615 ofertas

Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-year built: approx 1972
max tube length: 1500 mm
maximum pipe diameter: 40 x 3 mm
total power consumption: approx. 3 kw / 380 v
machine weight: 800 kg

equipment / accessories:

div. bending tools

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the machine before purchasing power.
one ord. rchng. plus ges. vat will be issued. YEAR BUILT: APPROX 1972 MAX TUBE LENGTH: 1500 MM MAXIMUM PIPE DIAMETER: 40 X 3 MM TOTAL POWER CONSUMPTION: APPROX. 3 KW / 380 V MACHINE WEIGHT: 800 KG EQUIPMENT / ACCESSORIES: DIV. BENDING TOOLS ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE MACHINE BEFORE PURCHASING POWER. ONE ORD. RCHNG. PLUS GES. VAT WILL BE ISSUED.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-sheet width: 2100 mm<br/>plate thickness: 6 mm<br/>pre-bending: 5 mm<br/>upper roll diameter: 170 mm<br/>min. bending diameter: 255 mm<br/>total power requirement: 4 kw<br/>weight of the machine ca.: 2300 kg<br/>dimensions of the machine ca.: 3800x1130x1100 mm<br/>accessories / equipment:<br/>- conical bending device<br/>- induction hardened rolls<br/>- digital display for side rollers<br/>- machine made of steel construction<br/>- separate control panel<br/>- two speeds<br/>- all rollers on ball bearings<br/>- folding and support bearing from the top roller is actuated from the control panel.<br/>when the folding bearing is opened, the roller moves automatically upwards.<br/>- conical adjustment of the rollers via control panel<br/>- central rollers are via hydraulic motor and rotary reduction gear<br/>driven. (top and bottom rollers)<br/>- calibration<br/><br/><br/><br/><br/> SHEET WIDTH: 2100 MM
PLATE THICKNESS: 6 MM
PRE-BENDING: 5 MM
UPPER ROLL DIAMETER: 170 MM
MIN. BENDING DIAMETER: 255 MM
TOTAL POWER REQUIREMENT: 4 KW
WEIGHT OF THE MACHINE CA.: 2300 KG
DIMENSIONS OF THE MACHINE CA.: 3800X1130X1100 MM
ACCESSORIES / EQUIPMENT:
- CONICAL BENDING DEVICE
- INDUCTION HARDENED ROLLS
- DIGITAL DISPLAY FOR SIDE ROLLERS
- MACHINE MADE OF STEEL CONSTRUCTION
- SEPARATE CONTROL PANEL
- TWO SPEEDS
- ALL ROLLERS ON BALL BEARINGS
- FOLDING AND SUPPORT BEARING FROM THE TOP ROLLER IS ACTUATED FROM THE CONTROL PANEL.
WHEN THE FOLDING BEARING IS OPENED, THE ROLLER MOVES AUTOMATICALLY UPWARDS.
- CONICAL ADJUSTMENT OF THE ROLLERS VIA CONTROL PANEL
- CENTRAL ROLLERS ARE VIA HYDRAULIC MOTOR AND ROTARY REDUCTION GEAR
DRIVEN. (TOP AND BOTTOM ROLLERS)
- CALIBRATION




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-trumpf bending machine mod trumabend v85 / bj. 96 / 2000 x 85 t / hub 215 / camber / cnc delem / hours: 3,300 / accessories / good condition
fe.gi.maschinen.sbg.at

trumpf press brake mod trumabend v85 / year 96 / 2000 x 85 t / stroke 215 / crowing / cnc delem / hours: 3,300 / accessories / good conditions fe.gi.maschinen.sbg.at TRUMPF BENDING MACHINE MOD TRUMABEND V85 / BJ. 96 / 2000 X 85 T / HUB 215 / CAMBER / CNC DELEM / HOURS: 3,300 / ACCESSORIES / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT TRUMPF PRESS BRAKE MOD TRUMABEND V85 / YEAR 96 / 2000 X 85 T / STROKE 215 / CROWING / CNC DELEM / HOURS: 3,300 / ACCESSORIES / GOOD CONDITIONS FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-pressure: 300 t<br/>chamfer lenght: 6050 mm<br/>control: cybelec modeva 10s <br/>total power requirement: 38 kw<br/>weight of the machine ca.: 33000 kg<br/><br/><br/><br/><br/> PRESSURE: 300 T
CHAMFER LENGHT: 6050 MM
CONTROL: CYBELEC MODEVA 10S
TOTAL POWER REQUIREMENT: 38 KW
WEIGHT OF THE MACHINE CA.: 33000 KG




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Precio: 50 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
  MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Precio: used machinery auction RESALE 39.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>pressure: 20 to<br/>dimensions (l x w x h) approx.: 1550 x 1800 x 1965 mm<br/>description: <b>this is a demonstration machine in stock!</b><br> ergonomic press brake made of a rigid monoblock frame (mehaanite 700 n/mm²)<br> the machine has a direct drive via servo motor and ball screw which works on tension to avoid deformation.<br> in addition, the machine is equipped with a 6-axis backgauge, a teda quick tool clamp and an iris rapid bend safety device<br> <br> - serial number: fx85610002580<br> - bending capacity: 200 kn<br> - usable bending length: 850 mm<br> - y-axis travel stroke: 1956 mm<br> - y-axis speed: 200 mm/sec<br> - installation height(table to upper bending beam): 470 (395) mm<br> - x axis travel stroke (6 axes x1-x2-r1-r2-z1-z2): 375 mm<br> - r axis travel stroke (6 axes x1-x2-r1-r2-z1-z2: 180 mm<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 744 mm/sec<br> - x axis velocity (6 axes x1-x2-r1-r2-z1-z2): 1000 mm/sec<br> - r axis speed (6 axes x1-x2-r1-r2-z1-z2): 350 mm/sec<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 220 mm/sec<br> - wireless connection / wireless / usb-port: yes / 2<br> - main motor power: 1x5,2 kw<br> - connection power: 5 kwa<br> <br> <b>accessories:</b><br> - top promecam tool holder (without tools) with quick-release lever<br> - below tool holder for amada / promecam and wila plug-in matrices<br> - cnc control panasonic toughbook incl. battery, usb connection and wifi<br> - anti-reflective lcd touchscreen<br> - safety device dual laser<br> - rigid mehaanite monoblock cast iron body tensile strength 700n/mm²<br> - direct drive via servo motor and recirculating ball screw<br> - 2-axle backgauge moves<br> - ergonomic design<br> <br> <b>special accessories:</b><br> teda speed grip quick-change system top, for standard amada/promecam tools<br> 6 axes backgauge x1/x2/r1/r2/z1/z2<br> iris rapid bend, safety device, travels at rapid traverse to the mute point<br> <br> the machine can be transported by forkl WEIGHT APPROX.: 2500 KG
PRESSURE: 20 TO
DIMENSIONS (L X W X H) APPROX.: 1550 X 1800 X 1965 MM
DESCRIPTION: THIS IS A DEMONSTRATION MACHINE IN STOCK!
ERGONOMIC PRESS BRAKE MADE OF A RIGID MONOBLOCK FRAME (MEHAANITE 700 N/MM²)
THE MACHINE HAS A DIRECT DRIVE VIA SERVO MOTOR AND BALL SCREW WHICH WORKS ON TENSION TO AVOID DEFORMATION.
IN ADDITION, THE MACHINE IS EQUIPPED WITH A 6-AXIS BACKGAUGE, A TEDA QUICK TOOL CLAMP AND AN IRIS RAPID BEND SAFETY DEVICE

- SERIAL NUMBER: FX85610002580
- BENDING CAPACITY: 200 KN
- USABLE BENDING LENGTH: 850 MM
- Y-AXIS TRAVEL STROKE: 1956 MM
- Y-AXIS SPEED: 200 MM/SEC
- INSTALLATION HEIGHT(TABLE TO UPPER BENDING BEAM): 470 (395) MM
- X AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2): 375 MM
- R AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2: 180 MM
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 744 MM/SEC
- X AXIS VELOCITY (6 AXES X1-X2-R1-R2-Z1-Z2): 1000 MM/SEC
- R AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 350 MM/SEC
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 220 MM/SEC
- WIRELESS CONNECTION / WIRELESS / USB-PORT: YES / 2
- MAIN MOTOR POWER: 1X5,2 KW
- CONNECTION POWER: 5 KWA

ACCESSORIES:
- TOP PROMECAM TOOL HOLDER (WITHOUT TOOLS) WITH QUICK-RELEASE LEVER
- BELOW TOOL HOLDER FOR AMADA / PROMECAM AND WILA PLUG-IN MATRICES
- CNC CONTROL PANASONIC TOUGHBOOK INCL. BATTERY, USB CONNECTION AND WIFI
- ANTI-REFLECTIVE LCD TOUCHSCREEN
- SAFETY DEVICE DUAL LASER
- RIGID MEHAANITE MONOBLOCK CAST IRON BODY TENSILE STRENGTH 700N/MM²
- DIRECT DRIVE VIA SERVO MOTOR AND RECIRCULATING BALL SCREW
- 2-AXLE BACKGAUGE MOVES
- ERGONOMIC DESIGN

SPECIAL ACCESSORIES:
TEDA SPEED GRIP QUICK-CHANGE SYSTEM TOP, FOR STANDARD AMADA/PROMECAM TOOLS
6 AXES BACKGAUGE X1/X2/R1/R2/Z1/Z2
IRIS RAPID BEND, SAFETY DEVICE, TRAVELS AT RAPID TRAVERSE TO THE MUTE POINT

THE MACHINE CAN BE TRANSPORTED BY FORKL
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- year 1988
- arm capacity 25 ton 
- 3,700 hours of work
- electronic control unit for controlling the 4 stabilisers
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
  MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - YEAR 1988 - ARM CAPACITY 25 TON - 3,700 HOURS OF WORK - ELECTRONIC CONTROL UNIT FOR CONTROLLING THE 4 STABILISERS MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Precio: 2.700 €
Ubicación: Land-: 38 x 1,5 mm<br/>: 38 x 1,5 mm<br/>: 35 x 3 mm<br/>: 30 x 2 mm<br/>: 35 x 1,5 mm<br/>: 42 x 1,5 mm<br/>: 42 x 1,5 mm<br/>: 50 x 2 mm<br/>: 50 x 2 mm<br/>: 50 x 4 mm<br/>: 20 mm<br/>: 180 °<br/>: 300 mm<br/>: 245 mm<br/>: 320 mm<br/>: 23 kg<br/>demomachine<br/><br/>digital preseting of bending angle 0 - 180° <br/>one phase motor 220 v/ 900 watt <br/>electrical motor brake <br/>overload signal lamp <br/>stand made of cast iron <br/>prepared for fixing on a tripod (not included)<br/>90° bending in 6 sec.<br/><br/>options aigainst additional price:<br/><br/>tripod ? 170,-<br/><br/>machine with tool kit for tubes   md070mkgs  ? 3.400,-<br/>½?gas r46,  ¾?gas r56,  1?gas r82<br/><br/>maximum tube diameter: <br/>standard steel tube: 38 x 1,5 mm<br/>gas tube: 1", x 3,4<br/>furniture tube:	38 x 1,5 mm<br/>st35 hydraulic tube: 35 x 3 mm<br/>stainless steel tube aisi304-316: 30 x 2 mm<br/>stainless steel tube aisi308 (food industry): 35 x 1,5 mm<br/>soft brass: 42 x 1,5 mm<br/>hard copper and aluminium: 42 x 1,5 mm<br/>soft copper: 50 x 2 mm<br/>conduit-tubes (taz): 50 x 2 mm<br/>mepla, gebereit and similar tubes: 50 x 4 mm<br/>round bar: 20 mm <br/>maximum bending angle: 180° <br/>motor: 220v / 0,9 kw <br/>length: 300 mm <br/>width: 245 mm <br/>height: 320 mm  <br/>weight: 23 kg<br/><br/><br/><br/> : 38 X 1,5 MM
: 38 X 1,5 MM
: 35 X 3 MM
: 30 X 2 MM
: 35 X 1,5 MM
: 42 X 1,5 MM
: 42 X 1,5 MM
: 50 X 2 MM
: 50 X 2 MM
: 50 X 4 MM
: 20 MM
: 180 °
: 300 MM
: 245 MM
: 320 MM
: 23 KG
DEMOMACHINE

DIGITAL PRESETING OF BENDING ANGLE 0 - 180° 
ONE PHASE MOTOR 220 V/ 900 WATT 
ELECTRICAL MOTOR BRAKE 
OVERLOAD SIGNAL LAMP 
STAND MADE OF CAST IRON 
PREPARED FOR FIXING ON A TRIPOD (NOT INCLUDED)
90° BENDING IN 6 SEC.

OPTIONS AIGAINST ADDITIONAL PRICE:

TRIPOD ? 170,-

MACHINE WITH TOOL KIT FOR TUBES   MD070MKGS ? 3.400,-
½?GAS R46,  ¾?GAS R56,  1?GAS R82

MAXIMUM TUBE DIAMETER:
STANDARD STEEL TUBE: 38 X 1,5 MM
GAS TUBE: 1", X 3,4
FURNITURE TUBE: 38 X 1,5 MM
ST35 HYDRAULIC TUBE: 35 X 3 MM
STAINLESS STEEL TUBE AISI304-316: 30 X 2 MM
STAINLESS STEEL TUBE AISI308 (FOOD INDUSTRY): 35 X 1,5 MM
SOFT BRASS: 42 X 1,5 MM
HARD COPPER AND ALUMINIUM: 42 X 1,5 MM
SOFT COPPER: 50 X 2 MM
CONDUIT-TUBES (TAZ): 50 X 2 MM
MEPLA, GEBEREIT AND SIMILAR TUBES: 50 X 4 MM
ROUND BAR: 20 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR: 220V / 0,9 KW
LENGTH: 300 MM
WIDTH: 245 MM
HEIGHT: 320 MM
WEIGHT: 23 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: used machinery auction RESALE 42.000 €
Ubicación: Land-consisting of: press brake hds 1030 to nt, pressing force 100, press bar length 3.110 mm, throat depth 415 mm, stroke 200 mm, height 500 mm, passage stand 2.700 mm with 6 controlled axes, bending robot astro 100 nt, max load capacity 20 kg, with 5 controlled axes, thickness of 0.6 mm to 2.5 mm, part size of min. 150 mm x 150 mm, maximum 800 mm x 1,000 mm, loading and unloading loading robot astro - mp 20, maximum capacity 20 kg, with 6 controlled axes, stack height raw material up to 500 mm, sheet thickness from 0.6 mm to 2.5 mm, part size of min. 150 mm x 150 mm , maximum 800 mm x 1,000 mm, ac-300 pallet conveyors, max range 3 euro pallets per level, maximum filler de 1,000 kg, length incl. lift table 3,800 mm, bending robot astro 100, umgreifen station, with ap 100 software, astro-cam programming, computer programming, security being housing of the cell, duty hours read off 14.187 hours CONSISTING OF: PRESS BRAKE HDS 1030 TO NT, PRESSING FORCE 100, PRESS BAR LENGTH 3.110 MM, THROAT DEPTH 415 MM, STROKE 200 MM, HEIGHT 500 MM, PASSAGE STAND 2.700 MM WITH 6 CONTROLLED AXES, BENDING ROBOT ASTRO 100 NT, MAX LOAD CAPACITY 20 KG, WITH 5 CONTROLLED AXES, THICKNESS OF 0.6 MM TO 2.5 MM, PART SIZE OF MIN. 150 MM X 150 MM, MAXIMUM 800 MM X 1,000 MM, LOADING AND UNLOADING LOADING ROBOT ASTRO - MP 20, MAXIMUM CAPACITY 20 KG, WITH 6 CONTROLLED AXES, STACK HEIGHT RAW MATERIAL UP TO 500 MM, SHEET THICKNESS FROM 0.6 MM TO 2.5 MM, PART SIZE OF MIN. 150 MM X 150 MM , MAXIMUM 800 MM X 1,000 MM, AC-300 PALLET CONVEYORS, MAX RANGE 3 EURO PALLETS PER LEVEL, MAXIMUM FILLER DE 1,000 KG, LENGTH INCL. LIFT TABLE 3,800 MM, BENDING ROBOT ASTRO 100, UMGREIFEN STATION, WITH AP 100 SOFTWARE, ASTRO-CAM PROGRAMMING, COMPUTER PROGRAMMING, SECURITY BEING HOUSING OF THE CELL, DUTY HOURS READ OFF 14.187 HOURS
Vendedor: Indutax GmbH
Año de construcción: usado
Precio: 41.500 €
Ubicación: Land-: 2.550 mm<br/>: 60 to<br/>: 5,5 kw<br/>: 2.040 mm<br/>: 350 mm<br/>: 165 mm<br/>: 400 mm<br/>: 600 mm<br/>: 90 mm<br/>: 4.015 mm<br/>: 1.900 mm<br/>: 2.550 mm<br/>: 6.000 kg<br/>cnc steuerung cybelec modeva 15s (retrofit 2009)<br/>laser guard with motorized adjustment fiessler akas (retrofit 2009)<br/>6 axes back gauge (x1, x2, r1, r2, z1, z2) with pneumatic finger selection, rotary ball spindle 600 mm travel<br/>2 pcs. sheet support arms<br/>crowning hydraulic by cnc<br/>hydraulic upper tool clamping type r<br/>press table<br/>two hand + foot pedal<br/>equiptment: tool carriage with miscellaneous upper and lower tools<br/>users manual in german + ce<br/><br/>complies with the current industrial safety regulation (amvo &, uvv)<br/><br/><br/><br/><br/><br/><br/>bending length: 2.550 mm<br/>bending force: 60 to<br/>motor power: 5,5 kw<br/>distance between columns:	2.040 mm<br/>gap: 350 mm<br/>stroke: 165 mm<br/>daylight: 400 mm<br/>back gauge: 600 mm<br/>speed of upper beam: 85/10 mm/sek.<br/>table width: 90 mm<br/>length: 4.015 mm<br/>width: 1.900 mm<br/>heigth: 2.550 mm<br/>weight: 6.000 kg<br/><br/><br/><br/> : 2.550 MM
: 60 TO
: 5,5 KW
: 2.040 MM
: 350 MM
: 165 MM
: 400 MM
: 600 MM
: 90 MM
: 4.015 MM
: 1.900 MM
: 2.550 MM
: 6.000 KG
CNC STEUERUNG CYBELEC MODEVA 15S (RETROFIT 2009)
LASER GUARD WITH MOTORIZED ADJUSTMENT FIESSLER AKAS (RETROFIT 2009)
6 AXES BACK GAUGE (X1, X2, R1, R2, Z1, Z2) WITH PNEUMATIC FINGER SELECTION, ROTARY BALL SPINDLE 600 MM TRAVEL
2 PCS. SHEET SUPPORT ARMS
CROWNING HYDRAULIC BY CNC
HYDRAULIC UPPER TOOL CLAMPING TYPE R
PRESS TABLE
TWO HAND + FOOT PEDAL
EQUIPTMENT: TOOL CARRIAGE WITH MISCELLANEOUS UPPER AND LOWER TOOLS
USERS MANUAL IN GERMAN + CE

COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATION (AMVO &, UVV)






BENDING LENGTH: 2.550 MM
BENDING FORCE: 60 TO
MOTOR POWER: 5,5 KW
DISTANCE BETWEEN COLUMNS: 2.040 MM
GAP: 350 MM
STROKE: 165 MM
DAYLIGHT: 400 MM
BACK GAUGE: 600 MM
SPEED OF UPPER BEAM: 85/10 MM/SEK.
TABLE WIDTH: 90 MM
LENGTH: 4.015 MM
WIDTH: 1.900 MM
HEIGTH: 2.550 MM
WEIGHT: 6.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-created: 2005
parameters: control system: safan pressing force: 170 t bending length: 4100 mm 4-axis cnc bombirung motor power: 11 kw hub upper bar: 300 mm working pressure: 345 bar machine weight: 15700 kg CREATED: 2005 PARAMETERS: CONTROL SYSTEM: SAFAN PRESSING FORCE: 170 T BENDING LENGTH: 4100 MM 4-AXIS CNC BOMBIRUNG MOTOR POWER: 11 KW HUB UPPER BAR: 300 MM WORKING PRESSURE: 345 BAR MACHINE WEIGHT: 15700 KG
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-: 2.020 mm<br/>: 3,5 mm<br/>: 3+1,5 kw<br/>: 1.000 mm<br/>: 250 mm<br/>: 50 mm<br/>: 2.410 mm<br/>: 1.900 mm<br/>: 1.800 mm<br/>: 2.680 kg<br/>mot. cnc folding machine<br/>positioning control pos 800 b with supporting table and stop area 1.000 mm with bending beam drive on both sides by precision roller chains<br/>1 set high clamping beam rail h 110 mm divided (12 pcs.), total length 2.380 mm<br/>1 pce. straight rail 45° throughout<br/>1 pce. attachment rail 10 mm<br/>1 pce. attachment rail 25 mm<br/>users manual in german (without circuit diagram)<br/><br/>does not comply with the current industrial safety regulations (amvo &, uvv)<br/><br/><br/><br/><br/>bending length: 2.020 mm<br/>bending power: 3,5 mm<br/>motor power: 3+1,5 kw<br/>stop area: 1.000 mm<br/>strop of upper beam rail: 250 mm<br/>bending beam adjustment area: 50 mm<br/>length: 2.410 mm<br/>width: 1.900 mm<br/>height: 1.800 mm<br/>weight: 2.680 kg<br/><br/><br/><br/> : 2.020 MM
: 3,5 MM
: 3+1,5 KW
: 1.000 MM
: 250 MM
: 50 MM
: 2.410 MM
: 1.900 MM
: 1.800 MM
: 2.680 KG
MOT. CNC FOLDING MACHINE
POSITIONING CONTROL POS 800 B WITH SUPPORTING TABLE AND STOP AREA 1.000 MM WITH BENDING BEAM DRIVE ON BOTH SIDES BY PRECISION ROLLER CHAINS
1 SET HIGH CLAMPING BEAM RAIL H 110 MM DIVIDED (12 PCS.), TOTAL LENGTH 2.380 MM
1 PCE. STRAIGHT RAIL 45° THROUGHOUT
1 PCE. ATTACHMENT RAIL 10 MM
1 PCE. ATTACHMENT RAIL 25 MM
USERS MANUAL IN GERMAN (WITHOUT CIRCUIT DIAGRAM)

DOES NOT COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)




BENDING LENGTH: 2.020 MM
BENDING POWER: 3,5 MM
MOTOR POWER: 3+1,5 KW
STOP AREA: 1.000 MM
STROP OF UPPER BEAM RAIL: 250 MM
BENDING BEAM ADJUSTMENT AREA: 50 MM
LENGTH: 2.410 MM
WIDTH: 1.900 MM
HEIGHT: 1.800 MM
WEIGHT: 2.680 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-trumpf
machine name : cnc press brakes
manufacturer : trumpf
model : trumabend v85 s
location : mumbai
year of manufacturing : 1996
technical specification: 
control: delem
capacity:85 
tons
bending length: 2550mm
open height: 365mm
stroke length:215mm
throat depth: 410mm
no. of axis: 6


 TRUMPF MACHINE NAME : CNC PRESS BRAKES MANUFACTURER : TRUMPF MODEL : TRUMABEND V85 S LOCATION : MUMBAI YEAR OF MANUFACTURING : 1996 TECHNICAL SPECIFICATION: CONTROL: DELEM CAPACITY:85 TONS BENDING LENGTH: 2550MM OPEN HEIGHT: 365MM STROKE LENGTH:215MM THROAT DEPTH: 410MM NO. OF AXIS: 6
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-grinding diameter: 350 mm<br/>grinding length: 1500 mm<br/>centre height: 175 mm<br/>control:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>basis:<br/>kellenberger kel-varia ur175-1500<br/>(fotos von bereits gelieferter maschine mit<br/>spitzenweite 1000mm)<br/><br/>schleifkopf ur mit t1-t2-t3<br/><br/>grundausstattung:<br/><br/>-b-achse hochauflösend<br/>-marposs messeinrichtung zur werkzeugvermessung<br/>-schwenken um die scheibenkante<br/>-aktive längspositionierung<br/>-gap an t1 berührungslos<br/>-v-konstant<br/>-reitstock  mit handrückzug<br/>-wss mit konus mk5, optional mit adapter mk5/kurzkegel<br/><br/>folgende ausstattungen frei wählbar:<br/><br/>-schleifscheibendurchmesser t1<br/>-schleifscheibendurchmesser t2<br/>-innenschleifeinrichtung riemengetrieben oder<br/>-innenschleifeinrichtung mit hf spindel<br/>-durchmesser-messeinrichtung<br/>-hydraulischer pinolenrückzug<br/>-mikroverstellung am reitstock<br/>-werkstückspindelstock mit mk5 und kurzkegelaufnahme din 55026<br/>-cnc-gesteuerte c-achse in verbindung mit werkstückspindelstock s.o.<br/>-unrundschleifen<br/>-verstärkter werkstückspindelstock<br/>-spitzenerhöhung<br/><br/>weitere optionen auf anfrage möglich<br/><br/>es werden ausschließlich konkrete anfragen mit genauer<br/>ausstattungskonfiguration von anwendern bearbeitet<br/><br/><br/>mechanische Überholung:<br/><br/>-komplette maschine nach kellenberger messprotokoll überholt<br/>-neue servicefreundliche kabine<br/>-neulackierung<br/><br/>elektrische Überholung:<br/><br/>-neue moderne cnc-rundschleifmaschinen-steuerung<br/>-neu aufgebauter schaltschrank<br/>-neue antriebstechnik<br/>-austausch sämtlicher elektrischer leitungen berus druckschalter etc.<br/>-neue absolut-glasmaßstäbe in x- und z<br/>-neuer absolut drehgeber (bei-b-achse)<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> GRINDING DIAMETER: 350 MM
GRINDING LENGTH: 1500 MM
CENTRE HEIGHT: 175 MM
CONTROL:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
BASIS:
KELLENBERGER KEL-VARIA UR175-1500
(FOTOS VON BEREITS GELIEFERTER MASCHINE MIT
SPITZENWEITE 1000MM)

SCHLEIFKOPF UR MIT T1-T2-T3

GRUNDAUSSTATTUNG:

-B-ACHSE HOCHAUFLöSEND
-MARPOSS MESSEINRICHTUNG ZUR WERKZEUGVERMESSUNG
-SCHWENKEN UM DIE SCHEIBENKANTE
-AKTIVE LäNGSPOSITIONIERUNG
-GAP AN T1 BERüHRUNGSLOS
-V-KONSTANT
-REITSTOCK MIT HANDRüCKZUG
-WSS MIT KONUS MK5, OPTIONAL MIT ADAPTER MK5/KURZKEGEL

FOLGENDE AUSSTATTUNGEN FREI WäHLBAR:

-SCHLEIFSCHEIBENDURCHMESSER T1
-SCHLEIFSCHEIBENDURCHMESSER T2
-INNENSCHLEIFEINRICHTUNG RIEMENGETRIEBEN ODER
-INNENSCHLEIFEINRICHTUNG MIT HF SPINDEL
-DURCHMESSER-MESSEINRICHTUNG
-HYDRAULISCHER PINOLENRüCKZUG
-MIKROVERSTELLUNG AM REITSTOCK
-WERKSTüCKSPINDELSTOCK MIT MK5 UND KURZKEGELAUFNAHME DIN 55026
-CNC-GESTEUERTE C-ACHSE IN VERBINDUNG MIT WERKSTüCKSPINDELSTOCK S.O.
-UNRUNDSCHLEIFEN
-VERSTäRKTER WERKSTüCKSPINDELSTOCK
-SPITZENERHöHUNG

WEITERE OPTIONEN AUF ANFRAGE MöGLICH

ES WERDEN AUSSCHLIEßLICH KONKRETE ANFRAGEN MIT GENAUER
AUSSTATTUNGSKONFIGURATION VON ANWENDERN BEARBEITET


MECHANISCHE ÜBERHOLUNG:

-KOMPLETTE MASCHINE NACH KELLENBERGER MESSPROTOKOLL üBERHOLT
-NEUE SERVICEFREUNDLICHE KABINE
-NEULACKIERUNG

ELEKTRISCHE ÜBERHOLUNG:

-NEUE MODERNE CNC-RUNDSCHLEIFMASCHINEN-STEUERUNG
-NEU AUFGEBAUTER SCHALTSCHRANK
-NEUE ANTRIEBSTECHNIK
-AUSTAUSCH SäMTLICHER ELEKTRISCHER LEITUNGEN BERUS DRUCKSCHALTER ETC.
-NEUE ABSOLUT-GLASMAßSTäBE IN X- UND Z
-NEUER ABSOLUT DREHGEBER (BEI-B-ACHSE)










Vendedor: BEMA
Año de construcción: usado
Ubicación: Land-capacity 600 ton
bending lenght 6100 mm
throad depth 1200 mm CAPACITY 600 TON BENDING LENGHT 6100 MM THROAD DEPTH 1200 MM
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-pressure: 100 t<br/>chamfer lenght: 2600 mm<br/>distance between columns: 2100 mm<br/>column arm: 400 mm<br/>ram stroke speed: 200 mm/sec<br/>return speed: 155 mm/sec<br/>work speed: 9,5 mm/min<br/>work stroke: 275 mm<br/>dayligth: 530 mm<br/>oil volume: 150 ltr.<br/>table height: 900 mm<br/>voltage: 400 volt<br/>weight: 5.700 kg<br/>range l-w-h: 3750x1950x2800 mm<br/><br/><br/><br/><br/> PRESSURE: 100 T
CHAMFER LENGHT: 2600 MM
DISTANCE BETWEEN COLUMNS: 2100 MM
COLUMN ARM: 400 MM
RAM STROKE SPEED: 200 MM/SEC
RETURN SPEED: 155 MM/SEC
WORK SPEED: 9,5 MM/MIN
WORK STROKE: 275 MM
DAYLIGTH: 530 MM
OIL VOLUME: 150 LTR.
TABLE HEIGHT: 900 MM
VOLTAGE: 400 VOLT
WEIGHT: 5.700 KG
RANGE L-W-H: 3750X1950X2800 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-capacity 400 ton
bending lenght 6100 mm
distance between cloumns 5100 mm
throad debth 450 mm
cnc controller cybelec modeva 10s   CAPACITY 400 TON BENDING LENGHT 6100 MM DISTANCE BETWEEN CLOUMNS 5100 MM THROAD DEBTH 450 MM CNC CONTROLLER CYBELEC MODEVA 10S
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Precio: used machinery auction RESALE 1 €
Ubicación: Land-weight approx.: 9500 kg<br/>dimensions (l x w x h) approx.: 3200 x 2000 x 2400 mm<br/>description: promecam rg3000100 press brake<br> <br> serial number 100 590, included tool and 2 cabinets, pressing force 100 tons, bending length 3000 mm, loading area in truck 3200 x 2000 x 2400, WEIGHT APPROX.: 9500 KG
DIMENSIONS (L X W X H) APPROX.: 3200 X 2000 X 2400 MM
DESCRIPTION: PROMECAM RG3000100 PRESS BRAKE

SERIAL NUMBER 100 590, INCLUDED TOOL AND 2 CABINETS, PRESSING FORCE 100 TONS, BENDING LENGTH 3000 MM, LOADING AREA IN TRUCK 3200 X 2000 X 2400,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-working width max. 2,000 mm
de:
dreiwalzen-rundbiegemaschine, fabr. mg, typ ak 206 p, bj. 2000, ser.-nr. 2095, arbeitsbreite max. 2.000 mm
  WORKING WIDTH MAX. 2,000 MM DE: DREIWALZEN-RUNDBIEGEMASCHINE, FABR. MG, TYP AK 206 P, BJ. 2000, SER.-NR. 2095, ARBEITSBREITE MAX. 2.000 MM
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-sheet width: 3100 mm<br/>plate thickness: 10 mm<br/>pre-bending: 8 mm<br/>upper roll diameter: 270 mm<br/>lower roll diameter: 250 mm<br/>side roll diameter: 210 mm<br/>total power requirement: 11 kw<br/>weight of the machine ca.: 7750 kg<br/>dimensions of the machine ca.: 5600x1450x1600 m<br/><br/><br/><br/><br/> SHEET WIDTH: 3100 MM
PLATE THICKNESS: 10 MM
PRE-BENDING: 8 MM
UPPER ROLL DIAMETER: 270 MM
LOWER ROLL DIAMETER: 250 MM
SIDE ROLL DIAMETER: 210 MM
TOTAL POWER REQUIREMENT: 11 KW
WEIGHT OF THE MACHINE CA.: 7750 KG
DIMENSIONS OF THE MACHINE CA.: 5600X1450X1600 M




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-fabr.-no. f1011f, working width max. 1,000 mm, cap. 500 kn, stroke max. 215 mm, operating pressure max. 290 bar, follow-up time 54 ms, equipment: cnc backlash, 4-axis, laser safety device, control, make delim, type da69
de:
cnc-abkantpresse (5302), fabr. trumpf, typ trumabend v50, bj. 2002, ser.-nr. b0101a0006, fabr.-nr. f1011f, arbeitsbreite max. 1.000 mm, presskraft max. 500 kn, hub max. 215 mm, betriebsdruck max. 290 bar, nachlaufzeit 54 ms, ausstattung: cnc-hinteranlschlag, 4-achsig, laser-sicherheitseinrichtung, steuerung, fabr. delim, typ da69
 FABR.-NO. F1011F, WORKING WIDTH MAX. 1,000 MM, CAP. 500 KN, STROKE MAX. 215 MM, OPERATING PRESSURE MAX. 290 BAR, FOLLOW-UP TIME 54 MS, EQUIPMENT: CNC BACKLASH, 4-AXIS, LASER SAFETY DEVICE, CONTROL, MAKE DELIM, TYPE DA69 DE: CNC-ABKANTPRESSE (5302), FABR. TRUMPF, TYP TRUMABEND V50, BJ. 2002, SER.-NR. B0101A0006, FABR.-NR. F1011F, ARBEITSBREITE MAX. 1.000 MM, PRESSKRAFT MAX. 500 KN, HUB MAX. 215 MM, BETRIEBSDRUCK MAX. 290 BAR, NACHLAUFZEIT 54 MS, AUSSTATTUNG: CNC-HINTERANLSCHLAG, 4-ACHSIG, LASER-SICHERHEITSEINRICHTUNG, STEUERUNG, FABR. DELIM, TYP DA69
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-pressure:        t<br/>chamfer lenght:  mm<br/>distance between columns:        mm<br/>--------------------------------------------------:  <br/>working range press brake:  <br/>- total force (nominal):    200 to<br/>- working length:   3100 mm<br/>- distance between columns:   2550 mm<br/>bending beam (y-axis):  <br/>- stroke:    200 mm<br/>electrical specifications:  <br/>- total power consumption:     15 kw<br/>dimensions / weights:  <br/>- space requirements -left/right-:   4550 mm<br/>- space requirements -front/back-:   2250 mm<br/>- total height:   2860 mm<br/><br/><br/><br/><br/> PRESSURE: T
CHAMFER LENGHT: MM
DISTANCE BETWEEN COLUMNS: MM
--------------------------------------------------:
WORKING RANGE PRESS BRAKE:
- TOTAL FORCE (NOMINAL): 200 TO
- WORKING LENGTH: 3100 MM
- DISTANCE BETWEEN COLUMNS: 2550 MM
BENDING BEAM (Y-AXIS):
- STROKE: 200 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 15 KW
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 4550 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 2250 MM
- TOTAL HEIGHT: 2860 MM




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-mfg.-no. f1031f, width max. 4,000 mm, cap. 2,300 kg, stroke 445 mm, pressure max. 300 bar, speed max. 95 m/s, machine weight 19,200 kg, cnc-controlled backgauge, 6-axis, autom. bending aid, laser safety devices, control trumpf type tasc 6000, operating hours 26787.
de:
cnc-abkantpresse, fabr. trumpf, typ trubend 5230, bj. 2008, ser.-nr. b0508a0153, fabr.-nr. f1031f, arbeitsbreite max. 4.000 mm, presskraft max. 2.300 kg, hub max. 445 mm, betriebsdruck max. 300 bar, nachlaufzeit max. 95 ms, maschinengewicht 19.200 kg, ausstattung: cnc-gesteuerter hinteranschlag, 6-achsig, autom. biegehilfe, laser-sicherheitseinrichtungen, steuerung, fabr. trumpf, typ tasc 6000, abgel. betriebsstd. maschine ein 26787, laufzeit hydraulik 12223, laufzeit pressbalken 1672, zyklenpressbalken 1453092, laufzeit bombierung 193, zyklenbombierung 411603
 MFG.-NO. F1031F, WIDTH MAX. 4,000 MM, CAP. 2,300 KG, STROKE 445 MM, PRESSURE MAX. 300 BAR, SPEED MAX. 95 M/S, MACHINE WEIGHT 19,200 KG, CNC-CONTROLLED BACKGAUGE, 6-AXIS, AUTOM. BENDING AID, LASER SAFETY DEVICES, CONTROL TRUMPF TYPE TASC 6000, OPERATING HOURS 26787. DE: CNC-ABKANTPRESSE, FABR. TRUMPF, TYP TRUBEND 5230, BJ. 2008, SER.-NR. B0508A0153, FABR.-NR. F1031F, ARBEITSBREITE MAX. 4.000 MM, PRESSKRAFT MAX. 2.300 KG, HUB MAX. 445 MM, BETRIEBSDRUCK MAX. 300 BAR, NACHLAUFZEIT MAX. 95 MS, MASCHINENGEWICHT 19.200 KG, AUSSTATTUNG: CNC-GESTEUERTER HINTERANSCHLAG, 6-ACHSIG, AUTOM. BIEGEHILFE, LASER-SICHERHEITSEINRICHTUNGEN, STEUERUNG, FABR. TRUMPF, TYP TASC 6000, ABGEL. BETRIEBSSTD. MASCHINE EIN 26787, LAUFZEIT HYDRAULIK 12223, LAUFZEIT PRESSBALKEN 1672, ZYKLENPRESSBALKEN 1453092, LAUFZEIT BOMBIERUNG 193, ZYKLENBOMBIERUNG 411603
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-weight approx.: 30000 kg<br/>pressure: 150 to<br/>pressing length: 8550 mm<br/>distance between columns: 7050 mm<br/>stroke: 230 mm<br/>control: kvara - kvr 2002 pc001 - <br/>dimensions (l x w x h) approx.: 9000 x 2500 x 2400 mm<br/>total power requirement: 15 kw<br/>description: <h3>novastilmec shp 150/85 press brake</h3> <br> <b>technical data</b><br> - series: synchronised<br> - model: shp 150 / 85<br> - kvara cnc system: kvr 2002 pc001<br> - max. tonnage: 150 t<br> - bend length: 8550 mm<br> - width between uprights: 7050 mm<br> - gap: 850 mm<br> - adjustable stroke: 230 mm<br> - down stroke speed: 2/10 mm/s<br> - return speed: 100 mm/s<br> - distance between ram and bed: 430 mm<br> - bed hight: approx. 1000 mm<br> <br> <b>general data</b><br> - power: 15 kw<br> - voltage: 400 v<br> - current: 45 a<br> - frequency: 50 hz<br> - protection class: ip 55<br> WEIGHT APPROX.: 30000 KG
PRESSURE: 150 TO
PRESSING LENGTH: 8550 MM
DISTANCE BETWEEN COLUMNS: 7050 MM
STROKE: 230 MM
CONTROL: KVARA - KVR 2002 PC001 -
DIMENSIONS (L X W X H) APPROX.: 9000 X 2500 X 2400 MM
TOTAL POWER REQUIREMENT: 15 KW
DESCRIPTION:

NOVASTILMEC SHP 150/85 PRESS BRAKE


TECHNICAL DATA
- SERIES: SYNCHRONISED
- MODEL: SHP 150 / 85
- KVARA CNC SYSTEM: KVR 2002 PC001
- MAX. TONNAGE: 150 T
- BEND LENGTH: 8550 MM
- WIDTH BETWEEN UPRIGHTS: 7050 MM
- GAP: 850 MM
- ADJUSTABLE STROKE: 230 MM
- DOWN STROKE SPEED: 2/10 MM/S
- RETURN SPEED: 100 MM/S
- DISTANCE BETWEEN RAM AND BED: 430 MM
- BED HIGHT: APPROX. 1000 MM

GENERAL DATA
- POWER: 15 KW
- VOLTAGE: 400 V
- CURRENT: 45 A
- FREQUENCY: 50 HZ
- PROTECTION CLASS: IP 55
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mfg..-no. f1022f, width max. 2,000 mm, cap. 850 kn, stroke max. 215 mm, operating pressure max. 300 bar, follow-up time 95 m/s, machine weight 7,300 kg, cnc-controlled backgauge, 4-axis, safety light barrier, control trumpf type tasc6000, operating hours 34212
de:
cnc-abkantpresse, fabr. trumpf, typ trubend 5085, bj. 2008, ser.-nr. b0502a0383, fabr.-nr. f1022f, arbeitsbreite max. 2.000 mm, presskraft 850 kn,hub max. 215 mm, betriebsdruck max. 300 bar, nachlaufzeit 95 ms, maschinengewicht 7.300 kg, ausstattung: cnc-gesteuerter hinteranschlag, 4-achsig, sicherheitslichtschranke, steuerung, fabr. trumpf, typ tasc6000, abgel. betriebsstd. maschine ein 34212, laufzeit hydraulik 16564, laufzeit pressbalken 3186, zyklenpressbalken 3072963, laufzeit bombierung 302, zyklenbombierung 540736
 MFG..-NO. F1022F, WIDTH MAX. 2,000 MM, CAP. 850 KN, STROKE MAX. 215 MM, OPERATING PRESSURE MAX. 300 BAR, FOLLOW-UP TIME 95 M/S, MACHINE WEIGHT 7,300 KG, CNC-CONTROLLED BACKGAUGE, 4-AXIS, SAFETY LIGHT BARRIER, CONTROL TRUMPF TYPE TASC6000, OPERATING HOURS 34212 DE: CNC-ABKANTPRESSE, FABR. TRUMPF, TYP TRUBEND 5085, BJ. 2008, SER.-NR. B0502A0383, FABR.-NR. F1022F, ARBEITSBREITE MAX. 2.000 MM, PRESSKRAFT 850 KN,HUB MAX. 215 MM, BETRIEBSDRUCK MAX. 300 BAR, NACHLAUFZEIT 95 MS, MASCHINENGEWICHT 7.300 KG, AUSSTATTUNG: CNC-GESTEUERTER HINTERANSCHLAG, 4-ACHSIG, SICHERHEITSLICHTSCHRANKE, STEUERUNG, FABR. TRUMPF, TYP TASC6000, ABGEL. BETRIEBSSTD. MASCHINE EIN 34212, LAUFZEIT HYDRAULIK 16564, LAUFZEIT PRESSBALKEN 3186, ZYKLENPRESSBALKEN 3072963, LAUFZEIT BOMBIERUNG 302, ZYKLENBOMBIERUNG 540736
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-tonnage approx.: 85 ton bending length approx.: 2050 mm stroke: 215 mm distance between the columns: 1.750 mm working hours machine: 50000 h control: delem  TONNAGE APPROX.: 85 TON BENDING LENGTH APPROX.: 2050 MM STROKE: 215 MM DISTANCE BETWEEN THE COLUMNS: 1.750 MM WORKING HOURS MACHINE: 50000 H CONTROL: DELEM
Vendedor: PTF Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-cnc-abkantpresse (5301), fabr. trumpf trumabend v130, type, bj. 1998, masch.-nr. 885413, fabr.-nr. f1014f, maschinengewicht, nennpresskraft 1,300 12,950 kg kn, hub max. 365 mm, betriebsdruck max. 340 bar, nachlaufzeit 57 ms, 91 mm sicherheitsabstand, anschlussleistung, arbeitsbreite 23.0 kva max. 3,000 mm, ausstattungsmerkmale: 6-achs-maschine, cnc-steuerung, biegehilfe, winkelsensorik, fabr. de borja, type da69, abgel. betriebsstd. 29,712
   CNC-ABKANTPRESSE (5301), FABR. TRUMPF TRUMABEND V130, TYPE, BJ. 1998, MASCH.-NR. 885413, FABR.-NR. F1014F, MASCHINENGEWICHT, NENNPRESSKRAFT 1,300 12,950 KG KN, HUB MAX. 365 MM, BETRIEBSDRUCK MAX. 340 BAR, NACHLAUFZEIT 57 MS, 91 MM SICHERHEITSABSTAND, ANSCHLUSSLEISTUNG, ARBEITSBREITE 23.0 KVA MAX. 3,000 MM, AUSSTATTUNGSMERKMALE: 6-ACHS-MASCHINE, CNC-STEUERUNG, BIEGEHILFE, WINKELSENSORIK, FABR. DE BORJA, TYPE DA69, ABGEL. BETRIEBSSTD. 29,712
Vendedor: Hilco
Año de construcción: usado
Precio: used machinery auction RESALE 29.000 €
Ubicación: Land-weight approx.: 14000 kg<br/>dimensions (l x w x h) approx.: 5100 x 1500 x 2800 mm<br/>description: - serial number: 21291<br> - pressure force: 240 t<br> - bending length: 4100 mm<br> - stroke: 260 mm<br> - motor power: 22kw<br> - voltage: 400 v<br> - oil tank contents: 210 l<br> - distance between uprights: 3550 mm<br> - installation height: 530 mm<br> - outreach: 410 mm<br> - table height: 885 mm<br> - table width 240 mm<br> - operating hours: 4153 h<br> <br> accessories:<br> y1 / y2 / x / r via cnc-controlled<br> control delem da-66 t<br> tool clamping promecam manual on top<br> tool clamping manual at the bottom (die block holder)<br> fiessler safety device<br> safety doors<br> crowning motor-driven<br> die adjustment manual<br> <br> tools:<br> 1 x divided upper tool type 11.230, r=0.8/85°, h=105, max 1000 kn/m<br> 1 x multi v-die with v=12,14,26,38,60,100 mm<br> WEIGHT APPROX.: 14000 KG
DIMENSIONS (L X W X H) APPROX.: 5100 X 1500 X 2800 MM
DESCRIPTION: - SERIAL NUMBER: 21291
- PRESSURE FORCE: 240 T
- BENDING LENGTH: 4100 MM
- STROKE: 260 MM
- MOTOR POWER: 22KW
- VOLTAGE: 400 V
- OIL TANK CONTENTS: 210 L
- DISTANCE BETWEEN UPRIGHTS: 3550 MM
- INSTALLATION HEIGHT: 530 MM
- OUTREACH: 410 MM
- TABLE HEIGHT: 885 MM
- TABLE WIDTH 240 MM
- OPERATING HOURS: 4153 H

ACCESSORIES:
Y1 / Y2 / X / R VIA CNC-CONTROLLED
CONTROL DELEM DA-66 T
TOOL CLAMPING PROMECAM MANUAL ON TOP
TOOL CLAMPING MANUAL AT THE BOTTOM (DIE BLOCK HOLDER)
FIESSLER SAFETY DEVICE
SAFETY DOORS
CROWNING MOTOR-DRIVEN
DIE ADJUSTMENT MANUAL

TOOLS:
1 X DIVIDED UPPER TOOL TYPE 11.230, R=0.8/85°, H=105, MAX 1000 KN/M
1 X MULTI V-DIE WITH V=12,14,26,38,60,100 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-type of machine: pressbrake.
manufacturer: megobal.
model: pb 2035.
year of construction: 1998.
condition: very good,.
type of offer: used machine,
     ,.	
technical data:.
performance in mm: 2000 mm x 35 t,.
drive type: el / hydr.,.
drive: 4,5 kw.
comment:.
incl. tool and el. back gauge.
weight: 2900 kg,
     ,.
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location.,.
     ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE: PRESSBRAKE. MANUFACTURER: MEGOBAL. MODEL: PB 2035. YEAR OF CONSTRUCTION: 1998. CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. PERFORMANCE IN MM: 2000 MM X 35 T,. DRIVE TYPE: EL / HYDR.,. DRIVE: 4,5 KW. COMMENT:. INCL. TOOL AND EL. BACK GAUGE. WEIGHT: 2900 KG, ,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 21.500 €
Ubicación: Land-weight approx.: 12950 kg<br/>dimensions (l x w x h) approx.: 2210 x 3640 x 2885 mm<br/>description: - serial number.: 885446<br> - operating hours: 79700 h<br> - pressure force: 1300 kn<br> - bending length: 3060 mm<br> - installation height: 535 mm<br> - stroke: 365 mm<br> - distance between uprights: 2690 mm<br> - upright outreach: 410 mm<br> - table height: 1050 mm<br> - table width: 120 mm<br> - connected load: 23 kva<br> - oil contents: 250 l<br> - rapid traverse: 200 mm/s<br> - working speed: 1-10 mm/s<br> - withdrawal speed: 135 mm/s<br> - speed x-axis: 500 mm/s<br> - speed r-axis: 300 mm/s<br> - speed z-axis: 1000 mm/s<br> - positioning accuracy y-axis: 0.01 mm<br> - positioining accuracy x-axis: 0.04 mm<br> - positioning accuracy r-axis: 0,08 mm<br> - positioniergenauigkeit z-axis: 0,06 mm<br> - travel x-axis: 600 mm<br> - travel r-axis: 250 mm<br> - travel z-axis: 2310 mm<br> - inclination: +/- 10 mm<br> <br> accessories:<br> control delem da 65t cnc<br> 4 axes backgauge<br> bend guard<br> support console<br> wila tool clamping on top and at the bottom<br> lazer safe<br> safety doors<br> crowning motor-driven<br> die movement pneumatic<br> bending aid available<br> WEIGHT APPROX.: 12950 KG
DIMENSIONS (L X W X H) APPROX.: 2210 X 3640 X 2885 MM
DESCRIPTION: - SERIAL NUMBER.: 885446
- OPERATING HOURS: 79700 H
- PRESSURE FORCE: 1300 KN
- BENDING LENGTH: 3060 MM
- INSTALLATION HEIGHT: 535 MM
- STROKE: 365 MM
- DISTANCE BETWEEN UPRIGHTS: 2690 MM
- UPRIGHT OUTREACH: 410 MM
- TABLE HEIGHT: 1050 MM
- TABLE WIDTH: 120 MM
- CONNECTED LOAD: 23 KVA
- OIL CONTENTS: 250 L
- RAPID TRAVERSE: 200 MM/S
- WORKING SPEED: 1-10 MM/S
- WITHDRAWAL SPEED: 135 MM/S
- SPEED X-AXIS: 500 MM/S
- SPEED R-AXIS: 300 MM/S
- SPEED Z-AXIS: 1000 MM/S
- POSITIONING ACCURACY Y-AXIS: 0.01 MM
- POSITIOINING ACCURACY X-AXIS: 0.04 MM
- POSITIONING ACCURACY R-AXIS: 0,08 MM
- POSITIONIERGENAUIGKEIT Z-AXIS: 0,06 MM
- TRAVEL X-AXIS: 600 MM
- TRAVEL R-AXIS: 250 MM
- TRAVEL Z-AXIS: 2310 MM
- INCLINATION: +/- 10 MM

ACCESSORIES:
CONTROL DELEM DA 65T CNC
4 AXES BACKGAUGE
BEND GUARD
SUPPORT CONSOLE
WILA TOOL CLAMPING ON TOP AND AT THE BOTTOM
LAZER SAFE
SAFETY DOORS
CROWNING MOTOR-DRIVEN
DIE MOVEMENT PNEUMATIC
BENDING AID AVAILABLE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 599 €
Ubicación: Land-
used durchgã¤niges bending tool for press brake jonescheit
this auction is only the upper tool, which is marked with the letter "e".
length: ca. 1375mm

other lengths on request.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)   
   


 USED DURCHG&ATILDE;&CURREN;NIGES BENDING TOOL FOR PRESS BRAKE JONESCHEIT THIS AUCTION IS ONLY THE UPPER TOOL, WHICH IS MARKED WITH THE LETTER "E". LENGTH: CA. 1375MM OTHER LENGTHS ON REQUEST. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-pressure:230 t<br/>chamfer lenght:4050 mm<br/>distance between columns:3550 mm<br/>slide stroke:250 mm<br/>throat:305 mm<br/>distance table/ram:min. 250 - max. 500 mm<br/>stroke speed - idle:max. 140 mm/sec.<br/>pressing speed:max. 9 mm/sec.<br/>storke speed - withdrawal:max. 140 mm/sec.<br/>total power requirement:18,5 kw<br/>safety distance:min. 108 mm<br/>slowing-down time:44 ms<br/>tracking travel:4 mm<br/>oil volume:250 l<br/>weight of the machine ca.:16,5 t<br/>dimensions of the machine ca.:6200 x 3290 x 2800 mm<br/><br/>pressure in the hydraulic system: max. 280 bar pressure in the pneumatic system: 6 +/- 1 bar operating voltage: 3x 400v / pe / 50 hz rated current of main fuse: max. 63 a connection cable: 25.5 kva  - only 2085 operating hours !! - without tools! - lasersafe / lazersafe can be used up to max. upper die height 440 mm. - documentation - backgauge cnc controlled x and r axis with freely programmable and thus infinitely adjustable stop depth and height for high accuracy - upper tool clamping 26mm, manual - lower tool clamping 13mm, manual - crowning cnc in the table  stop system x / r: - rear stop (stop carrier adjustment) stroke area x axis (from bend line): 5-1000 mm adjustment speed x-axis: max. 500 mm / sec. drive power x-axis: 1.0 kw - height adjustment (adjustment via servomotor r-axis) adjustment range r-axis (from table surface): 25-175 mm plant speed r axis: max. 150 mm / sec. drive power r-axis: 1.0 kw PRESSURE:230 T
CHAMFER LENGHT:4050 MM
DISTANCE BETWEEN COLUMNS:3550 MM
SLIDE STROKE:250 MM
THROAT:305 MM
DISTANCE TABLE/RAM:MIN. 250 - MAX. 500 MM
STROKE SPEED - IDLE:MAX. 140 MM/SEC.
PRESSING SPEED:MAX. 9 MM/SEC.
STORKE SPEED - WITHDRAWAL:MAX. 140 MM/SEC.
TOTAL POWER REQUIREMENT:18,5 KW
SAFETY DISTANCE:MIN. 108 MM
SLOWING-DOWN TIME:44 MS
TRACKING TRAVEL:4 MM
OIL VOLUME:250 L
WEIGHT OF THE MACHINE CA.:16,5 T
DIMENSIONS OF THE MACHINE CA.:6200 X 3290 X 2800 MM

PRESSURE IN THE HYDRAULIC SYSTEM: MAX. 280 BAR PRESSURE IN THE PNEUMATIC SYSTEM: 6 +/- 1 BAR OPERATING VOLTAGE: 3X 400V / PE / 50 HZ RATED CURRENT OF MAIN FUSE: MAX. 63 A CONNECTION CABLE: 25.5 KVA - ONLY 2085 OPERATING HOURS !! - WITHOUT TOOLS! - LASERSAFE / LAZERSAFE CAN BE USED UP TO MAX. UPPER DIE HEIGHT 440 MM. - DOCUMENTATION - BACKGAUGE CNC CONTROLLED X AND R AXIS WITH FREELY PROGRAMMABLE AND THUS INFINITELY ADJUSTABLE STOP DEPTH AND HEIGHT FOR HIGH ACCURACY - UPPER TOOL CLAMPING 26MM, MANUAL - LOWER TOOL CLAMPING 13MM, MANUAL - CROWNING CNC IN THE TABLE STOP SYSTEM X / R: - REAR STOP (STOP CARRIER ADJUSTMENT) STROKE AREA X AXIS (FROM BEND LINE): 5-1000 MM ADJUSTMENT SPEED X-AXIS: MAX. 500 MM / SEC. DRIVE POWER X-AXIS: 1.0 KW - HEIGHT ADJUSTMENT (ADJUSTMENT VIA SERVOMOTOR R-AXIS) ADJUSTMENT RANGE R-AXIS (FROM TABLE SURFACE): 25-175 MM PLANT SPEED R AXIS: MAX. 150 MM / SEC. DRIVE POWER R-AXIS: 1.0 KW
Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-prism "d"

a used prism for a press brake, which is marked with the letter "d".
cross section approx.: 38 mm x 38 mm
length approx.: 1370 mm
prism: 2 pieces: opening width: approx. 8 mm
1 piece: opening width: approx. 10 mm contact person mr. mueller shows our over 200 more offers to.

(changes and errors in the technical data, information
and prices and subject to prior sale!)   
    PRISM "D" A USED PRISM FOR A PRESS BRAKE, WHICH IS MARKED WITH THE LETTER "D". CROSS SECTION APPROX.: 38 MM X 38 MM LENGTH APPROX.: 1370 MM PRISM: 2 PIECES: OPENING WIDTH: APPROX. 8 MM 1 PIECE: OPENING WIDTH: APPROX. 10 MM CONTACT PERSON MR. MUELLER SHOWS OUR OVER 200 MORE OFFERS TO. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-pressure:  t<br/>chamfer lenght:  mm<br/>distance between columns:  mm<br/>--------------------------------------------------:  <br/>working range press brake:  <br/>- total force (nominal):    200 to<br/>bending beam (y-axis):  <br/>- stroke:    210 mm<br/>dimensions / weights:  <br/>- space requirements -left/right-:   2250 mm<br/>- space requirements -front/back-:   5100 mm<br/>- total height:   2900 mm<br/>- total weight approx.:  14000 kg<br/><br/><br/><br/><br/> PRESSURE: T
CHAMFER LENGHT: MM
DISTANCE BETWEEN COLUMNS: MM
--------------------------------------------------:
WORKING RANGE PRESS BRAKE:
- TOTAL FORCE (NOMINAL): 200 TO
BENDING BEAM (Y-AXIS):
- STROKE: 210 MM
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 2250 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 5100 MM
- TOTAL HEIGHT: 2900 MM
- TOTAL WEIGHT APPROX.: 14000 KG




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-hartmann presse mod. acp-u-e64-1250-me / bj 68-2003 / 64 t / 260 bar / table 1250 mm / height 500 / hub 250 / 300 stand projection / 7.5 kw / digital mod. dnc 60 / akas security system / good condition
fe.gi.maschinen.sbg.at

hartmann press mod. acp-u-e64-1250-me / year 68 2003 / 64 t / 260 bar / table 1250 mm / install height 500 stroke 250 stator projection 300 / 7.5 kw / digital mod. dnc 60 / / akas safety system / good condition fe.gi.maschinen.sbg.at HARTMANN PRESSE MOD. ACP-U-E64-1250-ME / BJ 68-2003 / 64 T / 260 BAR / TABLE 1250 MM / HEIGHT 500 / HUB 250 / 300 STAND PROJECTION / 7.5 KW / DIGITAL MOD. DNC 60 / AKAS SECURITY SYSTEM / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT HARTMANN PRESS MOD. ACP-U-E64-1250-ME / YEAR 68 2003 / 64 T / 260 BAR / TABLE 1250 MM / INSTALL HEIGHT 500 STROKE 250 STATOR PROJECTION 300 / 7.5 KW / DIGITAL MOD. DNC 60 / / AKAS SAFETY SYSTEM / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-pressure:        t<br/>chamfer lenght:  mm<br/>distance between columns:        mm<br/>--------------------------------------------------:  <br/>working range press brake:  <br/>- total force (nominal):    120 to<br/>- working length:   3050 mm<br/>bending beam (y-axis):  <br/>- stroke:    175 mm<br/>attachments -press brake-:  <br/>- european ce standards: yes:        <br/>electrical specifications:  <br/>- total power consumption:     15 kw<br/>dimensions / weights:  <br/>- space requirements -left/right-:   4250 mm<br/>- space requirements -front/back-:   2170 mm<br/>- total height:   2800 mm<br/>- total weight approx.:   9500 kg<br/><br/><br/><br/><br/> PRESSURE: T
CHAMFER LENGHT: MM
DISTANCE BETWEEN COLUMNS: MM
--------------------------------------------------:
WORKING RANGE PRESS BRAKE:
- TOTAL FORCE (NOMINAL): 120 TO
- WORKING LENGTH: 3050 MM
BENDING BEAM (Y-AXIS):
- STROKE: 175 MM
ATTACHMENTS -PRESS BRAKE-:
- EUROPEAN CE STANDARDS: YES:
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 15 KW
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 4250 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 2170 MM
- TOTAL HEIGHT: 2800 MM
- TOTAL WEIGHT APPROX.: 9500 KG




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-press brake hamudu

bending length: 3.200 mm
capacity: 100 ton
 	 
trailing stop: 450 mm
stroke length: 120 mm
 	 
throat depth: 320 mm
stand width: 2600 mm
 	 
equipped with:
	-page + back protection
 	-foot pedal
 	-set tools
 	-operating instructions
 	 
country of origin: belgium
engine power: 7,5 kw
machine lxwxh: 3500 x 1600 x 2300 mm
machine weight: 6,500 kg
 PRESS BRAKE HAMUDU BENDING LENGTH: 3.200 MM CAPACITY: 100 TON TRAILING STOP: 450 MM STROKE LENGTH: 120 MM THROAT DEPTH: 320 MM STAND WIDTH: 2600 MM EQUIPPED WITH: -PAGE + BACK PROTECTION -FOOT PEDAL -SET TOOLS -OPERATING INSTRUCTIONS COUNTRY OF ORIGIN: BELGIUM ENGINE POWER: 7,5 KW MACHINE LXWXH: 3500 X 1600 X 2300 MM MACHINE WEIGHT: 6,500 KG
Vendedor: Valk Machines B.V.
Año de construcción: usado
Ubicación: Land-sheet width: 3050 mm<br/>plate thickness: 4 mm<br/>distance between columns: 3080 mm<br/>control: siemens s7 <br/>bending angle max.: 130 °<br/>upper clamping stroke: 300 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 6,2 t<br/>dimensions of the machine ca.:  m<br/>ce signed:  <br/>electric 400 volt:  <br/>cnc-back gauge: 1000 mm<br/>crowning system:  <br/>cnc control with touchscreen:  <br/>automatic tool clamping: oben <br/>foot switch:  <br/>upper tool: 45 °<br/>the modern full hydraulic bending machine is the ideal solution for reliable, <br/>fast and precise bending. extremely versatile, flexible and easy to use.<br/>-    hydraulically driven upper and bending beam<br/>-    pointed upper beam rail 45 degrees<br/>-    rails of upper, lower and bending beam interchangeable<br/>-    operating panel with:<br/>     ?    indication of bending angle<br/>     ?    pre selection of bending angle<br/>     ?    tipp switch to operate upper and bending beam » automatic mode<br/>-    control system: plc - siemens - s7<br/>-    foot switch for manual and automatic operation ce ?certificate<br/>-    safety stop at approx. 25 mm upper beam height<br/>-    dynamic hydraulic camber - patented (with this dynamic hydraulic camber <br/>system it is possible to achieve a very good bending result over the full <br/>length. conventional systems are only able to bend specific sheets at specific <br/>angles with a specific mechanical camber. this new dynamic hydraulic camber <br/>allows you to bend any angle ?<br/>-    motor-controlled back gauge (1000 mm) with electronic position indicator <br/>of the back gauge. an easily manageable control panel allows to setting the <br/>desired back gauge value precisely. the back gauge adjusts accordingly. if you <br/>want to make many different bending and save time by eliminating manual <br/>measuring, we recommend this option.<br/>-    touchscreen: selection of back gauge values and bending angle with a <br/>microprocessor for the selection and storing of de up to 8 positions of the <br/>back gauge and up to 8 angles per bending part. it is possible to store up to <br/>999 bending parts (= 8 values for back gauge position and 8 values for bending <br/>angles) and recall of values via quick selection. the bending machine then <br/>operates the working steps automatically for each selected profile.<br/>-    automatic tool clamping: 7 simplify the changing of upper beam tools. with <br/>automatic clamping you loosen and fasten all your upper beam tools on the push <br/>of a button. you will change your tools at record speed.<br/><br/>unused hydraulic folding machine with special price.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> SHEET WIDTH: 3050 MM
PLATE THICKNESS: 4 MM
DISTANCE BETWEEN COLUMNS: 3080 MM
CONTROL: SIEMENS S7
BENDING ANGLE MAX.: 130 °
UPPER CLAMPING STROKE: 300 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 6,2 T
DIMENSIONS OF THE MACHINE CA.: M
CE SIGNED:
ELECTRIC 400 VOLT:
CNC-BACK GAUGE: 1000 MM
CROWNING SYSTEM:
CNC CONTROL WITH TOUCHSCREEN:
AUTOMATIC TOOL CLAMPING: OBEN
FOOT SWITCH:
UPPER TOOL: 45 °
THE MODERN FULL HYDRAULIC BENDING MACHINE IS THE IDEAL SOLUTION FOR RELIABLE,
FAST AND PRECISE BENDING. EXTREMELY VERSATILE, FLEXIBLE AND EASY TO USE.
- HYDRAULICALLY DRIVEN UPPER AND BENDING BEAM
- POINTED UPPER BEAM RAIL 45 DEGREES
- RAILS OF UPPER, LOWER AND BENDING BEAM INTERCHANGEABLE
- OPERATING PANEL WITH:
? INDICATION OF BENDING ANGLE
? PRE SELECTION OF BENDING ANGLE
? TIPP SWITCH TO OPERATE UPPER AND BENDING BEAM » AUTOMATIC MODE
- CONTROL SYSTEM: PLC - SIEMENS - S7
- FOOT SWITCH FOR MANUAL AND AUTOMATIC OPERATION CE ?CERTIFICATE
- SAFETY STOP AT APPROX. 25 MM UPPER BEAM HEIGHT
- DYNAMIC HYDRAULIC CAMBER - PATENTED (WITH THIS DYNAMIC HYDRAULIC CAMBER
SYSTEM IT IS POSSIBLE TO ACHIEVE A VERY GOOD BENDING RESULT OVER THE FULL
LENGTH. CONVENTIONAL SYSTEMS ARE ONLY ABLE TO BEND SPECIFIC SHEETS AT SPECIFIC
ANGLES WITH A SPECIFIC MECHANICAL CAMBER. THIS NEW DYNAMIC HYDRAULIC CAMBER
ALLOWS YOU TO BEND ANY ANGLE ?
- MOTOR-CONTROLLED BACK GAUGE (1000 MM) WITH ELECTRONIC POSITION INDICATOR
OF THE BACK GAUGE. AN EASILY MANAGEABLE CONTROL PANEL ALLOWS TO SETTING THE
DESIRED BACK GAUGE VALUE PRECISELY. THE BACK GAUGE ADJUSTS ACCORDINGLY. IF YOU
WANT TO MAKE MANY DIFFERENT BENDING AND SAVE TIME BY ELIMINATING MANUAL
MEASURING, WE RECOMMEND THIS OPTION.
- TOUCHSCREEN: SELECTION OF BACK GAUGE VALUES AND BENDING ANGLE WITH A
MICROPROCESSOR FOR THE SELECTION AND STORING OF DE UP TO 8 POSITIONS OF THE
BACK GAUGE AND UP TO 8 ANGLES PER BENDING PART. IT IS POSSIBLE TO STORE UP TO
999 BENDING PARTS (= 8 VALUES FOR BACK GAUGE POSITION AND 8 VALUES FOR BENDING
ANGLES) AND RECALL OF VALUES VIA QUICK SELECTION. THE BENDING MACHINE THEN
OPERATES THE WORKING STEPS AUTOMATICALLY FOR EACH SELECTED PROFILE.
- AUTOMATIC TOOL CLAMPING: 7 SIMPLIFY THE CHANGING OF UPPER BEAM TOOLS. WITH
AUTOMATIC CLAMPING YOU LOOSEN AND FASTEN ALL YOUR UPPER BEAM TOOLS ON THE PUSH
OF A BUTTON. YOU WILL CHANGE YOUR TOOLS AT RECORD SPEED.

UNUSED HYDRAULIC FOLDING MACHINE WITH SPECIAL PRICE.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-model tad servo 170 t / 3200 mm

stock machine/demonstration machine special price

linear cnc measurement for the deep y1-y2
esa 630, 2d graphical cnc control, 15 "touch
cnc x-r back gauge on ball screws
cnc controlled hydraulic crowning
1 set of upper tools hp, 135-85-r =.8, 3 x 835 + 1 x 805 1 set divided sub-tools or assistants rolleri m460-r
ce system unit akasâ®

control
esa 650w, 2d graphical control with automatic bend sequence calculation, 15-inch touch-screen, incl. remote assistance via teamviewer
 	
backgauge
2-axis cnc rear stop x-r
 	
drive
servo drive energy savings of up to 50%
extra high speed 200 mm / s and
 	

lower tool holder
small narrow table, width 60mm x height 110mm
 	

front auflegearme
2 heavy auflegearme on linearfã»hrung, adjustable in height with handwheel + parking l + r
	
upper tool holder
manual fast clamping up

MODEL TAD SERVO 170 T / 3200 MM STOCK MACHINE/DEMONSTRATION MACHINE SPECIAL PRICE LINEAR CNC MEASUREMENT FOR THE DEEP Y1-Y2 ESA 630, 2D GRAPHICAL CNC CONTROL, 15 "TOUCH CNC X-R BACK GAUGE ON BALL SCREWS CNC CONTROLLED HYDRAULIC CROWNING 1 SET OF UPPER TOOLS HP, 135-85-R =.8, 3 X 835 + 1 X 805 1 SET DIVIDED SUB-TOOLS OR ASSISTANTS ROLLERI M460-R CE SYSTEM UNIT AKAS&ACIRC;® CONTROL ESA 650W, 2D GRAPHICAL CONTROL WITH AUTOMATIC BEND SEQUENCE CALCULATION, 15-INCH TOUCH-SCREEN, INCL. REMOTE ASSISTANCE VIA TEAMVIEWER BACKGAUGE 2-AXIS CNC REAR STOP X-R DRIVE SERVO DRIVE ENERGY SAVINGS OF UP TO 50% EXTRA HIGH SPEED 200 MM / S AND LOWER TOOL HOLDER SMALL NARROW TABLE, WIDTH 60MM X HEIGHT 110MM FRONT AUFLEGEARME 2 HEAVY AUFLEGEARME ON LINEARF&ATILDE;&RAQUO;HRUNG, ADJUSTABLE IN HEIGHT WITH HANDWHEEL + PARKING L + R UPPER TOOL HOLDER MANUAL FAST CLAMPING UP
Vendedor: VVB-Concept UG
Año de construcción: usado
Ubicación: Land-tool length - max.: 3200 mm<br/>floor-plate width: 3200 mm<br/>sheet thickness - max.: 6 mm<br/>stroke max.: 300 mm<br/>hollow: 400 mm<br/>angle: 0-135 °<br/>drive: 22,5 kw<br/>total power requirement:  kw<br/>weight of the machine ca.: 12 t<br/>dimensions of the machine ca.: 14,7x5,7x3,9 m<br/>an innovative bending machine with oscillating double table allows one<br/>fast, automatic and economical production of trapezoidal sheets for<br/>the shipbuilding.<br/><br/>the davi promau bending machine davi mfd (machine folding double) is rightly so<br/>referred to as novel: in essence, it resembles already known<br/>bending machines with oscillating table, but just in detail, the<br/>davi promaus machine has many innovative features on it, according to its <br/>manufacturer<br/>to higher performance than conventional bending machines<br/>it is possible. decisive here is the new concept of bending machine and<br/>automation. this unit is the basis for an fms bending system that<br/>exceptional production and reduced production costs<br/>guarantee. the mfd is mainly for the machining of medium sized<br/>and large sheets of mild steel designed. the clever bending mechanism<br/>with the possibility of the sheet in a single clamping both up and<br/>to bend downwards, allows the bending of parts of different<br/>sizes and masses. thanks to the two tables, the machine can immediately from one<br/>go over to the other bending type.<br/><br/>simplified sheet metal handling<br/>with a built-in table drehanipulator the sheet metal in all<br/>be rotated at any angle positions, such as the lateral edges<br/>to bend the sheet. the entire sheet movement takes place automatically. the<br/>the operator therefore only has to position the pallets with the raw sheet and <br/>the<br/>remove finished parts. so far required work steps like positioning<br/>or turning around and turning the sheet completely eliminated - an advantage, <br/>because<br/>just for turning the sheets, with often considerable sheet metal weight, were<br/>so far often multiple operators and / or a crane required, because even at<br/>the robot joint was able to achieve the required high<br/>do not apply torques for turning the metal sheets. the davi<br/>mfd bending machine was designed for two-sided bending of up to 4,100 mm long<br/>and 8 mm thick sheets. with the drehanipulator can<br/>sheet metal plates automatically rotated in all directions without operator <br/>intervention<br/>become.<br/><br/>market success<br/>the bending machine has, according to davi promau in various markets, such as <br/>in the<br/>united states and northern europe, already well received.<br/>she is valued mainly because of her reduced personnel expenses, the<br/>short cycle times and above all because of the great flexibility that over the<br/>software allows the transition from one bending angle to another, without<br/>that die or bending tool must be changed. according to davi it ??is<br/>mfd is an exclusive machine: »no other italian<br/>the manufacturer is currently producing similar machines, says the company. in<br/>europe is only a similar machine model produced in germany, the<br/>but only has an oscillating table (although this for the<br/>double function upper and lower table is usable). the bending machine is with<br/>oscillating double table and 9 cnc axes for machining up to 4,100 mm<br/>wide and 9 mm thick sheet metal plates equipped.<br/><br/>machine features<br/>both oscillating tables are equipped with a hold-down table, a rear<br/>support table and a manipulator for the positioning of the metal sheets<br/>fitted. it has collets for the exact positioning of the<br/>sheet metal plate under the bending tools. stephen lowe, product manager of<br/>manufacturer explains: »the main feature of this innovative unit lies<br/>in that the bend can be made up and down without<br/>that while the sheets, as in conventional bending presses, turned over by hand<br/>need to become. because of this advantage, the machine becomes a novelty in the<br/>bending sector represents, of many american and northern european<br/>companies. the davi mfd is designed for the production of thin and<br/>medium-strength structural steel products such as doors, cabinets,<br/>metal fixtures, shelves, kitchens, switchboards, etc., but also for<br/>6 to 8 mm thick kastenprofi le designed and was as flexible<br/>production system fms designed. the bending system has an automatic<br/>sheet feeder, a tafelvorschub- / turntable (manipulator) and a<br/>outfeed and stacking system for the discharge and subsequent stacking of<br/>finished sheet metal parts. the control is done with the nc system »genius«, <br/>that of<br/>davi promau was developed. in the fms version all can<br/>processing steps can be managed with this control, without a<br/>simulation of the duty cycle or a teach-in are required. this<br/>allows a much faster creation of the machine program. at<br/>thickness or material changes will be valuable set-up time for the<br/>machine saved, since neither the tools nor the collets of the manipulator<br/>have to be replaced.<br/><br/><br/><br/><br/><br/> TOOL LENGTH - MAX.: 3200 MM
FLOOR-PLATE WIDTH: 3200 MM
SHEET THICKNESS - MAX.: 6 MM
STROKE MAX.: 300 MM
HOLLOW: 400 MM
ANGLE: 0-135 °
DRIVE: 22,5 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 12 T
DIMENSIONS OF THE MACHINE CA.: 14,7X5,7X3,9 M
AN INNOVATIVE BENDING MACHINE WITH OSCILLATING DOUBLE TABLE ALLOWS ONE
FAST, AUTOMATIC AND ECONOMICAL PRODUCTION OF TRAPEZOIDAL SHEETS FOR
THE SHIPBUILDING.

THE DAVI PROMAU BENDING MACHINE DAVI MFD (MACHINE FOLDING DOUBLE) IS RIGHTLY SO
REFERRED TO AS NOVEL: IN ESSENCE, IT RESEMBLES ALREADY KNOWN
BENDING MACHINES WITH OSCILLATING TABLE, BUT JUST IN DETAIL, THE
DAVI PROMAUS MACHINE HAS MANY INNOVATIVE FEATURES ON IT, ACCORDING TO ITS
MANUFACTURER
TO HIGHER PERFORMANCE THAN CONVENTIONAL BENDING MACHINES
IT IS POSSIBLE. DECISIVE HERE IS THE NEW CONCEPT OF BENDING MACHINE AND
AUTOMATION. THIS UNIT IS THE BASIS FOR AN FMS BENDING SYSTEM THAT
EXCEPTIONAL PRODUCTION AND REDUCED PRODUCTION COSTS
GUARANTEE. THE MFD IS MAINLY FOR THE MACHINING OF MEDIUM SIZED
AND LARGE SHEETS OF MILD STEEL DESIGNED. THE CLEVER BENDING MECHANISM
WITH THE POSSIBILITY OF THE SHEET IN A SINGLE CLAMPING BOTH UP AND
TO BEND DOWNWARDS, ALLOWS THE BENDING OF PARTS OF DIFFERENT
SIZES AND MASSES. THANKS TO THE TWO TABLES, THE MACHINE CAN IMMEDIATELY FROM ONE
GO OVER TO THE OTHER BENDING TYPE.

SIMPLIFIED SHEET METAL HANDLING
WITH A BUILT-IN TABLE DREHANIPULATOR THE SHEET METAL IN ALL
BE ROTATED AT ANY ANGLE POSITIONS, SUCH AS THE LATERAL EDGES
TO BEND THE SHEET. THE ENTIRE SHEET MOVEMENT TAKES PLACE AUTOMATICALLY. THE
THE OPERATOR THEREFORE ONLY HAS TO POSITION THE PALLETS WITH THE RAW SHEET AND
THE
REMOVE FINISHED PARTS. SO FAR REQUIRED WORK STEPS LIKE POSITIONING
OR TURNING AROUND AND TURNING THE SHEET COMPLETELY ELIMINATED - AN ADVANTAGE,
BECAUSE
JUST FOR TURNING THE SHEETS, WITH OFTEN CONSIDERABLE SHEET METAL WEIGHT, WERE
SO FAR OFTEN MULTIPLE OPERATORS AND / OR A CRANE REQUIRED, BECAUSE EVEN AT
THE ROBOT JOINT WAS ABLE TO ACHIEVE THE REQUIRED HIGH
DO NOT APPLY TORQUES FOR TURNING THE METAL SHEETS. THE DAVI
MFD BENDING MACHINE WAS DESIGNED FOR TWO-SIDED BENDING OF UP TO 4,100 MM LONG
AND 8 MM THICK SHEETS. WITH THE DREHANIPULATOR CAN
SHEET METAL PLATES AUTOMATICALLY ROTATED IN ALL DIRECTIONS WITHOUT OPERATOR
INTERVENTION
BECOME.

MARKET SUCCESS
THE BENDING MACHINE HAS, ACCORDING TO DAVI PROMAU IN VARIOUS MARKETS, SUCH AS
IN THE
UNITED STATES AND NORTHERN EUROPE, ALREADY WELL RECEIVED.
SHE IS VALUED MAINLY BECAUSE OF HER REDUCED PERSONNEL EXPENSES, THE
SHORT CYCLE TIMES AND ABOVE ALL BECAUSE OF THE GREAT FLEXIBILITY THAT OVER THE
SOFTWARE ALLOWS THE TRANSITION FROM ONE BENDING ANGLE TO ANOTHER, WITHOUT
THAT DIE OR BENDING TOOL MUST BE CHANGED. ACCORDING TO DAVI IT ??IS
MFD IS AN EXCLUSIVE MACHINE: »NO OTHER ITALIAN
THE MANUFACTURER IS CURRENTLY PRODUCING SIMILAR MACHINES, SAYS THE COMPANY. IN
EUROPE IS ONLY A SIMILAR MACHINE MODEL PRODUCED IN GERMANY, THE
BUT ONLY HAS AN OSCILLATING TABLE (ALTHOUGH THIS FOR THE
DOUBLE FUNCTION UPPER AND LOWER TABLE IS USABLE). THE BENDING MACHINE IS WITH
OSCILLATING DOUBLE TABLE AND 9 CNC AXES FOR MACHINING UP TO 4,100 MM
WIDE AND 9 MM THICK SHEET METAL PLATES EQUIPPED.

MACHINE FEATURES
BOTH OSCILLATING TABLES ARE EQUIPPED WITH A HOLD-DOWN TABLE, A REAR
SUPPORT TABLE AND A MANIPULATOR FOR THE POSITIONING OF THE METAL SHEETS
FITTED. IT HAS COLLETS FOR THE EXACT POSITIONING OF THE
SHEET METAL PLATE UNDER THE BENDING TOOLS. STEPHEN LOWE, PRODUCT MANAGER OF
MANUFACTURER EXPLAINS: »THE MAIN FEATURE OF THIS INNOVATIVE UNIT LIES
IN THAT THE BEND CAN BE MADE UP AND DOWN WITHOUT
THAT WHILE THE SHEETS, AS IN CONVENTIONAL BENDING PRESSES, TURNED OVER BY HAND
NEED TO BECOME. BECAUSE OF THIS ADVANTAGE, THE MACHINE BECOMES A NOVELTY IN THE
BENDING SECTOR REPRESENTS, OF MANY AMERICAN AND NORTHERN EUROPEAN
COMPANIES. THE DAVI MFD IS DESIGNED FOR THE PRODUCTION OF THIN AND
MEDIUM-STRENGTH STRUCTURAL STEEL PRODUCTS SUCH AS DOORS, CABINETS,
METAL FIXTURES, SHELVES, KITCHENS, SWITCHBOARDS, ETC., BUT ALSO FOR
6 TO 8 MM THICK KASTENPROFI LE DESIGNED AND WAS AS FLEXIBLE
PRODUCTION SYSTEM FMS DESIGNED. THE BENDING SYSTEM HAS AN AUTOMATIC
SHEET FEEDER, A TAFELVORSCHUB- / TURNTABLE (MANIPULATOR) AND A
OUTFEED AND STACKING SYSTEM FOR THE DISCHARGE AND SUBSEQUENT STACKING OF
FINISHED SHEET METAL PARTS. THE CONTROL IS DONE WITH THE NC SYSTEM »GENIUS«,
THAT OF
DAVI PROMAU WAS DEVELOPED. IN THE FMS VERSION ALL CAN
PROCESSING STEPS CAN BE MANAGED WITH THIS CONTROL, WITHOUT A
SIMULATION OF THE DUTY CYCLE OR A TEACH-IN ARE REQUIRED. THIS
ALLOWS A MUCH FASTER CREATION OF THE MACHINE PROGRAM. AT
THICKNESS OR MATERIAL CHANGES WILL BE VALUABLE SET-UP TIME FOR THE
MACHINE SAVED, SINCE NEITHER THE TOOLS NOR THE COLLETS OF THE MANIPULATOR
HAVE TO BE REPLACED.





Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-cnc - control                                          delem da 65
pressure capacity                                               85 t 
bending length                                               2.550 mm
throat depth                                                   410 mm
working height                                               1.050 mm 
cnc - controlled crowning, controlled backgauge
pneumatic die shift
 
accessories: pad arms, shared tool
  CNC - CONTROL DELEM DA 65 PRESSURE CAPACITY 85 T BENDING LENGTH 2.550 MM THROAT DEPTH 410 MM WORKING HEIGHT 1.050 MM CNC - CONTROLLED CROWNING, CONTROLLED BACKGAUGE PNEUMATIC DIE SHIFT ACCESSORIES: PAD ARMS, SHARED TOOL
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 56.900 €
Ubicación: Land-cnc - control                                              delem da 69 
force                                                              130 t 
working width                                                    3,000 mm 
stroke max.                                                        215 mm operating pressure max.                                            340 bar 
delay                                                               62 ms 
connection capacity                                                 16 kva
machine weight                                                 11.25 t 

accessories: tool accessories in accordance with photos

 CNC - CONTROL DELEM DA 69 FORCE 130 T WORKING WIDTH 3,000 MM STROKE MAX. 215 MM OPERATING PRESSURE MAX. 340 BAR DELAY 62 MS CONNECTION CAPACITY 16 KVA MACHINE WEIGHT 11.25 T ACCESSORIES: TOOL ACCESSORIES IN ACCORDANCE WITH PHOTOS
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-pressure: 230 t<br/>chamfer lenght: 6050 mm<br/>dayligth: 745 mm<br/>stroke: 550 mm<br/>control: cybelec modeva 12s <br/>total power requirement: 32 kw<br/>weight of the machine ca.: 32000 kg<br/><br/><br/><br/><br/> PRESSURE: 230 T
CHAMFER LENGHT: 6050 MM
DAYLIGTH: 745 MM
STROKE: 550 MM
CONTROL: CYBELEC MODEVA 12S
TOTAL POWER REQUIREMENT: 32 KW
WEIGHT OF THE MACHINE CA.: 32000 KG




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine type: three roll bending machine,
manufacturer: fasti
model: 109/3,
year of construction: 1975
condition: very good,.
type of offer: used machine,
     ,.	
technical data:.
performance in mm: 2040 x 5.0,.
drive type: el / mech.,.
drive: 4.0 kw.
shaft diameter: 160 mm.
weight: 2500 kg.
     ,.	
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location.,.
     ,.
we will be pleased if you take an interest in our offer.,.
  MACHINE TYPE: THREE ROLL BENDING MACHINE, MANUFACTURER: FASTI MODEL: 109/3, YEAR OF CONSTRUCTION: 1975 CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. PERFORMANCE IN MM: 2040 X 5.0,. DRIVE TYPE: EL / MECH.,. DRIVE: 4.0 KW. SHAFT DIAMETER: 160 MM. WEIGHT: 2500 KG. ,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 51.400 €
Ubicación: Land-: 2.050 mm<br/>: 40 to<br/>: 2.050 mm<br/>: 200 mm<br/>: 400 mm<br/>: 900 mm<br/>: 650 mm<br/>: 250 mm<br/>: 6,2 kw<br/>: 2.870 mm<br/>: 1.625 mm<br/>: 2.700 mm<br/>: 5.100 kg<br/>- servo motoric drive of upper beam for highest speeds and energy efficiency<br/>- higher back gauge speed<br/>- high grade 3d colour display control<br/><br/><br/>standard equiptment:<br/><br/>3d grafic colour display control cybelec modeva 15t (touchscreen) for y1, y2 , x and r axes incl. bending sequence calculation, numeric display and grafic, incl. d-bend cad/cam software<br/>back gauge driven by servomotors on linear guiding and ball screw<br/>sectioned goose neck upper tool 1010/a/75°<br/>4-v die block 60x60 2009 (v= 16,22,35 and 50 mm)<br/>mot. anti deflection adjustable by cnc control<br/>sheet support arms on linear guiding<br/>laser safety device on upper beam<br/>users manual in english and german<br/><br/><br/>options:<br/><br/>additional controlled axes of back gauge x1, x2, delta x, r1, r2, z1, z2<br/>hydr. upper- and lower tool clamping for wila tools<br/>cnc delem da-66t<br/>3d touch screen cnc delem da-69t<br/><br/>(photo shows following options: delem da-69t control and wila tool clamping)<br/><br/><br/>bending length: 2.050 mm<br/>bending force: 40 to<br/>distance between columns: 2.050 mm<br/>stroke: 200 mm<br/>daylight: 400 mm<br/>working height: 900 mm<br/>axis:	y1 / y2, x und r axes<br/>approach speed: 180 mm/sek.<br/>return speed: 180 mm/sek.<br/>bending speed: 10 mm/sek.<br/>back gauge x axis range: 650 mm<br/>back gauge r axis range: 250 mm<br/>back gauge speed: 500 mm/sec<br/>upper tool: 1010/a/75° goose neck, sectioned<br/>lower tool: 4-v die 60x60 2009 (v= 16,22,35 and 50 mm)<br/>anti deflection: cnc contolled<br/>back gauge: cnc conrolled<br/>servo motor quantity: 2<br/>total motor power: 6,2 kw<br/>length: 2.870 mm<br/>width: 1.625 mm<br/>height: 2.700 mm<br/>weight: 5.100 kg<br/><br/><br/><br/> : 2.050 MM
: 40 TO
: 2.050 MM
: 200 MM
: 400 MM
: 900 MM
: 650 MM
: 250 MM
: 6,2 KW
: 2.870 MM
: 1.625 MM
: 2.700 MM
: 5.100 KG
- SERVO MOTORIC DRIVE OF UPPER BEAM FOR HIGHEST SPEEDS AND ENERGY EFFICIENCY
- HIGHER BACK GAUGE SPEED
- HIGH GRADE 3D COLOUR DISPLAY CONTROL


STANDARD EQUIPTMENT:

3D GRAFIC COLOUR DISPLAY CONTROL CYBELEC MODEVA 15T (TOUCHSCREEN) FOR Y1, Y2 , X AND R AXES INCL. BENDING SEQUENCE CALCULATION, NUMERIC DISPLAY AND GRAFIC, INCL. D-BEND CAD/CAM SOFTWARE
BACK GAUGE DRIVEN BY SERVOMOTORS ON LINEAR GUIDING AND BALL SCREW
SECTIONED GOOSE NECK UPPER TOOL 1010/A/75°
4-V DIE BLOCK 60X60 2009 (V= 16,22,35 AND 50 MM)
MOT. ANTI DEFLECTION ADJUSTABLE BY CNC CONTROL
SHEET SUPPORT ARMS ON LINEAR GUIDING
LASER SAFETY DEVICE ON UPPER BEAM
USERS MANUAL IN ENGLISH AND GERMAN


OPTIONS:

ADDITIONAL CONTROLLED AXES OF BACK GAUGE X1, X2, DELTA X, R1, R2, Z1, Z2
HYDR. UPPER- AND LOWER TOOL CLAMPING FOR WILA TOOLS
CNC DELEM DA-66T
3D TOUCH SCREEN CNC DELEM DA-69T

(PHOTO SHOWS FOLLOWING OPTIONS: DELEM DA-69T CONTROL AND WILA TOOL CLAMPING)


BENDING LENGTH: 2.050 MM
BENDING FORCE: 40 TO
DISTANCE BETWEEN COLUMNS: 2.050 MM
STROKE: 200 MM
DAYLIGHT: 400 MM
WORKING HEIGHT: 900 MM
AXIS: Y1 / Y2, X UND R AXES
APPROACH SPEED: 180 MM/SEK.
RETURN SPEED: 180 MM/SEK.
BENDING SPEED: 10 MM/SEK.
BACK GAUGE X AXIS RANGE: 650 MM
BACK GAUGE R AXIS RANGE: 250 MM
BACK GAUGE SPEED: 500 MM/SEC
UPPER TOOL: 1010/A/75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 60X60 2009 (V= 16,22,35 AND 50 MM)
ANTI DEFLECTION: CNC CONTOLLED
BACK GAUGE: CNC CONROLLED
SERVO MOTOR QUANTITY: 2
TOTAL MOTOR POWER: 6,2 KW
LENGTH: 2.870 MM
WIDTH: 1.625 MM
HEIGHT: 2.700 MM
WEIGHT: 5.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-used bending machine with robot
make: amada
type: fbd 125/3 mh
control: amnc rml 39
year of construction: 2000
pressing force: to 125.
bending length: 3100 mm
distance between posts: 2700 mm
distance between the stands: 400 mm
max stroke: 150 mm
height: 420 mm
axis of bending machine: 8
astro bending robot model 100 mh
robot axes: 5
maximum load: 20 kg
maximum workpiece dimensions: 1,800 x 300 x 2.5 mm
min. dimensions: 200 x 100 x 2.5 mm
loading and discharge loading robot model erx 1210
control: amnc rml26r
maximum load: 20 kg
power consumption: 33 kva

from site israel.
the machine is in operation and can be seen in production.

error in the technical data and intermediate sale reserve. USED BENDING MACHINE WITH ROBOT MAKE: AMADA TYPE: FBD 125/3 MH CONTROL: AMNC RML 39 YEAR OF CONSTRUCTION: 2000 PRESSING FORCE: TO 125. BENDING LENGTH: 3100 MM DISTANCE BETWEEN POSTS: 2700 MM DISTANCE BETWEEN THE STANDS: 400 MM MAX STROKE: 150 MM HEIGHT: 420 MM AXIS OF BENDING MACHINE: 8 ASTRO BENDING ROBOT MODEL 100 MH ROBOT AXES: 5 MAXIMUM LOAD: 20 KG MAXIMUM WORKPIECE DIMENSIONS: 1,800 X 300 X 2.5 MM MIN. DIMENSIONS: 200 X 100 X 2.5 MM LOADING AND DISCHARGE LOADING ROBOT MODEL ERX 1210 CONTROL: AMNC RML26R MAXIMUM LOAD: 20 KG POWER CONSUMPTION: 33 KVA FROM SITE ISRAEL. THE MACHINE IS IN OPERATION AND CAN BE SEEN IN PRODUCTION. ERROR IN THE TECHNICAL DATA AND INTERMEDIATE SALE RESERVE.
Vendedor: MAFdirekt Maschinen- & Anlagenfachhandel Marcus Epple
Año de construcción: usado
Precio: 42.840 €
Ubicación: Land-: 2.050 mm<br/>: 60 to<br/>: 7,5 kw<br/>: 1.700 mm<br/>: 400 mm<br/>: 104 mm<br/>: 900 mm<br/>: 350 mm<br/>: 650 mm<br/>: 100 lt<br/>: 3.200 mm<br/>: 1.200 mm<br/>: 2.350 mm<br/>: 3.550 kg<br/>4 axes (y1, y2, x and r axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8 sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/><br/>optional equipment:<br/><br/>   cnc cybelec modeva 19t ? 5.750,-   cnc controlled r-axis ? 5.550,-<br/>(included)   cnc crowning table ? 1.390,-<br/>(included)   quick connecting terminals for the upper tool ? 330,-   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 2.050 mm <br/>bending force: 60 to <br/>axis: 4 (y1, y2, x, r) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 7,5 kw <br/>distance between columns: 1.700 mm <br/>daylight: 400 mm <br/>table width: 104 mm <br/>table height: 900 mm <br/>throat depth: 350 mm <br/>travel of back gauge (x): 650 mm <br/>oiltank: 100 lt<br/>length: 3.200 mm <br/>width: 1.200 mm <br/>height: 2.350 mm <br/>weight: 3.550 kg<br/><br/><br/><br/> : 2.050 MM
: 60 TO
: 7,5 KW
: 1.700 MM
: 400 MM
: 104 MM
: 900 MM
: 350 MM
: 650 MM
: 100 LT
: 3.200 MM
: 1.200 MM
: 2.350 MM
: 3.550 KG
4 AXES (Y1, Y2, X AND R AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE 
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8 SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)


OPTIONAL EQUIPMENT:

CNC CYBELEC MODEVA 19T ? 5.750,- CNC CONTROLLED R-AXIS ? 5.550,-
(INCLUDED) CNC CROWNING TABLE ? 1.390,-
(INCLUDED) QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 330,- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 2.050 MM
BENDING FORCE: 60 TO
AXIS: 4 (Y1, Y2, X, R)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 7,5 KW
DISTANCE BETWEEN COLUMNS: 1.700 MM
DAYLIGHT: 400 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 350 MM
TRAVEL OF BACK GAUGE (X): 650 MM
OILTANK: 100 LT
LENGTH: 3.200 MM
WIDTH: 1.200 MM
HEIGHT: 2.350 MM
WEIGHT: 3.550 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-press brake / durma ad-s 40320
size: 5300 x 1910 x 3230 mm (l, w, h)
pressing force: 320 to
year of constr.: 2015
condition: very good, full function PRESS BRAKE / DURMA AD-S 40320 SIZE: 5300 X 1910 X 3230 MM (L, W, H) PRESSING FORCE: 320 TO YEAR OF CONSTR.: 2015 CONDITION: VERY GOOD, FULL FUNCTION
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 97.200 €
Ubicación: Land-: 4.050 mm<br/>: 320 to<br/>: 37 kw<br/>: 3.600 mm<br/>: 630 mm<br/>: 154 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 5.300 mm<br/>: 1.910 mm<br/>: 3.230 mm<br/>: 21.000 kg<br/>advantages compared to ad-r series:<br/><br/>- touch screen control cybelec modeva 19t with 3d presentation of the programmed workpiece<br/>- extended option amount<br/><br/><br/>standard equiptment:<br/><br/>3d grafic colour display control cybelec modeva 19t (touchscreen) for y1, y2 , x and r axes incl. bending sequence calculation, numeric display and grafic<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>sectioned goose neck upper tool 1010/a/75°<br/>4-v die block 60x60 2009 (v= 16,22,35 and 50 mm)<br/>mot. anti deflection adjustable by cnc control<br/>sheet support arms on linear guiding<br/>laser safety device on upper beam<br/>oil filling<br/>users manual in english and german<br/><br/><br/>options:<br/><br/>additional controlled axes of back gauge<br/>ap3-ap4 bending supports with sliding guide<br/>hydr. upper- and lower tool clamping for wila tools<br/>die relocate feature<br/>sheet feeding feature<br/>tandem preperation<br/>cnc delem da-66t<br/>3d touch screen cnc delem da-69t<br/><br/>we have more than 600 references!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/>bending length: 4.050 mm<br/>bending force: 320 to<br/>axis:	y1 / y2 / x and r axes<br/>upper tool:	75° goose neck, sectioned<br/>lower tool:	4-v die 16,22,35 und 50 mm<br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc conrolled<br/>motor power: 37 kw<br/>distance between columns: 	3.600 mm<br/>daylight: 630 mm<br/>table width: 154 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 5.300 mm<br/>width: 1.910 mm<br/>height: 3.230 mm<br/>weight: 21.000 kg<br/><br/><br/><br/> : 4.050 MM
: 320 TO
: 37 KW
: 3.600 MM
: 630 MM
: 154 MM
: 900 MM
: 410 MM
: 650 MM
: 5.300 MM
: 1.910 MM
: 3.230 MM
: 21.000 KG
ADVANTAGES COMPARED TO AD-R SERIES:

- TOUCH SCREEN CONTROL CYBELEC MODEVA 19T WITH 3D PRESENTATION OF THE PROGRAMMED WORKPIECE
- EXTENDED OPTION AMOUNT


STANDARD EQUIPTMENT:

3D GRAFIC COLOUR DISPLAY CONTROL CYBELEC MODEVA 19T (TOUCHSCREEN) FOR Y1, Y2 , X AND R AXES INCL. BENDING SEQUENCE CALCULATION, NUMERIC DISPLAY AND GRAFIC
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
SECTIONED GOOSE NECK UPPER TOOL 1010/A/75°
4-V DIE BLOCK 60X60 2009 (V= 16,22,35 AND 50 MM)
MOT. ANTI DEFLECTION ADJUSTABLE BY CNC CONTROL
SHEET SUPPORT ARMS ON LINEAR GUIDING
LASER SAFETY DEVICE ON UPPER BEAM
OIL FILLING
USERS MANUAL IN ENGLISH AND GERMAN


OPTIONS:

ADDITIONAL CONTROLLED AXES OF BACK GAUGE
AP3-AP4 BENDING SUPPORTS WITH SLIDING GUIDE
HYDR. UPPER- AND LOWER TOOL CLAMPING FOR WILA TOOLS
DIE RELOCATE FEATURE
SHEET FEEDING FEATURE
TANDEM PREPERATION
CNC DELEM DA-66T
3D TOUCH SCREEN CNC DELEM DA-69T

WE HAVE MORE THAN 600 REFERENCES!

(SAMPLE PHOTO)






BENDING LENGTH: 4.050 MM
BENDING FORCE: 320 TO
AXIS: Y1 / Y2 / X AND R AXES
UPPER TOOL: 75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 16,22,35 UND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 37 KW
DISTANCE BETWEEN COLUMNS: 3.600 MM
DAYLIGHT: 630 MM
TABLE WIDTH: 154 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 5.300 MM
WIDTH: 1.910 MM
HEIGHT: 3.230 MM
WEIGHT: 21.000 KG



Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)