONTROLLING THE FLOW TO THE CYLINDERS CONNECTED IN SERIES ON THE DIFFERENT CUTTING THICKNESSES SET -A BACKGAUGE WITH DRIVE AND DISPLAY FACILITATES THE SETTING USING A LAMP TO INDICATE THE CUTTING LINE, THE CUSTOMER CAN PERFORM A SHADOW LINE CUT -THE HOLD-DOWN DEVICES GUARANTEE A RELIABLE CUTTING -INFINITELY VARIABLE ADJUSTMENT OF THE CUTTING STROKE TECHNICAL DATA -MAXIMUM CUTTING THICKNESS: 6 MM -MAXIMUM CUTTING WIDTH: 3100 MM -CUTTING GAP: 0.05 - 0.60 MM -CUTTING ANGLE: 0.5-3 ° -SPEED: 13-45 RPM -MAXIMUM PISTON STROKE: 210 MM -MAXIMUM CUTTING POWER: 145 KN -MAX DOWN HOLDER FORCE: 150 KN -MAXIMUM WORKING PRESSURE: 18 MPA -REAR VELOCITY RANGE: 10-750 MM -OIL PUMP / FLOW RATE: 25 ML / R -ENGINE POWER: 7,5 KW -MOTOR SPEED: 1470 U/MIN -DIMENSIONS WXHXD: 4045 X 1750 X 3770 MM -WEIGHT: 5500 KG
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Precio: 5.250 €
Ubicación: Land-; gross weight [kg]: 8750; engine: detroit diesel 16vf003550; accessories: control panel ; GROSS WEIGHT [KG]: 8750; ENGINE: DETROIT DIESEL 16VF003550; ACCESSORIES: CONTROL PANEL
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-turning-milling center

suitable machine for medium and large series

manufacturer: dmg gildemeister type: msl 42/7
year of build: 2009 control: fanuc
chuck diameter: collet chuck spindle passage: 42 mm speed range from - to: 4000-5000 u/min

facilities
axes: 7 driven tools: yes hollow clamping device: yes chip conveyor: yes
	
accessories:

bar feeder
tool

spindle hours: 29.531
power-on hours: 35.903

good condition!

only brass processing.

video available.

delivery time approx. mid april 2019

errors excepted.

TURNING-MILLING CENTER SUITABLE MACHINE FOR MEDIUM AND LARGE SERIES MANUFACTURER: DMG GILDEMEISTER TYPE: MSL 42/7 YEAR OF BUILD: 2009 CONTROL: FANUC CHUCK DIAMETER: COLLET CHUCK SPINDLE PASSAGE: 42 MM SPEED RANGE FROM - TO: 4000-5000 U/MIN FACILITIES AXES: 7 DRIVEN TOOLS: YES HOLLOW CLAMPING DEVICE: YES CHIP CONVEYOR: YES ACCESSORIES: BAR FEEDER TOOL SPINDLE HOURS: 29.531 POWER-ON HOURS: 35.903 GOOD CONDITION! ONLY BRASS PROCESSING. VIDEO AVAILABLE. DELIVERY TIME APPROX. MID APRIL 2019 ERRORS EXCEPTED.
Vendedor: Spantech GmbH
Año de construcción: usado
Precio: 4.900 €
Ubicación: Land-; gross weight [kg]: 4500; engine: deutz bf12l714; accessories: control panel ; GROSS WEIGHT [KG]: 4500; ENGINE: DEUTZ BF12L714; ACCESSORIES: CONTROL PANEL
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-used stainless steel process vessels

volume: 200 l
type: standing on wheels
material (media contact): v2a / aisi 304 stainless steel
number the fixations: 4 rolls
floor:-torispherical head
top shelf:-torispherical head removable
working pressure according to the nameplate: atm

dimensions tank:

inside diameter: 670mm
outside diameter: 690 mm
height of feet: 220mm
distance from drain to floor: 1 340 mm 2. 330 mm
total height: 1700 mm
total width: 1020 mm

materials:

inside: v2a / aisi304
exterior parts: 1.4301 / aisi304

facilities:

plate: no
outlet: bottom valve
various connectors
top shelf, removable
control box
propeller rã¼hraorgan available USED STAINLESS STEEL PROCESS VESSELS VOLUME: 200 L TYPE: STANDING ON WHEELS MATERIAL (MEDIA CONTACT): V2A / AISI 304 STAINLESS STEEL NUMBER THE FIXATIONS: 4 ROLLS FLOOR:-TORISPHERICAL HEAD TOP SHELF:-TORISPHERICAL HEAD REMOVABLE WORKING PRESSURE ACCORDING TO THE NAMEPLATE: ATM DIMENSIONS TANK: INSIDE DIAMETER: 670MM OUTSIDE DIAMETER: 690 MM HEIGHT OF FEET: 220MM DISTANCE FROM DRAIN TO FLOOR: 1 340 MM 2. 330 MM TOTAL HEIGHT: 1700 MM TOTAL WIDTH: 1020 MM MATERIALS: INSIDE: V2A / AISI304 EXTERIOR PARTS: 1.4301 / AISI304 FACILITIES: PLATE: NO OUTLET: BOTTOM VALVE VARIOUS CONNECTORS TOP SHELF, REMOVABLE CONTROL BOX PROPELLER RüHRAORGAN AVAILABLE
Vendedor: Inox Behälter GmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-ge digital energy sg series ce, ups system including 30x batteries, s1060-4208-b030a, , 870x650x1900mm, 900x800x1800mm GE DIGITAL ENERGY SG SERIES CE, UPS SYSTEM INCLUDING 30X BATTERIES, S1060-4208-B030A, , 870X650X1900MM, 900X800X1800MM
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-spare parts for mammography equipment make: ge type: dmr
model number: zfhoodmr type: 2102284

we have many working parts.
ask for the individual parts.

you will receive a quick reply with quotation. SPARE PARTS FOR MAMMOGRAPHY EQUIPMENT MAKE: GE TYPE: DMR MODEL NUMBER: ZFHOODMR TYPE: 2102284 WE HAVE MANY WORKING PARTS. ASK FOR THE INDIVIDUAL PARTS. YOU WILL RECEIVE A QUICK REPLY WITH QUOTATION.
Vendedor: Wilbert Medizintechnik
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-; power [ps]: 475; gross weight [kg]: 18000; engine: iveco; accessories: generator 500kva with hot water boiler, , mhkw systems., , manufacturer engine: iveco, typ engine: mtd, cnm, 350, manufacturer generator: avk, typ generator: dsg52m1.4, year: 1994, fuel: diesel, serial number engine: 000173, serial number generator: 66162 ; POWER [PS]: 475; GROSS WEIGHT [KG]: 18000; ENGINE: IVECO; ACCESSORIES: GENERATOR 500KVA WITH HOT WATER BOILER, , MHKW SYSTEMS., , MANUFACTURER ENGINE: IVECO, TYP ENGINE: MTD, CNM, 350, MANUFACTURER GENERATOR: AVK, TYP GENERATOR: DSG52M1.4, YEAR: 1994, FUEL: DIESEL, SERIAL NUMBER ENGINE: 000173, SERIAL NUMBER GENERATOR: 66162
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-cnc lathe
mazak qt nexus 100-ii ms
built 10/2009
mazatrol matrix control
maximum turning diameter 280 mm
max swing diameter 550 mm
traverse paths x/z/w 185 mm / 455 mm / 460 mm
rapid traverse x/z/w 30/33/30 m / min
main spindle ac 11/7,5 kw
main spindle a2-5 spindle nose
maximum main spindle spindle speed 6,000 rpm
counter spindle a.c.11 kw (25% ed)
maximum spindle speed spindle 6,000 rpm
12 station tool turret
12-driven tool stations 5.5 kw
maximum speed-driven tools 4,500 rpm
chip conveyor
coolant pump
with full c-axis counter spindle
air blower counter spindle
automatic door
interface for robot
1 x 3 - jaw chuck kitagawa b-206
1 x 3 - jaw chuck kitagawa b-205
tool holder package, including 3 driven tool holder
ce mark
 CNC LATHE MAZAK QT NEXUS 100-II MS BUILT 10/2009 MAZATROL MATRIX CONTROL MAXIMUM TURNING DIAMETER 280 MM MAX SWING DIAMETER 550 MM TRAVERSE PATHS X/Z/W 185 MM / 455 MM / 460 MM RAPID TRAVERSE X/Z/W 30/33/30 M / MIN MAIN SPINDLE AC 11/7,5 KW MAIN SPINDLE A2-5 SPINDLE NOSE MAXIMUM MAIN SPINDLE SPINDLE SPEED 6,000 RPM COUNTER SPINDLE A.C.11 KW (25% ED) MAXIMUM SPINDLE SPEED SPINDLE 6,000 RPM 12 STATION TOOL TURRET 12-DRIVEN TOOL STATIONS 5.5 KW MAXIMUM SPEED-DRIVEN TOOLS 4,500 RPM CHIP CONVEYOR COOLANT PUMP WITH FULL C-AXIS COUNTER SPINDLE AIR BLOWER COUNTER SPINDLE AUTOMATIC DOOR INTERFACE FOR ROBOT 1 X 3 - JAW CHUCK KITAGAWA B-206 1 X 3 - JAW CHUCK KITAGAWA B-205 TOOL HOLDER PACKAGE, INCLUDING 3 DRIVEN TOOL HOLDER CE MARK
Vendedor: TÖRNER CNC Maschinen
Año de construcción: usado
Ubicación: Land-degree:  <br/>working heigth:  mm<br/>length:  mm<br/>heat shrink system<br/><br/><br/><br/><br/> DEGREE:
WORKING HEIGTH: MM
LENGTH: MM
HEAT SHRINK SYSTEM




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-control system: maho 432 t	
travel distances:	
x: 250 mm	
z : 620 mm	
speed range: 20-5000 rpm	
toolholder: vdi 30	
turret 12 positions (positions for live tools)	
accessories:	
bar loader hydrobar	
tool probe	
tailstock	
chip conveyor	
manuals	
 CONTROL SYSTEM: MAHO 432 T TRAVEL DISTANCES: X: 250 MM Z : 620 MM SPEED RANGE: 20-5000 RPM TOOLHOLDER: VDI 30 TURRET 12 POSITIONS (POSITIONS FOR LIVE TOOLS) ACCESSORIES: BAR LOADER HYDROBAR TOOL PROBE TAILSTOCK CHIP CONVEYOR MANUALS
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-length:  mm<br/>width:  mm<br/>height over floor:  mm<br/>conveyor belt system for finishing line<br/><br/><br/><br/><br/> LENGTH: MM
WIDTH: MM
HEIGHT OVER FLOOR: MM
CONVEYOR BELT SYSTEM FOR FINISHING LINE




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-control system:	
heidenhain	
travels distances:	
x: 500 mm	
y: 500 mm	
z: 500 mm	
feed: x.y.z: 25 m / min	
spindle speed: 20-8000 rpm	
machine weight: 3800 kg	
  CONTROL SYSTEM: HEIDENHAIN TRAVELS DISTANCES: X: 500 MM Y: 500 MM Z: 500 MM FEED: X.Y.Z: 25 M / MIN SPINDLE SPEED: 20-8000 RPM MACHINE WEIGHT: 3800 KG
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-degree:  <br/>working heigth:  mm<br/>length:  mm<br/>heat shrink system<br/><br/><br/><br/><br/> DEGREE:
WORKING HEIGTH: MM
LENGTH: MM
HEAT SHRINK SYSTEM




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-5-axis machining center-
fehlmann picomax 825 with erowa pallet automation

control: heidenhein itnc530
year of construction: 2010

procedures/swing areas:
x-axis: 820mm
y-axis: 700mm
z-axis: 450mm
a-axis: 230â° (view compactset 115 â° +/-)
c-axis: 360â° (round table)

rapid traverse:
30 000 mm (linear axes)

spindle speed range: 50-20,000 1/min
interface: hsk63
power: 24kw
torque: 120nm

tool changer:
80 positions (pickup)

facilities: erowa robot easy automation with 10 pallets for workpieces up to 310 x 310 x 300 mm 80 bar ikz 1050 l coolant tank (coolant pressure above m features adjustable)

renishaw omp 40-2 probe

laser tool measurement for d0, 3-80 mm

direct path measurement systems for all axes (xyzac)

actively cooled shaft drives in all axes (xyzac)
actively cooled y carriage

automatic length compensation of main spindle via direct measuring system

5achsen-simultan and spline interpolsation (polynomials 3.grades)

round table with torque drive 5-AXIS MACHINING CENTER- FEHLMANN PICOMAX 825 WITH EROWA PALLET AUTOMATION CONTROL: HEIDENHEIN ITNC530 YEAR OF CONSTRUCTION: 2010 PROCEDURES/SWING AREAS: X-AXIS: 820MM Y-AXIS: 700MM Z-AXIS: 450MM A-AXIS: 230&ACIRC;&DEG; (VIEW COMPACTSET 115 &ACIRC;&DEG; +/-) C-AXIS: 360&ACIRC;&DEG; (ROUND TABLE) RAPID TRAVERSE: 30 000 MM (LINEAR AXES) SPINDLE SPEED RANGE: 50-20,000 1/MIN INTERFACE: HSK63 POWER: 24KW TORQUE: 120NM TOOL CHANGER: 80 POSITIONS (PICKUP) FACILITIES: EROWA ROBOT EASY AUTOMATION WITH 10 PALLETS FOR WORKPIECES UP TO 310 X 310 X 300 MM 80 BAR IKZ 1050 L COOLANT TANK (COOLANT PRESSURE ABOVE M FEATURES ADJUSTABLE) RENISHAW OMP 40-2 PROBE LASER TOOL MEASUREMENT FOR D0, 3-80 MM DIRECT PATH MEASUREMENT SYSTEMS FOR ALL AXES (XYZAC) ACTIVELY COOLED SHAFT DRIVES IN ALL AXES (XYZAC) ACTIVELY COOLED Y CARRIAGE AUTOMATIC LENGTH COMPENSATION OF MAIN SPINDLE VIA DIRECT MEASURING SYSTEM 5ACHSEN-SIMULTAN AND SPLINE INTERPOLSATION (POLYNOMIALS 3.GRADES) ROUND TABLE WITH TORQUE DRIVE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 30 mm<br/>turning length: 270 mm<br/>control: tx 8f <br/>main spindle::  <br/>spindle hollow: 30 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - main spindel: 7,5 / 11 kw<br/>max. torque: 105 nm<br/>spindle bearing diameter: 65 mm<br/>c - axis: 360 °<br/>subspindel::  <br/>spindle hollow: 26 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - sub spindle: 3,7 / 5,5 kw<br/>max. torque: 35 nm<br/>traverses subspindle: 330 mm<br/>c - axis: 360 °<br/>tool mount::  <br/>number of turret: 2 <br/>no. of tool upper turret: 12 pos<br/>y - axis: +/- 18 mm<br/>tool positions lower turret: 12 pos<br/>shank diameter: 25 mm<br/>shaft length: 48 mm<br/>cross cut: 16 x 16 mm<br/>change-time chip to chip: ca. 1,2 sec<br/>driven tools::  <br/>number of driven toolspositions: 2 x 12 pos<br/>power capacity - driven tools: 2,6 kw<br/>spindle speed - driven tools: max. 8.000 min -1<br/>max. torque: 4,0 nm<br/>feeds::  <br/>rapid traverse: x:  12 m/min<br/>rapid traverse: z:  15 m/min<br/>rapid traverse: y:  7,5 m/min<br/>feed force: x/z:  3 kn<br/>feed force: y:  5 kn<br/>rapid traverse sub spindle: 24 m/min<br/>feeding force subsindle: 3 kn<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 3,6 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 1,9 m<br/>documents:  <br/>bar feeder:  <br/>parts catcher:  <br/>coolantsystem:  <br/>signal-light:  <br/>chip conveyor:  <br/>cnc-turning- and milling center<br/>traub - tnc 30 dgy<br/><br/>- incl. bar feeder traub stamag dn 26 <br/><br/><br/><br/><br/> TURNING DIAMETER: 30 MM
TURNING LENGTH: 270 MM
CONTROL: TX 8F
MAIN SPINDLE::
SPINDLE HOLLOW: 30 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 7,5 / 11 KW
MAX. TORQUE: 105 NM
SPINDLE BEARING DIAMETER: 65 MM
C - AXIS: 360 °
SUBSPINDEL::
SPINDLE HOLLOW: 26 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 3,7 / 5,5 KW
MAX. TORQUE: 35 NM
TRAVERSES SUBSPINDLE: 330 MM
C - AXIS: 360 °
TOOL MOUNT::
NUMBER OF TURRET: 2
NO. OF TOOL UPPER TURRET: 12 POS
Y - AXIS: +/- 18 MM
TOOL POSITIONS LOWER TURRET: 12 POS
SHANK DIAMETER: 25 MM
SHAFT LENGTH: 48 MM
CROSS CUT: 16 X 16 MM
CHANGE-TIME CHIP TO CHIP: CA. 1,2 SEC
DRIVEN TOOLS::
NUMBER OF DRIVEN TOOLSPOSITIONS: 2 X 12 POS
POWER CAPACITY - DRIVEN TOOLS: 2,6 KW
SPINDLE SPEED - DRIVEN TOOLS: MAX. 8.000 MIN -1
MAX. TORQUE: 4,0 NM
FEEDS::
RAPID TRAVERSE: X: 12 M/MIN
RAPID TRAVERSE: Z: 15 M/MIN
RAPID TRAVERSE: Y: 7,5 M/MIN
FEED FORCE: X/Z: 3 KN
FEED FORCE: Y: 5 KN
RAPID TRAVERSE SUB SPINDLE: 24 M/MIN
FEEDING FORCE SUBSINDLE: 3 KN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 3,6 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 1,9 M
DOCUMENTS:
BAR FEEDER:
PARTS CATCHER:
COOLANTSYSTEM:
SIGNAL-LIGHT:
CHIP CONVEYOR:
CNC-TURNING- AND MILLING CENTER
TRAUB - TNC 30 DGY

- INCL. BAR FEEDER TRAUB STAMAG DN 26




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 370 €
Ubicación: Land-table belt sander

grinding table 1800 x 850 mm
total size: length 3200 mm, width 1200 mm, height 1700 mm
weight 690 kg
built in 1972

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 

 TABLE BELT SANDER GRINDING TABLE 1800 X 850 MM TOTAL SIZE: LENGTH 3200 MM, WIDTH 1200 MM, HEIGHT 1700 MM WEIGHT 690 KG BUILT IN 1972 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-max. machining diameter: 12,7 mm<br/>max. machining length: 130 mm<br/>control: tx 8i <br/>main spindle::  <br/>turning speed range - main spindle: 0 - 12.000 min/-1<br/>power capacity - main spindel: 4,0 / 2,5 kw<br/>max. torque: 7 nm<br/>spindle bearing diameter: 35 mm<br/>max. bar capacity: 12,7 mm<br/>c-axis: 0,001 °<br/>subspindle::  <br/>spindle speed range subspindle: 0 - 12.000 min/-1<br/>power capacity - sub spindle: 4,0 / 2,5 kw<br/>max. torque: 7 nm<br/>c-axis: 0,001 °<br/>turret::  <br/>number of toolpositions: 6 pos.<br/>shank diameter: 12 x 12 mm<br/>number of driven toolspositions: 6 pos.<br/>spindle speed - driven tool stations: 0 - 8.000 min -1<br/>power capacity driven tool-stations: 1,5 / 0,9 kw<br/>max. torque: 2,4 nm<br/>turret 2::  <br/>number of toolpositions: 6 pos.<br/>shank diameter: 12 x 12 mm<br/>number of driven toolspositions: 6 pos.<br/>spindle speed - driven tool stations: 0 - 8.000 min -1<br/>power capacity driven tool-stations: 1,5 / 0,9 kw<br/>max. torque: 2,4 nm<br/>backside processing::  <br/>number of fixed tools: 3 pos<br/>shank diameter: 20 mm<br/>number of driven toolspositions: 4 pos.<br/>shank diameter: 28 mm<br/>axis stroke::  <br/>x-axis: 1/2: 35 / 4: 39 mm<br/>y-axis: 37,5 (-9,5/+28) mm<br/>z-axis: 2: 50 / 3: 80 mm<br/>feeds::  <br/>rapid traverse ( x / y / z ): 15 / 15 / 30 m/min<br/>rapid traverse: c: 0 - 100 1/min<br/>feed speeds: x: max. 7.500 mm/min<br/>feed speeds: y: max. 7.500 mm/min<br/>feed speeds: z: max. 10.000 mm/min<br/>total power requirement: 18 kw<br/>weight of the machine ca.: 2,0 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 2,3 m<br/>documents:  <br/>chip conveyor:  <br/>bar feeder: fmb minimag <br/>coolantsystem:  <br/>tool drive mechanisum:  <br/>cnc - bar automatic lathe<br/>traub - tnl 12/7<br/><br/>- incl. barfeeder fmb minimag<br/><br/><br/><br/><br/> MAX. MACHINING DIAMETER: 12,7 MM
MAX. MACHINING LENGTH: 130 MM
CONTROL: TX 8I
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 0 - 12.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 4,0 / 2,5 KW
MAX. TORQUE: 7 NM
SPINDLE BEARING DIAMETER: 35 MM
MAX. BAR CAPACITY: 12,7 MM
C-AXIS: 0,001 °
SUBSPINDLE::
SPINDLE SPEED RANGE SUBSPINDLE: 0 - 12.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 4,0 / 2,5 KW
MAX. TORQUE: 7 NM
C-AXIS: 0,001 °
TURRET::
NUMBER OF TOOLPOSITIONS: 6 POS.
SHANK DIAMETER: 12 X 12 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: 0 - 8.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 0,9 KW
MAX. TORQUE: 2,4 NM
TURRET 2::
NUMBER OF TOOLPOSITIONS: 6 POS.
SHANK DIAMETER: 12 X 12 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: 0 - 8.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 0,9 KW
MAX. TORQUE: 2,4 NM
BACKSIDE PROCESSING::
NUMBER OF FIXED TOOLS: 3 POS
SHANK DIAMETER: 20 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 4 POS.
SHANK DIAMETER: 28 MM
AXIS STROKE::
X-AXIS: 1/2: 35 / 4: 39 MM
Y-AXIS: 37,5 (-9,5/+28) MM
Z-AXIS: 2: 50 / 3: 80 MM
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 15 / 15 / 30 M/MIN
RAPID TRAVERSE: C: 0 - 100 1/MIN
FEED SPEEDS: X: MAX. 7.500 MM/MIN
FEED SPEEDS: Y: MAX. 7.500 MM/MIN
FEED SPEEDS: Z: MAX. 10.000 MM/MIN
TOTAL POWER REQUIREMENT: 18 KW
WEIGHT OF THE MACHINE CA.: 2,0 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 2,3 M
DOCUMENTS:
CHIP CONVEYOR:
BAR FEEDER: FMB MINIMAG
COOLANTSYSTEM:
TOOL DRIVE MECHANISUM:
CNC - BAR AUTOMATIC LATHE
TRAUB - TNL 12/7

- INCL. BARFEEDER FMB MINIMAG




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 1.690 €
Ubicación: Land-planer - thicknesser leya rauschenbach comb.

planing width 500 mm
combined machine also as saws or fillet/milling machine can be used
with feed
l x w x h: 1750 x 1050 x 1700 mm
weight approx. 1200 kg
built in 1959

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 

 PLANER - THICKNESSER LEYA RAUSCHENBACH COMB. PLANING WIDTH 500 MM COMBINED MACHINE ALSO AS SAWS OR FILLET/MILLING MACHINE CAN BE USED WITH FEED L X W X H: 1750 X 1050 X 1700 MM WEIGHT APPROX. 1200 KG BUILT IN 1959 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 30 mm<br/>turning length: 270 mm<br/>control: tx 8f <br/>main spindle::  <br/>spindle hollow: 30 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - main spindel: 7,5 / 11 kw<br/>max. torque: 105 nm<br/>spindle bearing diameter: 65 mm<br/>c - axis: 360 °<br/>subspindel::  <br/>spindle hollow: 26 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - sub spindle: 3,7 / 5,5 kw<br/>max. torque: 35 nm<br/>traverses subspindle: 330 mm<br/>c - axis: 360 °<br/>tool mount::  <br/>number of turret: 2 <br/>no. of tool upper turret: 12 pos<br/>y - axis: +/- 18 mm<br/>tool positions lower turret: 12 pos<br/>shank diameter: 25 mm<br/>shaft length: 48 mm<br/>cross cut: 16 x 16 mm<br/>change-time chip to chip: ca. 1,2 sec<br/>driven tools::  <br/>number of driven toolspositions: 2 x 12 pos<br/>power capacity - driven tools: 1,5 / 2,6 kw<br/>spindle speed - driven tools: max. 8.000 min -1<br/>max. torque: 4,0 nm<br/>feeds::  <br/>rapid traverse: x:  12 m/min<br/>rapid traverse: z:  15 m/min<br/>rapid traverse: y:  7,5 m/min<br/>feed force: x/z:  3 kn<br/>feed force: y:  5 kn<br/>rapid traverse sub spindle: 24 m/min<br/>feeding force subsindle: 3 kn<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 3,6 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 1,9 m<br/>documents:  <br/>bar feeder:  <br/>parts catcher:  <br/>coolantsystem:  <br/>signal-light:  <br/>chip conveyor:  <br/>cnc-turning- and milling center<br/>traub - tnc 30 dgy<br/><br/>- incl. bar feeder traub stamag dn 26 <br/><br/><br/><br/><br/> TURNING DIAMETER: 30 MM
TURNING LENGTH: 270 MM
CONTROL: TX 8F
MAIN SPINDLE::
SPINDLE HOLLOW: 30 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 7,5 / 11 KW
MAX. TORQUE: 105 NM
SPINDLE BEARING DIAMETER: 65 MM
C - AXIS: 360 °
SUBSPINDEL::
SPINDLE HOLLOW: 26 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 3,7 / 5,5 KW
MAX. TORQUE: 35 NM
TRAVERSES SUBSPINDLE: 330 MM
C - AXIS: 360 °
TOOL MOUNT::
NUMBER OF TURRET: 2
NO. OF TOOL UPPER TURRET: 12 POS
Y - AXIS: +/- 18 MM
TOOL POSITIONS LOWER TURRET: 12 POS
SHANK DIAMETER: 25 MM
SHAFT LENGTH: 48 MM
CROSS CUT: 16 X 16 MM
CHANGE-TIME CHIP TO CHIP: CA. 1,2 SEC
DRIVEN TOOLS::
NUMBER OF DRIVEN TOOLSPOSITIONS: 2 X 12 POS
POWER CAPACITY - DRIVEN TOOLS: 1,5 / 2,6 KW
SPINDLE SPEED - DRIVEN TOOLS: MAX. 8.000 MIN -1
MAX. TORQUE: 4,0 NM
FEEDS::
RAPID TRAVERSE: X: 12 M/MIN
RAPID TRAVERSE: Z: 15 M/MIN
RAPID TRAVERSE: Y: 7,5 M/MIN
FEED FORCE: X/Z: 3 KN
FEED FORCE: Y: 5 KN
RAPID TRAVERSE SUB SPINDLE: 24 M/MIN
FEEDING FORCE SUBSINDLE: 3 KN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 3,6 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 1,9 M
DOCUMENTS:
BAR FEEDER:
PARTS CATCHER:
COOLANTSYSTEM:
SIGNAL-LIGHT:
CHIP CONVEYOR:
CNC-TURNING- AND MILLING CENTER
TRAUB - TNC 30 DGY

- INCL. BAR FEEDER TRAUB STAMAG DN 26




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-it is a used control for koma sunriser for sale. the control unit is about 3 years old and functional.

price on request.  IT IS A USED CONTROL FOR KOMA SUNRISER FOR SALE. THE CONTROL UNIT IS ABOUT 3 YEARS OLD AND FUNCTIONAL. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-turning diameter: max. 260 mm<br/>turning length: 450 mm<br/>control: sinumerik siemens<br/>greates pass round over bed: 330 mm<br/>standard turning dia.: 200 mm<br/>main spindle::  <br/>max. rpm: 5.000 min/-1<br/>power capacity - main spindel: 11 / 16,5 kw<br/>max. torque: 166,5 nm<br/>spindle diameter in front bearing: 100 mm<br/>spindle bore: 68,5 mm<br/>max. bar capacity: 65 mm<br/>usable bar diameter: ( - ) mm<br/>max. chucking diameter: 210 mm<br/>spindle taper: 140h5 <br/>c-axis: 0,001 °<br/>axis stroke::  <br/>x-axis: 182,5 mm<br/>z-axis: 455 mm<br/>c-axis: 360 °<br/>turret::  <br/>number of toolpositions: 12 pos.<br/>number of driven toolspositions: 12 pos.<br/>tool taper: vdi 30 <br/>spindle speed - driven tool stations: max. 4.500 min -1<br/>power capacity - driven tool-stations: 8,4 kw<br/>max. torque: 20 nm<br/>tailstock::  <br/>tailstock adjustment: 396 mm<br/>tension force: 4 kn<br/>capture: mk 4 <br/>total power requirement: 21 kw<br/>weight of the machine ca.: 3,4 t<br/>dimensions of the machine ca.: 6,5 x 3,0 x 2,1 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>c-axis:  <br/>turret:  <br/>cnc-turning- and millingcenter<br/>dmg mori - ecoturn 310 v3<br/><br/>- only ca. 600h operating-hours<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 260 MM
TURNING LENGTH: 450 MM
CONTROL: SINUMERIK SIEMENS
GREATES PASS ROUND OVER BED: 330 MM
STANDARD TURNING DIA.: 200 MM
MAIN SPINDLE::
MAX. RPM: 5.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 11 / 16,5 KW
MAX. TORQUE: 166,5 NM
SPINDLE DIAMETER IN FRONT BEARING: 100 MM
SPINDLE BORE: 68,5 MM
MAX. BAR CAPACITY: 65 MM
USABLE BAR DIAMETER: ( - ) MM
MAX. CHUCKING DIAMETER: 210 MM
SPINDLE TAPER: 140H5
C-AXIS: 0,001 °
AXIS STROKE::
X-AXIS: 182,5 MM
Z-AXIS: 455 MM
C-AXIS: 360 °
TURRET::
NUMBER OF TOOLPOSITIONS: 12 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 12 POS.
TOOL TAPER: VDI 30
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 4.500 MIN -1
POWER CAPACITY - DRIVEN TOOL-STATIONS: 8,4 KW
MAX. TORQUE: 20 NM
TAILSTOCK::
TAILSTOCK ADJUSTMENT: 396 MM
TENSION FORCE: 4 KN
CAPTURE: MK 4
TOTAL POWER REQUIREMENT: 21 KW
WEIGHT OF THE MACHINE CA.: 3,4 T
DIMENSIONS OF THE MACHINE CA.: 6,5 X 3,0 X 2,1 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
C-AXIS:
TURRET:
CNC-TURNING- AND MILLINGCENTER
DMG MORI - ECOTURN 310 V3

- ONLY CA. 600H OPERATING-HOURS




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 620 €
Ubicación: Land-design and drilling machine series vitap length 1200 mm, width 900 mm, height 1600 mm
2 x 27 piece spindles
stop with 2 extensions for series hole
machine wheels
weight 450 kg
length mm, width 900 mm, height 1200 1600 mm
built in 1994

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 


 DESIGN AND DRILLING MACHINE SERIES VITAP LENGTH 1200 MM, WIDTH 900 MM, HEIGHT 1600 MM 2 X 27 PIECE SPINDLES STOP WITH 2 EXTENSIONS FOR SERIES HOLE MACHINE WHEELS WEIGHT 450 KG LENGTH MM, WIDTH 900 MM, HEIGHT 1200 1600 MM BUILT IN 1994 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 885 mm<br/>y-travel: 600 mm<br/>z-travel: 600 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>cnc control heidenhain itnc530<br/>nc swivel head (b-axis)<br/>nc-rotary table (c-axis)<br/>automatic tool changer for 30 tools<br/>coolant through spindle (ikz)<br/>measuring feeler<br/>chip conveyor<br/><br/>technische daten / technical details:<br/>x-weg / x-travel    885    mm<br/>y-weg / y-travel    600    mm<br/>z-weg / z-travel    600    mm<br/>b-achse / b-axis    -10 - +110    °<br/>c-achse / c-axis    360    °<br/>spindelaufnahme / spindle taper    hsk 63    <br/>drehzahlbereich spindel / spindle speed    0-18000    upm /rpm<br/>vorschub / infeed    90    m/min<br/>nc-rundtischdurchmesser / nc-rotary table diameter    750    mm<br/>antriebsleistung / drive capacity spindle     60    kw<br/>gewicht der maschine ca. / weight    12000    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 885 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 600 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CNC CONTROL HEIDENHAIN ITNC530
NC SWIVEL HEAD (B-AXIS)
NC-ROTARY TABLE (C-AXIS)
AUTOMATIC TOOL CHANGER FOR 30 TOOLS
COOLANT THROUGH SPINDLE (IKZ)
MEASURING FEELER
CHIP CONVEYOR

TECHNISCHE DATEN / TECHNICAL DETAILS:
X-WEG / X-TRAVEL 885 MM
Y-WEG / Y-TRAVEL 600 MM
Z-WEG / Z-TRAVEL 600 MM
B-ACHSE / B-AXIS -10 - +110 °
C-ACHSE / C-AXIS 360 °
SPINDELAUFNAHME / SPINDLE TAPER HSK 63
DREHZAHLBEREICH SPINDEL / SPINDLE SPEED 0-18000 UPM /RPM
VORSCHUB / INFEED 90 M/MIN
NC-RUNDTISCHDURCHMESSER / NC-ROTARY TABLE DIAMETER 750 MM
ANTRIEBSLEISTUNG / DRIVE CAPACITY SPINDLE 60 KW
GEWICHT DER MASCHINE CA. / WEIGHT 12000 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.






Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Precio: 1.890 €
Ubicación: Land-edge glue machine fravol rapid / r 4

to glue thickness max mm: 15 to glue height max mm: 65 thickness of rolling material max mm: 3 workpiece length min mm: 60 feed max m/min: 16 feed continuously variable: yes glue system granules: glue basin below caps saw unit: 2 motors flush/radius/chamfer stations: 2 strip magazine: yes a performing: legal machine ce mark: yes total connection kw: 12.70 weight ca. 1225 kg
length: 3200 mm, width 1000 mm, height 1700 mm
built in 1999

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 


 EDGE GLUE MACHINE FRAVOL RAPID / R 4 TO GLUE THICKNESS MAX MM: 15 TO GLUE HEIGHT MAX MM: 65 THICKNESS OF ROLLING MATERIAL MAX MM: 3 WORKPIECE LENGTH MIN MM: 60 FEED MAX M/MIN: 16 FEED CONTINUOUSLY VARIABLE: YES GLUE SYSTEM GRANULES: GLUE BASIN BELOW CAPS SAW UNIT: 2 MOTORS FLUSH/RADIUS/CHAMFER STATIONS: 2 STRIP MAGAZINE: YES A PERFORMING: LEGAL MACHINE CE MARK: YES TOTAL CONNECTION KW: 12.70 WEIGHT CA. 1225 KG LENGTH: 3200 MM, WIDTH 1000 MM, HEIGHT 1700 MM BUILT IN 1999 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-grinding length: 600 mm<br/>grinding width: 300 mm<br/>workpiece height: 510 mm<br/>grinding height: 510 mm<br/>table surface area: 1020 x 250 mm<br/>dist. center of grinding spindle - table: 625 mm<br/>grinding wheel size: 225 x 30 x 50,8 mm<br/>grinding spindle speed: 2900 u/min<br/>table adjustment - longitudinal: 720 mm<br/>table speeds: 3 - 30 m/min<br/>cross travel: 300 mm<br/>cross feed: 1 - 30 mm/impuls<br/>rapid traverse cross: 1,5 m/min<br/>fine adjustment: 0,002 mm<br/>vertical movement: 500 mm<br/>vertical feed autom.: 0,001 - 0,999 mm<br/>vertical rapid travel: 0,25 m/min<br/>control: siemens logo! td <br/>total power requirement: 7 kw<br/>weight of the machine ca.: 2,9 t<br/>dimensions: 2,48 x 1,85 x 2,12 m<br/>accessories: magnetic plate 600 x 250 mm, grinding wheel with flange,<br/>             various flanges separate, dro on y-axis (vertical),<br/>             wheel trueing attachment, wet grinding attachment<br/><br/><br/><br/><br/> GRINDING LENGTH: 600 MM
GRINDING WIDTH: 300 MM
WORKPIECE HEIGHT: 510 MM
GRINDING HEIGHT: 510 MM
TABLE SURFACE AREA: 1020 X 250 MM
DIST. CENTER OF GRINDING SPINDLE - TABLE: 625 MM
GRINDING WHEEL SIZE: 225 X 30 X 50,8 MM
GRINDING SPINDLE SPEED: 2900 U/MIN
TABLE ADJUSTMENT - LONGITUDINAL: 720 MM
TABLE SPEEDS: 3 - 30 M/MIN
CROSS TRAVEL: 300 MM
CROSS FEED: 1 - 30 MM/IMPULS
RAPID TRAVERSE CROSS: 1,5 M/MIN
FINE ADJUSTMENT: 0,002 MM
VERTICAL MOVEMENT: 500 MM
VERTICAL FEED AUTOM.: 0,001 - 0,999 MM
VERTICAL RAPID TRAVEL: 0,25 M/MIN
CONTROL: SIEMENS LOGO! TD
TOTAL POWER REQUIREMENT: 7 KW
WEIGHT OF THE MACHINE CA.: 2,9 T
DIMENSIONS: 2,48 X 1,85 X 2,12 M
ACCESSORIES: MAGNETIC PLATE 600 X 250 MM, GRINDING WHEEL WITH FLANGE,
VARIOUS FLANGES SEPARATE, DRO ON Y-AXIS (VERTICAL),
WHEEL TRUEING ATTACHMENT, WET GRINDING ATTACHMENT




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-ge lightspeed 16.slice ct scanner
manf. 04.2004 / modell-nr. 2378661
perfomix mx200/modell. 2120785-2 x.ray tube change 05.2016
total patient exams 18932
total tube mas ~112mio
gantry revolutions 4137036
application software: 07mw11.10_sp4-1-3.hp_p_m16_g_hpt
second console adv.4.2 incl. pc / monitor / keyboard etc.
no manuals / q-phantom / tune-up phantoms / software / cable etc.
more details on request / system is clean
gantry packed #special shock adsorber palette#
exw germany
greetings from franconia  GE LIGHTSPEED 16.SLICE CT SCANNER MANF. 04.2004 / MODELL-NR. 2378661 PERFOMIX MX200/MODELL. 2120785-2 X.RAY TUBE CHANGE 05.2016 TOTAL PATIENT EXAMS 18932 TOTAL TUBE MAS ~112MIO GANTRY REVOLUTIONS 4137036 APPLICATION SOFTWARE: 07MW11.10_SP4-1-3.HP_P_M16_G_HPT SECOND CONSOLE ADV.4.2 INCL. PC / MONITOR / KEYBOARD ETC. NO MANUALS / Q-PHANTOM / TUNE-UP PHANTOMS / SOFTWARE / CABLE ETC. MORE DETAILS ON REQUEST / SYSTEM IS CLEAN GANTRY PACKED #SPECIAL SHOCK ADSORBER PALETTE# EXW GERMANY GREETINGS FROM FRANCONIA
Vendedor: SanMedical GmbH
Año de construcción: usado
Ubicación: Land-grinding diameter: 350 mm<br/>grinding length: 9999999999999999999999999 mm<br/>centre height: 175 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>machine from medicine technic.<br/>fully maintained by studer.<br/><br/>delivery status in 2002:<br/><br/>werkstückspindelstock :<br/><br/>zum fliegendschleifen. wälzgelagert.<br/>rundheitsgenauigkeit bei auslieferung 0,0004mm.<br/>antrieb über ac-servomotor mit fanuc.<br/>spannmittelaufnahme camlock 6.<br/>integriertes pick-up zum aussen- und innenrundschleifen ab durchmesser 10mm<br/>sowie zum schulterschleifen ab 1mm schulterhöhe.<br/><br/>innenschleiftisch:<br/><br/>auf dem kreuzschlitten aufgebaut mit 4 werkzeugpositionen.<br/>davon eine aussenschleifvorrichtung.<br/>schwenkbewegung cnc-gesteuert, antrieb über ac-servomotor.<br/><br/>werkstücktisch:<br/><br/>inkl. luftabhebung und hydraulischer klemmung<br/>schwenkbereich +/- 30°<br/>winkeleinstellung über cnc-achse.<br/><br/>querachse x:<br/><br/>verfahrweg 120mm<br/>vorschubgeschwindigkeit 0,001-5.000 mm/min<br/><br/>längsachse z:<br/><br/>verfahrweg 500mm<br/>vorschubgeschwindigkeit 0,001-10.000 mm/min<br/><br/>cnc-steuerung fanuc 16gca:<br/><br/>-anwenderspeicher 60 (24kb) meter für werkstückprogramme, einricht- und<br/> scheibendaten<br/>- 200 programmspeicherplätze<br/>-integrierte sps-steuerung.<br/><br/>studer betriebssystem release a zu fanuc 16gca bestehend aus:<br/><br/>1. einrichtzyklen bedienergeführt<br/>2. bearbeitungszyklen für:<br/>    -durchmesserbearbeitung<br/>    -schulterbearbeitung<br/>    -konusbearbeitung<br/>    -freie konturen (x/z)<br/><br/>3.automatisches abrichten inkl. freie scheibenform<br/>4.einschaltuhrfunktion<br/>5.leerlaufzyklus zur erhalt der thermischen maschinenstabilität<br/>studer pcu-terminal (fanuc):<br/>-tragbares bediengerät mit lcd-anzeige, tastatur,elektronischem handrad,<br/>override und zustimmtaste.<br/><br/>schnittstelle rs232 c<br/>für daten-ein-und ausgabegeräte<br/><br/>kontaktsteuergerät sensitron<br/><br/>pmh-dreibackenpräzisionsspannfutter durchmesser 160mm<br/><br/>fussschalter für el. gesteuerte spannmittel<br/><br/>anschliffsensorik<br/><br/>2 der 4 plätze im revolver bestückt:<br/><br/>- innenschleifspindel fischer mfv 1275  mit 75.000 u/min<br/>- aussenschleifspindel für scheibendurchmesser 250mmwerkstückspindelstock :<br/><br/>zum fliegendschleifen. wälzgelagert.<br/>rundheitsgenauigkeit bei auslieferung 0,0004mm.<br/>antrieb über ac-servomotor mit fanuc.<br/>spannmittelaufnahme camlock 6.<br/>integriertes pick-up zum aussen- und innenrundschleifen ab durchmesser 10mm<br/>sowie zum schulterschleifen ab 1mm schulterhöhe.<br/><br/>innenschleiftisch:<br/><br/>auf dem kreuzschlitten aufgebaut mit 4 werkzeugpositionen.<br/>davon eine aussenschleifvorrichtung.<br/>schwenkbewegung cnc-gesteuert, antrieb über ac-servomotor.<br/><br/>werkstücktisch:<br/><br/>inkl. luftabhebung und hydraulischer klemmung<br/>schwenkbereich +/- 30°<br/>winkeleinstellung über cnc-achse.<br/><br/>querachse x:<br/><br/>verfahrweg 120mm<br/>vorschubgeschwindigkeit 0,001-5.000 mm/min<br/><br/>längsachse z:<br/><br/>verfahrweg 500mm<br/>vorschubgeschwindigkeit 0,001-10.000 mm/min<br/><br/>cnc-steuerung fanuc 16gca:<br/><br/>-anwenderspeicher 60 (24kb) meter für werkstückprogramme, einricht- und<br/> scheibendaten<br/>- 200 programmspeicherplätze<br/>-integrierte sps-steuerung.<br/><br/>studer betriebssystem release a zu fanuc 16gca bestehend aus:<br/><br/>1. einrichtzyklen bedienergeführt<br/>2. bearbeitungszyklen für:<br/>    -durchmesserbearbeitung<br/>    -schulterbearbeitung<br/>    -konusbearbeitung<br/>    -freie konturen (x/z)<br/><br/>3.automatisches abrichten inkl. freie scheibenform<br/>4.einschaltuhrfunktion<br/>5.leerlaufzyklus zur erhalt der thermischen maschinenstabilität<br/>studer pcu-terminal (fanuc):<br/>-tragbares bediengerät mit lcd-anzeige, tastatur,elektronischem handrad,<br/>override und zustimmtaste.<br/><br/>schnittstelle rs232 c<br/>für daten-ein-und ausgabegeräte<br/><br/>kontaktsteuergerät sensitron<br/><br/>pmh-dreibackenpräzisionsspannfutter durchmesser 160mm<br/><br/>fussschalter für el. gesteuerte spannmittel<br/><br/>anschliffsensorik<br/><br/><br/>- currently available:<br/>second (overhauled) fischer spindle 75.000 rpm, against surcharge<br/><br/><br/><br/>die werkzeugmaschine entspricht zum derzeitigen zeitpunkt nicht den grundlegenden sicherheits- und schutzanforderungen wie in der betrsichv 2015 genannt.<br/>eine anhebung des erforderlichen mindest-schutzzieles ist mittels einer gefährdungsbeurteilung nach betrsichv zu ermitteln.<br/><br/><br/><br/> GRINDING DIAMETER: 350 MM
GRINDING LENGTH: 9999999999999999999999999 MM
CENTRE HEIGHT: 175 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
MACHINE FROM MEDICINE TECHNIC.
FULLY MAINTAINED BY STUDER.

DELIVERY STATUS IN 2002:

WERKSTüCKSPINDELSTOCK :

ZUM FLIEGENDSCHLEIFEN. WäLZGELAGERT.
RUNDHEITSGENAUIGKEIT BEI AUSLIEFERUNG 0,0004MM.
ANTRIEB üBER AC-SERVOMOTOR MIT FANUC.
SPANNMITTELAUFNAHME CAMLOCK 6.
INTEGRIERTES PICK-UP ZUM AUSSEN- UND INNENRUNDSCHLEIFEN AB DURCHMESSER 10MM
SOWIE ZUM SCHULTERSCHLEIFEN AB 1MM SCHULTERHöHE.

INNENSCHLEIFTISCH:

AUF DEM KREUZSCHLITTEN AUFGEBAUT MIT 4 WERKZEUGPOSITIONEN.
DAVON EINE AUSSENSCHLEIFVORRICHTUNG.
SCHWENKBEWEGUNG CNC-GESTEUERT, ANTRIEB üBER AC-SERVOMOTOR.

WERKSTüCKTISCH:

INKL. LUFTABHEBUNG UND HYDRAULISCHER KLEMMUNG
SCHWENKBEREICH +/- 30°
WINKELEINSTELLUNG üBER CNC-ACHSE.

QUERACHSE X:

VERFAHRWEG 120MM
VORSCHUBGESCHWINDIGKEIT 0,001-5.000 MM/MIN

LäNGSACHSE Z:

VERFAHRWEG 500MM
VORSCHUBGESCHWINDIGKEIT 0,001-10.000 MM/MIN

CNC-STEUERUNG FANUC 16GCA:

-ANWENDERSPEICHER 60 (24KB) METER FüR WERKSTüCKPROGRAMME, EINRICHT- UND
SCHEIBENDATEN
- 200 PROGRAMMSPEICHERPLäTZE
-INTEGRIERTE SPS-STEUERUNG.

STUDER BETRIEBSSYSTEM RELEASE A ZU FANUC 16GCA BESTEHEND AUS:

1. EINRICHTZYKLEN BEDIENERGEFüHRT
2. BEARBEITUNGSZYKLEN FüR:
-DURCHMESSERBEARBEITUNG
-SCHULTERBEARBEITUNG
-KONUSBEARBEITUNG
-FREIE KONTUREN (X/Z)

3.AUTOMATISCHES ABRICHTEN INKL. FREIE SCHEIBENFORM
4.EINSCHALTUHRFUNKTION
5.LEERLAUFZYKLUS ZUR ERHALT DER THERMISCHEN MASCHINENSTABILITäT
STUDER PCU-TERMINAL (FANUC):
-TRAGBARES BEDIENGERäT MIT LCD-ANZEIGE, TASTATUR,ELEKTRONISCHEM HANDRAD,
OVERRIDE UND ZUSTIMMTASTE.

SCHNITTSTELLE RS232 C
FüR DATEN-EIN-UND AUSGABEGERäTE

KONTAKTSTEUERGERäT SENSITRON

PMH-DREIBACKENPRäZISIONSSPANNFUTTER DURCHMESSER 160MM

FUSSSCHALTER FüR EL. GESTEUERTE SPANNMITTEL

ANSCHLIFFSENSORIK

2 DER 4 PLäTZE IM REVOLVER BESTüCKT:

- INNENSCHLEIFSPINDEL FISCHER MFV 1275 MIT 75.000 U/MIN
- AUSSENSCHLEIFSPINDEL FüR SCHEIBENDURCHMESSER 250MMWERKSTüCKSPINDELSTOCK :

ZUM FLIEGENDSCHLEIFEN. WäLZGELAGERT.
RUNDHEITSGENAUIGKEIT BEI AUSLIEFERUNG 0,0004MM.
ANTRIEB üBER AC-SERVOMOTOR MIT FANUC.
SPANNMITTELAUFNAHME CAMLOCK 6.
INTEGRIERTES PICK-UP ZUM AUSSEN- UND INNENRUNDSCHLEIFEN AB DURCHMESSER 10MM
SOWIE ZUM SCHULTERSCHLEIFEN AB 1MM SCHULTERHöHE.

INNENSCHLEIFTISCH:

AUF DEM KREUZSCHLITTEN AUFGEBAUT MIT 4 WERKZEUGPOSITIONEN.
DAVON EINE AUSSENSCHLEIFVORRICHTUNG.
SCHWENKBEWEGUNG CNC-GESTEUERT, ANTRIEB üBER AC-SERVOMOTOR.

WERKSTüCKTISCH:

INKL. LUFTABHEBUNG UND HYDRAULISCHER KLEMMUNG
SCHWENKBEREICH +/- 30°
WINKELEINSTELLUNG üBER CNC-ACHSE.

QUERACHSE X:

VERFAHRWEG 120MM
VORSCHUBGESCHWINDIGKEIT 0,001-5.000 MM/MIN

LäNGSACHSE Z:

VERFAHRWEG 500MM
VORSCHUBGESCHWINDIGKEIT 0,001-10.000 MM/MIN

CNC-STEUERUNG FANUC 16GCA:

-ANWENDERSPEICHER 60 (24KB) METER FüR WERKSTüCKPROGRAMME, EINRICHT- UND
SCHEIBENDATEN
- 200 PROGRAMMSPEICHERPLäTZE
-INTEGRIERTE SPS-STEUERUNG.

STUDER BETRIEBSSYSTEM RELEASE A ZU FANUC 16GCA BESTEHEND AUS:

1. EINRICHTZYKLEN BEDIENERGEFüHRT
2. BEARBEITUNGSZYKLEN FüR:
-DURCHMESSERBEARBEITUNG
-SCHULTERBEARBEITUNG
-KONUSBEARBEITUNG
-FREIE KONTUREN (X/Z)

3.AUTOMATISCHES ABRICHTEN INKL. FREIE SCHEIBENFORM
4.EINSCHALTUHRFUNKTION
5.LEERLAUFZYKLUS ZUR ERHALT DER THERMISCHEN MASCHINENSTABILITäT
STUDER PCU-TERMINAL (FANUC):
-TRAGBARES BEDIENGERäT MIT LCD-ANZEIGE, TASTATUR,ELEKTRONISCHEM HANDRAD,
OVERRIDE UND ZUSTIMMTASTE.

SCHNITTSTELLE RS232 C
FüR DATEN-EIN-UND AUSGABEGERäTE

KONTAKTSTEUERGERäT SENSITRON

PMH-DREIBACKENPRäZISIONSSPANNFUTTER DURCHMESSER 160MM

FUSSSCHALTER FüR EL. GESTEUERTE SPANNMITTEL

ANSCHLIFFSENSORIK


- CURRENTLY AVAILABLE:
SECOND (OVERHAULED) FISCHER SPINDLE 75.000 RPM, AGAINST SURCHARGE



DIE WERKZEUGMASCHINE ENTSPRICHT ZUM DERZEITIGEN ZEITPUNKT NICHT DEN GRUNDLEGENDEN SICHERHEITS- UND SCHUTZANFORDERUNGEN WIE IN DER BETRSICHV 2015 GENANNT.
EINE ANHEBUNG DES ERFORDERLICHEN MINDEST-SCHUTZZIELES IST MITTELS EINER GEFäHRDUNGSBEURTEILUNG NACH BETRSICHV ZU ERMITTELN.



Vendedor: BEMA
Año de construcción: usado
Precio: 22.000 €
Ubicación: Land-a vacuum filler is sold by the company frey

type: f-line f190

construction year: 2013

-with intestinal clamp

-with casing machine

-fill, portion, turn off

-filling power 3.600 kg / h

-machine housing and hopper made of stainless steel

-touch screen controls

-lift for 200 l buggies A VACUUM FILLER IS SOLD BY THE COMPANY FREY TYPE: F-LINE F190 CONSTRUCTION YEAR: 2013 -WITH INTESTINAL CLAMP -WITH CASING MACHINE -FILL, PORTION, TURN OFF -FILLING POWER 3.600 KG / H -MACHINE HOUSING AND HOPPER MADE OF STAINLESS STEEL -TOUCH SCREEN CONTROLS -LIFT FOR 200 L BUGGIES
Vendedor: An-und Verkauf von Fleischereimaschinen
Año de construcción: usado
Ubicación: Land-pressure: 300 t<br/>chamfer lenght: 6050 mm<br/>control: cybelec modeva 10s <br/>total power requirement: 38 kw<br/>weight of the machine ca.: 33000 kg<br/><br/><br/><br/><br/> PRESSURE: 300 T
CHAMFER LENGHT: 6050 MM
CONTROL: CYBELEC MODEVA 10S
TOTAL POWER REQUIREMENT: 38 KW
WEIGHT OF THE MACHINE CA.: 33000 KG




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-schuette multi spindle automatic lathe
sfh 160
with 3 jaw chuck
thread cutting device
loading system  SCHUETTE MULTI SPINDLE AUTOMATIC LATHE SFH 160 WITH 3 JAW CHUCK THREAD CUTTING DEVICE LOADING SYSTEM
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>chamfer lenght: 3050 mm<br/>control: cybelec modeva 10s <br/><br/><br/><br/><br/> PRESSURE: 150 T
CHAMFER LENGHT: 3050 MM
CONTROL: CYBELEC MODEVA 10S




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-multi spindle automatic lathe afh 130-8 pour dnt proj. no. 000310 year 1991
8 spindle rotary feeder
collet chuck
in dnt version, no change gears for speed and cycle time required
-1 set of curves for cross slide - 1 set of curves for longitudinal slide high pressure coolant pump
2 sep. control panels
spindle stop setup

balluff cam schaltwerk
wã¶hrle clear text display
 MULTI SPINDLE AUTOMATIC LATHE AFH 130-8 POUR DNT PROJ. NO. 000310 YEAR 1991 8 SPINDLE ROTARY FEEDER COLLET CHUCK IN DNT VERSION, NO CHANGE GEARS FOR SPEED AND CYCLE TIME REQUIRED -1 SET OF CURVES FOR CROSS SLIDE - 1 SET OF CURVES FOR LONGITUDINAL SLIDE HIGH PRESSURE COOLANT PUMP 2 SEP. CONTROL PANELS SPINDLE STOP SETUP BALLUFF CAM SCHALTWERK W&ATILDE;&PARA;HRLE CLEAR TEXT DISPLAY
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 3200 mm<br/>plate thickness: 3 mm<br/>: 300 mm<br/>control: system 5000 <br/>total power requirement: 4,5 kw<br/>weight of the machine ca.: 4400 kg<br/><br/><br/><br/><br/> SHEET WIDTH: 3200 MM
PLATE THICKNESS: 3 MM
: 300 MM
CONTROL: SYSTEM 5000
TOTAL POWER REQUIREMENT: 4,5 KW
WEIGHT OF THE MACHINE CA.: 4400 KG




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-schã¼tte multi spindle automatic lathe
pour sf 20-6
curve controlled number of spindles: 6

with mechanical transmission

rod diameter: approx. 20 mm
sw 17 mm
ak 18 mm
uk 14 mm

max bar feeder: 80 /(160) mm

independent longitudinal slide number: 6
total / working ways (standart): 63/40 mm
"" (special) to: 100/63 mm

number of independent cross slide: 6
total / working ways middle and upper carriage up: 32/20 mm
lower carriage up: 40/25 mm

spindle diameter: 224 mm
main time min/max: 0.36/150 sec.
productive time min./max.: 0.45/0.80 sec.

spindle speed from / to: 900-5000 u/min
2. area: 355-2000 u/min

nominal power of the motor: 15 kw
power supply: 50 kva
the drive motor speed: 1500 rpm
length * width (standard execution) 3705 * 1320 mm
incl. rod guide (standard execution) 6335 mm

approximate weight without rod guide and accessories: 4.6 to.
the rod guide approximately: 0.5 to.
total without accessories approx. to 5.1.
(all information according to manufacturer)

beiuyg98hw
equipment:
sub unit with rear processing
thread cutter gearbox with electric clutch
gewindescheidspindel
additional longitudinal slide on location: 1, 2 + 4, 5
discharge
hydraulic part tray in pos 6
force and farmer c02 fire equipment (non-operating)

electrical:

siemens s5 control
camshaft gear: mahani seperate control panel / control panel on the operating side and back
waheed clear text display
electrically prepared for bar loader (n)

other:
prepared for decentralized oil mist separator

machine is in our showroom under power! SCH&ATILDE;&FRAC14;TTE MULTI SPINDLE AUTOMATIC LATHE POUR SF 20-6 CURVE CONTROLLED NUMBER OF SPINDLES: 6 WITH MECHANICAL TRANSMISSION ROD DIAMETER: APPROX. 20 MM SW 17 MM AK 18 MM UK 14 MM MAX BAR FEEDER: 80 /(160) MM INDEPENDENT LONGITUDINAL SLIDE NUMBER: 6 TOTAL / WORKING WAYS (STANDART): 63/40 MM "" (SPECIAL) TO: 100/63 MM NUMBER OF INDEPENDENT CROSS SLIDE: 6 TOTAL / WORKING WAYS MIDDLE AND UPPER CARRIAGE UP: 32/20 MM LOWER CARRIAGE UP: 40/25 MM SPINDLE DIAMETER: 224 MM MAIN TIME MIN/MAX: 0.36/150 SEC. PRODUCTIVE TIME MIN./MAX.: 0.45/0.80 SEC. SPINDLE SPEED FROM / TO: 900-5000 U/MIN 2. AREA: 355-2000 U/MIN NOMINAL POWER OF THE MOTOR: 15 KW POWER SUPPLY: 50 KVA THE DRIVE MOTOR SPEED: 1500 RPM LENGTH * WIDTH (STANDARD EXECUTION) 3705 * 1320 MM INCL. ROD GUIDE (STANDARD EXECUTION) 6335 MM APPROXIMATE WEIGHT WITHOUT ROD GUIDE AND ACCESSORIES: 4.6 TO. THE ROD GUIDE APPROXIMATELY: 0.5 TO. TOTAL WITHOUT ACCESSORIES APPROX. TO 5.1. (ALL INFORMATION ACCORDING TO MANUFACTURER) BEIUYG98HW EQUIPMENT: SUB UNIT WITH REAR PROCESSING THREAD CUTTER GEARBOX WITH ELECTRIC CLUTCH GEWINDESCHEIDSPINDEL ADDITIONAL LONGITUDINAL SLIDE ON LOCATION: 1, 2 + 4, 5 DISCHARGE HYDRAULIC PART TRAY IN POS 6 FORCE AND FARMER C02 FIRE EQUIPMENT (NON-OPERATING) ELECTRICAL: SIEMENS S5 CONTROL CAMSHAFT GEAR: MAHANI SEPERATE CONTROL PANEL / CONTROL PANEL ON THE OPERATING SIDE AND BACK WAHEED CLEAR TEXT DISPLAY ELECTRICALLY PREPARED FOR BAR LOADER (N) OTHER: PREPARED FOR DECENTRALIZED OIL MIST SEPARATOR MACHINE IS IN OUR SHOWROOM UNDER POWER!
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 3200 mm<br/>plate thickness: 6 mm<br/>control: system 6000 <br/>total power requirement: 17 kw<br/>weight of the machine ca.: 9200 kg<br/><br/><br/><br/><br/> SHEET WIDTH: 3200 MM
PLATE THICKNESS: 6 MM
CONTROL: SYSTEM 6000
TOTAL POWER REQUIREMENT: 17 KW
WEIGHT OF THE MACHINE CA.: 9200 KG




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-schuette multi spindle automatic lathe
pour sf 20-6
curve controlled number of spindles: 6

with mechanical transmission

rod diameter: approx. 20 mm
sw 17 mm
ak 18 mm
uk 14 mm

max bar feeder: 80 /(160) mm

independent longitudinal slide number: 6
total / working ways (standart): 63/40 mm
SCHUETTE MULTI SPINDLE AUTOMATIC LATHE POUR SF 20-6 CURVE CONTROLLED NUMBER OF SPINDLES: 6 WITH MECHANICAL TRANSMISSION ROD DIAMETER: APPROX. 20 MM SW 17 MM AK 18 MM UK 14 MM MAX BAR FEEDER: 80 /(160) MM INDEPENDENT LONGITUDINAL SLIDE NUMBER: 6 TOTAL / WORKING WAYS (STANDART): 63/40 MM "" (SPECIAL) TO: 100/63 MM NUMBER OF INDEPENDENT CROSS SLIDE: 6 TOTAL / WORKING WAYS MIDDLE AND UPPER CARRIAGE UP: 32/20 MM LOWER CARRIAGE UP: 40/25 MM SPINDLE DIAMETER: 224 MM MAIN TIME MIN/MAX: 0.36/150 SEC. PRODUCTIVE TIME MIN./MAX.: 0.45/0.80 SEC. SPINDLE SPEED FROM / TO: 900-5000 U/MIN 2. AREA: 355-2000 U/MIN NOMINAL POWER OF THE MOTOR: 15 KW POWER SUPPLY: 50 KVA THE DRIVE MOTOR SPEED: 1500 RPM LENGTH * WIDTH (STANDARD EXECUTION) 3705 * 1320 MM INCL. ROD GUIDE (STANDARD EXECUTION) 6335 MM APPROXIMATE WEIGHT WITHOUT ROD GUIDE AND ACCESSORIES: 4.6 TO. THE ROD GUIDE APPROXIMATELY: 0.5 TO. TOTAL WITHOUT ACCESSORIES APPROX. TO 5.1. (ALL INFORMATION ACCORDING TO MANUFACTURER) BEIUYG98HW EQUIPMENT: SUB UNIT WITH REAR PROCESSING THREAD CUTTER GEARBOX WITH ELECTRIC CLUTCH GEWINDESCHEIDSPINDEL ADDITIONAL LONGITUDINAL SLIDE ON LOCATION: 1, 2 + 4, 5 DISCHARGE HYDRAULIC PART TRAY IN POS 6 FORCE AND FARMER C02 FIRE EQUIPMENT (NON-OPERATING) ELECTRICAL: SIEMENS S5 CONTROL CAMSHAFT GEAR: MAHANI SEPERATE CONTROL PANEL / CONTROL PANEL ON THE OPERATING SIDE AND BACK WAHEED CLEAR TEXT DISPLAY ELECTRICALLY PREPARED FOR BAR LOADER (N) OTHER: PREPARED FOR DECENTRALIZED OIL MIST SEPARATOR MACHINE IS IN OUR SHOWROOM UNDER POWER!
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 4000 x 2900 x 3000 mm<br/>description: haas vm-3 vertical machining centre<br> - serial no.: 1121143<br> - read off spindle hours: <b>only 22!</b><br> - travel (x/y/z): 1016/660/635 mm<br> - thurst (x/y/z): approx. 18 kn<br> - rapids (x/y/z): up to 18 m/min<br> - spindle speed: up to 12.000 rpm<br> - table dimensions: 1372 x 635 mm<br> - with t-slots in both x and y directions<br> - max. table load: 1588 kg<br> - taper: sk 40<br> - 24-fold tool changer<br> - max. tool diameter: 76 mm<br> - max. tool length: 279 mm<br> - tool to tool/chip to chip: 2,8 respectively 3,6 sec<br> - with automatic chip conveyor system<br> - with haas cnc control<br> - comes with haas tr 160 2 axis turn and swivel table for full fourth and fifth axis operations (already dismantled according to pictures)<br> - comes with renishaw probe as well as tool measuring device<br> - attention: only wax has been processed on this machine<br> WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2900 X 3000 MM
DESCRIPTION: HAAS VM-3 VERTICAL MACHINING CENTRE
- SERIAL NO.: 1121143
- READ OFF SPINDLE HOURS: ONLY 22!
- TRAVEL (X/Y/Z): 1016/660/635 MM
- THURST (X/Y/Z): APPROX. 18 KN
- RAPIDS (X/Y/Z): UP TO 18 M/MIN
- SPINDLE SPEED: UP TO 12.000 RPM
- TABLE DIMENSIONS: 1372 X 635 MM
- WITH T-SLOTS IN BOTH X AND Y DIRECTIONS
- MAX. TABLE LOAD: 1588 KG
- TAPER: SK 40
- 24-FOLD TOOL CHANGER
- MAX. TOOL DIAMETER: 76 MM
- MAX. TOOL LENGTH: 279 MM
- TOOL TO TOOL/CHIP TO CHIP: 2,8 RESPECTIVELY 3,6 SEC
- WITH AUTOMATIC CHIP CONVEYOR SYSTEM
- WITH HAAS CNC CONTROL
- COMES WITH HAAS TR 160 2 AXIS TURN AND SWIVEL TABLE FOR FULL FOURTH AND FIFTH AXIS OPERATIONS (ALREADY DISMANTLED ACCORDING TO PICTURES)
- COMES WITH RENISHAW PROBE AS WELL AS TOOL MEASURING DEVICE
- ATTENTION: ONLY WAX HAS BEEN PROCESSED ON THIS MACHINE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land--booklet making system horizon vac-100 a-spf 20-fc 20 
-year 2004 - 3,9 mil. copies
-collator vac-100 a with 10 stations 
-stitching and folding spf-20 
-frontcutter ( trimmer ) fc-20 
-standard delivery- jogger 
-size max: 350 x 500 mm 
-size min: 120 x 148 mm 
-collating speed: up to 9.500 sh/hour 
-machine dimensions: 800x950x1960 mms. 
-max block thickness: 55 mms. - paper from 40 to 280 grms/sqm. 
-air feeder, computerized setup, digital counter, double sheet control, speed variator 
-damages free,all manuals and accessories, available immediately
  -BOOKLET MAKING SYSTEM HORIZON VAC-100 A-SPF 20-FC 20 -YEAR 2004 - 3,9 MIL. COPIES -COLLATOR VAC-100 A WITH 10 STATIONS -STITCHING AND FOLDING SPF-20 -FRONTCUTTER ( TRIMMER ) FC-20 -STANDARD DELIVERY- JOGGER -SIZE MAX: 350 X 500 MM -SIZE MIN: 120 X 148 MM -COLLATING SPEED: UP TO 9.500 SH/HOUR -MACHINE DIMENSIONS: 800X950X1960 MMS. -MAX BLOCK THICKNESS: 55 MMS. - PAPER FROM 40 TO 280 GRMS/SQM. -AIR FEEDER, COMPUTERIZED SETUP, DIGITAL COUNTER, DOUBLE SHEET CONTROL, SPEED VARIATOR -DAMAGES FREE,ALL MANUALS AND ACCESSORIES, AVAILABLE IMMEDIATELY
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 1800 x 1700 x 1500 mm<br/>description: electrode force 5000 n, emz control, l. electrode 902, including swivelling electrode trimming cutter brÄuer, outreach 840 mm, height 540 mm WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 1800 X 1700 X 1500 MM
DESCRIPTION: ELECTRODE FORCE 5000 N, EMZ CONTROL, L. ELECTRODE 902, INCLUDING SWIVELLING ELECTRODE TRIMMING CUTTER BRÄUER, OUTREACH 840 MM, HEIGHT 540 MM
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more CONTROL types: