1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-year of construction: approx. 1985
maximum schweiã?lstg.: 500 amps.
machine weight: approx. 500 kg

equipment / accessories:

incl. water cooled torch
external wire feeder knife griesheim dvb 1
water cooling

all specifications were created after bestm knowledge and existing documents; expressly reserved by mistake.
every interested party can advance test under power the protective gas welding machine.
 YEAR OF CONSTRUCTION: APPROX. 1985 MAXIMUM SCHWEIÃ?LSTG.: 500 AMPS. MACHINE WEIGHT: APPROX. 500 KG EQUIPMENT / ACCESSORIES: INCL. WATER COOLED TORCH EXTERNAL WIRE FEEDER KNIFE GRIESHEIM DVB 1 WATER COOLING ALL SPECIFICATIONS WERE CREATED AFTER BESTM KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EVERY INTERESTED PARTY CAN ADVANCE TEST UNDER POWER THE PROTECTIVE GAS WELDING MACHINE.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-make donati srl calcio (it), type pvc/r2, mach.no. ntp 700/520, elevator belt , material mild steel , belt material plastic , belt width 530mm, belt length 5200mm, with carriers , carrier height 50mm, with side guides /brushes, with motor 1,5 kw, 220/380 volt, mounted on frame , floorspace 7,0x1,2 m, weight 640 kgconveyor beltsconveyor screws > conveyor belts what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DONATI SRL CALCIO (IT), TYPE PVC/R2, MACH.NO. NTP 700/520, ELEVATOR BELT , MATERIAL MILD STEEL , BELT MATERIAL PLASTIC , BELT WIDTH 530MM, BELT LENGTH 5200MM, WITH CARRIERS , CARRIER HEIGHT 50MM, WITH SIDE GUIDES /BRUSHES, WITH MOTOR 1,5 KW, 220/380 VOLT, MOUNTED ON FRAME , FLOORSPACE 7,0X1,2 M, WEIGHT 640 KGCONVEYOR BELTSCONVEYOR SCREWS > CONVEYOR BELTS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 3.450 €
Ubicación: Land-altendorf panel saw
type f 45
swiveling 45â°
motor power 7,5 kw
motor brake
table extension
extension table
guide fence
star delta
saw blade diameter of 450 mm
from the running of the school, good condition
checked ALTENDORF PANEL SAW TYPE F 45 SWIVELING 45° MOTOR POWER 7,5 KW MOTOR BRAKE TABLE EXTENSION EXTENSION TABLE GUIDE FENCE STAR DELTA SAW BLADE DIAMETER OF 450 MM FROM THE RUNNING OF THE SCHOOL, GOOD CONDITION CHECKED
Vendedor: Optimal Maschinen UG (haftungsbeschränkt)
Año de construcción: usado
Ubicación: Land-make lecrenier s.a., no unknown manufacturingtag is missing, mounted on frame , cutter , material stainless steel , capacity 44 ltr, diameter 490 mm, depth 270 mm, knive material stainless steel , knive diameter dia.300mm, number of knive blades 2x, with scraper (motor 0,75 kw, 220.380 volt -37 rpm), inlet dia. 48mm, outlet dia.58mm, can be tilted , working pressure vacuum, with jacket , working pressure unknown, max. temperature unknown, motor +\- 7,5 kw, speed +\- 1500 rpm, floorspace 1,3x1,1 m, total height 1,8 m, weight 400 kgcuttersgrinders > cutters what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE LECRENIER S.A., NO UNKNOWN MANUFACTURINGTAG IS MISSING, MOUNTED ON FRAME , CUTTER , MATERIAL STAINLESS STEEL , CAPACITY 44 LTR, DIAMETER 490 MM, DEPTH 270 MM, KNIVE MATERIAL STAINLESS STEEL , KNIVE DIAMETER DIA.300MM, NUMBER OF KNIVE BLADES 2X, WITH SCRAPER (MOTOR 0,75 KW, 220.380 VOLT -37 RPM), INLET DIA. 48MM, OUTLET DIA.58MM, CAN BE TILTED , WORKING PRESSURE VACUUM, WITH JACKET , WORKING PRESSURE UNKNOWN, MAX. TEMPERATURE UNKNOWN, MOTOR +\- 7,5 KW, SPEED +\- 1500 RPM, FLOORSPACE 1,3X1,1 M, TOTAL HEIGHT 1,8 M, WEIGHT 400 KGCUTTERSGRINDERS > CUTTERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 4.800 €
Ubicación: Land-martin dressing planer
type t 52
planing width 500 mm
total length of table 2840 mm
greatest depth - depth of cut 16 mm
5000 rpm.
power of the engine 5.5 kw
motor brake
operation via foot pedal
ab fence
gs mark
from the running of the school, very good condition
checked MARTIN DRESSING PLANER TYPE T 52 PLANING WIDTH 500 MM TOTAL LENGTH OF TABLE 2840 MM GREATEST DEPTH - DEPTH OF CUT 16 MM 5000 RPM. POWER OF THE ENGINE 5.5 KW MOTOR BRAKE OPERATION VIA FOOT PEDAL AB FENCE GS MARK FROM THE RUNNING OF THE SCHOOL, VERY GOOD CONDITION CHECKED
Vendedor: Optimal Maschinen UG (haftungsbeschränkt)
Año de construcción: usado
Ubicación: Land-7,7 to, aircondition, 2 double acting lines, 1 hydr. quick coupler line, , powertilt with hydr. quick coupler new in 2019, 3 buckets; power [ps]: 64; gross weight [kg]: 7700; engine: yanmar 4tne98-tb 7,7 TO, AIRCONDITION, 2 DOUBLE ACTING LINES, 1 HYDR. QUICK COUPLER LINE, , POWERTILT WITH HYDR. QUICK COUPLER NEW IN 2019, 3 BUCKETS; POWER [PS]: 64; GROSS WEIGHT [KG]: 7700; ENGINE: YANMAR 4TNE98-TB
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Precio: 1.150 €
Ubicación: Land-hema wood band saw
type of guarantor 50
roll diameter 500 mm
apa ribbon guides up / down
table tiltable
motor output 1,5 kw
motor brake
stop
gs mark
from school
checked HEMA WOOD BAND SAW TYPE OF GUARANTOR 50 ROLL DIAMETER 500 MM APA RIBBON GUIDES UP / DOWN TABLE TILTABLE MOTOR OUTPUT 1,5 KW MOTOR BRAKE STOP GS MARK FROM SCHOOL CHECKED
Vendedor: Optimal Maschinen UG (haftungsbeschränkt)
Año de construcción: usado
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 600 x 1400 mm<br/>description: with chip breaker groove and pendulum tilt table WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 600 X 1400 MM
DESCRIPTION: WITH CHIP BREAKER GROOVE AND PENDULUM TILT TABLE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-spare parts for mammography equipment make: ge type: dmr
model number: zfhoodmr type: 2102284

we have many working parts.
ask for the individual parts.

you will receive a quick reply with quotation. SPARE PARTS FOR MAMMOGRAPHY EQUIPMENT MAKE: GE TYPE: DMR MODEL NUMBER: ZFHOODMR TYPE: 2102284 WE HAVE MANY WORKING PARTS. ASK FOR THE INDIVIDUAL PARTS. YOU WILL RECEIVE A QUICK REPLY WITH QUOTATION.
Vendedor: Wilbert Medizintechnik
Año de construcción: usado
Precio: used machinery auction RESALE 89.250 €
Ubicación: Land-weight approx.: 9000 kg<br/>dimensions (l x w x h) approx.: 19350 x 4080 x 3000 mm<br/>description: - the high-performance cutting line ? fast, precise, flexible<br> - wood cross-section from 200 x 450 mm<br> - swivel-cut saw with flangeless saw blade, 360° rotable and 90° slewable<br> - turret trimming unit equipped with 3 tools. it allows a lot of different processings: tanner- or hook blade, ridge blade, offsets, cerves, cone in all positions, concealed exfoliations and much more<br> - vertical finger milling tool: this vertical milling machine can be equipped with different milling cutters ? for milling of folds, cutouts und freely definable profiles<br> - maximum length of wood feed table: 8.000 mm (13.000 mm)<br> - maximum wood length take-off table: 8.000 mm (13.000 mm)<br> WEIGHT APPROX.: 9000 KG
DIMENSIONS (L X W X H) APPROX.: 19350 X 4080 X 3000 MM
DESCRIPTION: - THE HIGH-PERFORMANCE CUTTING LINE ? FAST, PRECISE, FLEXIBLE
- WOOD CROSS-SECTION FROM 200 X 450 MM
- SWIVEL-CUT SAW WITH FLANGELESS SAW BLADE, 360° ROTABLE AND 90° SLEWABLE
- TURRET TRIMMING UNIT EQUIPPED WITH 3 TOOLS. IT ALLOWS A LOT OF DIFFERENT PROCESSINGS: TANNER- OR HOOK BLADE, RIDGE BLADE, OFFSETS, CERVES, CONE IN ALL POSITIONS, CONCEALED EXFOLIATIONS AND MUCH MORE
- VERTICAL FINGER MILLING TOOL: THIS VERTICAL MILLING MACHINE CAN BE EQUIPPED WITH DIFFERENT MILLING CUTTERS ? FOR MILLING OF FOLDS, CUTOUTS UND FREELY DEFINABLE PROFILES
- MAXIMUM LENGTH OF WOOD FEED TABLE: 8.000 MM (13.000 MM)
- MAXIMUM WOOD LENGTH TAKE-OFF TABLE: 8.000 MM (13.000 MM)
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.850 €
Ubicación: Land-panhans wood band saw
type bod 630
roll diameter 630 mm
apa- / p tours up and down
motor 2,2 kw
motor brake
max cutting height 360 mm, maximum cutting width 610 mm
table tiltable
workplace lighting
checked - very good condition! PANHANS WOOD BAND SAW TYPE BOD 630 ROLL DIAMETER 630 MM APA- / P TOURS UP AND DOWN MOTOR 2,2 KW MOTOR BRAKE MAX CUTTING HEIGHT 360 MM, MAXIMUM CUTTING WIDTH 610 MM TABLE TILTABLE WORKPLACE LIGHTING CHECKED - VERY GOOD CONDITION!
Vendedor: Optimal Maschinen UG (haftungsbeschränkt)
Año de construcción: usado
Ubicación: Land-weight approx.: 9000 kg<br/>dimensions (l x w x h) approx.: 19350 x 4080 x 3000 mm<br/>description: - the high-performance cutting line ? fast, precise, flexible<br> - wood cross-section from 200 x 450 mm<br> - swivel-cut saw with flangeless saw blade, 360° rotable and 90° slewable<br> - turret trimming unit equipped with 3 tools. it allows a lot of different processings: tanner- or hook blade, ridge blade, offsets, cerves, cone in all positions, concealed exfoliations and much more<br> - vertical finger milling tool: this vertical milling machine can be equipped with different milling cutters ? for milling of folds, cutouts und freely definable profiles<br> - maximum length of wood feed table: 8.000 mm (13.000 mm)<br> - maximum wood length take-off table: 8.000 mm (13.000 mm)<br> WEIGHT APPROX.: 9000 KG
DIMENSIONS (L X W X H) APPROX.: 19350 X 4080 X 3000 MM
DESCRIPTION: - THE HIGH-PERFORMANCE CUTTING LINE ? FAST, PRECISE, FLEXIBLE
- WOOD CROSS-SECTION FROM 200 X 450 MM
- SWIVEL-CUT SAW WITH FLANGELESS SAW BLADE, 360° ROTABLE AND 90° SLEWABLE
- TURRET TRIMMING UNIT EQUIPPED WITH 3 TOOLS. IT ALLOWS A LOT OF DIFFERENT PROCESSINGS: TANNER- OR HOOK BLADE, RIDGE BLADE, OFFSETS, CERVES, CONE IN ALL POSITIONS, CONCEALED EXFOLIATIONS AND MUCH MORE
- VERTICAL FINGER MILLING TOOL: THIS VERTICAL MILLING MACHINE CAN BE EQUIPPED WITH DIFFERENT MILLING CUTTERS ? FOR MILLING OF FOLDS, CUTOUTS UND FREELY DEFINABLE PROFILES
- MAXIMUM LENGTH OF WOOD FEED TABLE: 8.000 MM (13.000 MM)
- MAXIMUM WOOD LENGTH TAKE-OFF TABLE: 8.000 MM (13.000 MM)
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-year built: approx 1972
max tube length: 1500 mm
maximum pipe diameter: 40 x 3 mm
total power consumption: approx. 3 kw / 380 v
machine weight: 800 kg

equipment / accessories:

div. bending tools

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the machine before purchasing power.
one ord. rchng. plus ges. vat will be issued. YEAR BUILT: APPROX 1972 MAX TUBE LENGTH: 1500 MM MAXIMUM PIPE DIAMETER: 40 X 3 MM TOTAL POWER CONSUMPTION: APPROX. 3 KW / 380 V MACHINE WEIGHT: 800 KG EQUIPMENT / ACCESSORIES: DIV. BENDING TOOLS ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE MACHINE BEFORE PURCHASING POWER. ONE ORD. RCHNG. PLUS GES. VAT WILL BE ISSUED.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: used machinery auction RESALE 320 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 700 x 270 x 550 mm<br/>description: please take a look of the machine plate foto WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 270 X 550 MM
DESCRIPTION: PLEASE TAKE A LOOK OF THE MACHINE PLATE FOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-trumpf bending machine mod trumabend v85 / bj. 96 / 2000 x 85 t / hub 215 / camber / cnc delem / hours: 3,300 / accessories / good condition
fe.gi.maschinen.sbg.at

trumpf press brake mod trumabend v85 / year 96 / 2000 x 85 t / stroke 215 / crowing / cnc delem / hours: 3,300 / accessories / good conditions fe.gi.maschinen.sbg.at TRUMPF BENDING MACHINE MOD TRUMABEND V85 / BJ. 96 / 2000 X 85 T / HUB 215 / CAMBER / CNC DELEM / HOURS: 3,300 / ACCESSORIES / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT TRUMPF PRESS BRAKE MOD TRUMABEND V85 / YEAR 96 / 2000 X 85 T / STROKE 215 / CROWING / CNC DELEM / HOURS: 3,300 / ACCESSORIES / GOOD CONDITIONS FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-weight approx.: 12000 kg<br/>dimensions (l x w x h) approx.: 3100 x 3100 x 800 mm<br/>description: footprint 2500 x 2500 mm, spiral breaker was renewed in 2016, self disassembly is possible WEIGHT APPROX.: 12000 KG
DIMENSIONS (L X W X H) APPROX.: 3100 X 3100 X 800 MM
DESCRIPTION: FOOTPRINT 2500 X 2500 MM, SPIRAL BREAKER WAS RENEWED IN 2016, SELF DISASSEMBLY IS POSSIBLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-tray shrink packer smi sk 300 t, never installed

this tray - shrink wrapper was made by italian smi in 2006 and it has never been installed. it is an automatic machine for packing plastic, metal, cardboard and glass containers. the machine packs containers on a carton pad, folds the pad into a tray and wraps a film around the pack and it is set up for glass bottles in format 6 x 4. this machine has never been used, stored properly indoors and is ready for immediate delivery.

make: smi s.p.a., italy
model: sk 300 t
year: 2006
serial no: pc06162/s8357
capacity: 30 packs/min
current format: 6 x 4
electricity: 380 v, 50 hz
running hours: zero
condition: never used, good condition   TRAY SHRINK PACKER SMI SK 300 T, NEVER INSTALLED THIS TRAY - SHRINK WRAPPER WAS MADE BY ITALIAN SMI IN 2006 AND IT HAS NEVER BEEN INSTALLED. IT IS AN AUTOMATIC MACHINE FOR PACKING PLASTIC, METAL, CARDBOARD AND GLASS CONTAINERS. THE MACHINE PACKS CONTAINERS ON A CARTON PAD, FOLDS THE PAD INTO A TRAY AND WRAPS A FILM AROUND THE PACK AND IT IS SET UP FOR GLASS BOTTLES IN FORMAT 6 X 4. THIS MACHINE HAS NEVER BEEN USED, STORED PROPERLY INDOORS AND IS READY FOR IMMEDIATE DELIVERY. MAKE: SMI S.P.A., ITALY MODEL: SK 300 T YEAR: 2006 SERIAL NO: PC06162/S8357 CAPACITY: 30 PACKS/MIN CURRENT FORMAT: 6 X 4 ELECTRICITY: 380 V, 50 HZ RUNNING HOURS: ZERO CONDITION: NEVER USED, GOOD CONDITION
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 400 kg<br/>dimensions (l x w x h) approx.: 2100 x 2100 x 2700 mm<br/>description: inhouse version, contents desk, refrigerator, drawer cabinet with 3 drawers, light, sockets and circuit breaker WEIGHT APPROX.: 400 KG
DIMENSIONS (L X W X H) APPROX.: 2100 X 2100 X 2700 MM
DESCRIPTION: INHOUSE VERSION, CONTENTS DESK, REFRIGERATOR, DRAWER CABINET WITH 3 DRAWERS, LIGHT, SOCKETS AND CIRCUIT BREAKER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-glass heating furnace gt1411, year 2008

this furnace is used for heat treating of glass. the electric heaters heat up flat glass to desired temperature and the glass can be coated or treated in the coating section. the glass panel is then held in the annealing section for desired time and temperature. the loading and unloading of glass panels is done manually onto and from the roller tables. the conveyers are bushing rubber rollers to prevent the glass from scratching. the rollers are driven individually by frequency motors.

the furnace body is insulated with aluminum silicate for high efficiency. ceramic quartz rollers with low thermal expansion rate are used in heating, coating and front annealing section, and a stainless steel roller wrapped with ropes is used in lower annealing section. the furnace is equipped with an so2 gas feeding device. the feeding of gas lubricates and protects the lower surface of the glass during the production cycle.

the complete delivery includes loading and unloading tables, furnace, control system and auxiliary facilities.

make: qinhuangdao tucheng glass technology co, china
model: gt1411
year: 2008
capacity: 4.0 – 8.5 m/min clear sheet glass
top temperature: 600 - 630 °c
electricity: 250 kw, 380 v, 3-phase
dimensions: 8.0 x 2.9 x 2.4 m (lxwxh)
weight: 10 tons
temperature controller: omron ej1
control plc: siemens simatic s7-300   GLASS HEATING FURNACE GT1411, YEAR 2008 THIS FURNACE IS USED FOR HEAT TREATING OF GLASS. THE ELECTRIC HEATERS HEAT UP FLAT GLASS TO DESIRED TEMPERATURE AND THE GLASS CAN BE COATED OR TREATED IN THE COATING SECTION. THE GLASS PANEL IS THEN HELD IN THE ANNEALING SECTION FOR DESIRED TIME AND TEMPERATURE. THE LOADING AND UNLOADING OF GLASS PANELS IS DONE MANUALLY ONTO AND FROM THE ROLLER TABLES. THE CONVEYERS ARE BUSHING RUBBER ROLLERS TO PREVENT THE GLASS FROM SCRATCHING. THE ROLLERS ARE DRIVEN INDIVIDUALLY BY FREQUENCY MOTORS. THE FURNACE BODY IS INSULATED WITH ALUMINUM SILICATE FOR HIGH EFFICIENCY. CERAMIC QUARTZ ROLLERS WITH LOW THERMAL EXPANSION RATE ARE USED IN HEATING, COATING AND FRONT ANNEALING SECTION, AND A STAINLESS STEEL ROLLER WRAPPED WITH ROPES IS USED IN LOWER ANNEALING SECTION. THE FURNACE IS EQUIPPED WITH AN SO2 GAS FEEDING DEVICE. THE FEEDING OF GAS LUBRICATES AND PROTECTS THE LOWER SURFACE OF THE GLASS DURING THE PRODUCTION CYCLE. THE COMPLETE DELIVERY INCLUDES LOADING AND UNLOADING TABLES, FURNACE, CONTROL SYSTEM AND AUXILIARY FACILITIES. MAKE: QINHUANGDAO TUCHENG GLASS TECHNOLOGY CO, CHINA MODEL: GT1411 YEAR: 2008 CAPACITY: 4.0 – 8.5 M/MIN CLEAR SHEET GLASS TOP TEMPERATURE: 600 - 630 °C ELECTRICITY: 250 KW, 380 V, 3-PHASE DIMENSIONS: 8.0 X 2.9 X 2.4 M (LXWXH) WEIGHT: 10 TONS TEMPERATURE CONTROLLER: OMRON EJ1 CONTROL PLC: SIEMENS SIMATIC S7-300
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear SIZES FROM 5 KG DOUGH/7 LTR. UNTIL 60 KG/75 LTR.\R\N1 SPEED (OPTIONAL WITH 2 SPEEDS), WHITE PAINTED STEEL BODY, BOWL + SPIRAL + DOUGH DEFLECTOR + SAFETY RACK MADE OF STAINLESS STEEL\R\NBOWL IS COUNTERROTATING (OPTIONAL WITH REMOVABLE BOWL)\R\NCHAIN DRIVE, SELF-OILING STEP-DOWN-GEAR
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-automatic all around packer krones variopac pfs 45
  
this krones variopac pfs 45 is currently in use, is perfectly maintained and has less than 6500 running hours. it is currently being used for stretch film multipacks only. it comes complete with the infeed table and heating tunnel. the equipment is currently being used for 250ml, 300ml, 350ml and 500 ml. its maximum speed is 45 tact/minute. the equipment is available at the end of q2 of 2016.
 
make: krones / kettner
type: variopac pfs 45
serial: 22/0380/025
manufacturing year 2002
capacity: up to 45 tact / hour
running hours: less than 6.500 hrs
container handling: pet bottles 250, 300, 350 and 500 ml
current package: shrink film only
electricity: 460 v / 60 hz   AUTOMATIC ALL AROUND PACKER KRONES VARIOPAC PFS 45 THIS KRONES VARIOPAC PFS 45 IS CURRENTLY IN USE, IS PERFECTLY MAINTAINED AND HAS LESS THAN 6500 RUNNING HOURS. IT IS CURRENTLY BEING USED FOR STRETCH FILM MULTIPACKS ONLY. IT COMES COMPLETE WITH THE INFEED TABLE AND HEATING TUNNEL. THE EQUIPMENT IS CURRENTLY BEING USED FOR 250ML, 300ML, 350ML AND 500 ML. ITS MAXIMUM SPEED IS 45 TACT/MINUTE. THE EQUIPMENT IS AVAILABLE AT THE END OF Q2 OF 2016. MAKE: KRONES / KETTNER TYPE: VARIOPAC PFS 45 SERIAL: 22/0380/025 MANUFACTURING YEAR 2002 CAPACITY: UP TO 45 TACT / HOUR RUNNING HOURS: LESS THAN 6.500 HRS CONTAINER HANDLING: PET BOTTLES 250, 300, 350 AND 500 ML CURRENT PACKAGE: SHRINK FILM ONLY ELECTRICITY: 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-longitudinal + diagonal cutting possible\r\nit is an auxiliary for a precise and accurately defined cut of bakery products on trays. LONGITUDINAL + DIAGONAL CUTTING POSSIBLE\R\NIT IS AN AUXILIARY FOR A PRECISE AND ACCURATELY DEFINED CUT OF BAKERY PRODUCTS ON TRAYS.
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-ionized air can rinser trans-tech hysek 120 000 cph
 
this german built trans-tech can rinser with 2x bmh empty can inverters was built and installed in 2011. it is in excellent conditions. it comes with a 180 degree can twister on the top part, the ionized air rinser (with pumps and treatment) and a 180 degree upright twister on the bottom of the rinser. the platform and supports are included. the equipment is installed and in use, and can be inspected in operation.
 
make: trans-tech hysek and bmh feed gear
manufacturing year: 2011
capacity: up to 2.000 can per minute (120 000 cph)
running hours: less than 8.000 hrs
container handling: 8oz – 66mm diameter / 87mm height
350ml – 66 mm diameter / 122 mm height
473ml – 66 mm diameter / 157 mm height
10.5oz – 57 mm diameter / 138 mm heigth
electricity: 460 v / 60 hz   IONIZED AIR CAN RINSER TRANS-TECH HYSEK 120 000 CPH THIS GERMAN BUILT TRANS-TECH CAN RINSER WITH 2X BMH EMPTY CAN INVERTERS WAS BUILT AND INSTALLED IN 2011. IT IS IN EXCELLENT CONDITIONS. IT COMES WITH A 180 DEGREE CAN TWISTER ON THE TOP PART, THE IONIZED AIR RINSER (WITH PUMPS AND TREATMENT) AND A 180 DEGREE UPRIGHT TWISTER ON THE BOTTOM OF THE RINSER. THE PLATFORM AND SUPPORTS ARE INCLUDED. THE EQUIPMENT IS INSTALLED AND IN USE, AND CAN BE INSPECTED IN OPERATION. MAKE: TRANS-TECH HYSEK AND BMH FEED GEAR MANUFACTURING YEAR: 2011 CAPACITY: UP TO 2.000 CAN PER MINUTE (120 000 CPH) RUNNING HOURS: LESS THAN 8.000 HRS CONTAINER HANDLING: 8OZ – 66MM DIAMETER / 87MM HEIGHT 350ML – 66 MM DIAMETER / 122 MM HEIGHT 473ML – 66 MM DIAMETER / 157 MM HEIGHT 10.5OZ – 57 MM DIAMETER / 138 MM HEIGTH ELECTRICITY: 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-2 cylinders, cap. variable speed 4 - 26 rpm\r\ncylinder diameter 2 pcs. 95 mm, grooved\r\n                            length 300 mm\r\ntemplate with 3 holes d 25 mm, distance 110 mm\r\ntemplate changeable\r\n 2 CYLINDERS, CAP. VARIABLE SPEED 4 - 26 RPM\R\NCYLINDER DIAMETER 2 PCS. 95 MM, GROOVED\R\N LENGTH 300 MM\R\NTEMPLATE WITH 3 HOLES D 25 MM, DISTANCE 110 MM\R\NTEMPLATE CHANGEABLE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-labeling machine krones contiroll hs 966-24, year 2012
 
this krones contiroll roll feed sleever has been used for three years before it was professionally dismantled, packaged for transportation and placed in a warehouse. it makes wrap-around plastic labels glued with two narrow strips of hotmelt glue on both ends of the label. labels are fed on two rolls and change from one to another roll is automatic. the machine is in very good condition, safely stored and ready for shipment. it has been used for wrap around label up to 45 000 bph using 20 oz hot fill vitamin water.
 
the equipment has following features:
 
- parallel configuration u (infeed and outfeed on same side)
- bottle orientation by vision system
- motorized bottle tabels, using servo motors
- cutting system plates using servo motor
- label lengths of between 172 mm and 640 mm can be handled with one labeling station
- motorized double reels with automatic splicing of the label webs during reel change-over
- all label transfers are done by vacuum grip system
- replaceable hot melt gluing unit
 
manufacturer: krones
type: contiroll hs 960-24 roll feed
manufactured in: 2012
type/serial: 810+764
capacity max: 750 bpm (45.000 bph)
container material: pet
running hours: approx 22.000
power / voltage: 460/266 v - 60 hz   LABELING MACHINE KRONES CONTIROLL HS 966-24, YEAR 2012 THIS KRONES CONTIROLL ROLL FEED SLEEVER HAS BEEN USED FOR THREE YEARS BEFORE IT WAS PROFESSIONALLY DISMANTLED, PACKAGED FOR TRANSPORTATION AND PLACED IN A WAREHOUSE. IT MAKES WRAP-AROUND PLASTIC LABELS GLUED WITH TWO NARROW STRIPS OF HOTMELT GLUE ON BOTH ENDS OF THE LABEL. LABELS ARE FED ON TWO ROLLS AND CHANGE FROM ONE TO ANOTHER ROLL IS AUTOMATIC. THE MACHINE IS IN VERY GOOD CONDITION, SAFELY STORED AND READY FOR SHIPMENT. IT HAS BEEN USED FOR WRAP AROUND LABEL UP TO 45 000 BPH USING 20 OZ HOT FILL VITAMIN WATER. THE EQUIPMENT HAS FOLLOWING FEATURES: - PARALLEL CONFIGURATION U (INFEED AND OUTFEED ON SAME SIDE) - BOTTLE ORIENTATION BY VISION SYSTEM - MOTORIZED BOTTLE TABELS, USING SERVO MOTORS - CUTTING SYSTEM PLATES USING SERVO MOTOR - LABEL LENGTHS OF BETWEEN 172 MM AND 640 MM CAN BE HANDLED WITH ONE LABELING STATION - MOTORIZED DOUBLE REELS WITH AUTOMATIC SPLICING OF THE LABEL WEBS DURING REEL CHANGE-OVER - ALL LABEL TRANSFERS ARE DONE BY VACUUM GRIP SYSTEM - REPLACEABLE HOT MELT GLUING UNIT MANUFACTURER: KRONES TYPE: CONTIROLL HS 960-24 ROLL FEED MANUFACTURED IN: 2012 TYPE/SERIAL: 810+764 CAPACITY MAX: 750 BPM (45.000 BPH) CONTAINER MATERIAL: PET RUNNING HOURS: APPROX 22.000 POWER / VOLTAGE: 460/266 V - 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-automatic input belt -width 500 mm - speeds variabel\r\nlongitudinal + diagonal cutting\r\nmax. cutting height 75 mm, cap. ca. 150 cakes/h\r\n AUTOMATIC INPUT BELT -WIDTH 500 MM - SPEEDS VARIABEL\R\NLONGITUDINAL + DIAGONAL CUTTING\R\NMAX. CUTTING HEIGHT 75 MM, CAP. CA. 150 CAKES/H\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-type of machine: universal milling machine,.
manufacturer: auerbach.
model: f315.
year of construction: 1992.
condition: very good,.
type of offer: used machine,
     ,.	
technical data:.
table: 1240 x 335 mm.
paths:.
x = 850 mm,. 
y = 330 mm,
z = 440 mm,.
spindle speed: 56-2800 rpm,.
spindle retainer: sk 40.
drive: 4.0 kw.
comment:.
3-axis digital display screen.
horizontal milling facility.
1 long milling arbor.
5 short sk40 tool holders.
coolant system.
operating instructions.
weight: 2000 kg,
     ,.	
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location.,.
    ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE: UNIVERSAL MILLING MACHINE,. MANUFACTURER: AUERBACH. MODEL: F315. YEAR OF CONSTRUCTION: 1992. CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. TABLE: 1240 X 335 MM. PATHS:. X = 850 MM,. Y = 330 MM, Z = 440 MM,. SPINDLE SPEED: 56-2800 RPM,. SPINDLE RETAINER: SK 40. DRIVE: 4.0 KW. COMMENT:. 3-AXIS DIGITAL DISPLAY SCREEN. HORIZONTAL MILLING FACILITY. 1 LONG MILLING ARBOR. 5 SHORT SK40 TOOL HOLDERS. COOLANT SYSTEM. OPERATING INSTRUCTIONS. WEIGHT: 2000 KG, ,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-electronic control panel,\r\ntemperature range -20 ° bis + 50 ° c\r\ninside + outside stainless steel\r\ndimensions outside    t 2.960, b   1.220 mm, h 2.600  mm\r\n ELECTRONIC CONTROL PANEL,\R\NTEMPERATURE RANGE -20 ° BIS + 50 ° C\R\NINSIDE + OUTSIDE STAINLESS STEEL\R\NDIMENSIONS OUTSIDE T 2.960, B 1.220 MM, H 2.600 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-complete pet bottle filling line 5.500 bph

this complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. the line has filling non carbonated soft drinks in pet bottles cap pco 28 mm. frequent maintenance is still taking place (greasing and startup / test runs). it is completely installed and in excellent condition. dry end of the line is being used for repacking purpose. line has run 3 different bottle formats (biggest 2.0 liters). spare parts (limited) are available, all documentation is available. the line is in good condition, installed and powered and can be tested.

make: various, see details
built: 2006/2007 – installed 2007
capacity: up to 5.500 bph
container handling: pet, 8 oz to 2.0 liters
condition: good
running hours: 16500 hrs
power / voltage: 460 v / 60 hz

equipment included:

- bohm pressure vessel – 900 liters – type 2360
- aquafine uv desinfection unit
- kaeser air dryer + 40 bar air compressor – thp212 + csdx 137, 3580 l/min, 75.0 kw
- barter co2 filter – ebco 1500
- ingersoll rand – 7bar compressor
- 2x lmi dosing pumps and meters
- evapco cooling tower – pmc-220e
- membrafe amoniak membrame cooling – rl500-3
- 2x vilter amoniak compressors – zl46
- 1x pentair water filter
- pumps & filters (various)
- kosme preform hopper
- kosme preform elevating conveyor pfa 1500, 0.37 kw, 50 hz
- kosme preform alignment infeed conveyor
- kosme ksb 4l – linear blow moulder – 4 heads, 68 kw, 50 hz
- mta chiller for kosme blow moulder, 6 bar, 11.6 kw, 220 v / 60 hz
- mesal air conveyors, linear curves, 9 motors
- mesal manual outfeed airconveyor to labeler (height adjustment)
- trine wrap around labeler + glue pump
- mesal manual airconveyor infeed from labeler (height adjustment)
- mesal mixer for csd
- amoniak cooler mesal + alfa laval phe (m10-bwfm, 10 bar, 34.89 l)
- mesal rinser,filler,capper (tribloc 30/30/10) – manual infeed of caps
- mesal bottle conveyors + ss conveyor belts
- visial lightbox full bottle inspection (manual)
- control panel for conveyors + filler danfoss drives
- vitz packers, mechanical wrap only packer for 12 packs + heat tunnel, ht 74 de
- outfeed conveyor (manual palletizing)
- optional = 2x ss sugar dissolving tanks
- optional = 2x ss storage buffer tanks    COMPLETE PET BOTTLE FILLING LINE 5.500 BPH THIS COMPLETE LINE HAS BEEN BUILT IN 2006 AND 2007 – INSTALLED IN 2007 AND HAS BEEN TAKEN OUT OF SERVICE IN 2016. THE LINE HAS FILLING NON CARBONATED SOFT DRINKS IN PET BOTTLES CAP PCO 28 MM. FREQUENT MAINTENANCE IS STILL TAKING PLACE (GREASING AND STARTUP / TEST RUNS). IT IS COMPLETELY INSTALLED AND IN EXCELLENT CONDITION. DRY END OF THE LINE IS BEING USED FOR REPACKING PURPOSE. LINE HAS RUN 3 DIFFERENT BOTTLE FORMATS (BIGGEST 2.0 LITERS). SPARE PARTS (LIMITED) ARE AVAILABLE, ALL DOCUMENTATION IS AVAILABLE. THE LINE IS IN GOOD CONDITION, INSTALLED AND POWERED AND CAN BE TESTED. MAKE: VARIOUS, SEE DETAILS BUILT: 2006/2007 – INSTALLED 2007 CAPACITY: UP TO 5.500 BPH CONTAINER HANDLING: PET, 8 OZ TO 2.0 LITERS CONDITION: GOOD RUNNING HOURS: 16500 HRS POWER / VOLTAGE: 460 V / 60 HZ EQUIPMENT INCLUDED: - BOHM PRESSURE VESSEL – 900 LITERS – TYPE 2360 - AQUAFINE UV DESINFECTION UNIT - KAESER AIR DRYER + 40 BAR AIR COMPRESSOR – THP212 + CSDX 137, 3580 L/MIN, 75.0 KW - BARTER CO2 FILTER – EBCO 1500 - INGERSOLL RAND – 7BAR COMPRESSOR - 2X LMI DOSING PUMPS AND METERS - EVAPCO COOLING TOWER – PMC-220E - MEMBRAFE AMONIAK MEMBRAME COOLING – RL500-3 - 2X VILTER AMONIAK COMPRESSORS – ZL46 - 1X PENTAIR WATER FILTER - PUMPS & FILTERS (VARIOUS) - KOSME PREFORM HOPPER - KOSME PREFORM ELEVATING CONVEYOR PFA 1500, 0.37 KW, 50 HZ - KOSME PREFORM ALIGNMENT INFEED CONVEYOR - KOSME KSB 4L – LINEAR BLOW MOULDER – 4 HEADS, 68 KW, 50 HZ - MTA CHILLER FOR KOSME BLOW MOULDER, 6 BAR, 11.6 KW, 220 V / 60 HZ - MESAL AIR CONVEYORS, LINEAR CURVES, 9 MOTORS - MESAL MANUAL OUTFEED AIRCONVEYOR TO LABELER (HEIGHT ADJUSTMENT) - TRINE WRAP AROUND LABELER + GLUE PUMP - MESAL MANUAL AIRCONVEYOR INFEED FROM LABELER (HEIGHT ADJUSTMENT) - MESAL MIXER FOR CSD - AMONIAK COOLER MESAL + ALFA LAVAL PHE (M10-BWFM, 10 BAR, 34.89 L) - MESAL RINSER,FILLER,CAPPER (TRIBLOC 30/30/10) – MANUAL INFEED OF CAPS - MESAL BOTTLE CONVEYORS + SS CONVEYOR BELTS - VISIAL LIGHTBOX FULL BOTTLE INSPECTION (MANUAL) - CONTROL PANEL FOR CONVEYORS + FILLER DANFOSS DRIVES - VITZ PACKERS, MECHANICAL WRAP ONLY PACKER FOR 12 PACKS + HEAT TUNNEL, HT 74 DE - OUTFEED CONVEYOR (MANUAL PALLETIZING) - OPTIONAL = 2X SS SUGAR DISSOLVING TANKS - OPTIONAL = 2X SS STORAGE BUFFER TANKS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-semi-automatic cake cutting machine \r\nfor cutting of cake in 4-border-pan, pansize max. 640 x 440 mm\r\nthe cutting distance is adjustable, cake height max. 5 cm\r\ncutting in 2 steps\r\n(1st step => cross-cut, 2nd step => longitudinal-cut) \r\nunused knifes can be flapped away SEMI-AUTOMATIC CAKE CUTTING MACHINE \R\NFOR CUTTING OF CAKE IN 4-BORDER-PAN, PANSIZE MAX. 640 X 440 MM\R\NTHE CUTTING DISTANCE IS ADJUSTABLE, CAKE HEIGHT MAX. 5 CM\R\NCUTTING IN 2 STEPS\R\N(1ST STEP => CROSS-CUT, 2ND STEP => LONGITUDINAL-CUT) \R\NUNUSED KNIFES CAN BE FLAPPED AWAY
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-automatic sleeving machine krones sleevematic m2, 30.000 bph, year 2008
  
this krones sleevematic is an inline machine for shrink sleeves, built in 2008. it has been running only approximately 600 hours and is excellent condition. last major maintenance has been done prior to the machines stop and regular cleanings, inspections and lubrications are still performed. it works on one way and returnable glass bottles. it is currently installed and connected – power up test can be performed. it is available immediately and due to the very low running hours and regular maintenance it is in excellent condition. the delivery includes a sleeving machine, shrink tunnel, bottle dryer and control cabinets with siemens simatic plc
  
make: krones
type: sleevematic m 2
manufacturing year 2008
capacity: up to 30.000 bph
bottle size used: 355 ml glass
running hours: 600 hrs approx.
shrink tunnel 9 sections
type/serial: k-795-144
electricity: 400 v/ 50 hz or 460 v / 60 hz   AUTOMATIC SLEEVING MACHINE KRONES SLEEVEMATIC M2, 30.000 BPH, YEAR 2008 THIS KRONES SLEEVEMATIC IS AN INLINE MACHINE FOR SHRINK SLEEVES, BUILT IN 2008. IT HAS BEEN RUNNING ONLY APPROXIMATELY 600 HOURS AND IS EXCELLENT CONDITION. LAST MAJOR MAINTENANCE HAS BEEN DONE PRIOR TO THE MACHINES STOP AND REGULAR CLEANINGS, INSPECTIONS AND LUBRICATIONS ARE STILL PERFORMED. IT WORKS ON ONE WAY AND RETURNABLE GLASS BOTTLES. IT IS CURRENTLY INSTALLED AND CONNECTED – POWER UP TEST CAN BE PERFORMED. IT IS AVAILABLE IMMEDIATELY AND DUE TO THE VERY LOW RUNNING HOURS AND REGULAR MAINTENANCE IT IS IN EXCELLENT CONDITION. THE DELIVERY INCLUDES A SLEEVING MACHINE, SHRINK TUNNEL, BOTTLE DRYER AND CONTROL CABINETS WITH SIEMENS SIMATIC PLC MAKE: KRONES TYPE: SLEEVEMATIC M 2 MANUFACTURING YEAR 2008 CAPACITY: UP TO 30.000 BPH BOTTLE SIZE USED: 355 ML GLASS RUNNING HOURS: 600 HRS APPROX. SHRINK TUNNEL 9 SECTIONS TYPE/SERIAL: K-795-144 ELECTRICITY: 400 V/ 50 HZ OR 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-with hardened steel cone grinder, plastic housing\r\nspeed​​: 330 rpm, continuously adjustable from coarse to fine\r\ncapacity: flakes 250 g / min., finely grinding about 220 g / min.\r\nall cereals and oilseeds, dry herbs and spices:\r\n WITH HARDENED STEEL CONE GRINDER, PLASTIC HOUSING\R\NSPEED​​: 330 RPM, CONTINUOUSLY ADJUSTABLE FROM COARSE TO FINE\R\NCAPACITY: FLAKES 250 G / MIN., FINELY GRINDING ABOUT 220 G / MIN.\R\NALL CEREALS AND OILSEEDS, DRY HERBS AND SPICES:\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-dewatering station with membrane filter press for kieselguhr sludge
 
this complete dewatering station was designed by limburg for kieselguhr waste dewatering in to semidry cakes for easy waste disposal. the process is suitable also for dewatering other type of sludges. actual dewatering is made with latham side bar membrane filter press which reaches over 50 % dry (by weight) content of waste cake, inlet sludge being between 10 and 20 % dry content filter press is equipped with an automatic cloth washing system and an automatic cake discharge. shaker bars for discharge and plate opening and closing functions are hydraulically operated (limburg cake release control system). cloth washing is made in cycles and during the wash cycle, wash arm will individually wash one chamber at a time. process includes a sludge tank with agitation, sludge and water pumps, filtrate water tank with pump, filter press with auxiliaries, supporting structures and control cabinet with siemens simatic s 7-400 plc and siemens op 7 display. equipment was delivered in year 2000 and it is still installed and in good operational condition.
 
technical data:
made by: limburg – latham
made in year: 2000
inlet sludge dry content: 10 – 20%
capacity: max 3600 kg dry product / 24 hours
cake dry content: > 50% by weight
filtrate dry solid content: < 2 % by weight
latham filter press: side bar membrane 630
total filter area: 6.9 m2
total chamber volume: 99.8 dm3
plate size: 630 mm
working pressure: 7 barg
number of chambers: 12 (expandable to 15)
plate transport: automatic, multiple cake discharge
membrane filtration pump: 159 litres / min
sludge tank: 6 m3, aisi 316l
sludge tank agitator: 0.75 kw, 80 rpm, blade 660 mm
sludge pump capacity: 511 litres / min
filtrate tank: 1.5 m3, aisi 316l   DEWATERING STATION WITH MEMBRANE FILTER PRESS FOR KIESELGUHR SLUDGE THIS COMPLETE DEWATERING STATION WAS DESIGNED BY LIMBURG FOR KIESELGUHR WASTE DEWATERING IN TO SEMIDRY CAKES FOR EASY WASTE DISPOSAL. THE PROCESS IS SUITABLE ALSO FOR DEWATERING OTHER TYPE OF SLUDGES. ACTUAL DEWATERING IS MADE WITH LATHAM SIDE BAR MEMBRANE FILTER PRESS WHICH REACHES OVER 50 % DRY (BY WEIGHT) CONTENT OF WASTE CAKE, INLET SLUDGE BEING BETWEEN 10 AND 20 % DRY CONTENT FILTER PRESS IS EQUIPPED WITH AN AUTOMATIC CLOTH WASHING SYSTEM AND AN AUTOMATIC CAKE DISCHARGE. SHAKER BARS FOR DISCHARGE AND PLATE OPENING AND CLOSING FUNCTIONS ARE HYDRAULICALLY OPERATED (LIMBURG CAKE RELEASE CONTROL SYSTEM). CLOTH WASHING IS MADE IN CYCLES AND DURING THE WASH CYCLE, WASH ARM WILL INDIVIDUALLY WASH ONE CHAMBER AT A TIME. PROCESS INCLUDES A SLUDGE TANK WITH AGITATION, SLUDGE AND WATER PUMPS, FILTRATE WATER TANK WITH PUMP, FILTER PRESS WITH AUXILIARIES, SUPPORTING STRUCTURES AND CONTROL CABINET WITH SIEMENS SIMATIC S 7-400 PLC AND SIEMENS OP 7 DISPLAY. EQUIPMENT WAS DELIVERED IN YEAR 2000 AND IT IS STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. TECHNICAL DATA: MADE BY: LIMBURG – LATHAM MADE IN YEAR: 2000 INLET SLUDGE DRY CONTENT: 10 – 20% CAPACITY: MAX 3600 KG DRY PRODUCT / 24 HOURS CAKE DRY CONTENT: > 50% BY WEIGHT FILTRATE DRY SOLID CONTENT: < 2 % BY WEIGHT LATHAM FILTER PRESS: SIDE BAR MEMBRANE 630 TOTAL FILTER AREA: 6.9 M2 TOTAL CHAMBER VOLUME: 99.8 DM3 PLATE SIZE: 630 MM WORKING PRESSURE: 7 BARG NUMBER OF CHAMBERS: 12 (EXPANDABLE TO 15) PLATE TRANSPORT: AUTOMATIC, MULTIPLE CAKE DISCHARGE MEMBRANE FILTRATION PUMP: 159 LITRES / MIN SLUDGE TANK: 6 M3, AISI 316L SLUDGE TANK AGITATOR: 0.75 KW, 80 RPM, BLADE 660 MM SLUDGE PUMP CAPACITY: 511 LITRES / MIN FILTRATE TANK: 1.5 M3, AISI 316L
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-type bmk - g - 1200, gas heated, \r\nlength layer cake 1200 mm\r\naccessories: 2 rollers, length 1200 x d 50 mm\r\n TYPE BMK - G - 1200, GAS HEATED, \R\NLENGTH LAYER CAKE 1200 MM\R\NACCESSORIES: 2 ROLLERS, LENGTH 1200 X D 50 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-gebr. aluminium circular saw make mountain schmidmodell velox. no.: 62219 built 1986sã¤geblatt-ã?350 mmgehrungsschnitt re.   li. vert 45 â°. swivel gear head for schrã¤gschnitt45 â° linksschnitt - ã?: 90 â° rund130 mm45 â° rund120 from mm45 â° gear head at 45 â° stellung105 mm90 â° flach200 x 80 mm45 â° flach130 x 80 mmsã¤geblattdrehzahl1400/2800 upmmotor380 v1, 5 / 1.8 kwauã?enmaã?e: breite800 mmtiefe900 mmhã¶he1500 mmgewicht ca. 213 kgmit: doppelspanneinrichtungrollbahnen total length 3800 mm  GEBR. ALUMINIUM CIRCULAR SAW MAKE MOUNTAIN SCHMIDMODELL VELOX. NO.: 62219 BUILT 1986S&ATILDE;&CURREN;GEBLATT-&ATILDE;?350 MMGEHRUNGSSCHNITT RE. LI. VERT 45 &ACIRC;&DEG;. SWIVEL GEAR HEAD FOR SCHR&ATILDE;&CURREN;GSCHNITT45 &ACIRC;&DEG; LINKSSCHNITT - &ATILDE;?: 90 &ACIRC;&DEG; RUND130 MM45 &ACIRC;&DEG; RUND120 FROM MM45 &ACIRC;&DEG; GEAR HEAD AT 45 &ACIRC;&DEG; STELLUNG105 MM90 &ACIRC;&DEG; FLACH200 X 80 MM45 &ACIRC;&DEG; FLACH130 X 80 MMS&ATILDE;&CURREN;GEBLATTDREHZAHL1400/2800 UPMMOTOR380 V1, 5 / 1.8 KWAU&ATILDE;?ENMA&ATILDE;?E: BREITE800 MMTIEFE900 MMH&ATILDE;&PARA;HE1500 MMGEWICHT CA. 213 KGMIT: DOPPELSPANNEINRICHTUNGROLLBAHNEN TOTAL LENGTH 3800 MM
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Precio: 34.500 EU€
Ubicación: Land-plasma cutter ajan shp 260a is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. with these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. condition of the equipment good. PLASMA CUTTER AJAN SHP 260A IS A NUMERICALLY CONTROLLED OXYGEN SHEET CUTTING DEVICE, USING ORIGINAL CUTTING TOOLS MOUNTED ON IT, AND CAN BE GAS AND PLASMA TOOLS. WITH THESE TOOLS YOU CAN MAKE STRAIGHT CUTS AND LINEAR CUTS, ACCORDING TO PROGRAMMED CUTTING PROGRAMS OR BY MANUALLY CONTROLLING THE CUTTING PATH. CONDITION OF THE EQUIPMENT GOOD.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-gebr. universal circular grinding machine make knuth
	model multigrind. no.: 155277 year of 2012

max grinding diameter 200 mm
	max workpiece length 500 mm
	wheel 200 x 20 x 75 mm
	speed work headstock 110, 200, 300 rpm
	grinding spindle speed 2500 rpm
	work headstock swivel â± 90 â°
	grinding spindle stock swiveling â± 90 â°
	table swivel range + 45 â° - 30 â°
	longitudinal feed hydr.		0.01-6 m / min
	tailstock taper mk 2
	total power consumption 2.5 kw
	external dimensions:
	width 1600 mm
		depth 1350 mm
		height 1400 mm
	weight approx.		1300 kg
	with:
	coolant system
		extraction device
		internal grinding device
		machine lamp
		3 - jaw chuck 100 mm ã?
		vise
		tool sharpener
 GEBR. UNIVERSAL CIRCULAR GRINDING MACHINE MAKE KNUTH MODEL MULTIGRIND. NO.: 155277 YEAR OF 2012 MAX GRINDING DIAMETER 200 MM MAX WORKPIECE LENGTH 500 MM WHEEL 200 X 20 X 75 MM SPEED WORK HEADSTOCK 110, 200, 300 RPM GRINDING SPINDLE SPEED 2500 RPM WORK HEADSTOCK SWIVEL &ACIRC;&PLUSMN; 90 &ACIRC;&DEG; GRINDING SPINDLE STOCK SWIVELING &ACIRC;&PLUSMN; 90 &ACIRC;&DEG; TABLE SWIVEL RANGE + 45 &ACIRC;&DEG; - 30 &ACIRC;&DEG; LONGITUDINAL FEED HYDR. 0.01-6 M / MIN TAILSTOCK TAPER MK 2 TOTAL POWER CONSUMPTION 2.5 KW EXTERNAL DIMENSIONS: WIDTH 1600 MM DEPTH 1350 MM HEIGHT 1400 MM WEIGHT APPROX. 1300 KG WITH: COOLANT SYSTEM EXTRACTION DEVICE INTERNAL GRINDING DEVICE MACHINE LAMP 3 - JAW CHUCK 100 MM &ATILDE;? VISE TOOL SHARPENER
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Precio: 1.900 €
Ubicación: Land-NL Netherlands, 4731T Oudenbosch
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-control heidenhain... tnc 530
spindle diameter... 130mm
x axis... 10000mm
y axis... 3000mm
spindle speed... 10-3000.
axis w... 730mm
axis v... 600mm
internal coolant... 20 bar
iso 50
power of main engine... 37/56 kw
l x w x h... 12000 x 7640 x 5570mm
the weight of the machine... 73000kg

cnc rotary table with cross bearing, maximum plate 2000 x 2400 mm, v-axis feed 2000 mm, 2 engines
measurement of x -, y -, z - and v-axis with heidenhain rulers
measurement of the b-axis with the heidenhain encoder
chip conveyor
heidenhain ts 640 probe
universal milling head with indexing 2.5 st
take up mechanically to the milling head 
automatic lubrication system
cab extension 1300 mm / 550 mm
ce certificate

in very good condition, possible to try out under power.   CONTROL HEIDENHAIN... TNC 530 SPINDLE DIAMETER... 130MM X AXIS... 10000MM Y AXIS... 3000MM SPINDLE SPEED... 10-3000. AXIS W... 730MM AXIS V... 600MM INTERNAL COOLANT... 20 BAR ISO 50 POWER OF MAIN ENGINE... 37/56 KW L X W X H... 12000 X 7640 X 5570MM THE WEIGHT OF THE MACHINE... 73000KG CNC ROTARY TABLE WITH CROSS BEARING, MAXIMUM PLATE 2000 X 2400 MM, V-AXIS FEED 2000 MM, 2 ENGINES MEASUREMENT OF X -, Y -, Z - AND V-AXIS WITH HEIDENHAIN RULERS MEASUREMENT OF THE B-AXIS WITH THE HEIDENHAIN ENCODER CHIP CONVEYOR HEIDENHAIN TS 640 PROBE UNIVERSAL MILLING HEAD WITH INDEXING 2.5 ST TAKE UP MECHANICALLY TO THE MILLING HEAD AUTOMATIC LUBRICATION SYSTEM CAB EXTENSION 1300 MM / 550 MM CE CERTIFICATE IN VERY GOOD CONDITION, POSSIBLE TO TRY OUT UNDER POWER.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Precio: 300 €
Ubicación: Land-NL Netherlands, 4731T Oudenbosch
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 8.925 €
Ubicación: Land-suction sweeper
make: pietsch k1500
year: 1997
hours of operation: 2346
kilometers: 15403
engine: vw industrial diesel
2 front plate brushes

low mileage since the machine only in the cleaning of the plant was used. SUCTION SWEEPER MAKE: PIETSCH K1500 YEAR: 1997 HOURS OF OPERATION: 2346 KILOMETERS: 15403 ENGINE: VW INDUSTRIAL DIESEL 2 FRONT PLATE BRUSHES LOW MILEAGE SINCE THE MACHINE ONLY IN THE CLEANING OF THE PLANT WAS USED.
Vendedor: Bührer GmbH
Año de construcción: usado
Precio: 850 €
Ubicación: Land-2.000a abb sace e2 breaker 2.000A ABB SACE E2 BREAKER
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 190.000 €
Ubicación: Land-type of machine cnc turning and milling center make gildemeister type ctx gamma 2000 tc year 2009 cnc control type storage location france country of origin germany delivery after agreement cargo base free truck of verladem technical details
swing 700 mm turning diameter 600 mm turning length 1300 mm spindle speeds 500 rpm spindle bore 102 mm control siemens 840 dsl shop turn power 52 kw total power demand 70 kw machine weight 18.5 tons of space approx. 7 x 3 x 1.8 m lot zub ehã¶r, bezel
 tools capto c6 fold magazine 36
 c-axis and b-axis + y axis simultaneous
 milling spindle with 36 compartment capto halter system and 12000 rpm lunette smw klu 220 12 to 101 mm
 high pressure pump 20 bars with paper band filter
 spaenefoerderere TYPE OF MACHINE CNC TURNING AND MILLING CENTER MAKE GILDEMEISTER TYPE CTX GAMMA 2000 TC YEAR 2009 CNC CONTROL TYPE STORAGE LOCATION FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY AFTER AGREEMENT CARGO BASE FREE TRUCK OF VERLADEM TECHNICAL DETAILS SWING 700 MM TURNING DIAMETER 600 MM TURNING LENGTH 1300 MM SPINDLE SPEEDS 500 RPM SPINDLE BORE 102 MM CONTROL SIEMENS 840 DSL SHOP TURN POWER 52 KW TOTAL POWER DEMAND 70 KW MACHINE WEIGHT 18.5 TONS OF SPACE APPROX. 7 X 3 X 1.8 M LOT ZUB EH&ATILDE;&PARA;R, BEZEL TOOLS CAPTO C6 FOLD MAGAZINE 36 C-AXIS AND B-AXIS + Y AXIS SIMULTANEOUS MILLING SPINDLE WITH 36 COMPARTMENT CAPTO HALTER SYSTEM AND 12000 RPM LUNETTE SMW KLU 220 12 TO 101 MM HIGH PRESSURE PUMP 20 BARS WITH PAPER BAND FILTER SPAENEFOERDERERE
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-pressure: 50 t<br/>chamfer lenght: 2550 mm<br/><br/><br/><br/><br/> PRESSURE: 50 T
CHAMFER LENGHT: 2550 MM




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-machine type machining center - vertical make mori seiki type nvx 5100 ii 5 axis year 2013 control type cnc storage france country of origin japan delivery immediately cargo base ex work technical details

travel: x 1050 y 530 z 510 mm control: msx 853 tool changer: 40 x with bt 40 y route 530 mm x way 1050 mm z-way 510 mm control msx 853 table size 1350 x 600 mm speed range 12000 rpm tool holder bt 40 - milling spindle 15/11 kw who kzeugwechsler - places: 40 stations tool change time 1 sec feed range 30 mm / min rapid traverse - longitudinal/transverse/vertical 30 m / min total power consumption 35 kw machine weight approx. 7200 kg space requirement approx. 3800 x 2600 x 2700 mm complete machine documentation kã¼hlmitteleinric ion electronic hand wheel lubrication rs 232 data interface high berabeitungzentrum
 with fanuc mori msx 853 ikz hoch druck through spindle 15 bars
 spaenefoerdrer
 40 specialist bt 40 magazine
 3500 spindle hours
 4/5-axis dividing head MACHINE TYPE MACHINING CENTER - VERTICAL MAKE MORI SEIKI TYPE NVX 5100 II 5 AXIS YEAR 2013 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY IMMEDIATELY CARGO BASE EX WORK TECHNICAL DETAILS TRAVEL: X 1050 Y 530 Z 510 MM CONTROL: MSX 853 TOOL CHANGER: 40 X WITH BT 40 Y ROUTE 530 MM X WAY 1050 MM Z-WAY 510 MM CONTROL MSX 853 TABLE SIZE 1350 X 600 MM SPEED RANGE 12000 RPM TOOL HOLDER BT 40 - MILLING SPINDLE 15/11 KW WHO KZEUGWECHSLER - PLACES: 40 STATIONS TOOL CHANGE TIME 1 SEC FEED RANGE 30 MM / MIN RAPID TRAVERSE - LONGITUDINAL/TRANSVERSE/VERTICAL 30 M / MIN TOTAL POWER CONSUMPTION 35 KW MACHINE WEIGHT APPROX. 7200 KG SPACE REQUIREMENT APPROX. 3800 X 2600 X 2700 MM COMPLETE MACHINE DOCUMENTATION K&ATILDE;&FRAC14;HLMITTELEINRIC ION ELECTRONIC HAND WHEEL LUBRICATION RS 232 DATA INTERFACE HIGH BERABEITUNGZENTRUM WITH FANUC MORI MSX 853 IKZ HOCH DRUCK THROUGH SPINDLE 15 BARS SPAENEFOERDRER 40 SPECIALIST BT 40 MAGAZINE 3500 SPINDLE HOURS 4/5-AXIS DIVIDING HEAD
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-pressure: 300 t<br/>chamfer lenght: 6050 mm<br/>control: cybelec modeva 10s <br/>total power requirement: 38 kw<br/>weight of the machine ca.: 33000 kg<br/><br/><br/><br/><br/> PRESSURE: 300 T
CHAMFER LENGHT: 6050 MM
CONTROL: CYBELEC MODEVA 10S
TOTAL POWER REQUIREMENT: 38 KW
WEIGHT OF THE MACHINE CA.: 33000 KG




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-it is a used fortuna head machine km 4 rows for sale. the machine is in state of the bakery, not cleaned.
to overtake or for parts.

price on request.  IT IS A USED FORTUNA HEAD MACHINE KM 4 ROWS FOR SALE. THE MACHINE IS IN STATE OF THE BAKERY, NOT CLEANED. TO OVERTAKE OR FOR PARTS. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>chamfer lenght: 3050 mm<br/>control: cybelec modeva 10s <br/><br/><br/><br/><br/> PRESSURE: 150 T
CHAMFER LENGHT: 3050 MM
CONTROL: CYBELEC MODEVA 10S




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Precio: 450 €
Ubicación: Land-it is a used wabäma bread gate type signa 460.10 (year 2000) for sale. the machine is in the state of the bakery and functional.
a video can be sent on request.  IT IS A USED WABäMA BREAD GATE TYPE SIGNA 460.10 (YEAR 2000) FOR SALE. THE MACHINE IS IN THE STATE OF THE BAKERY AND FUNCTIONAL. A VIDEO CAN BE SENT ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 26.900 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 3200 x 2800 x 3000 mm<br/>description: haas vm-2 vertical machining centre<br> - serial no.: 1092502<br> - read off spindle hours: 1700<br> - travel (x/y/z): 762/508/508 mm<br> - thurst (x/y/z): approx. 18/24 kn<br> - rapids (x/y/z): up to 18 m/min<br> - spindle speed: up to 12.000 rpm<br> - table dimensions: 914 x 457 mm<br> - with t-slots in both x and y directions<br> - max. table load: 1361 kg<br> - taper: sk 40<br> - 24-fold tool changer<br> - max. tool diameter: 76 mm<br> - max. tool length: 279 mm<br> - tool to tool/chip to chip: 2,8 respectively 3,6 sec<br> - with automatic chip conveyor system<br> - with haas cnc control<br> - comes with haas tr 160 2 axis turn and swivel table for full fourth and fifth axis operations (already dismantled according to pictures)<br> - comes with renishaw probe as well as tool measuring device<br> - attention: only wax has been processed on this machine<br> - attention: pick up has to take place on 17 april 2019 WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 3200 X 2800 X 3000 MM
DESCRIPTION: HAAS VM-2 VERTICAL MACHINING CENTRE
- SERIAL NO.: 1092502
- READ OFF SPINDLE HOURS: 1700
- TRAVEL (X/Y/Z): 762/508/508 MM
- THURST (X/Y/Z): APPROX. 18/24 KN
- RAPIDS (X/Y/Z): UP TO 18 M/MIN
- SPINDLE SPEED: UP TO 12.000 RPM
- TABLE DIMENSIONS: 914 X 457 MM
- WITH T-SLOTS IN BOTH X AND Y DIRECTIONS
- MAX. TABLE LOAD: 1361 KG
- TAPER: SK 40
- 24-FOLD TOOL CHANGER
- MAX. TOOL DIAMETER: 76 MM
- MAX. TOOL LENGTH: 279 MM
- TOOL TO TOOL/CHIP TO CHIP: 2,8 RESPECTIVELY 3,6 SEC
- WITH AUTOMATIC CHIP CONVEYOR SYSTEM
- WITH HAAS CNC CONTROL
- COMES WITH HAAS TR 160 2 AXIS TURN AND SWIVEL TABLE FOR FULL FOURTH AND FIFTH AXIS OPERATIONS (ALREADY DISMANTLED ACCORDING TO PICTURES)
- COMES WITH RENISHAW PROBE AS WELL AS TOOL MEASURING DEVICE
- ATTENTION: ONLY WAX HAS BEEN PROCESSED ON THIS MACHINE
- ATTENTION: PICK UP HAS TO TAKE PLACE ON 17 APRIL 2019
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)