1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-technical data:
	
-pressure capacity 500 kn
	-hub infinitely adjustable 10-32 mm - stroke number 22-27 1/min
	-unloading 510 mm
	-height 350 mm
	-drive 400 v / 4 kw
	-punch for example up to 27 mm ã? in steel 14 mm
	-with sonderstanzsattel such as up to 39 mm ã? in steel 9.5 mm
	-for example up to 90 mm ã? in steel 4 mm
	-space requirement approx.	 b h 700 x 1700 x 1200 mm
	-weight approx.					1150 kg
	-with:-hydr. low grain search device
			-stop table with adjustable stops.
-foot switch
emergency stop button
-drawer cabinet with various hole punches with matrices
 TECHNICAL DATA: -PRESSURE CAPACITY 500 KN -HUB INFINITELY ADJUSTABLE 10-32 MM - STROKE NUMBER 22-27 1/MIN -UNLOADING 510 MM -HEIGHT 350 MM -DRIVE 400 V / 4 KW -PUNCH FOR EXAMPLE UP TO 27 MM Ã? IN STEEL 14 MM -WITH SONDERSTANZSATTEL SUCH AS UP TO 39 MM Ã? IN STEEL 9.5 MM -FOR EXAMPLE UP TO 90 MM Ã? IN STEEL 4 MM -SPACE REQUIREMENT APPROX. B H 700 X 1700 X 1200 MM -WEIGHT APPROX. 1150 KG -WITH:-HYDR. LOW GRAIN SEARCH DEVICE -STOP TABLE WITH ADJUSTABLE STOPS. -FOOT SWITCH EMERGENCY STOP BUTTON -DRAWER CABINET WITH VARIOUS HOLE PUNCHES WITH MATRICES
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; accessories: allrad, kabine, diesel, teleskoparm (bautechnikeinsatz), geschwindigkeit:40, hubhöhe:7.1; maximum lift capacity [kg]: 4400 ; ACCESSORIES: ALLRAD, KABINE, DIESEL, TELESKOPARM (BAUTECHNIKEINSATZ), GESCHWINDIGKEIT:40, HUBHöHE:7.1; MAXIMUM LIFT CAPACITY [KG]: 4400
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-technical data:

-mot 3. driven roller - hydr. delivery of the two bottom rollers + the two setup roles / lead role
-the machine is 240 n / mmâ² strength of the material / yield point horizontally or vertically can be used-
/ re max torque 25
-bending performance: - flat stock - upright 80 x 20 mm ã? 800 mm - flat 140 x 30 mm ã? 700 mm
-hea 120 ã? 1000 mm
-tubular 88.9 x 3, 2 ã? 1000 mm
-bending speed 0-5 m / min
-roll diameter 290 mm
-shaft diameter 90 mm
-drive 400 v / 9,2 kw
-with:-analogue actual value indicators
-standart bending set for flat and angle material - div. tube roller sets 28; 48.3; 
	-weight approx.						2000 kg
	-space requirement approx.		            b h 1600 x 1300 x 1400 mm    
 TECHNICAL DATA: -MOT 3. DRIVEN ROLLER - HYDR. DELIVERY OF THE TWO BOTTOM ROLLERS + THE TWO SETUP ROLES / LEAD ROLE -THE MACHINE IS 240 N / MM² STRENGTH OF THE MATERIAL / YIELD POINT HORIZONTALLY OR VERTICALLY CAN BE USED- / RE MAX TORQUE 25 -BENDING PERFORMANCE: - FLAT STOCK - UPRIGHT 80 X 20 MM � 800 MM - FLAT 140 X 30 MM � 700 MM -HEA 120 � 1000 MM -TUBULAR 88.9 X 3, 2 � 1000 MM -BENDING SPEED 0-5 M / MIN -ROLL DIAMETER 290 MM -SHAFT DIAMETER 90 MM -DRIVE 400 V / 9,2 KW -WITH:-ANALOGUE ACTUAL VALUE INDICATORS -STANDART BENDING SET FOR FLAT AND ANGLE MATERIAL - DIV. TUBE ROLLER SETS 28; 48.3; -WEIGHT APPROX. 2000 KG -SPACE REQUIREMENT APPROX. B H 1600 X 1300 X 1400 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 26.800 €
Ubicación: Land-; rear tyres remaining: 70; front tyres remaining: 70; accessories: leistung (brief):73, bereifung (v):15.5-24, bereifung (h):15.5-24, allrad, kabine, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 3000 ; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 70; ACCESSORIES: LEISTUNG (BRIEF):73, BEREIFUNG (V):15.5-24, BEREIFUNG (H):15.5-24, ALLRAD, KABINE, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 3000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-cnc fanuc... fanuc 21i
clamping table surface... 1300 x 600mm
x axis... 1016mm
y axis... 610mm
z axis... 660mm
spindle speed... 0-10000 rpm
operated axles... 3
iso 40
maximum workpiece weight... 700kg
l x w x h... 3080 x 2700 x 2940 mm
the weight of the machine... 5 500kg

in very good condition, possible to try out under power. CNC FANUC... FANUC 21I CLAMPING TABLE SURFACE... 1300 X 600MM X AXIS... 1016MM Y AXIS... 610MM Z AXIS... 660MM SPINDLE SPEED... 0-10000 RPM OPERATED AXLES... 3 ISO 40 MAXIMUM WORKPIECE WEIGHT... 700KG L X W X H... 3080 X 2700 X 2940 MM THE WEIGHT OF THE MACHINE... 5 500KG IN VERY GOOD CONDITION, POSSIBLE TO TRY OUT UNDER POWER.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Precio: 25.800 €
Ubicación: Land-; rear tyres remaining: 60; front tyres remaining: 60; accessories: leistung (brief):75, bereifung (v):405/70-24, bereifung (h):405/70-24, allrad, kabine, diesel, teleskoparm (längenverstellung) ; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; ACCESSORIES: LEISTUNG (BRIEF):75, BEREIFUNG (V):405/70-24, BEREIFUNG (H):405/70-24, ALLRAD, KABINE, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG)
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 6.200 €
Ubicación: Land-maximum punching force: 300 kn
inclusive range of punches and matrices
other specifications on request MAXIMUM PUNCHING FORCE: 300 KN INCLUSIVE RANGE OF PUNCHES AND MATRICES OTHER SPECIFICATIONS ON REQUEST
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 48.700 €
Ubicación: Land-; power [ps]: 230; front tyre size: 30.5l32; rear tyre size: 16.5/85-24; rear tyres remaining: 80; front tyres remaining: 60; accessories: kornkopf, betriebsstunden:2220, motorhersteller:john deere, schüttleranzahl (6 stck.), bordcomputer / monitor, durchsatzkontrolle, häcksler, haspelhorizontalverstellung, hydrostatischer antrieb, kabine, reversiereinrichtung, schüttler, verlustmessung; working width [cm]: 550 ; POWER [PS]: 230; FRONT TYRE SIZE: 30.5L32; REAR TYRE SIZE: 16.5/85-24; REAR TYRES REMAINING: 80; FRONT TYRES REMAINING: 60; ACCESSORIES: KORNKOPF, BETRIEBSSTUNDEN:2220, MOTORHERSTELLER:JOHN DEERE, SCHüTTLERANZAHL (6 STCK.), BORDCOMPUTER / MONITOR, DURCHSATZKONTROLLE, HäCKSLER, HASPELHORIZONTALVERSTELLUNG, HYDROSTATISCHER ANTRIEB, KABINE, REVERSIEREINRICHTUNG, SCHüTTLER, VERLUSTMESSUNG; WORKING WIDTH [CM]: 550
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-technical data:

-bandsaw half machine with microprocessor control and manual function
-band saw blade size 4500 x 34.0 x 1.1 mm
-infinitely variable n 15 to 100 m/min cutting speed
-hydr. material clamping stock
-maximum clamping possibility 455 mm - mitre adjustable left to 60 â° right up to 45 â° - cutting capacity at 90 â° round 330 mm
	-square 320 mm
	-flat 450 x 320 mm
	-cutting capacity at 45 â° li + re around 320 mm
	-45 â° li + re flat 300 x 300 mm
	-60 â° li + re flat 200 x 200 mm
-drive 400 v / 4 kw
-coolant system - spã¤nerã¤umbã¼rste - original removal roller 3000 mm
-weight approx.					  	1200 kg - space requirement approx.	                 b h 1800 x 1950 x h 2000 mm
 TECHNICAL DATA: -BANDSAW HALF MACHINE WITH MICROPROCESSOR CONTROL AND MANUAL FUNCTION -BAND SAW BLADE SIZE 4500 X 34.0 X 1.1 MM -INFINITELY VARIABLE N 15 TO 100 M/MIN CUTTING SPEED -HYDR. MATERIAL CLAMPING STOCK -MAXIMUM CLAMPING POSSIBILITY 455 MM - MITRE ADJUSTABLE LEFT TO 60 ° RIGHT UP TO 45 ° - CUTTING CAPACITY AT 90 ° ROUND 330 MM -SQUARE 320 MM -FLAT 450 X 320 MM -CUTTING CAPACITY AT 45 ° LI + RE AROUND 320 MM -45 ° LI + RE FLAT 300 X 300 MM -60 ° LI + RE FLAT 200 X 200 MM -DRIVE 400 V / 4 KW -COOLANT SYSTEM - SPäNERäUMBüRSTE - ORIGINAL REMOVAL ROLLER 3000 MM -WEIGHT APPROX. 1200 KG - SPACE REQUIREMENT APPROX. B H 1800 X 1950 X H 2000 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-; power [ps]: 336; front tyre size: 480/80-26; rear tyre size: 650/65-32; accessories: spreuverteiler, betriebsstunden:1653, motorhersteller:john deere, schüttleranzahl (6 stck.), bordcomputer / monitor, beleuchtung/warntafeln, durchsatzkontrolle, häcksler, hangausgleich, haspelhorizontalverstellung, hydrostatischer antrieb, kabine, reversi; working width [cm]: 660 ; POWER [PS]: 336; FRONT TYRE SIZE: 480/80-26; REAR TYRE SIZE: 650/65-32; ACCESSORIES: SPREUVERTEILER, BETRIEBSSTUNDEN:1653, MOTORHERSTELLER:JOHN DEERE, SCHüTTLERANZAHL (6 STCK.), BORDCOMPUTER / MONITOR, BELEUCHTUNG/WARNTAFELN, DURCHSATZKONTROLLE, HäCKSLER, HANGAUSGLEICH, HASPELHORIZONTALVERSTELLUNG, HYDROSTATISCHER ANTRIEB, KABINE, REVERSI; WORKING WIDTH [CM]: 660
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-offered is a new, original packed fans magnetic pump for developing machines for fuji, konica, ilford, etc.
model: md-6l
voltage: 115 volt OFFERED IS A NEW, ORIGINAL PACKED FANS MAGNETIC PUMP FOR DEVELOPING MACHINES FOR FUJI, KONICA, ILFORD, ETC. MODEL: MD-6L VOLTAGE: 115 VOLT
Vendedor: Herr Helmut Schwarz
Año de construcción: usado
Ubicación: Land-technical specification:  <br/>- working width:    500 mm<br/>- max. sheet thickness (400 n/mm2):      6 mm<br/>- number of leveller rolls:     21  <br/>- diameter of leveller rolls:     50 mm<br/>- levelling speed (min.):      0 m/min<br/>- levelling speed (max.):     30 m/min<br/>- adjustment of leveller rolls:     55 kw<br/>electrical specifications:  <br/>- mains voltage:    480 v<br/>- mains frequency:     60 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:   6870 mm<br/>- space requirements -front/back-:   3400 mm<br/>- total height:   2040 mm<br/>- total weight approx.:  16450 kg<br/>tandem line consisting of 2 levellers<br/><br/><br/><br/><br/> TECHNICAL SPECIFICATION:
- WORKING WIDTH: 500 MM
- MAX. SHEET THICKNESS (400 N/MM2): 6 MM
- NUMBER OF LEVELLER ROLLS: 21
- DIAMETER OF LEVELLER ROLLS: 50 MM
- LEVELLING SPEED (MIN.): 0 M/MIN
- LEVELLING SPEED (MAX.): 30 M/MIN
- ADJUSTMENT OF LEVELLER ROLLS: 55 KW
ELECTRICAL SPECIFICATIONS:
- MAINS VOLTAGE: 480 V
- MAINS FREQUENCY: 60 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 6870 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 3400 MM
- TOTAL HEIGHT: 2040 MM
- TOTAL WEIGHT APPROX.: 16450 KG
TANDEM LINE CONSISTING OF 2 LEVELLERS




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-2 x cutting mill alpine augsburg: rotor dimensions: 40 x 100 mm open rotor, 5 rotor blade & 3 stator, drive 45 kw. 

1 x cutting mill alpine augsburg: rotor dimensions: 40 x 63 mm open rotor, 5 rotor blade & 3 stator, drive 30 kw.

1 x cutting mill condux: rotor dimensions: 45 x 60 mm open rotor, 3 rotor blade & 2 statormesser bevel cut, drive 30 kw.

1 x ver recorded fine impact mill alpine augsburg upz 400: drive 37 kw 1 x zig-zag separator alpine augsburg: fan 8.5 kw  2 X CUTTING MILL ALPINE AUGSBURG: ROTOR DIMENSIONS: 40 X 100 MM OPEN ROTOR, 5 ROTOR BLADE & 3 STATOR, DRIVE 45 KW. 1 X CUTTING MILL ALPINE AUGSBURG: ROTOR DIMENSIONS: 40 X 63 MM OPEN ROTOR, 5 ROTOR BLADE & 3 STATOR, DRIVE 30 KW. 1 X CUTTING MILL CONDUX: ROTOR DIMENSIONS: 45 X 60 MM OPEN ROTOR, 3 ROTOR BLADE & 2 STATORMESSER BEVEL CUT, DRIVE 30 KW. 1 X VER RECORDED FINE IMPACT MILL ALPINE AUGSBURG UPZ 400: DRIVE 37 KW 1 X ZIG-ZAG SEPARATOR ALPINE AUGSBURG: FAN 8.5 KW
Vendedor: Herr Karl Neigert
Año de construcción: usado
Precio: 18.400 €
Ubicación: Land-: 160 to<br/>: 1.000 x 700 mm<br/>: 20 - 120 mm<br/>: 355 mm<br/>: 350/400 mm<br/>: 100 mm<br/>: 750 x 380 mm<br/>: 11 kw<br/>: 1.270 mm<br/>: 2.310 mm<br/>: 2.685 mm<br/>: 10.150 kg<br/>electro-pneumatic clutch-brake combination<br/>fix table <br/>manual stroke adjustment<br/>ram adjustment by ratchet <br/>single and continous stroke <br/>with work plate (re-planed)<br/><br/>does not comply with the current industrial safety regulations (amvo &, uvv)<br/><br/><br/><br/><br/>pressforce: 160 to<br/>table: 1.000 x 700 mm<br/>stroke: 20 - 120 mm<br/>throat depth: 355 mm<br/>daylight: 350/400 mm<br/>ram adjustment: 100 mm<br/>max. strokes: 50/30 1/min.<br/>ram:	750 x 380 mm<br/>clamping opening in ram: Ø 50 h8 x 85 mm<br/>ram hole: Ø 290 mm h7<br/>motor: 11 kw<br/>length: 1.270 mm<br/>width: 2.310 mm<br/>height: 2.685 mm<br/>weight: 10.150 kg<br/><br/><br/><br/> : 160 TO
: 1.000 X 700 MM
: 20 - 120 MM
: 355 MM
: 350/400 MM
: 100 MM
: 750 X 380 MM
: 11 KW
: 1.270 MM
: 2.310 MM
: 2.685 MM
: 10.150 KG
ELECTRO-PNEUMATIC CLUTCH-BRAKE COMBINATION
FIX TABLE
MANUAL STROKE ADJUSTMENT
RAM ADJUSTMENT BY RATCHET
SINGLE AND CONTINOUS STROKE
WITH WORK PLATE (RE-PLANED)

DOES NOT COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)




PRESSFORCE: 160 TO
TABLE: 1.000 X 700 MM
STROKE: 20 - 120 MM
THROAT DEPTH: 355 MM
DAYLIGHT: 350/400 MM
RAM ADJUSTMENT: 100 MM
MAX. STROKES: 50/30 1/MIN.
RAM: 750 X 380 MM
CLAMPING OPENING IN RAM: Ø 50 H8 X 85 MM
RAM HOLE: Ø 290 MM H7
MOTOR: 11 KW
LENGTH: 1.270 MM
WIDTH: 2.310 MM
HEIGHT: 2.685 MM
WEIGHT: 10.150 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-type: tr 7 d 200.6,0/5s-84 m â²
built in 2000
total baking area: 84 mâ²
required thermal power total ca. 504 kw
number of baking chambers: 7
each baking chamber baking surface: 12 mâ²
usable bandwidth: 2 m
exterior, back doors, input and output-
fronts, both sides, show - and maintenance-
doors made of stainless steel

equipment each baking chamber:
special-hinge-plate belt miwe spb with average
going flat baking surface without mesh printing
band load up to 50 kg / m â²
electro mechanical belt drive
back height inside: 200 mm

incl. thermal oil: supply temperature: 320 â° c
thermo-oil backraumtermperatur up to 300 â° c
(info: thermo-oil was 2013 replaced/renewed)
the heating and humidification is performed by separate
guess low pressure steam boiler
accessories: loos low pressure steam boiler with water softener

incl. miwe boiler central hkz
boiler max power. 350 kw
with elco burner for natural gas
without tank tank!
year 2000 (2013 electrically partly renewed)

incl. miwe docking station ads
for fermentation car size: 2, 0 x 0, 6 x 1, 95 m (no car)
including safety device
built in 2000

incl. miwe butler
bandwidth/m: 2.0
step length/m: 1.20
with plc
tipping for rolls
built in 2000
 TYPE: TR 7 D 200.6,0/5S-84 M &ACIRC;&SUP2; BUILT IN 2000 TOTAL BAKING AREA: 84 M&ACIRC;&SUP2; REQUIRED THERMAL POWER TOTAL CA. 504 KW NUMBER OF BAKING CHAMBERS: 7 EACH BAKING CHAMBER BAKING SURFACE: 12 M&ACIRC;&SUP2; USABLE BANDWIDTH: 2 M EXTERIOR, BACK DOORS, INPUT AND OUTPUT- FRONTS, BOTH SIDES, SHOW - AND MAINTENANCE- DOORS MADE OF STAINLESS STEEL EQUIPMENT EACH BAKING CHAMBER: SPECIAL-HINGE-PLATE BELT MIWE SPB WITH AVERAGE GOING FLAT BAKING SURFACE WITHOUT MESH PRINTING BAND LOAD UP TO 50 KG / M &ACIRC;&SUP2; ELECTRO MECHANICAL BELT DRIVE BACK HEIGHT INSIDE: 200 MM INCL. THERMAL OIL: SUPPLY TEMPERATURE: 320 &ACIRC;&DEG; C THERMO-OIL BACKRAUMTERMPERATUR UP TO 300 &ACIRC;&DEG; C (INFO: THERMO-OIL WAS 2013 REPLACED/RENEWED) THE HEATING AND HUMIDIFICATION IS PERFORMED BY SEPARATE GUESS LOW PRESSURE STEAM BOILER ACCESSORIES: LOOS LOW PRESSURE STEAM BOILER WITH WATER SOFTENER INCL. MIWE BOILER CENTRAL HKZ BOILER MAX POWER. 350 KW WITH ELCO BURNER FOR NATURAL GAS WITHOUT TANK TANK! YEAR 2000 (2013 ELECTRICALLY PARTLY RENEWED) INCL. MIWE DOCKING STATION ADS FOR FERMENTATION CAR SIZE: 2, 0 X 0, 6 X 1, 95 M (NO CAR) INCLUDING SAFETY DEVICE BUILT IN 2000 INCL. MIWE BUTLER BANDWIDTH/M: 2.0 STEP LENGTH/M: 1.20 WITH PLC TIPPING FOR ROLLS BUILT IN 2000
Vendedor: Backservice Gaux GmbH
Año de construcción: usado
Ubicación: Land-grinding diameter: 350 mm<br/>grinding length: 1500 mm<br/>centre height: 175 mm<br/>control:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>basis:<br/>kellenberger kel-varia ur175-1500<br/>(fotos von bereits gelieferter maschine mit<br/>spitzenweite 1000mm)<br/><br/>schleifkopf ur mit t1-t2-t3<br/><br/>grundausstattung:<br/><br/>-b-achse hochauflösend<br/>-marposs messeinrichtung zur werkzeugvermessung<br/>-schwenken um die scheibenkante<br/>-aktive längspositionierung<br/>-gap an t1 berührungslos<br/>-v-konstant<br/>-reitstock  mit handrückzug<br/>-wss mit konus mk5, optional mit adapter mk5/kurzkegel<br/><br/>folgende ausstattungen frei wählbar:<br/><br/>-schleifscheibendurchmesser t1<br/>-schleifscheibendurchmesser t2<br/>-innenschleifeinrichtung riemengetrieben oder<br/>-innenschleifeinrichtung mit hf spindel<br/>-durchmesser-messeinrichtung<br/>-hydraulischer pinolenrückzug<br/>-mikroverstellung am reitstock<br/>-werkstückspindelstock mit mk5 und kurzkegelaufnahme din 55026<br/>-cnc-gesteuerte c-achse in verbindung mit werkstückspindelstock s.o.<br/>-unrundschleifen<br/>-verstärkter werkstückspindelstock<br/>-spitzenerhöhung<br/><br/>weitere optionen auf anfrage möglich<br/><br/>es werden ausschließlich konkrete anfragen mit genauer<br/>ausstattungskonfiguration von anwendern bearbeitet<br/><br/><br/>mechanische Überholung:<br/><br/>-komplette maschine nach kellenberger messprotokoll überholt<br/>-neue servicefreundliche kabine<br/>-neulackierung<br/><br/>elektrische Überholung:<br/><br/>-neue moderne cnc-rundschleifmaschinen-steuerung<br/>-neu aufgebauter schaltschrank<br/>-neue antriebstechnik<br/>-austausch sämtlicher elektrischer leitungen berus druckschalter etc.<br/>-neue absolut-glasmaßstäbe in x- und z<br/>-neuer absolut drehgeber (bei-b-achse)<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> GRINDING DIAMETER: 350 MM
GRINDING LENGTH: 1500 MM
CENTRE HEIGHT: 175 MM
CONTROL:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
BASIS:
KELLENBERGER KEL-VARIA UR175-1500
(FOTOS VON BEREITS GELIEFERTER MASCHINE MIT
SPITZENWEITE 1000MM)

SCHLEIFKOPF UR MIT T1-T2-T3

GRUNDAUSSTATTUNG:

-B-ACHSE HOCHAUFLöSEND
-MARPOSS MESSEINRICHTUNG ZUR WERKZEUGVERMESSUNG
-SCHWENKEN UM DIE SCHEIBENKANTE
-AKTIVE LäNGSPOSITIONIERUNG
-GAP AN T1 BERüHRUNGSLOS
-V-KONSTANT
-REITSTOCK MIT HANDRüCKZUG
-WSS MIT KONUS MK5, OPTIONAL MIT ADAPTER MK5/KURZKEGEL

FOLGENDE AUSSTATTUNGEN FREI WäHLBAR:

-SCHLEIFSCHEIBENDURCHMESSER T1
-SCHLEIFSCHEIBENDURCHMESSER T2
-INNENSCHLEIFEINRICHTUNG RIEMENGETRIEBEN ODER
-INNENSCHLEIFEINRICHTUNG MIT HF SPINDEL
-DURCHMESSER-MESSEINRICHTUNG
-HYDRAULISCHER PINOLENRüCKZUG
-MIKROVERSTELLUNG AM REITSTOCK
-WERKSTüCKSPINDELSTOCK MIT MK5 UND KURZKEGELAUFNAHME DIN 55026
-CNC-GESTEUERTE C-ACHSE IN VERBINDUNG MIT WERKSTüCKSPINDELSTOCK S.O.
-UNRUNDSCHLEIFEN
-VERSTäRKTER WERKSTüCKSPINDELSTOCK
-SPITZENERHöHUNG

WEITERE OPTIONEN AUF ANFRAGE MöGLICH

ES WERDEN AUSSCHLIEßLICH KONKRETE ANFRAGEN MIT GENAUER
AUSSTATTUNGSKONFIGURATION VON ANWENDERN BEARBEITET


MECHANISCHE ÜBERHOLUNG:

-KOMPLETTE MASCHINE NACH KELLENBERGER MESSPROTOKOLL üBERHOLT
-NEUE SERVICEFREUNDLICHE KABINE
-NEULACKIERUNG

ELEKTRISCHE ÜBERHOLUNG:

-NEUE MODERNE CNC-RUNDSCHLEIFMASCHINEN-STEUERUNG
-NEU AUFGEBAUTER SCHALTSCHRANK
-NEUE ANTRIEBSTECHNIK
-AUSTAUSCH SäMTLICHER ELEKTRISCHER LEITUNGEN BERUS DRUCKSCHALTER ETC.
-NEUE ABSOLUT-GLASMAßSTäBE IN X- UND Z
-NEUER ABSOLUT DREHGEBER (BEI-B-ACHSE)










Vendedor: BEMA
Año de construcción: usado
Precio: 6.700 €
Ubicación: Land-gear hobber mikron type 102 (102.04) :

- right and helical wheels, max diameter : 120 [mm]
- max cutting length : 130 [mm]
- number of teeth : from 6 to 325
- feed : 7 from 0.05 to 0.6 [mm]
- milling rotation speeds : 10 from 140 - 1870 [rpm]
- pitch of the helix : 2 - 5000 [mm]
- angle of the pitch of the helix (left/right) : 0 - 90 [°]
- max module : 2
- size : 0.615 x 1 x 1.5 [m]
- weight : 620 [kg]

machine in nice condition, visible under power for inspection.

shipping in europe is possible.

more pictures and details on request.

prix vat excluded, ex works loading on truck included.
 GEAR HOBBER MIKRON TYPE 102 (102.04) : - RIGHT AND HELICAL WHEELS, MAX DIAMETER : 120 [MM] - MAX CUTTING LENGTH : 130 [MM] - NUMBER OF TEETH : FROM 6 TO 325 - FEED : 7 FROM 0.05 TO 0.6 [MM] - MILLING ROTATION SPEEDS : 10 FROM 140 - 1870 [RPM] - PITCH OF THE HELIX : 2 - 5000 [MM] - ANGLE OF THE PITCH OF THE HELIX (LEFT/RIGHT) : 0 - 90 [°] - MAX MODULE : 2 - SIZE : 0.615 X 1 X 1.5 [M] - WEIGHT : 620 [KG] MACHINE IN NICE CONDITION, VISIBLE UNDER POWER FOR INSPECTION. SHIPPING IN EUROPE IS POSSIBLE. MORE PICTURES AND DETAILS ON REQUEST. PRIX VAT EXCLUDED, EX WORKS LOADING ON TRUCK INCLUDED.
Vendedor: SARL Kraffter
Año de construcción: usado
Precio: used machinery auction RESALE 5.340 €
Ubicación: Land-weight approx.: 3600 kg<br/>dimensions (l x w x h) approx.: 2300 x 2500 x 2700 mm<br/>description: kondia b-640 machining centre<br> <br> operating hours approx. 7506,44 h<br> clamping table size 800 x 400 mm<br> degree of protection ip 65 p00 terminals<br> max. voltage 42 v<br> switching capacity 100 va<br> switching frequency 200 / min.<br> operating temperature -20° c - 120° c depending on type<br> lifetime 1.000.000 switching operations<br> contact open<br> connection by means of plug and external thread<br> max. pressure 300 bar<br> adjustment range 20 - 50 bar (+- 2)<br> operating mode switch<br> control siemens<br> <b>without machine vice and tool holders</b><br> <br> package 1: main machine 2100 x 2500 x 2700 mm, 3600 kg, package 2: euro pallet 2300 x 1000 x 600 mm, 350 kg WEIGHT APPROX.: 3600 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 2500 X 2700 MM
DESCRIPTION: KONDIA B-640 MACHINING CENTRE

OPERATING HOURS APPROX. 7506,44 H
CLAMPING TABLE SIZE 800 X 400 MM
DEGREE OF PROTECTION IP 65 P00 TERMINALS
MAX. VOLTAGE 42 V
SWITCHING CAPACITY 100 VA
SWITCHING FREQUENCY 200 / MIN.
OPERATING TEMPERATURE -20° C - 120° C DEPENDING ON TYPE
LIFETIME 1.000.000 SWITCHING OPERATIONS
CONTACT OPEN
CONNECTION BY MEANS OF PLUG AND EXTERNAL THREAD
MAX. PRESSURE 300 BAR
ADJUSTMENT RANGE 20 - 50 BAR (+- 2)
OPERATING MODE SWITCH
CONTROL SIEMENS
WITHOUT MACHINE VICE AND TOOL HOLDERS

PACKAGE 1: MAIN MACHINE 2100 X 2500 X 2700 MM, 3600 KG, PACKAGE 2: EURO PALLET 2300 X 1000 X 600 MM, 350 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--arburg allrounder centex 320 cd-500-225
-clamping force 50 t
-with walldorf-handling
-from model year 1998
-tie bar distance 32 x 32 screw diameter 35
-heating 9.4 kw
-control: dialogika bj 1998-updated mature, but only an expression
-universal range of application -ARBURG ALLROUNDER CENTEX 320 CD-500-225 -CLAMPING FORCE 50 T -WITH WALLDORF-HANDLING -FROM MODEL YEAR 1998 -TIE BAR DISTANCE 32 X 32 SCREW DIAMETER 35 -HEATING 9.4 KW -CONTROL: DIALOGIKA BJ 1998-UPDATED MATURE, BUT ONLY AN EXPRESSION -UNIVERSAL RANGE OF APPLICATION
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-weight approx.: 2400 kg<br/>dimensions (l x w x h) approx.: 3500 x 1500 x 1800 mm<br/>description: kellenberger 1000rj cylindrical grinder<br> <br> serial number 165 427, grinding wheel diameter 400 mm, width of grinding wheel 45 mm, bore 127 mm, max. grinding wheel diameter width of the grinding wheel 50 mm, number of grinding wheel turns 2, from 30 to 400 rpm, toratable 360 degrees, spindle bore 38 mm, spindle cone 5 mk, reistocikkonus 3 mk, largest inclination of the table +- 9°, speed of he table stepless from 0 bis 6 m/min, motor 380 volt, grinding spindle motor 3,5 ps, total power requirement 5,0 ps, with various accessories and grinding wheels<br> WEIGHT APPROX.: 2400 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 1500 X 1800 MM
DESCRIPTION: KELLENBERGER 1000RJ CYLINDRICAL GRINDER

SERIAL NUMBER 165 427, GRINDING WHEEL DIAMETER 400 MM, WIDTH OF GRINDING WHEEL 45 MM, BORE 127 MM, MAX. GRINDING WHEEL DIAMETER WIDTH OF THE GRINDING WHEEL 50 MM, NUMBER OF GRINDING WHEEL TURNS 2, FROM 30 TO 400 RPM, TORATABLE 360 DEGREES, SPINDLE BORE 38 MM, SPINDLE CONE 5 MK, REISTOCIKKONUS 3 MK, LARGEST INCLINATION OF THE TABLE +- 9°, SPEED OF HE TABLE STEPLESS FROM 0 BIS 6 M/MIN, MOTOR 380 VOLT, GRINDING SPINDLE MOTOR 3,5 PS, TOTAL POWER REQUIREMENT 5,0 PS, WITH VARIOUS ACCESSORIES AND GRINDING WHEELS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-crate unloading and loading system with abb industrial robots

automatic robot packaging system made by sasib in 1998. the system is used for loading bottles in crates with the maximum capacity of 80.000 bph. it includes six floor-mounted robots and a control unit. the robots are made by abb in 1998 and they are refurbished in 2010/2011. production was stopped about one year after this refurbishment and therefore abb robots are in good working order. abb irb 6400 robots have a 6-axis movement, a reach of 2.4 meters and maximum handling capacity of 200 kg. system includes complete conveyor systems and gripping tools for the robots.

system manufacturer: sasib s.p.a., italy
system model: robokombi deca 5-5t
serial number: ibh 005 1226
crate loading capacity: 80 000 bph
crate unloading capacity: 20 000 bph

robot manufacturer: abb robotics products ab, sweden
robot type: irb6400 m97a
version: irb6400/2.4-200
year of manufacture: 1998
number of robots 6 pcs
payload capacity up to 200 kg
serial number: 64-06736
voltage: 3 x 400 v, 50 – 60 hz
electric power: 7.2 kva
maximum reach: 2.4 m
manipulator weight: 2.050 kg
controller weight: 250 kg
axes: 6
axis velocities: 90 – 190 °/s, depending on axis
axis velocity resolution: approx. 0.01 °/s each axis   CRATE UNLOADING AND LOADING SYSTEM WITH ABB INDUSTRIAL ROBOTS AUTOMATIC ROBOT PACKAGING SYSTEM MADE BY SASIB IN 1998. THE SYSTEM IS USED FOR LOADING BOTTLES IN CRATES WITH THE MAXIMUM CAPACITY OF 80.000 BPH. IT INCLUDES SIX FLOOR-MOUNTED ROBOTS AND A CONTROL UNIT. THE ROBOTS ARE MADE BY ABB IN 1998 AND THEY ARE REFURBISHED IN 2010/2011. PRODUCTION WAS STOPPED ABOUT ONE YEAR AFTER THIS REFURBISHMENT AND THEREFORE ABB ROBOTS ARE IN GOOD WORKING ORDER. ABB IRB 6400 ROBOTS HAVE A 6-AXIS MOVEMENT, A REACH OF 2.4 METERS AND MAXIMUM HANDLING CAPACITY OF 200 KG. SYSTEM INCLUDES COMPLETE CONVEYOR SYSTEMS AND GRIPPING TOOLS FOR THE ROBOTS. SYSTEM MANUFACTURER: SASIB S.P.A., ITALY SYSTEM MODEL: ROBOKOMBI DECA 5-5T SERIAL NUMBER: IBH 005 1226 CRATE LOADING CAPACITY: 80 000 BPH CRATE UNLOADING CAPACITY: 20 000 BPH ROBOT MANUFACTURER: ABB ROBOTICS PRODUCTS AB, SWEDEN ROBOT TYPE: IRB6400 M97A VERSION: IRB6400/2.4-200 YEAR OF MANUFACTURE: 1998 NUMBER OF ROBOTS 6 PCS PAYLOAD CAPACITY UP TO 200 KG SERIAL NUMBER: 64-06736 VOLTAGE: 3 X 400 V, 50 – 60 HZ ELECTRIC POWER: 7.2 KVA MAXIMUM REACH: 2.4 M MANIPULATOR WEIGHT: 2.050 KG CONTROLLER WEIGHT: 250 KG AXES: 6 AXIS VELOCITIES: 90 – 190 °/S, DEPENDING ON AXIS AXIS VELOCITY RESOLUTION: APPROX. 0.01 °/S EACH AXIS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 1600 x 500 x 1200 mm<br/>description: single-phase<br> 12 change-speed gears<br> 1.5kw<br> tilting table WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 500 X 1200 MM
DESCRIPTION: SINGLE-PHASE
12 CHANGE-SPEED GEARS
1.5KW
TILTING TABLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-vertical machining center mazak nexus 410a built: 2004 control: pc fusion cnc 640 m nexus work table: table size 900 x 410 mm max table load 500 kg t-slots 3 piece distance of t-grooves 125 mm slot width 18 mm travel: x-axis 560 mm y-axis 410 mm z-axis 510 mm speed: rapid traverse: x/y/z axis 36 m / min feed 1 8,000 mm/min spindle speed range 35 - 12,000 rpm tool shank cat 40 main power 18.5 kw tool magazine: number of tool stations 30 of max werkzeugdurchmes ser 80 mm with free extension 125 mm maximum tool length 350 mm maximum tool weight 8 kg machine data (with standard equipment) power consumption: 27.8 kva machine weight ca 4.920 kg machine dimensions: (l x w x h) approx. 2.00 x 2.60 x 2.80 m accessories mazak monitoring system c adaptive feed control (afc) tool breakage detection (tbr) tool time monitoring and replacement tool call (tlm) navigation monitoring display editing navigation pcmcia interface compl. flood cooling coolant system cooling through spindle coolant and chip protection tool length measuring device chip conveyor mayfran lighting of workroom documentation availability from: 01.07.2019	 VERTICAL MACHINING CENTER MAZAK NEXUS 410A BUILT: 2004 CONTROL: PC FUSION CNC 640 M NEXUS WORK TABLE: TABLE SIZE 900 X 410 MM MAX TABLE LOAD 500 KG T-SLOTS 3 PIECE DISTANCE OF T-GROOVES 125 MM SLOT WIDTH 18 MM TRAVEL: X-AXIS 560 MM Y-AXIS 410 MM Z-AXIS 510 MM SPEED: RAPID TRAVERSE: X/Y/Z AXIS 36 M / MIN FEED 1 8,000 MM/MIN SPINDLE SPEED RANGE 35 - 12,000 RPM TOOL SHANK CAT 40 MAIN POWER 18.5 KW TOOL MAGAZINE: NUMBER OF TOOL STATIONS 30 OF MAX WERKZEUGDURCHMES SER 80 MM WITH FREE EXTENSION 125 MM MAXIMUM TOOL LENGTH 350 MM MAXIMUM TOOL WEIGHT 8 KG MACHINE DATA (WITH STANDARD EQUIPMENT) POWER CONSUMPTION: 27.8 KVA MACHINE WEIGHT CA 4.920 KG MACHINE DIMENSIONS: (L X W X H) APPROX. 2.00 X 2.60 X 2.80 M ACCESSORIES MAZAK MONITORING SYSTEM C ADAPTIVE FEED CONTROL (AFC) TOOL BREAKAGE DETECTION (TBR) TOOL TIME MONITORING AND REPLACEMENT TOOL CALL (TLM) NAVIGATION MONITORING DISPLAY EDITING NAVIGATION PCMCIA INTERFACE COMPL. FLOOD COOLING COOLANT SYSTEM COOLING THROUGH SPINDLE COOLANT AND CHIP PROTECTION TOOL LENGTH MEASURING DEVICE CHIP CONVEYOR MAYFRAN LIGHTING OF WORKROOM DOCUMENTATION AVAILABILITY FROM: 01.07.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-0,96 qm, electric, moveable, include \r\n2 decks (with steam) w 780 x d 580 mm mm,\r\nelectrical power: 400 v, 50 cycles,  8,9  kw 0,96 QM, ELECTRIC, MOVEABLE, INCLUDE \R\N2 DECKS (WITH STEAM) W 780 X D 580 MM MM,\R\NELECTRICAL POWER: 400 V, 50 CYCLES, 8,9 KW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 4.957 €
Ubicación: Land-technical data:
brand: stanko

type: 3 e721 w

grinding length: 650 mm
grinding width: 300 mm

12 kw

year: 1986

TECHNICAL DATA: BRAND: STANKO TYPE: 3 E721 W GRINDING LENGTH: 650 MM GRINDING WIDTH: 300 MM 12 KW YEAR: 1986
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-with hardened steel cone grinder, plastic housing\r\nspeed​​: 330 rpm, continuously adjustable from coarse to fine\r\ncapacity: flakes 250 g / min., finely grinding about 220 g / min.\r\nall cereals and oilseeds, dry herbs and spices:\r\n WITH HARDENED STEEL CONE GRINDER, PLASTIC HOUSING\R\NSPEED​​: 330 RPM, CONTINUOUSLY ADJUSTABLE FROM COARSE TO FINE\R\NCAPACITY: FLAKES 250 G / MIN., FINELY GRINDING ABOUT 220 G / MIN.\R\NALL CEREALS AND OILSEEDS, DRY HERBS AND SPICES:\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

2 x ibm 9843-ae1 flashsystem 840

each configured with:

- 2 x af15 fc/fcoe host interface card
- 4 x af1b 1tb emlc flash module


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya
 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 2 X IBM 9843-AE1 FLASHSYSTEM 840 EACH CONFIGURED WITH: - 2 X AF15 FC/FCOE HOST INTERFACE CARD - 4 X AF1B 1TB EMLC FLASH MODULE MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-working width 600 mm, chocolate pump, fan, \r\naccessories: heating chocolate tank + enrobing device\r\ntotal:  l 1810 mm, w 960 mm, h 1770 mm , weight 300 kg\r\ncondition as it is WORKING WIDTH 600 MM, CHOCOLATE PUMP, FAN, \R\NACCESSORIES: HEATING CHOCOLATE TANK + ENROBING DEVICE\R\NTOTAL: L 1810 MM, W 960 MM, H 1770 MM , WEIGHT 300 KG\R\NCONDITION AS IT IS
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

2 x netapp fas2554, 

each configured with:

- 24 x 2tb disks


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya
 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 2 X NETAPP FAS2554, EACH CONFIGURED WITH: - 24 X 2TB DISKS MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-5 decks, 1800 x 2000 mm, include steaming unit\r\ndimensions: w 2300, h 2350 mm,\r\n                   l 2900 + suction device 500 = 3400 mm\r\noven is already dismantled 5 DECKS, 1800 X 2000 MM, INCLUDE STEAMING UNIT\R\NDIMENSIONS: W 2300, H 2350 MM,\R\N L 2900 + SUCTION DEVICE 500 = 3400 MM\R\NOVEN IS ALREADY DISMANTLED
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 1.380 €
Ubicación: Land-slot boring machine schelling bm 2

drilling depth of 150 mm
height of 190 mm
sideways (transverse adjustment) 300 mm
table size l x w 660 x 320 mm quick-clamping device for drill ã? 1-20 mm
motor output 1,5 kw
motor 1,1 kw
spindle speeds 2000 or 4000 rpm spindle speeds 3000/ 6000 rpm drill depth scale drill elevation scale working height 880 mm
dimensions w x d x h 700 x 800 x 1300 mm
weight ca. 280 kg
built in 1992

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 
 SLOT BORING MACHINE SCHELLING BM 2 DRILLING DEPTH OF 150 MM HEIGHT OF 190 MM SIDEWAYS (TRANSVERSE ADJUSTMENT) 300 MM TABLE SIZE L X W 660 X 320 MM QUICK-CLAMPING DEVICE FOR DRILL &ATILDE;? 1-20 MM MOTOR OUTPUT 1,5 KW MOTOR 1,1 KW SPINDLE SPEEDS 2000 OR 4000 RPM SPINDLE SPEEDS 3000/ 6000 RPM DRILL DEPTH SCALE DRILL ELEVATION SCALE WORKING HEIGHT 880 MM DIMENSIONS W X D X H 700 X 800 X 1300 MM WEIGHT CA. 280 KG BUILT IN 1992 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-longitudinal + diagonal cutting possible\r\nit is an auxiliary for a precise and accurately defined cut of bakery products on trays. LONGITUDINAL + DIAGONAL CUTTING POSSIBLE\R\NIT IS AN AUXILIARY FOR A PRECISE AND ACCURATELY DEFINED CUT OF BAKERY PRODUCTS ON TRAYS.
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

- 50 x hp 2510-24 switch - j9019b
these are used switches

- 2 x hp 2510-48 switch - j9020a
these are used switches

- 4 x hp 2530-24 switch - j9782a
these are used switches

- 5 x hp2530-48 port switch- j9778a
these are new switches, nib


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya
 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): - 50 X HP 2510-24 SWITCH - J9019B THESE ARE USED SWITCHES - 2 X HP 2510-48 SWITCH - J9020A THESE ARE USED SWITCHES - 4 X HP 2530-24 SWITCH - J9782A THESE ARE USED SWITCHES - 5 X HP2530-48 PORT SWITCH- J9778A THESE ARE NEW SWITCHES, NIB MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-include 4 decks 1200 x 480 mm\r\nproofer for 8 plates 600 x 400 mm\r\nelectrical power: 400 v, 50 cycles, approx. 29 kw\r\naccessories: suction device\r\ncondition as it is - cpl. assembled loaded INCLUDE 4 DECKS 1200 X 480 MM\R\NPROOFER FOR 8 PLATES 600 X 400 MM\R\NELECTRICAL POWER: 400 V, 50 CYCLES, APPROX. 29 KW\R\NACCESSORIES: SUCTION DEVICE\R\NCONDITION AS IT IS - CPL. ASSEMBLED LOADED
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-the cable peeling machine master 140 serves the peeling of underground cables, cables with steel reinforcement, cable with aluminium and lead reinforcement, as well as cables with pvc and rubber casing with a diameter of approx. 30 mm.die is 140 master with a massive two blade system for "breaking up" reinforced cable. both knives can be set separately on each required cutting depth. the machine is equipped with foot switch and is ce-konform.technische datendurchmesser cable: 30 mm to 140 mmtrenngeschwindigkeit: 12 m / minantrieb: 6 kw - 380 voltabmessungen: l 1.800 x b 1,000 x h 1.200 mm: 600 kganzahl knives: 2    THE CABLE PEELING MACHINE MASTER 140 SERVES THE PEELING OF UNDERGROUND CABLES, CABLES WITH STEEL REINFORCEMENT, CABLE WITH ALUMINIUM AND LEAD REINFORCEMENT, AS WELL AS CABLES WITH PVC AND RUBBER CASING WITH A DIAMETER OF APPROX. 30 MM.DIE IS 140 MASTER WITH A MASSIVE TWO BLADE SYSTEM FOR "BREAKING UP" REINFORCED CABLE. BOTH KNIVES CAN BE SET SEPARATELY ON EACH REQUIRED CUTTING DEPTH. THE MACHINE IS EQUIPPED WITH FOOT SWITCH AND IS CE-KONFORM.TECHNISCHE DATENDURCHMESSER CABLE: 30 MM TO 140 MMTRENNGESCHWINDIGKEIT: 12 M / MINANTRIEB: 6 KW - 380 VOLTABMESSUNGEN: L 1.800 X B 1,000 X H 1.200 MM: 600 KGANZAHL KNIVES: 2
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Ubicación: Land- cap. approx. 100 pretzel/h, \r\nautomatic saltstrewer, variable speed\r\npower: 3 ph., 400 v, 4,3 kw CAP. APPROX. 100 PRETZEL/H, \R\NAUTOMATIC SALTSTREWER, VARIABLE SPEED\R\NPOWER: 3 PH., 400 V, 4,3 KW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-hascon.com: used it-hardware for/from datacenters in germany, uk, usa, asia, and worldwide!

dear broker colleagues,
sehr geehrte brokerkollegen,

we have for sale this used hardware ex lager/stock deutschland:

2 x ibm 3584-ha ts3500 tape library
2 x ibm 3584-l23 ts3500 tape library
8 x ibm 3584-d23 ts3500 tape library
4 x ibm 3584-s24 ts3500 tape library

libraries available ex-germany without any drives.

more information on request.

wir freuen uns ueber angebote aus deutschland und international.


best regards,

holger has

contact hascon sales team at:

hascon consulting:
gasteiner st. 6
10717 berlin, germany

tel   :   ++49 - (0)30 - 88 40 21
fax  :   ++49 - (0)30 - 88 40 25
e-mail:   hardware@hascon.com

our business hours in germany/ unsere geschäftszeiten: 
9.00 a.m. - 6.00 p.m. central european time
3.00 a.m. - 12.00 p.m. eastern time usa


q/ z19730
 HASCON.COM: USED IT-HARDWARE FOR/FROM DATACENTERS IN GERMANY, UK, USA, ASIA, AND WORLDWIDE! DEAR BROKER COLLEAGUES, SEHR GEEHRTE BROKERKOLLEGEN, WE HAVE FOR SALE THIS USED HARDWARE EX LAGER/STOCK DEUTSCHLAND: 2 X IBM 3584-HA TS3500 TAPE LIBRARY 2 X IBM 3584-L23 TS3500 TAPE LIBRARY 8 X IBM 3584-D23 TS3500 TAPE LIBRARY 4 X IBM 3584-S24 TS3500 TAPE LIBRARY LIBRARIES AVAILABLE EX-GERMANY WITHOUT ANY DRIVES. MORE INFORMATION ON REQUEST. WIR FREUEN UNS UEBER ANGEBOTE AUS DEUTSCHLAND UND INTERNATIONAL. BEST REGARDS, HOLGER HAS CONTACT HASCON SALES TEAM AT: HASCON CONSULTING: GASTEINER ST. 6 10717 BERLIN, GERMANY TEL : ++49 - (0)30 - 88 40 21 FAX : ++49 - (0)30 - 88 40 25 E-MAIL: HARDWARE@HASCON.COM OUR BUSINESS HOURS IN GERMANY/ UNSERE GESCHäFTSZEITEN: 9.00 A.M. - 6.00 P.M. CENTRAL EUROPEAN TIME 3.00 A.M. - 12.00 P.M. EASTERN TIME USA Q/ Z19730
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

1.) 20 x hp compaq elitedesk 8200 usdt (p/n: xl511av)
- 1 x intel core i5-2400s (2.50ghz)
- 4gb ram
- 256gb hdd


2.) 40 x hp z400 workstation (p/n: vs933av)
- 1 x intel xeon cpu w3690 (3,46ghz, 12mb cache, 6 cores)
- 16gb ram
- 300gb hdds
- nvidia quadro 2000 (1gb ram)


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya
 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 1.) 20 X HP COMPAQ ELITEDESK 8200 USDT (P/N: XL511AV) - 1 X INTEL CORE I5-2400S (2.50GHZ) - 4GB RAM - 256GB HDD 2.) 40 X HP Z400 WORKSTATION (P/N: VS933AV) - 1 X INTEL XEON CPU W3690 (3,46GHZ, 12MB CACHE, 6 CORES) - 16GB RAM - 300GB HDDS - NVIDIA QUADRO 2000 (1GB RAM) MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-analogical control, baking-chamber for 1 rack, \r\nfor plates 580 x 780 mm, include water filter\r\ngasburner + water filter are new ANALOGICAL CONTROL, BAKING-CHAMBER FOR 1 RACK, \R\NFOR PLATES 580 X 780 MM, INCLUDE WATER FILTER\R\NGASBURNER + WATER FILTER ARE NEW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

7 x ws-c2960x-24ps-l v01
22 x ws-c2960x-24ts-l v03
3 x ws-c2960x-24psq-l v01
170 x air-cap2602i-e-k9
2 x air-cap2602i-e-k9 nib, original new packaging
2 x wireless controller (cluster) air-ct5508-k9 (500 licences)
2 x wireless controller (cluster) air-ct5508-k9 (500 licences)
2 x wireless controller (cluster) air-ct5508-k9 (110 licences)


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

  WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 7 X WS-C2960X-24PS-L V01 22 X WS-C2960X-24TS-L V03 3 X WS-C2960X-24PSQ-L V01 170 X AIR-CAP2602I-E-K9 2 X AIR-CAP2602I-E-K9 NIB, ORIGINAL NEW PACKAGING 2 X WIRELESS CONTROLLER (CLUSTER) AIR-CT5508-K9 (500 LICENCES) 2 X WIRELESS CONTROLLER (CLUSTER) AIR-CT5508-K9 (500 LICENCES) 2 X WIRELESS CONTROLLER (CLUSTER) AIR-CT5508-K9 (110 LICENCES) MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-electric, roating rack\r\nbaking chamber: 1 rack for 8 pans 600  x  400 mm\r\nincl. digital count down\r\n ELECTRIC, ROATING RACK\R\NBAKING CHAMBER: 1 RACK FOR 8 PANS 600 X 400 MM\R\NINCL. DIGITAL COUNT DOWN\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-equipment / additional information:
printing system:
print speed a4: 		71 sheets / min.
printing speed a3: 		38 sheets / min.
printing speed sra3: 	36 sheets / min.
print resolution: 		1,200 x 1,200 dpi x 8bit, 1,200 x 3,600 dpi equivalent
system specifications
paper weight: 			62 - 300 g / m²
paper sizes: 			330 x 487 mm
maximum pressure range: 	323 x 480 mm
paper input capacity: 		standard: 1,500 sheets // max: 7,500 sheets
paper output capacity: max .: 13,600 sheets
pressure controller
pressure controller type: 	internal konica minolta controller ic-602
external efi fiery controller ic-308
external creo pressure controller ic-309

  EQUIPMENT / ADDITIONAL INFORMATION: PRINTING SYSTEM: PRINT SPEED A4: 71 SHEETS / MIN. PRINTING SPEED A3: 38 SHEETS / MIN. PRINTING SPEED SRA3: 36 SHEETS / MIN. PRINT RESOLUTION: 1,200 X 1,200 DPI X 8BIT, 1,200 X 3,600 DPI EQUIVALENT SYSTEM SPECIFICATIONS PAPER WEIGHT: 62 - 300 G / M² PAPER SIZES: 330 X 487 MM MAXIMUM PRESSURE RANGE: 323 X 480 MM PAPER INPUT CAPACITY: STANDARD: 1,500 SHEETS // MAX: 7,500 SHEETS PAPER OUTPUT CAPACITY: MAX .: 13,600 SHEETS PRESSURE CONTROLLER PRESSURE CONTROLLER TYPE: INTERNAL KONICA MINOLTA CONTROLLER IC-602 EXTERNAL EFI FIERY CONTROLLER IC-308 EXTERNAL CREO PRESSURE CONTROLLER IC-309
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Ubicación: Land-engel robot viper 20 speed, can be used on all engel injection moulding machines. only approx. 13.000 working hours

description
x-axis: 500 mm, y-axis 800 mm, z-axis 3.320 mm ENGEL ROBOT VIPER 20 SPEED, CAN BE USED ON ALL ENGEL INJECTION MOULDING MACHINES. ONLY APPROX. 13.000 WORKING HOURS DESCRIPTION X-AXIS: 500 MM, Y-AXIS 800 MM, Z-AXIS 3.320 MM
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-3 decks (with steam) 580 x 780 mm,\r\n1,44 qm, electric, assembled on a steel plate\r\nelectrical power: 380 v, 50 cycles 3 DECKS (WITH STEAM) 580 X 780 MM,\R\N1,44 QM, ELECTRIC, ASSEMBLED ON A STEEL PLATE\R\NELECTRICAL POWER: 380 V, 50 CYCLES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-engel erc 74/2-e integrated robot built in 2004 with its own electrical cabinet, machine complete checked.

ENGEL ERC 74/2-E INTEGRATED ROBOT BUILT IN 2004 WITH ITS OWN ELECTRICAL CABINET, MACHINE COMPLETE CHECKED.
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-max. 100 kg dough, 1 speed\r\nprotective device, stationary\r\nbowl  +  doughhook was tinned MAX. 100 KG DOUGH, 1 SPEED\R\NPROTECTIVE DEVICE, STATIONARY\R\NBOWL + DOUGHHOOK WAS TINNED
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 85 €
Ubicación: Land-over 100 pieces of corletten, b 230cm t 115cm h 180cm - used -:
 
price from site: â?¬85.-/ piece (net) in complete loss!
 
price for larger part: 95.-â?¬ (net), from the site!
 
manufacturer: used cooking
type: multi box 230
year: 06/95
load capacity: 600 kg
weight: approx. 87 kg
dimensions:
height: 180 cm
width: 230 cm
depth: 115 cm
klapp and folding
stackable: no
without runners
color: blue
shelves: as requirements for upholstered furniture are also available single push rods
condition: used and operational
location: 40721 hilden OVER 100 PIECES OF CORLETTEN, B 230CM T 115CM H 180CM - USED -: PRICE FROM SITE: &ACIRC;?&NOT;85.-/ PIECE (NET) IN COMPLETE LOSS! PRICE FOR LARGER PART: 95.-&ACIRC;?&NOT; (NET), FROM THE SITE! MANUFACTURER: USED COOKING TYPE: MULTI BOX 230 YEAR: 06/95 LOAD CAPACITY: 600 KG WEIGHT: APPROX. 87 KG DIMENSIONS: HEIGHT: 180 CM WIDTH: 230 CM DEPTH: 115 CM KLAPP AND FOLDING STACKABLE: NO WITHOUT RUNNERS COLOR: BLUE SHELVES: AS REQUIREMENTS FOR UPHOLSTERED FURNITURE ARE ALSO AVAILABLE SINGLE PUSH RODS CONDITION: USED AND OPERATIONAL LOCATION: 40721 HILDEN
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-aluminium caps ranging from<br/>diameters of 18 [mm] to 38 [mm] <br/>id5483 ALUMINIUM CAPS RANGING FROM
DIAMETERS OF 18 [MM] TO 38 [MM]
ID5483
Vendedor: Seegräber GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more KO types: