65 ofertas

Año de construcción: usado
Ubicación: Land-horizontal strapping machine
good condition
control siemens s5-095u
park position in height 2000 mm measured by ok package car profile
vertical drive with incremental encoder (max. 99 programs)
with headers and page press HORIZONTAL STRAPPING MACHINE GOOD CONDITION CONTROL SIEMENS S5-095U PARK POSITION IN HEIGHT 2000 MM MEASURED BY OK PACKAGE CAR PROFILE VERTICAL DRIVE WITH INCREMENTAL ENCODER (MAX. 99 PROGRAMS) WITH HEADERS AND PAGE PRESS
Vendedor: Stöcker Beton GmbH
Año de construcción: usado
Precio: 34.500 EU€
Ubicación: Land-plasma cutter ajan shp 260a is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. with these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. condition of the equipment good. PLASMA CUTTER AJAN SHP 260A IS A NUMERICALLY CONTROLLED OXYGEN SHEET CUTTING DEVICE, USING ORIGINAL CUTTING TOOLS MOUNTED ON IT, AND CAN BE GAS AND PLASMA TOOLS. WITH THESE TOOLS YOU CAN MAKE STRAIGHT CUTS AND LINEAR CUTS, ACCORDING TO PROGRAMMED CUTTING PROGRAMS OR BY MANUALLY CONTROLLING THE CUTTING PATH. CONDITION OF THE EQUIPMENT GOOD.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-code: 0545
brand: tagliabue
model: 600 -  ce standard 

top / bottom calibrating sanding line  - ce  standard - year  2007

working width  mm 600
composition  top machine :
1° group calibrating roller 
2° group pad 
3° group pad 
composition  bottom machine:
1° group calibrating roller 
2° group pad 
3°  group pad 
belt size  mm 2600
touchscreen for the  management of  machining  programs  and for the automatic  setting of the various groups
independent motors 
blowers on the belts



 CODE: 0545 BRAND: TAGLIABUE MODEL: 600 - CE STANDARD TOP / BOTTOM CALIBRATING SANDING LINE - CE STANDARD - YEAR 2007 WORKING WIDTH MM 600 COMPOSITION TOP MACHINE : 1° GROUP CALIBRATING ROLLER 2° GROUP PAD 3° GROUP PAD COMPOSITION BOTTOM MACHINE: 1° GROUP CALIBRATING ROLLER 2° GROUP PAD 3° GROUP PAD BELT SIZE MM 2600 TOUCHSCREEN FOR THE MANAGEMENT OF MACHINING PROGRAMS AND FOR THE AUTOMATIC SETTING OF THE VARIOUS GROUPS INDEPENDENT MOTORS BLOWERS ON THE BELTS
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-pulling force - max.: 20 kn<br/>max. ram stroke: 250 (400) mm<br/>max. workpiece diameter:  mm<br/>control:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>nc broaching machine simplifies the clearing of keyways and internal gears<br/>in through holes and blind holes<br/>condition: little used, very well preserved.<br/><br/>with accessories in the new value of about 20000 chf<br/>cutting knife including steel guides<br/>guide bushings<br/>chuck<br/><br/>technical specifications<br/>programming interactive touch screen<br/>language<br/>english, german, french, dutch in metric and customs<br/>system<br/>equipment cross table / part table / light curtain<br/>stroke<br/>400mm hand adjustment<br/>250mm automatic clearing cycle<br/>keyway width 2 to 32mm<br/>workpiece diameter 620mm (in relation to the bore diameter)<br/>maximum impact force 20kn fixed value<br/>cutting speed 15m / min., infinitely adjustable<br/>dimension (width x depth x height)<br/>1000 x 1200 x 2440mm<br/>net weight 950 kg<br/><br/><br/><br/><br/> PULLING FORCE - MAX.: 20 KN
MAX. RAM STROKE: 250 (400) MM
MAX. WORKPIECE DIAMETER: MM
CONTROL:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
NC BROACHING MACHINE SIMPLIFIES THE CLEARING OF KEYWAYS AND INTERNAL GEARS
IN THROUGH HOLES AND BLIND HOLES
CONDITION: LITTLE USED, VERY WELL PRESERVED.

WITH ACCESSORIES IN THE NEW VALUE OF ABOUT 20000 CHF
CUTTING KNIFE INCLUDING STEEL GUIDES
GUIDE BUSHINGS
CHUCK

TECHNICAL SPECIFICATIONS
PROGRAMMING INTERACTIVE TOUCH SCREEN
LANGUAGE
ENGLISH, GERMAN, FRENCH, DUTCH IN METRIC AND CUSTOMS
SYSTEM
EQUIPMENT CROSS TABLE / PART TABLE / LIGHT CURTAIN
STROKE
400MM HAND ADJUSTMENT
250MM AUTOMATIC CLEARING CYCLE
KEYWAY WIDTH 2 TO 32MM
WORKPIECE DIAMETER 620MM (IN RELATION TO THE BORE DIAMETER)
MAXIMUM IMPACT FORCE 20KN FIXED VALUE
CUTTING SPEED 15M / MIN., INFINITELY ADJUSTABLE
DIMENSION (WIDTH X DEPTH X HEIGHT)
1000 X 1200 X 2440MM
NET WEIGHT 950 KG




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-convection oven for 10 trays 60 x 40 cm;
electric;
fp9 program control;
underframe for 8 trays;
yom - 2013
in very good working condition CONVECTION OVEN FOR 10 TRAYS 60 X 40 CM; ELECTRIC; FP9 PROGRAM CONTROL; UNDERFRAME FOR 8 TRAYS; YOM - 2013 IN VERY GOOD WORKING CONDITION
Vendedor: Rovita
Año de construcción: usado
Precio: used machinery auction RESALE 5.200 €
Ubicación: Land-weight approx.: 3600 kg<br/>dimensions (l x w x h) approx.: 5000 x 2250 x 2250 mm<br/>description: ? cnc machining center<br> ? serial number al2967<br> ? total installed power 18 kw<br> ? working area approx. 2600 x 900 mm<br> ? panel passage height 80 mm<br> ? travelling way x-axis: 3010 mm, travelling way y-axis: 1200 mm, travelling way z-axis: 115 mm<br> ? maximum travel speed in the axes direction x-y: 75-75 m/min<br> ? maximum programmable speed in axes direction x-y-z: 50-50-22 m/min<br> ? tool changer with 10 positions<br> ? main milling spindle with connection iso 30<br> ? secondary vertical milling spindle<br> ? saw unit to groove in x-axis direction<br> ? drilling head vertical x-axis: 9<br> ? drilling head vertical y-axis: 8<br> ? drilling head horizontal x-axis: 2 + 2<br> ? drilling head horizontal y-axis: 1 + 1<br> ? numerical control sea tria 7500<br> ? software windows/campus<br> ? 8 consoles with 2 vacuum suction cups each<br> ? vacuum pump becker kvt 2.100 with capacity 100 m3/h<br> ? the tools that appears in the photos are included WEIGHT APPROX.: 3600 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2250 X 2250 MM
DESCRIPTION: ? CNC MACHINING CENTER
? SERIAL NUMBER AL2967
? TOTAL INSTALLED POWER 18 KW
? WORKING AREA APPROX. 2600 X 900 MM
? PANEL PASSAGE HEIGHT 80 MM
? TRAVELLING WAY X-AXIS: 3010 MM, TRAVELLING WAY Y-AXIS: 1200 MM, TRAVELLING WAY Z-AXIS: 115 MM
? MAXIMUM TRAVEL SPEED IN THE AXES DIRECTION X-Y: 75-75 M/MIN
? MAXIMUM PROGRAMMABLE SPEED IN AXES DIRECTION X-Y-Z: 50-50-22 M/MIN
? TOOL CHANGER WITH 10 POSITIONS
? MAIN MILLING SPINDLE WITH CONNECTION ISO 30
? SECONDARY VERTICAL MILLING SPINDLE
? SAW UNIT TO GROOVE IN X-AXIS DIRECTION
? DRILLING HEAD VERTICAL X-AXIS: 9
? DRILLING HEAD VERTICAL Y-AXIS: 8
? DRILLING HEAD HORIZONTAL X-AXIS: 2 + 2
? DRILLING HEAD HORIZONTAL Y-AXIS: 1 + 1
? NUMERICAL CONTROL SEA TRIA 7500
? SOFTWARE WINDOWS/CAMPUS
? 8 CONSOLES WITH 2 VACUUM SUCTION CUPS EACH
? VACUUM PUMP BECKER KVT 2.100 WITH CAPACITY 100 M3/H
? THE TOOLS THAT APPEARS IN THE PHOTOS ARE INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 49.900 €
Ubicación: Land-haas | st-20y
cnc lathe

controls: haas
year of construction: 2012
machine number: 3093419
circulation diameter over bed: 806 mm
circulation ã? over bed slide: 527 mm
circulation ã? on reistock: 616 mm
bar passage: 64 mm
maximum speed of main spindle: 4,000 rpm
traverse paths: x - 236 mm / z - 533 mm / y - â± 51 mm

* spindle run time: only about 465 hours *.
* switch-on time: 2,751 hours *.

facilities:
cnc lathe with y axis
travel distances of 305 x 533 mm
swing by 806 mm
(22.4 kw) vector drive, 4,000 min-1
a2-6 spindle nose, 64 mm rod diameter
spindle orientation
automatic tool presetting
slat-band - conveyors
10 inch (254 mm) chuck maximum 3,400 rpm
hybrid turret with 12 tool stations (6vdi / 6 bot)
driven tool with higher torque with c-axis
befp9tnvfs
various vdi 40 pictures
approx. 3 axial-driven tool holder
approx. 3 radial-powered tool holder
approx. 16 tool holders
part catcher (workpiece max ã? 51.0 x 140 mm)
programmable hydraulic tailstock
high pressure coolant system approx. 21 bar
additional coolant filter system
15 "-colour lcd screen
memory lock keyswitch, usb connector and sync. tapping
coolant tank with pump (0,6 kw) and 182 litres capacity
lifting device
manual / documentation
machine parameters

other specifications on request

the machine can be visited by appointment

delivery ex location d 87477 main sulzmann mountain / free loading truck
delivery immediate / intermediate sales reserved HAAS | ST-20Y CNC LATHE CONTROLS: HAAS YEAR OF CONSTRUCTION: 2012 MACHINE NUMBER: 3093419 CIRCULATION DIAMETER OVER BED: 806 MM CIRCULATION &ATILDE;? OVER BED SLIDE: 527 MM CIRCULATION &ATILDE;? ON REISTOCK: 616 MM BAR PASSAGE: 64 MM MAXIMUM SPEED OF MAIN SPINDLE: 4,000 RPM TRAVERSE PATHS: X - 236 MM / Z - 533 MM / Y - &ACIRC;&PLUSMN; 51 MM * SPINDLE RUN TIME: ONLY ABOUT 465 HOURS *. * SWITCH-ON TIME: 2,751 HOURS *. FACILITIES: CNC LATHE WITH Y AXIS TRAVEL DISTANCES OF 305 X 533 MM SWING BY 806 MM (22.4 KW) VECTOR DRIVE, 4,000 MIN-1 A2-6 SPINDLE NOSE, 64 MM ROD DIAMETER SPINDLE ORIENTATION AUTOMATIC TOOL PRESETTING SLAT-BAND - CONVEYORS 10 INCH (254 MM) CHUCK MAXIMUM 3,400 RPM HYBRID TURRET WITH 12 TOOL STATIONS (6VDI / 6 BOT) DRIVEN TOOL WITH HIGHER TORQUE WITH C-AXIS BEFP9TNVFS VARIOUS VDI 40 PICTURES APPROX. 3 AXIAL-DRIVEN TOOL HOLDER APPROX. 3 RADIAL-POWERED TOOL HOLDER APPROX. 16 TOOL HOLDERS PART CATCHER (WORKPIECE MAX &ATILDE;? 51.0 X 140 MM) PROGRAMMABLE HYDRAULIC TAILSTOCK HIGH PRESSURE COOLANT SYSTEM APPROX. 21 BAR ADDITIONAL COOLANT FILTER SYSTEM 15 "-COLOUR LCD SCREEN MEMORY LOCK KEYSWITCH, USB CONNECTOR AND SYNC. TAPPING COOLANT TANK WITH PUMP (0,6 KW) AND 182 LITRES CAPACITY LIFTING DEVICE MANUAL / DOCUMENTATION MACHINE PARAMETERS OTHER SPECIFICATIONS ON REQUEST THE MACHINE CAN BE VISITED BY APPOINTMENT DELIVERY EX LOCATION D 87477 MAIN SULZMANN MOUNTAIN / FREE LOADING TRUCK DELIVERY IMMEDIATE / INTERMEDIATE SALES RESERVED
Vendedor: KISTNER GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 5.300 €
Ubicación: Land-weight approx.: 4000 kg<br/>cutting length: 3300 mm<br/>control: siemens s7 <br/>dimensions (l x w x h) approx.: 13000 x 2400 x 1600 mm<br/>cutting height: 75 mm<br/>main motor: 9,0 kw<br/>scoring saw: 1,1 kw<br/>setting measure approx (l x w x h): 8000 x 8000 x 2500 mm<br/>cutting depth: 3300 mm<br/>saw blade protection: 82 mm<br/>clamps piece: 6 piece<br/>main saw blade: 315 mm<br/>scoring saw blade: 200 mm<br/>air table: 3 <br/>saw carriage speed forward: 0-70  m/min<br/>saw carriage speed reverse: abgesenkt 130 m/min<br/>program fence speed forward: 25 m/min<br/>program fence speed reverse: 25 m/min<br/>total power approx: 13,1 kw<br/>description: scheer pa 4500 panel saw<br> - sliding device<br> - intake rollers<br> - label printing program<br> - strain - free cut<br> - the clamps can be completely lifted from behind for loading<br> - terme-label printer<br> - veneer finger stop manually (partly missing)<br> <br> <b>!! the feeding from behind is not part of the saw and is not included !!</b> WEIGHT APPROX.: 4000 KG
CUTTING LENGTH: 3300 MM
CONTROL: SIEMENS S7
DIMENSIONS (L X W X H) APPROX.: 13000 X 2400 X 1600 MM
CUTTING HEIGHT: 75 MM
MAIN MOTOR: 9,0 KW
SCORING SAW: 1,1 KW
SETTING MEASURE APPROX (L X W X H): 8000 X 8000 X 2500 MM
CUTTING DEPTH: 3300 MM
SAW BLADE PROTECTION: 82 MM
CLAMPS PIECE: 6 PIECE
MAIN SAW BLADE: 315 MM
SCORING SAW BLADE: 200 MM
AIR TABLE: 3
SAW CARRIAGE SPEED FORWARD: 0-70 M/MIN
SAW CARRIAGE SPEED REVERSE: ABGESENKT 130 M/MIN
PROGRAM FENCE SPEED FORWARD: 25 M/MIN
PROGRAM FENCE SPEED REVERSE: 25 M/MIN
TOTAL POWER APPROX: 13,1 KW
DESCRIPTION: SCHEER PA 4500 PANEL SAW
- SLIDING DEVICE
- INTAKE ROLLERS
- LABEL PRINTING PROGRAM
- STRAIN - FREE CUT
- THE CLAMPS CAN BE COMPLETELY LIFTED FROM BEHIND FOR LOADING
- TERME-LABEL PRINTER
- VENEER FINGER STOP MANUALLY (PARTLY MISSING)

!! THE FEEDING FROM BEHIND IS NOT PART OF THE SAW AND IS NOT INCLUDED !!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:

work area 3.000 x 1.500 x 115 mm
control siemens sinumerik 840 d
laser power 5,000 watts
maximum sheet thickness mild steel 25 mm
maximum sheet thickness stainless steel 20 mm
maximum sheet thickness aluminium 12 mm

standard equipment:

-closed machine frame with integrated laser unit
-trumpf laser tlf 5000
-laser unit: co2 laser, high-frequency maintenance-free turbo centrifugal blower, cooling unit, logbook function angeregt
-automatic pallet changer and longitudinal conveyor belt
-drives: gantry drive in combination with direct linear drives
-laser power control
-position laser diode
-hi-las high pressure cutting
-plasmasensorik pms
-automatic sheet metal outer edge detection
-programmable power cycles
-microweld
-automatic nozzle cleaning
-fast processing with sprintlas
-contourlas for making small holes
-cutting gas pressure setting can be programmed
-controlline capacitive height control and process control
-laser cutting head with 5 "lens
-laser cutting head with 7.5 "-lens"
-cutting head quick change facility
-automatic focus position adjustment of autolas plus
-oil spray safe thick sheet metal working
-automatic switch-off
-lighting of workroom
-control sin 840 d: open control on pc-based, easy to use, online help, diagnostics, maintenance logbook, technology data, tele-service
-shop floor programming
-security: mehrstrahlige photoelectric beam guidance is fully encapsulated and ventilated, monitoring system, multi chamber extraction and compact dust collector, cab
network connection: bnc/rj-45 network connection by installing via tele-service
-electrical equipment for three-phase 400 v / 50 hz
-colour: white structure lacquer ral 9002 / gentian blue ral 5010

advanced features:

-additional laser cutting head with a 3.75-inch lens
-process control system (pcs)
-pipe cutter of rotolas
-machine regularly serviced by trump!

(errors and omissions in the technical data, information and prices and subject to prior sale!) 


 TECHNICAL DATA: WORK AREA 3.000 X 1.500 X 115 MM CONTROL SIEMENS SINUMERIK 840 D LASER POWER 5,000 WATTS MAXIMUM SHEET THICKNESS MILD STEEL 25 MM MAXIMUM SHEET THICKNESS STAINLESS STEEL 20 MM MAXIMUM SHEET THICKNESS ALUMINIUM 12 MM STANDARD EQUIPMENT: -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -TRUMPF LASER TLF 5000 -LASER UNIT: CO2 LASER, HIGH-FREQUENCY MAINTENANCE-FREE TURBO CENTRIFUGAL BLOWER, COOLING UNIT, LOGBOOK FUNCTION ANGEREGT -AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR BELT -DRIVES: GANTRY DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES -LASER POWER CONTROL -POSITION LASER DIODE -HI-LAS HIGH PRESSURE CUTTING -PLASMASENSORIK PMS -AUTOMATIC SHEET METAL OUTER EDGE DETECTION -PROGRAMMABLE POWER CYCLES -MICROWELD -AUTOMATIC NOZZLE CLEANING -FAST PROCESSING WITH SPRINTLAS -CONTOURLAS FOR MAKING SMALL HOLES -CUTTING GAS PRESSURE SETTING CAN BE PROGRAMMED -CONTROLLINE CAPACITIVE HEIGHT CONTROL AND PROCESS CONTROL -LASER CUTTING HEAD WITH 5 "LENS -LASER CUTTING HEAD WITH 7.5 "-LENS" -CUTTING HEAD QUICK CHANGE FACILITY -AUTOMATIC FOCUS POSITION ADJUSTMENT OF AUTOLAS PLUS -OIL SPRAY SAFE THICK SHEET METAL WORKING -AUTOMATIC SWITCH-OFF -LIGHTING OF WORKROOM -CONTROL SIN 840 D: OPEN CONTROL ON PC-BASED, EASY TO USE, ONLINE HELP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE-SERVICE -SHOP FLOOR PROGRAMMING -SECURITY: MEHRSTRAHLIGE PHOTOELECTRIC BEAM GUIDANCE IS FULLY ENCAPSULATED AND VENTILATED, MONITORING SYSTEM, MULTI CHAMBER EXTRACTION AND COMPACT DUST COLLECTOR, CAB NETWORK CONNECTION: BNC/RJ-45 NETWORK CONNECTION BY INSTALLING VIA TELE-SERVICE -ELECTRICAL EQUIPMENT FOR THREE-PHASE 400 V / 50 HZ -COLOUR: WHITE STRUCTURE LACQUER RAL 9002 / GENTIAN BLUE RAL 5010 ADVANCED FEATURES: -ADDITIONAL LASER CUTTING HEAD WITH A 3.75-INCH LENS -PROCESS CONTROL SYSTEM (PCS) -PIPE CUTTER OF ROTOLAS -MACHINE REGULARLY SERVICED BY TRUMP! (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Ubicación: Land-computer-controlled, 24 diff. programs, 2 speeds, laminating, dividing and moulding combined in one machine,\r\ndougweight range 65 - 800 gr., cap. 750 - 6300 p./h\r\nproducing of soft- and hard dough, f.e. ciabatta, baguette\r\naccessories: 2 four cylinder-moulders\r\nincl. extender to mould extra-long COMPUTER-CONTROLLED, 24 DIFF. PROGRAMS, 2 SPEEDS, LAMINATING, DIVIDING AND MOULDING COMBINED IN ONE MACHINE,\R\NDOUGWEIGHT RANGE 65 - 800 GR., CAP. 750 - 6300 P./H\R\NPRODUCING OF SOFT- AND HARD DOUGH, F.E. CIABATTA, BAGUETTE\R\NACCESSORIES: 2 FOUR CYLINDER-MOULDERS\R\NINCL. EXTENDER TO MOULD EXTRA-LONG
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 19.900 €
Ubicación: Land-calibration and fine grinding machine, wide belt sander kã¼ndig duplex 1100 with elektronikschleifschuh and lacquer sanding package

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

a video of the current machine can be sent on request.

two tape contact roller with fine grinding unit with electronic links pressure bar 35 mm segment width.
drive motor 15 kw, infinitely variable via frequency converter
belt feed continuously adjustable from 3 to 15 m / min
feed belt still very handy
carpet with vacuum blower, this small parts can be kept safe
band blow-out on the fine grinding unit
dust brush at the outlet
variable edge control of the segments
lcd screen with the ability to save programs
max grinding width 1100 mm
constant grinding height 900 mm, this simple mounting of single - and outfeed tables or integration in schleifstrassen
workpiece height approx. 10 to 162 mm, you can also from approx. 3 mm grind, but without automatic thickness measurement
sanding belt size 1120 x 2000 mm
calibrating roller as grooved rubber cover graining settled
thickness measuring system with adjustable chip removal and enormatic with fully automatic thickness adjustment with feed firing that eliminates the continual measurement with the caliper
infeed and outfeed table with rollers
hood latch
exhaust connection 3x180mm, 1x135mm, 2x120mm, suction pipes are not available
operating instructions
without shown cord
very good condition from swiss operation
control is in french, but it is not a problem, i can also not french, had to operate the machine but no problems.
after painted in places

dimensions ca. 1550 x 1850 x 2000 mm (lxwxh). weight approx. 2700kg. height approx. 3200mm with fan, it can be mounted but also elsewhere.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". CALIBRATION AND FINE GRINDING MACHINE, WIDE BELT SANDER K&ATILDE;&FRAC14;NDIG DUPLEX 1100 WITH ELEKTRONIKSCHLEIFSCHUH AND LACQUER SANDING PACKAGE THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. TWO TAPE CONTACT ROLLER WITH FINE GRINDING UNIT WITH ELECTRONIC LINKS PRESSURE BAR 35 MM SEGMENT WIDTH. DRIVE MOTOR 15 KW, INFINITELY VARIABLE VIA FREQUENCY CONVERTER BELT FEED CONTINUOUSLY ADJUSTABLE FROM 3 TO 15 M / MIN FEED BELT STILL VERY HANDY CARPET WITH VACUUM BLOWER, THIS SMALL PARTS CAN BE KEPT SAFE BAND BLOW-OUT ON THE FINE GRINDING UNIT DUST BRUSH AT THE OUTLET VARIABLE EDGE CONTROL OF THE SEGMENTS LCD SCREEN WITH THE ABILITY TO SAVE PROGRAMS MAX GRINDING WIDTH 1100 MM CONSTANT GRINDING HEIGHT 900 MM, THIS SIMPLE MOUNTING OF SINGLE - AND OUTFEED TABLES OR INTEGRATION IN SCHLEIFSTRASSEN WORKPIECE HEIGHT APPROX. 10 TO 162 MM, YOU CAN ALSO FROM APPROX. 3 MM GRIND, BUT WITHOUT AUTOMATIC THICKNESS MEASUREMENT SANDING BELT SIZE 1120 X 2000 MM CALIBRATING ROLLER AS GROOVED RUBBER COVER GRAINING SETTLED THICKNESS MEASURING SYSTEM WITH ADJUSTABLE CHIP REMOVAL AND ENORMATIC WITH FULLY AUTOMATIC THICKNESS ADJUSTMENT WITH FEED FIRING THAT ELIMINATES THE CONTINUAL MEASUREMENT WITH THE CALIPER INFEED AND OUTFEED TABLE WITH ROLLERS HOOD LATCH EXHAUST CONNECTION 3X180MM, 1X135MM, 2X120MM, SUCTION PIPES ARE NOT AVAILABLE OPERATING INSTRUCTIONS WITHOUT SHOWN CORD VERY GOOD CONDITION FROM SWISS OPERATION CONTROL IS IN FRENCH, BUT IT IS NOT A PROBLEM, I CAN ALSO NOT FRENCH, HAD TO OPERATE THE MACHINE BUT NO PROBLEMS. AFTER PAINTED IN PLACES DIMENSIONS CA. 1550 X 1850 X 2000 MM (LXWXH). WEIGHT APPROX. 2700KG. HEIGHT APPROX. 3200MM WITH FAN, IT CAN BE MOUNTED BUT ALSO ELSEWHERE. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 12.250 EU€
Ubicación: Land-bandsaw stenner to cut veneers, fins and other wooden items. it has a mechanism for programming the thickness of the cut pieces. BANDSAW STENNER TO CUT VENEERS, FINS AND OTHER WOODEN ITEMS. IT HAS A MECHANISM FOR PROGRAMMING THE THICKNESS OF THE CUT PIECES.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-type displayed
table size 1200 x 300 mm.
transversal stroke 300 mm.
axis x 850 mm.
vertical stroke 500 mm.
type gear head
iso 50 cone
28-1600 rpm spindle speed.
spindle motor power 5 hp.
2120 kg weight.
year built 1974 TYPE DISPLAYED TABLE SIZE 1200 X 300 MM. TRANSVERSAL STROKE 300 MM. AXIS X 850 MM. VERTICAL STROKE 500 MM. TYPE GEAR HEAD ISO 50 CONE 28-1600 RPM SPINDLE SPEED. SPINDLE MOTOR POWER 5 HP. 2120 KG WEIGHT. YEAR BUILT 1974
Vendedor: B.M. MACCHINE UTENSILI srl
Año de construcción: usado
Ubicación: Land-internal diameter: ca. 250 <br/>grinding depth: 200 mm<br/>swing diameter: 440 mm<br/>control: fanuc 16 tb <br/>max. workpiece weight between centres: 150 kg<br/>spindle speeds: 1 - 1.000 u/min.<br/>c-axis for work spindle: rotation speed: max. 650 rpm<br/>weight of the machine ca.: 5.700 kg<br/>installation area: 5,2 x 4,0 m x 2,8 m mm<br/>internal grinding machine with external and face grinding device<br/>good condition - inspection under power possibl<br/>  <br/>werkpiece headstock over paper band filter<br/>- workpiece weight between centres max. 150 kg<br/>- speed range 1-1000 rpm, at c-axis 650 rpm<br/><br/>workpiece table<br/>- including air lift-off and hydraulic clamping <br/>- swivel range +/- 30°<br/><br/>internal grinding table<br/>- with four tool positions<br/>- indexing every 90°<br/>- swivel movement cnc-controlled<br/>    <br/>cross slide z/x:<br/>- cross axis x<br/>  travel 120 mm<br/>  feed speed 0.001 - 5000 mm/min<br/>- longitudinal axis z<br/>  travel 500 mm<br/>  feed speed 0.001 - 10000 mm/min<br/><br/>studer operating system release b<br/>- setup cycles operator-guided<br/>- machining cycles for diameter-, shoulder-, cone machining and <br/>  free contours (x/z)<br/>- automatic dressing including free disc shape<br/>- switch-on clock function<br/>- programmable robot cycle process<br/>    <br/>coolant device<br/>    for grinding and dressing, including coolant valve for<br/>    internal grinding cycle<br/><br/>frequency<br/>    30 kva, for driving 1-4 high-speed internal grinding spindles<br/><br/>including various accessories<br/>- three-jaw chuck rota s plus 250 - 62<br/>- 4 nos. collet chuck device including collet chucks<br/>- 1 external and 3 internal grinding spindles<br/>- 1 steady rest<br/>- coolant with paper filter<br/>- oil mist exhauster<br/>- documentation<br/><br/><br/><br/><br/> INTERNAL DIAMETER: CA. 250
GRINDING DEPTH: 200 MM
SWING DIAMETER: 440 MM
CONTROL: FANUC 16 TB
MAX. WORKPIECE WEIGHT BETWEEN CENTRES: 150 KG
SPINDLE SPEEDS: 1 - 1.000 U/MIN.
C-AXIS FOR WORK SPINDLE: ROTATION SPEED: MAX. 650 RPM
WEIGHT OF THE MACHINE CA.: 5.700 KG
INSTALLATION AREA: 5,2 X 4,0 M X 2,8 M MM
INTERNAL GRINDING MACHINE WITH EXTERNAL AND FACE GRINDING DEVICE
GOOD CONDITION - INSPECTION UNDER POWER POSSIBL

WERKPIECE HEADSTOCK OVER PAPER BAND FILTER
- WORKPIECE WEIGHT BETWEEN CENTRES MAX. 150 KG
- SPEED RANGE 1-1000 RPM, AT C-AXIS 650 RPM

WORKPIECE TABLE
- INCLUDING AIR LIFT-OFF AND HYDRAULIC CLAMPING
- SWIVEL RANGE +/- 30°

INTERNAL GRINDING TABLE
- WITH FOUR TOOL POSITIONS
- INDEXING EVERY 90°
- SWIVEL MOVEMENT CNC-CONTROLLED

CROSS SLIDE Z/X:
- CROSS AXIS X
TRAVEL 120 MM
FEED SPEED 0.001 - 5000 MM/MIN
- LONGITUDINAL AXIS Z
TRAVEL 500 MM
FEED SPEED 0.001 - 10000 MM/MIN

STUDER OPERATING SYSTEM RELEASE B
- SETUP CYCLES OPERATOR-GUIDED
- MACHINING CYCLES FOR DIAMETER-, SHOULDER-, CONE MACHINING AND
FREE CONTOURS (X/Z)
- AUTOMATIC DRESSING INCLUDING FREE DISC SHAPE
- SWITCH-ON CLOCK FUNCTION
- PROGRAMMABLE ROBOT CYCLE PROCESS

COOLANT DEVICE
FOR GRINDING AND DRESSING, INCLUDING COOLANT VALVE FOR
INTERNAL GRINDING CYCLE

FREQUENCY
30 KVA, FOR DRIVING 1-4 HIGH-SPEED INTERNAL GRINDING SPINDLES

INCLUDING VARIOUS ACCESSORIES
- THREE-JAW CHUCK ROTA S PLUS 250 - 62
- 4 NOS. COLLET CHUCK DEVICE INCLUDING COLLET CHUCKS
- 1 EXTERNAL AND 3 INTERNAL GRINDING SPINDLES
- 1 STEADY REST
- COOLANT WITH PAPER FILTER
- OIL MIST EXHAUSTER
- DOCUMENTATION




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Ubicación: Land-3 months la postpress warranty
excluding electronics

offer consists of:-gathering tower vac 100a
-stapling and folding spf-20a
-front cutter fc-20a
-short delivery sc-20

horizon vac-100a
suction air gathering machines

-technology: touch & work
-model: suction and blowing air gathering tower
-number of stations: 10 per gathering tower
-error prevention: false, double leaf and jams
-order storage: 9 memory locations for repeat orders
-expandability: up to 6 towers (60 stations)

programs:
-double cycle (nonstopbetrieb) - inject (1 x and 2 x) - brochure program
-block program
-selective gathering

-format: max 500x350mm; min. 148x120mm
-paper weight: 40-250 g / mâ²
-load capacity: 55 mm / station

-capacity: up to 9,500 records/h

-power: 230v/50 hz - 1, 86kw
-dimensions: 842 x 652 x 1, 961mm
-weight: 310kg

horizon spf-20a stapling and folding unit:

-format setting: fully automatic - din formats and standard types of folds: preset
-order memory: 12 memory slots for special formats + all din formats
-stitching heads: 2 - 4 stapling heads can be extended
-book opportunities: backstitch, block - corner stapling - ring eyelets stitching: possible with ring eyelets stitching heads

-entry format: max 500x350mm; 
min. container 180x120mm

-processing thickness: min. 2 sheets; max 22 sheets (80 g / m2)

-bracket distance: min. 73 mm
-wire diameter: 26-28
-speed: max 3,600 cycles/h

-power: 230v/50 hz - 0, 45kw
-dimensions: 2.710 x 810 x 1, 070mm
-weight: 490 kg horizon fc-20a front cutter:

-counter
-wrong paper eject

-format size: max 250x20mm; min. 85mm
-crop of format: max 20 mm
-processing thickness: min. 4 pages / max. 88 pages (80 g / m2)

-speed: maximum 3,400 brochures/h

-power: 230v/50 hz - 0, 2kw
-dimensions: 601 x 810 x 1, 070mm
-weight: 240 kg

on request, we can organize for you the following points:

packing, loading, transport (by ship or airplane) including customs clearance 3 MONTHS LA POSTPRESS WARRANTY EXCLUDING ELECTRONICS OFFER CONSISTS OF:-GATHERING TOWER VAC 100A -STAPLING AND FOLDING SPF-20A -FRONT CUTTER FC-20A -SHORT DELIVERY SC-20 HORIZON VAC-100A SUCTION AIR GATHERING MACHINES -TECHNOLOGY: TOUCH & WORK -MODEL: SUCTION AND BLOWING AIR GATHERING TOWER -NUMBER OF STATIONS: 10 PER GATHERING TOWER -ERROR PREVENTION: FALSE, DOUBLE LEAF AND JAMS -ORDER STORAGE: 9 MEMORY LOCATIONS FOR REPEAT ORDERS -EXPANDABILITY: UP TO 6 TOWERS (60 STATIONS) PROGRAMS: -DOUBLE CYCLE (NONSTOPBETRIEB) - INJECT (1 X AND 2 X) - BROCHURE PROGRAM -BLOCK PROGRAM -SELECTIVE GATHERING -FORMAT: MAX 500X350MM; MIN. 148X120MM -PAPER WEIGHT: 40-250 G / M&ACIRC;&SUP2; -LOAD CAPACITY: 55 MM / STATION -CAPACITY: UP TO 9,500 RECORDS/H -POWER: 230V/50 HZ - 1, 86KW -DIMENSIONS: 842 X 652 X 1, 961MM -WEIGHT: 310KG HORIZON SPF-20A STAPLING AND FOLDING UNIT: -FORMAT SETTING: FULLY AUTOMATIC - DIN FORMATS AND STANDARD TYPES OF FOLDS: PRESET -ORDER MEMORY: 12 MEMORY SLOTS FOR SPECIAL FORMATS + ALL DIN FORMATS -STITCHING HEADS: 2 - 4 STAPLING HEADS CAN BE EXTENDED -BOOK OPPORTUNITIES: BACKSTITCH, BLOCK - CORNER STAPLING - RING EYELETS STITCHING: POSSIBLE WITH RING EYELETS STITCHING HEADS -ENTRY FORMAT: MAX 500X350MM; MIN. CONTAINER 180X120MM -PROCESSING THICKNESS: MIN. 2 SHEETS; MAX 22 SHEETS (80 G / M2) -BRACKET DISTANCE: MIN. 73 MM -WIRE DIAMETER: 26-28 -SPEED: MAX 3,600 CYCLES/H -POWER: 230V/50 HZ - 0, 45KW -DIMENSIONS: 2.710 X 810 X 1, 070MM -WEIGHT: 490 KG HORIZON FC-20A FRONT CUTTER: -COUNTER -WRONG PAPER EJECT -FORMAT SIZE: MAX 250X20MM; MIN. 85MM -CROP OF FORMAT: MAX 20 MM -PROCESSING THICKNESS: MIN. 4 PAGES / MAX. 88 PAGES (80 G / M2) -SPEED: MAXIMUM 3,400 BROCHURES/H -POWER: 230V/50 HZ - 0, 2KW -DIMENSIONS: 601 X 810 X 1, 070MM -WEIGHT: 240 KG ON REQUEST, WE CAN ORGANIZE FOR YOU THE FOLLOWING POINTS: PACKING, LOADING, TRANSPORT (BY SHIP OR AIRPLANE) INCLUDING CUSTOMS CLEARANCE
Vendedor: LA-POSTPRESS Landauer Alexander
Año de construcción: usado
Precio: used machinery auction RESALE 2.700 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 4900 x 2600 x 2450 mm<br/>description: serial number al1/003221, total installed power approx. 16 kw, working area 2250 x 900 mm, panel passage height 180 mm, travelling way x-axis: 2535 mm, travelling way y-axis: 1080 mm, travelling way z-axis: 200 mm, maximum travel speed in the axes direction x-y: 67-67 m/min, maximum programmable speed in axes direction x-y-z: 50-45-22.50 m/min, main spindle 4.40 kw-max. 18000 rpm, saw unit, drilling head vertical x-axis: 6, drilling head vertical y-axis: 5, drilling head horizontal x-axis: 1 + 1, drilling head horizontal y-axis: 1 + 1, control pc-office num, xilog 3 mmi software, 6 consoles with 2 vacuum suction cups each, vacuum pump, the tools that appears in the photos are included WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 4900 X 2600 X 2450 MM
DESCRIPTION: SERIAL NUMBER AL1/003221, TOTAL INSTALLED POWER APPROX. 16 KW, WORKING AREA 2250 X 900 MM, PANEL PASSAGE HEIGHT 180 MM, TRAVELLING WAY X-AXIS: 2535 MM, TRAVELLING WAY Y-AXIS: 1080 MM, TRAVELLING WAY Z-AXIS: 200 MM, MAXIMUM TRAVEL SPEED IN THE AXES DIRECTION X-Y: 67-67 M/MIN, MAXIMUM PROGRAMMABLE SPEED IN AXES DIRECTION X-Y-Z: 50-45-22.50 M/MIN, MAIN SPINDLE 4.40 KW-MAX. 18000 RPM, SAW UNIT, DRILLING HEAD VERTICAL X-AXIS: 6, DRILLING HEAD VERTICAL Y-AXIS: 5, DRILLING HEAD HORIZONTAL X-AXIS: 1 + 1, DRILLING HEAD HORIZONTAL Y-AXIS: 1 + 1, CONTROL PC-OFFICE NUM, XILOG 3 MMI SOFTWARE, 6 CONSOLES WITH 2 VACUUM SUCTION CUPS EACH, VACUUM PUMP, THE TOOLS THAT APPEARS IN THE PHOTOS ARE INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-3 months la postpress warranty
excluding electronics

comprising:

horizon afc-546 act
6 - pocket folding machine

-technology: touch & work
-folding roller setting: automatically

-memory types of folds:
17 pre-programmed standard folding types
-order memory:
100 memory locations for repeat orders

-functioning swords: fully automatic

-format: maximum 540 x 760 mm, min. 120 x 172 mm
-paper weight: 40-250 g / mâ²

-performance: maximum 40,000 cycles/h

-pile height: max. 650 mm

-electricity: 400v / 50 hz - 2, 7kw
-dimensions: 2.780 1.050 x 1, 680mm
-weight: 1,350 kg

on request, we can organize for you the following points:

packing, loading, transport (by ship or airplane) including customs clearance 3 MONTHS LA POSTPRESS WARRANTY EXCLUDING ELECTRONICS COMPRISING: HORIZON AFC-546 ACT 6 - POCKET FOLDING MACHINE -TECHNOLOGY: TOUCH & WORK -FOLDING ROLLER SETTING: AUTOMATICALLY -MEMORY TYPES OF FOLDS: 17 PRE-PROGRAMMED STANDARD FOLDING TYPES -ORDER MEMORY: 100 MEMORY LOCATIONS FOR REPEAT ORDERS -FUNCTIONING SWORDS: FULLY AUTOMATIC -FORMAT: MAXIMUM 540 X 760 MM, MIN. 120 X 172 MM -PAPER WEIGHT: 40-250 G / M&ACIRC;&SUP2; -PERFORMANCE: MAXIMUM 40,000 CYCLES/H -PILE HEIGHT: MAX. 650 MM -ELECTRICITY: 400V / 50 HZ - 2, 7KW -DIMENSIONS: 2.780 1.050 X 1, 680MM -WEIGHT: 1,350 KG ON REQUEST, WE CAN ORGANIZE FOR YOU THE FOLLOWING POINTS: PACKING, LOADING, TRANSPORT (BY SHIP OR AIRPLANE) INCLUDING CUSTOMS CLEARANCE
Vendedor: LA-POSTPRESS Landauer Alexander
Año de construcción: usado
Precio: used machinery auction RESALE 2.600 €
Ubicación: Land-weight approx.: 1800 kg<br/>dimensions (l x w x h) approx.: 2900 x 4600 x 1000 mm<br/>description: monolithic glass cutting, 3-18 mm, cutting speed 100 mm / minute without grinding, optimization program optima, supply voltage: 380 v, rated power: 2.3 kw, glass breaking edge (bar for glass breaking) WEIGHT APPROX.: 1800 KG
DIMENSIONS (L X W X H) APPROX.: 2900 X 4600 X 1000 MM
DESCRIPTION: MONOLITHIC GLASS CUTTING, 3-18 MM, CUTTING SPEED 100 MM / MINUTE WITHOUT GRINDING, OPTIMIZATION PROGRAM OPTIMA, SUPPLY VOLTAGE: 380 V, RATED POWER: 2.3 KW, GLASS BREAKING EDGE (BAR FOR GLASS BREAKING)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-guillotine
wohlenberg
model	92 mcs2tv
year       1988
cutting length	920 mm
details	airtable
 	large sidetable left + right
 	photocells
 	digital program mcs with monitor
available	direct



 GUILLOTINE WOHLENBERG MODEL 92 MCS2TV YEAR 1988 CUTTING LENGTH 920 MM DETAILS AIRTABLE LARGE SIDETABLE LEFT + RIGHT PHOTOCELLS DIGITAL PROGRAM MCS WITH MONITOR AVAILABLE DIRECT
Vendedor: ITK Graphic Machinery
Año de construcción: usado
Precio: used machinery auction RESALE 7.500 €
Ubicación: Land-weight approx.: 3100 kg<br/>dimensions (l x w x h) approx.: 5900 x 2600 x 2070 mm<br/>description: ? cnc machining center<br> ? serial number al1/003093<br> ? working area approx. 3000 x 920 mm<br> ? panel passage height 180 mm<br> ? travelling way x-axis: 3290 mm, travelling way y-axis: 1180 mm, travelling way z-axis: 200 mm<br> ? maximum travel speed in the axes direction x-y: 67-67 m/min<br> ? maximum programmable speed in axes direction x-y-z: 50-45-22.5 m/min<br> ? main spindle with connection iso 30<br> ? drilling head vertical x-axis: 6<br> ? drilling head vertical y-axis: 5<br> ? drilling head horizontal x-axis: 2 + 2<br> ? drilling head horizontal y-axis: 1 + 1<br> ? automatic lubrication<br> ? numerical control esa kvara<br> ? 6 consoles with 3 vacuum suction cups each<br> ? vacuum pump rietschle vta 100<br> ? the tools that appears in the photos are included WEIGHT APPROX.: 3100 KG
DIMENSIONS (L X W X H) APPROX.: 5900 X 2600 X 2070 MM
DESCRIPTION: ? CNC MACHINING CENTER
? SERIAL NUMBER AL1/003093
? WORKING AREA APPROX. 3000 X 920 MM
? PANEL PASSAGE HEIGHT 180 MM
? TRAVELLING WAY X-AXIS: 3290 MM, TRAVELLING WAY Y-AXIS: 1180 MM, TRAVELLING WAY Z-AXIS: 200 MM
? MAXIMUM TRAVEL SPEED IN THE AXES DIRECTION X-Y: 67-67 M/MIN
? MAXIMUM PROGRAMMABLE SPEED IN AXES DIRECTION X-Y-Z: 50-45-22.5 M/MIN
? MAIN SPINDLE WITH CONNECTION ISO 30
? DRILLING HEAD VERTICAL X-AXIS: 6
? DRILLING HEAD VERTICAL Y-AXIS: 5
? DRILLING HEAD HORIZONTAL X-AXIS: 2 + 2
? DRILLING HEAD HORIZONTAL Y-AXIS: 1 + 1
? AUTOMATIC LUBRICATION
? NUMERICAL CONTROL ESA KVARA
? 6 CONSOLES WITH 3 VACUUM SUCTION CUPS EACH
? VACUUM PUMP RIETSCHLE VTA 100
? THE TOOLS THAT APPEARS IN THE PHOTOS ARE INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-electronic cut-off saw bottene model r550 at movable stroke, composed by:
- motorized rollers conveyor for loading, length 4 mt, useful width about 350mm
- machine body with:
* blade d=550mm, cutting actioning with double push-button actioned from the worker
* electronic programming, computer installed new from bottene manufacturer on september 2018
- motorized rollers conveyor for unloading, length about 7 mt, useful width about 350mm, with:
* movable stroke at electronic managing
* 15 side unloader with motorized chains + idle wheels supports
* possibility to select 3 unloading zone, from working cycle programming
overall dimensions when installed about mt 12 x 2
machine body heigth h=2,3 mt about
heigth of working plane from floor h=1230 mm
machine at ce norms. ELECTRONIC CUT-OFF SAW BOTTENE MODEL R550 AT MOVABLE STROKE, COMPOSED BY: - MOTORIZED ROLLERS CONVEYOR FOR LOADING, LENGTH 4 MT, USEFUL WIDTH ABOUT 350MM - MACHINE BODY WITH: * BLADE D=550MM, CUTTING ACTIONING WITH DOUBLE PUSH-BUTTON ACTIONED FROM THE WORKER * ELECTRONIC PROGRAMMING, COMPUTER INSTALLED NEW FROM BOTTENE MANUFACTURER ON SEPTEMBER 2018 - MOTORIZED ROLLERS CONVEYOR FOR UNLOADING, LENGTH ABOUT 7 MT, USEFUL WIDTH ABOUT 350MM, WITH: * MOVABLE STROKE AT ELECTRONIC MANAGING * 15 SIDE UNLOADER WITH MOTORIZED CHAINS + IDLE WHEELS SUPPORTS * POSSIBILITY TO SELECT 3 UNLOADING ZONE, FROM WORKING CYCLE PROGRAMMING OVERALL DIMENSIONS WHEN INSTALLED ABOUT MT 12 X 2 MACHINE BODY HEIGTH H=2,3 MT ABOUT HEIGTH OF WORKING PLANE FROM FLOOR H=1230 MM MACHINE AT CE NORMS.
Vendedor: Baldin SRL
Año de construcción: usado
Precio: used machinery auction RESALE 6.500 €
Ubicación: Land-serial number: 62036 <br/>weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 5200 x 2300 x 2100 mm<br/>description: serial number 62036, cnc control, is with 3 axes, main spindle approx. 6,8 kw, working range x-ahs 2700 mm, y-axis for points 1204 mm, y-axis for milling 1144 mm, maximum workable plate thickness 114 mm , max. pre-programmable speed x-axis 75 u / minute, y-axis 75 u / minute, z-axis 5 u / minute, max. turning speed 4000 rpm, circular blade / grooving saw 180 mm diameter, SERIAL NUMBER: 62036
WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 5200 X 2300 X 2100 MM
DESCRIPTION: SERIAL NUMBER 62036, CNC CONTROL, IS WITH 3 AXES, MAIN SPINDLE APPROX. 6,8 KW, WORKING RANGE X-AHS 2700 MM, Y-AXIS FOR POINTS 1204 MM, Y-AXIS FOR MILLING 1144 MM, MAXIMUM WORKABLE PLATE THICKNESS 114 MM , MAX. PRE-PROGRAMMABLE SPEED X-AXIS 75 U / MINUTE, Y-AXIS 75 U / MINUTE, Z-AXIS 5 U / MINUTE, MAX. TURNING SPEED 4000 RPM, CIRCULAR BLADE / GROOVING SAW 180 MM DIAMETER,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-labeling machine krones multimodule ii psl, 55.000 bph  
  
this labeling machine was manufactured in year 2010 by krones and it has been operated very limited hours till january 2014. it has six plug-in type aps (autarkic pressure sensitive) 4-spender labeling stations for pressure sensitive self-adhesive film labels and tree plug-in type gold clue paper labeling stations. the capacity of this multimodule labeler is upto 55000 bph in 0.33 and 0.50 liter glass bottles. paper labels to be placed on front-back-neck of a bottle. each container plate on the container table is powered by a computer-controlled servo motor. the bottle rotations required for rolling on the labels are camera controlled and conducted according to a set program. when changing over to a new type label, no mechanical cam needs to be changed. multimodule is operated from a touch screen which contains also a comprehensive diagnostic functions and detailed malfunctioning warnings. 
 
the machine was dismantled in 2016 very professionally under the supervision of krones and it has original krones transport support frame for transportation. labeling machine was in line with krones tree section bottle air dryer and krones label & filling level inspector checkmat which are available and can be sold at separate price. note: date coder is not a part of scope.  
 
technical data
manufacturer                          krones ag
type                                        multimodule ii psl 2400-60-125.6 
manufacturing year                 2010
total operating hour               approx. 12000
krones serial nr                       k 408-179 
capacity                                  55 000 bph 
number of stations                 60 
carousel diameter                   2400 mm
pitch                                        125.6 mm  
stations                                   6 stations for plastic for self-adhesive ps labels
                                                3 stations for paper labels, gold clue
control plc                            siemens s7-300 

optional checkmat                 serial no k 731h47
optional bottle dryer             krones linadry s with 3 modules  

 LABELING MACHINE KRONES MULTIMODULE II PSL, 55.000 BPH THIS LABELING MACHINE WAS MANUFACTURED IN YEAR 2010 BY KRONES AND IT HAS BEEN OPERATED VERY LIMITED HOURS TILL JANUARY 2014. IT HAS SIX PLUG-IN TYPE APS (AUTARKIC PRESSURE SENSITIVE) 4-SPENDER LABELING STATIONS FOR PRESSURE SENSITIVE SELF-ADHESIVE FILM LABELS AND TREE PLUG-IN TYPE GOLD CLUE PAPER LABELING STATIONS. THE CAPACITY OF THIS MULTIMODULE LABELER IS UPTO 55000 BPH IN 0.33 AND 0.50 LITER GLASS BOTTLES. PAPER LABELS TO BE PLACED ON FRONT-BACK-NECK OF A BOTTLE. EACH CONTAINER PLATE ON THE CONTAINER TABLE IS POWERED BY A COMPUTER-CONTROLLED SERVO MOTOR. THE BOTTLE ROTATIONS REQUIRED FOR ROLLING ON THE LABELS ARE CAMERA CONTROLLED AND CONDUCTED ACCORDING TO A SET PROGRAM. WHEN CHANGING OVER TO A NEW TYPE LABEL, NO MECHANICAL CAM NEEDS TO BE CHANGED. MULTIMODULE IS OPERATED FROM A TOUCH SCREEN WHICH CONTAINS ALSO A COMPREHENSIVE DIAGNOSTIC FUNCTIONS AND DETAILED MALFUNCTIONING WARNINGS. THE MACHINE WAS DISMANTLED IN 2016 VERY PROFESSIONALLY UNDER THE SUPERVISION OF KRONES AND IT HAS ORIGINAL KRONES TRANSPORT SUPPORT FRAME FOR TRANSPORTATION. LABELING MACHINE WAS IN LINE WITH KRONES TREE SECTION BOTTLE AIR DRYER AND KRONES LABEL & FILLING LEVEL INSPECTOR CHECKMAT WHICH ARE AVAILABLE AND CAN BE SOLD AT SEPARATE PRICE. NOTE: DATE CODER IS NOT A PART OF SCOPE. TECHNICAL DATA MANUFACTURER KRONES AG TYPE MULTIMODULE II PSL 2400-60-125.6 MANUFACTURING YEAR 2010 TOTAL OPERATING HOUR APPROX. 12000 KRONES SERIAL NR K 408-179 CAPACITY 55 000 BPH NUMBER OF STATIONS 60 CAROUSEL DIAMETER 2400 MM PITCH 125.6 MM STATIONS 6 STATIONS FOR PLASTIC FOR SELF-ADHESIVE PS LABELS 3 STATIONS FOR PAPER LABELS, GOLD CLUE CONTROL PLC SIEMENS S7-300 OPTIONAL CHECKMAT SERIAL NO K 731H47 OPTIONAL BOTTLE DRYER KRONES LINADRY S WITH 3 MODULES
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 13.400 €
Ubicación: Land-weight approx.: 6500 kg<br/>dimensions (l x w x h) approx.: 11700 x 7100 x 2000 mm<br/>description: serial number ga1 / 0024398, perfect condition, cutting height 115 mm, cutting length 4500 mm, main saw blade max. 420 mm, air cushion tables 4, scoring saw blade max. 200 mm, program feed advance 0 to 20 m / min, lifting table 4500 x 2200 mm, collets 9 pieces, saw carriage feed 5 to 150 m / min, main motor 14.7 kw, dimensions 11700 x 7100 x 2000 mm, weight 6500 kg WEIGHT APPROX.: 6500 KG
DIMENSIONS (L X W X H) APPROX.: 11700 X 7100 X 2000 MM
DESCRIPTION: SERIAL NUMBER GA1 / 0024398, PERFECT CONDITION, CUTTING HEIGHT 115 MM, CUTTING LENGTH 4500 MM, MAIN SAW BLADE MAX. 420 MM, AIR CUSHION TABLES 4, SCORING SAW BLADE MAX. 200 MM, PROGRAM FEED ADVANCE 0 TO 20 M / MIN, LIFTING TABLE 4500 X 2200 MM, COLLETS 9 PIECES, SAW CARRIAGE FEED 5 TO 150 M / MIN, MAIN MOTOR 14.7 KW, DIMENSIONS 11700 X 7100 X 2000 MM, WEIGHT 6500 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-combined stamping/lateral part/slitting line for the manufacture of perforated sheets, used
â â  combined punching / cut to length / slitting / perforating line for sheets, used

consists of:

(1) double upright eccentric punch press, used double column excentric stamping press, used, type / type: pzkwl 125x1200s/hk year / year of make: 1998 manufacturer / make:                                                   paul mã¼ller gmbh

pressing power / rated pressure: 125 t
table / table: 1150 mm x 820 mm
table width: 1200 mm
band thickness / thickn. of-band: max. 2 mm ram / ram size: 1000 x 680 mm
stroke / stroke: 50 mm
plunger strokes in idle /.
       number of strokes at idle operation: 60 per min
stroke adjustment / adjustment of stroke: 50 mm
installation height / shut height: 450 mm
continuity betw. the stands: 1200 mm

tappet adjustment / adjustment of slide: 80 mm
 
power / rated power: 7,5 kw
weight / weight: 17t

electron. roll feed, programmable, second-hand
 roller feeder, programmable, used

type / type: wel-x-d year / year of make: 1998 manufacturer / make: paul mã¼ller gmbh
feed length: 0.1... 6000 mm
material width / width of belt: 1000 mm
band thickness / thickn. of-band: max. 2 mm
feed / feeds: min. 0.1... 6000 mm

vorschubgeschw. / speed of feed: 100...  40000 mm / min
feed step / step feed: min. 0.1 mm
feed accuracy.                                            + / - 0.1 mm
power / rated power: inlet / input: 5 kw
                                                                                outlet / output 8 kw
weight / weight: 1, t

rolling scissors, discharge side, used
       used slitter shearer,
type / model: ras 59.50
make: ras germany
year / year of make: 1998 material width / width of band: max 1500 mm
strip width / width of slitting strip: min. 40 mm
quick cutting / slitting speed: 13... 29 m / min
diameter of roller blades / diam. of slitter rollers: 220 mm
band thickness / thickn. of-band: max. 2 mm
weight / weight: 0.9 t

(3) lateral shear, used / cut to length shear, used, ex works

type / model: mt 100 year / year of make: 1998 serial / make. : schechtel tape thickness / thickn. of band 0.5... 2 mm
material width / width of band: 1040 mm
band thickness / thickn. of-band: 0.5... 2 mm (steel) 3 mm aluminium
                                                                               1.2 mm stainless steel / stainless steel
number / number of strokes: 45 per min
power / rated power: 2,2 kw
weight / weight: 0.61 t

(4) abwickelspreidorn used reel, /.
         spec expanding mandrel-reel, used type / model: saw / vim 1000
make: schechtl
capacity / weight of coils to be load: 2 t
coil width / width of coil: 0.. 1000 mm bundauã?endurchm. / external diam of coil 1400... 1500 mm
inside clamping range / internal slide. of coil: 450... 550 mm
connected load / connection value: 0.75 kw

the system is designed for the manufacture of perforated metal sheets or steel strips.
the sheets or steel strips are used e.g. as bird guard on rooftops, also can this line all kinds of plates or tapes made be, where a screen perforation of the plates must be produced.

COMBINED STAMPING/LATERAL PART/SLITTING LINE FOR THE MANUFACTURE OF PERFORATED SHEETS, USED &ACIRC;&NBSP;&ACIRC;&NBSP; COMBINED PUNCHING / CUT TO LENGTH / SLITTING / PERFORATING LINE FOR SHEETS, USED CONSISTS OF: (1) DOUBLE UPRIGHT ECCENTRIC PUNCH PRESS, USED DOUBLE COLUMN EXCENTRIC STAMPING PRESS, USED, TYPE / TYPE: PZKWL 125X1200S/HK YEAR / YEAR OF MAKE: 1998 MANUFACTURER / MAKE: PAUL M&ATILDE;&FRAC14;LLER GMBH PRESSING POWER / RATED PRESSURE: 125 T TABLE / TABLE: 1150 MM X 820 MM TABLE WIDTH: 1200 MM BAND THICKNESS / THICKN. OF-BAND: MAX. 2 MM RAM / RAM SIZE: 1000 X 680 MM STROKE / STROKE: 50 MM PLUNGER STROKES IN IDLE /. NUMBER OF STROKES AT IDLE OPERATION: 60 PER MIN STROKE ADJUSTMENT / ADJUSTMENT OF STROKE: 50 MM INSTALLATION HEIGHT / SHUT HEIGHT: 450 MM CONTINUITY BETW. THE STANDS: 1200 MM TAPPET ADJUSTMENT / ADJUSTMENT OF SLIDE: 80 MM POWER / RATED POWER: 7,5 KW WEIGHT / WEIGHT: 17T ELECTRON. ROLL FEED, PROGRAMMABLE, SECOND-HAND ROLLER FEEDER, PROGRAMMABLE, USED TYPE / TYPE: WEL-X-D YEAR / YEAR OF MAKE: 1998 MANUFACTURER / MAKE: PAUL M&ATILDE;&FRAC14;LLER GMBH FEED LENGTH: 0.1... 6000 MM MATERIAL WIDTH / WIDTH OF BELT: 1000 MM BAND THICKNESS / THICKN. OF-BAND: MAX. 2 MM FEED / FEEDS: MIN. 0.1... 6000 MM VORSCHUBGESCHW. / SPEED OF FEED: 100... 40000 MM / MIN FEED STEP / STEP FEED: MIN. 0.1 MM FEED ACCURACY. + / - 0.1 MM POWER / RATED POWER: INLET / INPUT: 5 KW OUTLET / OUTPUT 8 KW WEIGHT / WEIGHT: 1, T ROLLING SCISSORS, DISCHARGE SIDE, USED USED SLITTER SHEARER, TYPE / MODEL: RAS 59.50 MAKE: RAS GERMANY YEAR / YEAR OF MAKE: 1998 MATERIAL WIDTH / WIDTH OF BAND: MAX 1500 MM STRIP WIDTH / WIDTH OF SLITTING STRIP: MIN. 40 MM QUICK CUTTING / SLITTING SPEED: 13... 29 M / MIN DIAMETER OF ROLLER BLADES / DIAM. OF SLITTER ROLLERS: 220 MM BAND THICKNESS / THICKN. OF-BAND: MAX. 2 MM WEIGHT / WEIGHT: 0.9 T (3) LATERAL SHEAR, USED / CUT TO LENGTH SHEAR, USED, EX WORKS TYPE / MODEL: MT 100 YEAR / YEAR OF MAKE: 1998 SERIAL / MAKE. : SCHECHTEL TAPE THICKNESS / THICKN. OF BAND 0.5... 2 MM MATERIAL WIDTH / WIDTH OF BAND: 1040 MM BAND THICKNESS / THICKN. OF-BAND: 0.5... 2 MM (STEEL) 3 MM ALUMINIUM 1.2 MM STAINLESS STEEL / STAINLESS STEEL NUMBER / NUMBER OF STROKES: 45 PER MIN POWER / RATED POWER: 2,2 KW WEIGHT / WEIGHT: 0.61 T (4) ABWICKELSPREIDORN USED REEL, /. SPEC EXPANDING MANDREL-REEL, USED TYPE / MODEL: SAW / VIM 1000 MAKE: SCHECHTL CAPACITY / WEIGHT OF COILS TO BE LOAD: 2 T COIL WIDTH / WIDTH OF COIL: 0.. 1000 MM BUNDAU&ATILDE;?ENDURCHM. / EXTERNAL DIAM OF COIL 1400... 1500 MM INSIDE CLAMPING RANGE / INTERNAL SLIDE. OF COIL: 450... 550 MM CONNECTED LOAD / CONNECTION VALUE: 0.75 KW THE SYSTEM IS DESIGNED FOR THE MANUFACTURE OF PERFORATED METAL SHEETS OR STEEL STRIPS. THE SHEETS OR STEEL STRIPS ARE USED E.G. AS BIRD GUARD ON ROOFTOPS, ALSO CAN THIS LINE ALL KINDS OF PLATES OR TAPES MADE BE, WHERE A SCREEN PERFORATION OF THE PLATES MUST BE PRODUCED.
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-semi automatic edge bander\r\nmake: vitap\r\ntype: fusion\r\nnew machine\r\n\r\ntechnical datas:\r\n- for shaped concave, convex  and stright panels 10-60 mm (edging)\r\nthickness 1-3 mm band thickness\r\n\r\ntefloned gluing station, kg1\r\n- quick disassembly system\r\n- glue and tape application on big and small shaped panels\r\n- equipped with glue pot with 1 kg capacity\r\n- 2 rollers to copy the shape of the piece\r\n-1 tilting support roller to enable the exit of the panel after banding\r\n- glue application amount is adjusted via a knob\r\n- set up of the glue temperature\r\n- automatic guillotine for coiled material up to 3 mm x 45 mm\r\n\r\nthree kind of works:\r\n-encoder\r\n-encoder + laser\r\n-encoder to overtake the board to cut it and to heat it\r\n\r\n- new laser system for precision cutting to band closed peaces \r\n- plc to set the lenght and the cut of the tape (by means of an encoder) for open and closed pieces;\r\n- high definition laser to make an easy programmation of the cut for closed pieces with no need of measuring the piece;\r\n- slowing-down feeding speed by foot pedal and laser with external potentiometer and 0,37 motor\r\n- color touch screen 7\r\n- on/off automatic feeder of the panel\r\n- raisable working table for small panels\r\n- utilizes 3 x 500 w heating elements with electronic temperature control via thermoregulator \r\n- reinforced arm \r\n- ce standards \r\n\r\noptions:\r\nglue feeder with sensor + tefloned gluing station for (pur glue) kg 0,5\r\ntefloned gluing station for (pur glue) kg 0,5\r\ntefloned gluing station for (eva glue) kg 1\r\nmanual end-cutter\r\nmanual system for glue scraping\r\nwide shoulder roller to ensure better adherence\r\nadditional lower roller with support to ensure better adherence\r\nrectangular work plan for executing of big panels\r\nwork plan round diameter 300 mm\r\nwork plan round diameter 125 mm\r\nheating system\r\n SEMI AUTOMATIC EDGE BANDER\R\NMAKE: VITAP\R\NTYPE: FUSION\R\NNEW MACHINE\R\N\R\NTECHNICAL DATAS:\R\N- FOR SHAPED CONCAVE, CONVEX AND STRIGHT PANELS 10-60 MM (EDGING)\R\NTHICKNESS 1-3 MM BAND THICKNESS\R\N\R\NTEFLONED GLUING STATION, KG1\R\N- QUICK DISASSEMBLY SYSTEM\R\N- GLUE AND TAPE APPLICATION ON BIG AND SMALL SHAPED PANELS\R\N- EQUIPPED WITH GLUE POT WITH 1 KG CAPACITY\R\N- 2 ROLLERS TO COPY THE SHAPE OF THE PIECE\R\N-1 TILTING SUPPORT ROLLER TO ENABLE THE EXIT OF THE PANEL AFTER BANDING\R\N- GLUE APPLICATION AMOUNT IS ADJUSTED VIA A KNOB\R\N- SET UP OF THE GLUE TEMPERATURE\R\N- AUTOMATIC GUILLOTINE FOR COILED MATERIAL UP TO 3 MM X 45 MM\R\N\R\NTHREE KIND OF WORKS:\R\N-ENCODER\R\N-ENCODER + LASER\R\N-ENCODER TO OVERTAKE THE BOARD TO CUT IT AND TO HEAT IT\R\N\R\N- NEW LASER SYSTEM FOR PRECISION CUTTING TO BAND CLOSED PEACES \R\N- PLC TO SET THE LENGHT AND THE CUT OF THE TAPE (BY MEANS OF AN ENCODER) FOR OPEN AND CLOSED PIECES;\R\N- HIGH DEFINITION LASER TO MAKE AN EASY PROGRAMMATION OF THE CUT FOR CLOSED PIECES WITH NO NEED OF MEASURING THE PIECE;\R\N- SLOWING-DOWN FEEDING SPEED BY FOOT PEDAL AND LASER WITH EXTERNAL POTENTIOMETER AND 0,37 MOTOR\R\N- COLOR TOUCH SCREEN 7\R\N- ON/OFF AUTOMATIC FEEDER OF THE PANEL\R\N- RAISABLE WORKING TABLE FOR SMALL PANELS\R\N- UTILIZES 3 X 500 W HEATING ELEMENTS WITH ELECTRONIC TEMPERATURE CONTROL VIA THERMOREGULATOR \R\N- REINFORCED ARM \R\N- CE STANDARDS \R\N\R\NOPTIONS:\R\NGLUE FEEDER WITH SENSOR + TEFLONED GLUING STATION FOR (PUR GLUE) KG 0,5\R\NTEFLONED GLUING STATION FOR (PUR GLUE) KG 0,5\R\NTEFLONED GLUING STATION FOR (EVA GLUE) KG 1\R\NMANUAL END-CUTTER\R\NMANUAL SYSTEM FOR GLUE SCRAPING\R\NWIDE SHOULDER ROLLER TO ENSURE BETTER ADHERENCE\R\NADDITIONAL LOWER ROLLER WITH SUPPORT TO ENSURE BETTER ADHERENCE\R\NRECTANGULAR WORK PLAN FOR EXECUTING OF BIG PANELS\R\NWORK PLAN ROUND DIAMETER 300 MM\R\NWORK PLAN ROUND DIAMETER 125 MM\R\NHEATING SYSTEM\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-long cutting saw / miter saw, used
fabr.: separating hunter type: lpc 110/400
year / year: 1989
saw blade diameter / diameter of circular blade: 360 mm
cutting area: rectangular: 110-400 mm round / round110 mm flat / flat 400 mm cutting angle / cutting angle:... 90 â°
cutting speed / cutting speed: 6 speeds:
                                                16/32 20/40 / 25/50 m / min motor pole shift bar / drive: 1500/3000 rpm. 
                                                 1.5 / 2 kw dimensions 1170 x 1210 x 1480 mm weight approx. 900 kg specification: with roller / with roller feeder LONG CUTTING SAW / MITER SAW, USED FABR.: SEPARATING HUNTER TYPE: LPC 110/400 YEAR / YEAR: 1989 SAW BLADE DIAMETER / DIAMETER OF CIRCULAR BLADE: 360 MM CUTTING AREA: RECTANGULAR: 110-400 MM ROUND / ROUND110 MM FLAT / FLAT 400 MM CUTTING ANGLE / CUTTING ANGLE:... 90 &ACIRC;&DEG; CUTTING SPEED / CUTTING SPEED: 6 SPEEDS: 16/32 20/40 / 25/50 M / MIN MOTOR POLE SHIFT BAR / DRIVE: 1500/3000 RPM. 1.5 / 2 KW DIMENSIONS 1170 X 1210 X 1480 MM WEIGHT APPROX. 900 KG SPECIFICATION: WITH ROLLER / WITH ROLLER FEEDER
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-: 200 kn<br/>stroke length max.: 200 mm<br/>working feed: 10 mm/sec<br/>return speed: 20 mm/sec<br/>: 480x1060 mm<br/>work height max.: 900 mm<br/>toolpiece height max.: 200 mm<br/>total power requirement: 2,2 kw<br/>: 200x12 mm<br/>bending capacity max. - round: 48x4,0 mm<br/>weight: 500 kg<br/>overall size: 1010x480x1120 mm<br/><br/><br/><br/><br/> : 200 KN
STROKE LENGTH MAX.: 200 MM
WORKING FEED: 10 MM/SEC
RETURN SPEED: 20 MM/SEC
: 480X1060 MM
WORK HEIGHT MAX.: 900 MM
TOOLPIECE HEIGHT MAX.: 200 MM
TOTAL POWER REQUIREMENT: 2,2 KW
: 200X12 MM
BENDING CAPACITY MAX. - ROUND: 48X4,0 MM
WEIGHT: 500 KG
OVERALL SIZE: 1010X480X1120 MM




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-control heidenhain... tnc 530
spindle diameter... 130mm
x axis... 4000mm
y axis... 2500mm
spindle speed... 0-3000 rpm
internal coolant... 20 bar
axis w... 730mm
z axis... 1700mm
magazine places... 20
iso 50
clamping table surface... 1800 x 2200mm
maximum workpiece weight... 15000kg
chip conveyor
universal milling head uhm 30 with 1 â° index
heidenhain ts 640 probe
std:
cnc system: 14739: 31
machine hours: 10172: 53
program: 3669: 59
spindle: 3581: 03
axis: 3627: 18
contain square
 CONTROL HEIDENHAIN... TNC 530 SPINDLE DIAMETER... 130MM X AXIS... 4000MM Y AXIS... 2500MM SPINDLE SPEED... 0-3000 RPM INTERNAL COOLANT... 20 BAR AXIS W... 730MM Z AXIS... 1700MM MAGAZINE PLACES... 20 ISO 50 CLAMPING TABLE SURFACE... 1800 X 2200MM MAXIMUM WORKPIECE WEIGHT... 15000KG CHIP CONVEYOR UNIVERSAL MILLING HEAD UHM 30 WITH 1 &ACIRC;&DEG; INDEX HEIDENHAIN TS 640 PROBE STD: CNC SYSTEM: 14739: 31 MACHINE HOURS: 10172: 53 PROGRAM: 3669: 59 SPINDLE: 3581: 03 AXIS: 3627: 18 CONTAIN SQUARE
Vendedor: Herr Radek Procházka
Año de construcción: usado
Ubicación: Land-new semi automatic contour edge bander\r\nbrand: vitap\r\ntype: eclipse pro\r\n\r\n- for shaped concave, convex  and straight panels 10-60 mm thickness, 1-3 mm band thickness\r\n\r\ngluing station\r\n- glue and tape application on big and small shaped panels\r\n- equipped with glue pot with 1 kg capacity\r\n- quick assembly system\r\n- 2 rollers to copy the shape of the piece\r\n-1 tilting support roller to enable the exit of the panel after banding\r\n- glue application amount is adjusted via a knob\r\n- set up of the glue temperature\r\n- automatic guillotine for coiled material up to 3 mm x 45 mm\r\n\r\nthree kind of works:\r\n-encoder\r\n-encoder + laser\r\n-encoder to overtake the board to cut it and to heat it\r\n- new laser system for precision cutting to band closed peaces\r\n- plc to set the lenght and the cut of the tape (by means of an encoder) for open and closed pieces;\r\n- high definition laser to make an easy programmation of the cut for closed pieces with no need of measuring the piece;\r\n- slowing-down feeding speed by foot pedal and laser with external potentiometer and 0,37 motor\r\n- color touch screen 7\r\n- on/off automatic feeder of the panel\r\n- raisable working table for small panels\r\n- utilizes 3 x 500 w heating elements with electronic temperature control via thermoregulator\r\ntrimming station with pneumatic tilting, to allow edgebanding of big pieces;\r\n\r\n- trimming unit with:\r\n- 2 motors 0,5 kw high frequency 15.000 rpm with up/down and front copiers and pneumatic cylinder to lift the motors approaching the pieces to be trimmed\r\n- front copier external adjustment of the trimming unit\r\n- on/off trimming unit\r\n- 2 brazed cutters r=3, z=6\r\n- raisable working table for small panels\r\n- reinforced arm\r\n- end trimming\r\n- ce standards\r\n\r\n\r\noptions:\r\n- enlarged feeding roller for very sharp corners\r\n- additional bottom wheel with support for very sharp corners\r\n\r\n NEW SEMI AUTOMATIC CONTOUR EDGE BANDER\R\NBRAND: VITAP\R\NTYPE: ECLIPSE PRO\R\N\R\N- FOR SHAPED CONCAVE, CONVEX AND STRAIGHT PANELS 10-60 MM THICKNESS, 1-3 MM BAND THICKNESS\R\N\R\NGLUING STATION\R\N- GLUE AND TAPE APPLICATION ON BIG AND SMALL SHAPED PANELS\R\N- EQUIPPED WITH GLUE POT WITH 1 KG CAPACITY\R\N- QUICK ASSEMBLY SYSTEM\R\N- 2 ROLLERS TO COPY THE SHAPE OF THE PIECE\R\N-1 TILTING SUPPORT ROLLER TO ENABLE THE EXIT OF THE PANEL AFTER BANDING\R\N- GLUE APPLICATION AMOUNT IS ADJUSTED VIA A KNOB\R\N- SET UP OF THE GLUE TEMPERATURE\R\N- AUTOMATIC GUILLOTINE FOR COILED MATERIAL UP TO 3 MM X 45 MM\R\N\R\NTHREE KIND OF WORKS:\R\N-ENCODER\R\N-ENCODER + LASER\R\N-ENCODER TO OVERTAKE THE BOARD TO CUT IT AND TO HEAT IT\R\N- NEW LASER SYSTEM FOR PRECISION CUTTING TO BAND CLOSED PEACES\R\N- PLC TO SET THE LENGHT AND THE CUT OF THE TAPE (BY MEANS OF AN ENCODER) FOR OPEN AND CLOSED PIECES;\R\N- HIGH DEFINITION LASER TO MAKE AN EASY PROGRAMMATION OF THE CUT FOR CLOSED PIECES WITH NO NEED OF MEASURING THE PIECE;\R\N- SLOWING-DOWN FEEDING SPEED BY FOOT PEDAL AND LASER WITH EXTERNAL POTENTIOMETER AND 0,37 MOTOR\R\N- COLOR TOUCH SCREEN 7\R\N- ON/OFF AUTOMATIC FEEDER OF THE PANEL\R\N- RAISABLE WORKING TABLE FOR SMALL PANELS\R\N- UTILIZES 3 X 500 W HEATING ELEMENTS WITH ELECTRONIC TEMPERATURE CONTROL VIA THERMOREGULATOR\R\NTRIMMING STATION WITH PNEUMATIC TILTING, TO ALLOW EDGEBANDING OF BIG PIECES;\R\N\R\N- TRIMMING UNIT WITH:\R\N- 2 MOTORS 0,5 KW HIGH FREQUENCY 15.000 RPM WITH UP/DOWN AND FRONT COPIERS AND PNEUMATIC CYLINDER TO LIFT THE MOTORS APPROACHING THE PIECES TO BE TRIMMED\R\N- FRONT COPIER EXTERNAL ADJUSTMENT OF THE TRIMMING UNIT\R\N- ON/OFF TRIMMING UNIT\R\N- 2 BRAZED CUTTERS R=3, Z=6\R\N- RAISABLE WORKING TABLE FOR SMALL PANELS\R\N- REINFORCED ARM\R\N- END TRIMMING\R\N- CE STANDARDS\R\N\R\N\R\NOPTIONS:\R\N- ENLARGED FEEDING ROLLER FOR VERY SHARP CORNERS\R\N- ADDITIONAL BOTTOM WHEEL WITH SUPPORT FOR VERY SHARP CORNERS\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-no. 04045

sale in the sales order from site cnc machining centre for door production reichenbacher iii vision t fischertech

used, year 2011
available from april 2018

the vision is a numerically controlled machining centre for machining wood and plastic parts, as well as parts from composite materials processing. it is designed as routers in a bridges portal design and allows the fully automatic milling, to milling and profile milling.

drilling and insertion station for door hinges
vibration conveyors with supply unit for door hinges
combination sword brush on the outlet side
cnc control siemens sinumerik 840 d solution line, with ncu 720.2
fischertech facilities
kuka robots with linear axis
ausrichte - and turning station for workpieces numerically controlled linear motion in the nc axes:
 
x 1 / x 2-axle movement of the bridge portal on the bed 7,880 mm (longitudinal movement *)

y1 axis movement of the transversal carriage on the portal (working stroke) 2,200 mm (cross movement) * working unit 1

y2-axis movement of the transversal carriage on the portal (working stroke) 2,200 mm (cross movement) * working unit 2

z1 axis movement of the vertical slide in the portal 380 mm vertical movement.
 work unit 1

z2 axis movement of the vertical slide in the portal 380 mm vertical movement.
working unit 2

v1 axis movement of the table bar (machine table, left) 1,150 mm.
(cross movement) *.

v12 axis movement of the table bar (machine table right) 1,150 mm (cross movement) *.

x 3-axis movement of the carriage of the tape cartridge drive 7,880 mm longitudinal movement * l

wwy1-achse movement of the carriage of the double hook (submit) transverse movement *)
wwy2-achse movement of the carriage of the double hook (submit) transverse movement) *.

*) reference: perpendicular to the direction of operating table longitudinal

numerically controlled rotary movements:

b11 - axis 45 â° to the x-y plane +/-180 degrees rotation of the cutting unit 1
b12-axis 45 â° to the x-y plane + /.180 degrees rotation of the milling unit 2
b-axis 00 insertion movement of the band union station
c11-axis in the x-y plane + / _ 360-degree rotation around the axis 21
c12-axis in the x-y plane + / _ 360 degrees rotation to the 22 axis
wwc1 in x-y plane rotation of the double hook 1 (left)
wwc2 in x-y plane rotation of the double gripper 2 (right)
ww-axis in the x-y plane 00 motion of the tool magazine

work units 1 and 2:
rated power: 15,0 kw at 1 24,000 min â·
power s1 constant in the speed range approx. 12,000 min-1... 24,000 min-1
performance under about 9.800 min-1 - proportional to the speed
speed 500... 24,000 min â· of 1, about program preselected
right / left rotation program preselected
the spindle is automatically braked when turned off

drive: rf spindle powered by frequency converter
water cooling with cooling unit, hybrid bearings
air barrier on the work side of the spindle prevents the ingress of dirt particles in the spindle
	
spindle lubrication: grease lubrication, no further lubrication during the lifetime required

clamping system: automatic tensioning system with mechanical tool clamping toughened plate spring package
tool changing due to spring relaxation by means of a pneumatic cylinder
automatic taper cleaning with compressed air

spindle taper: taper hollow hsk 63 according to din 69893 form f, with circumferential groove

tool length: 240 mm, from plan flat tool holder
tool diameter: max 0 200 mm (additional units and saw blades 300 mm)
set tool dimensions: max 6 kg

optional vibration monitoring system (ifm fa.)

tool magazine for 40 seats
tool holder identical on the milling spindle
tool gripper: spring tension clamp gripper
centre distance of tools: 80 mm
flying circle at additional heads of max 250 mm, possibly can be not occupied neighbouring seats
werkzeuglange: max 240 mm, from plan flat tool holder
tool diameter: according to the available space of to 0200 mm
set tool dimensions: max 6 kg for a single tool place, 160 kg for the entire tool magazine

feed drives:
feed speed continuously programmable
v-axis ball screw
with upstream toothed belt drive up to 20 m / min
x 1 / x 2-axle and pinion drive up to 60 m / min
x 3-axis pinion drive-
y-axis rack and pinion drive up to 90 m / min
z axes ball screw drive with upstream toothed belt drive up to 20 m / min
8-axis helical gear units up to 90 â° / sec
811/812-axis helical gear units up to 90 â° / sec
c-axis helical gear units up to 90 â° / sec
ww-axis helical gears-
wwc-axis helical gears-
vvwy-axis helical -.
roller conveyor (outlet side) chain - drive
conveyor belts spur gears-

compressed air central lubrication system

machine table
construction: pin table with adjustable cross back
table layout: 2 clamping stations, for reciprocal loading,.
geometry: free height between grid table and the bottom of the portal about 220 mm when extended vacuum cleaners
workspace: when editing with two aggregates and quick change maximum 2,200 mm x 1 500 mm â· * l
when editing with an aggregate approximately 3,000 mm x 1.500mm * l
for manual loading and editing with an aggregate 4.000 mm x 1 600mm â· i

pneumatically retractable stops in all directions, with sensors
workpiece clamping via 4 x 36 = 144 piece vacuum cleaners
lift of the vacuum cleaner suction diameter of 150 mm, 500 mm

dimensions of the system: 11,00 m length + drilling station (5 m length) depth 12,00 m heavy equipment machinery and equipment without further warranty.
technical data according to the manufacturer, no guarantee!

subject to prior sale, on behalf of the customer

terms of delivery: from location close to 73433 aalen

our general terms and conditions apply, see in the  
 NO. 04045 SALE IN THE SALES ORDER FROM SITE CNC MACHINING CENTRE FOR DOOR PRODUCTION REICHENBACHER III VISION T FISCHERTECH USED, YEAR 2011 AVAILABLE FROM APRIL 2018 THE VISION IS A NUMERICALLY CONTROLLED MACHINING CENTRE FOR MACHINING WOOD AND PLASTIC PARTS, AS WELL AS PARTS FROM COMPOSITE MATERIALS PROCESSING. IT IS DESIGNED AS ROUTERS IN A BRIDGES PORTAL DESIGN AND ALLOWS THE FULLY AUTOMATIC MILLING, TO MILLING AND PROFILE MILLING. DRILLING AND INSERTION STATION FOR DOOR HINGES VIBRATION CONVEYORS WITH SUPPLY UNIT FOR DOOR HINGES COMBINATION SWORD BRUSH ON THE OUTLET SIDE CNC CONTROL SIEMENS SINUMERIK 840 D SOLUTION LINE, WITH NCU 720.2 FISCHERTECH FACILITIES KUKA ROBOTS WITH LINEAR AXIS AUSRICHTE - AND TURNING STATION FOR WORKPIECES NUMERICALLY CONTROLLED LINEAR MOTION IN THE NC AXES: X 1 / X 2-AXLE MOVEMENT OF THE BRIDGE PORTAL ON THE BED 7,880 MM (LONGITUDINAL MOVEMENT *) Y1 AXIS MOVEMENT OF THE TRANSVERSAL CARRIAGE ON THE PORTAL (WORKING STROKE) 2,200 MM (CROSS MOVEMENT) * WORKING UNIT 1 Y2-AXIS MOVEMENT OF THE TRANSVERSAL CARRIAGE ON THE PORTAL (WORKING STROKE) 2,200 MM (CROSS MOVEMENT) * WORKING UNIT 2 Z1 AXIS MOVEMENT OF THE VERTICAL SLIDE IN THE PORTAL 380 MM VERTICAL MOVEMENT. WORK UNIT 1 Z2 AXIS MOVEMENT OF THE VERTICAL SLIDE IN THE PORTAL 380 MM VERTICAL MOVEMENT. WORKING UNIT 2 V1 AXIS MOVEMENT OF THE TABLE BAR (MACHINE TABLE, LEFT) 1,150 MM. (CROSS MOVEMENT) *. V12 AXIS MOVEMENT OF THE TABLE BAR (MACHINE TABLE RIGHT) 1,150 MM (CROSS MOVEMENT) *. X 3-AXIS MOVEMENT OF THE CARRIAGE OF THE TAPE CARTRIDGE DRIVE 7,880 MM LONGITUDINAL MOVEMENT * L WWY1-ACHSE MOVEMENT OF THE CARRIAGE OF THE DOUBLE HOOK (SUBMIT) TRANSVERSE MOVEMENT *) WWY2-ACHSE MOVEMENT OF THE CARRIAGE OF THE DOUBLE HOOK (SUBMIT) TRANSVERSE MOVEMENT) *. *) REFERENCE: PERPENDICULAR TO THE DIRECTION OF OPERATING TABLE LONGITUDINAL NUMERICALLY CONTROLLED ROTARY MOVEMENTS: B11 - AXIS 45 &ACIRC;&DEG; TO THE X-Y PLANE +/-180 DEGREES ROTATION OF THE CUTTING UNIT 1 B12-AXIS 45 &ACIRC;&DEG; TO THE X-Y PLANE + /.180 DEGREES ROTATION OF THE MILLING UNIT 2 B-AXIS 00 INSERTION MOVEMENT OF THE BAND UNION STATION C11-AXIS IN THE X-Y PLANE + / _ 360-DEGREE ROTATION AROUND THE AXIS 21 C12-AXIS IN THE X-Y PLANE + / _ 360 DEGREES ROTATION TO THE 22 AXIS WWC1 IN X-Y PLANE ROTATION OF THE DOUBLE HOOK 1 (LEFT) WWC2 IN X-Y PLANE ROTATION OF THE DOUBLE GRIPPER 2 (RIGHT) WW-AXIS IN THE X-Y PLANE 00 MOTION OF THE TOOL MAGAZINE WORK UNITS 1 AND 2: RATED POWER: 15,0 KW AT 1 24,000 MIN &ACIRC;&MIDDOT; POWER S1 CONSTANT IN THE SPEED RANGE APPROX. 12,000 MIN-1... 24,000 MIN-1 PERFORMANCE UNDER ABOUT 9.800 MIN-1 - PROPORTIONAL TO THE SPEED SPEED 500... 24,000 MIN &ACIRC;&MIDDOT; OF 1, ABOUT PROGRAM PRESELECTED RIGHT / LEFT ROTATION PROGRAM PRESELECTED THE SPINDLE IS AUTOMATICALLY BRAKED WHEN TURNED OFF DRIVE: RF SPINDLE POWERED BY FREQUENCY CONVERTER WATER COOLING WITH COOLING UNIT, HYBRID BEARINGS AIR BARRIER ON THE WORK SIDE OF THE SPINDLE PREVENTS THE INGRESS OF DIRT PARTICLES IN THE SPINDLE SPINDLE LUBRICATION: GREASE LUBRICATION, NO FURTHER LUBRICATION DURING THE LIFETIME REQUIRED CLAMPING SYSTEM: AUTOMATIC TENSIONING SYSTEM WITH MECHANICAL TOOL CLAMPING TOUGHENED PLATE SPRING PACKAGE TOOL CHANGING DUE TO SPRING RELAXATION BY MEANS OF A PNEUMATIC CYLINDER AUTOMATIC TAPER CLEANING WITH COMPRESSED AIR SPINDLE TAPER: TAPER HOLLOW HSK 63 ACCORDING TO DIN 69893 FORM F, WITH CIRCUMFERENTIAL GROOVE TOOL LENGTH: 240 MM, FROM PLAN FLAT TOOL HOLDER TOOL DIAMETER: MAX 0 200 MM (ADDITIONAL UNITS AND SAW BLADES 300 MM) SET TOOL DIMENSIONS: MAX 6 KG OPTIONAL VIBRATION MONITORING SYSTEM (IFM FA.) TOOL MAGAZINE FOR 40 SEATS TOOL HOLDER IDENTICAL ON THE MILLING SPINDLE TOOL GRIPPER: SPRING TENSION CLAMP GRIPPER CENTRE DISTANCE OF TOOLS: 80 MM FLYING CIRCLE AT ADDITIONAL HEADS OF MAX 250 MM, POSSIBLY CAN BE NOT OCCUPIED NEIGHBOURING SEATS WERKZEUGLANGE: MAX 240 MM, FROM PLAN FLAT TOOL HOLDER TOOL DIAMETER: ACCORDING TO THE AVAILABLE SPACE OF TO 0200 MM SET TOOL DIMENSIONS: MAX 6 KG FOR A SINGLE TOOL PLACE, 160 KG FOR THE ENTIRE TOOL MAGAZINE FEED DRIVES: FEED SPEED CONTINUOUSLY PROGRAMMABLE V-AXIS BALL SCREW WITH UPSTREAM TOOTHED BELT DRIVE UP TO 20 M / MIN X 1 / X 2-AXLE AND PINION DRIVE UP TO 60 M / MIN X 3-AXIS PINION DRIVE- Y-AXIS RACK AND PINION DRIVE UP TO 90 M / MIN Z AXES BALL SCREW DRIVE WITH UPSTREAM TOOTHED BELT DRIVE UP TO 20 M / MIN 8-AXIS HELICAL GEAR UNITS UP TO 90 &ACIRC;&DEG; / SEC 811/812-AXIS HELICAL GEAR UNITS UP TO 90 &ACIRC;&DEG; / SEC C-AXIS HELICAL GEAR UNITS UP TO 90 &ACIRC;&DEG; / SEC WW-AXIS HELICAL GEARS- WWC-AXIS HELICAL GEARS- VVWY-AXIS HELICAL -. ROLLER CONVEYOR (OUTLET SIDE) CHAIN - DRIVE CONVEYOR BELTS SPUR GEARS- COMPRESSED AIR CENTRAL LUBRICATION SYSTEM MACHINE TABLE CONSTRUCTION: PIN TABLE WITH ADJUSTABLE CROSS BACK TABLE LAYOUT: 2 CLAMPING STATIONS, FOR RECIPROCAL LOADING,. GEOMETRY: FREE HEIGHT BETWEEN GRID TABLE AND THE BOTTOM OF THE PORTAL ABOUT 220 MM WHEN EXTENDED VACUUM CLEANERS WORKSPACE: WHEN EDITING WITH TWO AGGREGATES AND QUICK CHANGE MAXIMUM 2,200 MM X 1 500 MM &ACIRC;&MIDDOT; * L WHEN EDITING WITH AN AGGREGATE APPROXIMATELY 3,000 MM X 1.500MM * L FOR MANUAL LOADING AND EDITING WITH AN AGGREGATE 4.000 MM X 1 600MM &ACIRC;&MIDDOT; I PNEUMATICALLY RETRACTABLE STOPS IN ALL DIRECTIONS, WITH SENSORS WORKPIECE CLAMPING VIA 4 X 36 = 144 PIECE VACUUM CLEANERS LIFT OF THE VACUUM CLEANER SUCTION DIAMETER OF 150 MM, 500 MM DIMENSIONS OF THE SYSTEM: 11,00 M LENGTH + DRILLING STATION (5 M LENGTH) DEPTH 12,00 M HEAVY EQUIPMENT MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. TECHNICAL DATA ACCORDING TO THE MANUFACTURER, NO GUARANTEE! SUBJECT TO PRIOR SALE, ON BEHALF OF THE CUSTOMER TERMS OF DELIVERY: FROM LOCATION CLOSE TO 73433 AALEN OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 1 kg<br/>dimensions (l x w x h) approx.: 1 x 1 x 1 mm<br/>description: <b>well-kept and professional flex-line bargstedt tfl 420 - holzma hkl 380 - homag kfl 610 flex production cell lot size 1 with laser edging, power controll pc22 control, flexible edge sequence control and equipping in the gap for significant increase of the production time! there are 2 homag kfl 610 edge banding machines located opposite each other in the production cell. the plant has an original list price of approx. 3.3 million eur and will be available in july 2019!</b><br> <br> <b>bargstedt tfl 420/40/16 storage system</b><br> for continuous handling of plates.<br> <br> technical data:<br> - workpiece lengths 2,000 - 4,300 mm<br> - workpiece widths 800 - 2,200 mm<br> - workpiece weight max. 250 kg<br> - drive trolley v = approx. 8 - 90 m/min.<br> - lift drive v = approx. 8 - 60 m/min.<br> - drive bridge v = ca. 8 - 70 m/min.<br> - rotary drive 90°<br> <br> <b>holzma profi hkl 380/38/22/l/x angular plate dividing saw with speed concept</b><br> + significantly higher speed and dynamic accelleration of the saw carriage<br> + enormous acceleration of the program fence<br> + liftable collets (crosscut saw)<br> + central angle pressure device<br> + electronic height control of the pressure beam<br> + power control cadmatic 4<br> <br> technical data:<br> - cutting length longitudinal saw 3,800 mm<br> - cutting length crosscut saw 2,200 mm<br> - saw blade projection 95 mm<br> - main saw motor 2 pcs. each 18.0 kw<br> - scoring saw motor 2 pcs. each 2.2 kw<br> - 1 pc. collet power-concept (3-finger) pos. 100 mm<br> - saw carriage feed forward 1 - 150 m/min<br> - saw carriage feed backward constant 150 m/min<br> - program fence speed forward eu countries 25 m/min<br> - program fence speed backward longitudinal saw 90 m/min<br> - program fence speed backward crosscut saw 140 m/min<br> - automatic pressure beam height control<br> - automatic cutting height adjustment<br> - adjustabl WEIGHT APPROX.: 1 KG
DIMENSIONS (L X W X H) APPROX.: 1 X 1 X 1 MM
DESCRIPTION: WELL-KEPT AND PROFESSIONAL FLEX-LINE BARGSTEDT TFL 420 - HOLZMA HKL 380 - HOMAG KFL 610 FLEX PRODUCTION CELL LOT SIZE 1 WITH LASER EDGING, POWER CONTROLL PC22 CONTROL, FLEXIBLE EDGE SEQUENCE CONTROL AND EQUIPPING IN THE GAP FOR SIGNIFICANT INCREASE OF THE PRODUCTION TIME! THERE ARE 2 HOMAG KFL 610 EDGE BANDING MACHINES LOCATED OPPOSITE EACH OTHER IN THE PRODUCTION CELL. THE PLANT HAS AN ORIGINAL LIST PRICE OF APPROX. 3.3 MILLION EUR AND WILL BE AVAILABLE IN JULY 2019!

BARGSTEDT TFL 420/40/16 STORAGE SYSTEM
FOR CONTINUOUS HANDLING OF PLATES.

TECHNICAL DATA:
- WORKPIECE LENGTHS 2,000 - 4,300 MM
- WORKPIECE WIDTHS 800 - 2,200 MM
- WORKPIECE WEIGHT MAX. 250 KG
- DRIVE TROLLEY V = APPROX. 8 - 90 M/MIN.
- LIFT DRIVE V = APPROX. 8 - 60 M/MIN.
- DRIVE BRIDGE V = CA. 8 - 70 M/MIN.
- ROTARY DRIVE 90°

HOLZMA PROFI HKL 380/38/22/L/X ANGULAR PLATE DIVIDING SAW WITH SPEED CONCEPT
+ SIGNIFICANTLY HIGHER SPEED AND DYNAMIC ACCELLERATION OF THE SAW CARRIAGE
+ ENORMOUS ACCELERATION OF THE PROGRAM FENCE
+ LIFTABLE COLLETS (CROSSCUT SAW)
+ CENTRAL ANGLE PRESSURE DEVICE
+ ELECTRONIC HEIGHT CONTROL OF THE PRESSURE BEAM
+ POWER CONTROL CADMATIC 4

TECHNICAL DATA:
- CUTTING LENGTH LONGITUDINAL SAW 3,800 MM
- CUTTING LENGTH CROSSCUT SAW 2,200 MM
- SAW BLADE PROJECTION 95 MM
- MAIN SAW MOTOR 2 PCS. EACH 18.0 KW
- SCORING SAW MOTOR 2 PCS. EACH 2.2 KW
- 1 PC. COLLET POWER-CONCEPT (3-FINGER) POS. 100 MM
- SAW CARRIAGE FEED FORWARD 1 - 150 M/MIN
- SAW CARRIAGE FEED BACKWARD CONSTANT 150 M/MIN
- PROGRAM FENCE SPEED FORWARD EU COUNTRIES 25 M/MIN
- PROGRAM FENCE SPEED BACKWARD LONGITUDINAL SAW 90 M/MIN
- PROGRAM FENCE SPEED BACKWARD CROSSCUT SAW 140 M/MIN
- AUTOMATIC PRESSURE BEAM HEIGHT CONTROL
- AUTOMATIC CUTTING HEIGHT ADJUSTMENT
- ADJUSTABL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-no. 04048

cnc machining center ima bima 810 / d / 2 h for worktops with automatic setup table commissioning 1998 traversal direction from left to right specifications: working height 950 + 50 mm working plate size 4500 mm x 1200 mm x 30 / 40 mm (lwh) heavy green dtrã¤ger trained as a machine bed with cross beams as the base engine.
the lower space is approx. 300 mm, height with a waste conveyor belt over the length of the machine bed provided,

editing table with programmable cleaners also tracked with integrated vacuum clamping device, comprising: 4 continuously about nc axes in x direction adjustable support arms with 2 continuously about nc axes in the y direction positioned vacuum suction plates.

processing support:
the editing support consists of a stable, torsionally rigid welded steel construction.
the management of the processing units is carried out in all axes (x-y-z) into the dust-protected, hardened precision linear motion system. the editing support is a central connection for the extraction.
 
inlet direction van from left to right.	
enema device comprising:
-2 continuously about nc-axes mobile transport tongs, in x-direction up to 2000 mm can be positioned to one another.
-1 straight roller conveyor, driven approx. 1.2 m wide and approx. 5.0 m long roller pitch 125 mm
-integrated breitenmess and alignment station.
measuring range 200-1200 mm
 exit device comprising:
-2 continuously about nc-axes mobile transport tongs, in x-direction up to 2000 mm can be positioned to one another.
-1 powered roller conveyor, just rolling, approx. 1.2 m wide, approx. 5 m long; 
division of roles 125 mm

cnc contouring imatronic 231 cnc contouring control system with position-controlled axes. linear interpolation of simultaneously all axes, circular interpolation of two axes in all three planes (in dpi).
integrated programmable logic controller with status message of a / outputs via led and the screen in the control panel.
integrated pc computers, 486sx, 25 mhz, 8 mb ram, 200 mb hdd, 3 1/2 inch floppy drive, 256 k-byte ram buffered workpiece program memory as memory. this is automatically loaded when editing from the hard disk.

user interface for the creation of cnc machining programs. 
imawop

automatic correction calculation for all editing aggregates tool data management, radius and length value for all tools work list creation graphical simulation of the machining of a workpiece drive system position-controlled axles with optimal acceleration and braking performance and towing punching monitoring processing units: 076547: two main spindles, spindle taper: hsk f63,.
power of 12 kw cone diameter 38 mm 547994: two times 18-faches spare magazine magazine places: 18 designed for the recording of adapter units tool length max 220 mm tool diameter max 105 / 205 mm 534691: four milling chucks hsk f63 compl. with collet 25 mm 600112: two central integrated cnc axes, 360 â° turn, all adapter units with torque reaction arm on the main spindle and pneumatic interface 076896: an adapter unit as momentary horizontal nutsã¤ge to laminate under milling in basin snippets travel 5 mm, diameter 100 mm holes 22 mm 076894: an adapter unit for stationary tool holder with 5 mm of travel, can be used as a horizontal nutsã¤ge 076975: an adapter unit corner cutter speed max 6000 rpm milling recording 10 mm rotation range 360 â° 076967: an adapter unit angle blade mitre saws, manually adjustable saw blade diameter 30 mm 200 mm range of 0-100 â°

778625: a stem adapter to cancel of the machined apr profile piece accessories

742595: a probe for detecting the actual workpiece dimensions in the xy and z direction frequency converters spannungskonstant holder / air conditioners 1717066: spannungskonstant holder for the control voltage fluctuations +/-5% 171065: air conditioning unit for the cabinet at ambient temperature above 35 â° c. 

automatic central lubrication for the entire machine two additional waste conveyor 170964: batch run for countertops - cam files 171082: handelsscanner with integrated decoder 171052: network coupling imatronic 231 on an existing network 

170972: dde terminal automatic machine terminal for data acquisition and evaluation on the production machine 171048: remote diagnostics package for imatronic 231 optional: 1 rwg-aufstapeln portal, 8 course, apl buffer storage control system via ferror control

technical data: lwh in mm: 16.000 x 2,000 x 1,300 stack height 1500 mm (ok floor) performance 4 cycles / min connection voltage 400 v, 50 hz
air connection â½ lw 11 vacuum siemens side channel compressor install. services 5.5 kw hub fu regulated 3.0 kw support longitudinal (fu regulated) 4.0 kw vacuum stable bridge construction with 4 feet of pipe 400 x 400 mm wide base plates for the shipping anchors of the plant to the floor is a 2 top rails for the inclusion of the support, support uf guides stored and running on vulkolanrollen. 
support consists of sturdy welded construction, equipped with a severity for the stroke movement (advantage: low height) suction beam, construction made of aluminium, prepared for the recording of the suction plate assembly enough cleaner 70 mm diameter. 

for sale from customer site.  

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

delivery: in stock

our general terms and conditions apply, see in the  






 NO. 04048 CNC MACHINING CENTER IMA BIMA 810 / D / 2 H FOR WORKTOPS WITH AUTOMATIC SETUP TABLE COMMISSIONING 1998 TRAVERSAL DIRECTION FROM LEFT TO RIGHT SPECIFICATIONS: WORKING HEIGHT 950 + 50 MM WORKING PLATE SIZE 4500 MM X 1200 MM X 30 / 40 MM (LWH) HEAVY GREEN DTR&ATILDE;&CURREN;GER TRAINED AS A MACHINE BED WITH CROSS BEAMS AS THE BASE ENGINE. THE LOWER SPACE IS APPROX. 300 MM, HEIGHT WITH A WASTE CONVEYOR BELT OVER THE LENGTH OF THE MACHINE BED PROVIDED, EDITING TABLE WITH PROGRAMMABLE CLEANERS ALSO TRACKED WITH INTEGRATED VACUUM CLAMPING DEVICE, COMPRISING: 4 CONTINUOUSLY ABOUT NC AXES IN X DIRECTION ADJUSTABLE SUPPORT ARMS WITH 2 CONTINUOUSLY ABOUT NC AXES IN THE Y DIRECTION POSITIONED VACUUM SUCTION PLATES. PROCESSING SUPPORT: THE EDITING SUPPORT CONSISTS OF A STABLE, TORSIONALLY RIGID WELDED STEEL CONSTRUCTION. THE MANAGEMENT OF THE PROCESSING UNITS IS CARRIED OUT IN ALL AXES (X-Y-Z) INTO THE DUST-PROTECTED, HARDENED PRECISION LINEAR MOTION SYSTEM. THE EDITING SUPPORT IS A CENTRAL CONNECTION FOR THE EXTRACTION. INLET DIRECTION VAN FROM LEFT TO RIGHT. ENEMA DEVICE COMPRISING: -2 CONTINUOUSLY ABOUT NC-AXES MOBILE TRANSPORT TONGS, IN X-DIRECTION UP TO 2000 MM CAN BE POSITIONED TO ONE ANOTHER. -1 STRAIGHT ROLLER CONVEYOR, DRIVEN APPROX. 1.2 M WIDE AND APPROX. 5.0 M LONG ROLLER PITCH 125 MM -INTEGRATED BREITENMESS AND ALIGNMENT STATION. MEASURING RANGE 200-1200 MM EXIT DEVICE COMPRISING: -2 CONTINUOUSLY ABOUT NC-AXES MOBILE TRANSPORT TONGS, IN X-DIRECTION UP TO 2000 MM CAN BE POSITIONED TO ONE ANOTHER. -1 POWERED ROLLER CONVEYOR, JUST ROLLING, APPROX. 1.2 M WIDE, APPROX. 5 M LONG; DIVISION OF ROLES 125 MM CNC CONTOURING IMATRONIC 231 CNC CONTOURING CONTROL SYSTEM WITH POSITION-CONTROLLED AXES. LINEAR INTERPOLATION OF SIMULTANEOUSLY ALL AXES, CIRCULAR INTERPOLATION OF TWO AXES IN ALL THREE PLANES (IN DPI). INTEGRATED PROGRAMMABLE LOGIC CONTROLLER WITH STATUS MESSAGE OF A / OUTPUTS VIA LED AND THE SCREEN IN THE CONTROL PANEL. INTEGRATED PC COMPUTERS, 486SX, 25 MHZ, 8 MB RAM, 200 MB HDD, 3 1/2 INCH FLOPPY DRIVE, 256 K-BYTE RAM BUFFERED WORKPIECE PROGRAM MEMORY AS MEMORY. THIS IS AUTOMATICALLY LOADED WHEN EDITING FROM THE HARD DISK. USER INTERFACE FOR THE CREATION OF CNC MACHINING PROGRAMS. IMAWOP AUTOMATIC CORRECTION CALCULATION FOR ALL EDITING AGGREGATES TOOL DATA MANAGEMENT, RADIUS AND LENGTH VALUE FOR ALL TOOLS WORK LIST CREATION GRAPHICAL SIMULATION OF THE MACHINING OF A WORKPIECE DRIVE SYSTEM POSITION-CONTROLLED AXLES WITH OPTIMAL ACCELERATION AND BRAKING PERFORMANCE AND TOWING PUNCHING MONITORING PROCESSING UNITS: 076547: TWO MAIN SPINDLES, SPINDLE TAPER: HSK F63,. POWER OF 12 KW CONE DIAMETER 38 MM 547994: TWO TIMES 18-FACHES SPARE MAGAZINE MAGAZINE PLACES: 18 DESIGNED FOR THE RECORDING OF ADAPTER UNITS TOOL LENGTH MAX 220 MM TOOL DIAMETER MAX 105 / 205 MM 534691: FOUR MILLING CHUCKS HSK F63 COMPL. WITH COLLET 25 MM 600112: TWO CENTRAL INTEGRATED CNC AXES, 360 &ACIRC;&DEG; TURN, ALL ADAPTER UNITS WITH TORQUE REACTION ARM ON THE MAIN SPINDLE AND PNEUMATIC INTERFACE 076896: AN ADAPTER UNIT AS MOMENTARY HORIZONTAL NUTS&ATILDE;&CURREN;GE TO LAMINATE UNDER MILLING IN BASIN SNIPPETS TRAVEL 5 MM, DIAMETER 100 MM HOLES 22 MM 076894: AN ADAPTER UNIT FOR STATIONARY TOOL HOLDER WITH 5 MM OF TRAVEL, CAN BE USED AS A HORIZONTAL NUTS&ATILDE;&CURREN;GE 076975: AN ADAPTER UNIT CORNER CUTTER SPEED MAX 6000 RPM MILLING RECORDING 10 MM ROTATION RANGE 360 &ACIRC;&DEG; 076967: AN ADAPTER UNIT ANGLE BLADE MITRE SAWS, MANUALLY ADJUSTABLE SAW BLADE DIAMETER 30 MM 200 MM RANGE OF 0-100 &ACIRC;&DEG; 778625: A STEM ADAPTER TO CANCEL OF THE MACHINED APR PROFILE PIECE ACCESSORIES 742595: A PROBE FOR DETECTING THE ACTUAL WORKPIECE DIMENSIONS IN THE XY AND Z DIRECTION FREQUENCY CONVERTERS SPANNUNGSKONSTANT HOLDER / AIR CONDITIONERS 1717066: SPANNUNGSKONSTANT HOLDER FOR THE CONTROL VOLTAGE FLUCTUATIONS +/-5% 171065: AIR CONDITIONING UNIT FOR THE CABINET AT AMBIENT TEMPERATURE ABOVE 35 &ACIRC;&DEG; C. AUTOMATIC CENTRAL LUBRICATION FOR THE ENTIRE MACHINE TWO ADDITIONAL WASTE CONVEYOR 170964: BATCH RUN FOR COUNTERTOPS - CAM FILES 171082: HANDELSSCANNER WITH INTEGRATED DECODER 171052: NETWORK COUPLING IMATRONIC 231 ON AN EXISTING NETWORK 170972: DDE TERMINAL AUTOMATIC MACHINE TERMINAL FOR DATA ACQUISITION AND EVALUATION ON THE PRODUCTION MACHINE 171048: REMOTE DIAGNOSTICS PACKAGE FOR IMATRONIC 231 OPTIONAL: 1 RWG-AUFSTAPELN PORTAL, 8 COURSE, APL BUFFER STORAGE CONTROL SYSTEM VIA FERROR CONTROL TECHNICAL DATA: LWH IN MM: 16.000 X 2,000 X 1,300 STACK HEIGHT 1500 MM (OK FLOOR) PERFORMANCE 4 CYCLES / MIN CONNECTION VOLTAGE 400 V, 50 HZ AIR CONNECTION &ACIRC;&FRAC12; LW 11 VACUUM SIEMENS SIDE CHANNEL COMPRESSOR INSTALL. SERVICES 5.5 KW HUB FU REGULATED 3.0 KW SUPPORT LONGITUDINAL (FU REGULATED) 4.0 KW VACUUM STABLE BRIDGE CONSTRUCTION WITH 4 FEET OF PIPE 400 X 400 MM WIDE BASE PLATES FOR THE SHIPPING ANCHORS OF THE PLANT TO THE FLOOR IS A 2 TOP RAILS FOR THE INCLUSION OF THE SUPPORT, SUPPORT UF GUIDES STORED AND RUNNING ON VULKOLANROLLEN. SUPPORT CONSISTS OF STURDY WELDED CONSTRUCTION, EQUIPPED WITH A SEVERITY FOR THE STROKE MOVEMENT (ADVANTAGE: LOW HEIGHT) SUCTION BEAM, CONSTRUCTION MADE OF ALUMINIUM, PREPARED FOR THE RECORDING OF THE SUCTION PLATE ASSEMBLY ENOUGH CLEANER 70 MM DIAMETER. FOR SALE FROM CUSTOMER SITE. USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE DELIVERY: IN STOCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 13.500 €
Ubicación: Land-serial number: 0-261-02-1540 <br/>weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 9000 x2400x 2400 mm<br/>feed: 11-20 m/min<br/>edge thickness: 0,4 - 12 mm<br/>workpiece thickness: 8 - 60  mm<br/>joint trimming unit: ja  <br/>gluing unit: quickmelt <br/>snipping unit: hl 6210  2 x 0,35 kw <br/>rough trimming unit: bf 6230 2 x 0,55kw <br/>fine trimming unit: bf 6335 2x0,55 kw <br/>profile trimming unit: ff 6240 ( 4 motore 0,3 kw) <br/>universal trimming unit: nf3400 nut einheit/grooving unit 1,85kw <br/>flat scraping unit: zf 6600 <br/>profile scraping unit: zk 6510 <br/>total power approx: 18,5 kw<br/>edge magazine with: 1 -fold roller<br/>description: powerful brandt profiline kdn ( kdf) 780 edgebander<br> <br> the machine was later equipped with the joint trimming unit<br> - infeed fence adjustable by programm control<br> - pressure zone adjustable by programm control<br> - quickmelt gluing unit<br> - edge thickness adjustable by programm control<br> - automatic edge-feed<br> - pneumatic adjustment of snipping unit chamfer/straight<br> <br> 1st trimming unit equipped with<br>  , ,pneumatic 2-spot adjustment of vertical sensing rolls<br>  , ,pneumatic axial adjustment<br> <br> 2nd trimming unit equipped with<br>  , ,nc servo motor positioning for different edge<br>  , ,thickness and profiles<br> <br> grooving unit 1,84 kw with:<br>  , ,pneumatic set-in and out ( no intermittent control )<br>  , ,height adjustment by a motor driven axis<br> <br> profile scraper unit with:<br> pneumatic addjustment ( in/out)<br> <br> -interface for return conveying system<br> <br> - ligmatech return conveying system zhr 15.<br> function & specifications:<br> after panels have been edgebanded, they are automatically lifted upwards by a unique scissors action, transferred to a top feeder unit, which feeds the panels onto a gravity roller track for return to operator, crosswise fed panels are automatically rotated for lengthwis SERIAL NUMBER: 0-261-02-1540
WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 9000 X2400X 2400 MM
FEED: 11-20 M/MIN
EDGE THICKNESS: 0,4 - 12 MM
WORKPIECE THICKNESS: 8 - 60 MM
JOINT TRIMMING UNIT: JA
GLUING UNIT: QUICKMELT
SNIPPING UNIT: HL 6210 2 X 0,35 KW
ROUGH TRIMMING UNIT: BF 6230 2 X 0,55KW
FINE TRIMMING UNIT: BF 6335 2X0,55 KW
PROFILE TRIMMING UNIT: FF 6240 ( 4 MOTORE 0,3 KW)
UNIVERSAL TRIMMING UNIT: NF3400 NUT EINHEIT/GROOVING UNIT 1,85KW
FLAT SCRAPING UNIT: ZF 6600
PROFILE SCRAPING UNIT: ZK 6510
TOTAL POWER APPROX: 18,5 KW
EDGE MAGAZINE WITH: 1 -FOLD ROLLER
DESCRIPTION: POWERFUL BRANDT PROFILINE KDN ( KDF) 780 EDGEBANDER

THE MACHINE WAS LATER EQUIPPED WITH THE JOINT TRIMMING UNIT
- INFEED FENCE ADJUSTABLE BY PROGRAMM CONTROL
- PRESSURE ZONE ADJUSTABLE BY PROGRAMM CONTROL
- QUICKMELT GLUING UNIT
- EDGE THICKNESS ADJUSTABLE BY PROGRAMM CONTROL
- AUTOMATIC EDGE-FEED
- PNEUMATIC ADJUSTMENT OF SNIPPING UNIT CHAMFER/STRAIGHT

1ST TRIMMING UNIT EQUIPPED WITH
&NBSP,&NBSP,PNEUMATIC 2-SPOT ADJUSTMENT OF VERTICAL SENSING ROLLS
&NBSP,&NBSP,PNEUMATIC AXIAL ADJUSTMENT

2ND TRIMMING UNIT EQUIPPED WITH
&NBSP,&NBSP,NC SERVO MOTOR POSITIONING FOR DIFFERENT EDGE
&NBSP,&NBSP,THICKNESS AND PROFILES

GROOVING UNIT 1,84 KW WITH:
&NBSP,&NBSP,PNEUMATIC SET-IN AND OUT ( NO INTERMITTENT CONTROL )
&NBSP,&NBSP,HEIGHT ADJUSTMENT BY A MOTOR DRIVEN AXIS

PROFILE SCRAPER UNIT WITH:
PNEUMATIC ADDJUSTMENT ( IN/OUT)

-INTERFACE FOR RETURN CONVEYING SYSTEM

- LIGMATECH RETURN CONVEYING SYSTEM ZHR 15.
FUNCTION & SPECIFICATIONS:
AFTER PANELS HAVE BEEN EDGEBANDED, THEY ARE AUTOMATICALLY LIFTED UPWARDS BY A UNIQUE SCISSORS ACTION, TRANSFERRED TO A TOP FEEDER UNIT, WHICH FEEDS THE PANELS ONTO A GRAVITY ROLLER TRACK FOR RETURN TO OPERATOR, CROSSWISE FED PANELS ARE AUTOMATICALLY ROTATED FOR LENGTHWIS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 18.000 €
Ubicación: Land-
machine type machining center - vertical make mori seiki type cv 500 year 1999 control type cnc storage france country of origin japan delivery immediately
cargo basis exw (incoterms 2010) free t slow technical details

x way 510 mm y route 510 mm z-way 510 mm control msc 803 spindle rotation number 8000 spindle motor 7.5 kw rapid traverse x/y/z 42/32 / min table size 750 x 550 mm tool change time 1.5 sec tool magazine: 25 bt 40 kw total power requirements 51 machine weight approx. 4 t z ubehã¶r program memory 640 m helical interpolation cylindrical interpolation of cnc msg 803
 8000 rpm
 2 fah pallets machine with shuttle table by 180 â° swivel 

 MACHINE TYPE MACHINING CENTER - VERTICAL MAKE MORI SEIKI TYPE CV 500 YEAR 1999 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY IMMEDIATELY CARGO BASIS EXW (INCOTERMS 2010) FREE T SLOW TECHNICAL DETAILS X WAY 510 MM Y ROUTE 510 MM Z-WAY 510 MM CONTROL MSC 803 SPINDLE ROTATION NUMBER 8000 SPINDLE MOTOR 7.5 KW RAPID TRAVERSE X/Y/Z 42/32 / MIN TABLE SIZE 750 X 550 MM TOOL CHANGE TIME 1.5 SEC TOOL MAGAZINE: 25 BT 40 KW TOTAL POWER REQUIREMENTS 51 MACHINE WEIGHT APPROX. 4 T Z UBEH&ATILDE;&PARA;R PROGRAM MEMORY 640 M HELICAL INTERPOLATION CYLINDRICAL INTERPOLATION OF CNC MSG 803 8000 RPM 2 FAH PALLETS MACHINE WITH SHUTTLE TABLE BY 180 &ACIRC;&DEG; SWIVEL
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-cnc boring- routering machine\r\nbrand: vitap\r\ntype: k2 2.0\r\nnew machine\r\n\r\nwith throughfeed panel boring from the bottom and automatic panel return to the operator.\r\n\r\nnumber of vertical independent spindles : n° 12 \r\nnumber of horizontal spindles on x axis : n° (2+2) \r\nnumber of horizontal spindles for drilling on y axis: n° (2 + 2) (on both long sides of the panel) \r\nn° 1 saw blade unit (diameter 100mm) \r\nn° 1 electrospindle 5 kw with iso30 cone (rpm12000- 24000) \r\n\r\nmax panel size: x no limit, y 1250 mm, z 50mm \r\nmin. panel size: \r\nx 270/400 *, y 185 (70 op), z 4 mm (* 270mm with limitations) \r\nmax panel weight: 80 kg - spindles speed rotation : 3500 rpm \r\npanel feeding speed : 25m/min \r\n\r\nair pressure : 7 bar \r\nmaximum air consumption: 700 nlt/min \r\ndiameter of the dust extraction 2xdiam.100mm + 1xdiam.50 mm \r\nmax drilling depth in vertical : 45 mm\r\nmax vertical diameter of the tools 35mm \r\nmax horizontal diameter of the tools 12mm \r\nmotor power : 1,7 kw - exhaust air speed 30 mt/sec \r\n\r\nall types of operations: \r\n- vertical holes (from bottom) \r\n- horizontal holes on the front \r\n- horizontal holes from behind \r\n- horizontal side holes \r\n- holes for hinges (from bottom) \r\n- multiple drilling for shelves (from bottom) \r\n\r\n- blade unit for grooving (from bottom) \r\n- router group electro-spindle with iso 30 quick tool changer (from bottom \r\n\r\nstandard specifications: \r\n- no limit in panel length \r\n- milling from the bottom and automatic return of the piece to the operator + automatic selector for the output of the panel on the back of the machine. high productivity and flexibility \r\n- 4 controlled axes + one for the tool change \r\n- x-axis latest-generation brushless motor with epicyclic reduction gear, pinion and rack with high precision \r\n- y-axis latest-generation brushless motor with epicyclic reduction gear, pinion and rack with high precision \r\n- z-axis: latest-generation brushless motor \r\n- industrial pc for high programming performance \r\n- simple programming \r\n- lcd tft monitor 19 5/4 \r\n- usb port for loading programs executed on a cad station in the office \r\n- cutting optimization software \r\n- cad for graphic programming tpa cad in the basic version \r\n- storage of all files with all data \r\n- macro programming \r\n- dxf file import \r\n- full digital parametric control \r\n\r\nstandard ddt (double dynamic transport)\r\n\r\nbar nesting system\r\n\r\nstandard double ?0? panel reference:\r\nnew generation laser to detect the beginning and the end of the piece. the program can readjust the drilling at the bottom of the piece to have a perfect flush between the vertical and horizontal pieces. the laser is composed by a transmitter and receiver to avoid any error caused by dark colours of the edge band. \r\n\r\nnew system for calibration: 0-3mm on the 4 sides of the panel by shifting the right reference rule \r\n\r\nnew four (4) position linear magazine with automatic change managed by cn (large y axis = 1250mm). the new magazine can receive special heads for angular transmissions (lamello system - ovvo system) \r\n\r\nce standards \r\n\r\noptional:\r\nsupplementary clamp\r\n\r\nfloating pad \r\nnew free nesting system, for perfect cutting performance on the inside of the panel\r\n\r\n- bar code reader and slot for software\r\n\r\n- frontal and rear rollers for long panels 830x630mm\r\n\r\n- min. width of the panel 70 mm\r\n\r\n- aggregate with 90° angle return for working of horizontal milling\r\n\r\n- aggregate for router without circular blade in vertical position for the execution of seats for the housing of the system lamello mod. clamex p \r\n\r\n- aggregate for router for the execution of the seats for the ovvo mounting system\r\n\r\n- tools kit\r\n CNC BORING- ROUTERING MACHINE\R\NBRAND: VITAP\R\NTYPE: K2 2.0\R\NNEW MACHINE\R\N\R\NWITH THROUGHFEED PANEL BORING FROM THE BOTTOM AND AUTOMATIC PANEL RETURN TO THE OPERATOR.\R\N\R\NNUMBER OF VERTICAL INDEPENDENT SPINDLES : N° 12 \R\NNUMBER OF HORIZONTAL SPINDLES ON X AXIS : N° (2+2) \R\NNUMBER OF HORIZONTAL SPINDLES FOR DRILLING ON Y AXIS: N° (2 + 2) (ON BOTH LONG SIDES OF THE PANEL) \R\NN° 1 SAW BLADE UNIT (DIAMETER 100MM) \R\NN° 1 ELECTROSPINDLE 5 KW WITH ISO30 CONE (RPM12000- 24000) \R\N\R\NMAX PANEL SIZE: X NO LIMIT, Y 1250 MM, Z 50MM \R\NMIN. PANEL SIZE: \R\NX 270/400 *, Y 185 (70 OP), Z 4 MM (* 270MM WITH LIMITATIONS) \R\NMAX PANEL WEIGHT: 80 KG - SPINDLES SPEED ROTATION : 3500 RPM \R\NPANEL FEEDING SPEED : 25M/MIN \R\N\R\NAIR PRESSURE : 7 BAR \R\NMAXIMUM AIR CONSUMPTION: 700 NLT/MIN \R\NDIAMETER OF THE DUST EXTRACTION 2XDIAM.100MM + 1XDIAM.50 MM \R\NMAX DRILLING DEPTH IN VERTICAL : 45 MM\R\NMAX VERTICAL DIAMETER OF THE TOOLS 35MM \R\NMAX HORIZONTAL DIAMETER OF THE TOOLS 12MM \R\NMOTOR POWER : 1,7 KW - EXHAUST AIR SPEED 30 MT/SEC \R\N\R\NALL TYPES OF OPERATIONS: \R\N- VERTICAL HOLES (FROM BOTTOM) \R\N- HORIZONTAL HOLES ON THE FRONT \R\N- HORIZONTAL HOLES FROM BEHIND \R\N- HORIZONTAL SIDE HOLES \R\N- HOLES FOR HINGES (FROM BOTTOM) \R\N- MULTIPLE DRILLING FOR SHELVES (FROM BOTTOM) \R\N\R\N- BLADE UNIT FOR GROOVING (FROM BOTTOM) \R\N- ROUTER GROUP ELECTRO-SPINDLE WITH ISO 30 QUICK TOOL CHANGER (FROM BOTTOM \R\N\R\NSTANDARD SPECIFICATIONS: \R\N- NO LIMIT IN PANEL LENGTH \R\N- MILLING FROM THE BOTTOM AND AUTOMATIC RETURN OF THE PIECE TO THE OPERATOR + AUTOMATIC SELECTOR FOR THE OUTPUT OF THE PANEL ON THE BACK OF THE MACHINE. HIGH PRODUCTIVITY AND FLEXIBILITY \R\N- 4 CONTROLLED AXES + ONE FOR THE TOOL CHANGE \R\N- X-AXIS LATEST-GENERATION BRUSHLESS MOTOR WITH EPICYCLIC REDUCTION GEAR, PINION AND RACK WITH HIGH PRECISION \R\N- Y-AXIS LATEST-GENERATION BRUSHLESS MOTOR WITH EPICYCLIC REDUCTION GEAR, PINION AND RACK WITH HIGH PRECISION \R\N- Z-AXIS: LATEST-GENERATION BRUSHLESS MOTOR \R\N- INDUSTRIAL PC FOR HIGH PROGRAMMING PERFORMANCE \R\N- SIMPLE PROGRAMMING \R\N- LCD TFT MONITOR 19 5/4 \R\N- USB PORT FOR LOADING PROGRAMS EXECUTED ON A CAD STATION IN THE OFFICE \R\N- CUTTING OPTIMIZATION SOFTWARE \R\N- CAD FOR GRAPHIC PROGRAMMING TPA CAD IN THE BASIC VERSION \R\N- STORAGE OF ALL FILES WITH ALL DATA \R\N- MACRO PROGRAMMING \R\N- DXF FILE IMPORT \R\N- FULL DIGITAL PARAMETRIC CONTROL \R\N\R\NSTANDARD DDT (DOUBLE DYNAMIC TRANSPORT)\R\N\R\NBAR NESTING SYSTEM\R\N\R\NSTANDARD DOUBLE ?0? PANEL REFERENCE:\R\NNEW GENERATION LASER TO DETECT THE BEGINNING AND THE END OF THE PIECE. THE PROGRAM CAN READJUST THE DRILLING AT THE BOTTOM OF THE PIECE TO HAVE A PERFECT FLUSH BETWEEN THE VERTICAL AND HORIZONTAL PIECES. THE LASER IS COMPOSED BY A TRANSMITTER AND RECEIVER TO AVOID ANY ERROR CAUSED BY DARK COLOURS OF THE EDGE BAND. \R\N\R\NNEW SYSTEM FOR CALIBRATION: 0-3MM ON THE 4 SIDES OF THE PANEL BY SHIFTING THE RIGHT REFERENCE RULE \R\N\R\NNEW FOUR (4) POSITION LINEAR MAGAZINE WITH AUTOMATIC CHANGE MANAGED BY CN (LARGE Y AXIS = 1250MM). THE NEW MAGAZINE CAN RECEIVE SPECIAL HEADS FOR ANGULAR TRANSMISSIONS (LAMELLO SYSTEM - OVVO SYSTEM) \R\N\R\NCE STANDARDS \R\N\R\NOPTIONAL:\R\NSUPPLEMENTARY CLAMP\R\N\R\NFLOATING PAD \R\NNEW FREE NESTING SYSTEM, FOR PERFECT CUTTING PERFORMANCE ON THE INSIDE OF THE PANEL\R\N\R\N- BAR CODE READER AND SLOT FOR SOFTWARE\R\N\R\N- FRONTAL AND REAR ROLLERS FOR LONG PANELS 830X630MM\R\N\R\N- MIN. WIDTH OF THE PANEL 70 MM\R\N\R\N- AGGREGATE WITH 90° ANGLE RETURN FOR WORKING OF HORIZONTAL MILLING\R\N\R\N- AGGREGATE FOR ROUTER WITHOUT CIRCULAR BLADE IN VERTICAL POSITION FOR THE EXECUTION OF SEATS FOR THE HOUSING OF THE SYSTEM LAMELLO MOD. CLAMEX P \R\N\R\N- AGGREGATE FOR ROUTER FOR THE EXECUTION OF THE SEATS FOR THE OVVO MOUNTING SYSTEM\R\N\R\N- TOOLS KIT\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 22.000 €
Ubicación: Land- 
machine type machining center - vertical make mori seiki type sv 500 / 40 year 1999 control type cnc storage france country of origin japan free t slow delivery time upon request freight basis exw (incoterms 2010) technical details

x trail 800 mm y way 510 mm z-way 510 mm control msg 516 spindle rotation number 10000 spindle motor 22/18.5 kw rapid traverse x/y/z 32 mm/min table size 1320 x 600 mm time for tool change 0.9 sec tool magazine: 30 bt 40 stand 200 mm overall power demand 51 kw masch inengewicht approx. 6.9 t eject accessories chip conveyor rear 2 program memory 640 m helical interpolation chip conveyor.
 cnc msg 516
 10000 rpm 
 MACHINE TYPE MACHINING CENTER - VERTICAL MAKE MORI SEIKI TYPE SV 500 / 40 YEAR 1999 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN FREE T SLOW DELIVERY TIME UPON REQUEST FREIGHT BASIS EXW (INCOTERMS 2010) TECHNICAL DETAILS X TRAIL 800 MM Y WAY 510 MM Z-WAY 510 MM CONTROL MSG 516 SPINDLE ROTATION NUMBER 10000 SPINDLE MOTOR 22/18.5 KW RAPID TRAVERSE X/Y/Z 32 MM/MIN TABLE SIZE 1320 X 600 MM TIME FOR TOOL CHANGE 0.9 SEC TOOL MAGAZINE: 30 BT 40 STAND 200 MM OVERALL POWER DEMAND 51 KW MASCH INENGEWICHT APPROX. 6.9 T EJECT ACCESSORIES CHIP CONVEYOR REAR 2 PROGRAM MEMORY 640 M HELICAL INTERPOLATION CHIP CONVEYOR. CNC MSG 516 10000 RPM
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-cnc processing centre\r\nbrand: vitap\r\ntype: k2 920\r\nnew machine\r\n\r\nall type of operations:\r\n- vertical drilling (from bottom)\r\n- frontal horizonthal drilling\r\n- rear horizonthal drilling\r\n- lateral drilling\r\n- drilling for hinges (from bottom)\r\n- multiple drilling for shelves (from bottom)\r\n- blade group for grooving (from bottom)\r\n- routing head group (from bottom)\r\n\r\nstandard\r\nnumber of vertical independent spindles n° 9\r\nnumber of horizontal spindles on x axis n°(2+2)\r\nnumber of horizontal spindles on y axis n°(1+1)\r\nn°1 blade for grooving\r\nn°1 electro spindle 3,3 kw (rpm 24000)\r\n\r\nmax size of the panel \r\nx (no limits), y 920 mm, z 50 mm\r\n\r\nmin. size of the panel \r\nx 270/400*mm, y 185 (70 opt) mm, z 4 mm (* à 270mm)\r\nmax weight of the panel kg 80 \r\n\r\n- panel feeding speed 25m/min\r\n\r\n- spindles speed rotation 3500 rpm \r\n- motor power: 1,7 kw (spindles group and saw)\r\n\r\n- max drilling depth in vertical: 45 mm\r\n- max vertical diameter of the tools 35mm \r\n- max horizontal diameter of the tools 12mm \r\n\r\nair pressure: 7 bar \r\nmaximum air consumption: 60 nlt/min \r\ndiameter of the dust extraction 2x diam.100mm + 1x diam .50 mm\r\n\r\n- exhaust air speed 30 m/sec \r\n- ce standards\r\n\r\nstandard characteristics\r\nno limit in panel length\r\nwith throughfeed panel boring from the bottom and automatic panel return to the operator+ device for front and back exit of the panel\r\nhigh productivity and flexibility\r\n\r\ncontrolled axes\r\naxe x latest generation hepycycloidal motor reducer rack and pinion high precision with helicoidal teeth.\r\naxe y latest generation hepycycloidal motor reducer rack and pinion high precision with helicoidal teeth.\r\naxe z latest generation motor and ball screw.\r\n\r\nindustrial pc for better programming performance \r\n- simple programming \r\n- monitor lcd tft 19 5/4 \r\n- usb port for loading programs run on a station in each office \r\n- cutting optimization software \r\n- graphics programming cad tpa, base version \r\n- saving all files with all data \r\n- macro programming \r\n- import dxf files \r\n- control: full parametric\r\n\r\nddt (double dynamic transport)\r\n- panel movement seamlessly by ddt( double dynamic transport) with boosted brushless motors.\r\ndouble gripper system to move the piece (continuously). it can work also with only one tong for pieces of little size. \r\nit allows the possibility to do channels for the grooving and the milling without interruptions. you can obtain a good stability of the piece during milling.\r\n\r\nbar nesting system: patented vitap software to have all the advantages of nesting and no limit in the execution of horizontal holes (big limit of traditional nesting)\r\n\r\n- double 0 panel reference:\r\nnew generation laser to detect the beginning and the end of the piece. the program can readjust the drilling at the bottom of the piece to have a perfect flush between the vertical and horizontal pieces.\r\nthe laser is composed by a transmitter and receiver to avoid any error caused by dark colors of the edge band.\r\n\r\n\r\noptions:\r\n- supplementary clamp\r\n- barcode reader\r\n- frontal and rear roller track for longer workpieces\r\n- narrow part processing: width min. 70mm\r\n- complete tool set\r\n CNC PROCESSING CENTRE\R\NBRAND: VITAP\R\NTYPE: K2 920\R\NNEW MACHINE\R\N\R\NALL TYPE OF OPERATIONS:\R\N- VERTICAL DRILLING (FROM BOTTOM)\R\N- FRONTAL HORIZONTHAL DRILLING\R\N- REAR HORIZONTHAL DRILLING\R\N- LATERAL DRILLING\R\N- DRILLING FOR HINGES (FROM BOTTOM)\R\N- MULTIPLE DRILLING FOR SHELVES (FROM BOTTOM)\R\N- BLADE GROUP FOR GROOVING (FROM BOTTOM)\R\N- ROUTING HEAD GROUP (FROM BOTTOM)\R\N\R\NSTANDARD\R\NNUMBER OF VERTICAL INDEPENDENT SPINDLES N° 9\R\NNUMBER OF HORIZONTAL SPINDLES ON X AXIS N°(2+2)\R\NNUMBER OF HORIZONTAL SPINDLES ON Y AXIS N°(1+1)\R\NN°1 BLADE FOR GROOVING\R\NN°1 ELECTRO SPINDLE 3,3 KW (RPM 24000)\R\N\R\NMAX SIZE OF THE PANEL \R\NX (NO LIMITS), Y 920 MM, Z 50 MM\R\N\R\NMIN. SIZE OF THE PANEL \R\NX 270/400*MM, Y 185 (70 OPT) MM, Z 4 MM (* à 270MM)\R\NMAX WEIGHT OF THE PANEL KG 80 \R\N\R\N- PANEL FEEDING SPEED 25M/MIN\R\N\R\N- SPINDLES SPEED ROTATION 3500 RPM \R\N- MOTOR POWER: 1,7 KW (SPINDLES GROUP AND SAW)\R\N\R\N- MAX DRILLING DEPTH IN VERTICAL: 45 MM\R\N- MAX VERTICAL DIAMETER OF THE TOOLS 35MM \R\N- MAX HORIZONTAL DIAMETER OF THE TOOLS 12MM \R\N\R\NAIR PRESSURE: 7 BAR \R\NMAXIMUM AIR CONSUMPTION: 60 NLT/MIN \R\NDIAMETER OF THE DUST EXTRACTION 2X DIAM.100MM + 1X DIAM .50 MM\R\N\R\N- EXHAUST AIR SPEED 30 M/SEC \R\N- CE STANDARDS\R\N\R\NSTANDARD CHARACTERISTICS\R\NNO LIMIT IN PANEL LENGTH\R\NWITH THROUGHFEED PANEL BORING FROM THE BOTTOM AND AUTOMATIC PANEL RETURN TO THE OPERATOR+ DEVICE FOR FRONT AND BACK EXIT OF THE PANEL\R\NHIGH PRODUCTIVITY AND FLEXIBILITY\R\N\R\NCONTROLLED AXES\R\NAXE X LATEST GENERATION HEPYCYCLOIDAL MOTOR REDUCER RACK AND PINION HIGH PRECISION WITH HELICOIDAL TEETH.\R\NAXE Y LATEST GENERATION HEPYCYCLOIDAL MOTOR REDUCER RACK AND PINION HIGH PRECISION WITH HELICOIDAL TEETH.\R\NAXE Z LATEST GENERATION MOTOR AND BALL SCREW.\R\N\R\NINDUSTRIAL PC FOR BETTER PROGRAMMING PERFORMANCE \R\N- SIMPLE PROGRAMMING \R\N- MONITOR LCD TFT 19 5/4 \R\N- USB PORT FOR LOADING PROGRAMS RUN ON A STATION IN EACH OFFICE \R\N- CUTTING OPTIMIZATION SOFTWARE \R\N- GRAPHICS PROGRAMMING CAD TPA, BASE VERSION \R\N- SAVING ALL FILES WITH ALL DATA \R\N- MACRO PROGRAMMING \R\N- IMPORT DXF FILES \R\N- CONTROL: FULL PARAMETRIC\R\N\R\NDDT (DOUBLE DYNAMIC TRANSPORT)\R\N- PANEL MOVEMENT SEAMLESSLY BY DDT( DOUBLE DYNAMIC TRANSPORT) WITH BOOSTED BRUSHLESS MOTORS.\R\NDOUBLE GRIPPER SYSTEM TO MOVE THE PIECE (CONTINUOUSLY). IT CAN WORK ALSO WITH ONLY ONE TONG FOR PIECES OF LITTLE SIZE. \R\NIT ALLOWS THE POSSIBILITY TO DO CHANNELS FOR THE GROOVING AND THE MILLING WITHOUT INTERRUPTIONS. YOU CAN OBTAIN A GOOD STABILITY OF THE PIECE DURING MILLING.\R\N\R\NBAR NESTING SYSTEM: PATENTED VITAP SOFTWARE TO HAVE ALL THE ADVANTAGES OF NESTING AND NO LIMIT IN THE EXECUTION OF HORIZONTAL HOLES (BIG LIMIT OF TRADITIONAL NESTING)\R\N\R\N- DOUBLE 0 PANEL REFERENCE:\R\NNEW GENERATION LASER TO DETECT THE BEGINNING AND THE END OF THE PIECE. THE PROGRAM CAN READJUST THE DRILLING AT THE BOTTOM OF THE PIECE TO HAVE A PERFECT FLUSH BETWEEN THE VERTICAL AND HORIZONTAL PIECES.\R\NTHE LASER IS COMPOSED BY A TRANSMITTER AND RECEIVER TO AVOID ANY ERROR CAUSED BY DARK COLORS OF THE EDGE BAND.\R\N\R\N\R\NOPTIONS:\R\N- SUPPLEMENTARY CLAMP\R\N- BARCODE READER\R\N- FRONTAL AND REAR ROLLER TRACK FOR LONGER WORKPIECES\R\N- NARROW PART PROCESSING: WIDTH MIN. 70MM\R\N- COMPLETE TOOL SET\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 1.790 €
Ubicación: Land-solia swa80 salad washing machine used
4 programs:
-wash and just hurl
-wash and long throw
-only wash
-spin duration (lid on = machine, lid to = machine)
good condition, fully functional

â?¢ basic machine made of stainless steel

â?¢ easy loading and unloading

â?¢ fully automatic washing process

â?¢ washing and drying in one operation

â?¢ resources-saving, therefore low maintenance costs

â?¢ electro-mechanical control

â?¢ only 7-8 litres of water per wash

â?¢ water connection: via hose

â?¢ power consumption: 230v, 600w

â?¢ b 800 mm x d 700 mm x h 850 mm
â?¢ washing speed: 50u/min
â?¢ spin speed: 400u/min
â?¢ maximum load capacity: 8kg
â?¢ kinetic energy of the drum: 195nm

â?¢ weight: 120 kg

video test run and more pictures available

SOLIA SWA80 SALAD WASHING MACHINE USED 4 PROGRAMS: -WASH AND JUST HURL -WASH AND LONG THROW -ONLY WASH -SPIN DURATION (LID ON = MACHINE, LID TO = MACHINE) GOOD CONDITION, FULLY FUNCTIONAL &ACIRC;?&CENT; BASIC MACHINE MADE OF STAINLESS STEEL &ACIRC;?&CENT; EASY LOADING AND UNLOADING &ACIRC;?&CENT; FULLY AUTOMATIC WASHING PROCESS &ACIRC;?&CENT; WASHING AND DRYING IN ONE OPERATION &ACIRC;?&CENT; RESOURCES-SAVING, THEREFORE LOW MAINTENANCE COSTS &ACIRC;?&CENT; ELECTRO-MECHANICAL CONTROL &ACIRC;?&CENT; ONLY 7-8 LITRES OF WATER PER WASH &ACIRC;?&CENT; WATER CONNECTION: VIA HOSE &ACIRC;?&CENT; POWER CONSUMPTION: 230V, 600W &ACIRC;?&CENT; B 800 MM X D 700 MM X H 850 MM &ACIRC;?&CENT; WASHING SPEED: 50U/MIN &ACIRC;?&CENT; SPIN SPEED: 400U/MIN &ACIRC;?&CENT; MAXIMUM LOAD CAPACITY: 8KG &ACIRC;?&CENT; KINETIC ENERGY OF THE DRUM: 195NM &ACIRC;?&CENT; WEIGHT: 120 KG VIDEO TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 25.000 €
Ubicación: Land-weight approx.: 15000 kg<br/>dimensions (l x w x h) approx.: 6710 x 7310 x 2438 mm<br/>description: <h3><b>trumpf tc 2020 rfmc sheet metal processing machine</b></h3> <br> - serial number a 16.038<br> - machine number a 0030 a 0165<br> - last service 20.09.2017 at 23,486 operating hours<br> - operating hours read at the end of january 2019 25,236<br> - working range (x x y)<br> - max. sheet format 2500 x 1250 mm (10.5 x 5)<br> - max. sheet thickness 6.4 mm<br> - max. punching force 180 kn<br> - max. workpiece weight 150 kg<br> - max. workpiece weight automation unit 2,720 kg<br> - max. stacking height minus automation unit 130 mm<br> - max. workpiece weight automation unit 2,720 kg<br> - max. stacking height minus automation unit 130 mm<br> - max. throughput height 38 mm<br> - programmable hold-down force 4 to 17 kn<br> - speeds x-axis 90 m/min, y-axis 60 m/min, simultaneous (x + y) 108 m/min<br> - stroke sequence punching: step width 1 mm = 900 rpm<br> - step width 25 mm = 420 rpm<br> - stroke sequence signing 2,200 rpm<br> - c-axis 3 rpm<br> - tools: linear magazine with 19 tools<br> - number of tools with multitool 19 to 190<br> - rotation of all tools 360°<br> - tool change time: single tool approx. 3.5 s<br> - multitool approx. 0.9 s<br> - max. punching diameter single stroke 76 mm<br> - standard multicut 200 mm<br> - programmable parts chute<br> - max. tool change time: single tool approx. 3.5 s, multitool approx. 0.9 s<br> - max. punching diameter single stroke 76 mm<br> - standard multicut 200 mm<br> - programmable parts chute<br> - max. tool change time: single tool approx. 0.5 s<br> - part size 200 x 200 mm<br> - sortable in 2 containers<br> - accuracy position deviation +/- 0.1 mm<br> - average position scatter +/- 0.03 mm<br> - control: trumpf cnc control<br> - basis: bosch 3<br> - colour monitor with a 10.4 screen<br> - hard disk memory with 300 megabyte for nc programs<br> - disk drives<br> - consumption values: electrical connection 18 kva, electr WEIGHT APPROX.: 15000 KG
DIMENSIONS (L X W X H) APPROX.: 6710 X 7310 X 2438 MM
DESCRIPTION:

TRUMPF TC 2020 RFMC SHEET METAL PROCESSING MACHINE


- SERIAL NUMBER A 16.038
- MACHINE NUMBER A 0030 A 0165
- LAST SERVICE 20.09.2017 AT 23,486 OPERATING HOURS
- OPERATING HOURS READ AT THE END OF JANUARY 2019 25,236
- WORKING RANGE (X X Y)
- MAX. SHEET FORMAT 2500 X 1250 MM (10.5 X 5)
- MAX. SHEET THICKNESS 6.4 MM
- MAX. PUNCHING FORCE 180 KN
- MAX. WORKPIECE WEIGHT 150 KG
- MAX. WORKPIECE WEIGHT AUTOMATION UNIT 2,720 KG
- MAX. STACKING HEIGHT MINUS AUTOMATION UNIT 130 MM
- MAX. WORKPIECE WEIGHT AUTOMATION UNIT 2,720 KG
- MAX. STACKING HEIGHT MINUS AUTOMATION UNIT 130 MM
- MAX. THROUGHPUT HEIGHT 38 MM
- PROGRAMMABLE HOLD-DOWN FORCE 4 TO 17 KN
- SPEEDS X-AXIS 90 M/MIN, Y-AXIS 60 M/MIN, SIMULTANEOUS (X + Y) 108 M/MIN
- STROKE SEQUENCE PUNCHING: STEP WIDTH 1 MM = 900 RPM
- STEP WIDTH 25 MM = 420 RPM
- STROKE SEQUENCE SIGNING 2,200 RPM
- C-AXIS 3 RPM
- TOOLS: LINEAR MAGAZINE WITH 19 TOOLS
- NUMBER OF TOOLS WITH MULTITOOL 19 TO 190
- ROTATION OF ALL TOOLS 360°
- TOOL CHANGE TIME: SINGLE TOOL APPROX. 3.5 S
- MULTITOOL APPROX. 0.9 S
- MAX. PUNCHING DIAMETER SINGLE STROKE 76 MM
- STANDARD MULTICUT 200 MM
- PROGRAMMABLE PARTS CHUTE
- MAX. TOOL CHANGE TIME: SINGLE TOOL APPROX. 3.5 S, MULTITOOL APPROX. 0.9 S
- MAX. PUNCHING DIAMETER SINGLE STROKE 76 MM
- STANDARD MULTICUT 200 MM
- PROGRAMMABLE PARTS CHUTE
- MAX. TOOL CHANGE TIME: SINGLE TOOL APPROX. 0.5 S
- PART SIZE 200 X 200 MM
- SORTABLE IN 2 CONTAINERS
- ACCURACY POSITION DEVIATION +/- 0.1 MM
- AVERAGE POSITION SCATTER +/- 0.03 MM
- CONTROL: TRUMPF CNC CONTROL
- BASIS: BOSCH 3
- COLOUR MONITOR WITH A 10.4 SCREEN
- HARD DISK MEMORY WITH 300 MEGABYTE FOR NC PROGRAMS
- DISK DRIVES
- CONSUMPTION VALUES: ELECTRICAL CONNECTION 18 KVA, ELECTR
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ref.nr. 00546
manufacturer haas model vf 2 series built in 2012
hours of operation shifts
spindle run time approx. 6425 h haas cnc control (based on fanuc system)
high-performance spindle with vector dual drive
automatic lubrication system, oil separator
high speed brushless ac servo-motors
1 mb program memory, 5 free m-functions 15 "lcd color screen, usb / rs 232 interface
synchronous thread cutting
refrigerant system with inline direct drive specifications v 208 l tank
traverse path x/y axis 762 mm / 406 mm
travel in z axis 508 mm
machine table lxw 914mmx356mm
maximum table load 1361 kg
spindle mount sk40 din 69871 maximum speed range new 8100 min-1
torque (at 2000 min-1) 122nm, with transmission up to 450rpm 339 nm spindle motor max power (10% ed) 14, 9kw
rapid traverse x axis 25 m / min
rapid traverse y + z axis 25 m / min
maximum feed 16.5 m / min
number of tools 24
max werkzeugdurchm. / (full) weight 89mm / 5.4 kg tool change time 2.8 lateral ones. magazine chip-to-chip time approx. 	3.6 side. magazine positioning accuracy â±0. 0051
repetition accuracy â±0. 0025
machine weight, kg: 3311
the t-slot width 16mm
	
incl. renishaw measuring sensor
ethernet interface
base unit (10, 120) closing date for kw 16/17
 REF.NR. 00546 MANUFACTURER HAAS MODEL VF 2 SERIES BUILT IN 2012 HOURS OF OPERATION SHIFTS SPINDLE RUN TIME APPROX. 6425 H HAAS CNC CONTROL (BASED ON FANUC SYSTEM) HIGH-PERFORMANCE SPINDLE WITH VECTOR DUAL DRIVE AUTOMATIC LUBRICATION SYSTEM, OIL SEPARATOR HIGH SPEED BRUSHLESS AC SERVO-MOTORS 1 MB PROGRAM MEMORY, 5 FREE M-FUNCTIONS 15 "LCD COLOR SCREEN, USB / RS 232 INTERFACE SYNCHRONOUS THREAD CUTTING REFRIGERANT SYSTEM WITH INLINE DIRECT DRIVE SPECIFICATIONS V 208 L TANK TRAVERSE PATH X/Y AXIS 762 MM / 406 MM TRAVEL IN Z AXIS 508 MM MACHINE TABLE LXW 914MMX356MM MAXIMUM TABLE LOAD 1361 KG SPINDLE MOUNT SK40 DIN 69871 MAXIMUM SPEED RANGE NEW 8100 MIN-1 TORQUE (AT 2000 MIN-1) 122NM, WITH TRANSMISSION UP TO 450RPM 339 NM SPINDLE MOTOR MAX POWER (10% ED) 14, 9KW RAPID TRAVERSE X AXIS 25 M / MIN RAPID TRAVERSE Y + Z AXIS 25 M / MIN MAXIMUM FEED 16.5 M / MIN NUMBER OF TOOLS 24 MAX WERKZEUGDURCHM. / (FULL) WEIGHT 89MM / 5.4 KG TOOL CHANGE TIME 2.8 LATERAL ONES. MAGAZINE CHIP-TO-CHIP TIME APPROX. 3.6 SIDE. MAGAZINE POSITIONING ACCURACY &ACIRC;&PLUSMN;0. 0051 REPETITION ACCURACY &ACIRC;&PLUSMN;0. 0025 MACHINE WEIGHT, KG: 3311 THE T-SLOT WIDTH 16MM INCL. RENISHAW MEASURING SENSOR ETHERNET INTERFACE BASE UNIT (10, 120) CLOSING DATE FOR KW 16/17
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Ubicación: Land-x-travel: 762 mm<br/>y-travel: 508 mm<br/>z-travel: 508 mm<br/>control:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>vertical 5-axis machining center<br/><br/>operating hours spindle approx. 1750<br/><br/>technical specifications:<br/>travels x 762mm / y 508mm / z 508mm<br/>traverse speed 423 mm / s<br/>spindle high performance spindle<br/>spindle speed max. 15,000 rpm.<br/>motor power ac 22.4 kw<br/>tool holder sk 40<br/>tool places 40 + 1<br/>4th / 5th axis b and c axes high speed 150 degrees / s<br/>table size 630 x 500 mm<br/>table load max. 300 kg<br/><br/>equipment:<br/>chip conveyor<br/>internal cooling through the spindle 70bar<br/>fine filter system for internal cooling<br/>visual quick programming system<br/>renishaw tool and workpiece measurement<br/>various tool holders and clamping devices<br/><br/><br/><br/><br/> X-TRAVEL: 762 MM
Y-TRAVEL: 508 MM
Z-TRAVEL: 508 MM
CONTROL:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
VERTICAL 5-AXIS MACHINING CENTER

OPERATING HOURS SPINDLE APPROX. 1750

TECHNICAL SPECIFICATIONS:
TRAVELS X 762MM / Y 508MM / Z 508MM
TRAVERSE SPEED 423 MM / S
SPINDLE HIGH PERFORMANCE SPINDLE
SPINDLE SPEED MAX. 15,000 RPM.
MOTOR POWER AC 22.4 KW
TOOL HOLDER SK 40
TOOL PLACES 40 + 1
4TH / 5TH AXIS B AND C AXES HIGH SPEED 150 DEGREES / S
TABLE SIZE 630 X 500 MM
TABLE LOAD MAX. 300 KG

EQUIPMENT:
CHIP CONVEYOR
INTERNAL COOLING THROUGH THE SPINDLE 70BAR
FINE FILTER SYSTEM FOR INTERNAL COOLING
VISUAL QUICK PROGRAMMING SYSTEM
RENISHAW TOOL AND WORKPIECE MEASUREMENT
VARIOUS TOOL HOLDERS AND CLAMPING DEVICES




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-ref.nr. 00545 designation of the system of cnc lathe with short rod loader manufacturer haas model sl 10 series year 2009 operating hours shifts
spindle run time approx. 6900 h standard equipment haas cnc control visual quick code (dialog programming)
programming support through g - / m-commands manual werkzeugvermersseinrichtung coolant system (approx. 4 bar pressure)
digital servo spindle drive
brushless ac servo-motors
electronic temperature compensation system
sysnchronisietes threaded drill / cut complete hollow clamping device incl. chuck
spiral chip conveyors (discharge chute to the right)
spindle orientation +-0.1 degrees 15 ' lcd farbbildschilm usb - rs 232 interface
user macro v
1mb program memory; 5 free m functions
automatic lubrication system, oil separator
tool time monitoring
revolver in bolt on vdi 12 stations o. wzg halter specifications umlaufdurchm. machine bed 413 mm
umlaufdurchm. over bed slide 203 mm
rotary chuck sizes 165 mm / * 210 mm
bar passage 44 mm / * 50 mm
max rotation ã? top size 279 mm / 419 mm
maximum speed of main spindle 6000 / * 4000 min-1
torque 102 nm to 650 min-1
torque b series 209 nm to 650 min-1 maximum main spindle drive power 11, 2kw / * 14.9 kw
spindle bore 59 mm / 76 mm
hole in the train pipe 46 mm / * 52 mm
traverse paths x axis / z axis 159 mm / 356 mm
rapid traverse "x z" 30 m / min
revolver / stations vdi 30/12 (6 x drill, outdoor deer)
revolver switching time station - station 1 sec
positioning accuracy â±0. 0051
repetition accuracy â±0. 0025
machine weight 2495 kg incl. bar loader deadline and tailstock free from kw 16/17 
 REF.NR. 00545 DESIGNATION OF THE SYSTEM OF CNC LATHE WITH SHORT ROD LOADER MANUFACTURER HAAS MODEL SL 10 SERIES YEAR 2009 OPERATING HOURS SHIFTS SPINDLE RUN TIME APPROX. 6900 H STANDARD EQUIPMENT HAAS CNC CONTROL VISUAL QUICK CODE (DIALOG PROGRAMMING) PROGRAMMING SUPPORT THROUGH G - / M-COMMANDS MANUAL WERKZEUGVERMERSSEINRICHTUNG COOLANT SYSTEM (APPROX. 4 BAR PRESSURE) DIGITAL SERVO SPINDLE DRIVE BRUSHLESS AC SERVO-MOTORS ELECTRONIC TEMPERATURE COMPENSATION SYSTEM SYSNCHRONISIETES THREADED DRILL / CUT COMPLETE HOLLOW CLAMPING DEVICE INCL. CHUCK SPIRAL CHIP CONVEYORS (DISCHARGE CHUTE TO THE RIGHT) SPINDLE ORIENTATION +-0.1 DEGREES 15 ' LCD FARBBILDSCHILM USB - RS 232 INTERFACE USER MACRO V 1MB PROGRAM MEMORY; 5 FREE M FUNCTIONS AUTOMATIC LUBRICATION SYSTEM, OIL SEPARATOR TOOL TIME MONITORING REVOLVER IN BOLT ON VDI 12 STATIONS O. WZG HALTER SPECIFICATIONS UMLAUFDURCHM. MACHINE BED 413 MM UMLAUFDURCHM. OVER BED SLIDE 203 MM ROTARY CHUCK SIZES 165 MM / * 210 MM BAR PASSAGE 44 MM / * 50 MM MAX ROTATION &ATILDE;? TOP SIZE 279 MM / 419 MM MAXIMUM SPEED OF MAIN SPINDLE 6000 / * 4000 MIN-1 TORQUE 102 NM TO 650 MIN-1 TORQUE B SERIES 209 NM TO 650 MIN-1 MAXIMUM MAIN SPINDLE DRIVE POWER 11, 2KW / * 14.9 KW SPINDLE BORE 59 MM / 76 MM HOLE IN THE TRAIN PIPE 46 MM / * 52 MM TRAVERSE PATHS X AXIS / Z AXIS 159 MM / 356 MM RAPID TRAVERSE "X Z" 30 M / MIN REVOLVER / STATIONS VDI 30/12 (6 X DRILL, OUTDOOR DEER) REVOLVER SWITCHING TIME STATION - STATION 1 SEC POSITIONING ACCURACY &ACIRC;&PLUSMN;0. 0051 REPETITION ACCURACY &ACIRC;&PLUSMN;0. 0025 MACHINE WEIGHT 2495 KG INCL. BAR LOADER DEADLINE AND TAILSTOCK FREE FROM KW 16/17
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Precio: used machinery auction RESALE 18.000 €
Ubicación: Land-weight approx.: 6000 kg<br/>control: xp 600/biesse works <br/>dimensions (l x w x h) approx.: 6000 x 2800 x 1900 mm<br/>working length x-axis: 3200 mm<br/>working width y-axis: 1300 mm<br/>working height y-axis: 160 mm<br/>tool changer: sì <br/>vacuum pump: 110 cbm/h<br/>drilling head vertical x-axis: 7 piece<br/>drilling head vertical y-axis: 5 piece<br/>drilling head horizontal x-axis: 4 piece<br/>drilling head horizontal y-axis: 2 piece<br/>saw unit: 1 <br/>total power approx: 25.1 kw<br/>description: x axis stroke 3200 mm<br> y axis stroke 1300 mm<br> z axis stroke 160 mm<br> machine programming & control system xp 600/biesse works<br> 2 working fields<br> digital display for workloads visualization<br> 6 manually adjustable bars for support suckers<br> 4 pneumatic bakelite bars for panels load/unload<br> 3 manually adjustable suckers for any bar<br> 12-positions automatic tool changer system<br> 1 vertical electrospindle, automatic tool change<br> boring head with 18 spindles<br> integrated blade for milling<br> automatic woodchips evacuation system through powered conveyor belt<br> 1 vacuum pump<br> see photo WEIGHT APPROX.: 6000 KG
CONTROL: XP 600/BIESSE WORKS
DIMENSIONS (L X W X H) APPROX.: 6000 X 2800 X 1900 MM
WORKING LENGTH X-AXIS: 3200 MM
WORKING WIDTH Y-AXIS: 1300 MM
WORKING HEIGHT Y-AXIS: 160 MM
TOOL CHANGER: Sì
VACUUM PUMP: 110 CBM/H
DRILLING HEAD VERTICAL X-AXIS: 7 PIECE
DRILLING HEAD VERTICAL Y-AXIS: 5 PIECE
DRILLING HEAD HORIZONTAL X-AXIS: 4 PIECE
DRILLING HEAD HORIZONTAL Y-AXIS: 2 PIECE
SAW UNIT: 1
TOTAL POWER APPROX: 25.1 KW
DESCRIPTION: X AXIS STROKE 3200 MM
Y AXIS STROKE 1300 MM
Z AXIS STROKE 160 MM
MACHINE PROGRAMMING & CONTROL SYSTEM XP 600/BIESSE WORKS
2 WORKING FIELDS
DIGITAL DISPLAY FOR WORKLOADS VISUALIZATION
6 MANUALLY ADJUSTABLE BARS FOR SUPPORT SUCKERS
4 PNEUMATIC BAKELITE BARS FOR PANELS LOAD/UNLOAD
3 MANUALLY ADJUSTABLE SUCKERS FOR ANY BAR
12-POSITIONS AUTOMATIC TOOL CHANGER SYSTEM
1 VERTICAL ELECTROSPINDLE, AUTOMATIC TOOL CHANGE
BORING HEAD WITH 18 SPINDLES
INTEGRATED BLADE FOR MILLING
AUTOMATIC WOODCHIPS EVACUATION SYSTEM THROUGH POWERED CONVEYOR BELT
1 VACUUM PUMP
SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-stock nr 1399
manufacturer fromach srl, italy
machine rollforming line for tile
y.o.m. 2003
condition on production very good condition
location greece
line direction left to right
raw material prepainted coil
min thickness 0.35 mm
max thickness 0.8 mm
max width 1250 mm
max weight of coil 12 tons
line length 24,5 meters
units of the line : decoiler with coil car capacity 12 tons bench for rollforming, with motor, supporting 4 cassettes each cassette has 4 passages, x 4 cassettes, total 16 passages complete electric plan console board with electronic programming set up for STOCK NR 1399 MANUFACTURER FROMACH SRL, ITALY MACHINE ROLLFORMING LINE FOR TILE Y.O.M. 2003 CONDITION ON PRODUCTION VERY GOOD CONDITION LOCATION GREECE LINE DIRECTION LEFT TO RIGHT RAW MATERIAL PREPAINTED COIL MIN THICKNESS 0.35 MM MAX THICKNESS 0.8 MM MAX WIDTH 1250 MM MAX WEIGHT OF COIL 12 TONS LINE LENGTH 24,5 METERS UNITS OF THE LINE : DECOILER WITH COIL CAR CAPACITY 12 TONS BENCH FOR ROLLFORMING, WITH MOTOR, SUPPORTING 4 CASSETTES EACH CASSETTE HAS 4 PASSAGES, X 4 CASSETTES, TOTAL 16 PASSAGES COMPLETE ELECTRIC PLAN CONSOLE BOARD WITH ELECTRONIC PROGRAMMING SET UP FOR "TILE PROFILE" (SEE ATTACHMENT) PRESS COMPLETE WITH DIE HYDRAULIC SHEARING MACHINE FOR CUTTING THE PROFILE DISCHARGE BENCH
Vendedor: PROFIT Machinery Point Ltd
Año de construcción: usado
Precio: used machinery auction RESALE 40.000 €
Ubicación: Land-weight approx.: 7500 kg<br/>control: biesse bh 660 <br/>dimensions (l x w x h) approx.: 18000 x 3800 x 1900 mm<br/>c-axis: sì <br/>working length x-axis: 3765 mm<br/>working width y-axis: 1875 mm<br/>working height y-axis: 160 mm<br/>tool changer: si <br/>drilling head vertical x-axis: 17 piece<br/>drilling head vertical y-axis: 12 piece<br/>drilling head horizontal x-axis: 4 piece<br/>drilling head horizontal y-axis: 2 piece<br/>saw unit: 1 <br/>total power approx: 42.3 kw<br/>description: x axis stroke 3765 mm<br> y axis stroke 1875 mm<br> z axis stroke 160 mm<br> machine programming & control system biesse bh 660<br> automatic loadiing system through lateral lifting table<br> barcode label maker on machine side<br> 18-positions automatic tool changer system<br> 1 vertical electrospindle with c vector axis, automatic tool change<br> boring head with 35 spindles<br> integrated blade for milling on x axis<br> automatic unload system through pusher and powered conveyor belt<br> 2 vacuum pumps<br> see photo WEIGHT APPROX.: 7500 KG
CONTROL: BIESSE BH 660
DIMENSIONS (L X W X H) APPROX.: 18000 X 3800 X 1900 MM
C-AXIS: Sì
WORKING LENGTH X-AXIS: 3765 MM
WORKING WIDTH Y-AXIS: 1875 MM
WORKING HEIGHT Y-AXIS: 160 MM
TOOL CHANGER: SI
DRILLING HEAD VERTICAL X-AXIS: 17 PIECE
DRILLING HEAD VERTICAL Y-AXIS: 12 PIECE
DRILLING HEAD HORIZONTAL X-AXIS: 4 PIECE
DRILLING HEAD HORIZONTAL Y-AXIS: 2 PIECE
SAW UNIT: 1
TOTAL POWER APPROX: 42.3 KW
DESCRIPTION: X AXIS STROKE 3765 MM
Y AXIS STROKE 1875 MM
Z AXIS STROKE 160 MM
MACHINE PROGRAMMING & CONTROL SYSTEM BIESSE BH 660
AUTOMATIC LOADIING SYSTEM THROUGH LATERAL LIFTING TABLE
BARCODE LABEL MAKER ON MACHINE SIDE
18-POSITIONS AUTOMATIC TOOL CHANGER SYSTEM
1 VERTICAL ELECTROSPINDLE WITH C VECTOR AXIS, AUTOMATIC TOOL CHANGE
BORING HEAD WITH 35 SPINDLES
INTEGRATED BLADE FOR MILLING ON X AXIS
AUTOMATIC UNLOAD SYSTEM THROUGH PUSHER AND POWERED CONVEYOR BELT
2 VACUUM PUMPS
SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 198.000 €
Ubicación: Land-laser cutting machine trumpf trulaser 5030 incl. lift master

trulaser 5030
equipped with:
laser truflow 6000 and
control siemens sinumerik 840 d
workspace:
1500 x 3000 mm
electrical equipment:
three-phase 400 v / 50 hz
white ral 9002 / blue ral 5010

basic equipment:
ibjwrk9
nitroline high pressure cutting
laser cutting head 250 mm lens
universal cutting head schneilwechseleinrichtung
uti with fieldbus connection
autom. sheet metal outer edge detection
controlline height control and process control
pierceline process control system
position lasers diode
progr. / pressure adjustment of selection of cutting gas
progr. performance cycles
microweld
plasmaline plasmasensorik
sprintline in all thicknesses
contourline
fastline
focusline
laser power control
spraying device
logbook function laser
faster autom. pallet changer
auotm. nozzle cleaning
lighting of workroom
conveyors for small parts / waste
multi chamber extraction
compact dust collector
tft color display
automatic switch-off
safety devices
shop floor programming
rj-45 network port
network connection incl. installation
usb

conveyor with tank
nozzle changer
add. laser cutting head with 150 mm high speed
adaptation stopa warehouse
storage interface
cabin safety devices for storage connectivity.
2. light barrier circuit 4 x 200 lt. kegs for compact dust collector

lift master r setting up symmetric
loading links
magnet device, sheet metal thickness gauge, changeable
tine
separation of thin sheet metal
p-mode
2 pallets with steel
stopa parts for 2 pallets LASER CUTTING MACHINE TRUMPF TRULASER 5030 INCL. LIFT MASTER TRULASER 5030 EQUIPPED WITH: LASER TRUFLOW 6000 AND CONTROL SIEMENS SINUMERIK 840 D WORKSPACE: 1500 X 3000 MM ELECTRICAL EQUIPMENT: THREE-PHASE 400 V / 50 HZ WHITE RAL 9002 / BLUE RAL 5010 BASIC EQUIPMENT: IBJWRK9 NITROLINE HIGH PRESSURE CUTTING LASER CUTTING HEAD 250 MM LENS UNIVERSAL CUTTING HEAD SCHNEILWECHSELEINRICHTUNG UTI WITH FIELDBUS CONNECTION AUTOM. SHEET METAL OUTER EDGE DETECTION CONTROLLINE HEIGHT CONTROL AND PROCESS CONTROL PIERCELINE PROCESS CONTROL SYSTEM POSITION LASERS DIODE PROGR. / PRESSURE ADJUSTMENT OF SELECTION OF CUTTING GAS PROGR. PERFORMANCE CYCLES MICROWELD PLASMALINE PLASMASENSORIK SPRINTLINE IN ALL THICKNESSES CONTOURLINE FASTLINE FOCUSLINE LASER POWER CONTROL SPRAYING DEVICE LOGBOOK FUNCTION LASER FASTER AUTOM. PALLET CHANGER AUOTM. NOZZLE CLEANING LIGHTING OF WORKROOM CONVEYORS FOR SMALL PARTS / WASTE MULTI CHAMBER EXTRACTION COMPACT DUST COLLECTOR TFT COLOR DISPLAY AUTOMATIC SWITCH-OFF SAFETY DEVICES SHOP FLOOR PROGRAMMING RJ-45 NETWORK PORT NETWORK CONNECTION INCL. INSTALLATION USB CONVEYOR WITH TANK NOZZLE CHANGER ADD. LASER CUTTING HEAD WITH 150 MM HIGH SPEED ADAPTATION STOPA WAREHOUSE STORAGE INTERFACE CABIN SAFETY DEVICES FOR STORAGE CONNECTIVITY. 2. LIGHT BARRIER CIRCUIT 4 X 200 LT. KEGS FOR COMPACT DUST COLLECTOR LIFT MASTER R SETTING UP SYMMETRIC LOADING LINKS MAGNET DEVICE, SHEET METAL THICKNESS GAUGE, CHANGEABLE TINE SEPARATION OF THIN SHEET METAL P-MODE 2 PALLETS WITH STEEL STOPA PARTS FOR 2 PALLETS
Vendedor: 3W Handelsgesellschaft m.b.H
Año de construcción: usado
Precio: 27.000 EU€
Ubicación: Land-the machine is a special four-roller winder, intended for folding sheets al m. al. reflector. it has 3 independent lower rollers shortening the time to a minimum roll. the rollers are supported by adjustable, bearings slides for easy compensation of the deflection depending on the thickness and hardness of the material. compensation of sagging upper roller is realized by longitudinal beam. all rollers are driven. the spinning process is carried out without slip to prevent scratching of the workpiece. cnc - equipped with an interpolation, it is a simultaneous rotation bending rolls, along with their shift. all rolls are chrome-plated and polished. all axes are programmable. the machine has the possibility of rolling difficult elliptical shapes. THE MACHINE IS A SPECIAL FOUR-ROLLER WINDER, INTENDED FOR FOLDING SHEETS AL M. AL. REFLECTOR. IT HAS 3 INDEPENDENT LOWER ROLLERS SHORTENING THE TIME TO A MINIMUM ROLL. THE ROLLERS ARE SUPPORTED BY ADJUSTABLE, BEARINGS SLIDES FOR EASY COMPENSATION OF THE DEFLECTION DEPENDING ON THE THICKNESS AND HARDNESS OF THE MATERIAL. COMPENSATION OF SAGGING UPPER ROLLER IS REALIZED BY LONGITUDINAL BEAM. ALL ROLLERS ARE DRIVEN. THE SPINNING PROCESS IS CARRIED OUT WITHOUT SLIP TO PREVENT SCRATCHING OF THE WORKPIECE. CNC - EQUIPPED WITH AN INTERPOLATION, IT IS A SIMULTANEOUS ROTATION BENDING ROLLS, ALONG WITH THEIR SHIFT. ALL ROLLS ARE CHROME-PLATED AND POLISHED. ALL AXES ARE PROGRAMMABLE. THE MACHINE HAS THE POSSIBILITY OF ROLLING DIFFICULT ELLIPTICAL SHAPES.
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 10.900 €
Ubicación: Land-range of motion, with motor / manual:
x (longitudinal)... 490 / 500 mm
y (transverse)... 290 / 300 mm
z (vertical)... without protection bellows... 390 / 400 mm
z (vertical)... with protective bellows... 345 / 355 mm
vertical milling head across movable... / 200 mm

weight of the machine... 1670 kg

control:
programmable keys control cnc 2102 with screen display RANGE OF MOTION, WITH MOTOR / MANUAL: X (LONGITUDINAL)... 490 / 500 MM Y (TRANSVERSE)... 290 / 300 MM Z (VERTICAL)... WITHOUT PROTECTION BELLOWS... 390 / 400 MM Z (VERTICAL)... WITH PROTECTIVE BELLOWS... 345 / 355 MM VERTICAL MILLING HEAD ACROSS MOVABLE... / 200 MM WEIGHT OF THE MACHINE... 1670 KG CONTROL: PROGRAMMABLE KEYS CONTROL CNC 2102 WITH SCREEN DISPLAY
Vendedor: 3W Handelsgesellschaft m.b.H
Año de construcción: usado
Ubicación: Land-new hot press, hydraulically\r\nbrand: italpresse \r\ntype xl/6 30-13 pe\r\n\r\n- electrical - heating plates: 3000 x 1300 mm \r\n- total pressure: 120 to. \r\n- number of hot plates: 2 pc. \r\n- number of floors: 1 pc. \r\n- stroke: 350 mm \r\n- day light opening: 350 mm \r\n- all-round feeding \r\n- number of cylinders: 6 pc. \r\n- diameter of cylinder: 85 mm \r\n- power consumption (hydraulic unit): 3 kw\r\n- electric hot plates of solid hard aluminium with installed heating elements \r\n- heating power 22 kw \r\n- high pressure isolation plates  \r\n- operating temperature: 90° c. \r\n- max. temperature: 120° c. \r\n- supply: 400v/50 hz \r\n- safety accordance with ce standard \r\n\r\nstandard equipment:\r\n- movement of the press table with rack and pinion parallel guidance at two corners of the press table made from self-lubricating material \r\n- electronic control unit for controlling and monitoring the machine \r\n- digital timer for setting the pressing time and automatic opening \r\n- digital input and monitoring of the pressing pressure \r\n- timer for programming the starting time of heater\r\n- digital display of diagnosis and fault messages \r\n- safety circuit with two-hand control \r\n- emergency strip wire \r\n- safety holder for the lower press table \r\n\r\noptional for an extra charge:\r\n- opening / cylinder stroke 600 mm \r\n- electrical inactivation of the left cylinder bank \r\n- additional charge for ?gold-anodised? heating plates\r\n NEW HOT PRESS, HYDRAULICALLY\R\NBRAND: ITALPRESSE \R\NTYPE XL/6 30-13 PE\R\N\R\N- ELECTRICAL - HEATING PLATES: 3000 X 1300 MM \R\N- TOTAL PRESSURE: 120 TO. \R\N- NUMBER OF HOT PLATES: 2 PC. \R\N- NUMBER OF FLOORS: 1 PC. \R\N- STROKE: 350 MM \R\N- DAY LIGHT OPENING: 350 MM \R\N- ALL-ROUND FEEDING \R\N- NUMBER OF CYLINDERS: 6 PC. \R\N- DIAMETER OF CYLINDER: 85 MM \R\N- POWER CONSUMPTION (HYDRAULIC UNIT): 3 KW\R\N- ELECTRIC HOT PLATES OF SOLID HARD ALUMINIUM WITH INSTALLED HEATING ELEMENTS \R\N- HEATING POWER 22 KW \R\N- HIGH PRESSURE ISOLATION PLATES \R\N- OPERATING TEMPERATURE: 90° C. \R\N- MAX. TEMPERATURE: 120° C. \R\N- SUPPLY: 400V/50 HZ \R\N- SAFETY ACCORDANCE WITH CE STANDARD \R\N\R\NSTANDARD EQUIPMENT:\R\N- MOVEMENT OF THE PRESS TABLE WITH RACK AND PINION PARALLEL GUIDANCE AT TWO CORNERS OF THE PRESS TABLE MADE FROM SELF-LUBRICATING MATERIAL \R\N- ELECTRONIC CONTROL UNIT FOR CONTROLLING AND MONITORING THE MACHINE \R\N- DIGITAL TIMER FOR SETTING THE PRESSING TIME AND AUTOMATIC OPENING \R\N- DIGITAL INPUT AND MONITORING OF THE PRESSING PRESSURE \R\N- TIMER FOR PROGRAMMING THE STARTING TIME OF HEATER\R\N- DIGITAL DISPLAY OF DIAGNOSIS AND FAULT MESSAGES \R\N- SAFETY CIRCUIT WITH TWO-HAND CONTROL \R\N- EMERGENCY STRIP WIRE \R\N- SAFETY HOLDER FOR THE LOWER PRESS TABLE \R\N\R\NOPTIONAL FOR AN EXTRA CHARGE:\R\N- OPENING / CYLINDER STROKE 600 MM \R\N- ELECTRICAL INACTIVATION OF THE LEFT CYLINDER BANK \R\N- ADDITIONAL CHARGE FOR ?GOLD-ANODISED? HEATING PLATES\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BERRONE types: