1733 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-there are two identical belt conveyors available, conveying length: 1250mm.  THERE ARE TWO IDENTICAL BELT CONVEYORS AVAILABLE, CONVEYING LENGTH: 1250MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 109.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-year of constr.: 2015
hours of operation machine: 4.889 h (06.02.2019)
number of strokes: 350.732 pcs.
pressing force approx.: 660 kn
bending length approx.: 2040 mm
control: delem t3500t
working height approx.: 1049-1069 mm
free stand round about: 2364 mm
usable height approx: 430 mm
space requirements: 2587 x 1644 x 2370 mm
approximate weight machine: 5,650 kg
total connected load approx.: 15 kva

standard equipment
-closed frame
-press beams
-spherical storage of the press bar with inclined position
-electro-hydraulic top drive
-block hydraulic
-y axis measurement system
-hydraulic oil in the machine (permanent lubrication)
-oil cooler

stop system
befrpjjzks
-trailing stop system 2 axes, x - and r axis
-2 stop fingers

tool clamping
-trumpf top tool clamping point manually
-trumpf substation stuff recording manually crowning
-self-regulating cambering system

control
-intuitive multi touch control, delem t3500t
-integrated trump technology data

security
-standard safety equipment
-foot switch
-ce marking

advanced machine equipment
-2 additional stop finger (860 mm, manually adjustable)
-trumpf quick clamp (segmented
  oberwerkzeugschnellklemmung bending length)
-bendguard - 2 edition console
-3d visualization
-network capable

technical data subject to change - subject to prior sale YEAR OF CONSTR.: 2015 HOURS OF OPERATION MACHINE: 4.889 H (06.02.2019) NUMBER OF STROKES: 350.732 PCS. PRESSING FORCE APPROX.: 660 KN BENDING LENGTH APPROX.: 2040 MM CONTROL: DELEM T3500T WORKING HEIGHT APPROX.: 1049-1069 MM FREE STAND ROUND ABOUT: 2364 MM USABLE HEIGHT APPROX: 430 MM SPACE REQUIREMENTS: 2587 X 1644 X 2370 MM APPROXIMATE WEIGHT MACHINE: 5,650 KG TOTAL CONNECTED LOAD APPROX.: 15 KVA STANDARD EQUIPMENT -CLOSED FRAME -PRESS BEAMS -SPHERICAL STORAGE OF THE PRESS BAR WITH INCLINED POSITION -ELECTRO-HYDRAULIC TOP DRIVE -BLOCK HYDRAULIC -Y AXIS MEASUREMENT SYSTEM -HYDRAULIC OIL IN THE MACHINE (PERMANENT LUBRICATION) -OIL COOLER STOP SYSTEM BEFRPJJZKS -TRAILING STOP SYSTEM 2 AXES, X - AND R AXIS -2 STOP FINGERS TOOL CLAMPING -TRUMPF TOP TOOL CLAMPING POINT MANUALLY -TRUMPF SUBSTATION STUFF RECORDING MANUALLY CROWNING -SELF-REGULATING CAMBERING SYSTEM CONTROL -INTUITIVE MULTI TOUCH CONTROL, DELEM T3500T -INTEGRATED TRUMP TECHNOLOGY DATA SECURITY -STANDARD SAFETY EQUIPMENT -FOOT SWITCH -CE MARKING ADVANCED MACHINE EQUIPMENT -2 ADDITIONAL STOP FINGER (860 MM, MANUALLY ADJUSTABLE) -TRUMPF QUICK CLAMP (SEGMENTED OBERWERKZEUGSCHNELLKLEMMUNG BENDING LENGTH) -BENDGUARD - 2 EDITION CONSOLE -3D VISUALIZATION -NETWORK CAPABLE TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE
Vendedor: mteg GmbH
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-; gross weight [kg]: 7460; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7460; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-used cnc turning and milling center index r 300 ratio line.
control index c200-4 d (siemens 840 d sl);

main and sub spindle:
max. bar passage mm 102;
spindle nose iso 702/1 gr. 8;
3-jaw chuck smw kncs-nb 325-104;
max. speed min-1 3,500;
max. power kw 46;
c-axis degree 0.0001;
stroke z-axis mm 610;
stroke x-axis (counter spindle) 780 mm

tool carrier 1 (upper) and tool carrier 2 (lower) with motor spindle:
stroke y-axis mm +/-140;
b-axis swivel angle degree 270;
tool holder hsk-t63;
max. speed min-1 9,000; driven tool
max. power driven tool kw 24;

tool changer with chain-type magazine for tool carrier 1 and 2:
number of tool stations 2 x 70 piece;
tool holder shank hsk-t63 din 69893;

accessories:
internal loading automation / portal loading system;
workpiece storage with 15 pallets;
general grinding cycles;
extraction system;
chip conveyors;
paper band filter system - coolant pressure 10-80 bar;
  USED CNC TURNING AND MILLING CENTER INDEX R 300 RATIO LINE. CONTROL INDEX C200-4 D (SIEMENS 840 D SL); MAIN AND SUB SPINDLE: MAX. BAR PASSAGE MM 102; SPINDLE NOSE ISO 702/1 GR. 8; 3-JAW CHUCK SMW KNCS-NB 325-104; MAX. SPEED MIN-1 3,500; MAX. POWER KW 46; C-AXIS DEGREE 0.0001; STROKE Z-AXIS MM 610; STROKE X-AXIS (COUNTER SPINDLE) 780 MM TOOL CARRIER 1 (UPPER) AND TOOL CARRIER 2 (LOWER) WITH MOTOR SPINDLE: STROKE Y-AXIS MM +/-140; B-AXIS SWIVEL ANGLE DEGREE 270; TOOL HOLDER HSK-T63; MAX. SPEED MIN-1 9,000; DRIVEN TOOL MAX. POWER DRIVEN TOOL KW 24; TOOL CHANGER WITH CHAIN-TYPE MAGAZINE FOR TOOL CARRIER 1 AND 2: NUMBER OF TOOL STATIONS 2 X 70 PIECE; TOOL HOLDER SHANK HSK-T63 DIN 69893; ACCESSORIES: INTERNAL LOADING AUTOMATION / PORTAL LOADING SYSTEM; WORKPIECE STORAGE WITH 15 PALLETS; GENERAL GRINDING CYCLES; EXTRACTION SYSTEM; CHIP CONVEYORS; PAPER BAND FILTER SYSTEM - COOLANT PRESSURE 10-80 BAR;
Vendedor: GEMATEC GmbH
Año de construcción: usado
Precio: 28.500 €
Ubicación: Land-; gross weight [kg]: 16200; maximum lift capacity [kg]: 227 ; GROSS WEIGHT [KG]: 16200; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 4.750 €
Ubicación: Land-combi steamer

rational scc we 61

scc = selfcookingcenter

gr = whiteefficiency

intelligence meets efficiency: the selfcookingcenter of much more than a professional ovens which knows how to deal with heat and steam is rational: thanks to the innovative four assistants, meals are prepared faster and more accurately. cook will be one experience and the cleaning of the device a breeze. the rational selfcookingcenter 61 (scc 61) is high end in your kitchen.

technical data

dimensions: hxwxd = 167 x 89 x 89 cm
    frequency: 50-60 hz
    voltage: 3nac 400 v
    power: 11,0 kw
    year of construction: 2012

execution:

electric units
    body made of stainless steel
    water connection
    shower for the roll out under the door
    right-hinged door
    inclusive stainless steel base
    includes original instruction manual
    capacity: 6 x 1/1 gn or 12 x 1/2 gn
    operating with live steam from 30 to 130 degrees
    operation with hot air from 30 to 300 degrees
    combination of steam and hot air from 30 to 300 degrees
    eia price approx.: eur 10.995,-

the selfcookingcenter 61 (scc 61) covers 95 percent of all common cooking applications.

the profi - control technology ensures an exact, demand-driven supply of energy.

the integrated self-cleaning technology with automatic descaling ensures hygienic cleanness.

the scc also by unversiertem staff can be easy to use the tft display/touch screen.

the scc 61 protects your operating costs. 

see state & accessories, original images!

if you have questions, email or call.   COMBI STEAMER RATIONAL SCC WE 61 SCC = SELFCOOKINGCENTER GR = WHITEEFFICIENCY INTELLIGENCE MEETS EFFICIENCY: THE SELFCOOKINGCENTER OF MUCH MORE THAN A PROFESSIONAL OVENS WHICH KNOWS HOW TO DEAL WITH HEAT AND STEAM IS RATIONAL: THANKS TO THE INNOVATIVE FOUR ASSISTANTS, MEALS ARE PREPARED FASTER AND MORE ACCURATELY. COOK WILL BE ONE EXPERIENCE AND THE CLEANING OF THE DEVICE A BREEZE. THE RATIONAL SELFCOOKINGCENTER 61 (SCC 61) IS HIGH END IN YOUR KITCHEN. TECHNICAL DATA DIMENSIONS: HXWXD = 167 X 89 X 89 CM FREQUENCY: 50-60 HZ VOLTAGE: 3NAC 400 V POWER: 11,0 KW YEAR OF CONSTRUCTION: 2012 EXECUTION: ELECTRIC UNITS BODY MADE OF STAINLESS STEEL WATER CONNECTION SHOWER FOR THE ROLL OUT UNDER THE DOOR RIGHT-HINGED DOOR INCLUSIVE STAINLESS STEEL BASE INCLUDES ORIGINAL INSTRUCTION MANUAL CAPACITY: 6 X 1/1 GN OR 12 X 1/2 GN OPERATING WITH LIVE STEAM FROM 30 TO 130 DEGREES OPERATION WITH HOT AIR FROM 30 TO 300 DEGREES COMBINATION OF STEAM AND HOT AIR FROM 30 TO 300 DEGREES EIA PRICE APPROX.: EUR 10.995,- THE SELFCOOKINGCENTER 61 (SCC 61) COVERS 95 PERCENT OF ALL COMMON COOKING APPLICATIONS. THE PROFI - CONTROL TECHNOLOGY ENSURES AN EXACT, DEMAND-DRIVEN SUPPLY OF ENERGY. THE INTEGRATED SELF-CLEANING TECHNOLOGY WITH AUTOMATIC DESCALING ENSURES HYGIENIC CLEANNESS. THE SCC ALSO BY UNVERSIERTEM STAFF CAN BE EASY TO USE THE TFT DISPLAY/TOUCH SCREEN. THE SCC 61 PROTECTS YOUR OPERATING COSTS. SEE STATE & ACCESSORIES, ORIGINAL IMAGES! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-; gross weight [kg]: 12260; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 250 ; GROSS WEIGHT [KG]: 12260; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 250
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 189 €
Ubicación: Land-powered roller conveyors

data:
-length: approx. 1980mm
-ges. width: 480mm
-roll width: 420 mm
-roll type: steel roller
-via a belt system connected and powered
-vintage cameras, technically i.o.

-roller conveyors multiple vorhanden--

price:
â?¬189,00 net
â?¬224,91 gross
you will receive an invoice with expelled vat

delivery upon request by us conveniently possible.
 POWERED ROLLER CONVEYORS DATA: -LENGTH: APPROX. 1980MM -GES. WIDTH: 480MM -ROLL WIDTH: 420 MM -ROLL TYPE: STEEL ROLLER -VIA A BELT SYSTEM CONNECTED AND POWERED -VINTAGE CAMERAS, TECHNICALLY I.O. -ROLLER CONVEYORS MULTIPLE VORHANDEN-- PRICE: Â?¬189,00 NET Â?¬224,91 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: 12.900 €
Ubicación: Land-; gross weight [kg]: 11750; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 11750; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-edge sanding machine wegoma
type tb 319
year of construction 1989

engine power 3 kw
sanding belt width 150 mm  
 EDGE SANDING MACHINE WEGOMA TYPE TB 319 YEAR OF CONSTRUCTION 1989 ENGINE POWER 3 KW SANDING BELT WIDTH 150 MM
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Precio: 28.900 €
Ubicación: Land-; gross weight [kg]: 4890; rear tyres remaining: 70; front tyres remaining: 70; maximum lift capacity [kg]: 225 ; GROSS WEIGHT [KG]: 4890; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 70; MAXIMUM LIFT CAPACITY [KG]: 225
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-saw harwi type 625-u built in 1989 cutting height 210 mm maximum cutting height at 45 â° maximum 70 mm cutting length 625 mm height to 50 mm maximum blade diameter 550 mm saw blade hole 30 mm engine power 3 kw weight approx. 220 kg 

 SAW HARWI TYPE 625-U BUILT IN 1989 CUTTING HEIGHT 210 MM MAXIMUM CUTTING HEIGHT AT 45 ° MAXIMUM 70 MM CUTTING LENGTH 625 MM HEIGHT TO 50 MM MAXIMUM BLADE DIAMETER 550 MM SAW BLADE HOLE 30 MM ENGINE POWER 3 KW WEIGHT APPROX. 220 KG
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-; accessories: arbeitsbreite:305, trommelanzahl (4 stck.) ; ACCESSORIES: ARBEITSBREITE:305, TROMMELANZAHL (4 STCK.)
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-noll can line 4 - 1981 - 36,000 cph - 150 & 250 ml slim cans				
#	make	description	oem serial no.	model no.
1	noll	noll 2 depalletizer	812500	
2	noll	empty can conveyor	sen	-
3	noll	can rinser	-	-
4	noll	noll 2 filling machine	3360031	ah-48
5	angelus	noll 2 seamer	10378481	61h
6	noll	noll 2 mixomat	3960229	s - gr - 12  a
7	anton paar	anton paar analyzer	s/n-mpds2000v3 80670100	cobrix 2
8	filtec	filled can rejector	113862, a - 10 - 2.5m-ss	ft-50
9	noll	full can conveyor	sen	-
10	noll	can warmer	781-2431	ds 6000
11	videojet	date coder 10	051081063 wd	videojet 170i
12	khs kister	noll 2 kister packer	80.689	97/40
13	khs kister	shrink tunnel	-	97/40
14	marsh unicorn	tray coder	up0591004	marsh unicorn
15	noll	case conveyor	sen	-
16	noll	noll 2 palletizer	7812500	lord vb 500k
17	cimpack	pallet tag applicator	s/n: gd12 21 8 174	cimpack 300


for full information visit abc.beveragexchange.co.uk
   NOLL CAN LINE 4 - 1981 - 36,000 CPH - 150 & 250 ML SLIM CANS # MAKE DESCRIPTION OEM SERIAL NO. MODEL NO. 1 NOLL NOLL 2 DEPALLETIZER 812500 2 NOLL EMPTY CAN CONVEYOR SEN - 3 NOLL CAN RINSER - - 4 NOLL NOLL 2 FILLING MACHINE 3360031 AH-48 5 ANGELUS NOLL 2 SEAMER 10378481 61H 6 NOLL NOLL 2 MIXOMAT 3960229 S - GR - 12 A 7 ANTON PAAR ANTON PAAR ANALYZER S/N-MPDS2000V3 80670100 COBRIX 2 8 FILTEC FILLED CAN REJECTOR 113862, A - 10 - 2.5M-SS FT-50 9 NOLL FULL CAN CONVEYOR SEN - 10 NOLL CAN WARMER 781-2431 DS 6000 11 VIDEOJET DATE CODER 10 051081063 WD VIDEOJET 170I 12 KHS KISTER NOLL 2 KISTER PACKER 80.689 97/40 13 KHS KISTER SHRINK TUNNEL - 97/40 14 MARSH UNICORN TRAY CODER UP0591004 MARSH UNICORN 15 NOLL CASE CONVEYOR SEN - 16 NOLL NOLL 2 PALLETIZER 7812500 LORD VB 500K 17 CIMPACK PALLET TAG APPLICATOR S/N: GD12 21 8 174 CIMPACK 300 FOR FULL INFORMATION VISIT ABC.BEVERAGEXCHANGE.CO.UK
Vendedor: Pennington (UK) Ltd
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-; accessories: bordcomputer / monitor; working width [cm]: 2100 ; ACCESSORIES: BORDCOMPUTER / MONITOR; WORKING WIDTH [CM]: 2100
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-description
mark system air
model d4-dvv800 k/40
id 7289
status active
€2,500 price + vat
year 2005
location of oradea (ro)

industrial fans to extract smoke, system air dvv800 d4-k/40 in 2005.  maximum flow: 25500 m3/hr, maximum power: 9.5 kw, fuse: 18 a, maximum temperature of air transportability: 1200 c. weight: 172 kg. protection class: ip54 engine housing. rotational speed: 1440 r.p.m. 3 phase current. 5 pieces available and a backup engine. price is per piece.

exworks. price is negotiable and do not include vat. 

contact
tel.: + 359/40-175.575
fax: + 40-259/426.248
mobile: + 40-743/177.040; + 40-740/221.698

watching the product schedule 24 hours prior.

we speak english. wir sprechen deutsch. (+ 40-740/221.698)
hablamos español. beszélünk magyarul. (+ 40 743/177.040)

irrtum und zwischenverkauf vorbehalten, anderungen/
subject to errors, changes and prior to his/
we reserve the right to mistakes, changes and prior sale.

 DESCRIPTION MARK SYSTEM AIR MODEL D4-DVV800 K/40 ID 7289 STATUS ACTIVE €2,500 PRICE + VAT YEAR 2005 LOCATION OF ORADEA (RO) INDUSTRIAL FANS TO EXTRACT SMOKE, SYSTEM AIR DVV800 D4-K/40 IN 2005. MAXIMUM FLOW: 25500 M3/HR, MAXIMUM POWER: 9.5 KW, FUSE: 18 A, MAXIMUM TEMPERATURE OF AIR TRANSPORTABILITY: 1200 C. WEIGHT: 172 KG. PROTECTION CLASS: IP54 ENGINE HOUSING. ROTATIONAL SPEED: 1440 R.P.M. 3 PHASE CURRENT. 5 PIECES AVAILABLE AND A BACKUP ENGINE. PRICE IS PER PIECE. EXWORKS. PRICE IS NEGOTIABLE AND DO NOT INCLUDE VAT. CONTACT TEL.: + 359/40-175.575 FAX: + 40-259/426.248 MOBILE: + 40-743/177.040; + 40-740/221.698 WATCHING THE PRODUCT SCHEDULE 24 HOURS PRIOR. WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+ 40-740/221.698) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+ 40 743/177.040) IRRTUM UND ZWISCHENVERKAUF VORBEHALTEN, ANDERUNGEN/ SUBJECT TO ERRORS, CHANGES AND PRIOR TO HIS/ WE RESERVE THE RIGHT TO MISTAKES, CHANGES AND PRIOR SALE.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-spindle passage: 150 mm<br/>turning diameter over bed: 1220 mm<br/>turning diameter over slide rest: 670 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>control: fanuc oi-td<br/>spindle bore: 150 mm (6) <br/>front & rear 625 mm 4 jaw chucks with 150 mm bore <br/>front & rear turrets <br/>swing over bed: 1220 mm <br/>swing over cross slide: 670 mm <br/>centre height: 625 mm <br/>distance between centres: 3000 mm <br/>width of bed: 610 mm <br/>tailstock center: mt#6 motor: <br/>fanuc 30/37 kw <br/>  <br/>standard accesories- <br/>front and rear chip conveyor with chip cart <br/>auto lubrication system, coolant system <br/>tailstock motorized body move <br/>work light air conditioner of electric cabinet <br/>tailstock quill movement electric manual<br/>manuals<br/>  <br/>additional accessories:- <br/>steady rest: 280 - 550 mm dia.(1 off) <br/>steady rest: 30 - 300 mm dia. (2 off) <br/>transformer <br/>4 jaw chuck: 625 mm (2 off) <br/>front v8 turret, back h6 turret<br/><br/><br/><br/><br/><br/> SPINDLE PASSAGE: 150 MM
TURNING DIAMETER OVER BED: 1220 MM
TURNING DIAMETER OVER SLIDE REST: 670 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CONTROL: FANUC OI-TD
SPINDLE BORE: 150 MM (6)
FRONT & REAR 625 MM 4 JAW CHUCKS WITH 150 MM BORE
FRONT & REAR TURRETS
SWING OVER BED: 1220 MM
SWING OVER CROSS SLIDE: 670 MM
CENTRE HEIGHT: 625 MM
DISTANCE BETWEEN CENTRES: 3000 MM
WIDTH OF BED: 610 MM
TAILSTOCK CENTER: MT#6 MOTOR:
FANUC 30/37 KW

STANDARD ACCESORIES-
FRONT AND REAR CHIP CONVEYOR WITH CHIP CART
AUTO LUBRICATION SYSTEM, COOLANT SYSTEM
TAILSTOCK MOTORIZED BODY MOVE
WORK LIGHT AIR CONDITIONER OF ELECTRIC CABINET
TAILSTOCK QUILL MOVEMENT ELECTRIC MANUAL
MANUALS

ADDITIONAL ACCESSORIES:-
STEADY REST: 280 - 550 MM DIA.(1 OFF)
STEADY REST: 30 - 300 MM DIA. (2 OFF)
TRANSFORMER
4 JAW CHUCK: 625 MM (2 OFF)
FRONT V8 TURRET, BACK H6 TURRET





Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-winterhalter dishwasher gs215
dishwasher; basket size 50 x 50 cm; digital operation and display, 230 volt, abm. wxdxh approx. 60 x 60 x 71 cm WINTERHALTER DISHWASHER GS215 DISHWASHER; BASKET SIZE 50 X 50 CM; DIGITAL OPERATION AND DISPLAY, 230 VOLT, ABM. WXDXH APPROX. 60 X 60 X 71 CM
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 5200 x 2200 x 700 mm<br/>description: chassis number 88036, permitted total weight 3500 kg, box size 5120 x 2120 x 400 mm, plug 7-pole (according to motor vehicle registration certificate), support wheel, wheel shock absorber WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 5200 X 2200 X 700 MM
DESCRIPTION: CHASSIS NUMBER 88036, PERMITTED TOTAL WEIGHT 3500 KG, BOX SIZE 5120 X 2120 X 400 MM, PLUG 7-POLE (ACCORDING TO MOTOR VEHICLE REGISTRATION CERTIFICATE), SUPPORT WHEEL, WHEEL SHOCK ABSORBER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-inomak working cabinet made of stainless steel with sliding doors egs 719
working cabinet made of stainless steel with sliding, adjustable legs, with sliding doors and liner, abm. wxdxh 190 x 70 x 87 cm INOMAK WORKING CABINET MADE OF STAINLESS STEEL WITH SLIDING DOORS EGS 719 WORKING CABINET MADE OF STAINLESS STEEL WITH SLIDING, ADJUSTABLE LEGS, WITH SLIDING DOORS AND LINER, ABM. WXDXH 190 X 70 X 87 CM
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 1800 x 800 x 1200 mm<br/>description: coolant r134a nominal power 2,6kw WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 1800 X 800 X 1200 MM
DESCRIPTION: COOLANT R134A NOMINAL POWER 2,6KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-carso & aaby-staal p40 portionieren machine
portioning machine, wheels, dimensions 48 x 55 x 11 CARSO & AABY-STAAL P40 PORTIONIEREN MACHINE PORTIONING MACHINE, WHEELS, DIMENSIONS 48 X 55 X 11
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-sheet width:2000 mm<br/>plate length:1300 mm<br/>plate thickness:7 mm<br/>table-size:1300 x 2000 mm<br/>pressure:7,5 t<br/>punch diameter:max. 50 mm<br/>length of stroke min./max.:6,5 - 12,5 mm<br/>no. of strokes:330 - 1600  hub/min<br/>weight:3,2 t<br/>dimensions (l/w/h):3600x2700x2100 mm<br/><br/>accessories:  table some accessories manuals SHEET WIDTH:2000 MM
PLATE LENGTH:1300 MM
PLATE THICKNESS:7 MM
TABLE-SIZE:1300 X 2000 MM
PRESSURE:7,5 T
PUNCH DIAMETER:MAX. 50 MM
LENGTH OF STROKE MIN./MAX.:6,5 - 12,5 MM
NO. OF STROKES:330 - 1600 HUB/MIN
WEIGHT:3,2 T
DIMENSIONS (L/W/H):3600X2700X2100 MM

ACCESSORIES: TABLE SOME ACCESSORIES MANUALS
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-1 stk. melior ganda meat mixer
meat mixer, movable, tilting container, 400 volt, abm. wxdxh approx. 75 x 95 x 107 cm 1 STK. MELIOR GANDA MEAT MIXER MEAT MIXER, MOVABLE, TILTING CONTAINER, 400 VOLT, ABM. WXDXH APPROX. 75 X 95 X 107 CM
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-frame + working plate stainless steel\r\ndimension: l 232, w 71,5, h 89 cm FRAME + WORKING PLATE STAINLESS STEEL\R\NDIMENSION: L 232, W 71,5, H 89 CM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-1 stk. kuppersbusch electric cooking facilities
electric cooking line with: induction wok including wok pan, frying pan, double deep fryer, including baskets and lids, stainless steel cabinet with sliding doors, wok 230 v, 400 v griddle/fryer, abm. wxdxh approx. 300 x 75 x 90 cm 1 STK. KUPPERSBUSCH ELECTRIC COOKING FACILITIES ELECTRIC COOKING LINE WITH: INDUCTION WOK INCLUDING WOK PAN, FRYING PAN, DOUBLE DEEP FRYER, INCLUDING BASKETS AND LIDS, STAINLESS STEEL CABINET WITH SLIDING DOORS, WOK 230 V, 400 V GRIDDLE/FRYER, ABM. WXDXH APPROX. 300 X 75 X 90 CM
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-stainless steel , moveable, turning system\r\ndimension: inside      884 x 724 x 130 mm\r\n               outside  1050/1930 x 890 x 1220 mm\r\ncontains approx. 50 kg fat, cap. approx. 480 - 576 donuts/h\r\naccessories:   turning system for berliner/donuts\r\n STAINLESS STEEL , MOVEABLE, TURNING SYSTEM\R\NDIMENSION: INSIDE 884 X 724 X 130 MM\R\N OUTSIDE 1050/1930 X 890 X 1220 MM\R\NCONTAINS APPROX. 50 KG FAT, CAP. APPROX. 480 - 576 DONUTS/H\R\NACCESSORIES: TURNING SYSTEM FOR BERLINER/DONUTS\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-rocking grate, grill, stable design, round stainless steel, high quality, easy removable grate, diameter 120 cm, 5/6 mm thick rust, bottled gas, propane, total size 140 cm, 220 cm high ROCKING GRATE, GRILL, STABLE DESIGN, ROUND STAINLESS STEEL, HIGH QUALITY, EASY REMOVABLE GRATE, DIAMETER 120 CM, 5/6 MM THICK RUST, BOTTLED GAS, PROPANE, TOTAL SIZE 140 CM, 220 CM HIGH
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-cap. max. 6000 pcs./h\r\ndoughweightrange ca. 40 - 90 g\r\n CAP. MAX. 6000 PCS./H\R\NDOUGHWEIGHTRANGE CA. 40 - 90 G\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-year of construction: 1989 elapsed. operating hour: 9000 performance: 95kw drive type: diesel, 6 cylinder weight: 12 tons of color: yellow facilities: four-wheel drive, bucket volume 2 sqm tyres: 50% documentation: licence of types of available key: 1 comments on the state: expressly indicated that no complete inventory and check the functionality of the auction object performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions of auction. YEAR OF CONSTRUCTION: 1989 ELAPSED. OPERATING HOUR: 9000 PERFORMANCE: 95KW DRIVE TYPE: DIESEL, 6 CYLINDER WEIGHT: 12 TONS OF COLOR: YELLOW FACILITIES: FOUR-WHEEL DRIVE, BUCKET VOLUME 2 SQM TYRES: 50% DOCUMENTATION: LICENCE OF TYPES OF AVAILABLE KEY: 1 COMMENTS ON THE STATE: EXPRESSLY INDICATED THAT NO COMPLETE INVENTORY AND CHECK THE FUNCTIONALITY OF THE AUCTION OBJECT PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS OF AUCTION.
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-5 rows, cap. max. 8.200 pcs./h, model 1989/1990,\r\ninclude  \r\ndivider + rounder, type mus - g 5, model 1998\r\n   doughweightrange max. 150 g\r\n    include moulding drum 74 -85 g\r\nintermediate proofer, type zgl5/273/360,\r\n    proofing time approx.10 min.\r\nstamping unit, type fst 5/50\r\nfinal proofer type sg 0,6/1010/950,\r\n    proofing time approx.35 min.\r\nairconditioning\r\ndepositing device, width 600 mm, max. length 800 mm 5 ROWS, CAP. MAX. 8.200 PCS./H, MODEL 1989/1990,\R\NINCLUDE \R\NDIVIDER + ROUNDER, TYPE MUS - G 5, MODEL 1998\R\N DOUGHWEIGHTRANGE MAX. 150 G\R\N INCLUDE MOULDING DRUM 74 -85 G\R\NINTERMEDIATE PROOFER, TYPE ZGL5/273/360,\R\N PROOFING TIME APPROX.10 MIN.\R\NSTAMPING UNIT, TYPE FST 5/50\R\NFINAL PROOFER TYPE SG 0,6/1010/950,\R\N PROOFING TIME APPROX.35 MIN.\R\NAIRCONDITIONING\R\NDEPOSITING DEVICE, WIDTH 600 MM, MAX. LENGTH 800 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-combined mercerizing and washing line  made of :
 
   pozzi 36 cylinder mercerizing, roller width 1800 mm, yoc  1989. with  1 washing unit babcock 2000 mm roller width yoc 1995 with elcetrical cabinet completely renewed in 2011 with siemens control.

   washing line made of 3 washing unit babcock model traflotex with intermediate padders ,  roller width 2000 mm yoc 1980 COMBINED MERCERIZING AND WASHING LINE MADE OF : POZZI 36 CYLINDER MERCERIZING, ROLLER WIDTH 1800 MM, YOC 1989. WITH 1 WASHING UNIT BABCOCK 2000 MM ROLLER WIDTH YOC 1995 WITH ELCETRICAL CABINET COMPLETELY RENEWED IN 2011 WITH SIEMENS CONTROL. WASHING LINE MADE OF 3 WASHING UNIT BABCOCK MODEL TRAFLOTEX WITH INTERMEDIATE PADDERS , ROLLER WIDTH 2000 MM YOC 1980
Vendedor: Inautex
Año de construcción: usado
Ubicación: Land-working width adjustable - max. 700 mm\r\nflour quantity adjustable through side guides WORKING WIDTH ADJUSTABLE - MAX. 700 MM\R\NFLOUR QUANTITY ADJUSTABLE THROUGH SIDE GUIDES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-no. 04121

ott veneer press stable 2511 / 80

1989, very good condition

dimensions 2500 x 1100 mm
as good as new, absolutely scratch-free gold-anodized elkom plates button controls for machine. up down stop
automatic pressure adjustment
limit switch for opening anywhere
emergency stop pull cord
opening width 400 mm
4 pressure cylinder diameter 90 mm
total pressure 80 to
spec. press pressure 3.0 4.0 kg / cm2
table extension panels on both sides
pull-out material support on the right side
with original manual

external dimensions: 2960 x 1250 x 1900 mm, weight: 3500 kg

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

delivery: from stock our general terms and conditions apply, see in the   NO. 04121 OTT VENEER PRESS STABLE 2511 / 80 1989, VERY GOOD CONDITION DIMENSIONS 2500 X 1100 MM AS GOOD AS NEW, ABSOLUTELY SCRATCH-FREE GOLD-ANODIZED ELKOM PLATES BUTTON CONTROLS FOR MACHINE. UP DOWN STOP AUTOMATIC PRESSURE ADJUSTMENT LIMIT SWITCH FOR OPENING ANYWHERE EMERGENCY STOP PULL CORD OPENING WIDTH 400 MM 4 PRESSURE CYLINDER DIAMETER 90 MM TOTAL PRESSURE 80 TO SPEC. PRESS PRESSURE 3.0 4.0 KG / CM2 TABLE EXTENSION PANELS ON BOTH SIDES PULL-OUT MATERIAL SUPPORT ON THE RIGHT SIDE WITH ORIGINAL MANUAL EXTERNAL DIMENSIONS: 2960 X 1250 X 1900 MM, WEIGHT: 3500 KG USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE DELIVERY: FROM STOCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-48 berliner/donuts\r\nstainless steel , moveable, turning system\r\ndimension: inside   890 x 725 x 130 mm\r\n               outside  950/ 2150 with dropping plate x 780 x 680/940 mm with table\r\ncontains approx. 50 kg fat, cap. approx. 480 - 576 donuts/h\r\naccessories: 1 turning system for berliner/donuts\r\n                   1 dropping screen\r\n                   1 dropping plate, 1 lid\r\n 48 BERLINER/DONUTS\R\NSTAINLESS STEEL , MOVEABLE, TURNING SYSTEM\R\NDIMENSION: INSIDE 890 X 725 X 130 MM\R\N OUTSIDE 950/ 2150 WITH DROPPING PLATE X 780 X 680/940 MM WITH TABLE\R\NCONTAINS APPROX. 50 KG FAT, CAP. APPROX. 480 - 576 DONUTS/H\R\NACCESSORIES: 1 TURNING SYSTEM FOR BERLINER/DONUTS\R\N 1 DROPPING SCREEN\R\N 1 DROPPING PLATE, 1 LID\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-sheet fed sos bag making machine without handle unit

mfgr     : newlong
model    : 345t
mfg year : 1989
status : used / to be under operation upto spring 2019

size range
sheet width : 830 – 1250 mm
sheet length : 450 – 800 mm
basic weight (gsm) : 100 – 140 gsm

bag width : 300 – 450 mm
bottom width : 100 – 220 mm
bag length : 370 – 650 mm

a creasing line can be applied at bottom forming section so that top of the bag can be folded inside manually later.

all machine or equipment is offered as is where is with all faults without warranty and is subject to prior sales.

all information provided in this offer is from the source(s), which is/are deemed reliable and trusted.
 SHEET FED SOS BAG MAKING MACHINE WITHOUT HANDLE UNIT MFGR : NEWLONG MODEL : 345T MFG YEAR : 1989 STATUS : USED / TO BE UNDER OPERATION UPTO SPRING 2019 SIZE RANGE SHEET WIDTH : 830 – 1250 MM SHEET LENGTH : 450 – 800 MM BASIC WEIGHT (GSM) : 100 – 140 GSM BAG WIDTH : 300 – 450 MM BOTTOM WIDTH : 100 – 220 MM BAG LENGTH : 370 – 650 MM A CREASING LINE CAN BE APPLIED AT BOTTOM FORMING SECTION SO THAT TOP OF THE BAG CAN BE FOLDED INSIDE MANUALLY LATER. ALL MACHINE OR EQUIPMENT IS OFFERED AS IS WHERE IS WITH ALL FAULTS WITHOUT WARRANTY AND IS SUBJECT TO PRIOR SALES. ALL INFORMATION PROVIDED IN THIS OFFER IS FROM THE SOURCE(S), WHICH IS/ARE DEEMED RELIABLE AND TRUSTED.
Vendedor: A-Pac
Año de construcción: usado
Ubicación: Land-computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 780 mm COMPUTER CONTROL, BAKING-CHAMBER FOR 1 RACK\R\NROTATING RACK, FOR PLATES 580 X 780 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 1.190 €
Ubicación: Land-gluing machine omma ftf. 1300.2 m

4-roller machine
job width 1300 mm
built in 1987
face approx. 1200 kg
l x w x h: 2.5 x 1.0 x 1.8 m

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      
 

  

 GLUING MACHINE OMMA FTF. 1300.2 M 4-ROLLER MACHINE JOB WIDTH 1300 MM BUILT IN 1987 FACE APPROX. 1200 KG L X W X H: 2.5 X 1.0 X 1.8 M THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 780 mm COMPUTER CONTROL, BAKING-CHAMBER FOR 1 RACK\R\NROTATING RACK, FOR PLATES 580 X 780 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-data:

-year of construction: 2009
-serial number: 8908 2-21
-with stop table

price on request

images are of a comparable machine DATA: -YEAR OF CONSTRUCTION: 2009 -SERIAL NUMBER: 8908 2-21 -WITH STOP TABLE PRICE ON REQUEST IMAGES ARE OF A COMPARABLE MACHINE
Vendedor: Mirrotech Glas & Spiegel GmbH
Año de construcción: usado
Ubicación: Land-computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 780 mm, complete assembled loaded COMPUTER CONTROL, BAKING-CHAMBER FOR 1 RACK\R\NROTATING RACK, FOR PLATES 580 X 780 MM, COMPLETE ASSEMBLED LOADED
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-upgrade welding machine, second-hand / used, automatic welding submerged-arc
â 
year / year: 1990
manufacturer / make: esab gmbh
type / model: a6 sfd1
â 
â 
work area / operation space
vertical / vertical 5200 mm
horizontal / horizontal: 4000 mm
rotary motion of the mast / rotational movement of the column 360âº

technical data
supply voltage: 24-44 v
power consumption / connected load: 75 kw
control / control: dowsing / pendulum
permissible load / loading: ws/gs 60%: 1000 a
welding wire diameter, solid simple wire / welding wire: 1.6 â?? 4.0 mm
wire feed speed / wire / wire feed: 0.5-9 m / min
schweiã?geschwindigkeitwelding speed: 15-290 cm / min
transport speed desschienenwagens / railcar speed: 2.9 m / min
maximum permissible load at jib end / max load at arm end: 3240 n
maximum permitted torque bracket / maximum torque of beam: 18950 nm
â 
â 
accessories
â 
welding / welding head ld d20
welding power source / 1250 welding source lae UPGRADE WELDING MACHINE, SECOND-HAND / USED, AUTOMATIC WELDING SUBMERGED-ARC &ACIRC;&NBSP; YEAR / YEAR: 1990 MANUFACTURER / MAKE: ESAB GMBH TYPE / MODEL: A6 SFD1 &ACIRC;&NBSP; &ACIRC;&NBSP; WORK AREA / OPERATION SPACE VERTICAL / VERTICAL 5200 MM HORIZONTAL / HORIZONTAL: 4000 MM ROTARY MOTION OF THE MAST / ROTATIONAL MOVEMENT OF THE COLUMN 360&ACIRC;&ORDM; TECHNICAL DATA SUPPLY VOLTAGE: 24-44 V POWER CONSUMPTION / CONNECTED LOAD: 75 KW CONTROL / CONTROL: DOWSING / PENDULUM PERMISSIBLE LOAD / LOADING: WS/GS 60%: 1000 A WELDING WIRE DIAMETER, SOLID SIMPLE WIRE / WELDING WIRE: 1.6 &ACIRC;?? 4.0 MM WIRE FEED SPEED / WIRE / WIRE FEED: 0.5-9 M / MIN SCHWEI&ATILDE;?GESCHWINDIGKEITWELDING SPEED: 15-290 CM / MIN TRANSPORT SPEED DESSCHIENENWAGENS / RAILCAR SPEED: 2.9 M / MIN MAXIMUM PERMISSIBLE LOAD AT JIB END / MAX LOAD AT ARM END: 3240 N MAXIMUM PERMITTED TORQUE BRACKET / MAXIMUM TORQUE OF BEAM: 18950 NM &ACIRC;&NBSP; &ACIRC;&NBSP; ACCESSORIES &ACIRC;&NBSP; WELDING / WELDING HEAD LD D20 WELDING POWER SOURCE / 1250 WELDING SOURCE LAE
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-type fg, model 260  1000 e, stainless steel\r\nfor continous frying with turning system, \r\nsmall storage tank with level-measurement\r\npower  400 v, 50 cycles, 50 kw TYPE FG, MODEL 260 1000 E, STAINLESS STEEL\R\NFOR CONTINOUS FRYING WITH TURNING SYSTEM, \R\NSMALL STORAGE TANK WITH LEVEL-MEASUREMENT\R\NPOWER 400 V, 50 CYCLES, 50 KW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-long cutting saw / miter saw, used
fabr.: separating hunter type: lpc 110/400
year / year: 1989
saw blade diameter / diameter of circular blade: 360 mm
cutting area: rectangular: 110-400 mm round / round110 mm flat / flat 400 mm cutting angle / cutting angle:... 90 â°
cutting speed / cutting speed: 6 speeds:
                                                16/32 20/40 / 25/50 m / min motor pole shift bar / drive: 1500/3000 rpm. 
                                                 1.5 / 2 kw dimensions 1170 x 1210 x 1480 mm weight approx. 900 kg specification: with roller / with roller feeder LONG CUTTING SAW / MITER SAW, USED FABR.: SEPARATING HUNTER TYPE: LPC 110/400 YEAR / YEAR: 1989 SAW BLADE DIAMETER / DIAMETER OF CIRCULAR BLADE: 360 MM CUTTING AREA: RECTANGULAR: 110-400 MM ROUND / ROUND110 MM FLAT / FLAT 400 MM CUTTING ANGLE / CUTTING ANGLE:... 90 &ACIRC;&DEG; CUTTING SPEED / CUTTING SPEED: 6 SPEEDS: 16/32 20/40 / 25/50 M / MIN MOTOR POLE SHIFT BAR / DRIVE: 1500/3000 RPM. 1.5 / 2 KW DIMENSIONS 1170 X 1210 X 1480 MM WEIGHT APPROX. 900 KG SPECIFICATION: WITH ROLLER / WITH ROLLER FEEDER
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-for the production of fine ice \r\ncabinet: stainless steel\r\ncapacity approx. 250 kg ice within 24 h\r\nat 20°c ambient & 15°c water\r\nelectricity: 230v-1-50hz (other on request)\r\nrefrigerant: r404a FOR THE PRODUCTION OF FINE ICE \R\NCABINET: STAINLESS STEEL\R\NCAPACITY APPROX. 250 KG ICE WITHIN 24 H\R\NAT 20°C AMBIENT & 15°C WATER\R\NELECTRICITY: 230V-1-50HZ (OTHER ON REQUEST)\R\NREFRIGERANT: R404A
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-no. 04045

sale in the sales order from site cnc machining centre for door production reichenbacher iii vision t fischertech

used, year 2011
available from april 2018

the vision is a numerically controlled machining centre for machining wood and plastic parts, as well as parts from composite materials processing. it is designed as routers in a bridges portal design and allows the fully automatic milling, to milling and profile milling.

drilling and insertion station for door hinges
vibration conveyors with supply unit for door hinges
combination sword brush on the outlet side
cnc control siemens sinumerik 840 d solution line, with ncu 720.2
fischertech facilities
kuka robots with linear axis
ausrichte - and turning station for workpieces numerically controlled linear motion in the nc axes:
 
x 1 / x 2-axle movement of the bridge portal on the bed 7,880 mm (longitudinal movement *)

y1 axis movement of the transversal carriage on the portal (working stroke) 2,200 mm (cross movement) * working unit 1

y2-axis movement of the transversal carriage on the portal (working stroke) 2,200 mm (cross movement) * working unit 2

z1 axis movement of the vertical slide in the portal 380 mm vertical movement.
 work unit 1

z2 axis movement of the vertical slide in the portal 380 mm vertical movement.
working unit 2

v1 axis movement of the table bar (machine table, left) 1,150 mm.
(cross movement) *.

v12 axis movement of the table bar (machine table right) 1,150 mm (cross movement) *.

x 3-axis movement of the carriage of the tape cartridge drive 7,880 mm longitudinal movement * l

wwy1-achse movement of the carriage of the double hook (submit) transverse movement *)
wwy2-achse movement of the carriage of the double hook (submit) transverse movement) *.

*) reference: perpendicular to the direction of operating table longitudinal

numerically controlled rotary movements:

b11 - axis 45 â° to the x-y plane +/-180 degrees rotation of the cutting unit 1
b12-axis 45 â° to the x-y plane + /.180 degrees rotation of the milling unit 2
b-axis 00 insertion movement of the band union station
c11-axis in the x-y plane + / _ 360-degree rotation around the axis 21
c12-axis in the x-y plane + / _ 360 degrees rotation to the 22 axis
wwc1 in x-y plane rotation of the double hook 1 (left)
wwc2 in x-y plane rotation of the double gripper 2 (right)
ww-axis in the x-y plane 00 motion of the tool magazine

work units 1 and 2:
rated power: 15,0 kw at 1 24,000 min â·
power s1 constant in the speed range approx. 12,000 min-1... 24,000 min-1
performance under about 9.800 min-1 - proportional to the speed
speed 500... 24,000 min â· of 1, about program preselected
right / left rotation program preselected
the spindle is automatically braked when turned off

drive: rf spindle powered by frequency converter
water cooling with cooling unit, hybrid bearings
air barrier on the work side of the spindle prevents the ingress of dirt particles in the spindle
	
spindle lubrication: grease lubrication, no further lubrication during the lifetime required

clamping system: automatic tensioning system with mechanical tool clamping toughened plate spring package
tool changing due to spring relaxation by means of a pneumatic cylinder
automatic taper cleaning with compressed air

spindle taper: taper hollow hsk 63 according to din 69893 form f, with circumferential groove

tool length: 240 mm, from plan flat tool holder
tool diameter: max 0 200 mm (additional units and saw blades 300 mm)
set tool dimensions: max 6 kg

optional vibration monitoring system (ifm fa.)

tool magazine for 40 seats
tool holder identical on the milling spindle
tool gripper: spring tension clamp gripper
centre distance of tools: 80 mm
flying circle at additional heads of max 250 mm, possibly can be not occupied neighbouring seats
werkzeuglange: max 240 mm, from plan flat tool holder
tool diameter: according to the available space of to 0200 mm
set tool dimensions: max 6 kg for a single tool place, 160 kg for the entire tool magazine

feed drives:
feed speed continuously programmable
v-axis ball screw
with upstream toothed belt drive up to 20 m / min
x 1 / x 2-axle and pinion drive up to 60 m / min
x 3-axis pinion drive-
y-axis rack and pinion drive up to 90 m / min
z axes ball screw drive with upstream toothed belt drive up to 20 m / min
8-axis helical gear units up to 90 â° / sec
811/812-axis helical gear units up to 90 â° / sec
c-axis helical gear units up to 90 â° / sec
ww-axis helical gears-
wwc-axis helical gears-
vvwy-axis helical -.
roller conveyor (outlet side) chain - drive
conveyor belts spur gears-

compressed air central lubrication system

machine table
construction: pin table with adjustable cross back
table layout: 2 clamping stations, for reciprocal loading,.
geometry: free height between grid table and the bottom of the portal about 220 mm when extended vacuum cleaners
workspace: when editing with two aggregates and quick change maximum 2,200 mm x 1 500 mm â· * l
when editing with an aggregate approximately 3,000 mm x 1.500mm * l
for manual loading and editing with an aggregate 4.000 mm x 1 600mm â· i

pneumatically retractable stops in all directions, with sensors
workpiece clamping via 4 x 36 = 144 piece vacuum cleaners
lift of the vacuum cleaner suction diameter of 150 mm, 500 mm

dimensions of the system: 11,00 m length + drilling station (5 m length) depth 12,00 m heavy equipment machinery and equipment without further warranty.
technical data according to the manufacturer, no guarantee!

subject to prior sale, on behalf of the customer

terms of delivery: from location close to 73433 aalen

our general terms and conditions apply, see in the  
 NO. 04045 SALE IN THE SALES ORDER FROM SITE CNC MACHINING CENTRE FOR DOOR PRODUCTION REICHENBACHER III VISION T FISCHERTECH USED, YEAR 2011 AVAILABLE FROM APRIL 2018 THE VISION IS A NUMERICALLY CONTROLLED MACHINING CENTRE FOR MACHINING WOOD AND PLASTIC PARTS, AS WELL AS PARTS FROM COMPOSITE MATERIALS PROCESSING. IT IS DESIGNED AS ROUTERS IN A BRIDGES PORTAL DESIGN AND ALLOWS THE FULLY AUTOMATIC MILLING, TO MILLING AND PROFILE MILLING. DRILLING AND INSERTION STATION FOR DOOR HINGES VIBRATION CONVEYORS WITH SUPPLY UNIT FOR DOOR HINGES COMBINATION SWORD BRUSH ON THE OUTLET SIDE CNC CONTROL SIEMENS SINUMERIK 840 D SOLUTION LINE, WITH NCU 720.2 FISCHERTECH FACILITIES KUKA ROBOTS WITH LINEAR AXIS AUSRICHTE - AND TURNING STATION FOR WORKPIECES NUMERICALLY CONTROLLED LINEAR MOTION IN THE NC AXES: X 1 / X 2-AXLE MOVEMENT OF THE BRIDGE PORTAL ON THE BED 7,880 MM (LONGITUDINAL MOVEMENT *) Y1 AXIS MOVEMENT OF THE TRANSVERSAL CARRIAGE ON THE PORTAL (WORKING STROKE) 2,200 MM (CROSS MOVEMENT) * WORKING UNIT 1 Y2-AXIS MOVEMENT OF THE TRANSVERSAL CARRIAGE ON THE PORTAL (WORKING STROKE) 2,200 MM (CROSS MOVEMENT) * WORKING UNIT 2 Z1 AXIS MOVEMENT OF THE VERTICAL SLIDE IN THE PORTAL 380 MM VERTICAL MOVEMENT. WORK UNIT 1 Z2 AXIS MOVEMENT OF THE VERTICAL SLIDE IN THE PORTAL 380 MM VERTICAL MOVEMENT. WORKING UNIT 2 V1 AXIS MOVEMENT OF THE TABLE BAR (MACHINE TABLE, LEFT) 1,150 MM. (CROSS MOVEMENT) *. V12 AXIS MOVEMENT OF THE TABLE BAR (MACHINE TABLE RIGHT) 1,150 MM (CROSS MOVEMENT) *. X 3-AXIS MOVEMENT OF THE CARRIAGE OF THE TAPE CARTRIDGE DRIVE 7,880 MM LONGITUDINAL MOVEMENT * L WWY1-ACHSE MOVEMENT OF THE CARRIAGE OF THE DOUBLE HOOK (SUBMIT) TRANSVERSE MOVEMENT *) WWY2-ACHSE MOVEMENT OF THE CARRIAGE OF THE DOUBLE HOOK (SUBMIT) TRANSVERSE MOVEMENT) *. *) REFERENCE: PERPENDICULAR TO THE DIRECTION OF OPERATING TABLE LONGITUDINAL NUMERICALLY CONTROLLED ROTARY MOVEMENTS: B11 - AXIS 45 &ACIRC;&DEG; TO THE X-Y PLANE +/-180 DEGREES ROTATION OF THE CUTTING UNIT 1 B12-AXIS 45 &ACIRC;&DEG; TO THE X-Y PLANE + /.180 DEGREES ROTATION OF THE MILLING UNIT 2 B-AXIS 00 INSERTION MOVEMENT OF THE BAND UNION STATION C11-AXIS IN THE X-Y PLANE + / _ 360-DEGREE ROTATION AROUND THE AXIS 21 C12-AXIS IN THE X-Y PLANE + / _ 360 DEGREES ROTATION TO THE 22 AXIS WWC1 IN X-Y PLANE ROTATION OF THE DOUBLE HOOK 1 (LEFT) WWC2 IN X-Y PLANE ROTATION OF THE DOUBLE GRIPPER 2 (RIGHT) WW-AXIS IN THE X-Y PLANE 00 MOTION OF THE TOOL MAGAZINE WORK UNITS 1 AND 2: RATED POWER: 15,0 KW AT 1 24,000 MIN &ACIRC;&MIDDOT; POWER S1 CONSTANT IN THE SPEED RANGE APPROX. 12,000 MIN-1... 24,000 MIN-1 PERFORMANCE UNDER ABOUT 9.800 MIN-1 - PROPORTIONAL TO THE SPEED SPEED 500... 24,000 MIN &ACIRC;&MIDDOT; OF 1, ABOUT PROGRAM PRESELECTED RIGHT / LEFT ROTATION PROGRAM PRESELECTED THE SPINDLE IS AUTOMATICALLY BRAKED WHEN TURNED OFF DRIVE: RF SPINDLE POWERED BY FREQUENCY CONVERTER WATER COOLING WITH COOLING UNIT, HYBRID BEARINGS AIR BARRIER ON THE WORK SIDE OF THE SPINDLE PREVENTS THE INGRESS OF DIRT PARTICLES IN THE SPINDLE SPINDLE LUBRICATION: GREASE LUBRICATION, NO FURTHER LUBRICATION DURING THE LIFETIME REQUIRED CLAMPING SYSTEM: AUTOMATIC TENSIONING SYSTEM WITH MECHANICAL TOOL CLAMPING TOUGHENED PLATE SPRING PACKAGE TOOL CHANGING DUE TO SPRING RELAXATION BY MEANS OF A PNEUMATIC CYLINDER AUTOMATIC TAPER CLEANING WITH COMPRESSED AIR SPINDLE TAPER: TAPER HOLLOW HSK 63 ACCORDING TO DIN 69893 FORM F, WITH CIRCUMFERENTIAL GROOVE TOOL LENGTH: 240 MM, FROM PLAN FLAT TOOL HOLDER TOOL DIAMETER: MAX 0 200 MM (ADDITIONAL UNITS AND SAW BLADES 300 MM) SET TOOL DIMENSIONS: MAX 6 KG OPTIONAL VIBRATION MONITORING SYSTEM (IFM FA.) TOOL MAGAZINE FOR 40 SEATS TOOL HOLDER IDENTICAL ON THE MILLING SPINDLE TOOL GRIPPER: SPRING TENSION CLAMP GRIPPER CENTRE DISTANCE OF TOOLS: 80 MM FLYING CIRCLE AT ADDITIONAL HEADS OF MAX 250 MM, POSSIBLY CAN BE NOT OCCUPIED NEIGHBOURING SEATS WERKZEUGLANGE: MAX 240 MM, FROM PLAN FLAT TOOL HOLDER TOOL DIAMETER: ACCORDING TO THE AVAILABLE SPACE OF TO 0200 MM SET TOOL DIMENSIONS: MAX 6 KG FOR A SINGLE TOOL PLACE, 160 KG FOR THE ENTIRE TOOL MAGAZINE FEED DRIVES: FEED SPEED CONTINUOUSLY PROGRAMMABLE V-AXIS BALL SCREW WITH UPSTREAM TOOTHED BELT DRIVE UP TO 20 M / MIN X 1 / X 2-AXLE AND PINION DRIVE UP TO 60 M / MIN X 3-AXIS PINION DRIVE- Y-AXIS RACK AND PINION DRIVE UP TO 90 M / MIN Z AXES BALL SCREW DRIVE WITH UPSTREAM TOOTHED BELT DRIVE UP TO 20 M / MIN 8-AXIS HELICAL GEAR UNITS UP TO 90 &ACIRC;&DEG; / SEC 811/812-AXIS HELICAL GEAR UNITS UP TO 90 &ACIRC;&DEG; / SEC C-AXIS HELICAL GEAR UNITS UP TO 90 &ACIRC;&DEG; / SEC WW-AXIS HELICAL GEARS- WWC-AXIS HELICAL GEARS- VVWY-AXIS HELICAL -. ROLLER CONVEYOR (OUTLET SIDE) CHAIN - DRIVE CONVEYOR BELTS SPUR GEARS- COMPRESSED AIR CENTRAL LUBRICATION SYSTEM MACHINE TABLE CONSTRUCTION: PIN TABLE WITH ADJUSTABLE CROSS BACK TABLE LAYOUT: 2 CLAMPING STATIONS, FOR RECIPROCAL LOADING,. GEOMETRY: FREE HEIGHT BETWEEN GRID TABLE AND THE BOTTOM OF THE PORTAL ABOUT 220 MM WHEN EXTENDED VACUUM CLEANERS WORKSPACE: WHEN EDITING WITH TWO AGGREGATES AND QUICK CHANGE MAXIMUM 2,200 MM X 1 500 MM &ACIRC;&MIDDOT; * L WHEN EDITING WITH AN AGGREGATE APPROXIMATELY 3,000 MM X 1.500MM * L FOR MANUAL LOADING AND EDITING WITH AN AGGREGATE 4.000 MM X 1 600MM &ACIRC;&MIDDOT; I PNEUMATICALLY RETRACTABLE STOPS IN ALL DIRECTIONS, WITH SENSORS WORKPIECE CLAMPING VIA 4 X 36 = 144 PIECE VACUUM CLEANERS LIFT OF THE VACUUM CLEANER SUCTION DIAMETER OF 150 MM, 500 MM DIMENSIONS OF THE SYSTEM: 11,00 M LENGTH + DRILLING STATION (5 M LENGTH) DEPTH 12,00 M HEAVY EQUIPMENT MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. TECHNICAL DATA ACCORDING TO THE MANUFACTURER, NO GUARANTEE! SUBJECT TO PRIOR SALE, ON BEHALF OF THE CUSTOMER TERMS OF DELIVERY: FROM LOCATION CLOSE TO 73433 AALEN OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-working width 1000 mm, working height 170 mm\r\nslicing width 830 mm, thickness 10,7 mm\r\nvariable speed of automatic infeed, \r\nstainless steel, model 2003 WORKING WIDTH 1000 MM, WORKING HEIGHT 170 MM\R\NSLICING WIDTH 830 MM, THICKNESS 10,7 MM\R\NVARIABLE SPEED OF AUTOMATIC INFEED, \R\NSTAINLESS STEEL, MODEL 2003
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-no. 04048

cnc machining center ima bima 810 / d / 2 h for worktops with automatic setup table commissioning 1998 traversal direction from left to right specifications: working height 950 + 50 mm working plate size 4500 mm x 1200 mm x 30 / 40 mm (lwh) heavy green dtrã¤ger trained as a machine bed with cross beams as the base engine.
the lower space is approx. 300 mm, height with a waste conveyor belt over the length of the machine bed provided,

editing table with programmable cleaners also tracked with integrated vacuum clamping device, comprising: 4 continuously about nc axes in x direction adjustable support arms with 2 continuously about nc axes in the y direction positioned vacuum suction plates.

processing support:
the editing support consists of a stable, torsionally rigid welded steel construction.
the management of the processing units is carried out in all axes (x-y-z) into the dust-protected, hardened precision linear motion system. the editing support is a central connection for the extraction.
 
inlet direction van from left to right.	
enema device comprising:
-2 continuously about nc-axes mobile transport tongs, in x-direction up to 2000 mm can be positioned to one another.
-1 straight roller conveyor, driven approx. 1.2 m wide and approx. 5.0 m long roller pitch 125 mm
-integrated breitenmess and alignment station.
measuring range 200-1200 mm
 exit device comprising:
-2 continuously about nc-axes mobile transport tongs, in x-direction up to 2000 mm can be positioned to one another.
-1 powered roller conveyor, just rolling, approx. 1.2 m wide, approx. 5 m long; 
division of roles 125 mm

cnc contouring imatronic 231 cnc contouring control system with position-controlled axes. linear interpolation of simultaneously all axes, circular interpolation of two axes in all three planes (in dpi).
integrated programmable logic controller with status message of a / outputs via led and the screen in the control panel.
integrated pc computers, 486sx, 25 mhz, 8 mb ram, 200 mb hdd, 3 1/2 inch floppy drive, 256 k-byte ram buffered workpiece program memory as memory. this is automatically loaded when editing from the hard disk.

user interface for the creation of cnc machining programs. 
imawop

automatic correction calculation for all editing aggregates tool data management, radius and length value for all tools work list creation graphical simulation of the machining of a workpiece drive system position-controlled axles with optimal acceleration and braking performance and towing punching monitoring processing units: 076547: two main spindles, spindle taper: hsk f63,.
power of 12 kw cone diameter 38 mm 547994: two times 18-faches spare magazine magazine places: 18 designed for the recording of adapter units tool length max 220 mm tool diameter max 105 / 205 mm 534691: four milling chucks hsk f63 compl. with collet 25 mm 600112: two central integrated cnc axes, 360 â° turn, all adapter units with torque reaction arm on the main spindle and pneumatic interface 076896: an adapter unit as momentary horizontal nutsã¤ge to laminate under milling in basin snippets travel 5 mm, diameter 100 mm holes 22 mm 076894: an adapter unit for stationary tool holder with 5 mm of travel, can be used as a horizontal nutsã¤ge 076975: an adapter unit corner cutter speed max 6000 rpm milling recording 10 mm rotation range 360 â° 076967: an adapter unit angle blade mitre saws, manually adjustable saw blade diameter 30 mm 200 mm range of 0-100 â°

778625: a stem adapter to cancel of the machined apr profile piece accessories

742595: a probe for detecting the actual workpiece dimensions in the xy and z direction frequency converters spannungskonstant holder / air conditioners 1717066: spannungskonstant holder for the control voltage fluctuations +/-5% 171065: air conditioning unit for the cabinet at ambient temperature above 35 â° c. 

automatic central lubrication for the entire machine two additional waste conveyor 170964: batch run for countertops - cam files 171082: handelsscanner with integrated decoder 171052: network coupling imatronic 231 on an existing network 

170972: dde terminal automatic machine terminal for data acquisition and evaluation on the production machine 171048: remote diagnostics package for imatronic 231 optional: 1 rwg-aufstapeln portal, 8 course, apl buffer storage control system via ferror control

technical data: lwh in mm: 16.000 x 2,000 x 1,300 stack height 1500 mm (ok floor) performance 4 cycles / min connection voltage 400 v, 50 hz
air connection â½ lw 11 vacuum siemens side channel compressor install. services 5.5 kw hub fu regulated 3.0 kw support longitudinal (fu regulated) 4.0 kw vacuum stable bridge construction with 4 feet of pipe 400 x 400 mm wide base plates for the shipping anchors of the plant to the floor is a 2 top rails for the inclusion of the support, support uf guides stored and running on vulkolanrollen. 
support consists of sturdy welded construction, equipped with a severity for the stroke movement (advantage: low height) suction beam, construction made of aluminium, prepared for the recording of the suction plate assembly enough cleaner 70 mm diameter. 

for sale from customer site.  

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

delivery: in stock

our general terms and conditions apply, see in the  






 NO. 04048 CNC MACHINING CENTER IMA BIMA 810 / D / 2 H FOR WORKTOPS WITH AUTOMATIC SETUP TABLE COMMISSIONING 1998 TRAVERSAL DIRECTION FROM LEFT TO RIGHT SPECIFICATIONS: WORKING HEIGHT 950 + 50 MM WORKING PLATE SIZE 4500 MM X 1200 MM X 30 / 40 MM (LWH) HEAVY GREEN DTR&ATILDE;&CURREN;GER TRAINED AS A MACHINE BED WITH CROSS BEAMS AS THE BASE ENGINE. THE LOWER SPACE IS APPROX. 300 MM, HEIGHT WITH A WASTE CONVEYOR BELT OVER THE LENGTH OF THE MACHINE BED PROVIDED, EDITING TABLE WITH PROGRAMMABLE CLEANERS ALSO TRACKED WITH INTEGRATED VACUUM CLAMPING DEVICE, COMPRISING: 4 CONTINUOUSLY ABOUT NC AXES IN X DIRECTION ADJUSTABLE SUPPORT ARMS WITH 2 CONTINUOUSLY ABOUT NC AXES IN THE Y DIRECTION POSITIONED VACUUM SUCTION PLATES. PROCESSING SUPPORT: THE EDITING SUPPORT CONSISTS OF A STABLE, TORSIONALLY RIGID WELDED STEEL CONSTRUCTION. THE MANAGEMENT OF THE PROCESSING UNITS IS CARRIED OUT IN ALL AXES (X-Y-Z) INTO THE DUST-PROTECTED, HARDENED PRECISION LINEAR MOTION SYSTEM. THE EDITING SUPPORT IS A CENTRAL CONNECTION FOR THE EXTRACTION. INLET DIRECTION VAN FROM LEFT TO RIGHT. ENEMA DEVICE COMPRISING: -2 CONTINUOUSLY ABOUT NC-AXES MOBILE TRANSPORT TONGS, IN X-DIRECTION UP TO 2000 MM CAN BE POSITIONED TO ONE ANOTHER. -1 STRAIGHT ROLLER CONVEYOR, DRIVEN APPROX. 1.2 M WIDE AND APPROX. 5.0 M LONG ROLLER PITCH 125 MM -INTEGRATED BREITENMESS AND ALIGNMENT STATION. MEASURING RANGE 200-1200 MM EXIT DEVICE COMPRISING: -2 CONTINUOUSLY ABOUT NC-AXES MOBILE TRANSPORT TONGS, IN X-DIRECTION UP TO 2000 MM CAN BE POSITIONED TO ONE ANOTHER. -1 POWERED ROLLER CONVEYOR, JUST ROLLING, APPROX. 1.2 M WIDE, APPROX. 5 M LONG; DIVISION OF ROLES 125 MM CNC CONTOURING IMATRONIC 231 CNC CONTOURING CONTROL SYSTEM WITH POSITION-CONTROLLED AXES. LINEAR INTERPOLATION OF SIMULTANEOUSLY ALL AXES, CIRCULAR INTERPOLATION OF TWO AXES IN ALL THREE PLANES (IN DPI). INTEGRATED PROGRAMMABLE LOGIC CONTROLLER WITH STATUS MESSAGE OF A / OUTPUTS VIA LED AND THE SCREEN IN THE CONTROL PANEL. INTEGRATED PC COMPUTERS, 486SX, 25 MHZ, 8 MB RAM, 200 MB HDD, 3 1/2 INCH FLOPPY DRIVE, 256 K-BYTE RAM BUFFERED WORKPIECE PROGRAM MEMORY AS MEMORY. THIS IS AUTOMATICALLY LOADED WHEN EDITING FROM THE HARD DISK. USER INTERFACE FOR THE CREATION OF CNC MACHINING PROGRAMS. IMAWOP AUTOMATIC CORRECTION CALCULATION FOR ALL EDITING AGGREGATES TOOL DATA MANAGEMENT, RADIUS AND LENGTH VALUE FOR ALL TOOLS WORK LIST CREATION GRAPHICAL SIMULATION OF THE MACHINING OF A WORKPIECE DRIVE SYSTEM POSITION-CONTROLLED AXLES WITH OPTIMAL ACCELERATION AND BRAKING PERFORMANCE AND TOWING PUNCHING MONITORING PROCESSING UNITS: 076547: TWO MAIN SPINDLES, SPINDLE TAPER: HSK F63,. POWER OF 12 KW CONE DIAMETER 38 MM 547994: TWO TIMES 18-FACHES SPARE MAGAZINE MAGAZINE PLACES: 18 DESIGNED FOR THE RECORDING OF ADAPTER UNITS TOOL LENGTH MAX 220 MM TOOL DIAMETER MAX 105 / 205 MM 534691: FOUR MILLING CHUCKS HSK F63 COMPL. WITH COLLET 25 MM 600112: TWO CENTRAL INTEGRATED CNC AXES, 360 &ACIRC;&DEG; TURN, ALL ADAPTER UNITS WITH TORQUE REACTION ARM ON THE MAIN SPINDLE AND PNEUMATIC INTERFACE 076896: AN ADAPTER UNIT AS MOMENTARY HORIZONTAL NUTS&ATILDE;&CURREN;GE TO LAMINATE UNDER MILLING IN BASIN SNIPPETS TRAVEL 5 MM, DIAMETER 100 MM HOLES 22 MM 076894: AN ADAPTER UNIT FOR STATIONARY TOOL HOLDER WITH 5 MM OF TRAVEL, CAN BE USED AS A HORIZONTAL NUTS&ATILDE;&CURREN;GE 076975: AN ADAPTER UNIT CORNER CUTTER SPEED MAX 6000 RPM MILLING RECORDING 10 MM ROTATION RANGE 360 &ACIRC;&DEG; 076967: AN ADAPTER UNIT ANGLE BLADE MITRE SAWS, MANUALLY ADJUSTABLE SAW BLADE DIAMETER 30 MM 200 MM RANGE OF 0-100 &ACIRC;&DEG; 778625: A STEM ADAPTER TO CANCEL OF THE MACHINED APR PROFILE PIECE ACCESSORIES 742595: A PROBE FOR DETECTING THE ACTUAL WORKPIECE DIMENSIONS IN THE XY AND Z DIRECTION FREQUENCY CONVERTERS SPANNUNGSKONSTANT HOLDER / AIR CONDITIONERS 1717066: SPANNUNGSKONSTANT HOLDER FOR THE CONTROL VOLTAGE FLUCTUATIONS +/-5% 171065: AIR CONDITIONING UNIT FOR THE CABINET AT AMBIENT TEMPERATURE ABOVE 35 &ACIRC;&DEG; C. AUTOMATIC CENTRAL LUBRICATION FOR THE ENTIRE MACHINE TWO ADDITIONAL WASTE CONVEYOR 170964: BATCH RUN FOR COUNTERTOPS - CAM FILES 171082: HANDELSSCANNER WITH INTEGRATED DECODER 171052: NETWORK COUPLING IMATRONIC 231 ON AN EXISTING NETWORK 170972: DDE TERMINAL AUTOMATIC MACHINE TERMINAL FOR DATA ACQUISITION AND EVALUATION ON THE PRODUCTION MACHINE 171048: REMOTE DIAGNOSTICS PACKAGE FOR IMATRONIC 231 OPTIONAL: 1 RWG-AUFSTAPELN PORTAL, 8 COURSE, APL BUFFER STORAGE CONTROL SYSTEM VIA FERROR CONTROL TECHNICAL DATA: LWH IN MM: 16.000 X 2,000 X 1,300 STACK HEIGHT 1500 MM (OK FLOOR) PERFORMANCE 4 CYCLES / MIN CONNECTION VOLTAGE 400 V, 50 HZ AIR CONNECTION &ACIRC;&FRAC12; LW 11 VACUUM SIEMENS SIDE CHANNEL COMPRESSOR INSTALL. SERVICES 5.5 KW HUB FU REGULATED 3.0 KW SUPPORT LONGITUDINAL (FU REGULATED) 4.0 KW VACUUM STABLE BRIDGE CONSTRUCTION WITH 4 FEET OF PIPE 400 X 400 MM WIDE BASE PLATES FOR THE SHIPPING ANCHORS OF THE PLANT TO THE FLOOR IS A 2 TOP RAILS FOR THE INCLUSION OF THE SUPPORT, SUPPORT UF GUIDES STORED AND RUNNING ON VULKOLANROLLEN. SUPPORT CONSISTS OF STURDY WELDED CONSTRUCTION, EQUIPPED WITH A SEVERITY FOR THE STROKE MOVEMENT (ADVANTAGE: LOW HEIGHT) SUCTION BEAM, CONSTRUCTION MADE OF ALUMINIUM, PREPARED FOR THE RECORDING OF THE SUCTION PLATE ASSEMBLY ENOUGH CLEANER 70 MM DIAMETER. FOR SALE FROM CUSTOMER SITE. USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE DELIVERY: IN STOCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-max. thickness: 10 mm cutting length max.: 7.100 mm distance between the columns: 7.100 mm oil volume: 900 l required power: 45 kw dimensions l x w x h: 7.890 x 3.740 x 2.695  mm weight of machine approx.: 48 ton MAX. THICKNESS: 10 MM CUTTING LENGTH MAX.: 7.100 MM DISTANCE BETWEEN THE COLUMNS: 7.100 MM OIL VOLUME: 900 L REQUIRED POWER: 45 KW DIMENSIONS L X W X H: 7.890 X 3.740 X 2.695 MM WEIGHT OF MACHINE APPROX.: 48 TON
Vendedor: PTF Maschinenhandelsgesellschaft mbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more AJIAL types: