196 ofertas

Año de construcción: usado
Ubicación: Land-well-functioning used deutz engine (diesel) type ba12l714

155 kw at 1500 rpm

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED DEUTZ ENGINE (DIESEL) TYPE BA12L714 155 KW AT 1500 RPM WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Precio: 7.900 €
Ubicación: Land-; mileage [km]: 1; transmission: sonstige; front tyre size: ; rear tyre size: ; colour: rot; wheelbase: ; cargo space dimensions [lxbxh]: xx ; MILEAGE [KM]: 1; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: ROT; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: XX
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-yamato multihead weigher adw714 swh

reconditioned with many new parts.
superb high quality yamato 714 for sale. this particular machine has been rebuild with many news parts and electrics.
machine is reconditioned to very high standards.
delivered with in-feed funnel that can be adjusted for many types of products.
a much more recent rcu810-a coloured control panel. we’ve upgraded to this system compared to the old rcu600.
new stainless steel parts, all dimple plated suitable for a lot of products. this prevents product from sticking.
vibrating gutters have been swapped.
all motors, weighing cells and bearings have been checked, when necessary some have been swapped for new ones.
a very high-end machine that is in perfect working condition. ready for immediate production.
because of 14 large heads this machine is capable of processing large products and fast production.
capable of reaching 90 weighings per minute (depending on set-up and product). weighing range per portion from 20-3000 gram. able of doing a multi-dump to go even higher than 3000 gram per portion.
have a look at the video below for a quick impression of the machine.
for more specific information contact us. we are very experienced with yamato multihead weighers. YAMATO MULTIHEAD WEIGHER ADW714 SWH RECONDITIONED WITH MANY NEW PARTS. SUPERB HIGH QUALITY YAMATO 714 FOR SALE. THIS PARTICULAR MACHINE HAS BEEN REBUILD WITH MANY NEWS PARTS AND ELECTRICS. MACHINE IS RECONDITIONED TO VERY HIGH STANDARDS. DELIVERED WITH IN-FEED FUNNEL THAT CAN BE ADJUSTED FOR MANY TYPES OF PRODUCTS. A MUCH MORE RECENT RCU810-A COLOURED CONTROL PANEL. WE’VE UPGRADED TO THIS SYSTEM COMPARED TO THE OLD RCU600. NEW STAINLESS STEEL PARTS, ALL DIMPLE PLATED SUITABLE FOR A LOT OF PRODUCTS. THIS PREVENTS PRODUCT FROM STICKING. VIBRATING GUTTERS HAVE BEEN SWAPPED. ALL MOTORS, WEIGHING CELLS AND BEARINGS HAVE BEEN CHECKED, WHEN NECESSARY SOME HAVE BEEN SWAPPED FOR NEW ONES. A VERY HIGH-END MACHINE THAT IS IN PERFECT WORKING CONDITION. READY FOR IMMEDIATE PRODUCTION. BECAUSE OF 14 LARGE HEADS THIS MACHINE IS CAPABLE OF PROCESSING LARGE PRODUCTS AND FAST PRODUCTION. CAPABLE OF REACHING 90 WEIGHINGS PER MINUTE (DEPENDING ON SET-UP AND PRODUCT). WEIGHING RANGE PER PORTION FROM 20-3000 GRAM. ABLE OF DOING A MULTI-DUMP TO GO EVEN HIGHER THAN 3000 GRAM PER PORTION. HAVE A LOOK AT THE VIDEO BELOW FOR A QUICK IMPRESSION OF THE MACHINE. FOR MORE SPECIFIC INFORMATION CONTACT US. WE ARE VERY EXPERIENCED WITH YAMATO MULTIHEAD WEIGHERS.
Vendedor: Scotraco B.V.
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 2740; rear tyres remaining: 89; front tyres remaining: 87; inspection date: 2018; amount of previous owners: 1; maximum lift capacity [kg]: 200; full service history: ja ; GROSS WEIGHT [KG]: 2740; REAR TYRES REMAINING: 89; FRONT TYRES REMAINING: 87; INSPECTION DATE: 2018; AMOUNT OF PREVIOUS OWNERS: 1; MAXIMUM LIFT CAPACITY [KG]: 200; FULL SERVICE HISTORY: JA
Vendedor: Rothlehner Arbeitsbühnen GmbH
Año de construcción: usado
Ubicación: Land-data:

-year of construction: 1995
-1 pair of brushes
-identical as delta progetti glass washing machine
-machine can be seen in de-92714 pleystein

price: state as is: â?¬3.900 DATA: -YEAR OF CONSTRUCTION: 1995 -1 PAIR OF BRUSHES -IDENTICAL AS DELTA PROGETTI GLASS WASHING MACHINE -MACHINE CAN BE SEEN IN DE-92714 PLEYSTEIN PRICE: STATE AS IS: Â?¬3.900
Vendedor: Mirrotech Glas & Spiegel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 10 €
Ubicación: Land-weight approx.: 30 kg<br/>dimensions (l x w x h) approx.: 1100 x 800 x 700 mm<br/>description: serial number 42952, motor is defective and dismantled. WEIGHT APPROX.: 30 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 800 X 700 MM
DESCRIPTION: SERIAL NUMBER 42952, MOTOR IS DEFECTIVE AND DISMANTLED.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-there is one wrapping machine schlichter s3-35/2 with a shrinking tunnel schlichter ddk 50 available, connected load wrapper/ shrinking tunnel: 4/ 18kw.  THERE IS ONE WRAPPING MACHINE SCHLICHTER S3-35/2 WITH A SHRINKING TUNNEL SCHLICHTER DDK 50 AVAILABLE, CONNECTED LOAD WRAPPER/ SHRINKING TUNNEL: 4/ 18KW.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 47 kg<br/>dimensions (l x w x h) approx.: 540 x 540 x 1000 mm<br/>description: serial number 1111281247141, cooling capacity 2.7 kw, air volume 800 m³/h, refrigerant r 407 c, max. system pressure 24 bar, 230 v, 50 hz, max. current consumption 4.9 a, max. power consumption 1.12 kw, operating range 3 to 30° c, protection class epx 4, operating hours according to readout 13655 WEIGHT APPROX.: 47 KG
DIMENSIONS (L X W X H) APPROX.: 540 X 540 X 1000 MM
DESCRIPTION: SERIAL NUMBER 1111281247141, COOLING CAPACITY 2.7 KW, AIR VOLUME 800 M³/H, REFRIGERANT R 407 C, MAX. SYSTEM PRESSURE 24 BAR, 230 V, 50 HZ, MAX. CURRENT CONSUMPTION 4.9 A, MAX. POWER CONSUMPTION 1.12 KW, OPERATING RANGE 3 TO 30° C, PROTECTION CLASS EPX 4, OPERATING HOURS ACCORDING TO READOUT 13655
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: digma exeron
â?¢ model: 700 gc
stalco
year of construction: 1996
3d-band-steuerung andronic 400ibag
x-axis: 750mm
y axis: 500mm
z-axis: 400 mm
work table: 600 x 500 mm feed range: up to 20,000 mm / min
tool changers: 16 x
current meter reading of the digma: 45714,75 h
maximum spindle speed: 30,000 rpm
â?¢ incl. 44 toolholders ski 25
â?¢ 3r workpal pallet changer 8 pallets 3r dynafix
â?¢ cellar graphite extraction MANUFACTURER: DIGMA EXERON &ACIRC;?&CENT; MODEL: 700 GC STALCO YEAR OF CONSTRUCTION: 1996 3D-BAND-STEUERUNG ANDRONIC 400IBAG X-AXIS: 750MM Y AXIS: 500MM Z-AXIS: 400 MM WORK TABLE: 600 X 500 MM FEED RANGE: UP TO 20,000 MM / MIN TOOL CHANGERS: 16 X CURRENT METER READING OF THE DIGMA: 45714,75 H MAXIMUM SPINDLE SPEED: 30,000 RPM &ACIRC;?&CENT; INCL. 44 TOOLHOLDERS SKI 25 &ACIRC;?&CENT; 3R WORKPAL PALLET CHANGER 8 PALLETS 3R DYNAFIX &ACIRC;?&CENT; CELLAR GRAPHITE EXTRACTION
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 47 kg<br/>dimensions (l x w x h) approx.: 540 x 540 x 1000 mm<br/>description: serial number 1111281247142, cooling capacity 2.7 kw, air volume 800 m³/h, refrigerant r 407 c, max. system pressure 24 bar, 230 v, 50 hz, max. current consumption 4.9 a, max. power consumption 1.12 kw, operating range 3 to 30° c, protection class epx 4, operating hours according to readout 5565 WEIGHT APPROX.: 47 KG
DIMENSIONS (L X W X H) APPROX.: 540 X 540 X 1000 MM
DESCRIPTION: SERIAL NUMBER 1111281247142, COOLING CAPACITY 2.7 KW, AIR VOLUME 800 M³/H, REFRIGERANT R 407 C, MAX. SYSTEM PRESSURE 24 BAR, 230 V, 50 HZ, MAX. CURRENT CONSUMPTION 4.9 A, MAX. POWER CONSUMPTION 1.12 KW, OPERATING RANGE 3 TO 30° C, PROTECTION CLASS EPX 4, OPERATING HOURS ACCORDING TO READOUT 5565
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc control: heidenhain itnc530 3d
x axis: 3.000 mm
y axis: 560 mm
z axis: 720 mm
tool charger capacity: 30 pos.
cone type: sk40
table dimension: 3.400 x 600 mm
speed spindle: 12.000 rpm
power spindle: 35/25 kw (40/100%)

accessories:

electronic handwheel.
swivel milling head 6,300 rpm sk 40
head swivel range ± 90 °, sub-steps 2.5 °
travel: y 540.
operating mode 4 (process monitoring in production)
nc dividing head hofmann rw / nc 220
left working space
measuring system indirect
                         
production package with slotted screen filter
40 / bar / 23l / 900 l container
incl. spear air for linear measuring systems
       
chip conveyor
ikz
flushing gun
closed cabin

turn-on hours: 50.714 hours
spindle hours: 18.015 hours  CNC CONTROL: HEIDENHAIN ITNC530 3D X AXIS: 3.000 MM Y AXIS: 560 MM Z AXIS: 720 MM TOOL CHARGER CAPACITY: 30 POS. CONE TYPE: SK40 TABLE DIMENSION: 3.400 X 600 MM SPEED SPINDLE: 12.000 RPM POWER SPINDLE: 35/25 KW (40/100%) ACCESSORIES: ELECTRONIC HANDWHEEL. SWIVEL MILLING HEAD 6,300 RPM SK 40 HEAD SWIVEL RANGE ± 90 °, SUB-STEPS 2.5 ° TRAVEL: Y 540. OPERATING MODE 4 (PROCESS MONITORING IN PRODUCTION) NC DIVIDING HEAD HOFMANN RW / NC 220 LEFT WORKING SPACE MEASURING SYSTEM INDIRECT PRODUCTION PACKAGE WITH SLOTTED SCREEN FILTER 40 / BAR / 23L / 900 L CONTAINER INCL. SPEAR AIR FOR LINEAR MEASURING SYSTEMS CHIP CONVEYOR IKZ FLUSHING GUN CLOSED CABIN TURN-ON HOURS: 50.714 HOURS SPINDLE HOURS: 18.015 HOURS
Vendedor: 3axisgroup GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 47 kg<br/>dimensions (l x w x h) approx.: 540 x 540 x 1000 mm<br/>description: serial number 1111281247144, cooling capacity 2.7 kw, air volume 800 m³/h, refrigerant r 407 c, max. system pressure 24 bar, 230 v, 50 hz, max. current consumption 4.9 a, max. power consumption 1.12 kw, operating range 3 to 30° c, protection class epx 4,operating hours according to readout 4221 WEIGHT APPROX.: 47 KG
DIMENSIONS (L X W X H) APPROX.: 540 X 540 X 1000 MM
DESCRIPTION: SERIAL NUMBER 1111281247144, COOLING CAPACITY 2.7 KW, AIR VOLUME 800 M³/H, REFRIGERANT R 407 C, MAX. SYSTEM PRESSURE 24 BAR, 230 V, 50 HZ, MAX. CURRENT CONSUMPTION 4.9 A, MAX. POWER CONSUMPTION 1.12 KW, OPERATING RANGE 3 TO 30° C, PROTECTION CLASS EPX 4,OPERATING HOURS ACCORDING TO READOUT 4221
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-alcolor dampening ALCOLOR DAMPENING
Vendedor: Explus International (HK) Ltd
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 90 kg<br/>dimensions (l x w x h) approx.: 1800 x 1000 x 700 mm<br/>description: incl. 4 auger drills and 1 drill extension, drill diameter 100/150/200/250 mm WEIGHT APPROX.: 90 KG
DIMENSIONS (L X W X H) APPROX.: 1800 X 1000 X 700 MM
DESCRIPTION: INCL. 4 AUGER DRILLS AND 1 DRILL EXTENSION, DRILL DIAMETER 100/150/200/250 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine no.: 71407661
 MACHINE NO.: 71407661
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cutting width 92 cm. 
computer programme with plasma monitor 
99 programmes with 2000 steps 
central air float table 
cast iron side tables 
2 speed back gauge 
illuminated cutting 
high-speed steel knives 
ffm guarding system 
rear plastic guard 
video: abcs://youtu.be/scp5i-pfrse
 CUTTING WIDTH 92 CM. COMPUTER PROGRAMME WITH PLASMA MONITOR 99 PROGRAMMES WITH 2000 STEPS CENTRAL AIR FLOAT TABLE CAST IRON SIDE TABLES 2 SPEED BACK GAUGE ILLUMINATED CUTTING HIGH-SPEED STEEL KNIVES FFM GUARDING SYSTEM REAR PLASTIC GUARD VIDEO: ABCS://YOUTU.BE/SCP5I-PFRSE
Vendedor: I.E.S. (Scotland) Limited
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: haas
model: vf-3ssythe
application type: milling
machine type: machining center (vertical)
availability: immediately
construction year: 2007
production hours: 23000
location: croatia
origin country: usa

general data:
measurements width: 3200 mm
measurements depth: 3000 mm
measurements height: 3200 mm
machine weight: 7140 kg

main drive:
number of spindle: 1 
spindle speed range: 12000 1/min

control unit:
brand: haas

cnc main language: english
cnc language customizable: yes

movement:
x-axis movement: 1016 mm
y-axis movement: 660 mm
z-axis movement: 635 mm

workpiece:
workpiece weight: 794 kg

table:
outer length: 1372 mm
outer width: 635 mm

tools:
max weight: 5.4 kg
max tool diameter: 64/127 mm
max tool length: 279 mm

media:
main electronic connection: 360 / 480 v 
chip conveyer: yes
internal cooling: yes

additional equipment:
1 - automatic tool changer (24 slots)
2 - 4th axis

see full technical specifications of this machine at:
abc://bit.ly/2xcqelp OVERVIEW: BRAND: HAAS MODEL: VF-3SSYTHE APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTER (VERTICAL) AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2007 PRODUCTION HOURS: 23000 LOCATION: CROATIA ORIGIN COUNTRY: USA GENERAL DATA: MEASUREMENTS WIDTH: 3200 MM MEASUREMENTS DEPTH: 3000 MM MEASUREMENTS HEIGHT: 3200 MM MACHINE WEIGHT: 7140 KG MAIN DRIVE: NUMBER OF SPINDLE: 1 SPINDLE SPEED RANGE: 12000 1/MIN CONTROL UNIT: BRAND: HAAS CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MOVEMENT: X-AXIS MOVEMENT: 1016 MM Y-AXIS MOVEMENT: 660 MM Z-AXIS MOVEMENT: 635 MM WORKPIECE: WORKPIECE WEIGHT: 794 KG TABLE: OUTER LENGTH: 1372 MM OUTER WIDTH: 635 MM TOOLS: MAX WEIGHT: 5.4 KG MAX TOOL DIAMETER: 64/127 MM MAX TOOL LENGTH: 279 MM MEDIA: MAIN ELECTRONIC CONNECTION: 360 / 480 V CHIP CONVEYER: YES INTERNAL COOLING: YES ADDITIONAL EQUIPMENT: 1 - AUTOMATIC TOOL CHANGER (24 SLOTS) 2 - 4TH AXIS SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2XCQELP
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-ref. 526
adast dominant 757 p
format 52z74 cm, year 2004, perfecting 1-4, superblue, technotrans, automatic ink rollers washers, semiautomatic plate chnge, ir dryer, technotrans alpha d, in production, price: 80 000 eur fca
 REF. 526 ADAST DOMINANT 757 P FORMAT 52Z74 CM, YEAR 2004, PERFECTING 1-4, SUPERBLUE, TECHNOTRANS, AUTOMATIC INK ROLLERS WASHERS, SEMIAUTOMATIC PLATE CHNGE, IR DRYER, TECHNOTRANS ALPHA D, IN PRODUCTION, PRICE: 80 000 EUR FCA
Vendedor: TM Machinery
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 600 €
Ubicación: Land-1 x pallet racking dexion vintage cameras

data:
-h: approx. 250 cm
-t: approx. 110 cm
-l: approx. 11.6 yds

-offer
-used - good condition dexion
-stand in bright zinc-plated
-trusses 280 cm
-trusses in bright zinc-plated

shelf consists of:
-5 x stand approx. 250 x 110 cm
-traverse 16 x 280 cm
-makes 36 pallet places.

price:
â?¬600 net
â?¬714 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible. 1 X PALLET RACKING DEXION VINTAGE CAMERAS DATA: -H: APPROX. 250 CM -T: APPROX. 110 CM -L: APPROX. 11.6 YDS -OFFER -USED - GOOD CONDITION DEXION -STAND IN BRIGHT ZINC-PLATED -TRUSSES 280 CM -TRUSSES IN BRIGHT ZINC-PLATED SHELF CONSISTS OF: -5 X STAND APPROX. 250 X 110 CM -TRAVERSE 16 X 280 CM -MAKES 36 PALLET PLACES. PRICE: &ACIRC;?&NOT;600 NET &ACIRC;?&NOT;714 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-yamato weighing and packing line, complete line
this line is currently being set-up in our warehouse. will be finished and ready for production second/ third week of september.

complete from a to z weighing and packing line. always very well maintained, serviced till mid-august 2018.
professionaly taken out of production, now in stock and ready for re-sell.
machinery
1) totebin lift. 200l. tote bins fit in this lift to take the product up and empty automatically on the vibrating gutter.
2) vibrating gutter to receive the product from the tote-bin lift. this will vibrate the product nicely to the yamato for a constant flow of product.
3) yamato sigma f1 714 weigher 14 head multihead weigher. (more information below)
equipped with dimple-plated stainless steel that makes this machine suitable for all kinds of product.
highly popular machine. parts and service are available.
4a) sandiacre vertical bagging machine with new couple year old control panel. with gas-flush installed.
4b) innotech revo 3800 vertical bagging machine. (more information below), photo’s and video’s can be found here.

5) optional: lock insight (2014) metal detector designed to be in lines like this for vertical bagging machines.
more information can be found here. 
6) optional: lazy susan rotating table. more information.

support
5) complete stainless steel platform, very large for space to walk on. also a wall to hang the buckets and clean everything off without having to bring everything down. constructed fully from stainless steel. teardrop platform to walk on, to prevent from slipping.
6) stairs to reach higher to the vibrating gutter. this to check the production and clean the highest parts of the line.
7) strong stainless steel cone to attach the vibrating gutter. this to prevent the shaking from the gutter will affect the weighing accuracy of the yamato.
it’s a very well maintained weighing and packing line that has been serviced to the highest standards.
the whole line was in production till last week august the 19th.
than professional taken out of production, and now in our warehouse where we’ll assemble it again to showcase it to potential customers.

we can offer the machinery as well as transport and installation.
we supply you with a complete solution.

yamato multihead weigher sigma adw 714swh
large 14 headed yamato multihead weigher from the sigma series. this machine is still being build today.
constructed completely out of stainless steel this machine has an ip65 rating and therefore suitable for moist products in moist production rooms. this particular model is a good working machine ideal for all kinds of products. because it has vibrating gutters and a vibrating central plate this machine can also process many kinds of moist sticky products.
the buckets are very large and capable of processing products with a length up to 180mm.
general specifications:
weighing heads: 14
weight range: up to 3.000g ( single drop )
weighing heads volume: 5.000cc
max. product length: 180mm
max. speed: ~80 weighing per minute at 500g.

innotech vertical bagging lines
excellent pre-owned innotech vertical bagging machines.
both lines have a very similar set-up for same results.
these are revo 3800-s vffs machines capable of packing up to 80 bags per minute.
thanks to impulse sealing and a continuous packing-flow this machine reaches very high packing numbers in very little time. delivered with 1 tool for 30cm wide pouches, different sizes are possible with the purchase of a new mould. bag width can vary between 80-350mm. length of the bag can reach up to 550mm. YAMATO WEIGHING AND PACKING LINE, COMPLETE LINE THIS LINE IS CURRENTLY BEING SET-UP IN OUR WAREHOUSE. WILL BE FINISHED AND READY FOR PRODUCTION SECOND/ THIRD WEEK OF SEPTEMBER. COMPLETE FROM A TO Z WEIGHING AND PACKING LINE. ALWAYS VERY WELL MAINTAINED, SERVICED TILL MID-AUGUST 2018. PROFESSIONALY TAKEN OUT OF PRODUCTION, NOW IN STOCK AND READY FOR RE-SELL. MACHINERY 1) TOTEBIN LIFT. 200L. TOTE BINS FIT IN THIS LIFT TO TAKE THE PRODUCT UP AND EMPTY AUTOMATICALLY ON THE VIBRATING GUTTER. 2) VIBRATING GUTTER TO RECEIVE THE PRODUCT FROM THE TOTE-BIN LIFT. THIS WILL VIBRATE THE PRODUCT NICELY TO THE YAMATO FOR A CONSTANT FLOW OF PRODUCT. 3) YAMATO SIGMA F1 714 WEIGHER 14 HEAD MULTIHEAD WEIGHER. (MORE INFORMATION BELOW) EQUIPPED WITH DIMPLE-PLATED STAINLESS STEEL THAT MAKES THIS MACHINE SUITABLE FOR ALL KINDS OF PRODUCT. HIGHLY POPULAR MACHINE. PARTS AND SERVICE ARE AVAILABLE. 4A) SANDIACRE VERTICAL BAGGING MACHINE WITH NEW COUPLE YEAR OLD CONTROL PANEL. WITH GAS-FLUSH INSTALLED. 4B) INNOTECH REVO 3800 VERTICAL BAGGING MACHINE. (MORE INFORMATION BELOW), PHOTO’S AND VIDEO’S CAN BE FOUND HERE. 5) OPTIONAL: LOCK INSIGHT (2014) METAL DETECTOR DESIGNED TO BE IN LINES LIKE THIS FOR VERTICAL BAGGING MACHINES. MORE INFORMATION CAN BE FOUND HERE. 6) OPTIONAL: LAZY SUSAN ROTATING TABLE. MORE INFORMATION. SUPPORT 5) COMPLETE STAINLESS STEEL PLATFORM, VERY LARGE FOR SPACE TO WALK ON. ALSO A WALL TO HANG THE BUCKETS AND CLEAN EVERYTHING OFF WITHOUT HAVING TO BRING EVERYTHING DOWN. CONSTRUCTED FULLY FROM STAINLESS STEEL. TEARDROP PLATFORM TO WALK ON, TO PREVENT FROM SLIPPING. 6) STAIRS TO REACH HIGHER TO THE VIBRATING GUTTER. THIS TO CHECK THE PRODUCTION AND CLEAN THE HIGHEST PARTS OF THE LINE. 7) STRONG STAINLESS STEEL CONE TO ATTACH THE VIBRATING GUTTER. THIS TO PREVENT THE SHAKING FROM THE GUTTER WILL AFFECT THE WEIGHING ACCURACY OF THE YAMATO. IT’S A VERY WELL MAINTAINED WEIGHING AND PACKING LINE THAT HAS BEEN SERVICED TO THE HIGHEST STANDARDS. THE WHOLE LINE WAS IN PRODUCTION TILL LAST WEEK AUGUST THE 19TH. THAN PROFESSIONAL TAKEN OUT OF PRODUCTION, AND NOW IN OUR WAREHOUSE WHERE WE’LL ASSEMBLE IT AGAIN TO SHOWCASE IT TO POTENTIAL CUSTOMERS. WE CAN OFFER THE MACHINERY AS WELL AS TRANSPORT AND INSTALLATION. WE SUPPLY YOU WITH A COMPLETE SOLUTION. YAMATO MULTIHEAD WEIGHER SIGMA ADW 714SWH LARGE 14 HEADED YAMATO MULTIHEAD WEIGHER FROM THE SIGMA SERIES. THIS MACHINE IS STILL BEING BUILD TODAY. CONSTRUCTED COMPLETELY OUT OF STAINLESS STEEL THIS MACHINE HAS AN IP65 RATING AND THEREFORE SUITABLE FOR MOIST PRODUCTS IN MOIST PRODUCTION ROOMS. THIS PARTICULAR MODEL IS A GOOD WORKING MACHINE IDEAL FOR ALL KINDS OF PRODUCTS. BECAUSE IT HAS VIBRATING GUTTERS AND A VIBRATING CENTRAL PLATE THIS MACHINE CAN ALSO PROCESS MANY KINDS OF MOIST STICKY PRODUCTS. THE BUCKETS ARE VERY LARGE AND CAPABLE OF PROCESSING PRODUCTS WITH A LENGTH UP TO 180MM. GENERAL SPECIFICATIONS: WEIGHING HEADS: 14 WEIGHT RANGE: UP TO 3.000G ( SINGLE DROP ) WEIGHING HEADS VOLUME: 5.000CC MAX. PRODUCT LENGTH: 180MM MAX. SPEED: ~80 WEIGHING PER MINUTE AT 500G. INNOTECH VERTICAL BAGGING LINES EXCELLENT PRE-OWNED INNOTECH VERTICAL BAGGING MACHINES. BOTH LINES HAVE A VERY SIMILAR SET-UP FOR SAME RESULTS. THESE ARE REVO 3800-S VFFS MACHINES CAPABLE OF PACKING UP TO 80 BAGS PER MINUTE. THANKS TO IMPULSE SEALING AND A CONTINUOUS PACKING-FLOW THIS MACHINE REACHES VERY HIGH PACKING NUMBERS IN VERY LITTLE TIME. DELIVERED WITH 1 TOOL FOR 30CM WIDE POUCHES, DIFFERENT SIZES ARE POSSIBLE WITH THE PURCHASE OF A NEW MOULD. BAG WIDTH CAN VARY BETWEEN 80-350MM. LENGTH OF THE BAG CAN REACH UP TO 550MM.
Vendedor: Scotraco B.V.
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-standard dampening
 STANDARD DAMPENING
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine no.: 515-1541,
year ca. 1982 
  MACHINE NO.: 515-1541, YEAR CA. 1982
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Precio: used machinery auction RESALE 1.700 €
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 2400 x 800 x 1400 mm<br/>description: lot of 5 new tool trolleys, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 2400 X 800 X 1400 MM
DESCRIPTION: LOT OF 5 NEW TOOL TROLLEYS, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year ca. 1985
machine no. 5520106

  YEAR CA. 1985 MACHINE NO. 5520106
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-standard dampening
  STANDARD DAMPENING
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-standard dampening
  STANDARD DAMPENING
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 1700 x 600 x 2100 mm<br/>description: compressor, serial number 0060827146, 10 bars, psi: 145, db(a): 68, 7,5 kw, voltage 400 v, a:15,2, tank capacity: 500 l, t/min: -10c°, t/max: 100c° WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 1700 X 600 X 2100 MM
DESCRIPTION: COMPRESSOR, SERIAL NUMBER 0060827146, 10 BARS, PSI: 145, DB(A): 68, 7,5 KW, VOLTAGE 400 V, A:15,2, TANK CAPACITY: 500 L, T/MIN: -10C°, T/MAX: 100C°
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-adast dominant 745 c, 
year 2001, 
water dampening
 ADAST DOMINANT 745 C, YEAR 2001, WATER DAMPENING
Vendedor: Explus International (HK) Ltd
Año de construcción: usado
Ubicación: Land-z-blade mixer (1x), make linden, type k ii n 35, no 1094, new 1980, material mild steel, capacity 48 ltr, useful 35 ltr, trough sizes 400x400x250mm, double geared, with adjustable packing glands, motor ± 3,0 kw, manual operated tilting, floorspace 2,2x0,9 m, total height 1,2 mz-blade mixerskneaders > z-blade mixers Z-BLADE MIXER (1X), MAKE LINDEN, TYPE K II N 35, NO 1094, NEW 1980, MATERIAL MILD STEEL, CAPACITY 48 LTR, USEFUL 35 LTR, TROUGH SIZES 400X400X250MM, DOUBLE GEARED, WITH ADJUSTABLE PACKING GLANDS, MOTOR ± 3,0 KW, MANUAL OPERATED TILTING, FLOORSPACE 2,2X0,9 M, TOTAL HEIGHT 1,2 MZ-BLADE MIXERSKNEADERS > Z-BLADE MIXERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-1 clamp perfect binder
 1 CLAMP PERFECT BINDER
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Ubicación: Land-platen heatexchanger (1x), make api schmidt-bretten, type sigma x49 scl, no pa-087714, new 2005, heating surface 146,8 m2, material stainless steel (1.4301), capacity 142/143 ltr, number of platens 360, platen sizes ± 1100x400mm, connections 4x dia. 100mm, working pressure 10 bar, test pressure 12,5 bar, max. temperature 100 degr. c., capacity 900 kw, floorspace 2,5x0,8 m, total height 1,6 m, weight 1500 kgplate heatexchangersheat exchangers > plate heatexchangers PLATEN HEATEXCHANGER (1X), MAKE API SCHMIDT-BRETTEN, TYPE SIGMA X49 SCL, NO PA-087714, NEW 2005, HEATING SURFACE 146,8 M2, MATERIAL STAINLESS STEEL (1.4301), CAPACITY 142/143 LTR, NUMBER OF PLATENS 360, PLATEN SIZES ± 1100X400MM, CONNECTIONS 4X DIA. 100MM, WORKING PRESSURE 10 BAR, TEST PRESSURE 12,5 BAR, MAX. TEMPERATURE 100 DEGR. C., CAPACITY 900 KW, FLOORSPACE 2,5X0,8 M, TOTAL HEIGHT 1,6 M, WEIGHT 1500 KGPLATE HEATEXCHANGERSHEAT EXCHANGERS > PLATE HEATEXCHANGERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-battenfeld ba 2000-1000bk make: battenfeld
type: ba 2000-1000bk
year of construction: 1999
machine number: 54714
control: b4
location: koszalin
country of origin: scandinavia
	
	
	
screw diameter: 55 mm
displacement: 522 cc
shot weight: 475 g
injection pressure: 1943 bar
	
clamping force: 2000 kn
tie bar distance: 560 x 560 mm
aufspannplattengrosse: 800 x 800 mm
offnungsweg: 450 mm
plate distance max: 970 mm
	

hours of operation: 46.860 h
weight: 10800 kg
	
	
bedinungseinleitung: yes 
	
	
 BATTENFELD BA 2000-1000BK MAKE: BATTENFELD TYPE: BA 2000-1000BK YEAR OF CONSTRUCTION: 1999 MACHINE NUMBER: 54714 CONTROL: B4 LOCATION: KOSZALIN COUNTRY OF ORIGIN: SCANDINAVIA SCREW DIAMETER: 55 MM DISPLACEMENT: 522 CC SHOT WEIGHT: 475 G INJECTION PRESSURE: 1943 BAR CLAMPING FORCE: 2000 KN TIE BAR DISTANCE: 560 X 560 MM AUFSPANNPLATTENGROSSE: 800 X 800 MM OFFNUNGSWEG: 450 MM PLATE DISTANCE MAX: 970 MM HOURS OF OPERATION: 46.860 H WEIGHT: 10800 KG BEDINUNGSEINLEITUNG: YES
Vendedor: TADplast
Año de construcción: usado
Ubicación: Land-reactor (1x), make jongia, type lkp-40, no 87146, new 1987, material stainless steel (316), capacity 650 ltr, vessel sizes dia. 900x1000mm, dished bottom, dished top side, manhole dia. 200mm, top connections (various), outlet, working pressure vac/3 bar, with jacket, working pressure 4,5 bar, max. temperature 100 degr. c., with paddle stirrer, motor 1,5 kw, 220/380-420 volt, speed mixing shaft 39-253 rpm, mounted on legs, floorspace 1,5x1,3 m, total height 2,6 mreactorsreactors > reactors REACTOR (1X), MAKE JONGIA, TYPE LKP-40, NO 87146, NEW 1987, MATERIAL STAINLESS STEEL (316), CAPACITY 650 LTR, VESSEL SIZES DIA. 900X1000MM, DISHED BOTTOM, DISHED TOP SIDE, MANHOLE DIA. 200MM, TOP CONNECTIONS (VARIOUS), OUTLET, WORKING PRESSURE VAC/3 BAR, WITH JACKET, WORKING PRESSURE 4,5 BAR, MAX. TEMPERATURE 100 DEGR. C., WITH PADDLE STIRRER, MOTOR 1,5 KW, 220/380-420 VOLT, SPEED MIXING SHAFT 39-253 RPM, MOUNTED ON LEGS, FLOORSPACE 1,5X1,3 M, TOTAL HEIGHT 2,6 MREACTORSREACTORS > REACTORS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-adast dominant 547 p
year 1998
4 color-4/0, 2/2
size 38 x 52 cm
standard dampening
inkflow-ink and register remote control
in production
good condition
 ADAST DOMINANT 547 P YEAR 1998 4 COLOR-4/0, 2/2 SIZE 38 X 52 CM STANDARD DAMPENING INKFLOW-INK AND REGISTER REMOTE CONTROL IN PRODUCTION GOOD CONDITION
Vendedor: M-Vision
Año de construcción: usado
Ubicación: Land-z-blade mixer (1x), make apv chimie equipement s.a., type m-40 sl, no 3714, new 1990, reconditioned in 2003 by rpa process, material mild steel, capacity 400 ltr, useful capacity 250 ltr, trough sizes 845x700mm, with cover, working pressure vakuum, with jacket, working pressure 4 bar, test pressure 8 bar, single geared, motor 45,0 kw, 380 volt (ex), arm speed ± 15,5/20,0 rpm, hydraulic tilting, with hydraulic unit, motor 1,5 kw, 220-240/380-415 volt (ex), floorspace mixer without drive unit 2,2x1,1 m, total height 1,7 mz-blade mixerskneaders > z-blade mixers Z-BLADE MIXER (1X), MAKE APV CHIMIE EQUIPEMENT S.A., TYPE M-40 SL, NO 3714, NEW 1990, RECONDITIONED IN 2003 BY RPA PROCESS, MATERIAL MILD STEEL, CAPACITY 400 LTR, USEFUL CAPACITY 250 LTR, TROUGH SIZES 845X700MM, WITH COVER, WORKING PRESSURE VAKUUM, WITH JACKET, WORKING PRESSURE 4 BAR, TEST PRESSURE 8 BAR, SINGLE GEARED, MOTOR 45,0 KW, 380 VOLT (EX), ARM SPEED ± 15,5/20,0 RPM, HYDRAULIC TILTING, WITH HYDRAULIC UNIT, MOTOR 1,5 KW, 220-240/380-415 VOLT (EX), FLOORSPACE MIXER WITHOUT DRIVE UNIT 2,2X1,1 M, TOTAL HEIGHT 1,7 MZ-BLADE MIXERSKNEADERS > Z-BLADE MIXERS
Vendedor: Foeth
Año de construcción: usado
Precio: 4.000 GBP
Ubicación: Land-nordson series 3100 hot melt applicator. electric operation 3100v/200-240 ac, designed for high-line speeds. controls melt adhesive flow to setpoint temperatures selected by the operator. system heat rate is 3.6kg/hour. operating temperature range from 70 deg c to 230 deg c (max) with tank capacity of 3714ml/3.6kg. featuring cast-in heaters and integral melting fins, the 3714ml tank provides efficient heat transfer and is ptfe coated for easy cleaning. machine size approx. 595mm x 343mm x 697mm (max height). machine weight 44kg when empty. checked/tested/running NORDSON SERIES 3100 HOT MELT APPLICATOR. ELECTRIC OPERATION 3100V/200-240 AC, DESIGNED FOR HIGH-LINE SPEEDS. CONTROLS MELT ADHESIVE FLOW TO SETPOINT TEMPERATURES SELECTED BY THE OPERATOR. SYSTEM HEAT RATE IS 3.6KG/HOUR. OPERATING TEMPERATURE RANGE FROM 70 DEG C TO 230 DEG C (MAX) WITH TANK CAPACITY OF 3714ML/3.6KG. FEATURING CAST-IN HEATERS AND INTEGRAL MELTING FINS, THE 3714ML TANK PROVIDES EFFICIENT HEAT TRANSFER AND IS PTFE COATED FOR EASY CLEANING. MACHINE SIZE APPROX. 595MM X 343MM X 697MM (MAX HEIGHT). MACHINE WEIGHT 44KG WHEN EMPTY. CHECKED/TESTED/RUNNING
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 650 kg<br/>dimensions (l x w x h) approx.: 1000 x 1100 x 1120 mm<br/>description: motor power 5.50 kw, 4 speeds: 2900/4400/6000/7200 rpm, spindle diameter 50 mm, table size 900 x 1100 mm, working height from the floor 850 mm, sliding table with dimensions 900 x 240 mm, sliding table stroke approx. 510 mm, guides aigner WEIGHT APPROX.: 650 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 1100 X 1120 MM
DESCRIPTION: MOTOR POWER 5.50 KW, 4 SPEEDS: 2900/4400/6000/7200 RPM, SPINDLE DIAMETER 50 MM, TABLE SIZE 900 X 1100 MM, WORKING HEIGHT FROM THE FLOOR 850 MM, SLIDING TABLE WITH DIMENSIONS 900 X 240 MM, SLIDING TABLE STROKE APPROX. 510 MM, GUIDES AIGNER
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 29.500 GBP
Ubicación: Land-noack dpn 760 thermo former for blister pack hot forming only of mouldable films/foils. up to 40 cycles per minute depending on product and packaging size. suitable for packing tablets, capsules, caplets or ampoules. maximum foil width 165mm; maximum feed length 140mm; maximum forming area 150mm x 120mm; maximum forming capacity 5 metres per minute. recommended maximum forming depth 14mm. this machine can form to a maximum depth of 24mm with additional/optional tooling (not included). product feed can be manual or automatic. maximum reel diameter for forming film 600mm and maximum reel diameter for lidding foil is 250mm. power: 8.5-15kw/415v/3 phase/50hz. air pressure: minimum 6 bar to maximum 8 bar. very good condition.  machine size: 3050mm x 750mm x 1650mm high, approx. weight 1000kg. checked/tested/running NOACK DPN 760 THERMO FORMER FOR BLISTER PACK HOT FORMING ONLY OF MOULDABLE FILMS/FOILS. UP TO 40 CYCLES PER MINUTE DEPENDING ON PRODUCT AND PACKAGING SIZE. SUITABLE FOR PACKING TABLETS, CAPSULES, CAPLETS OR AMPOULES. MAXIMUM FOIL WIDTH 165MM; MAXIMUM FEED LENGTH 140MM; MAXIMUM FORMING AREA 150MM X 120MM; MAXIMUM FORMING CAPACITY 5 METRES PER MINUTE. RECOMMENDED MAXIMUM FORMING DEPTH 14MM. THIS MACHINE CAN FORM TO A MAXIMUM DEPTH OF 24MM WITH ADDITIONAL/OPTIONAL TOOLING (NOT INCLUDED). PRODUCT FEED CAN BE MANUAL OR AUTOMATIC. MAXIMUM REEL DIAMETER FOR FORMING FILM 600MM AND MAXIMUM REEL DIAMETER FOR LIDDING FOIL IS 250MM. POWER: 8.5-15KW/415V/3 PHASE/50HZ. AIR PRESSURE: MINIMUM 6 BAR TO MAXIMUM 8 BAR. VERY GOOD CONDITION. MACHINE SIZE: 3050MM X 750MM X 1650MM HIGH, APPROX. WEIGHT 1000KG. CHECKED/TESTED/RUNNING
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Ubicación: Land-pressure: 225 t<br/>chamfer lenght: 4050 mm<br/>distance between columns: 3050 mm<br/>column arm: 300 mm<br/>stroke of ram: 240 mm<br/>distance between table / ram: 370 - 610 mm<br/>feed down: 110 mm/sec<br/>feed bending: 9 mm/sec<br/>feed up: 130 mm/sec<br/>total power requirement: 22 kw<br/>weight of the machine ca.: 16.000 kg<br/>dimensions of the machine ca.: 5850x2200x3100 mm<br/><br/><br/><br/><br/> PRESSURE: 225 T
CHAMFER LENGHT: 4050 MM
DISTANCE BETWEEN COLUMNS: 3050 MM
COLUMN ARM: 300 MM
STROKE OF RAM: 240 MM
DISTANCE BETWEEN TABLE / RAM: 370 - 610 MM
FEED DOWN: 110 MM/SEC
FEED BENDING: 9 MM/SEC
FEED UP: 130 MM/SEC
TOTAL POWER REQUIREMENT: 22 KW
WEIGHT OF THE MACHINE CA.: 16.000 KG
DIMENSIONS OF THE MACHINE CA.: 5850X2200X3100 MM




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 300 x 300 x 250 mm<br/>description: 1 x tesa measuring range 40 to 50 mm, 1 x measuring range 50 to 60 mm, 1 x tesa measuring range 60 to 70 mm, with 2 test rings tesa 50 +4 µ and 70 + 5 µ WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 300 X 250 MM
DESCRIPTION: 1 X TESA MEASURING RANGE 40 TO 50 MM, 1 X MEASURING RANGE 50 TO 60 MM, 1 X TESA MEASURING RANGE 60 TO 70 MM, WITH 2 TEST RINGS TESA 50 +4 µ AND 70 + 5 µ
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ADAST types: