5 ofertas

Año de construcción: usado
Ubicación: Land-3-side seal pouch machine x2sets

(3-side high speed seal pouch machine )
make:solpac(korea)
manufacturing year:2015
 model:sp-505 
1-lane horizontal 3-side sealing pouch machine
-servo drive
-eye mark control
-static eliminator
-dust collector
2.sachet counting and cutting system
-rotary type cutter/servo control
-chain type gripper system
-outlet suit/counting
3.automatic sorting machine(spl-s)
-charge amount:1-2g
-packing speed:300~450bags/min
-sachet:3-side adhesion,1-side folding
-sachet size:horizontal 50mm/vertical 300mm
(50mm. former change)
-sachet material:al 4-layer paper , pp 2-layer
opp- 2 layer paper, heat bonding film
-bonding:uniform heat bonding method
-bonding temperature adjustment:pid control
(0?~300?) adjustmenton tuchscreen
-cooling:rotation type press bar
-machine weight:1.6ton
-electric:380v,3ph,60hz)
-air:5kh/?
-film consumption: check consumption of encoder
-product charging:hopper  30liter
supply timing / arbitrary adjustment method
-drive:
1)main motor:2hp,mitsubishi
2)reduction gear:worm reduction gear 30:1
3)center sealbar:
4)pressure system driven by sealbar.cam
5)horizontal bonding: by servo motor
-electric part:
1)heater:catridge type
2)electrical output contact: solid state relay(ssr)
3)control:plc
4)temperature control:pid control
5)tuch screen:monitering/counting
reset counter,inverter,heater,door,film
-sensing device for film: tension-controlled powder
brake film tension control, film
curl detection, film connection tape detection
detecting film tape continuousity
 film break,machine stop
-pouch loader:
1)sorting speed:max.45m/min
2)pouch stack 3-sided bonding

(3-side seal pouch machine) 
make:sinhan(korea)
manufacturing year:2013
3 -side seal type(opp+pe)
cap.:350~400 packs/min
pack size: l40xw55~59mm
temper.:400?
pack material:safe-gel
end sealing:rotary end sealing
temper'controller:pid type
touch monitor control system
end cutter:rotary type
main motor:3.75kw
w/sorting machine:1set
speed:15m/min
sensor type
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    



 3-SIDE SEAL POUCH MACHINE X2SETS (3-SIDE HIGH SPEED SEAL POUCH MACHINE ) MAKE:SOLPAC(KOREA) MANUFACTURING YEAR:2015 MODEL:SP-505 1-LANE HORIZONTAL 3-SIDE SEALING POUCH MACHINE -SERVO DRIVE -EYE MARK CONTROL -STATIC ELIMINATOR -DUST COLLECTOR 2.SACHET COUNTING AND CUTTING SYSTEM -ROTARY TYPE CUTTER/SERVO CONTROL -CHAIN TYPE GRIPPER SYSTEM -OUTLET SUIT/COUNTING 3.AUTOMATIC SORTING MACHINE(SPL-S) -CHARGE AMOUNT:1-2G -PACKING SPEED:300~450BAGS/MIN -SACHET:3-SIDE ADHESION,1-SIDE FOLDING -SACHET SIZE:HORIZONTAL 50MM/VERTICAL 300MM (50MM. FORMER CHANGE) -SACHET MATERIAL:AL 4-LAYER PAPER , PP 2-LAYER OPP- 2 LAYER PAPER, HEAT BONDING FILM -BONDING:UNIFORM HEAT BONDING METHOD -BONDING TEMPERATURE ADJUSTMENT:PID CONTROL (0?~300?) ADJUSTMENTON TUCHSCREEN -COOLING:ROTATION TYPE PRESS BAR -MACHINE WEIGHT:1.6TON -ELECTRIC:380V,3PH,60HZ) -AIR:5KH/? -FILM CONSUMPTION: CHECK CONSUMPTION OF ENCODER -PRODUCT CHARGING:HOPPER 30LITER SUPPLY TIMING / ARBITRARY ADJUSTMENT METHOD -DRIVE: 1)MAIN MOTOR:2HP,MITSUBISHI 2)REDUCTION GEAR:WORM REDUCTION GEAR 30:1 3)CENTER SEALBAR: 4)PRESSURE SYSTEM DRIVEN BY SEALBAR.CAM 5)HORIZONTAL BONDING: BY SERVO MOTOR -ELECTRIC PART: 1)HEATER:CATRIDGE TYPE 2)ELECTRICAL OUTPUT CONTACT: SOLID STATE RELAY(SSR) 3)CONTROL:PLC 4)TEMPERATURE CONTROL:PID CONTROL 5)TUCH SCREEN:MONITERING/COUNTING RESET COUNTER,INVERTER,HEATER,DOOR,FILM -SENSING DEVICE FOR FILM: TENSION-CONTROLLED POWDER BRAKE FILM TENSION CONTROL, FILM CURL DETECTION, FILM CONNECTION TAPE DETECTION DETECTING FILM TAPE CONTINUOUSITY FILM BREAK,MACHINE STOP -POUCH LOADER: 1)SORTING SPEED:MAX.45M/MIN 2)POUCH STACK 3-SIDED BONDING (3-SIDE SEAL POUCH MACHINE) MAKE:SINHAN(KOREA) MANUFACTURING YEAR:2013 3 -SIDE SEAL TYPE(OPP+PE) CAP.:350~400 PACKS/MIN PACK SIZE: L40XW55~59MM TEMPER.:400? PACK MATERIAL:SAFE-GEL END SEALING:ROTARY END SEALING TEMPER'CONTROLLER:PID TYPE TOUCH MONITOR CONTROL SYSTEM END CUTTER:ROTARY TYPE MAIN MOTOR:3.75KW W/SORTING MACHINE:1SET SPEED:15M/MIN SENSOR TYPE BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 22.000 €
Ubicación: Land-description:<br />
out of service, but not yet dismantled<br />
<br />
visit on request any time possible<br />
<br />
out of service, but not yet dismantled<br />
<br />
visit on request any time possible<br />
filler points:<br />
4<br />
<br />
capacity:<br />
200 / h<br />
<br />
equipment:<br />
halbautomat<br />
<br />
<br />

<br />
besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />
you have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />
or do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />
ask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />
our drink technicians are working worldwide for our customers!<br />
we are looking forward to hearing from you.<br />
<br />
all information is supplied without guarantee. DESCRIPTION:
OUT OF SERVICE, BUT NOT YET DISMANTLED

VISIT ON REQUEST ANY TIME POSSIBLE

OUT OF SERVICE, BUT NOT YET DISMANTLED

VISIT ON REQUEST ANY TIME POSSIBLE
FILLER POINTS:
4

CAPACITY:
200 / H

EQUIPMENT:
HALBAUTOMAT



BESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
YOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
OR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
ASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
OUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
WE ARE LOOKING FORWARD TO HEARING FROM YOU.

ALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Precio: 96.000 €
Ubicación: Land- 
d 101
1 stork bottle rinsing and bottle filling plant for pet 
and for glass bottles from 0,2 to 1,0 litre
manufacturer is 2004, working time about 3.500 hour, 
so it tell us the previous owner
existing about 

a.) a stork bottle cleaning machine 
 with 48 bottle hanging retainers 
washing capacity per min. are 330 bottles
direct coupled with the stork bottle filling machine
with bottle inlet changeover possibilties for
glass – and for pet bottles.
with hot water circulation system for the bottles rinsing
mit flaschen einlauf-umstellungsmöglichkeiten

the inlet to the stork rinsing machine is done 
with a 1 lane bottle conveyor to the
 inflow of the bottle rinsing machine

b. ) stork filling machine and bottle closed station
mach. no. rwfrk 8f/s/as2/12-clb
mach. no. 308810
manufacturer year 2004
bottle filler with 40 bottles in one circle segment
acceptance capacity 48 bottle on one round
to rinse the bottle with water and air
capacity of the stork rinser is 330 bottles per minute.

capacity 20.000 bottles per hour
suitable for following bottle cover plates: 

 12-head roll-on capper for pet bottles
 12-head crowncork capper for glass bottles
 12-head plasticcap capper for pet bottles
with a stage to arrive the 3 balance tanks 
for different lids
with product valve knot
with a cip store tank (400 l) and cip devices
for the bottle filling heads and for the product balance tank
with different format tools (sterne, kurven)
with complete wall housing
with operation panel for both machine segment

c.) outlet of the bottles after lid spending and botlles closing
to a 1-lane bottle conveyor.
if it needs a twist of bottles closing for example 
for 1 ltr bottles, so can this be solved with a leased 
schmalbach twist off closing machine.


d.) electronic cabinet with siemens s 7 control system
installed in 9 electronic cabinets
masch no. 308810
manufacturer year 2004
with 2 cooling plants with 1.300 watt for each one.
cable inlet is made well done from the bottom 
of the electronic cabinets.

e.) divers conveyor transport plants for glass bottles 
and approx. 25 m, 
with storage conveyor with 5 lines, 
with 90° curve, 
with 1 single bottle elevator from a high of 3 m to 1,60 m

price up standing point:			96.000,00 euro







    D 101 1 STORK BOTTLE RINSING AND BOTTLE FILLING PLANT FOR PET AND FOR GLASS BOTTLES FROM 0,2 TO 1,0 LITRE MANUFACTURER IS 2004, WORKING TIME ABOUT 3.500 HOUR, SO IT TELL US THE PREVIOUS OWNER EXISTING ABOUT A.) A STORK BOTTLE CLEANING MACHINE WITH 48 BOTTLE HANGING RETAINERS WASHING CAPACITY PER MIN. ARE 330 BOTTLES DIRECT COUPLED WITH THE STORK BOTTLE FILLING MACHINE WITH BOTTLE INLET CHANGEOVER POSSIBILTIES FOR GLASS – AND FOR PET BOTTLES. WITH HOT WATER CIRCULATION SYSTEM FOR THE BOTTLES RINSING MIT FLASCHEN EINLAUF-UMSTELLUNGSMöGLICHKEITEN THE INLET TO THE STORK RINSING MACHINE IS DONE WITH A 1 LANE BOTTLE CONVEYOR TO THE INFLOW OF THE BOTTLE RINSING MACHINE B. ) STORK FILLING MACHINE AND BOTTLE CLOSED STATION MACH. NO. RWFRK 8F/S/AS2/12-CLB MACH. NO. 308810 MANUFACTURER YEAR 2004 BOTTLE FILLER WITH 40 BOTTLES IN ONE CIRCLE SEGMENT ACCEPTANCE CAPACITY 48 BOTTLE ON ONE ROUND TO RINSE THE BOTTLE WITH WATER AND AIR CAPACITY OF THE STORK RINSER IS 330 BOTTLES PER MINUTE. CAPACITY 20.000 BOTTLES PER HOUR SUITABLE FOR FOLLOWING BOTTLE COVER PLATES: 12-HEAD ROLL-ON CAPPER FOR PET BOTTLES 12-HEAD CROWNCORK CAPPER FOR GLASS BOTTLES 12-HEAD PLASTICCAP CAPPER FOR PET BOTTLES WITH A STAGE TO ARRIVE THE 3 BALANCE TANKS FOR DIFFERENT LIDS WITH PRODUCT VALVE KNOT WITH A CIP STORE TANK (400 L) AND CIP DEVICES FOR THE BOTTLE FILLING HEADS AND FOR THE PRODUCT BALANCE TANK WITH DIFFERENT FORMAT TOOLS (STERNE, KURVEN) WITH COMPLETE WALL HOUSING WITH OPERATION PANEL FOR BOTH MACHINE SEGMENT C.) OUTLET OF THE BOTTLES AFTER LID SPENDING AND BOTLLES CLOSING TO A 1-LANE BOTTLE CONVEYOR. IF IT NEEDS A TWIST OF BOTTLES CLOSING FOR EXAMPLE FOR 1 LTR BOTTLES, SO CAN THIS BE SOLVED WITH A LEASED SCHMALBACH TWIST OFF CLOSING MACHINE. D.) ELECTRONIC CABINET WITH SIEMENS S 7 CONTROL SYSTEM INSTALLED IN 9 ELECTRONIC CABINETS MASCH NO. 308810 MANUFACTURER YEAR 2004 WITH 2 COOLING PLANTS WITH 1.300 WATT FOR EACH ONE. CABLE INLET IS MADE WELL DONE FROM THE BOTTOM OF THE ELECTRONIC CABINETS. E.) DIVERS CONVEYOR TRANSPORT PLANTS FOR GLASS BOTTLES AND APPROX. 25 M, WITH STORAGE CONVEYOR WITH 5 LINES, WITH 90° CURVE, WITH 1 SINGLE BOTTLE ELEVATOR FROM A HIGH OF 3 M TO 1,60 M PRICE UP STANDING POINT: 96.000,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Ubicación: Land-henkelman polar 2-85 double chamber vacuum machine
this henkelman polar 2-85 is one of the largest double chamber vacuum machines that henkelman can deliver.
with the largest busch 300m3/h vacuum pump this machine is capable of packing at a very high speed. with the two available chambers this henkelman 2-85 can be used very efficient so you lose as little time as possible.
the machine is very easy to program and set-up 10 saved programs.
because the machine has a flat working service, no edges and ridges the henkelman can be washed down in minutes.
specifications:
chamber dimensions (l x w x h) 830mm x 840mm x 255mm
sealbar length (4 sealbars) 840mm.
300 m3/h busch vacuum pump
10-30 second cycle time (depensing on set-up)
machine is sensor controlled, when vacuum is reached the machine will automatically stop the cycle. this is for faster cycles.
double seal for a strong and durable steal.
complete stainless steel.
delivered with insert plates for even faster packing cycles. 



scotraco has many more machines available, we deal with meat/ fish processing and packaging machines. visit our profile or website for more information.

overview from our brands;
baader, marel, henkovac, henkelman, polyclip, automac, multivac, vc999, laska, kramer greber, scanvaegt, laska, koppens, cfs, gea, yamato, ishida, multipond, jasa, gks, innotech, boss, cryovac, ishida, busch HENKELMAN POLAR 2-85 DOUBLE CHAMBER VACUUM MACHINE THIS HENKELMAN POLAR 2-85 IS ONE OF THE LARGEST DOUBLE CHAMBER VACUUM MACHINES THAT HENKELMAN CAN DELIVER. WITH THE LARGEST BUSCH 300M3/H VACUUM PUMP THIS MACHINE IS CAPABLE OF PACKING AT A VERY HIGH SPEED. WITH THE TWO AVAILABLE CHAMBERS THIS HENKELMAN 2-85 CAN BE USED VERY EFFICIENT SO YOU LOSE AS LITTLE TIME AS POSSIBLE. THE MACHINE IS VERY EASY TO PROGRAM AND SET-UP 10 SAVED PROGRAMS. BECAUSE THE MACHINE HAS A FLAT WORKING SERVICE, NO EDGES AND RIDGES THE HENKELMAN CAN BE WASHED DOWN IN MINUTES. SPECIFICATIONS: CHAMBER DIMENSIONS (L X W X H) 830MM X 840MM X 255MM SEALBAR LENGTH (4 SEALBARS) 840MM. 300 M3/H BUSCH VACUUM PUMP 10-30 SECOND CYCLE TIME (DEPENSING ON SET-UP) MACHINE IS SENSOR CONTROLLED, WHEN VACUUM IS REACHED THE MACHINE WILL AUTOMATICALLY STOP THE CYCLE. THIS IS FOR FASTER CYCLES. DOUBLE SEAL FOR A STRONG AND DURABLE STEAL. COMPLETE STAINLESS STEEL. DELIVERED WITH INSERT PLATES FOR EVEN FASTER PACKING CYCLES. SCOTRACO HAS MANY MORE MACHINES AVAILABLE, WE DEAL WITH MEAT/ FISH PROCESSING AND PACKAGING MACHINES. VISIT OUR PROFILE OR WEBSITE FOR MORE INFORMATION. OVERVIEW FROM OUR BRANDS; BAADER, MAREL, HENKOVAC, HENKELMAN, POLYCLIP, AUTOMAC, MULTIVAC, VC999, LASKA, KRAMER GREBER, SCANVAEGT, LASKA, KOPPENS, CFS, GEA, YAMATO, ISHIDA, MULTIPOND, JASA, GKS, INNOTECH, BOSS, CRYOVAC, ISHIDA, BUSCH
Vendedor: Scotraco B.V.
Año de construcción: usado
Ubicación: Land-a frame, brown, type chgb 71/50 s
masch. -no.: 159, 1982.
equipped with:-frame 500 hub
-transmission
-drive approx. 63 kw aeg
-hydraulic feed
-hydraulic roller lift
-automatic overhang adjustment
-compl. single slope
-riving knife brown
-clamping cars with 18 m-long railway rails
-50 gang saws, little run or a width of 125 mm
-about 80 old gang saws
-10 great roles 15cm diameter. 1, 40 m, of which the first two with drive
-control box
-div. accessories

contact person mr. mã¼ller

see also our over 200 more offers. click on
"more offers of this provider"
 A FRAME, BROWN, TYPE CHGB 71/50 S MASCH. -NO.: 159, 1982. EQUIPPED WITH:-FRAME 500 HUB -TRANSMISSION -DRIVE APPROX. 63 KW AEG -HYDRAULIC FEED -HYDRAULIC ROLLER LIFT -AUTOMATIC OVERHANG ADJUSTMENT -COMPL. SINGLE SLOPE -RIVING KNIFE BROWN -CLAMPING CARS WITH 18 M-LONG RAILWAY RAILS -50 GANG SAWS, LITTLE RUN OR A WIDTH OF 125 MM -ABOUT 80 OLD GANG SAWS -10 GREAT ROLES 15CM DIAMETER. 1, 40 M, OF WHICH THE FIRST TWO WITH DRIVE -CONTROL BOX -DIV. ACCESSORIES CONTACT PERSON MR. M&ATILDE;&FRAC14;LLER SEE ALSO OUR OVER 200 MORE OFFERS. CLICK ON "MORE OFFERS OF THIS PROVIDER"
Vendedor: MPS Frank Müller
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ALBA types: