aka todas las categorias

Ubicación: FORMAT-SEEDING DISTRICT SAW MANUFACTURER: COMPANY MAKA TYPE: KS 3000 OF THE YEAR 1994 380 V KW 5,5 THE MACHINE WORKS AND IS CAPABLE OF DEMONSTRATION, BUT THE DEGREE NUMBER DISPLAY OF THE SAW BLADE IS BROKEN. THE ORIGINAL MANUAL IS AVAILABLE. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)

Ubicación: X-TRAVEL:1000 MM
Y-TRAVEL:530 MM
Z-TRAVEL:510 MM
CONTROL:MAZATROL MATRIX NEXUS 2
RAPID TRAVERSE X-AXIS:42 M/MIN
RAPID MOTION - Y-AXIS:42 M/MIN
RAPID TRAVERSE Z-AXIS:42 M/MIN
TABLE SURFACE AREA:1300 X 550 MM
TOOL TAPER:BT 40
NUMBER OF TOOLHOLDER-HOLES:30
TURNING SPEED RANGE:12000 1/MIN
TOTAL POWER REQUIREMENT:42 KVA
WEIGHT OF THE MACHINE CA.:6,8 T
DIMENSIONS OF THE MACHINE CA.:3 X 3 X 2,7 M
CHIP CONVEYOR:
INTERNAL COOLANT SYSTEM FEED:
TOOL BREAKAGE AND LENGTH MEASURING SYSTEM:
4TH AXIS ROTARY TABLE 200 MM:

THIS IS A WELL MAINTAINED VERY SOLID VERTICAL MACHINING CENTER

Ubicación: 14'588 SPINDLE HOURS (COUNTER CABINET) APPROX. 4'000 HOURS OF PROGRAM COURSE (NC-A PANEL) VINTAGE: 04.2007 / COMMISSIONING: 05.2008 CONTROL: MATSUURA G-TECH - 32I (FANUC) TRAVERSE PATH X / Y / Z: 520 / 730 / 510 MM SPINDLE SPEED: 45 15'000 RPM TOOLHOLDER: BT 40 TOOL CHANGERS: 120 SEATS MACHINE DIMENSIONS W X D X H: CA. 4300 X 7000 X 3100 MM (FOOTPRINT) WEIGHT: CA. 15'000 KG TABLE: -PALLET SIZE: 300 X 300 MM -MAXIMUM LOAD: 200 KG -MAXIMUM WORKPIECE SIZE Ã? X H 520 MM X 350 MM TOOL: -MAXIMUM DIAMETER: Ã?96 MM / Ã?150 MM -MAXIMUM LENGTH: 300 MM -MAXIMUM WEIGHT: 10 KG -TOOL CHANGE TIME: 1.1 SEC PROCESS AREAS: A-AXIS: + 110° ~ - 110° B-AXIS: 360° FEEDS: X-AXIS: 50 / 50 M / MIN Y-AXIS: 50 / 50 M / MIN Z-AXIS: 50 / 50 M / MIN A-AXIS: 30 MIN-1 C-AXIS: 50 MIN-1 SPECIAL ACCESSORIES OF THE MACHINE: EXTENSION OF THE TOOL MAGAZINE OF STANDARD 30 TO 120 TOOL LOCATIONS, INCLUDING PREPARATION FOR 240 TOOL PLACES PALLET CHANGER WITH 2 PALLETS HSC SPINDLE OF 40 - 15'000 RPM WITH BIG-PLUS RECORDING, MOTOR: 18,5 KW, MAX TORQUE: 108 NM / 1320 MIN-1 DIRECT MEASURING SYSTEM (HEIDENHAIN) FOR X, Y, AND Z AXES KNOLL HIGH PERFORMANCE RADIATOR: -SCRAPER CONVEYOR OR SCHANIERBANDSPäNEFöRDERER LIFTING PUMP WITH CHIP REMOVAL TO THE OPERATING SIDE -COOLANT THROUGH THE SPINDLE WITH COOLANT PUMP KTS25-50 TONS AND 17 L/MIN AT 70 BAR, 5.5 KW, COOLANT PRESSURE IN 3 STEPS SELECTABLE -EXTERNAL COOLING WITH COOLANT PUMP, CAPACITY 100 L/MIN AT 1.4 BAR -COOLANT SHOWER WITH COOLANT PUMP, CAPACITY 270 L/MIN AT 2.3 BAR -HYDROSTATFILTE HL-450, FILTER CAPACITY 450 L/MIN, DIMENSION OF THE TOTAL UNIT L X W X H APPROX. 2.4 X 1.7 X 2.3 M, TANK CAPACITY APPROX. 1,100 LITRES MEASURING PROBE RENISHAW OMP 60 FOR THE AUTOMATIC ZERO SETTING AND MEASURING OF WORKPIECES, THE TOOL CHANGER IN THE INTERCHANGEABLE SPINDLE. INCLUDING EASY TRIAL SOFTWARE, PRESSURE GAUGE FOR TOOL LENGTH MEASUREMENT AND TOOL BREAKAGE DETECTION 8 FREE M FUNCTIONS ROTATING VIEWING WINDOW OPTIONAL ACCESSORIES FOR THE CONTROL: CUTTING FORCE MONITORING BOOST THE WORKPIECE COORDINATE SYSTEM FROM 6 TO 54 CORNER CHAMFER AND ROUND AUTOMATIC ZERO POINT CARRYING EXPANSION OF THE MACRO VARIABLES ON 100-199, 500-999 IZ2/150NF HSC PRECISION CONTROL FOR SIMULTANEOUS 5-AXIS MACHINING, CONSISTING OF: -FAST DATA SERVER FUNCTION HIGH SPEED PRECISION CONTOUR CONTROL -NANO SMOOTHING -DYNAMIC ZERO CARRYING, THERE ARE UP TO 8 DIFFERENT ZERO POINTS TO CARRY AVAILABLE -TCPC TOOL CENTER CONTROL FOR 5-AXIS SIMULTANEOUS MILLING -SWING CYCLE ALLOWS YOU TO EDIT ON AN INCLINED WORKING PLANE ERRORS OF TECHNICAL DATA AND INTERMEDIATE SALES RESERVED!

Ubicación: X-TRAVEL:762 MM
Y-TRAVEL:508 MM
Z-TRAVEL:508 MM
CONTROL:HAAS
TURNING SPEEDS:12000 1/MIN
SPINDLE DRIVE:22,4 KW
TORQUE OF MILLING SPINDLE:122 NM
FEED X/Y/Z:16,5 M/MIN
RAPID TRAVEL X/Y/Z:30,5 M/MIN
:+110.000 -35.000 X 0,001 °
C-AXIS:360.000 X 0,001 °
DISTANCE SPINDLE NOSE AND TABLE:102 - 610 MM
TABLE DIMENSIONS:630 X 500 MM
WORKPIECE WEIGHT:300 KG
SPEED OF TURNING TABLE:8,3 1/MIN
TOOL MAGAZIN::40+1 DIN (SK 40)
MAX. TOOL DIAMETER:76 MM
MAX. TOOL-DIA WITH FREE TOOLBOX:127 MM
MAX. TOOL WEIGHT:5,4 KG
TOTAL POWER REQUIREMENT:53,3 KW
WEIGHT OF THE MACHINE CA.:12,5 T
DIMENSIONS OF THE MACHINE CA.:4115 X 2870 X 2950 M
SLAT-BAND CHAIN CONVEYOR:
USB 2.0 INTERFACE:
MEMORY:750 MB
INTERNAL COOLANT SYSTEM FEED:21 BAR FILTER
PROBE FOR TOOL BREAKAGE AND LENGTH MEASURING:WIPS
AIR BLOW SYSTEM EXTERNAL:
LOOK AHEAD FUNCTION:

FULL 5 AXIS UNIVERSAL MACHINING CENTER WITH TURNING AND SWIVELLING TABLE AND VERTICAL SPINDLE. COOLANT THROUGH SPINDLE 70 BAR

Ubicación: CNC GANTRY TYPE PORTAL MILLING MACHINE WORKSPACE: X AXIS 7000 MM Y AXIS 3000 MM Z AXIS 1500 MM A-AXIS +/-100° C-AXIS +/-360° TABLE: L X W X H 8680 X 3000 X 350 MM TABLE LOAD 30,000 KG/M² MILLING HEAD VH 6 SPINDLE POWER 41 KW SPINDLE SPEED 10,000 RPM TOOL HOLDER HSK 100A FEED RATES X AND Y AXIS 30 M/MIN Z AXIS 20 M / MIN CONTROL HEIDENHAIN ITNC 530 TOOL CHANGER 120 (CHAIN) 2 CHIP CONVEYOR LASER TOOL MEASUREMENT AND BREAKAGE DETECTION MEASURING PROBE RENISHAW RMP 60

Ubicación: FILTER /ROTARY PUMP (1X), MAKE ROMICON (FILTER), TYPE CTG 3 HF (HOLLOW FIBER) 21-75 PM-500, NEW UNKNOWN, MATERIAL STAINLESS STEEL, MOUNTED ON WHEELS, FLOOR SPACE 1,1X0,7 M, TOTAL HEIGHT 2,1 M, WEIGHT 200 KG, EXTRA SPECIFICATIONS - SANITARY ROTARY PUMP MAKE NAKAMURA JAPAN, TYPE 25 VT-D SIZE 1,5 MOTOR 0,75 KW, 220/380 VOLT, WITH FREQUENCY INVERTERMISCELLANEOUS FILTERSMISCELLANEOUS > MISCELLANEOUS FILTERS

Ubicación: TYPE MCH 280 HELLER, HORIZONTAL BUILT IN 2003 COMMISSIONING 2004 CONTROL SIEMENS 840 D X 1,000 MM Y-AXIS 800 MM Z-AXIS 800 MM TOOL CHANGER 50, HSK100 ROUND TABLE 360 X 0.001 PALLET SIZE 2 PIECE 500 X 630 MM HYDRAULIC WORKPIECE CLAMPING WORKROOM FLUSHING YES YES COOLING PLANT COMPANY KNOLL, VRF250 CHIP CONVEYOR YES SPINDLE SPEED 45-6,000 1/MIN RAPID TRAVERSE 50 M / MIN RAPID TRAVERSE B AXIS 25 RPM MAXIMUM WORKPIECE SIZE 1,290 X 1,000 MM SPACE REQUIREMENT 6.3 X 6.9 X 3.8 M PRICE VB Â?¬105.000,--/ FROM SITE DELIVERY TIME NOW SITE 88525 DüRMENTINGEN ACCESSORIES: PNEUMATIC PAD CONTROL, PERFORMANCE MONITOR (IPM), REPLACEMENT TOOL STRATEGY, DRILL BIT BREAKAGE DETECTION (SBBK), REMOTE DIAGNOSIS MODEM

Ubicación: ROTARY VALVE (1X), MAKE WAESCHLE, TYPE AKA 250.3/8 AC, NO 42243/04, NEW 1991, HOUSE MATERIAL ALUMINIUM, ROTOR MATERIAL ALUMINIUM, ROTOR DIAMETER 250MM, ROTOR WIDTH 180MM, INLET 210X180MM, INLET FLANGE SIZES 320X270MM, DAYLIGHT 400MM, WITH MOTOR 0,37 KW, 220/380 VOLT, OUTER LAYING BEARINGS, FLOORSPACE 0,6X0,6 M, TOTAL HEIGHT 0,4 M, WEIGHT 110 KGROTATING VALVESROTARY VALVES > ROTATING VALVES

Ubicación: CNC CONTROL FANUC SERIES 150-M SPINDLE CENTER DISTANCE - PALLET PLANE: 70-820 MM CONE TYPE: ISO 40 (MAS 403) SPEED SPINDLE: 200-18000 RPM POWER SPINDLE: (CONT./30 MIN.) 18.5 KW X AXIS 850 MM Y AXIS 750 MM Z AXIS 700 MM RAPID FEED: X/Y/Z 24/24/24 M/MIN TABLE DIMENSIONS: 630X630 MM WEIGHT PERMITTED: 1200 KG TOOL MAGAZINE: 120 POS DIMENSIONS OF TOOLS: 100/440 MM MAX. WEIGHT OF TOOLS: 12 KG NUMBERS OF PALLET: 2 INDEXING PALLET: 1º WEIGHT: 20.500 KG CHIP CONVEYOR REMOTE ELECTRONIC HANDWHELL TOOL PRESETING COOLING AREA OF THE WORKING AREA SEPARATOR OIL FROM THE INTEGRATED REFRIGERANT IN THE BATHTUB SENSORS FOR CHECKING THE REFRIGERANT FLOW. REFRIGARTION SYSTEM HIGH PRESSURE TOOLS 35 BAR HAS-1 FUNCTION (HIGH SPEED). CONTROL OF SPARE TOOLS. TOOL CONFIRMATION SYSTEM. MARPOSS PROBE MOUNTED ON THE TABLE FOR AUTOMATIC SURVEYING. COMPENSATION LENGHT AND RADIUS TOOLS AND TOOL BREAKAGE CONTROL. TOOL LIFE MANAGEMENT. ADADAPTIVE CONTROL OF CUTTING EFFORTS. MEMORY EXTENSION AT 640METERS OF HELICOIDAL INTERPOLATION TAPE. PROGRAMMABLE MIRROR IMAGE. RESTART PROGRAM. FANUC DATA SERVER RIGID SYNCHRONIZED TAPPING. THERMAL STABILIZATION OF THE STRUCTURE.

Ubicación: CUTTING DIAMETER: 260 MM
SAW BAND LENGTH: 3700 MM
CUTTING WIDTH: 400 MM
CUTTING SPEED: 20 - 180 M/MIN
CUTTING RANGE RECTANGLE: 400 X 155 / 300 X 220 MM
CAPACITY 90 DEGREES: SQUARE: 250 X 250 MM
CAPACITY 45 DEGREES: ROUND: 170 MM
CAPACY 45°: RECTANGLE: 160 X 145 / 120 X 240 MM
WORK HEIGHT MAX.: 710 MM
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT OF THE MACHINE CA.: 390 KG
DIMENSIONS OF THE MACHINE CA.: 1,8 X 0,65 M
ELECTRIC 380 VOLT:
COOLING EQUIPMENT:
MATERIAL SUPPORT:
POSITIONING ROD:
HORIZONTAL BAND SAW WITH DRIVE VIA WORM GEAR AND WIDE V-BELT VARIATOR WITH 1.5
KW MOTOR, MECHANICAL BELT TENSION, MANUAL LIFTINGOF THE SAW AFTER CUTTING,
HYDR. SUPPORT CYLINDER, REGULATING VALVE FOR STOPPING OR CHANGING THE FEED,
VISE JAWS FOR 45 ° MITER.
MACHINE DEALER WITH OWN STOCK OF 2500 M² AND CERTIFICATION OF THE DATABASE
MACHINESEEKER.

Ubicación: FORMING ROLL FOR ELEVATOR GUIDE RAIL USAGE:COLD FORMING FOR ELEVATOR GUIDE RAIL QUANTITY:2LINES MAKE:NAKATA(JAPAN) MANUFACTURING YEAR:1982 THE NUMBER OF STAND: 10 PRODUCT SIZE: 4.5MM X 300MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567

Ubicación: WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 2000 X 1700 MM
DESCRIPTION: SAW BLADE LENGTH 3580 TO 3700 MM, SAW BLADE WIDTH MAX. 25 MM, WITH FEED, ROLLER CONVEYOR, LENGTH STOP, MATERIAL WIDTH MAX. 400 MM

Ubicación: PROCEDURES X 800 MM Y-AXIS 800 MM Z-AXIS 800 MM B-AXIS 360,000 X 0.001 ° ---------------------------------------------------------- PALLET NUMBER 2 PALETTNGRöÃ?E 630 X 630 MM MAXIMUM WORK-PIECE WEIGHT OF 800 KG ----------------------------------------------------------- SPEED 60 M / MIN SPEED RANGE (SPINDLE) 45 12,500 1/MIN SPINDLE DRIVE POWER BEO 40% ED 72 KW/460 NM ----------------------------------------------------------- TOOL MAGAZINE (CHAIN) 50 TOOL PLACES TOOL HOLDER HSK 100 MAXIMUM TOOL LENGTH 600 MM MAX TOOL DIAMETER 112/ 228 MM MAXIMUM TOOL WEIGHT 25 KG ----------------------------------------------------------- MACHINE WEIGHT APPROX. 19,000 KG TOTAL POWER DEMAND 79 KVA CNC CONTROL SIEMENS 840 D FACILITIES: -HYDRAULIC WORKPIECE CLAMPING / 5 X MEDIA INTERFACE. -TOOL BREAKAGE DETECTION -INTERNAL COOLANT SUPPLY 70 BAR -NC RUNOUT TABLE -ADVANCED COOLING PLANT WITH VACUUM ROTATION FILTER -WORKING SPACE IRRIGATION -PANEL ON THE WERKZEUGEINLEGEPLATZ -MULTIPLE SPINDLE HEAD RETAINER HSK 100 -CONVEYORS

Ubicación: SHEET WIDTH: 2080 MM
PLATE THICKNESS: 15 / 12 MM
DISTANCE BETWEEN COLUMNS: 2300 MM
THROAT: 500 MM
CUTTING GAP ADJUSTMENT: MM
TRUE CUTTING ANGLE ADJUSTABLE:
REAR STOP:
TOTAL POWER REQUIREMENT: 30 KW
WEIGHT OF THE MACHINE CA.: 11,5 T
DIMENSIONS OF THE MACHINE CA.: 2900 X 2150 X 2900 M
PLATE THICKNESS MAXIMUM PERFORMANCE: 15 MM
PLATE THICKNESS CONTINUOUS PERFORMANCE: 12 MM
THE MACHINE IS IN A GOOD OPTICAL CONDITION AND HAS FUNCTIONED WELL UNTIL DISMANTELING.
HOWEVER,THERE ARE LEAKAGES ON THE CYLINDERS, THE LOW HOLDERS AND ON SOME SCREWS. MOREOVER, SOME LOW HOLDERS AND 3 LOW HOLDER?S PLATES ARE MISSING, BUT WITH SOME TALENT YOU PROBABLY CAN PRODUCE THEM BY YOURSELF.

Ubicación: OVERVIEW BRAND: PLASMACAM MODEL: SAMSON 510 APPLICATION TYPE: PLASMA CUTTING MACHINE TYPE: PLASMA CUTTING MACHINE AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2013 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: UNITED STATES PRODUCTION HOURS: 450 GENERAL DATA MEASUREMENTS WIDTH: 3000 MM MEASUREMENTS DEPTH: 1500 MM MEASUREMENTS HEIGHT: 1100 MM MACHINE WEIGHT: 2100 KG MAIN DRIVE LASER POWER: 30 KW PLASMA BRAND: HYPERTHERM POWERMAX 105 MOVEMENT X-AXIS MOVEMENT: 3000 MM Y-AXIS MOVEMENT: 1500 MM MAX MATERIAL THICKNESS STEEL: 25 MM STAINLESS STEEL: 25 MM ALUMINIUM: 30 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V ADDITIONAL EQUIPMENT 1: 1X HYPERTHERM POWERMAX 105 2: 1X AIRFILTER 3: 1X PC CONTROL SYSTEM TOWER SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2RAKAX0

Ubicación: X-TRAVEL:630 MM
Y-TRAVEL:630 MM
Z-TRAVEL:710 MM
ZERO-POINT POSITIONING X / Z -AXIS:150 / 70 MM
FEED STEPLESS X-Y-Z:MAX. 120 MM/MIN.
RAPID TRAVERSE X,Y,Z;B:120 / 120 / 120 / 100 M/MIN.
B-AXIS (TABLE):500 X 500 (PALETTE ) MM
POSITIONING ACCURACY:8 ARC S
SOLUTION IN B-AXIS:360000X0.001 °
MAX. DISTANCE OVER ROTARY TABLE:850 ( STöRKREIS780 MM ) MM
KIND OF DRIVE ( B-AXIS ):SYNCHRON
MAX. TABLE LOAD:400 KG
DRIVE MOTOR:INDRAMAT
HF - SPINDLE TYP:774132-175227 MAKE:WEISS
SPINDLE DRIVE MOTOR:40 ( 100 % ) 53 ( 40%) KW
SPINDLE DIAMETER:70 MM
SPINDLE SPEED:27,4 NM / 56,1 NM:16000 / 8500 1/MIN.
TOOL TAPER:HSK 63 - E & A DIN 69893
NO. OF TOOLS IN MAGAZIN ( DISC MAGAZIN ):40 NOS.
TOOL PIECE MAGAZINE SPEED ( V & W-AXIS ):4000 ( 17,5 NM)/ 4500 (8 NM) 1/MIN.
TOOL LENGTH - MAX.:300 MM
WORKPIECE DIAMETER AT FULL LOAD:70 MM
WOTKPIECE DIAMETER WITH 2 VACANT POSITIONS:125 MM
WEIGHT OF TOOLS MAX.:10 KG
MAX. TOOL WEIGHT TOTAL ATC:160 KG
SWITCHING TIME / MAGAZIN PLACE:0,3 SEC
TOTAL POWER REQUIREMENT:90 KVA
WEIGHT OF THE MACHINE CA.:13 T
ELECTRICS - VOLTAGE/FREQUENCY:400 / 3 PH / 50 V/HZ
DIMENSIONS OF THE MACHINE APPROX. 6,0 X1,8 X 3,9 M: MMXMMXMM

5 NOS. OF HF - HORIZONTAL MACHINING CENTERS 5 AXIS EX-CELL- O , TYPE XHC 241 , BJ . 2001,2001,2002,2003,2009 WITH CNC CONTROL INDRAMAT MTC 200, IN GOOD CONDITION, PART OF OUR FMS LINE, CURENTLY SET TO MACHINE TORQUE CONVERTER HOUSING, OEM PRODUCTION, IN GOOD CONDITION. THE PRICE INCLUDES 5 NOS. OF EX-CELL-O XHC 241 HMC EITHER THIS TYPE WITH B-AXIS & A-AXIS OR OTHER MODEL OUR STOCK NO 6444 B-AXIS WITH PALLETCHANGER. MORE DETAILS: A- AXIS , ATC DISCMAGZIN 40 TOOLS, TOOL BREAKAGE MONITORING, TOP LOADING DEVICE.

Ubicación: TECHNICAL DATA: BRAND: MARUNAKA TYPE: ROYAL FX 0 °-40 ° WORKING WIDTH: 250 MM CLEARANCE HEIGHT: 1 180 MM TABLE SETTING: (AT 60 °): 165 MM TABLE ADJUSTMENT 0-60 °, DEPENDING ON THE TYPE OF WOOD TABLE SETTING (250°): 300 MM TABLE SETTING (IN 25° OPPOSITE): (2 X 300 MM) 600 MM FEED SPEED: 50 M / MIN.

Ubicación: WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 800 X 500 MM
DESCRIPTION: SUITABLE WITH X10 AND X100. COMPREHENSIVE OF VALVES UNIT. SEE PHOTO

Ubicación: GENERAL PROJECT NO.: 904687 NUMBER: 1 PCS. MANUFACTURER: SW TYPE: BA W04-22 CONTROL: SIEMENS 840 D YEAR OF MANUFACTURE: 2007 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 400 MM TRAVEL IN Y (775) 500 MM TRAVEL IN Z 425 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 14/14/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 Ã? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE/N SPINDLE DISTANCE 400 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 Ã? 32 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 10 KG EXCITING TO CHIP TIME 2.75 S ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET 450 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 8 PCS. (2 X 4 PCS.) NC-CONTROLLED ROTARY TABLE BRIDGE SIZE 1030 MM DIAMETER OF WORKPIECE RANGE 550 MM 2 SET CLAMPING BRIDGE CONDITIONS HYDRAULIC CLAMPING 2 ADDITIONAL / -R CLAMPING CIRCUIT (S) MORE FACILITIES PREPARATION FOR IR WORKPIECE MEASURING PROBE RENISHAW RMP-60 TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA PREPARATION FOR CENTRAL OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR CONNECTION 6 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE LXWXH) APPROX. 3680 X 5100 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4350 X 7000 X 3100 MM MACHINE WEIGHT 14500 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.

Ubicación: WEIGHT APPROX.: 5 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 300 X 200 MM
DESCRIPTION: FOR TAKAMAZ. SEE PHOTO

Ubicación: CLEANING PLANER MARUNAKA TEKKOSHO ROYAL-10 TECHNICAL DATA MASCH. NO. 710697 TENSION DECREASE BELOW MAX WIDTH 250 MM (40 ° C), 165 MM (60 °) 330 MM (0 °) X 2 = 660 MM MAX HEIGHT 180 MM / 300 MM BLADE TILT 0-60 ° VARIABLE VORSCHUBGESCHWINDIKEIT 54 M / MIN. TABLE HEIGHT 650 MM TABLE SIZE 1100 X 345 MM BLADES 335 X 66 X 8 MM CHIP BREAKER 335 X 66 X 8 MM FEED MOTOR HP/KW/V 2.2/380/3 PHASE MOTOR HEIGHT ADJUSTMENT 0.1 KW EXTERNAL DIMENSIONS (L X W X H) 1272 X 830 X 930 ~ 1140 MM WEIGHT 430 KG BUILT IN 1971 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12

Ubicación: WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 800 X 1700 MM
DESCRIPTION: SERIAL NUMBER 270093. SEE PHOTO

Ubicación: GO: 2018 SPINDLE BEARINGS WERE REPLACED IN JUNE 2018 MOTOR IS A REPLACEMENT MOTOR WITH SERVO AMPLIFIER 7.5 KW WITH HYDRAULIC TURRET WITH 8 POSITIONS CONTROL SYSTEM: FAGOR 8055IFCL-TC TURNING OVER BED: 530 MM TURNING OVER CROSS SLIDE: 265 MM TURNING LENGTH: 1520 MM (Z-AXIS 1415 MM) SPINDLE BORE: 80 MM CHUCK: 10 INCHES - MANUALLY SPINDLE SPEED: MAX. 2000 RPM SPINDLE POWER: 11 KW (FAGOR ENGINE) ACCESSORIES: FIXED STEADY RESTS MOVABLE STEADY RESTS ADAPTER FOR REAR CHUCK + 4 JAWS 12 INCHES TOOL HOLDER SPINDLE COOLING (TNC 530) TRANSMISSION: 4 ST.CNC SORTING CONE MT5 AVAILABILITY: 01.01.2019

Ubicación: MANUFACTURER: MAKA, TYPE: STV 71, YEAR: CA. 1980, CONTROL: HAND, WORK STATIONS: 1, HORIZONTAL MOULDING UNIT: 1, MOTOR KW: 3, CLAMPING HIGHT MAX. MM: 120, TRENCH DEEPTH MAX MM: 130, LIFTING DEVICE: YES, YEAR :CA. 1980

Ubicación: CNC LATHE NAKAMURA TMC-12 + GANTRY LOADER GR-103 YEAR OF CONSTRUCTION 1998, S / NO. R04101 FANUC 21-TA CONTROL MAXIMUM TURNING DIAMETER 180 MM MAX SWING DIAMETER ABOVE BED 300 MM MAXIMUM TURNING LENGTH 200 MM MAX BAR PASSAGE 42 MM TRAVERSE PATHS X/Z 120 MM / 220 MM 8 TOOL TURRET RS-232-C INTERFACE GANTRY LOADER GR-103 (MON-BEI) -MAXIMUM WORKING WEIGHT 6 KG (2 X 3 KG) -MAXIMUM DIAMETER X LENGTH 130 MM X 90 MM -LOADING - UNLOADING TIME 7,5 SECONDS MEMORY OF PART OF (HAKO AT), PALLET SYSTEM COLLET CHUCK INCLUDING VARIOUS TOOL HOLDER CHIP CONVEYOR CE MARK

Ubicación: WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 1540 X 1000 X 1400 MM
DESCRIPTION: HIGH QUALITY CENTER LATHE FOR TRAINING (SAME AS HARRISON) DIGITAL DISPLAY MULTIFIX TOOLHOLDER ONE-HAND LEVER OPERATION FOR THE FEED SYSTEM UNBREAKABLE, SOLID AND ROTATABLY MOUNTED FORAGE PROTECTION GEARS HARDENED AND GROUND FOR QUIET RUNNING ADJUSTABLE GUIDES ADJUSTABLE MAIN SPINDLE BEARINGS FOLDABLE CHIP PAN FOR EASY CLEANING OF THE MACHINE COOLANT SYSTEM SPLASH GUARD TURNING DIAMETER OVER BED 330 MM TURNING DIAMETER OVER SUPPORT 210 MM TURNING LENGTH 635 MM TURNING DIAMETER IN THE CRANK 480 MM SPEED 58 - 2500 RPM CENTER HEIGHT 167 MM SPINDLE BORE 40 MM TAILSTOCK SLEEVE MOUNT MK 3 MK TOTAL POWER REQUIREMENT 2,2 KW MACHINE WEIGHT APPROX. 0.8 T SPACE REQUIRED APPROX. 1.54 X 1.0 X 1.4 M

Ubicación: MACHINE TYPE: OKUMA MF 46VA CONTROL: OSP P - 200 M YEAR: 2006 SPINDLE ROTATION: 17540 H TECHNICAL DATA: TRAVEL: X-AXIS: [MM] 762 Y-AXIS: [MM] 560 Z-AXIS: [MM] 460 RAPID TRAVERSE: (X/Y/Z) [M/MIN] 40 / 40 / 32 TABLE SIZE: [MM] 2 X 460 X 760 SPEED RANGE: 0-8,000 [1/MIN] TOOL LOCATIONS: [PCS] 20 TOOLHOLDER: BT 40 MORE FEATURES - CHIP CONVEYORS MAYFRAN - INTERNAL COOLANT THROUGH THE SPINDLE (ECC) WITH HIGH PRESSURE ERROR 15 BAR - TOOL BREAKAGE MONITORING - DNC DT - CONNECTOR FOR CONNECTION OF DUST EXTRACTION SYSTEM - HAND SHOWER FOR WORKPIECE CLEANING, PRINTING ERRORS, CHANGES, AND Z WIPE SALES RESERVED

Ubicación: WEIGHT APPROX.: 20500 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 2000 X 3000 MM
DESCRIPTION: PRESS BRAKE, CAPACITY: 5200 X 150 T, DELEM CNC CONTROLLER, CNC BOMBERING, HYDRAULIC FLATTENING TOOL, AKAS FIESSLER LASER SAFETY SYSTEM

Ubicación: MANY THANKS FOR YOUR INTEREST ON OUR SECOND HAND MACHINES, PLEASE FIND FOLLOW OUR OFFER: MANUFACTURER: MAKAT MOGULANLAGE / MOGUL PLANT TYPE: HLM 35 RS JUMBO YEAR; 2006 SIZE: 1218X440, STARCH DEPTH 30MM OUTPUT: UP TO 30 TRAYS/MIN. / 2.5 TO/H DIFFERENT: VERY GOOD CONDITION 1 DEPOSITOR FOR GUM 6 COLUORS UNDISMANTLED, AVAILABLE FEB 2019 WITHOUT STARCH DRYER I OFFER THIS MACHINE IN AS-IS WHERE IT IS CONDITION, BUT THE LINE IS IN ABSOLUTELY TOP CONDITION EX WORK, UNPACKED, WITHOUT DISMANTLING

Ubicación: WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 3300 X 1700 X 1600 MM
DESCRIPTION: - CUTTING LENGTH: 3200 MM WITH SLIDING CARRIAGE
- CUTTING WIDTH: 1200 MM
- TROLLEY LENGTH: 1800 MM
- CUTTING HEIGHT WITH SAW BLADE DIAMETER 400 MM: 135 MM
- CUTTING HEIGHT WITH INCLINABLE SAW BLADE DIAMETER 400 MM AT 45°: 90 MM
- SPEED OF SAW SHAFTS: 3000, 4000 AND 6000 RPM
- MOTOR POWER: 4 KW
- HEIGHT ADJUSTABLE

Ubicación: WITH PALLET STORAGE RS4 PROCEDURES X AXIS 630 MM Y-AXIS 800 MM Z-AXIS 680 MM B-AXIS 360,000 X 0.001 ° ---------------------------------------------------------------------- PALLET STORAGE 4 PALLETS NUMBER OF PALLETS IN THE SYSTEM 6 PALLETS PALLET SIZE 500 X 500 MM ----------------------------------------------------------------------- TOOL MAGAZINE CAPACITY OF 180 TOOL TOOL HOLDER HSK 63 ----------------------------------------------------------------------- SPINDLE SPEED (MOTOR) 18,000 1/MIN DRIVE POWER (100% / 40% ED) 25 / 35 KW ----------------------------------------------------------------------- FACILITIES: -CNC CONTROL SIEMENS 840 D POWERLINE -HYDRAULIC TENSIONING DEVICE -INFRARED TOUCH PROBE -TOOL BREAKAGE CONTROL LASER -COOLANT TEMPERATURE CONTROL FOR INTERNAL COOLANT COOLANT SYSTEM -INTERNAL COOLANT 40 BAR -ROTATING VIEWING WINDOW -CONVEYORS -MODE 4 "PROCESS MONITORING IN PRODUCTION"

Ubicación: WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 900 X 1600 MM
DESCRIPTION: MAKA SM7-P MORTISING MACHINE

Ubicación: LADIES AND GENTLEMEN, HEREBY WE OFFER YOU NON-BINDING AS FOLLOWS: A FULL-FEATURED CNC VERTICAL MACHINING CENTER MATEC 30 L BUILT IN 2000 CONTROL BOSCH TYPE 3OSA WITH CHIP CONVEYOR WITH INTEGRATED COOLANT SYSTEM BRUSHING DEVICE FOR CHIP CONVEYOR WITH ROTATING BRUSH DRILL BIT BREAKAGE DETECTION FROM RENISHAW SK40 SHOTS (APPROX. 30 PCS) AVAILABLE FROM 12.11.2018, FREE HOUSE FEDERAL REPUBLIC OF GERMANY. YOU WOULD HAVE TO UNLOAD THE MACHINE FROM PLACE ITSELF. OTHERWISE FREE LOADING TRUCKS. THE MACHINE IS IN PERFECT CONDITION. THE MACHINE CAN BE VISITED UP TO THE 02.11.2018 STILL UNDER POWER AND EXTENSIVELY TESTED. PROCEDURES: X 2000 MM (4000 MM) Y AXIS 600 MM Z-AXIS 500 MM DISTANCE TABLE / SPINDLE NOSE MIN. / MAX. 150 / 650 MM ROLLER LINEAR BEARINGS IN ALL AXES UP TO X = 2.000 MM SPINDLE SPEEDS 20 Â?? 15,000 1/MIN MOTOR SPINDLE 15 KW LIQUID COOLED IKZ INTERNAL COOLING DRILLING CAPACITY APPROX. 40 MM MILLING CAPACITY APPROX. 250 CM ³ TAPPING M20 TYPE SK40 OR VDI 40 TOOL HOLDER TOOL MAGAZINE WITH 36 TOOL POSITIONS PARTITIONING FOR DUAL COURT SYSTEM WORKSPACE FULL ENCLOSURE WITH ROOF COMPLETELY CLOSED WORKING SPACE CENTRAL OIL LUBRICATION 2 WORK LIGHTS INTERNAL COOLANT SUPPLY 20 BAR RINSE-GUN WE LOOK FORWARD TO A GOOD COOPERATION AND THANK YOU FOR YOUR INTEREST IN ADVANCE.

Ubicación: TURNING DIAMETER: MAX. 190 MM
TURNING LENGTH: MAX. 620 MM
CONTROL: FANUC 18 ITB
GREATES PASS ROUND OVER BED: 190 MM
SWING DIA. OVER TRAVERSE GUIDEWAY: 190 MM
STANDARD TURNING DIA.: 170 MM
DISTANCE BETWEEN SPINDLES: MAX. 970 MM
:
MAIN SPINDLE::
MAX. SPINDLE SPEED: 4.500 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 18,5 / 15 KW
SPINDLE BEARING DIAMETER: 110 MM
SPINDLE BORE: 80 MM
MAX. BAR CAPACITY: 65 MM
USABLE BAR DIAMETER: 52 MM
SPINDLE NOSE: A2-6
MAX. CHUCKING DIAMETER: 165 MM
C-AXIS: 0,001 °
SPINDLE CENTER HEIGHT - FLOOR: 1.150 MM
:
SUBSPINDLE::
MAX. SPINDLE SPEED: 5.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 11 / 7,5 KW
SPINDLE BEARING DIAMETER: 90 MM
SPINDLE BORE: 63 MM
MAX. BAR CAPACITY: 51 MM
USABLE BAR DIAMETER: - MM
SPINDLE NOSE: A2-5
MAX. CHUCKING DIAMETER: 165 MM
C-AXIS: 0,001 °
SPINDLE CENTER HEIGHT - FLOOR: 1.150 MM
TRAVERSES SUBSPINDLE: 760 MM
:
UPPER TURRET 1::
NUMBER OF TOOLPOSITIONS: (2X 12) 24 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 12 POS.
SHANK DIAMETER: 25 MM
DRILL SHANK DIAMETER: 32 MM
SWITCHING TIME: 0,2 - 0,7 SEC
CHANGE-TIME CHIP TO CHIP: 3,0 SEC
MAX. TOOL DIAMETER: 80 MM
B - AXIS: (+91°/-91°) 182 °
INDEXING: 1 °
Y-AXIS: (+45/-45) 90 MM
:
LOWER TURRET 2::
NUMBER OF TOOLPOSITIONS: (2X 12) 24 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 12 POS.
SHANK DIAMETER: 25 MM
DRILL SHANK DIAMETER: 32 MM
SWITCHING TIME: 0,2 - 0,7 SEC
CHANGE-TIME CHIP TO CHIP: 3,0 SEC
MAX. TOOL DIAMETER: 80 MM
:
TOOL ACTUATION TURRET::
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 6.000 MIN -1
POWER CAPACITY - DRIVEN TOOL-STATIONS: 5,5 / 3,7 KW
NUMBER OF DRIVEN TOOLSPOSITIONS: 2X 12 POS.
SHAFT DIAMETER - MAX. OF THE BOLTS: 25MM / 32 MM
:
AXIS STROKE::
X-AXIS: 1: 345 MM
X-AXIS: 2: 167,5 MM
Y-AXIS: +/- 45 MM
Z-AXIS: 1: 1.240 MM
Z-AXIS: 2: 685 MM
B-AXIS: +/- 91 °
C-AXIS: 1+2: 360 °
:
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 16 / 6 / 40 M/MIN
RAPID B-AXIS: 180° /SEC
RAPID TRAVERSE C-AXIS: 600 MIN/-1
FEED SPEEDS: X: MAX. 16.000 MM/MIN
FEED SPEEDS: Y: MAX. 6.000 MM/MIN
FEED SPEEDS: Z: MAX. 40.000 MM/MIN
TIPP FEED: 0 - 1.260 MM/MIN
FEED SPEEDS: C: 1 - 4.800 °/MIN
:
TOTAL POWER REQUIREMENT: 77 KVA
WEIGHT OF THE MACHINE CA.: 12,5 T
DIMENSIONS OF THE MACHINE CA.: (11,0) 6,0 X 3,7 X 2,5 M
:
ACCESSORIES::
DOCUMENTS:
COOLANTSYSTEM:
CHIP CONVEYOR:
SUBSPINDLE:
TOOL DRIVE MECHANISUM:
Y-AXIS:
C-AXIS:
WORK LIGHT:
BAR FEEDER INTERFACE:
DIV. TOOL HOLDER:
DRIVEN TOOLS: 16 (13X Z / 3X X)
COLLET CHUCK: 2X
BAR FEEDER IRCO SIMAG: OPTION (+ ?13.000,00)
CNC - HIGH-PERFORMANCE- TURNING- AND MILLINGCENTER
NAKAMURA - SUPER NTJ

- MAIN- AND SUBSPINDLE
- UPPER SWIVEL-TURRET INCL. Y-AXIS
- LOWER TURRET
- 2 C-AXIS
- STARTING-UP IN 2004
- OPTION: BARLOADER BREUNING IRCO - SIMAG 70.1R ´1998 (SURCHARGE ?13.000,00)

Ubicación: B 104 OUTSIDE STANDING TANKS B 104.1 TANK 4 50.000 L OUTSIDE STANDING TANK, INSULATED WITH PROPELLER STIRRER, MANUF. IS ABBAB IS STANDING ON A TANK FRAME, FILLED MANUFACTURER YEAR IS: 1987 PRICE UP STANDING POINT: 8.500,00 EURO B 104.2 TANK 3 80.000 L OUTSIDE STANDING TANK,INSULATED WITH A PROPELLER STIRRER, MANUF. IS THRUN D = 3,5 M MANUFACTURER YEAR IS: 1998 PRICE UP STANDING POINT: 14.500,00 EURO 2. B 104.3 TANK 2 50.000 L OUTSIDE STANDING TANK, INSULATED WITH PROPELLER STIRRER, MANUF. IS THRUN D = 2,84 M MANUFACTURER YEAR IS: 1990 PRICE UP STANDING POINT: 12.500,00 EURO B 104.4 TANK 20 50.000 L OUTSIDE STANDING TANK, INSULATED WITH PROPELLER STIRRER, MANUF. IS THRUN D = 3,5M, MANUFACTURER YEAR IS: 1990 NOTE: UP CONTENT 40.000 L THE TANK HAS A LEAKAGE. PRICE UP STANDING POINT: 2.500,00 EURO

Ubicación: Germany, 26215 Wiefelstede

Ubicación: GENERAL PROJECT NO.: 904843 NUMBER: 1 PCS. MANUFACTURER: LONG TYPE: MC 500 CONTROL: SIEMENS 840 D SOLUTIONLINE YEAR OF CONSTRUCTION: 2008 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 1,000 DESCRIPTION MILLING TRAVEL IN X 500 MM TRAVEL IN Y 500 MM TRAVEL IN Z 500 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 40/40/40 M / MIN DIRECT MEASURING SYSTEM X/Y/Z/A/B TOOL HOLDER HSK 50 E MAXIMUM SPEED MILLING SPINDLE 30000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 16,6 KW DISC TOOL MAGAZINE 30 STATIONS MAX TOOL DIAMETER 50 MM MAXIMUM TOOL LENGTH 200 MM ROTARY TABLE SWIVEL UNIT NC-CONTROLLED SWIVEL UNIT WITH COUNTERBEARING RANGE OF-110 TO + 20 DEGREES NC-CONTROLLED ROTARY TABLE ROTARY TABLE DIAMETER 500 MM MORE FACILITIES TOOL MEASUREMENT BY LASER TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA SCRATCH BAND CONVEYORS MINIMAL QUANTITY LUBRICATION GENERAL TECHNICAL DATA TOTAL POWER 40 KVA MACHINE DIMENSIONS (LXWXH) APPROX. 2500 X 3300 X 2500 MM MACHINE WEIGHT 10000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.

Ubicación: Germany, 26215 Wiefelstede

Ubicación: NO. 4468: 1 GEBR. UNIVERSAL MILLING AND BORING MACHINE 5 - AXES FABR. LID MAHO, TYPE DMC 75 V LINEAR BU. 2007 WITH ITNC 530 SMART NC ARB.-BER.: 885 X 600 X 600 MM ACCESSORIES: TOP Ã? 750 MM TABLE LOAD: 800 KG FORK HEAD, SWIVEL RANGE-10 / + 110 ° 30-FACH TOOL CHANGER 3D MEASUREMENT SWITCH M & H 25.10 IKZ 40 BAR, 900 L,. BLUM LASER TOOL MEASUREMENT AND BREAKAGE DETECTION ELECTRONIC HANDWHEEL LAN INTERFACE CHIP CONVEYOR MODE 4 ATC-SOFTWARE OIL MIST EXTRACTION ABOUT 56,500 POWER ON HOURS APPROXIMATELY 28,000 TOTAL - EXCHANGE SPINDLE SPINDLE HOURS IN 2015 WITH APPROXIMATELY 6000 HOURS OTHER: TOOL HOLDER HSK A 63 SPEED 1/MIN FOR 28000 RAPID 90 M / MIN SPINDLE 55 / 43,5 KW TOTAL POWER DEMAND 73 KVA SPACE REQUIREMENT APPROX. 4.6 X 2.5 X 3 M APPROX. WEIGHT 10,2 TO

Ubicación: Germany, 26215 Wiefelstede

Ubicación: DEAR'S SALE, SULZER 6AL 25/30-630/50 BLOCK,STD CRANKSAFT, LINER, PISTON, PUMP, COVER, ETC... GOOD CONDITION BRGDS HAKAN KUSCU +905323642509 INFO@KSCEGE.COM

Ubicación: Germany, 26215 Wiefelstede

Ubicación: DEAR'S SALE, COMPLETE YANMAR S185L-UT STD CRANKSAFT GOOD CONDITION, READY FOR TRANSPORTATION BRGDS HAKAN KUSCU +905323642509 INFO@KSCEGE.COM

Ubicación: Germany, 26215 Wiefelstede

Ubicación: DEAR'S SALE, COMPLETE MAN B&W 8T23LH4E YOM 1988 720 RPM 850 KW STD CRANKSAFT GOOD CONDITION BRGDS HAKAN KUSCU +905323642509 INFO@KSCEGE.COM

Ubicación: OSCILLATION: 1 JA / NEIN
: 1 JA/NEIN
: 1 JA/NEIN
TILTABLE UP TO: 45 - 0 + 45° GRAD
MOTOR OUTPUT: 1,6 - 2,3 KW
TABLE DIMENSIONS: 1440 X 220 MM
WEIGHT: 530 KG

Ubicación: DEAR'S SALE, COMPLETE DEUTZ 6M628 STD CRANKSAFT OVERHAULED , GOOD CONDITION BRGDS HAKAN KUSCU +905323642509 INFO@KSCEGE.COM

Ubicación: X-AXIS: 230 / 230 MM
Z-AXIS: 350 / 350 MM
SPINDLE BORE: 80 / 80 MM
CONTROL: FANUC 2 X OTC
TURNING DIAMETER: 280 / 280 MM
TURNING LENGTH: 300 / 300 MM
DIMENSIONS (L/W/H): 4300 X 2053 X 2150 MM
WEIGHT OF THE MACHINE CA.: 8 T
DOUBLE SPINDLE CNC LATHE NAKAMURA-TOME TW-30 MM

- C AXIS
- NUMBER OF REVOLVERS: 2
- INCREASED ENGINE POWER LEFT AND RIGHT
- TOOL PLACES: 12 + 12
- DRIVEN TOOLS: 12
- BAR LOADER IRCO PROFIMAT II
PASSAGE: 42-64 MM, LENGTH 3 M
- CHIP CONVEYOR: KAKUSAN ENGINEERING

THE MACHINE IS IN A NEAT CONDITION
AND COMES WITH EXTENSIVE ACCESSORIES (CLAMP,
BORING BAR HOLDERS, COLLETS, POWERED TOOLS)

Ubicación: MAKA CNC TYPE: ECM 24 YEAR OF CONSTRUCTION: 1996 2 WORK AREAS EACH 1000 MM L X 1500 MM (DEPTH) B HEIGHT 190 MM TOOL CHANGER WITH 24 SEATS WITH VACUUM PUMP WITH TOOLS THE MACHINE IS IN A CLEAN, READY STATE.

Ubicación: TURNING LENGTH: 600 MM
BAR CAPACITY: 51 MM
DIMENSIONS (L/W/H): 2000 X 1290 X 1610 MM
CONTROL: FANUC 10TF
WEIGHT OF THE MACHINE CA.: 2,5 T
SINGLE-SPINDLE CNC LATHE NAKAMURA-TOME TMC -20LR

- BAR LOADER: STENZEL TURBOSTAR ML-51
- CHIP CONVEYOR: KNOLL
- TOOL PLACES: 10
- INCREASED DRIVE POWER: 11/15 KW

THE MACHINE COMES WITH EXTENSIVE ACCESSORIES:
CLAMPING JAWS, FEED STOPS, CLAMP HOLDERS, ETC