34 ofertas

Año de construcción: usado
Ubicación: Land-tunnel of cooking pasta-storci

-belt width: 1050 mm - width overall: 2460 mm - width tunnel: 1700 mm - length overall: 10 300 mm - drying area: 2300 mm - cooking area: 5900 mm - product passage height: 60 mm TUNNEL OF COOKING PASTA-STORCI -BELT WIDTH: 1050 MM - WIDTH OVERALL: 2460 MM - WIDTH TUNNEL: 1700 MM - LENGTH OVERALL: 10 300 MM - DRYING AREA: 2300 MM - COOKING AREA: 5900 MM - PRODUCT PASSAGE HEIGHT: 60 MM
Vendedor: Europ-Equipement
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine pro p60slt slanting quad<br><br>vertical form and fill machine to do quad-seal-bags. can be operated in slanting or vertical position to allow protection of easy breakable products like thin deep frozen food, thin sugar or bakery products, etc. siemens plc, large colour touchscreen, servo motor film pulling, easy change of film roll. <br><br>- specifications: filling volume: 100-5000ml | bag size: l(150-480)xw(90-160)xd(50-100)mm | max. speed of the machine in neutral: 60 cycles/minute | film material: opp/cpp, poo/ce, pet/pe, etc | 380v, 7.5kw | 0.6m³, 6bar | machine dimensions: l1700xw950xh1900mm | weight: 1200kg.<br><br>that machine/system is available in different versions for different bag types, packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE PRO P60SLT SLANTING QUAD

VERTICAL FORM AND FILL MACHINE TO DO QUAD-SEAL-BAGS. CAN BE OPERATED IN SLANTING OR VERTICAL POSITION TO ALLOW PROTECTION OF EASY BREAKABLE PRODUCTS LIKE THIN DEEP FROZEN FOOD, THIN SUGAR OR BAKERY PRODUCTS, ETC. SIEMENS PLC, LARGE COLOUR TOUCHSCREEN, SERVO MOTOR FILM PULLING, EASY CHANGE OF FILM ROLL.

- SPECIFICATIONS: FILLING VOLUME: 100-5000ML | BAG SIZE: L(150-480)XW(90-160)XD(50-100)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | FILM MATERIAL: OPP/CPP, POO/CE, PET/PE, ETC | 380V, 7.5KW | 0.6M³, 6BAR | MACHINE DIMENSIONS: L1700XW950XH1900MM | WEIGHT: 1200KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT BAG TYPES, PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-
siemens 840 d range on clamping surface (threaded holes according to din 55201) 400 * 400 mm
nc rotary table
pallet changer with rotary chuck platt
stã¤nderlã¤ngsverstellung (x) 650 mm
support vertical adjustment (y) 650 mm
table cross adjustment (z) 650 mm
interference circle diameter 㸠700 mm
motor spindle speed 15000 rpm
main drive power 31 kw
torque 200 nm
tool holder hsk din 69893-hsk-a63
chain-type tool magazine 60 seats
prepare subsequent cultivation of
portable electronic hand wheel
chip conveyors, scraper discharge height 1050 mm
closed working space panel according to uvv
number of counters on nc screen
remote diagnosis
pallet sequence operation
operating hours display
operating voltage 400 v / 50 hz
â?¢ internal coolant supply:

coolant through the spindle center-centric for ad m
refrigerant pressure at the pressure relief valve (mechanically adjustable) 30/40/50 bar
coolant tank capacity 900 l
backwash filter
â?¢ external coolant supply:

coolant nozzles to the centre of the spindle
the pump delivery rate 50 l / min
rinse-gun on the clamping square
waterfall shower

â?¢ workpiece carrier:

clamping surface 400 * 400 mm
max load per pallet 400 kg
height of workpiece clamping surface of bottom bed 1000 mm
set bore you. 20 h6
centering bore you. 50 h6
mounting thread 43 * m12
distance of the alignment hole to the center of the table 150 +/-0.013 mm
interference circle diameter 㸠700 mm
â?¢ nc-rotary table:

maximum rotation of the rotary table 25 u/min
input and display fineness 0.001 degrees
tangential torque 3000 nm
pull-out torque 5000 nm
â?¢ automatic pallet changer:

interchangeable pallets 2
maximum pallet change time 8 s
â?¢ process areas:

min. distance of work spindle front middle workpiece carrier 50 mm
min. distance of work spindle mid to upper edge of workpiece carrier 30 mm
maximum permissible height of work pieces and
clamping device is for changing in the work room 750 mm

â?¢ feed in the axes x, y, and z

adjustable work feed range up to 40000 mm / min
rapid traverse rate 40 m / min
acceleration 7 m/sâ²

â?¢ spindle:

diameter of front bearing ã? 75 mm
tool holder hsk din 69893-hsk-a63
main motor power (40%) 31 kw
(100%) 19 kw
spindle torque (40%) 200 nm
(100%) 165 nm
work spindle speeds 50 to 15000 rpm
process lubrication through the centre of the spindle: flow rate pump
pressure at the pressure relief valve
30/27/24 l / min 30/40/50 bar
process lubrication nozzles: flow rate pump pump pressure
total volume of coolant tank coolant
50 l / min
2 bar
900 l
1100 l
waterfall shower:
amount of coolant
200 l
â?¢ automatic tool change:

chip to chip time (measured according to vdi 2852) 5s
â?¢ chain-type tool magazine:

capacity 60
tool dimensions:
max tool diameter
(with free neighbouring places)
ã? 160 mm (when allocated
neighbouring places) 㸠85 mm
max tool overhang length 350 mm
10 kg max set tool dimensions
maximum tilting torque 10 nm
total weight of all tools in the memory-200 kg

â?¢
â?¢ net mass:

machine complete with chip conveyor and coolant tank 12800 kg
â?¢ machine dimensions:

lenght 4730 mm basic machine
wide base machine 3252 mm
height from bottom edge of 2870 mm machine
distance between the lower edge of the machine and top foundation 120 mm

â?¢ continuous power demand:

continuous power 65 kw

â?¢ pallets / clamping hydraulics
400 * 500 mm square pallets instead ï?? 2 rectangle pallets

â?¢ coolant
ï?? coolant unit with vacuum rotation filter
ï?? 30/40/50 bar can be switched via m command
ï?? 1250 l content
ï?? free-standing

â?¢ auxiliary equipment
visiport
ï?? pneumatic, rotating visor in the working space guard at the master control

tool breakage detection
ï?? pneumatic cylinder with integrated measuring system

â?¢ control accessories and control options
software hw2diff
ï?? list missing tools created on the mc control by comparing the t commands of a selected nc program with the tool list
ï?? unloading loading list can be generated

machine coupling via ethernet card
ï?? transfer rate of can be set 10 or 100 mbit/sec
ï?? with rj45 connector (twisted pair)
ï?? other interfaces on request
hand control panel and electronic handwheel network map
ï?? tooled 22.08.2016
ï?? windows 95
ï?§ pci adapter there
ï?? 3com etherlink 10/100

ï?¼ annual maintenance by manufacturer

condition: very good / available kw 17/2019 - machine under electricity  SIEMENS 840 D RANGE ON CLAMPING SURFACE (THREADED HOLES ACCORDING TO DIN 55201) 400 * 400 MM NC ROTARY TABLE PALLET CHANGER WITH ROTARY CHUCK PLATT ST&ATILDE;&CURREN;NDERL&ATILDE;&CURREN;NGSVERSTELLUNG (X) 650 MM SUPPORT VERTICAL ADJUSTMENT (Y) 650 MM TABLE CROSS ADJUSTMENT (Z) 650 MM INTERFERENCE CIRCLE DIAMETER &ATILDE;&CEDIL; 700 MM MOTOR SPINDLE SPEED 15000 RPM MAIN DRIVE POWER 31 KW TORQUE 200 NM TOOL HOLDER HSK DIN 69893-HSK-A63 CHAIN-TYPE TOOL MAGAZINE 60 SEATS PREPARE SUBSEQUENT CULTIVATION OF PORTABLE ELECTRONIC HAND WHEEL CHIP CONVEYORS, SCRAPER DISCHARGE HEIGHT 1050 MM CLOSED WORKING SPACE PANEL ACCORDING TO UVV NUMBER OF COUNTERS ON NC SCREEN REMOTE DIAGNOSIS PALLET SEQUENCE OPERATION OPERATING HOURS DISPLAY OPERATING VOLTAGE 400 V / 50 HZ &ACIRC;?&CENT; INTERNAL COOLANT SUPPLY: COOLANT THROUGH THE SPINDLE CENTER-CENTRIC FOR AD M REFRIGERANT PRESSURE AT THE PRESSURE RELIEF VALVE (MECHANICALLY ADJUSTABLE) 30/40/50 BAR COOLANT TANK CAPACITY 900 L BACKWASH FILTER &ACIRC;?&CENT; EXTERNAL COOLANT SUPPLY: COOLANT NOZZLES TO THE CENTRE OF THE SPINDLE THE PUMP DELIVERY RATE 50 L / MIN RINSE-GUN ON THE CLAMPING SQUARE WATERFALL SHOWER &ACIRC;?&CENT; WORKPIECE CARRIER: CLAMPING SURFACE 400 * 400 MM MAX LOAD PER PALLET 400 KG HEIGHT OF WORKPIECE CLAMPING SURFACE OF BOTTOM BED 1000 MM SET BORE YOU. 20 H6 CENTERING BORE YOU. 50 H6 MOUNTING THREAD 43 * M12 DISTANCE OF THE ALIGNMENT HOLE TO THE CENTER OF THE TABLE 150 +/-0.013 MM INTERFERENCE CIRCLE DIAMETER &ATILDE;&CEDIL; 700 MM &ACIRC;?&CENT; NC-ROTARY TABLE: MAXIMUM ROTATION OF THE ROTARY TABLE 25 U/MIN INPUT AND DISPLAY FINENESS 0.001 DEGREES TANGENTIAL TORQUE 3000 NM PULL-OUT TORQUE 5000 NM &ACIRC;?&CENT; AUTOMATIC PALLET CHANGER: INTERCHANGEABLE PALLETS 2 MAXIMUM PALLET CHANGE TIME 8 S &ACIRC;?&CENT; PROCESS AREAS: MIN. DISTANCE OF WORK SPINDLE FRONT MIDDLE WORKPIECE CARRIER 50 MM MIN. DISTANCE OF WORK SPINDLE MID TO UPPER EDGE OF WORKPIECE CARRIER 30 MM MAXIMUM PERMISSIBLE HEIGHT OF WORK PIECES AND CLAMPING DEVICE IS FOR CHANGING IN THE WORK ROOM 750 MM &ACIRC;?&CENT; FEED IN THE AXES X, Y, AND Z ADJUSTABLE WORK FEED RANGE UP TO 40000 MM / MIN RAPID TRAVERSE RATE 40 M / MIN ACCELERATION 7 M/S&ACIRC;&SUP2; &ACIRC;?&CENT; SPINDLE: DIAMETER OF FRONT BEARING &ATILDE;? 75 MM TOOL HOLDER HSK DIN 69893-HSK-A63 MAIN MOTOR POWER (40%) 31 KW (100%) 19 KW SPINDLE TORQUE (40%) 200 NM (100%) 165 NM WORK SPINDLE SPEEDS 50 TO 15000 RPM PROCESS LUBRICATION THROUGH THE CENTRE OF THE SPINDLE: FLOW RATE PUMP PRESSURE AT THE PRESSURE RELIEF VALVE 30/27/24 L / MIN 30/40/50 BAR PROCESS LUBRICATION NOZZLES: FLOW RATE PUMP PUMP PRESSURE TOTAL VOLUME OF COOLANT TANK COOLANT 50 L / MIN 2 BAR 900 L 1100 L WATERFALL SHOWER: AMOUNT OF COOLANT 200 L &ACIRC;?&CENT; AUTOMATIC TOOL CHANGE: CHIP TO CHIP TIME (MEASURED ACCORDING TO VDI 2852) 5S &ACIRC;?&CENT; CHAIN-TYPE TOOL MAGAZINE: CAPACITY 60 TOOL DIMENSIONS: MAX TOOL DIAMETER (WITH FREE NEIGHBOURING PLACES) &ATILDE;? 160 MM (WHEN ALLOCATED NEIGHBOURING PLACES) &ATILDE;&CEDIL; 85 MM MAX TOOL OVERHANG LENGTH 350 MM 10 KG MAX SET TOOL DIMENSIONS MAXIMUM TILTING TORQUE 10 NM TOTAL WEIGHT OF ALL TOOLS IN THE MEMORY-200 KG &ACIRC;?&CENT; &ACIRC;?&CENT; NET MASS: MACHINE COMPLETE WITH CHIP CONVEYOR AND COOLANT TANK 12800 KG &ACIRC;?&CENT; MACHINE DIMENSIONS: LENGHT 4730 MM BASIC MACHINE WIDE BASE MACHINE 3252 MM HEIGHT FROM BOTTOM EDGE OF 2870 MM MACHINE DISTANCE BETWEEN THE LOWER EDGE OF THE MACHINE AND TOP FOUNDATION 120 MM &ACIRC;?&CENT; CONTINUOUS POWER DEMAND: CONTINUOUS POWER 65 KW &ACIRC;?&CENT; PALLETS / CLAMPING HYDRAULICS 400 * 500 MM SQUARE PALLETS INSTEAD &IUML;?? 2 RECTANGLE PALLETS &ACIRC;?&CENT; COOLANT &IUML;?? COOLANT UNIT WITH VACUUM ROTATION FILTER &IUML;?? 30/40/50 BAR CAN BE SWITCHED VIA M COMMAND &IUML;?? 1250 L CONTENT &IUML;?? FREE-STANDING &ACIRC;?&CENT; AUXILIARY EQUIPMENT VISIPORT &IUML;?? PNEUMATIC, ROTATING VISOR IN THE WORKING SPACE GUARD AT THE MASTER CONTROL TOOL BREAKAGE DETECTION &IUML;?? PNEUMATIC CYLINDER WITH INTEGRATED MEASURING SYSTEM &ACIRC;?&CENT; CONTROL ACCESSORIES AND CONTROL OPTIONS SOFTWARE HW2DIFF &IUML;?? LIST MISSING TOOLS CREATED ON THE MC CONTROL BY COMPARING THE T COMMANDS OF A SELECTED NC PROGRAM WITH THE TOOL LIST &IUML;?? UNLOADING LOADING LIST CAN BE GENERATED MACHINE COUPLING VIA ETHERNET CARD &IUML;?? TRANSFER RATE OF CAN BE SET 10 OR 100 MBIT/SEC &IUML;?? WITH RJ45 CONNECTOR (TWISTED PAIR) &IUML;?? OTHER INTERFACES ON REQUEST HAND CONTROL PANEL AND ELECTRONIC HANDWHEEL NETWORK MAP &IUML;?? TOOLED 22.08.2016 &IUML;?? WINDOWS 95 &IUML;?&SECT; PCI ADAPTER THERE &IUML;?? 3COM ETHERLINK 10/100 &IUML;?&FRAC14; ANNUAL MAINTENANCE BY MANUFACTURER CONDITION: VERY GOOD / AVAILABLE KW 17/2019 - MACHINE UNDER ELECTRICITY
Vendedor: Moser Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine pro p60slt slanting pillow<br><br>vertical form and fill machine to do pillow bags. can be operated in slanting or vertical position to allow protection of easy breakable products like thin deep frozen food, thin sugar or bakery products, etc. siemens plc, large colour touchscreen, servo motor film pulling, easy change of film roll. <br><br>- specifications: filling volume: 100-5000ml | bag size: l(150-480)xw(100-320)mm | max. speed of the machine in neutral: 60 cycles/minute | film material: opp/cpp, poo/ce, pet/pe, etc. | 380v, 7.5kw | 0.6m³, 6bar | machine dimensions: l1700xw950xh1900mm | weight: 1200kg.<br><br>that machine/system is available in different versions for different bag types, packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE PRO P60SLT SLANTING PILLOW

VERTICAL FORM AND FILL MACHINE TO DO PILLOW BAGS. CAN BE OPERATED IN SLANTING OR VERTICAL POSITION TO ALLOW PROTECTION OF EASY BREAKABLE PRODUCTS LIKE THIN DEEP FROZEN FOOD, THIN SUGAR OR BAKERY PRODUCTS, ETC. SIEMENS PLC, LARGE COLOUR TOUCHSCREEN, SERVO MOTOR FILM PULLING, EASY CHANGE OF FILM ROLL.

- SPECIFICATIONS: FILLING VOLUME: 100-5000ML | BAG SIZE: L(150-480)XW(100-320)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | FILM MATERIAL: OPP/CPP, POO/CE, PET/PE, ETC. | 380V, 7.5KW | 0.6M³, 6BAR | MACHINE DIMENSIONS: L1700XW950XH1900MM | WEIGHT: 1200KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT BAG TYPES, PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-vertical - cnc machining center hermle c 40 u

with train control heidenhain itnc 530
year of construction: 2004 traverse paths: x 850 y 700 z 500
speed range: 20 - 18,000 rpm continuously (sk 40) with the following accessories:

nc rotary table ã? 420 mm
vertical tool changer magazine 38-seat (sk 40)
additional magazine 43 seats (43 cm)
linear axes standard version
blow-off device
prepared ikz
band conveyors
coolant system
manual car door, manual roof
laminated glass - safety glass
electronic heat compensation itnc 530
electr. hand control module hr 410
3d measuring probe renishaw
tool breakage detection
sealing air for standards
bed flushing
chip washing gun
t - grooves for srt 420
a - axis position middle
oil mist extraction
height-adjustable 4 piece mounts
operating instructions VERTICAL - CNC MACHINING CENTER HERMLE C 40 U WITH TRAIN CONTROL HEIDENHAIN ITNC 530 YEAR OF CONSTRUCTION: 2004 TRAVERSE PATHS: X 850 Y 700 Z 500 SPEED RANGE: 20 - 18,000 RPM CONTINUOUSLY (SK 40) WITH THE FOLLOWING ACCESSORIES: NC ROTARY TABLE &ATILDE;? 420 MM VERTICAL TOOL CHANGER MAGAZINE 38-SEAT (SK 40) ADDITIONAL MAGAZINE 43 SEATS (43 CM) LINEAR AXES STANDARD VERSION BLOW-OFF DEVICE PREPARED IKZ BAND CONVEYORS COOLANT SYSTEM MANUAL CAR DOOR, MANUAL ROOF LAMINATED GLASS - SAFETY GLASS ELECTRONIC HEAT COMPENSATION ITNC 530 ELECTR. HAND CONTROL MODULE HR 410 3D MEASURING PROBE RENISHAW TOOL BREAKAGE DETECTION SEALING AIR FOR STANDARDS BED FLUSHING CHIP WASHING GUN T - GROOVES FOR SRT 420 A - AXIS POSITION MIDDLE OIL MIST EXTRACTION HEIGHT-ADJUSTABLE 4 PIECE MOUNTS OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1400 x 800 x 1700 mm<br/>description: serial number 270093. see photo WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 800 X 1700 MM
DESCRIPTION: SERIAL NUMBER 270093. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904927
number: 1 pcs.
manufacturer: sw
type: ba w04-42
control: siemens 840 d solutionline
year of constr.: 2015
state of preservation: second-hand machine
machine a (hours): 12.790
spindle a (hours): 5,500

description

milling

travel in x 200 mm
travel in y (775) 500 mm
travel in z 425 mm
maximum rapid traverse in x/y/z 70/100/100 m / min
maximum acceleration in x/y/z 10/10/22 m / s2
feed force in the x/y/z 10000/15000/15000 n
direct measuring system x/y/z/a/u/c/w
linear or torqueantrieb x / y / z / a / u / c / w
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 32 kw
maximum torque at ed 10-40 / 100% 72 nm
spindle diameter in front bearing 80 mm
horizontally arranged 4 pcs. spindle/n
spindle distance 200 mm
pneumatic tool system control
chain-type tool magazine 4 ã? 18 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 150 mm
maximum tool length 300 mm
maximum tool weight 10 kg
exciting to chip time 2.4 s
workpiece change table 2 fold
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
8 pcs. nc-controlled rotary table (2 ã? 4 pcs.)
rotary table diameter 125 mm
bridges dimension 550 ã? 1030 mm
4 pcs. clamping bridge conditions
hydraulic clamping
2 additional / -r clamping circuit (s)

more facilities

tool breakage detection
splash panel with fully encapsulated workspace
automatic work space door
lighting in the work area
oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1100 mm
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
high pressure pump 70 bar
machine status light

general technical data

operating voltage 400/50 v / hz
total power requirement 156 kva
transport dimensions of the machine lxwxh) approx. 3230 x 3050 x 5100 mm
floor space of throughout the facility lxwxh) approx. 4350 x 3100 x 7000 mm
machine weight 18000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904927 NUMBER: 1 PCS. MANUFACTURER: SW TYPE: BA W04-42 CONTROL: SIEMENS 840 D SOLUTIONLINE YEAR OF CONSTR.: 2015 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 12.790 SPINDLE A (HOURS): 5,500 DESCRIPTION MILLING TRAVEL IN X 200 MM TRAVEL IN Y (775) 500 MM TRAVEL IN Z 425 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 70/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 10/10/22 M / S2 FEED FORCE IN THE X/Y/Z 10000/15000/15000 N DIRECT MEASURING SYSTEM X/Y/Z/A/U/C/W LINEAR OR TORQUEANTRIEB X / Y / Z / A / U / C / W TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 32 KW MAXIMUM TORQUE AT ED 10-40 / 100% 72 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 4 PCS. SPINDLE/N SPINDLE DISTANCE 200 MM PNEUMATIC TOOL SYSTEM CONTROL CHAIN-TYPE TOOL MAGAZINE 4 &ATILDE;? 18 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 150 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 10 KG EXCITING TO CHIP TIME 2.4 S WORKPIECE CHANGE TABLE 2 FOLD 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 8 PCS. NC-CONTROLLED ROTARY TABLE (2 &ATILDE;? 4 PCS.) ROTARY TABLE DIAMETER 125 MM BRIDGES DIMENSION 550 &ATILDE;? 1030 MM 4 PCS. CLAMPING BRIDGE CONDITIONS HYDRAULIC CLAMPING 2 ADDITIONAL / -R CLAMPING CIRCUIT (S) MORE FACILITIES TOOL BREAKAGE DETECTION SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1100 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR MACHINE STATUS LIGHT GENERAL TECHNICAL DATA OPERATING VOLTAGE 400/50 V / HZ TOTAL POWER REQUIREMENT 156 KVA TRANSPORT DIMENSIONS OF THE MACHINE LXWXH) APPROX. 3230 X 3050 X 5100 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4350 X 3100 X 7000 MM MACHINE WEIGHT 18000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 700 mm<br/>description: 4.4 a, 380 v, 4 rollers, 2 speeds WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 700 MM
DESCRIPTION: 4.4 A, 380 V, 4 ROLLERS, 2 SPEEDS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 115.000 €
Ubicación: Land-
machine type cnc lathe make nakamura type super ntj built in 2003 control type cnc storage france country of origin japan delivery time upon request of freight base from site technical details

turning diameter 190 mm turning length 700 mm control fanuc 18 itb speed 5,000 r/min rapid traverse rate: 16,40.6 (x, y, z) 15/11 kw main/counter spindle kw number tools 2 x 12 / 2 x 24 pcs 
tool holder directly number of axles 9-controlled st. 
driven tools 12 per turret conveyors mayfran eject of right kw clamping cylinder bar passage 82 duty hours 3000 h machine weight 13 tons of additional information

engine type: horizontal
 counter spindle
 clamping spindle: hainbuch modular gr 65 + 3 jaw chuck
 spannmitel counter spindle: hainbuch spanntop combi pull gr 65 + 3 jaw chuck
 y-axis +-45 mm
 b-axis +-91 â° on upper turret
 nt-nurse + nc kit
 feed blow out from the outside on main spindle coolant and air through the counter spindle
 precast grippers g/l 165 mm d 65 mm, 3 kg
 part on a tray
 handwheel

and 12-driven tool holders
 12 fixed holder
 spaenefoerderer MACHINE TYPE CNC LATHE MAKE NAKAMURA TYPE SUPER NTJ BUILT IN 2003 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY TIME UPON REQUEST OF FREIGHT BASE FROM SITE TECHNICAL DETAILS TURNING DIAMETER 190 MM TURNING LENGTH 700 MM CONTROL FANUC 18 ITB SPEED 5,000 R/MIN RAPID TRAVERSE RATE: 16,40.6 (X, Y, Z) 15/11 KW MAIN/COUNTER SPINDLE KW NUMBER TOOLS 2 X 12 / 2 X 24 PCS TOOL HOLDER DIRECTLY NUMBER OF AXLES 9-CONTROLLED ST. DRIVEN TOOLS 12 PER TURRET CONVEYORS MAYFRAN EJECT OF RIGHT KW CLAMPING CYLINDER BAR PASSAGE 82 DUTY HOURS 3000 H MACHINE WEIGHT 13 TONS OF ADDITIONAL INFORMATION ENGINE TYPE: HORIZONTAL COUNTER SPINDLE CLAMPING SPINDLE: HAINBUCH MODULAR GR 65 + 3 JAW CHUCK SPANNMITEL COUNTER SPINDLE: HAINBUCH SPANNTOP COMBI PULL GR 65 + 3 JAW CHUCK Y-AXIS +-45 MM B-AXIS +-91 &ACIRC;&DEG; ON UPPER TURRET NT-NURSE + NC KIT FEED BLOW OUT FROM THE OUTSIDE ON MAIN SPINDLE COOLANT AND AIR THROUGH THE COUNTER SPINDLE PRECAST GRIPPERS G/L 165 MM D 65 MM, 3 KG PART ON A TRAY HANDWHEEL AND 12-DRIVEN TOOL HOLDERS 12 FIXED HOLDER SPAENEFOERDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: used machinery auction RESALE 2.450 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 2000 x 2100 x 2700 mm<br/>description: table dimensions: 1000 x 450 mm. taper: bt 40. spindle speed: 6000 rpm. spindle motor power: 7,5 kw.<br> travels (x,y,z): 610 x 430 x 460 mm.<br> cutting feed: 8m / min. rapid feeds: 18m / min.<br> 16-stations atc.<br> cnc fanuc 0-m.<br> chip conveyor and electronic handwheel included. WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 2100 X 2700 MM
DESCRIPTION: TABLE DIMENSIONS: 1000 X 450 MM. TAPER: BT 40. SPINDLE SPEED: 6000 RPM. SPINDLE MOTOR POWER: 7,5 KW.
TRAVELS (X,Y,Z): 610 X 430 X 460 MM.
CUTTING FEED: 8M / MIN. RAPID FEEDS: 18M / MIN.
16-STATIONS ATC.
CNC FANUC 0-M.
CHIP CONVEYOR AND ELECTRONIC HANDWHEEL INCLUDED.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-vertical - cnc machining center hermle c 800 u

with train control heidenhain tnc 430
year of construction: 2004 traverse paths: x 800 y 600 z 500
speed range: 0 - 16,000 rpm continuously (sk 40) with the following accessories:

solid angle table 1000 x 560 mm clamping surface
turn adjuster integrated in the left part of the wall with collet chuck and tailstock
vertical tool changer with 30 magazine places (sk 40)
1 high-speed spindle 50000 rpm
1 high on spindle 70000 rpm
prepared ikz
chip conveyor
3d measuring probe renishaw mp 10
tool breakage detection
electronic handwheel
electronic heat compensation y/z axis
oil mist extraction
chip washing gun
ethernet interface
full cab with sliding door and interior light
coolant system
4 adjustable mounts
operating instructions VERTICAL - CNC MACHINING CENTER HERMLE C 800 U WITH TRAIN CONTROL HEIDENHAIN TNC 430 YEAR OF CONSTRUCTION: 2004 TRAVERSE PATHS: X 800 Y 600 Z 500 SPEED RANGE: 0 - 16,000 RPM CONTINUOUSLY (SK 40) WITH THE FOLLOWING ACCESSORIES: SOLID ANGLE TABLE 1000 X 560 MM CLAMPING SURFACE TURN ADJUSTER INTEGRATED IN THE LEFT PART OF THE WALL WITH COLLET CHUCK AND TAILSTOCK VERTICAL TOOL CHANGER WITH 30 MAGAZINE PLACES (SK 40) 1 HIGH-SPEED SPINDLE 50000 RPM 1 HIGH ON SPINDLE 70000 RPM PREPARED IKZ CHIP CONVEYOR 3D MEASURING PROBE RENISHAW MP 10 TOOL BREAKAGE DETECTION ELECTRONIC HANDWHEEL ELECTRONIC HEAT COMPENSATION Y/Z AXIS OIL MIST EXTRACTION CHIP WASHING GUN ETHERNET INTERFACE FULL CAB WITH SLIDING DOOR AND INTERIOR LIGHT COOLANT SYSTEM 4 ADJUSTABLE MOUNTS OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 390 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 3200 x 1450 x 1300 mm<br/>description: drilling machine, 3 drilling heads, working table lenght: 2800 mm, WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 3200 X 1450 X 1300 MM
DESCRIPTION: DRILLING MACHINE, 3 DRILLING HEADS, WORKING TABLE LENGHT: 2800 MM,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904922
number: 1 pcs.
manufacturer: lid maho
type: dmf 220 linear
control: heidenhain itnc 530
year of construction: 2006
state of preservation: second-hand machine
machine a (hours): 43.300
control a (hours): 27,600
spindle a (hours): 19,900

description

milling

travel in x 2200 mm
travel in y 560 mm
travel in z 720 mm
maximum rapid traverse in x/y/z 100/50/50 m / min
linear motor in x-axis
toolholder sk 40
maximum speed milling spindle 18000 1/min
maximum power with ed 10-40 / 100% 25 kw
chain-type tool magazine 30 stations
machine table 2600 ã? 600 mm

more facilities

ir workpiece measuring probes
tool measurement by laser
tool breakage control by means of laser
splash panel with fully encapsulated workspace
lighting in the work area
chip conveyor
machine is / was operated with emulsion
coolant system

general technical data

floor space of throughout the facility lxwxh) approx. 6400 x 3600 x 2700 mm
machine weight 12500 kg

comment

new stem directly from deckel maho, with 980 hours of running time

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904922 NUMBER: 1 PCS. MANUFACTURER: LID MAHO TYPE: DMF 220 LINEAR CONTROL: HEIDENHAIN ITNC 530 YEAR OF CONSTRUCTION: 2006 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 43.300 CONTROL A (HOURS): 27,600 SPINDLE A (HOURS): 19,900 DESCRIPTION MILLING TRAVEL IN X 2200 MM TRAVEL IN Y 560 MM TRAVEL IN Z 720 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/50/50 M / MIN LINEAR MOTOR IN X-AXIS TOOLHOLDER SK 40 MAXIMUM SPEED MILLING SPINDLE 18000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 25 KW CHAIN-TYPE TOOL MAGAZINE 30 STATIONS MACHINE TABLE 2600 &ATILDE;? 600 MM MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL MEASUREMENT BY LASER TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM GENERAL TECHNICAL DATA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 6400 X 3600 X 2700 MM MACHINE WEIGHT 12500 KG COMMENT NEW STEM DIRECTLY FROM DECKEL MAHO, WITH 980 HOURS OF RUNNING TIME WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: 42.840 €
Ubicación: Land-: 2.050 mm<br/>: 60 to<br/>: 7,5 kw<br/>: 1.700 mm<br/>: 400 mm<br/>: 104 mm<br/>: 900 mm<br/>: 350 mm<br/>: 650 mm<br/>: 100 lt<br/>: 3.200 mm<br/>: 1.200 mm<br/>: 2.350 mm<br/>: 3.550 kg<br/>4 axes (y1, y2, x and r axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8 sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/><br/>optional equipment:<br/><br/>   cnc cybelec modeva 19t ? 5.750,-   cnc controlled r-axis ? 5.550,-<br/>(included)   cnc crowning table ? 1.390,-<br/>(included)   quick connecting terminals for the upper tool ? 330,-   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 2.050 mm <br/>bending force: 60 to <br/>axis: 4 (y1, y2, x, r) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 7,5 kw <br/>distance between columns: 1.700 mm <br/>daylight: 400 mm <br/>table width: 104 mm <br/>table height: 900 mm <br/>throat depth: 350 mm <br/>travel of back gauge (x): 650 mm <br/>oiltank: 100 lt<br/>length: 3.200 mm <br/>width: 1.200 mm <br/>height: 2.350 mm <br/>weight: 3.550 kg<br/><br/><br/><br/> : 2.050 MM
: 60 TO
: 7,5 KW
: 1.700 MM
: 400 MM
: 104 MM
: 900 MM
: 350 MM
: 650 MM
: 100 LT
: 3.200 MM
: 1.200 MM
: 2.350 MM
: 3.550 KG
4 AXES (Y1, Y2, X AND R AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE 
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8 SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)


OPTIONAL EQUIPMENT:

CNC CYBELEC MODEVA 19T ? 5.750,- CNC CONTROLLED R-AXIS ? 5.550,-
(INCLUDED) CNC CROWNING TABLE ? 1.390,-
(INCLUDED) QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 330,- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 2.050 MM
BENDING FORCE: 60 TO
AXIS: 4 (Y1, Y2, X, R)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 7,5 KW
DISTANCE BETWEEN COLUMNS: 1.700 MM
DAYLIGHT: 400 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 350 MM
TRAVEL OF BACK GAUGE (X): 650 MM
OILTANK: 100 LT
LENGTH: 3.200 MM
WIDTH: 1.200 MM
HEIGHT: 2.350 MM
WEIGHT: 3.550 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-14'588 spindle hours (counter cabinet)
approx. 4'000 hours of program course (nc-a panel)

vintage: 04.2007 / commissioning: 05.2008

control: matsuura g-tech - 32i (fanuc)
traverse path x / y / z: 520 / 730 / 510 mm
spindle speed: 45 15'000 rpm
toolholder: bt 40
tool changers: 120 seats

machine dimensions w x d x h: ca. 4300 x 7000 x 3100 mm (footprint)
weight: ca. 15'000 kg

table:
-pallet size: 300 x 300 mm
-maximum load: 200 kg
-maximum workpiece size ã? x h 520 mm x 350 mm

tool:
-maximum diameter: ã?96 mm / ã?150 mm
-maximum length: 300 mm
-maximum weight: 10 kg
-tool change time: 1.1 sec

process areas:
a-axis: + 110â° ~ - 110â°
b-axis: 360â°

feeds:
x-axis: 50 / 50 m / min
y-axis: 50 / 50 m / min
z-axis: 50 / 50 m / min
a-axis: 30 min-1
c-axis: 50 min-1

special accessories of the machine:

extension of the tool magazine of standard 30 to 120 tool locations, including preparation for 240 tool places

pallet changer with 2 pallets

hsc spindle of 40 - 15'000 rpm with big-plus recording, motor: 18,5 kw, max torque: 108 nm / 1320 min-1

direct measuring system (heidenhain) for x, y, and z axes

knoll high performance radiator:
-scraper conveyor or schanierbandspã¤nefã¶rderer lifting pump with chip removal to the operating side
-coolant through the spindle with coolant pump kts25-50 tons and 17 l/min at 70 bar, 5.5 kw, coolant pressure in 3 steps selectable
-external cooling with coolant pump, capacity 100 l/min at 1.4 bar
-coolant shower with coolant pump, capacity 270 l/min at 2.3 bar
-hydrostatfilte hl-450, filter capacity 450 l/min, dimension of the total unit l x w x h approx. 2.4 x 1.7 x 2.3 m, tank capacity approx. 1,100 litres

measuring probe renishaw omp 60 for the automatic zero setting and measuring of workpieces, the tool changer in the interchangeable spindle. including easy trial software, pressure gauge for tool length measurement and tool breakage detection

8 free m functions
rotating viewing window

optional accessories for the control:

cutting force monitoring

boost the workpiece coordinate system from 6 to 54

corner chamfer and round

automatic zero point carrying

expansion of the macro variables on 100-199, 500-999

iz2/150nf hsc precision control for simultaneous 5-axis machining, consisting of:
-fast data server function
high speed precision contour control
-nano smoothing
-dynamic zero carrying, there are up to 8 different zero points to carry available
-tcpc tool center control for 5-axis simultaneous milling
-swing cycle allows you to edit on an inclined working plane

errors of technical data and intermediate sales reserved! 14'588 SPINDLE HOURS (COUNTER CABINET) APPROX. 4'000 HOURS OF PROGRAM COURSE (NC-A PANEL) VINTAGE: 04.2007 / COMMISSIONING: 05.2008 CONTROL: MATSUURA G-TECH - 32I (FANUC) TRAVERSE PATH X / Y / Z: 520 / 730 / 510 MM SPINDLE SPEED: 45 15'000 RPM TOOLHOLDER: BT 40 TOOL CHANGERS: 120 SEATS MACHINE DIMENSIONS W X D X H: CA. 4300 X 7000 X 3100 MM (FOOTPRINT) WEIGHT: CA. 15'000 KG TABLE: -PALLET SIZE: 300 X 300 MM -MAXIMUM LOAD: 200 KG -MAXIMUM WORKPIECE SIZE &ATILDE;? X H 520 MM X 350 MM TOOL: -MAXIMUM DIAMETER: &ATILDE;?96 MM / &ATILDE;?150 MM -MAXIMUM LENGTH: 300 MM -MAXIMUM WEIGHT: 10 KG -TOOL CHANGE TIME: 1.1 SEC PROCESS AREAS: A-AXIS: + 110&ACIRC;&DEG; ~ - 110&ACIRC;&DEG; B-AXIS: 360&ACIRC;&DEG; FEEDS: X-AXIS: 50 / 50 M / MIN Y-AXIS: 50 / 50 M / MIN Z-AXIS: 50 / 50 M / MIN A-AXIS: 30 MIN-1 C-AXIS: 50 MIN-1 SPECIAL ACCESSORIES OF THE MACHINE: EXTENSION OF THE TOOL MAGAZINE OF STANDARD 30 TO 120 TOOL LOCATIONS, INCLUDING PREPARATION FOR 240 TOOL PLACES PALLET CHANGER WITH 2 PALLETS HSC SPINDLE OF 40 - 15'000 RPM WITH BIG-PLUS RECORDING, MOTOR: 18,5 KW, MAX TORQUE: 108 NM / 1320 MIN-1 DIRECT MEASURING SYSTEM (HEIDENHAIN) FOR X, Y, AND Z AXES KNOLL HIGH PERFORMANCE RADIATOR: -SCRAPER CONVEYOR OR SCHANIERBANDSP&ATILDE;&CURREN;NEF&ATILDE;&PARA;RDERER LIFTING PUMP WITH CHIP REMOVAL TO THE OPERATING SIDE -COOLANT THROUGH THE SPINDLE WITH COOLANT PUMP KTS25-50 TONS AND 17 L/MIN AT 70 BAR, 5.5 KW, COOLANT PRESSURE IN 3 STEPS SELECTABLE -EXTERNAL COOLING WITH COOLANT PUMP, CAPACITY 100 L/MIN AT 1.4 BAR -COOLANT SHOWER WITH COOLANT PUMP, CAPACITY 270 L/MIN AT 2.3 BAR -HYDROSTATFILTE HL-450, FILTER CAPACITY 450 L/MIN, DIMENSION OF THE TOTAL UNIT L X W X H APPROX. 2.4 X 1.7 X 2.3 M, TANK CAPACITY APPROX. 1,100 LITRES MEASURING PROBE RENISHAW OMP 60 FOR THE AUTOMATIC ZERO SETTING AND MEASURING OF WORKPIECES, THE TOOL CHANGER IN THE INTERCHANGEABLE SPINDLE. INCLUDING EASY TRIAL SOFTWARE, PRESSURE GAUGE FOR TOOL LENGTH MEASUREMENT AND TOOL BREAKAGE DETECTION 8 FREE M FUNCTIONS ROTATING VIEWING WINDOW OPTIONAL ACCESSORIES FOR THE CONTROL: CUTTING FORCE MONITORING BOOST THE WORKPIECE COORDINATE SYSTEM FROM 6 TO 54 CORNER CHAMFER AND ROUND AUTOMATIC ZERO POINT CARRYING EXPANSION OF THE MACRO VARIABLES ON 100-199, 500-999 IZ2/150NF HSC PRECISION CONTROL FOR SIMULTANEOUS 5-AXIS MACHINING, CONSISTING OF: -FAST DATA SERVER FUNCTION HIGH SPEED PRECISION CONTOUR CONTROL -NANO SMOOTHING -DYNAMIC ZERO CARRYING, THERE ARE UP TO 8 DIFFERENT ZERO POINTS TO CARRY AVAILABLE -TCPC TOOL CENTER CONTROL FOR 5-AXIS SIMULTANEOUS MILLING -SWING CYCLE ALLOWS YOU TO EDIT ON AN INCLINED WORKING PLANE ERRORS OF TECHNICAL DATA AND INTERMEDIATE SALES RESERVED!
Vendedor: Müller-Maschinen AG
Año de construcción: usado
Precio: 12.850 €
Ubicación: Land-: 3.120 x 27 x 0,9 mm<br/>: 835 mm<br/>: 3.220 x 1.950 x 1.900 mm<br/>: 2.400 x 1.700 x 1.700 mm<br/>: 1.090 kg<br/>hydraulic, fully automatic bandsaw <br/> <br/>automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp <br/>automatic feed 600 mm/stroke,<br/>adjustment by handwheel, counter and limitswitch<br/>variable cutting pressure<br/>machine with 2 cutting speeds <br/>cutting fluid system <br/>automatic saw blade breakage detection <br/>quick clamping vice <br/>length stop 0-500 mm and material chute <br/>user manual in german <br/><br/><br/>alternative:<br/><br/>modell 370 ae 60° cnc euro  15.750,--<br/>as above model, but material feed and <br/>number of pieces by cnc<br/><br/>cutting capacity 90°: round 280 mm, square 240 mm, rectangular 330 x 240 mm<br/>cutting capacity 45°: round 225 mm, square 215 mm, rectangular 230 x 140 mm<br/>cutting capacity 60°: round 140 mm, square 140 mm, rectangular 140 x 130 mm<br/>cutting speed: 35/70 m/min<br/>motor: 0,9/1,5 kw<br/>band dimension: 3.120 x 27 x 0,9 mm<br/>working height: 835 mm<br/>measurements: length: 3.220 x 1.950 x 1.900 mm<br/>transport measurements: width: 2.400 x 1.700 x 1.700 mm<br/>weight: 1.090 kg<br/><br/><br/><br/> : 3.120 X 27 X 0,9 MM
: 835 MM
: 3.220 X 1.950 X 1.900 MM
: 2.400 X 1.700 X 1.700 MM
: 1.090 KG
HYDRAULIC, FULLY AUTOMATIC BANDSAW

AUTOMATIC CUTTING CYCLE CLAMPING, SAW BLADE AND CUTTING FLUID ON, CUTTING OPERATION, SAW BLADE AND CUTTING FLUID OFF, FAST RETURN STROKE, DECLAMP
AUTOMATIC FEED 600 MM/STROKE,
ADJUSTMENT BY HANDWHEEL, COUNTER AND LIMITSWITCH
VARIABLE CUTTING PRESSURE
MACHINE WITH 2 CUTTING SPEEDS
CUTTING FLUID SYSTEM
AUTOMATIC SAW BLADE BREAKAGE DETECTION
QUICK CLAMPING VICE
LENGTH STOP 0-500 MM AND MATERIAL CHUTE
USER MANUAL IN GERMAN


ALTERNATIVE:

MODELL 370 AE 60° CNC EURO  15.750,--
AS ABOVE MODEL, BUT MATERIAL FEED AND
NUMBER OF PIECES BY CNC

CUTTING CAPACITY 90°: ROUND 280 MM, SQUARE 240 MM, RECTANGULAR 330 X 240 MM
CUTTING CAPACITY 45°: ROUND 225 MM, SQUARE 215 MM, RECTANGULAR 230 X 140 MM
CUTTING CAPACITY 60°: ROUND 140 MM, SQUARE 140 MM, RECTANGULAR 140 X 130 MM
CUTTING SPEED: 35/70 M/MIN
MOTOR: 0,9/1,5 KW
BAND DIMENSION: 3.120 X 27 X 0,9 MM
WORKING HEIGHT: 835 MM
MEASUREMENTS: LENGTH: 3.220 X 1.950 X 1.900 MM
TRANSPORT MEASUREMENTS: WIDTH: 2.400 X 1.700 X 1.700 MM
WEIGHT: 1.090 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904687
number: 1 pcs.
manufacturer: sw
type: ba w04-22
control: siemens 840 d
year of manufacture: 2007
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 400 mm
travel in y (775) 500 mm
travel in z 425 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 14/14/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle/n
spindle distance 400 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 32 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 300 mm
maximum tool weight 10 kg
exciting to chip time 2.75 s
rotary pallet changer 2 fold
maximum workpiece weight per pallet 450 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
8 pcs. (2 x 4 pcs.) nc-controlled rotary table
bridge size 1030 mm
diameter of workpiece range 550 mm
2 set clamping bridge conditions
hydraulic clamping
2 additional / -r clamping circuit (s)

more facilities

preparation for ir workpiece measuring probe renishaw rmp-60
tool breakage control by means of laser
splash panel with fully encapsulated workspace
automatic work space door
lighting in the work area
preparation for central oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1200 mm
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
high pressure pump 70 bar
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
machine status light

general technical data

air connection 6 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine lxwxh) approx. 3680 x 5100 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4350 x 7000 x 3100 mm
machine weight 14500 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904687 NUMBER: 1 PCS. MANUFACTURER: SW TYPE: BA W04-22 CONTROL: SIEMENS 840 D YEAR OF MANUFACTURE: 2007 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 400 MM TRAVEL IN Y (775) 500 MM TRAVEL IN Z 425 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 14/14/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 &ATILDE;? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE/N SPINDLE DISTANCE 400 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 &ATILDE;? 32 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 10 KG EXCITING TO CHIP TIME 2.75 S ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET 450 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 8 PCS. (2 X 4 PCS.) NC-CONTROLLED ROTARY TABLE BRIDGE SIZE 1030 MM DIAMETER OF WORKPIECE RANGE 550 MM 2 SET CLAMPING BRIDGE CONDITIONS HYDRAULIC CLAMPING 2 ADDITIONAL / -R CLAMPING CIRCUIT (S) MORE FACILITIES PREPARATION FOR IR WORKPIECE MEASURING PROBE RENISHAW RMP-60 TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA PREPARATION FOR CENTRAL OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR CONNECTION 6 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE LXWXH) APPROX. 3680 X 5100 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4350 X 7000 X 3100 MM MACHINE WEIGHT 14500 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: 17.200 €
Ubicación: Land-: 3.270 x 27 x 0,9 mm<br/>: 835 mm<br/>: 2.800 x 2.000 x 1.900 mm<br/>: 2.400 x 1.700 x 1.700 mm<br/>: 1.090 kg<br/>hydraulic, fully automatic bandsaw <br/> <br/>automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp <br/>automatic feed 600 mm/stroke,<br/>adjustment by handwheel, counter and limitswitch<br/>variable cutting pressure. <br/>machine with 2 cutting speeds <br/>cutting fluid system <br/>automatic saw blade breakage detection <br/>quick clamping vice <br/>length stop 0-500 mm and material chute <br/>user manual in german <br/><br/><br/>alternative:<br/><br/>model 420 a 60° cnc        euro  22.200,--<br/>as obove model, but material feed and <br/>number of pieces by cnc<br/><br/> <br/><br/><br/><br/>cutting capacity 90°: round 300 mm, square 240 mm, rectangular 420 x 200 mm<br/>cutting capacity 45°: round 240 mm, square 230 mm, rectangular 270 x 140 mm<br/>cutting capacity 60°: round 170 mm, square 170 mm, rectangular 170 x 170 mm<br/>cutting speed: 35/70 m/min<br/>motor: 0,9/1,5 kw<br/>band dimension: 3.270 x 27 x 0,9 mm<br/>working height: 835 mm<br/>measurements: 2.800 x 2.000 x 1.900 mm<br/>transport measurements: 2.400 x 1.700 x 1.700 mm<br/>weight: 1.090 kg<br/><br/><br/><br/> : 3.270 X 27 X 0,9 MM
: 835 MM
: 2.800 X 2.000 X 1.900 MM
: 2.400 X 1.700 X 1.700 MM
: 1.090 KG
HYDRAULIC, FULLY AUTOMATIC BANDSAW

AUTOMATIC CUTTING CYCLE CLAMPING, SAW BLADE AND CUTTING FLUID ON, CUTTING OPERATION, SAW BLADE AND CUTTING FLUID OFF, FAST RETURN STROKE, DECLAMP
AUTOMATIC FEED 600 MM/STROKE,
ADJUSTMENT BY HANDWHEEL, COUNTER AND LIMITSWITCH
VARIABLE CUTTING PRESSURE.
MACHINE WITH 2 CUTTING SPEEDS
CUTTING FLUID SYSTEM
AUTOMATIC SAW BLADE BREAKAGE DETECTION
QUICK CLAMPING VICE
LENGTH STOP 0-500 MM AND MATERIAL CHUTE
USER MANUAL IN GERMAN


ALTERNATIVE:

MODEL 420 A 60° CNC        EURO  22.200,--
AS OBOVE MODEL, BUT MATERIAL FEED AND
NUMBER OF PIECES BY CNC





CUTTING CAPACITY 90°: ROUND 300 MM, SQUARE 240 MM, RECTANGULAR 420 X 200 MM
CUTTING CAPACITY 45°: ROUND 240 MM, SQUARE 230 MM, RECTANGULAR 270 X 140 MM
CUTTING CAPACITY 60°: ROUND 170 MM, SQUARE 170 MM, RECTANGULAR 170 X 170 MM
CUTTING SPEED: 35/70 M/MIN
MOTOR: 0,9/1,5 KW
BAND DIMENSION: 3.270 X 27 X 0,9 MM
WORKING HEIGHT: 835 MM
MEASUREMENTS: 2.800 X 2.000 X 1.900 MM
TRANSPORT MEASUREMENTS: 2.400 X 1.700 X 1.700 MM
WEIGHT: 1.090 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-x-travel: 1600mm, y-travel: 6000mm, z-travel: 300mm, a-travel: 540°, b-travel: 190°, x/ y-travel feed rate: 30m/min, z-travel: 10m/min, tool mount: sk 40, power: 8kw, rotational speed: 1000-17000/min, number of tool slots: 32, max. tool diameter: 90mm.  X-TRAVEL: 1600MM, Y-TRAVEL: 6000MM, Z-TRAVEL: 300MM, A-TRAVEL: 540°, B-TRAVEL: 190°, X/ Y-TRAVEL FEED RATE: 30M/MIN, Z-TRAVEL: 10M/MIN, TOOL MOUNT: SK 40, POWER: 8KW, ROTATIONAL SPEED: 1000-17000/MIN, NUMBER OF TOOL SLOTS: 32, MAX. TOOL DIAMETER: 90MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 60.210 €
Ubicación: Land-: 4.050 mm<br/>: 175 to<br/>: 18,5 kw<br/>: 5.250 mm<br/>: 1.700 mm<br/>: 2.750 mm<br/>: 12.850 ~  kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table<br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 6.680,--   quick connecting terminals for the upper tool ? 500,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 4.050 mm <br/>bending force: 175 to <br/>axes: y1 / y2 and x axes<br/>upper tool: 75° divided <br/>lower tool: 4 v- die 16,22,35 and 50 mm <br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 18,5 kw <br/>length: 5.250 mm <br/>width: 1.700 mm <br/>height: 2.750 mm<br/>weight: ~ 12.850 kg<br/><br/><br/><br/> : 4.050 MM
: 175 TO
: 18,5 KW
: 5.250 MM
: 1.700 MM
: 2.750 MM
: 12.850 ~ KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 6.680,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 500,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 4.050 MM
BENDING FORCE: 175 TO
AXES: Y1 / Y2 AND X AXES
UPPER TOOL: 75° DIVIDED
LOWER TOOL: 4 V- DIE 16,22,35 AND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 18,5 KW
LENGTH: 5.250 MM
WIDTH: 1.700 MM
HEIGHT: 2.750 MM
WEIGHT: ~ 12.850 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-x: 800 mm
y: 400 mm
z: 350 mm
tool holder: hsk 63
distance spindle - table: 265 mm / max 615 mm
forward speed: 10 m / min
speed range: 36-12000 rpm
tool changer: 78-fold
max tool diameter: 125 mm
maximum tool length: 250 mm
control: siemens sinumerik 840 d
chip conveyor
paper band filter
coolant system

total: 36.5 kw
machine weight: 7000 kg
dimensions (w x d x h): 5.2 x 5.6 x 3.3 m

condition: good, ready for operation

accessories: 
blum laserstystem tool setting and breakage detection
blum measuring switch
tray made of stainless steel sheet
various tool holder
operating instructions / schematics / programmer's guide / other documents
  X: 800 MM Y: 400 MM Z: 350 MM TOOL HOLDER: HSK 63 DISTANCE SPINDLE - TABLE: 265 MM / MAX 615 MM FORWARD SPEED: 10 M / MIN SPEED RANGE: 36-12000 RPM TOOL CHANGER: 78-FOLD MAX TOOL DIAMETER: 125 MM MAXIMUM TOOL LENGTH: 250 MM CONTROL: SIEMENS SINUMERIK 840 D CHIP CONVEYOR PAPER BAND FILTER COOLANT SYSTEM TOTAL: 36.5 KW MACHINE WEIGHT: 7000 KG DIMENSIONS (W X D X H): 5.2 X 5.6 X 3.3 M CONDITION: GOOD, READY FOR OPERATION ACCESSORIES: BLUM LASERSTYSTEM TOOL SETTING AND BREAKAGE DETECTION BLUM MEASURING SWITCH TRAY MADE OF STAINLESS STEEL SHEET VARIOUS TOOL HOLDER OPERATING INSTRUCTIONS / SCHEMATICS / PROGRAMMER'S GUIDE / OTHER DOCUMENTS
Vendedor: Alfred Feldmann Werkzeugmaschinen
Año de construcción: usado
Precio: 11.800 €
Ubicación: Land-: 3.010 x 27 x 0,9 mm<br/>: 835 mm<br/>: 3.220 x 1950 x 1900 mm<br/>: 2.400 x 1.700 x 1.700 mm<br/>: 1.090 kg<br/>hydraulic, fully automatic bandsaw <br/> <br/>automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp <br/>automatic feed 600 mm/stroke,<br/>adjustment by handwheel, counter and limitswitch<br/>variable cutting pressure. <br/>machine with 2 cutting speeds <br/>cutting fluid system <br/>automatic saw blade breakage detection <br/>quick clamping vice <br/>length stop 0-500 mm and material chute <br/>user manual in german <br/><br/><br/>alternative:<br/><br/>modell 330 ae 60° cnc euro  14.350,--<br/>as above model, but material feed and <br/>number of pieces by cnc<br/><br/>cutting capacity 90°: round 260 mm, square 240 mm, rectangular 330 x 120 mm<br/>cutting capacity 45°: round 200 mm, square 190 mm, rectangular 200 x 130 mm<br/>cutting capacity 60°: round 120 mm, square 115 mm, rectangular 120 x 100 mm<br/>cutting speed: 35/70 m/min<br/>motor: 0,9/1,5 kw<br/>band dimension: 3.010 x 27 x 0,9 mm<br/>working height: 835 mm<br/>measurements: length: 3.220 x 1950 x 1900 mm<br/>transport measurements: width: 2.400 x 1.700 x 1.700 mm<br/>weight: 1.090 kg<br/><br/><br/><br/> : 3.010 X 27 X 0,9 MM
: 835 MM
: 3.220 X 1950 X 1900 MM
: 2.400 X 1.700 X 1.700 MM
: 1.090 KG
HYDRAULIC, FULLY AUTOMATIC BANDSAW

AUTOMATIC CUTTING CYCLE CLAMPING, SAW BLADE AND CUTTING FLUID ON, CUTTING OPERATION, SAW BLADE AND CUTTING FLUID OFF, FAST RETURN STROKE, DECLAMP
AUTOMATIC FEED 600 MM/STROKE,
ADJUSTMENT BY HANDWHEEL, COUNTER AND LIMITSWITCH
VARIABLE CUTTING PRESSURE.
MACHINE WITH 2 CUTTING SPEEDS
CUTTING FLUID SYSTEM
AUTOMATIC SAW BLADE BREAKAGE DETECTION
QUICK CLAMPING VICE
LENGTH STOP 0-500 MM AND MATERIAL CHUTE
USER MANUAL IN GERMAN


ALTERNATIVE:

MODELL 330 AE 60° CNC EURO  14.350,--
AS ABOVE MODEL, BUT MATERIAL FEED AND
NUMBER OF PIECES BY CNC

CUTTING CAPACITY 90°: ROUND 260 MM, SQUARE 240 MM, RECTANGULAR 330 X 120 MM
CUTTING CAPACITY 45°: ROUND 200 MM, SQUARE 190 MM, RECTANGULAR 200 X 130 MM
CUTTING CAPACITY 60°: ROUND 120 MM, SQUARE 115 MM, RECTANGULAR 120 X 100 MM
CUTTING SPEED: 35/70 M/MIN
MOTOR: 0,9/1,5 KW
BAND DIMENSION: 3.010 X 27 X 0,9 MM
WORKING HEIGHT: 835 MM
MEASUREMENTS: LENGTH: 3.220 X 1950 X 1900 MM
TRANSPORT MEASUREMENTS: WIDTH: 2.400 X 1.700 X 1.700 MM
WEIGHT: 1.090 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-chip conveyor tanaka type 400 27-02-002 delivery time: immediate number: 27-02-002 manufacturer: tanaka type: 400

machine data year: approx. 1988 l x w x h: approx. 2400 x 700 x 1400 mm weight: approx. 300 kg

good general condition specifications type: hinged conveyor - conveyor dimensions tray: length: approx. 1200 mm width: 520 mm height: approx. 150 mm bandwidth: approx. 400 mm band length: discharge height of approx. 1200 mm: approx. 900 mm accessories selector forward / back & s top accessories on request price and other specifications on request CHIP CONVEYOR TANAKA TYPE 400 27-02-002 DELIVERY TIME: IMMEDIATE NUMBER: 27-02-002 MANUFACTURER: TANAKA TYPE: 400 MACHINE DATA YEAR: APPROX. 1988 L X W X H: APPROX. 2400 X 700 X 1400 MM WEIGHT: APPROX. 300 KG GOOD GENERAL CONDITION SPECIFICATIONS TYPE: HINGED CONVEYOR - CONVEYOR DIMENSIONS TRAY: LENGTH: APPROX. 1200 MM WIDTH: 520 MM HEIGHT: APPROX. 150 MM BANDWIDTH: APPROX. 400 MM BAND LENGTH: DISCHARGE HEIGHT OF APPROX. 1200 MM: APPROX. 900 MM ACCESSORIES SELECTOR FORWARD / BACK & S TOP ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: 50.710 €
Ubicación: Land-: 3.050 mm<br/>: 175 to<br/>: 18,5 kw<br/>: 2.600 mm<br/>: 265 mm<br/>: 530 mm<br/>: 104 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 4.250 mm<br/>: 1.700 mm<br/>: 2.750 mm<br/>: 11.500 kg<br/>3 axes (y1, y2, x) <br/>cnc dt-15<br/>- 2d grafic display 15",<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 5.960,--   quick connecting terminals for the upper tool ? 380,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 620 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm<br/>bending force: 175 to<br/>axis: 3 (y1, y2, x)<br/>upper tool: yes<br/>lower tool: yes<br/>anti deflection: ja<br/>back gauge: cnc conrolled<br/>motor power: 18,5 kw<br/>distance between columns: 2.600 mm<br/>stroke: 265 mm<br/>daylight: 530 mm<br/>table width: 104 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 4.250 mm<br/>width: 1.700 mm<br/>height: 2.750 mm<br/>weight: 11.500 kg<br/><br/><br/><br/> : 3.050 MM
: 175 TO
: 18,5 KW
: 2.600 MM
: 265 MM
: 530 MM
: 104 MM
: 900 MM
: 410 MM
: 650 MM
: 4.250 MM
: 1.700 MM
: 2.750 MM
: 11.500 KG
3 AXES (Y1, Y2, X) 
CNC DT-15
- 2D GRAFIC DISPLAY 15",
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:

CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 5.960,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 380,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 620 REFERENCES!






BENDING LENGTH: 3.050 MM
BENDING FORCE: 175 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: JA
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 18,5 KW
DISTANCE BETWEEN COLUMNS: 2.600 MM
STROKE: 265 MM
DAYLIGHT: 530 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 4.250 MM
WIDTH: 1.700 MM
HEIGHT: 2.750 MM
WEIGHT: 11.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-travel: axis 1,050 mm
y axis 560 mm
z axis 450 mm
spindle nose-table: 160-610 mm
maximum workpiece weight: 700 kg
table size: 560 x 1,300 mm
table height above floor: 800 mm
recording: mas bt50
tool magazine: 32 - professional
spindle speed: 50-6000 rpm

accessories
-internal coolant filter system
-tool breakage detection
-prepared for b-axis

(b-axis can be offered optional)

floor space requirements
approximately l: 3.00 m b: 2.70 m, h: 2.70 m
weight: approx. 7,100 kg TRAVEL: AXIS 1,050 MM Y AXIS 560 MM Z AXIS 450 MM SPINDLE NOSE-TABLE: 160-610 MM MAXIMUM WORKPIECE WEIGHT: 700 KG TABLE SIZE: 560 X 1,300 MM TABLE HEIGHT ABOVE FLOOR: 800 MM RECORDING: MAS BT50 TOOL MAGAZINE: 32 - PROFESSIONAL SPINDLE SPEED: 50-6000 RPM ACCESSORIES -INTERNAL COOLANT FILTER SYSTEM -TOOL BREAKAGE DETECTION -PREPARED FOR B-AXIS (B-AXIS CAN BE OFFERED OPTIONAL) FLOOR SPACE REQUIREMENTS APPROXIMATELY L: 3.00 M B: 2.70 M, H: 2.70 M WEIGHT: APPROX. 7,100 KG
Vendedor: Aloysius Garwels Maschinenbau GmbH
Año de construcción: usado
Precio: 56.670 €
Ubicación: Land-: 3.050 mm<br/>: 175 to<br/>: 18,5 kw<br/>: 2.600 mm<br/>: 265 mm<br/>: 530 mm<br/>: 104 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 4.250 mm<br/>: 1.700 mm<br/>: 2.750 mm<br/>: 11.500 kg<br/>4 axes (y1, y2, x, r) <br/>cnc dt-15<br/>- 2d grafic display 15",<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis included   quick connecting terminals for the upper tool ? 380,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 620 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm<br/>bending force: 175 to<br/>axis: 4 (y1, y2, x, r)<br/>upper tool: yes<br/>lower tool: yes<br/>anti deflection: ja<br/>back gauge: cnc conrolled<br/>motor power: 18,5 kw<br/>distance between columns: 2.600 mm<br/>stroke: 265 mm<br/>daylight: 530 mm<br/>table width: 104 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 4.250 mm<br/>width: 1.700 mm<br/>height: 2.750 mm<br/>weight: 11.500 kg<br/><br/><br/><br/> : 3.050 MM
: 175 TO
: 18,5 KW
: 2.600 MM
: 265 MM
: 530 MM
: 104 MM
: 900 MM
: 410 MM
: 650 MM
: 4.250 MM
: 1.700 MM
: 2.750 MM
: 11.500 KG
4 AXES (Y1, Y2, X, R) 
CNC DT-15
- 2D GRAFIC DISPLAY 15",
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:

CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS INCLUDED QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 380,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 620 REFERENCES!






BENDING LENGTH: 3.050 MM
BENDING FORCE: 175 TO
AXIS: 4 (Y1, Y2, X, R)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: JA
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 18,5 KW
DISTANCE BETWEEN COLUMNS: 2.600 MM
STROKE: 265 MM
DAYLIGHT: 530 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 4.250 MM
WIDTH: 1.700 MM
HEIGHT: 2.750 MM
WEIGHT: 11.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 22.000 €
Ubicación: Land-wyssbrod 3-spindle machining centre
type: mc510-3n
control: siemens, fanuc
year of construction: 1986

technical data:

procedures:

x axis: 500 mm
y-axis: 300 mm
z-axis: 400 mm

tool magazine for 72 tools
sk30 spindle with 7000 1/min
drives company: bosch-rexroth intramat
part of apparatus including hydraulic tailstock (3-spindle) tool breakage detection

the machine has an integrated handling (parts are automatically loading and unloading gripper and conveyor)

machine completely but without clamping tools and tool holders: 22,000â?¬ + vat

machine completely including existing spare parts including clamping device for toolholders (about 200 pieces), gripper, 4th axis, tool cabinet for sk30 and angle heads: â?¬27.000

the machine is fully functional and can be seen currently still under power.
machine is in good condition.
we love to hear from you. WYSSBROD 3-SPINDLE MACHINING CENTRE TYPE: MC510-3N CONTROL: SIEMENS, FANUC YEAR OF CONSTRUCTION: 1986 TECHNICAL DATA: PROCEDURES: X AXIS: 500 MM Y-AXIS: 300 MM Z-AXIS: 400 MM TOOL MAGAZINE FOR 72 TOOLS SK30 SPINDLE WITH 7000 1/MIN DRIVES COMPANY: BOSCH-REXROTH INTRAMAT PART OF APPARATUS INCLUDING HYDRAULIC TAILSTOCK (3-SPINDLE) TOOL BREAKAGE DETECTION THE MACHINE HAS AN INTEGRATED HANDLING (PARTS ARE AUTOMATICALLY LOADING AND UNLOADING GRIPPER AND CONVEYOR) MACHINE COMPLETELY BUT WITHOUT CLAMPING TOOLS AND TOOL HOLDERS: 22,000&ACIRC;?&NOT; + VAT MACHINE COMPLETELY INCLUDING EXISTING SPARE PARTS INCLUDING CLAMPING DEVICE FOR TOOLHOLDERS (ABOUT 200 PIECES), GRIPPER, 4TH AXIS, TOOL CABINET FOR SK30 AND ANGLE HEADS: &ACIRC;?&NOT;27.000 THE MACHINE IS FULLY FUNCTIONAL AND CAN BE SEEN CURRENTLY STILL UNDER POWER. MACHINE IS IN GOOD CONDITION. WE LOVE TO HEAR FROM YOU.
Vendedor: W&T EFRA
Año de construcción: usado
Ubicación: Land-pressure:300 t<br/>chamfer lenght:4300 mm<br/>distance between columns:3700 mm<br/>stroke:400 mm<br/>dayligth:650 mm<br/>throat:400 mm<br/>ajustment speed:180 mm/sec<br/>working feed:0 - 10 mm/sec<br/>return speed:115 mm/sec<br/>total power requirement:30 kw<br/>weight of the machine ca.:26 t<br/>dimensions of the machine ca.:5,3 x 2,0 x 3,55 m<br/>tank capacity:345 l<br/>back stop - adjustable:750 mm<br/>capacity r-axis:150 mm<br/><br/>x and r controlled backstop type bga x axis for the insertion depth, travel range 750 mm positioning accuracy x-axis +/- 0.05 mm travel speed x-axis 500 mm / sec r-axis for the finger height, travel range 150 mm positioning accuracy r-axis +/- 0.02 mm travel speed r-axis 170 mm / sec front and back lighting electrical components: schneider electricsa (telemecanique) hydraulic components: ce safety device according to din 12622: 2001 front with laser beam on the upper tool manufacturer fiessler model akas lc-ii m backside with light curtain manufacturer pilz model 630765 type 4 security plc manufacturer fiessler model fpsc foot switch with safety pallets ce - mark and ce - declaration of conformity german manual  delem 3-d control unit da69t touchscreen version with mobile control panel 3d touchscreen control with lcd color display - 17 inch tft, high brightness - 1280 x 1024 pixels, 32 bit color - full touchscreen control (ir-touch) - storage capacity 1 gb - 3d graphical acceleration equipment: - 2d graphical touch screen programming - 3d representation in simulation and production - 17-inch tft color display with high resolution - complete windows application suite - compatible with delem modusys - usb, peripheral interface - open system architecture - sensor bending and correction interface programming - alphanumeric product name - product programming and presentation in real size - automatic calculation of a bending sequence - flat-push product programming - a page programming table - graphic product and tool selection - free material properties - free material programming - product counter - product notes tools - graphical tool configuration - multiple tool stations - tool segmentation - alphanum. tool identification - free graphical tool programming - flat and radius tools - support tool adapter calculation - tool safety zones - pressing force - bending tolerance - camber adjustment - extended length - embossing force, flat pressing, automatic round bending calculation - radius programming - bending tolerance table - learned angle correction  digital angle measuring device with angle correction react for press brakes, prl / prcn / prcb series with control delem da58t, da66t and da69t. angle gauge with direct cabling measuring the bent angles with feedback to the control - this calculates the necessary correction value. transfer of the data to the cnc control by cable the usb port on the control front  basic backrest version bga with additional r-axis for press brakes hezinger-pressline, prcn series type of backstop type bga adjustment speed x-axis 500 mm / sec positioning accuracy x-axis +/- 0.05 mm adjustment range r-axis stepless 150 mm adjustment speed r-axis 170 mm / sec positioning accuracy +/- 0.20 mm repeatability + / - 0.20 mm stop finger with 2 bearing surfaces  rear stop with additional z1-z2 axle version x-r-z1-z2 independent positioning of the stop fingers in the width travel range z1-z2 approx. 3000 mm travel speed 2000 mm / sec positioning accuracy + / - 0,10 mm repeatability + / - 0,10 mm type of backstop type bga stop finger with 2 bearing surfaces  pneumatic support arms with ball rollers for support of the inserted sheets installed on the backstops suitable for controlled r-axes activation and deactivation via cnc control area of ??application max. 300 mm  cnc bending aid system for press brakes, 2 motor units data input via cnc control, load at approx. 360 kg / unit working range approx. 900 to 1,500 mm width per arm approx. 350 mm height adjustment +/- 60 mm depth adjustment 0-60 mm laterally adjustable over the entire machine length support arms with ball circulating spindles and linear motors accuracy at +/- 0.2 mm in the range of 0 - 60 ° including a parking position for one edition on the right and on the left  cnc crowning for cnc press brakes hezinger-pressline prcn / prcb / prl series wedge camber integrated in the wila system in the table no loss of installation height adjustment via electric servomotor, controlled by the cnc control  hydraulic upper tool clamping wila new standard for press brakes hezinger-pressline - fastest tool change -automatic clamping, adjustment and alignment -individual clamping of the individual segments -vertical and horizontal tool change including hydraulic unit folding length 4.300 mm load capacity per meter 1,800 kn / m PRESSURE:300 T
CHAMFER LENGHT:4300 MM
DISTANCE BETWEEN COLUMNS:3700 MM
STROKE:400 MM
DAYLIGTH:650 MM
THROAT:400 MM
AJUSTMENT SPEED:180 MM/SEC
WORKING FEED:0 - 10 MM/SEC
RETURN SPEED:115 MM/SEC
TOTAL POWER REQUIREMENT:30 KW
WEIGHT OF THE MACHINE CA.:26 T
DIMENSIONS OF THE MACHINE CA.:5,3 X 2,0 X 3,55 M
TANK CAPACITY:345 L
BACK STOP - ADJUSTABLE:750 MM
CAPACITY R-AXIS:150 MM

X AND R CONTROLLED BACKSTOP TYPE BGA X AXIS FOR THE INSERTION DEPTH, TRAVEL RANGE 750 MM POSITIONING ACCURACY X-AXIS +/- 0.05 MM TRAVEL SPEED X-AXIS 500 MM / SEC R-AXIS FOR THE FINGER HEIGHT, TRAVEL RANGE 150 MM POSITIONING ACCURACY R-AXIS +/- 0.02 MM TRAVEL SPEED R-AXIS 170 MM / SEC FRONT AND BACK LIGHTING ELECTRICAL COMPONENTS: SCHNEIDER ELECTRICSA (TELEMECANIQUE) HYDRAULIC COMPONENTS: CE SAFETY DEVICE ACCORDING TO DIN 12622: 2001 FRONT WITH LASER BEAM ON THE UPPER TOOL MANUFACTURER FIESSLER MODEL AKAS LC-II M BACKSIDE WITH LIGHT CURTAIN MANUFACTURER PILZ MODEL 630765 TYPE 4 SECURITY PLC MANUFACTURER FIESSLER MODEL FPSC FOOT SWITCH WITH SAFETY PALLETS CE - MARK AND CE - DECLARATION OF CONFORMITY GERMAN MANUAL DELEM 3-D CONTROL UNIT DA69T TOUCHSCREEN VERSION WITH MOBILE CONTROL PANEL 3D TOUCHSCREEN CONTROL WITH LCD COLOR DISPLAY - 17 INCH TFT, HIGH BRIGHTNESS - 1280 X 1024 PIXELS, 32 BIT COLOR - FULL TOUCHSCREEN CONTROL (IR-TOUCH) - STORAGE CAPACITY 1 GB - 3D GRAPHICAL ACCELERATION EQUIPMENT: - 2D GRAPHICAL TOUCH SCREEN PROGRAMMING - 3D REPRESENTATION IN SIMULATION AND PRODUCTION - 17-INCH TFT COLOR DISPLAY WITH HIGH RESOLUTION - COMPLETE WINDOWS APPLICATION SUITE - COMPATIBLE WITH DELEM MODUSYS - USB, PERIPHERAL INTERFACE - OPEN SYSTEM ARCHITECTURE - SENSOR BENDING AND CORRECTION INTERFACE PROGRAMMING - ALPHANUMERIC PRODUCT NAME - PRODUCT PROGRAMMING AND PRESENTATION IN REAL SIZE - AUTOMATIC CALCULATION OF A BENDING SEQUENCE - FLAT-PUSH PRODUCT PROGRAMMING - A PAGE PROGRAMMING TABLE - GRAPHIC PRODUCT AND TOOL SELECTION - FREE MATERIAL PROPERTIES - FREE MATERIAL PROGRAMMING - PRODUCT COUNTER - PRODUCT NOTES TOOLS - GRAPHICAL TOOL CONFIGURATION - MULTIPLE TOOL STATIONS - TOOL SEGMENTATION - ALPHANUM. TOOL IDENTIFICATION - FREE GRAPHICAL TOOL PROGRAMMING - FLAT AND RADIUS TOOLS - SUPPORT TOOL ADAPTER CALCULATION - TOOL SAFETY ZONES - PRESSING FORCE - BENDING TOLERANCE - CAMBER ADJUSTMENT - EXTENDED LENGTH - EMBOSSING FORCE, FLAT PRESSING, AUTOMATIC ROUND BENDING CALCULATION - RADIUS PROGRAMMING - BENDING TOLERANCE TABLE - LEARNED ANGLE CORRECTION DIGITAL ANGLE MEASURING DEVICE WITH ANGLE CORRECTION REACT FOR PRESS BRAKES, PRL / PRCN / PRCB SERIES WITH CONTROL DELEM DA58T, DA66T AND DA69T. ANGLE GAUGE WITH DIRECT CABLING MEASURING THE BENT ANGLES WITH FEEDBACK TO THE CONTROL - THIS CALCULATES THE NECESSARY CORRECTION VALUE. TRANSFER OF THE DATA TO THE CNC CONTROL BY CABLE THE USB PORT ON THE CONTROL FRONT BASIC BACKREST VERSION BGA WITH ADDITIONAL R-AXIS FOR PRESS BRAKES HEZINGER-PRESSLINE, PRCN SERIES TYPE OF BACKSTOP TYPE BGA ADJUSTMENT SPEED X-AXIS 500 MM / SEC POSITIONING ACCURACY X-AXIS +/- 0.05 MM ADJUSTMENT RANGE R-AXIS STEPLESS 150 MM ADJUSTMENT SPEED R-AXIS 170 MM / SEC POSITIONING ACCURACY +/- 0.20 MM REPEATABILITY + / - 0.20 MM STOP FINGER WITH 2 BEARING SURFACES REAR STOP WITH ADDITIONAL Z1-Z2 AXLE VERSION X-R-Z1-Z2 INDEPENDENT POSITIONING OF THE STOP FINGERS IN THE WIDTH TRAVEL RANGE Z1-Z2 APPROX. 3000 MM TRAVEL SPEED 2000 MM / SEC POSITIONING ACCURACY + / - 0,10 MM REPEATABILITY + / - 0,10 MM TYPE OF BACKSTOP TYPE BGA STOP FINGER WITH 2 BEARING SURFACES PNEUMATIC SUPPORT ARMS WITH BALL ROLLERS FOR SUPPORT OF THE INSERTED SHEETS INSTALLED ON THE BACKSTOPS SUITABLE FOR CONTROLLED R-AXES ACTIVATION AND DEACTIVATION VIA CNC CONTROL AREA OF ??APPLICATION MAX. 300 MM CNC BENDING AID SYSTEM FOR PRESS BRAKES, 2 MOTOR UNITS DATA INPUT VIA CNC CONTROL, LOAD AT APPROX. 360 KG / UNIT WORKING RANGE APPROX. 900 TO 1,500 MM WIDTH PER ARM APPROX. 350 MM HEIGHT ADJUSTMENT +/- 60 MM DEPTH ADJUSTMENT 0-60 MM LATERALLY ADJUSTABLE OVER THE ENTIRE MACHINE LENGTH SUPPORT ARMS WITH BALL CIRCULATING SPINDLES AND LINEAR MOTORS ACCURACY AT +/- 0.2 MM IN THE RANGE OF 0 - 60 ° INCLUDING A PARKING POSITION FOR ONE EDITION ON THE RIGHT AND ON THE LEFT CNC CROWNING FOR CNC PRESS BRAKES HEZINGER-PRESSLINE PRCN / PRCB / PRL SERIES WEDGE CAMBER INTEGRATED IN THE WILA SYSTEM IN THE TABLE NO LOSS OF INSTALLATION HEIGHT ADJUSTMENT VIA ELECTRIC SERVOMOTOR, CONTROLLED BY THE CNC CONTROL HYDRAULIC UPPER TOOL CLAMPING WILA NEW STANDARD FOR PRESS BRAKES HEZINGER-PRESSLINE - FASTEST TOOL CHANGE -AUTOMATIC CLAMPING, ADJUSTMENT AND ALIGNMENT -INDIVIDUAL CLAMPING OF THE INDIVIDUAL SEGMENTS -VERTICAL AND HORIZONTAL TOOL CHANGE INCLUDING HYDRAULIC UNIT FOLDING LENGTH 4.300 MM LOAD CAPACITY PER METER 1,800 KN / M
Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 700 mm<br/>y-travel: 630 mm<br/>z-travel: 700 mm<br/>spindle speed:: 10000 u/min<br/>tool taper: sk 40 <br/>tool changer: 40 plätze<br/>size of pallet: 500 x 500 mm<br/>feeds x/y/z: 1 - 50.000 mm/min<br/>total power requirement: 27 kw<br/>weight of the machine ca.: 12,5 t<br/>dimensions of the machine ca.: 7,45 x 4,8 x 2,85 m<br/>very good condition - still in the production company<br/><br/>connection hours 23.500 h<br/>spindle hours 9.500 h<br/><br/>- with 2 - times pallet changer <br/>- drill breakage control<br/>- inner coolant suply 40 bar <br/>- chip conveyor<br/>- coolant device with paper filter<br/>- documentation<br/><br/><br/><br/><br/> X-TRAVEL: 700 MM
Y-TRAVEL: 630 MM
Z-TRAVEL: 700 MM
SPINDLE SPEED:: 10000 U/MIN
TOOL TAPER: SK 40
TOOL CHANGER: 40 PLäTZE
SIZE OF PALLET: 500 X 500 MM
FEEDS X/Y/Z: 1 - 50.000 MM/MIN
TOTAL POWER REQUIREMENT: 27 KW
WEIGHT OF THE MACHINE CA.: 12,5 T
DIMENSIONS OF THE MACHINE CA.: 7,45 X 4,8 X 2,85 M
VERY GOOD CONDITION - STILL IN THE PRODUCTION COMPANY

CONNECTION HOURS 23.500 H
SPINDLE HOURS 9.500 H

- WITH 2 - TIMES PALLET CHANGER
- DRILL BREAKAGE CONTROL
- INNER COOLANT SUPLY 40 BAR
- CHIP CONVEYOR
- COOLANT DEVICE WITH PAPER FILTER
- DOCUMENTATION




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 1 kg<br/>dimensions (l x w x h) approx.: 1 x 1 x 1 mm<br/>description: <h3>production cell, consisting of two machining centres heckert cwk 500 d and fastems linear pallet storage</h3> <br> <br> <i><b>1 x machining center heckert</b></i><br> <br> year of construction 2001/ in 2013 new spindle<br> with:<br> - siemens sinumerik 840 d control unit<br> - nc rotary table<br> - traverse x/y/z: 750/750/700 mm<br> - spindle speed up to 15000 rpm<br> - 80-fold tool changer hsk-a63,<br> - ikz 50 bar,<br> - renishaw touch probe,<br> - tool breakage control.<br> <br> <i><b>1 x machining center heckert</b></i><br> year of construction 2006<br> with:<br> - torque support (retrofitted)<br> - siemens sinumerik 840 d control unit<br> - nc rotary table<br> - travel x/y/z: 750/750/700 mm<br> - spindle speed up to 15000 rpm<br> - 80-station tool changer hsk-a63<br> - ikz 50 bar<br> - measuring probe renishaw<br> - tool breakage control<br> <br> <i><b>1 x fastems fpc 750</b></i><br> year of construction 2004<br> - 24 pallets total available<br> - 20 pallet storage spaces<br> - machine interface for heckert.<br> WEIGHT APPROX.: 1 KG
DIMENSIONS (L X W X H) APPROX.: 1 X 1 X 1 MM
DESCRIPTION:

PRODUCTION CELL, CONSISTING OF TWO MACHINING CENTRES HECKERT CWK 500 D AND FASTEMS LINEAR PALLET STORAGE



1 X MACHINING CENTER HECKERT

YEAR OF CONSTRUCTION 2001/ IN 2013 NEW SPINDLE
WITH:
- SIEMENS SINUMERIK 840 D CONTROL UNIT
- NC ROTARY TABLE
- TRAVERSE X/Y/Z: 750/750/700 MM
- SPINDLE SPEED UP TO 15000 RPM
- 80-FOLD TOOL CHANGER HSK-A63,
- IKZ 50 BAR,
- RENISHAW TOUCH PROBE,
- TOOL BREAKAGE CONTROL.

1 X MACHINING CENTER HECKERT
YEAR OF CONSTRUCTION 2006
WITH:
- TORQUE SUPPORT (RETROFITTED)
- SIEMENS SINUMERIK 840 D CONTROL UNIT
- NC ROTARY TABLE
- TRAVEL X/Y/Z: 750/750/700 MM
- SPINDLE SPEED UP TO 15000 RPM
- 80-STATION TOOL CHANGER HSK-A63
- IKZ 50 BAR
- MEASURING PROBE RENISHAW
- TOOL BREAKAGE CONTROL

1 X FASTEMS FPC 750
YEAR OF CONSTRUCTION 2004
- 24 PALLETS TOTAL AVAILABLE
- 20 PALLET STORAGE SPACES
- MACHINE INTERFACE FOR HECKERT.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cutting diameter: 260 mm<br/>saw band length: 3700 mm<br/>cutting width: 400 mm<br/>cutting speed: 20 - 180 m/min<br/>cutting range rectangle: 400 x 155 / 300 x 220 mm<br/>capacity 90 degrees: square: 250 x 250 mm<br/>capacity 45 degrees: round: 170 mm<br/>capacy 45°: rectangle: 160 x 145 / 120 x 240 mm<br/>work height max.: 710 mm<br/>total power requirement: 1,5 kw<br/>weight of the machine ca.: 390 kg<br/>dimensions of the machine ca.: 1,8 x 0,65 m<br/>electric 380 volt:  <br/>cooling equipment:  <br/>material support:  <br/>positioning rod:  <br/>horizontal band saw with drive via worm gear and wide v-belt variator with 1.5 <br/>kw motor, mechanical belt tension, manual liftingof the saw after cutting, <br/>hydr. support cylinder, regulating valve for stopping or changing the feed, <br/>vise jaws for 45 ° miter.<br/>machine dealer with own stock of 2500 m² and certification of the database<br/>machineseeker.<br/><br/><br/><br/><br/> CUTTING DIAMETER: 260 MM
SAW BAND LENGTH: 3700 MM
CUTTING WIDTH: 400 MM
CUTTING SPEED: 20 - 180 M/MIN
CUTTING RANGE RECTANGLE: 400 X 155 / 300 X 220 MM
CAPACITY 90 DEGREES: SQUARE: 250 X 250 MM
CAPACITY 45 DEGREES: ROUND: 170 MM
CAPACY 45°: RECTANGLE: 160 X 145 / 120 X 240 MM
WORK HEIGHT MAX.: 710 MM
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT OF THE MACHINE CA.: 390 KG
DIMENSIONS OF THE MACHINE CA.: 1,8 X 0,65 M
ELECTRIC 380 VOLT:
COOLING EQUIPMENT:
MATERIAL SUPPORT:
POSITIONING ROD:
HORIZONTAL BAND SAW WITH DRIVE VIA WORM GEAR AND WIDE V-BELT VARIATOR WITH 1.5
KW MOTOR, MECHANICAL BELT TENSION, MANUAL LIFTINGOF THE SAW AFTER CUTTING,
HYDR. SUPPORT CYLINDER, REGULATING VALVE FOR STOPPING OR CHANGING THE FEED,
VISE JAWS FOR 45 ° MITER.
MACHINE DEALER WITH OWN STOCK OF 2500 M² AND CERTIFICATION OF THE DATABASE
MACHINESEEKER.




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 300 mm<br/>turning length: 700 mm<br/>control: fanuc 10 t <br/>3-jaw chuck: kitakawa <br/>type: b - 208 <br/>tail stock:  <br/>chip conveyor:  <br/><br/><br/><br/><br/> TURNING DIAMETER: 300 MM
TURNING LENGTH: 700 MM
CONTROL: FANUC 10 T
3-JAW CHUCK: KITAKAWA
TYPE: B - 208
TAIL STOCK:
CHIP CONVEYOR:




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-table length: 710 mm<br/>table width: 710 mm<br/>table height: 700 mm<br/>swivel movement: 90 grad<br/>total power requirement:   kw<br/>weight of the machine ca.: 0,56 t<br/>dimensions of the machine ca.:   m<br/>? adjustable bore cube,<br/>(at one edge there is a breakage at the t-slot)<br/><br/><br/><br/> TABLE LENGTH: 710 MM
TABLE WIDTH: 710 MM
TABLE HEIGHT: 700 MM
SWIVEL MOVEMENT: 90 GRAD
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,56 T
DIMENSIONS OF THE MACHINE CA.: M
? ADJUSTABLE BORE CUBE,
(AT ONE EDGE THERE IS A BREAKAGE AT THE T-SLOT)



Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Ubicación: Land-pressure:100 t<br/>chamfer lenght:2600 mm<br/>distance between columns:2200 mm<br/>column arm:410 mm<br/>ram stroke speed:200 mm/sec<br/>return speed:155 mm/sec<br/>working speed:9,5 mm/sec<br/>work stroke:275 mm<br/>oil volume:150 l<br/>dayligth:530 mm<br/>table height:900 mm<br/>table width:90 mm<br/>total power requirement:7,5 kw<br/>weight of the machine ca.:7000 kg<br/>dimensions of the machine ca.:3750 x 1950 x 2800 mm<br/><br/>1 brand new, hydraulic ermak power-bend falcon 26.100 cnc press brake, directly from the factory, with following equipment: - motorized back gauge with r-axis  x = 800 mm  r = 250 mm (+2 stop fingers on ball screws) - 2 front support arms (with t-slot and cam) - controlled axis y1-y2-x-r- c-crowning system - elektr. crowning system controlled with cnc - top tool with quick-clamping system - 4v universal die-block - bosch/hoerbiger hydraulic system - siemens electronic - sick light barrier - fissler akas laser-light barrier - swivable control panel - double foot switch - ce mark / conformity declaration - operation manual PRESSURE:100 T
CHAMFER LENGHT:2600 MM
DISTANCE BETWEEN COLUMNS:2200 MM
COLUMN ARM:410 MM
RAM STROKE SPEED:200 MM/SEC
RETURN SPEED:155 MM/SEC
WORKING SPEED:9,5 MM/SEC
WORK STROKE:275 MM
OIL VOLUME:150 L
DAYLIGTH:530 MM
TABLE HEIGHT:900 MM
TABLE WIDTH:90 MM
TOTAL POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:7000 KG
DIMENSIONS OF THE MACHINE CA.:3750 X 1950 X 2800 MM

1 BRAND NEW, HYDRAULIC ERMAK POWER-BEND FALCON 26.100 CNC PRESS BRAKE, DIRECTLY FROM THE FACTORY, WITH FOLLOWING EQUIPMENT: - MOTORIZED BACK GAUGE WITH R-AXIS X = 800 MM R = 250 MM (+2 STOP FINGERS ON BALL SCREWS) - 2 FRONT SUPPORT ARMS (WITH T-SLOT AND CAM) - CONTROLLED AXIS Y1-Y2-X-R- C-CROWNING SYSTEM - ELEKTR. CROWNING SYSTEM CONTROLLED WITH CNC - TOP TOOL WITH QUICK-CLAMPING SYSTEM - 4V UNIVERSAL DIE-BLOCK - BOSCH/HOERBIGER HYDRAULIC SYSTEM - SIEMENS ELECTRONIC - SICK LIGHT BARRIER - FISSLER AKAS LASER-LIGHT BARRIER - SWIVABLE CONTROL PANEL - DOUBLE FOOT SWITCH - CE MARK / CONFORMITY DECLARATION - OPERATION MANUAL
Vendedor: SALING Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more M types: