35 ofertas

Año de construcción: usado
Ubicación: Land-for sale is a barely used storage paternoster by 2005.

the machine has 12 shelves which can be loaded with 120 kg each.
a shelf is equipped with 4 ausziebaren drawers and all others with a lower shelf. the mezzanine can be removed with higher goods.

the overall dimensions of the machine is 2560mm / 1160 + 110mm electronic w/d/h / 2600mm.

the specialist interior measure floor w/d/h 2200 mm / 408 mm / 300 mm.

on a surface of 2, 97 mâ², up to 21, 54 m 2 of automatic storage area can be generated with this machine.
 gladly we make you an offer
 FOR SALE IS A BARELY USED STORAGE PATERNOSTER BY 2005. THE MACHINE HAS 12 SHELVES WHICH CAN BE LOADED WITH 120 KG EACH. A SHELF IS EQUIPPED WITH 4 AUSZIEBAREN DRAWERS AND ALL OTHERS WITH A LOWER SHELF. THE MEZZANINE CAN BE REMOVED WITH HIGHER GOODS. THE OVERALL DIMENSIONS OF THE MACHINE IS 2560MM / 1160 + 110MM ELECTRONIC W/D/H / 2600MM. THE SPECIALIST INTERIOR MEASURE FLOOR W/D/H 2200 MM / 408 MM / 300 MM. ON A SURFACE OF 2, 97 M², UP TO 21, 54 M 2 OF AUTOMATIC STORAGE AREA CAN BE GENERATED WITH THIS MACHINE. GLADLY WE MAKE YOU AN OFFER
Vendedor: Montageservice Heindrichs
Año de construcción: usado
Ubicación: Land-pressure:40 t<br/>throat: mm<br/>stroke:500 mm<br/>total power requirement:5 kw<br/>weight of the machine ca.:2,5 t<br/>dimensions of the machine ca.:2950 x 1300 x 2000 mm<br/>return capacity:6 t<br/>work height max.:700 mm<br/>pre-running speed:250 mm/sec<br/>:20 mm<br/>return speed:200 mm/sec<br/>pestle plate:500 x 400 mm<br/>table plate:600 x 450 mit t-nuten mm<br/>table cut-out:150 mm durchmesser<br/>table height:1000 mm<br/>cylinder: mm<br/>:200 l<br/>oil cooling:elektrisch <br/>light-barrier:700 mm<br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>hydraulic components bosch/rexroth: <br/>: <br/>: <br/>: <br/><br/> PRESSURE:40 T
THROAT: MM
STROKE:500 MM
TOTAL POWER REQUIREMENT:5 KW
WEIGHT OF THE MACHINE CA.:2,5 T
DIMENSIONS OF THE MACHINE CA.:2950 X 1300 X 2000 MM
RETURN CAPACITY:6 T
WORK HEIGHT MAX.:700 MM
PRE-RUNNING SPEED:250 MM/SEC
:20 MM
RETURN SPEED:200 MM/SEC
PESTLE PLATE:500 X 400 MM
TABLE PLATE:600 X 450 MIT T-NUTEN MM
TABLE CUT-OUT:150 MM DURCHMESSER
TABLE HEIGHT:1000 MM
CYLINDER: MM
:200 L
OIL COOLING:ELEKTRISCH
LIGHT-BARRIER:700 MM
:
:
:
:
:
:
:
:
:
:
:
:
:
:
HYDRAULIC COMPONENTS BOSCH/REXROTH:
:
:
:

Vendedor: Hidrobrasil
Año de construcción: usado
Ubicación: Land-ideal for the pick area.

total amount: 250lfm

levels: 5 storage levels per box
 IDEAL FOR THE PICK AREA. TOTAL AMOUNT: 250LFM LEVELS: 5 STORAGE LEVELS PER BOX
Vendedor: DLK GmbH
Año de construcción: usado
Ubicación: siemens control system:
hydraulic components bosch rexroth:
interior of the press with leds illuminated:
pressure, speed, travel adjustable via monitor controls:
remote control siemens for remote maintenance:

.gif" alt="Land-pressure:40 t
passage width:2500 x 1300 mm
stroke:1000 mm
total power requirement:7 kw
weight of the machine ca.:12 t
draw back pressure:4 t
controll:zweihandbedienung
cylinder:1
work height max.:2200 (zwischen stößel und tischplatte) mm
working area:2500 x 1300 mm
table dimensions:2800 x 1300 mm
pestle plate:2800 x 1300 mm
table height:800 mm
pre-running speed:9,8 mm/sec
work speed:9,8 mm/min
return speed:18 mm/sec
pressure controll:
oil tank capacity:150 l
electronic components ace schmersal:
traverse control: adjustable via monitor:
operation: manual, semi-automatic and fully automatic:
maintenance platform: at the top of the press:
sturdy machine body with solid welded construction, manufactured according to din 8651:
low maintenance and reliability due to robust technology:
induction-hardened and chrome plated cylinder:
including reserve (capacity max. 44 to):
presstime adjustable from 0 to 1200 seconds:
energy saving function: power supply decreases to approx. 1.5 kw with closed press:
monitor siemens 9\":
siemens control system:
hydraulic components bosch rexroth:
interior of the press with leds illuminated:
pressure, speed, travel adjustable via monitor controls:
remote control siemens for remote maintenance:

" style="height: 18px;"> PRESSURE:40 T
PASSAGE WIDTH:2500 X 1300 MM
STROKE:1000 MM
TOTAL POWER REQUIREMENT:7 KW
WEIGHT OF THE MACHINE CA.:12 T
DRAW BACK PRESSURE:4 T
CONTROLL:ZWEIHANDBEDIENUNG
CYLINDER:1
WORK HEIGHT MAX.:2200 (ZWISCHEN STößEL UND TISCHPLATTE) MM
WORKING AREA:2500 X 1300 MM
TABLE DIMENSIONS:2800 X 1300 MM
PESTLE PLATE:2800 X 1300 MM
TABLE HEIGHT:800 MM
PRE-RUNNING SPEED:9,8 MM/SEC
WORK SPEED:9,8 MM/MIN
RETURN SPEED:18 MM/SEC
PRESSURE CONTROLL:
OIL TANK CAPACITY:150 L
ELECTRONIC COMPONENTS ACE SCHMERSAL:
TRAVERSE CONTROL: ADJUSTABLE VIA MONITOR:
OPERATION: MANUAL, SEMI-AUTOMATIC AND FULLY AUTOMATIC:
MAINTENANCE PLATFORM: AT THE TOP OF THE PRESS:
STURDY MACHINE BODY WITH SOLID WELDED CONSTRUCTION, MANUFACTURED ACCORDING TO DIN 8651:
LOW MAINTENANCE AND RELIABILITY DUE TO ROBUST TECHNOLOGY:
INDUCTION-HARDENED AND CHROME PLATED CYLINDER:
INCLUDING RESERVE (CAPACITY MAX. 44 TO):
PRESSTIME ADJUSTABLE FROM 0 TO 1200 SECONDS:
ENERGY SAVING FUNCTION: POWER SUPPLY DECREASES TO APPROX. 1.5 KW WITH CLOSED PRESS:
MONITOR SIEMENS 9\":
SIEMENS CONTROL SYSTEM:
HYDRAULIC COMPONENTS BOSCH REXROTH:
INTERIOR OF THE PRESS WITH LEDS ILLUMINATED:
PRESSURE, SPEED, TRAVEL ADJUSTABLE VIA MONITOR CONTROLS:
REMOTE CONTROL SIEMENS FOR REMOTE MAINTENANCE:

Vendedor: Hidrobrasil
Año de construcción: usado
Precio: 14.000 €
Ubicación: Land-forklift italmacchine
for sale exclusively on 15 november 2018,10-00 o'clock in cazzago san martino, brescia
brand: italmacchine
model: lift 2009
year: 2002
hours: 2,415
capacity: 2500 kg
accessories: # 2 hydraulic outriggers full front forks with hydraulic device that moves full bucket wheel excavator registration card and user and maintenance manuals
for more information contact us at + 39 392 4703149 monday to friday from 8:30 to 13:00 and from 14:00 to 19:00 FORKLIFT ITALMACCHINE FOR SALE EXCLUSIVELY ON 15 NOVEMBER 2018,10-00 O'CLOCK IN CAZZAGO SAN MARTINO, BRESCIA BRAND: ITALMACCHINE MODEL: LIFT 2009 YEAR: 2002 HOURS: 2,415 CAPACITY: 2500 KG ACCESSORIES: # 2 HYDRAULIC OUTRIGGERS FULL FRONT FORKS WITH HYDRAULIC DEVICE THAT MOVES FULL BUCKET WHEEL EXCAVATOR REGISTRATION CARD AND USER AND MAINTENANCE MANUALS FOR MORE INFORMATION CONTACT US AT + 39 392 4703149 MONDAY TO FRIDAY FROM 8:30 TO 13:00 AND FROM 14:00 TO 19:00
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-pressure:40  t<br/>stroke:250 mm<br/>no. of strokes: hub/min<br/>weight of the machine ca.: t<br/>return capacity:6,3 t<br/>motor:5,5 kw<br/>max working height:450 mm<br/>:90 mm/sec.<br/>:10 mm/sec.<br/>spindle stroke:250 mm<br/>pestle plate:500 x 200 mm<br/>table plate:600 x 650 mit t-nuten mm<br/>table cut-out:200 x 170 mm<br/>table height:850 mm<br/>:200 l<br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/><br/> PRESSURE:40 T
STROKE:250 MM
NO. OF STROKES: HUB/MIN
WEIGHT OF THE MACHINE CA.: T
RETURN CAPACITY:6,3 T
MOTOR:5,5 KW
MAX WORKING HEIGHT:450 MM
:90 MM/SEC.
:10 MM/SEC.
SPINDLE STROKE:250 MM
PESTLE PLATE:500 X 200 MM
TABLE PLATE:600 X 650 MIT T-NUTEN MM
TABLE CUT-OUT:200 X 170 MM
TABLE HEIGHT:850 MM
:200 L
:
:
:
:
:
:
:
:

Vendedor: Hidrobrasil
Año de construcción: usado
Ubicación: Land-storage tank with elevating belt with dividers, type: interm.storagetank, serial number: 20053724, year of construction: 2005, 230/400 v, 50 hz, plastic mesh belt, belt width: 670 mm, height dividers: 80 mm, distance between dividers: 160 mm, elevating height: 1550 mm, total dimensions: 4500 mm x 1350 mm x 1750 mm. STORAGE TANK WITH ELEVATING BELT WITH DIVIDERS, TYPE: INTERM.STORAGETANK, SERIAL NUMBER: 20053724, YEAR OF CONSTRUCTION: 2005, 230/400 V, 50 HZ, PLASTIC MESH BELT, BELT WIDTH: 670 MM, HEIGHT DIVIDERS: 80 MM, DISTANCE BETWEEN DIVIDERS: 160 MM, ELEVATING HEIGHT: 1550 MM, TOTAL DIMENSIONS: 4500 MM X 1350 MM X 1750 MM.
Vendedor: HHHTRADING
Año de construcción: usado
Ubicación: Land-pressure:480 t<br/>passage width:2500 mm<br/>stroke:900 mm<br/>total power requirement:62 kw<br/>weight of the machine ca.:54 t<br/>dimensions:ca. 3950 x 2200 x 4850 mm<br/>return capacity:40 t<br/>:2 (synchronisiert) stück<br/>column diameter:250 mm<br/>dayligth:1300 mm<br/>table dimensions:3250 x 1800 mm<br/>:3100 x 1600 mm<br/>ram height:900 mm<br/>table height over floor:1000 mm<br/>table load: t<br/>pre-running speed:200 mm/sec<br/>return speed:200 mm/sec<br/>working speed:5 - 15 mm/sec<br/>:1500 l<br/>quantity of oil:1200 l<br/>pressure control:50 - 400 t<br/>:1400 x 800 mm<br/>capacity of ejector:30 - 60 t<br/>ejector stroke:250 mm<br/>ejector speed:5 - 80 mm/sec<br/>:150 t<br/>robust machine body with solid welded construction: <br/>: <br/>: <br/>ce certificate: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>hydraulic components bosch rexroth: <br/>monitor siemens:12 zoll<br/>: <br/>: <br/>: <br/>: <br/>: <br/>two-hand operation on mobile stand: <br/><br/> PRESSURE:480 T
PASSAGE WIDTH:2500 MM
STROKE:900 MM
TOTAL POWER REQUIREMENT:62 KW
WEIGHT OF THE MACHINE CA.:54 T
DIMENSIONS:CA. 3950 X 2200 X 4850 MM
RETURN CAPACITY:40 T
:2 (SYNCHRONISIERT) STüCK
COLUMN DIAMETER:250 MM
DAYLIGTH:1300 MM
TABLE DIMENSIONS:3250 X 1800 MM
:3100 X 1600 MM
RAM HEIGHT:900 MM
TABLE HEIGHT OVER FLOOR:1000 MM
TABLE LOAD: T
PRE-RUNNING SPEED:200 MM/SEC
RETURN SPEED:200 MM/SEC
WORKING SPEED:5 - 15 MM/SEC
:1500 L
QUANTITY OF OIL:1200 L
PRESSURE CONTROL:50 - 400 T
:1400 X 800 MM
CAPACITY OF EJECTOR:30 - 60 T
EJECTOR STROKE:250 MM
EJECTOR SPEED:5 - 80 MM/SEC
:150 T
ROBUST MACHINE BODY WITH SOLID WELDED CONSTRUCTION:
:
:
CE CERTIFICATE:
:
:
:
:
:
:
HYDRAULIC COMPONENTS BOSCH REXROTH:
MONITOR SIEMENS:12 ZOLL
:
:
:
:
:
TWO-HAND OPERATION ON MOBILE STAND:

Vendedor: Hidrobrasil
Año de construcción: usado
Ubicación: Land-flow rack jungheinrich type e

very good condition, directly from the production!

7 segments available

3 layers per segment

5 pallets per location

a total of 105 pallets

dimensions per segment:

total height 4007 mm
clear channel width 1400 mm
height 1300 mm per layer

pallet weight of 750 kg

FLOW RACK JUNGHEINRICH TYPE E VERY GOOD CONDITION, DIRECTLY FROM THE PRODUCTION! 7 SEGMENTS AVAILABLE 3 LAYERS PER SEGMENT 5 PALLETS PER LOCATION A TOTAL OF 105 PALLETS DIMENSIONS PER SEGMENT: TOTAL HEIGHT 4007 MM CLEAR CHANNEL WIDTH 1400 MM HEIGHT 1300 MM PER LAYER PALLET WEIGHT OF 750 KG
Vendedor: Kopack GmbH
Año de construcción: usado
Ubicación: Land-pressure:110 t<br/>table length:1200 mm<br/>table width:1000 mm<br/>stroke max.:1150 mm<br/>dimensions:4200 x 2400 x 4800 mm<br/>draw back pressure:11 t<br/>stroke max.:1150 mm<br/>weight:16 t<br/>stroke of the table:1200 mm<br/>swivable table::45 grad<br/>table load:12 t<br/>table speed:25 mm/sec<br/>table speed:10 mm/sec<br/>power capacity:23 kw<br/>voltage:400 v<br/>control voltage:24 v dc<br/>frequency:50 hz<br/>work speed:0 - 10 mm/sec.<br/>:130 mm/sec<br/>:195 mm/sec.<br/>colour:grau 7035 ral<br/>colour:orange 2009 ral<br/>colour:dunkelgrau 7021 ral<br/>oil tank capacity:400 l<br/>recommended oil:din hlp / iso vg 46 <br/><br/> PRESSURE:110 T
TABLE LENGTH:1200 MM
TABLE WIDTH:1000 MM
STROKE MAX.:1150 MM
DIMENSIONS:4200 X 2400 X 4800 MM
DRAW BACK PRESSURE:11 T
STROKE MAX.:1150 MM
WEIGHT:16 T
STROKE OF THE TABLE:1200 MM
SWIVABLE TABLE::45 GRAD
TABLE LOAD:12 T
TABLE SPEED:25 MM/SEC
TABLE SPEED:10 MM/SEC
POWER CAPACITY:23 KW
VOLTAGE:400 V
CONTROL VOLTAGE:24 V DC
FREQUENCY:50 HZ
WORK SPEED:0 - 10 MM/SEC.
:130 MM/SEC
:195 MM/SEC.
COLOUR:GRAU 7035 RAL
COLOUR:ORANGE 2009 RAL
COLOUR:DUNKELGRAU 7021 RAL
OIL TANK CAPACITY:400 L
RECOMMENDED OIL:DIN HLP / ISO VG 46

Vendedor: Hidrobrasil
Año de construcción: usado
Ubicación: Land-flow racks jungheinrich used
mpb

data:
-h: 350 cm
-l: ca 25 yds
-stand blue
-trusses yellow
-4 channels
-suitable for euro pallets

shelf consists of:
-30 x stand
-trusses 88 x 90 cm

accessories such as z.b ground anchors, starting-up protection u.s.w can be purchased also from us.
bcccd7lia9

our recommendation:
tell us your requirements...
we assist them with the realisation of your projects, from planning to the order to the assembly.

delivery upon request by us conveniently possible. FLOW RACKS JUNGHEINRICH USED MPB DATA: -H: 350 CM -L: CA 25 YDS -STAND BLUE -TRUSSES YELLOW -4 CHANNELS -SUITABLE FOR EURO PALLETS SHELF CONSISTS OF: -30 X STAND -TRUSSES 88 X 90 CM ACCESSORIES SUCH AS Z.B GROUND ANCHORS, STARTING-UP PROTECTION U.S.W CAN BE PURCHASED ALSO FROM US. BCCCD7LIA9 OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST THEM WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO THE ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: weg motors:
hydraulics from bosch rexroth:
interior lighting:
operator panel on swivel arm:
two-hand operation on mobile stand:
usb interface for data transfer:
siemens control system:
light sensors sick:1250 mm
pusher plate hydraulic fold-down, opens up to about 175°:

description: columns and cylinders are made of tool steel sae 1045 (identical to german standard c 45) and external induction hardened and chromium-plated. the linear measuring rod communicates the position of the plunger to the controller. the traverse path, the upper breakpoint and the switch point at which the press should switch from empty journey to working speed, as well as the the end position to be used can be easily and quickly entered via the monitor control. the working speed can be in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm be set. the controller monitors the secured areas, the entire hydraulic system and the pump. the controller is located in a separate control cabinet. the actual press operation is carried out by means of a control panel attached to a swivel arm, which ways..gif" alt="Land-pressure:40 t
table length:1000 mm
table width:700 mm
weight of the machine ca.:9 t
dimensions of the machine ca.:4000 x 4400 x 1800 mm
stroke length max.:1050 mm
dayligth:1200 mm
table rotating:um 180 grad
table load:5 t
pre-running speed:100 mm/sec
return speed:100 mm/sec
work speed:von 0 bis 10 mm/sec.
main cylinder:1 stück
table extendable by:for 1050 mm
table tilting:50 grad
fold-down upper tool:180 grad
speed of table:25 mm/sec
pressure, travel and speed adjustable via monitor control:
sturdy machine body with solid welded construction, manufactured according to din 8651:
low maintenance and reliability due to robust technology:
maintenance balcony accessible via marine ladder:
openings secured via sick lightcurtains:
table moves to the front of the machine and is desired by 45 degrees.:
including installation and commissioning (10 t crane and 5 t forklifts would have to be provided):
panel to the left of the machine:
monitor control with 200 memory slots:
remote function for remote maintenance:
operating manual, technical documents, documentation in german:
ce-certificate:
monitor siemens 9\":
weg motors:
hydraulics from bosch rexroth:
interior lighting:
operator panel on swivel arm:
two-hand operation on mobile stand:
usb interface for data transfer:
siemens control system:
light sensors sick:1250 mm
pusher plate hydraulic fold-down, opens up to about 175°:

description: columns and cylinders are made of tool steel sae 1045 (identical to german standard c 45) and external induction hardened and chromium-plated. the linear measuring rod communicates the position of the plunger to the controller. the traverse path, the upper breakpoint and the switch point at which the press should switch from empty journey to working speed, as well as the the end position to be used can be easily and quickly entered via the monitor control. the working speed can be in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm be set. the controller monitors the secured areas, the entire hydraulic system and the pump. the controller is located in a separate control cabinet. the actual press operation is carried out by means of a control panel attached to a swivel arm, which ways." style="height: 18px;"> PRESSURE:40 T
TABLE LENGTH:1000 MM
TABLE WIDTH:700 MM
WEIGHT OF THE MACHINE CA.:9 T
DIMENSIONS OF THE MACHINE CA.:4000 X 4400 X 1800 MM
STROKE LENGTH MAX.:1050 MM
DAYLIGTH:1200 MM
TABLE ROTATING:UM 180 GRAD
TABLE LOAD:5 T
PRE-RUNNING SPEED:100 MM/SEC
RETURN SPEED:100 MM/SEC
WORK SPEED:VON 0 BIS 10 MM/SEC.
MAIN CYLINDER:1 STüCK
TABLE EXTENDABLE BY:FOR 1050 MM
TABLE TILTING:50 GRAD
FOLD-DOWN UPPER TOOL:180 GRAD
SPEED OF TABLE:25 MM/SEC
PRESSURE, TRAVEL AND SPEED ADJUSTABLE VIA MONITOR CONTROL:
STURDY MACHINE BODY WITH SOLID WELDED CONSTRUCTION, MANUFACTURED ACCORDING TO DIN 8651:
LOW MAINTENANCE AND RELIABILITY DUE TO ROBUST TECHNOLOGY:
MAINTENANCE BALCONY ACCESSIBLE VIA MARINE LADDER:
OPENINGS SECURED VIA SICK LIGHTCURTAINS:
TABLE MOVES TO THE FRONT OF THE MACHINE AND IS DESIRED BY 45 DEGREES.:
INCLUDING INSTALLATION AND COMMISSIONING (10 T CRANE AND 5 T FORKLIFTS WOULD HAVE TO BE PROVIDED):
PANEL TO THE LEFT OF THE MACHINE:
MONITOR CONTROL WITH 200 MEMORY SLOTS:
REMOTE FUNCTION FOR REMOTE MAINTENANCE:
OPERATING MANUAL, TECHNICAL DOCUMENTS, DOCUMENTATION IN GERMAN:
CE-CERTIFICATE:
MONITOR SIEMENS 9\":
WEG MOTORS:
HYDRAULICS FROM BOSCH REXROTH:
INTERIOR LIGHTING:
OPERATOR PANEL ON SWIVEL ARM:
TWO-HAND OPERATION ON MOBILE STAND:
USB INTERFACE FOR DATA TRANSFER:
SIEMENS CONTROL SYSTEM:
LIGHT SENSORS SICK:1250 MM
PUSHER PLATE HYDRAULIC FOLD-DOWN, OPENS UP TO ABOUT 175°:

DESCRIPTION: COLUMNS AND CYLINDERS ARE MADE OF TOOL STEEL SAE 1045 (IDENTICAL TO GERMAN STANDARD C 45) AND EXTERNAL INDUCTION HARDENED AND CHROMIUM-PLATED. THE LINEAR MEASURING ROD COMMUNICATES THE POSITION OF THE PLUNGER TO THE CONTROLLER. THE TRAVERSE PATH, THE UPPER BREAKPOINT AND THE SWITCH POINT AT WHICH THE PRESS SHOULD SWITCH FROM EMPTY JOURNEY TO WORKING SPEED, AS WELL AS THE THE END POSITION TO BE USED CAN BE EASILY AND QUICKLY ENTERED VIA THE MONITOR CONTROL. THE WORKING SPEED CAN BE IN 1 MM/SEC INCREMENTS FROM 0 TO 10 SEC AND IN 10 MM INCREMENTS FROM 10 TO 155 MM BE SET. THE CONTROLLER MONITORS THE SECURED AREAS, THE ENTIRE HYDRAULIC SYSTEM AND THE PUMP. THE CONTROLLER IS LOCATED IN A SEPARATE CONTROL CABINET. THE ACTUAL PRESS OPERATION IS CARRIED OUT BY MEANS OF A CONTROL PANEL ATTACHED TO A SWIVEL ARM, WHICH WAYS.
Vendedor: Hidrobrasil
Año de construcción: usado
Ubicación:
all cad/cam programs such as lantek, metalix and almacam are usable.

options:
linear drive technology, laser light source optionally available with 3, 4 or 6 kw
sampling device, safety light barrier, air conditioning for automation panel.

24 months warranty
the price refers to a 1.5 x 3 m facility with 2 kw.gif" alt="Land-work area: 1.5 x 3 m or 2 x 4 m
standard equipment:
self-focusing cutter 2 kw laser cooling unit, astringent and purifying air system, security, automatic twin transfer table, cad/cam software (metalix, lantek, almacam) control unit with 15 "-touch screen, conveyor belt, warning light, nozzle set

all cad/cam programs such as lantek, metalix and almacam are usable.

options:
linear drive technology, laser light source optionally available with 3, 4 or 6 kw
sampling device, safety light barrier, air conditioning for automation panel.

24 months warranty
the price refers to a 1.5 x 3 m facility with 2 kw" style="height: 18px;"> WORK AREA: 1.5 X 3 M OR 2 X 4 M
STANDARD EQUIPMENT:
SELF-FOCUSING CUTTER 2 KW LASER COOLING UNIT, ASTRINGENT AND PURIFYING AIR SYSTEM, SECURITY, AUTOMATIC TWIN TRANSFER TABLE, CAD/CAM SOFTWARE (METALIX, LANTEK, ALMACAM) CONTROL UNIT WITH 15 "-TOUCH SCREEN, CONVEYOR BELT, WARNING LIGHT, NOZZLE SET

ALL CAD/CAM PROGRAMS SUCH AS LANTEK, METALIX AND ALMACAM ARE USABLE.

OPTIONS:
LINEAR DRIVE TECHNOLOGY, LASER LIGHT SOURCE OPTIONALLY AVAILABLE WITH 3, 4 OR 6 KW
SAMPLING DEVICE, SAFETY LIGHT BARRIER, AIR CONDITIONING FOR AUTOMATION PANEL.

24 MONTHS WARRANTY
THE PRICE REFERS TO A 1.5 X 3 M FACILITY WITH 2 KW
Vendedor: CNC Servicetechnik Sperling
Año de construcción: usado
Ubicación: :
:
:
:

.gif" alt="Land-pressure:63 t
table length:700 mm
table width:1000 mm
weight of the machine ca.:ca. 9 t
dimensions of the machine ca.:4500 x 4300 x 2700 m
:1 stück
stroke length max.:1200 mm
daylight dimension : table/slide up:1200 mm
table height:700 mm
:um 1200 mm
:um 45 grad
:um 170 grad
:1250 x 1000 mm
table load:5 t
:25 mm/sec
pre-running speed:95 mm/sec
return speed:80 mm/sec
work speed:von 0 bis 10 mm/sec.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
monitor siemens 9\":
:
:
:
:

" style="height: 18px;"> PRESSURE:63 T
TABLE LENGTH:700 MM
TABLE WIDTH:1000 MM
WEIGHT OF THE MACHINE CA.:CA. 9 T
DIMENSIONS OF THE MACHINE CA.:4500 X 4300 X 2700 M
:1 STüCK
STROKE LENGTH MAX.:1200 MM
DAYLIGHT DIMENSION : TABLE/SLIDE UP:1200 MM
TABLE HEIGHT:700 MM
:UM 1200 MM
:UM 45 GRAD
:UM 170 GRAD
:1250 X 1000 MM
TABLE LOAD:5 T
:25 MM/SEC
PRE-RUNNING SPEED:95 MM/SEC
RETURN SPEED:80 MM/SEC
WORK SPEED:VON 0 BIS 10 MM/SEC.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
MONITOR SIEMENS 9\":
:
:
:
:

Vendedor: Hidrobrasil
Año de construcción: usado
Precio: 13.500 €
Ubicación: Land-storage tank 85,000 litres of v2a
cat no. 17-00177

used in very good condition

dimensions and weight:
ges. height approx.: 5200 mm diameter: 5000 mm
weight: 4100 kg material: v2a - aisi 304, 1.4301 tank top shelf:
central with dome lid diameter 500 mm
with 4 clamping screws
with fermentation sheet pile connection dn 50
with valve for overpressure dn 50

tank cylinder:
with manhole oval 420 x 320 mm
with level indicator
with tap hole cover

underbody: flat bottom with 3% slope for residual trace
with spout lock flanges with threaded connection dn 50 STORAGE TANK 85,000 LITRES OF V2A CAT NO. 17-00177 USED IN VERY GOOD CONDITION DIMENSIONS AND WEIGHT: GES. HEIGHT APPROX.: 5200 MM DIAMETER: 5000 MM WEIGHT: 4100 KG MATERIAL: V2A - AISI 304, 1.4301 TANK TOP SHELF: CENTRAL WITH DOME LID DIAMETER 500 MM WITH 4 CLAMPING SCREWS WITH FERMENTATION SHEET PILE CONNECTION DN 50 WITH VALVE FOR OVERPRESSURE DN 50 TANK CYLINDER: WITH MANHOLE OVAL 420 X 320 MM WITH LEVEL INDICATOR WITH TAP HOLE COVER UNDERBODY: FLAT BOTTOM WITH 3% SLOPE FOR RESIDUAL TRACE WITH SPOUT LOCK FLANGES WITH THREADED CONNECTION DN 50
Vendedor: Eurolux GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-pressure:500 t<br/>passage width:2100 x 1500 mm<br/>stroke:1000 mm<br/>total power requirement:62 kw<br/>weight of the machine ca.:39 t<br/>dimensions:5100 x 2800 x 4040 mm<br/>return capacity:40 t<br/>:2 stück<br/>column diameter:hauptzylinder 360 mm<br/>table dimensions:2100 x 1500 mit t-nuten mm<br/>:2100 x 1500 mm<br/>table height over floor:850 mm<br/>pre-running speed:300 mm/sec<br/>return speed:300 (bei 20t stößelgewicht) mm/sec<br/>pressure speed:200t = 28 mm/sec<br/>:ca. 1000 l<br/>:2 stück<br/>column diameter:hilfszylinder 120 mm<br/>total size table tops:ca. 2750 x 1600 mm<br/>total size of plunger plates:ca. 2750 x 1600 mm<br/>pressure speed:300t = 20 mm/sec<br/>pressure speed:500t = 6 mm/sec<br/>retract force of the plunger:40 t<br/>voltage:400 v<br/>frequency:50 hz<br/>:24 v<br/>axial piston pump (rexroth/bosch a4vso125):290 lt/min<br/>daylight opening:1500 mm<br/>hydraulic block:rexroth <br/>pressure control:über plc (mindestdruck 50t) <br/>cylinder:4 x ?90 x 70 mm<br/>stroke length max.:300 über plc einstellbar mm<br/>:95 mm/sec<br/>:240 mm/sec<br/>capacity:4 x 15t bei 250 bar t<br/>:über monitor von 50-500t t<br/>:0-900 sec<br/>: <br/>: <br/>: <br/>: <br/>uyhdraulic tank:2000 l<br/>ram secured mechanically and hydraulicly: <br/>: <br/>tough machine frame with solid welded design: <br/>reliable low-maintenance construction: <br/>manufactured by certified specialists: <br/>: <br/>t-grooves as per din 650-22: <br/>ce-certificate: <br/>construction in accordance with eu standards: <br/>: <br/>induction-hardened and chrome plated cylinder: <br/>: <br/>: <br/>hydraulic components bosch rexroth: <br/>lightcurtains by schmersal: <br/>: <br/>: <br/>: <br/>: <br/>siemens control system:s7 300 <br/>:200 programme <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>usb interface for data transfer: <br/>: <br/>:1500 auf der vorderseite mm<br/>: <br/>interior lighting via leds: <br/><br/> PRESSURE:500 T
PASSAGE WIDTH:2100 X 1500 MM
STROKE:1000 MM
TOTAL POWER REQUIREMENT:62 KW
WEIGHT OF THE MACHINE CA.:39 T
DIMENSIONS:5100 X 2800 X 4040 MM
RETURN CAPACITY:40 T
:2 STüCK
COLUMN DIAMETER:HAUPTZYLINDER 360 MM
TABLE DIMENSIONS:2100 X 1500 MIT T-NUTEN MM
:2100 X 1500 MM
TABLE HEIGHT OVER FLOOR:850 MM
PRE-RUNNING SPEED:300 MM/SEC
RETURN SPEED:300 (BEI 20T STößELGEWICHT) MM/SEC
PRESSURE SPEED:200T = 28 MM/SEC
:CA. 1000 L
:2 STüCK
COLUMN DIAMETER:HILFSZYLINDER 120 MM
TOTAL SIZE TABLE TOPS:CA. 2750 X 1600 MM
TOTAL SIZE OF PLUNGER PLATES:CA. 2750 X 1600 MM
PRESSURE SPEED:300T = 20 MM/SEC
PRESSURE SPEED:500T = 6 MM/SEC
RETRACT FORCE OF THE PLUNGER:40 T
VOLTAGE:400 V
FREQUENCY:50 HZ
:24 V
AXIAL PISTON PUMP (REXROTH/BOSCH A4VSO125):290 LT/MIN
DAYLIGHT OPENING:1500 MM
HYDRAULIC BLOCK:REXROTH
PRESSURE CONTROL:üBER PLC (MINDESTDRUCK 50T)
CYLINDER:4 X ?90 X 70 MM
STROKE LENGTH MAX.:300 üBER PLC EINSTELLBAR MM
:95 MM/SEC
:240 MM/SEC
CAPACITY:4 X 15T BEI 250 BAR T
:üBER MONITOR VON 50-500T T
:0-900 SEC
:
:
:
:
UYHDRAULIC TANK:2000 L
RAM SECURED MECHANICALLY AND HYDRAULICLY:
:
TOUGH MACHINE FRAME WITH SOLID WELDED DESIGN:
RELIABLE LOW-MAINTENANCE CONSTRUCTION:
MANUFACTURED BY CERTIFIED SPECIALISTS:
:
T-GROOVES AS PER DIN 650-22:
CE-CERTIFICATE:
CONSTRUCTION IN ACCORDANCE WITH EU STANDARDS:
:
INDUCTION-HARDENED AND CHROME PLATED CYLINDER:
:
:
HYDRAULIC COMPONENTS BOSCH REXROTH:
LIGHTCURTAINS BY SCHMERSAL:
:
:
:
:
SIEMENS CONTROL SYSTEM:S7 300
:200 PROGRAMME
:
:
:
:
:
:
USB INTERFACE FOR DATA TRANSFER:
:
:1500 AUF DER VORDERSEITE MM
:
INTERIOR LIGHTING VIA LEDS:

Vendedor: Hidrobrasil
Año de construcción: usado
Precio: 950 €
Ubicación: Land-for sale we offer 22 mm bottom shelves with tensioning plate.

depth of shelf 1200mm!

specifications of the offered set:
4 fields:
frame 3500x1200mm - 5 pieces
carrier 1500mm - 72 pcs
chuck (specialist) 1500x1200mm - 24 pcs

net price: â?¬950
large number available. immediately available.

shipping charges possible.

if you have further questions, please contact us.

FOR SALE WE OFFER 22 MM BOTTOM SHELVES WITH TENSIONING PLATE. DEPTH OF SHELF 1200MM! SPECIFICATIONS OF THE OFFERED SET: 4 FIELDS: FRAME 3500X1200MM - 5 PIECES CARRIER 1500MM - 72 PCS CHUCK (SPECIALIST) 1500X1200MM - 24 PCS NET PRICE: &ACIRC;?&NOT;950 LARGE NUMBER AVAILABLE. IMMEDIATELY AVAILABLE. SHIPPING CHARGES POSSIBLE. IF YOU HAVE FURTHER QUESTIONS, PLEASE CONTACT US.
Vendedor: Regalux Krzysztof Sutowski
Año de construcción: usado
Ubicación: Land-pressure:150 t<br/>passage width: mm<br/>stroke:500 mm<br/>weight of machine approx.:ca. 8,5 t<br/>dimensions:1200x1800x3100 mm<br/>engine output:10 kw<br/>max working height:1000 mm<br/>approaching speed max. :9,9 mm/sec<br/>pressure speed:100t = 9,9 bis 0 mm/sec<br/>table height above ground level (approx.):1000 mm<br/>pressure control: <br/>: <br/>:schmiernippel <br/>column diameter:230 verchromt mm<br/>return speed:25 mm/sec<br/>hydraulic block: <br/>: <br/>:500 l<br/>demand for oil:ca 400 l<br/>ram is secured mechanical and hydraulic: <br/>ce-certificate: <br/>construction in accordance with eu standards: <br/>operating manual, technical documents, documentation in german: <br/>siemens control system: <br/>hydraulic components bosch rexroth: <br/>: <br/>: <br/>maintenance balcony:5800 ?<br/>:3900 ?<br/>:2800 ?<br/>:4800 ?<br/>:29000 ?<br/>:8200 ?<br/><br/>faster version with approach and working speed at 60mm/sec ist available on request. price (excl. options): 117.500,-- PRESSURE:150 T
PASSAGE WIDTH: MM
STROKE:500 MM
WEIGHT OF MACHINE APPROX.:CA. 8,5 T
DIMENSIONS:1200X1800X3100 MM
ENGINE OUTPUT:10 KW
MAX WORKING HEIGHT:1000 MM
APPROACHING SPEED MAX. :9,9 MM/SEC
PRESSURE SPEED:100T = 9,9 BIS 0 MM/SEC
TABLE HEIGHT ABOVE GROUND LEVEL (APPROX.):1000 MM
PRESSURE CONTROL:
:
:SCHMIERNIPPEL
COLUMN DIAMETER:230 VERCHROMT MM
RETURN SPEED:25 MM/SEC
HYDRAULIC BLOCK:
:
:500 L
DEMAND FOR OIL:CA 400 L
RAM IS SECURED MECHANICAL AND HYDRAULIC:
CE-CERTIFICATE:
CONSTRUCTION IN ACCORDANCE WITH EU STANDARDS:
OPERATING MANUAL, TECHNICAL DOCUMENTS, DOCUMENTATION IN GERMAN:
SIEMENS CONTROL SYSTEM:
HYDRAULIC COMPONENTS BOSCH REXROTH:
:
:
MAINTENANCE BALCONY:5800 ?
:3900 ?
:2800 ?
:4800 ?
:29000 ?
:8200 ?

FASTER VERSION WITH APPROACH AND WORKING SPEED AT 60MM/SEC IST AVAILABLE ON REQUEST. PRICE (EXCL. OPTIONS): 117.500,--
Vendedor: Hidrobrasil
Año de construcción: usado
Ubicación: Land-stainless steel transport containers 㢠content 1,600 ltr.,.
easily stackable, forklift trucks and pallet trucks passable

last purpose: food
dimensions: lxwxh 1,200 x 1,200 mm x 1,980 mm

equipment: top 400 mm with bayonet in stainless steel, vacuum valve cover,.
                          drain slices 400 mm in stainless steel with hand gear
year of construction: 2005/2006
 STAINLESS STEEL TRANSPORT CONTAINERS &ATILDE;&CENT; CONTENT 1,600 LTR.,. EASILY STACKABLE, FORKLIFT TRUCKS AND PALLET TRUCKS PASSABLE LAST PURPOSE: FOOD DIMENSIONS: LXWXH 1,200 X 1,200 MM X 1,980 MM EQUIPMENT: TOP 400 MM WITH BAYONET IN STAINLESS STEEL, VACUUM VALVE COVER,. DRAIN SLICES 400 MM IN STAINLESS STEEL WITH HAND GEAR YEAR OF CONSTRUCTION: 2005/2006
Vendedor: Hochholzer Handelsagentur e.K.
Año de construcción: usado
Ubicación: technical element siemens / moeller:
:
:
:
:
usb interface for data transfer:
:
:
:
:

.gif" alt="Land-pressure:200 t
distance between columns:1200x1000 mm
stroke:600 mm
total power requirement:32,5 kw
weight of the machine ca.:20,5 t
dimensions of the machine ca.:4000x2600x5000 m
draw back pressure:20 t
master cylinder:1 stück
voltage:400 v
frequency:50 hz
:24 v
:bosch/rexroth
dayligth:800 mm
:1200x1000 mit t-nuten nach kundenwunsch din 650-22 mm
work height max.:1100 mm
pre-running speed:170 mm/sec
return speed:150 mm/sec
speed printing phase:15 mm/sek.
hydraulic block:rexroth
demand for oil:500 l
pressure control:über plc (mindestdruck 20t)
oil cooling:elektrisch
:220 (im schaltschrank) v
memory:200 programme
:über monitor von 20-200 t
controll:zweihandbedienung beweglich
:2-10 mm/sec
:0-10 sec
:
slide protection mechanical and hydraulic:
:
:
:
monitor siemens 10\":
technical element siemens / moeller:
:
:
:
:
usb interface for data transfer:
:
:
:
:

" style="height: 18px;"> PRESSURE:200 T
DISTANCE BETWEEN COLUMNS:1200X1000 MM
STROKE:600 MM
TOTAL POWER REQUIREMENT:32,5 KW
WEIGHT OF THE MACHINE CA.:20,5 T
DIMENSIONS OF THE MACHINE CA.:4000X2600X5000 M
DRAW BACK PRESSURE:20 T
MASTER CYLINDER:1 STüCK
VOLTAGE:400 V
FREQUENCY:50 HZ
:24 V
:BOSCH/REXROTH
DAYLIGTH:800 MM
:1200X1000 MIT T-NUTEN NACH KUNDENWUNSCH DIN 650-22 MM
WORK HEIGHT MAX.:1100 MM
PRE-RUNNING SPEED:170 MM/SEC
RETURN SPEED:150 MM/SEC
SPEED PRINTING PHASE:15 MM/SEK.
HYDRAULIC BLOCK:REXROTH
DEMAND FOR OIL:500 L
PRESSURE CONTROL:üBER PLC (MINDESTDRUCK 20T)
OIL COOLING:ELEKTRISCH
:220 (IM SCHALTSCHRANK) V
MEMORY:200 PROGRAMME
:üBER MONITOR VON 20-200 T
CONTROLL:ZWEIHANDBEDIENUNG BEWEGLICH
:2-10 MM/SEC
:0-10 SEC
:
SLIDE PROTECTION MECHANICAL AND HYDRAULIC:
:
:
:
MONITOR SIEMENS 10\":
TECHNICAL ELEMENT SIEMENS / MOELLER:
:
:
:
:
USB INTERFACE FOR DATA TRANSFER:
:
:
:
:

Vendedor: Hidrobrasil
Año de construcción: usado
Precio: 6.450 €
Ubicación: Land-water softener salt container and control

capacity 2200 l WATER SOFTENER SALT CONTAINER AND CONTROL CAPACITY 2200 L
Vendedor: Eltec-Müller GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-pressure:56 t<br/>table length:1000 mm<br/>table width:700 mm<br/>daylight opening:1200 mm<br/>no. of cylinders:1 st.<br/>stroke length max.:1200 mm<br/>table height over floor:700 mm<br/>table extendable:1200 mm<br/>speed of table:25 mm/sec<br/>table tilting:45 grad<br/>table load:5 t<br/>fold-down upper tool:170 grad<br/>:1250 x 1000 mm<br/>:95 mm/sec<br/>speed of return flow:80 mm/sec<br/>working feed:0 - 10 mm/sec<br/>dimensions:4300 x 2700 x 4500 mm<br/>total weight:8,5 t<br/>siemens control system: <br/>monitor siemens:9 zoll<br/>motors von weg: <br/>hydraulic components bosch rexroth: <br/>:1200 mm<br/><br/> PRESSURE:56 T
TABLE LENGTH:1000 MM
TABLE WIDTH:700 MM
DAYLIGHT OPENING:1200 MM
NO. OF CYLINDERS:1 ST.
STROKE LENGTH MAX.:1200 MM
TABLE HEIGHT OVER FLOOR:700 MM
TABLE EXTENDABLE:1200 MM
SPEED OF TABLE:25 MM/SEC
TABLE TILTING:45 GRAD
TABLE LOAD:5 T
FOLD-DOWN UPPER TOOL:170 GRAD
:1250 X 1000 MM
:95 MM/SEC
SPEED OF RETURN FLOW:80 MM/SEC
WORKING FEED:0 - 10 MM/SEC
DIMENSIONS:4300 X 2700 X 4500 MM
TOTAL WEIGHT:8,5 T
SIEMENS CONTROL SYSTEM:
MONITOR SIEMENS:9 ZOLL
MOTORS VON WEG:
HYDRAULIC COMPONENTS BOSCH REXROTH:
:1200 MM

Vendedor: Hidrobrasil
Año de construcción: usado
Precio: 950 €
Ubicación: Land-double-walled kunstofftank

2,5 m3 DOUBLE-WALLED KUNSTOFFTANK 2,5 M3
Vendedor: Eltec-Müller GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-pressure:160   t<br/>passage width: mm<br/>stroke:600 mm<br/>total power requirement:7,5 kw<br/>weight of the machine ca.:7 t<br/>draw back pressure:16 t<br/>:1 stück<br/>column-diameter:160 mm<br/>dayligth:800 mm<br/>table surface area:1200 x 800 mm<br/>:400 mm<br/>table height:850 mm<br/>table load:5 t<br/>pre-running speed:1 bis 9,8 mm/sec<br/>return speed:1 bis 9,8 mm/sec<br/>quantity of oil:220 l<br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/><br/> PRESSURE:160 T
PASSAGE WIDTH: MM
STROKE:600 MM
TOTAL POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:7 T
DRAW BACK PRESSURE:16 T
:1 STüCK
COLUMN-DIAMETER:160 MM
DAYLIGTH:800 MM
TABLE SURFACE AREA:1200 X 800 MM
:400 MM
TABLE HEIGHT:850 MM
TABLE LOAD:5 T
PRE-RUNNING SPEED:1 BIS 9,8 MM/SEC
RETURN SPEED:1 BIS 9,8 MM/SEC
QUANTITY OF OIL:220 L
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:

Vendedor: Hidrobrasil
Año de construcción: usado
Precio: 550 €
Ubicación: Land-4 piece double walled kunstofftanks.
1.5 m2 unit price 550,-&amp;euro; 4 PIECE DOUBLE WALLED KUNSTOFFTANKS. 1.5 M2 UNIT PRICE 550,-&AMP;EURO;
Vendedor: Eltec-Müller GmbH & Co. KG
Año de construcción: usado
Ubicación: :
:

.gif" alt="Land-pressure:40 t
table length:1000 mm
table width:700 mm
weight of the machine ca.:9 t
dimensions of the machine ca.:4000 x 4400 x 1800 mm
:1 stück
stroke length max.:1050 mm
dayligth:1200 mm
:um 1050 mm
:um 50 grad
:um 180 grad
table rotating:um 180 grad
table load:5 t
:25 mm/sec
pre-running speed:100 mm/sec
return speed:100 mm/sec
work speed:von 0 bis 10 mm/sec.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
monitor siemens 9\":
:
:

" style="height: 18px;"> PRESSURE:40 T
TABLE LENGTH:1000 MM
TABLE WIDTH:700 MM
WEIGHT OF THE MACHINE CA.:9 T
DIMENSIONS OF THE MACHINE CA.:4000 X 4400 X 1800 MM
:1 STüCK
STROKE LENGTH MAX.:1050 MM
DAYLIGTH:1200 MM
:UM 1050 MM
:UM 50 GRAD
:UM 180 GRAD
TABLE ROTATING:UM 180 GRAD
TABLE LOAD:5 T
:25 MM/SEC
PRE-RUNNING SPEED:100 MM/SEC
RETURN SPEED:100 MM/SEC
WORK SPEED:VON 0 BIS 10 MM/SEC.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
MONITOR SIEMENS 9\":
:
:

Vendedor: Hidrobrasil
Año de construcción: usado
Precio: 650 €
Ubicación: Land-double-walled plastic flat bottom tank, 1.5 mâ³ DOUBLE-WALLED PLASTIC FLAT BOTTOM TANK, 1.5 M&ACIRC;&SUP3;
Vendedor: Eltec-Müller GmbH & Co. KG
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 2514 x 1183 x 2093 mm<br/>description: machine number 020-26 0- 2hf 4535. with num cnc control, type 720, dialogue language presumably french, ibag frequency converter, table size 480 x 220 mm, 2 spindles, distance 90 mm, travel range approx. 400 x 150 x 300 mm, machine lamp, programming manual in french. WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 2514 X 1183 X 2093 MM
DESCRIPTION: MACHINE NUMBER 020-26 0- 2HF 4535. WITH NUM CNC CONTROL, TYPE 720, DIALOGUE LANGUAGE PRESUMABLY FRENCH, IBAG FREQUENCY CONVERTER, TABLE SIZE 480 X 220 MM, 2 SPINDLES, DISTANCE 90 MM, TRAVEL RANGE APPROX. 400 X 150 X 300 MM, MACHINE LAMP, PROGRAMMING MANUAL IN FRENCH.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1 x ltr tank battery 89.700. cubic becker used tanks, bj. 2003-2004, stackable (lower tanks with high feet,), top with short feet comprising:
-2 x 6,200 ltr. va2 storage tank, becker, used, cubic, complete with all fittings, tanks no.: 41 (b: 1.46 t: 1.90 h: 2.85 m) + tank 42 (b: 1,50 t: 1.90 h: 2.70 m) price/hour: 3.900,-
-2 x 6,300 ltr. va2 storage tank, becker, used, cubic, complete with all fittings, tanks no.: 43 (b: 1.60 t: 1.90 h: 2,40 m) + tank 44 (b: 1.60 t: 1.90 h: 2,40 m) price/hour: 3.950,-
-2 x 7,750 ltr. va2 storage tank, becker, used, cubic, complete with all fittings, tanks no.: 39 (b: 1,25 t: 2.95 h: 2.90 m) + tank 40 (b 1.24 t: 2.95 h: 2.75 m) price/st: 4.750,-
-6 x 8,200 ltr. va2 storage tank, becker, used, cubic, complete with all fittings, tanks no.: 33 + 35 + 37 (b: 1,25 t: 2.95 h: 2.90 m) + 34 + 36 tank (no. 38 sold) (b: 1.24 t: 2.95 h: 2.75 m), price/st.: 4.900,-

tank standing on tank no. 33 no 34 / tank standing on tank no. 35 no. 36 / tank standing on tank no. 37 no. 38 / tank on tank no. 39 was no. 40 / tank standing on tank no. 41 no. 42 / tank was no. 44 on tank no. 43

prices plus 19% vat from stock dolgesheim
 1 X LTR TANK BATTERY 89.700. CUBIC BECKER USED TANKS, BJ. 2003-2004, STACKABLE (LOWER TANKS WITH HIGH FEET,), TOP WITH SHORT FEET COMPRISING: -2 X 6,200 LTR. VA2 STORAGE TANK, BECKER, USED, CUBIC, COMPLETE WITH ALL FITTINGS, TANKS NO.: 41 (B: 1.46 T: 1.90 H: 2.85 M) + TANK 42 (B: 1,50 T: 1.90 H: 2.70 M) PRICE/HOUR: 3.900,- -2 X 6,300 LTR. VA2 STORAGE TANK, BECKER, USED, CUBIC, COMPLETE WITH ALL FITTINGS, TANKS NO.: 43 (B: 1.60 T: 1.90 H: 2,40 M) + TANK 44 (B: 1.60 T: 1.90 H: 2,40 M) PRICE/HOUR: 3.950,- -2 X 7,750 LTR. VA2 STORAGE TANK, BECKER, USED, CUBIC, COMPLETE WITH ALL FITTINGS, TANKS NO.: 39 (B: 1,25 T: 2.95 H: 2.90 M) + TANK 40 (B 1.24 T: 2.95 H: 2.75 M) PRICE/ST: 4.750,- -6 X 8,200 LTR. VA2 STORAGE TANK, BECKER, USED, CUBIC, COMPLETE WITH ALL FITTINGS, TANKS NO.: 33 + 35 + 37 (B: 1,25 T: 2.95 H: 2.90 M) + 34 + 36 TANK (NO. 38 SOLD) (B: 1.24 T: 2.95 H: 2.75 M), PRICE/ST.: 4.900,- TANK STANDING ON TANK NO. 33 NO 34 / TANK STANDING ON TANK NO. 35 NO. 36 / TANK STANDING ON TANK NO. 37 NO. 38 / TANK ON TANK NO. 39 WAS NO. 40 / TANK STANDING ON TANK NO. 41 NO. 42 / TANK WAS NO. 44 ON TANK NO. 43 PRICES PLUS 19% VAT FROM STOCK DOLGESHEIM
Vendedor: VINO TEC e.K.
Año de construcción: usado
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 2514 x 1183 x 2093 mm<br/>description: serial number 007 1-60/1 he-45. almac da 700 pc facetting machining center in 7-axis design. description of the axes: x = longitudinal movement of the tool 240 mm, y = transverse movement of the tool 70 mm, z = vertical movement of the tool 30 mm, c = movement between - 60 ° and + 60 ° of the workpiece (lower divider), u = longitudinal movement of the workpiece, v = transverse movement of the workpiece, a = movement between - 180 ° and + 180 ° of the workpiece (upper divider), 2 spindles 1 x Ø 60 iso25, 1 x hf Ø 45, power supply: 3 x 400 v, frequency 50/60 hz, power 5 kva, compressed air supply 7 bar (90 psi), consumption 400 liters / hour. machine is equipped with pc programming control, separate oil tank, container 800 x 400 x 400 mm, ibag coolant tank 100 liter capacity, cooling unit, dimensions 600 x 500 x 400 mm, documentation in french. WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 2514 X 1183 X 2093 MM
DESCRIPTION: SERIAL NUMBER 007 1-60/1 HE-45. ALMAC DA 700 PC FACETTING MACHINING CENTER IN 7-AXIS DESIGN. DESCRIPTION OF THE AXES: X = LONGITUDINAL MOVEMENT OF THE TOOL 240 MM, Y = TRANSVERSE MOVEMENT OF THE TOOL 70 MM, Z = VERTICAL MOVEMENT OF THE TOOL 30 MM, C = MOVEMENT BETWEEN - 60 ° AND + 60 ° OF THE WORKPIECE (LOWER DIVIDER), U = LONGITUDINAL MOVEMENT OF THE WORKPIECE, V = TRANSVERSE MOVEMENT OF THE WORKPIECE, A = MOVEMENT BETWEEN - 180 ° AND + 180 ° OF THE WORKPIECE (UPPER DIVIDER), 2 SPINDLES 1 X Ø 60 ISO25, 1 X HF Ø 45, POWER SUPPLY: 3 X 400 V, FREQUENCY 50/60 HZ, POWER 5 KVA, COMPRESSED AIR SUPPLY 7 BAR (90 PSI), CONSUMPTION 400 LITERS / HOUR. MACHINE IS EQUIPPED WITH PC PROGRAMMING CONTROL, SEPARATE OIL TANK, CONTAINER 800 X 400 X 400 MM, IBAG COOLANT TANK 100 LITER CAPACITY, COOLING UNIT, DIMENSIONS 600 X 500 X 400 MM, DOCUMENTATION IN FRENCH.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 32.900 €
Ubicación: Land-unused special machine for the production, filling and sealing of small bags (hffs)

this machine is ideal for small, rather flat parts of products - the feed of the machine can be supplied either fully automatic or very gently manually.

especially pharmaceutical, medical products, jewelry, small gold or other precious metal bars but also all sorts of other industrial or consumer products can hereby be packed. - an integrated markem thermal transfer printer can be printing data, ean codes, logos, etc. on the film during the packaging process.

the output frequency of the engine is about 30 cycles/min when idling or with empty bags (depending on the film). - actual yield depends on product and film. - the possible bag sizes are at 110x60mm and 85x35mm. - the machine is made ​​of high quality stainless steel ss304, has a plc control and festo pneumatic parts.

in fully automatic mode, the supply of products is simply to be placed in a hopper which feeds the machine automatically - if necessary to deal especially gentle with the products, further manual input can be used, through which the products are scratch-resistant and non-contact inserted piece by piece.

the machine has never been used in a production. UNUSED SPECIAL MACHINE FOR THE PRODUCTION, FILLING AND SEALING OF SMALL BAGS (HFFS) THIS MACHINE IS IDEAL FOR SMALL, RATHER FLAT PARTS OF PRODUCTS - THE FEED OF THE MACHINE CAN BE SUPPLIED EITHER FULLY AUTOMATIC OR VERY GENTLY MANUALLY. ESPECIALLY PHARMACEUTICAL, MEDICAL PRODUCTS, JEWELRY, SMALL GOLD OR OTHER PRECIOUS METAL BARS BUT ALSO ALL SORTS OF OTHER INDUSTRIAL OR CONSUMER PRODUCTS CAN HEREBY BE PACKED. - AN INTEGRATED MARKEM THERMAL TRANSFER PRINTER CAN BE PRINTING DATA, EAN CODES, LOGOS, ETC. ON THE FILM DURING THE PACKAGING PROCESS. THE OUTPUT FREQUENCY OF THE ENGINE IS ABOUT 30 CYCLES/MIN WHEN IDLING OR WITH EMPTY BAGS (DEPENDING ON THE FILM). - ACTUAL YIELD DEPENDS ON PRODUCT AND FILM. - THE POSSIBLE BAG SIZES ARE AT 110X60MM AND 85X35MM. - THE MACHINE IS MADE ​​OF HIGH QUALITY STAINLESS STEEL SS304, HAS A PLC CONTROL AND FESTO PNEUMATIC PARTS. IN FULLY AUTOMATIC MODE, THE SUPPLY OF PRODUCTS IS SIMPLY TO BE PLACED IN A HOPPER WHICH FEEDS THE MACHINE AUTOMATICALLY - IF NECESSARY TO DEAL ESPECIALLY GENTLE WITH THE PRODUCTS, FURTHER MANUAL INPUT CAN BE USED, THROUGH WHICH THE PRODUCTS ARE SCRATCH-RESISTANT AND NON-CONTACT INSERTED PIECE BY PIECE. THE MACHINE HAS NEVER BEEN USED IN A PRODUCTION.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 3000 x 1600 x 2200 mm<br/>description: serial number 006-445 hf. spindle distance 70 mm each, table size 390 x 120 mm, workpiece clamping device for 4 workpieces (see photos), projection 1. spindle 120 mm, 2nd spindle 190 mm. the machine is equipped with num cnc control, type 1020, 4 ibag spindles, electronic handwheel, oil cooling with separate container, container size 800 x 400 x 400 mm, ibag cooling system separately, type 35 kwl 10, dimensions cooling container 550 x 550 x 1300 mm , WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 1600 X 2200 MM
DESCRIPTION: SERIAL NUMBER 006-445 HF. SPINDLE DISTANCE 70 MM EACH, TABLE SIZE 390 X 120 MM, WORKPIECE CLAMPING DEVICE FOR 4 WORKPIECES (SEE PHOTOS), PROJECTION 1. SPINDLE 120 MM, 2ND SPINDLE 190 MM. THE MACHINE IS EQUIPPED WITH NUM CNC CONTROL, TYPE 1020, 4 IBAG SPINDLES, ELECTRONIC HANDWHEEL, OIL COOLING WITH SEPARATE CONTAINER, CONTAINER SIZE 800 X 400 X 400 MM, IBAG COOLING SYSTEM SEPARATELY, TYPE 35 KWL 10, DIMENSIONS COOLING CONTAINER 550 X 550 X 1300 MM ,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land- stephan universalmachine
 manufacturer: stephan gmbh, germany
 area of use: mixing, emulsifying, cutting, breaking, dispersing etc.
 type: um40 
 bowl volume: 44 litres
 max. capacity : 400 kg/h, regulated by product
 bowl material: stainless steel, tiltable 
 main motor: 380 v, 50 hz; 4,0/5,5 kw; 1.500/3.000 rpm
 cutting system with 2 knives
 techn. state: used, reconditioned with guaranty
    STEPHAN UNIVERSALMACHINE MANUFACTURER: STEPHAN GMBH, GERMANY AREA OF USE: MIXING, EMULSIFYING, CUTTING, BREAKING, DISPERSING ETC. TYPE: UM40 BOWL VOLUME: 44 LITRES MAX. CAPACITY : 400 KG/H, REGULATED BY PRODUCT BOWL MATERIAL: STAINLESS STEEL, TILTABLE MAIN MOTOR: 380 V, 50 HZ; 4,0/5,5 KW; 1.500/3.000 RPM CUTTING SYSTEM WITH 2 KNIVES TECHN. STATE: USED, RECONDITIONED WITH GUARANTY
Vendedor: MLT GmbH Dresden
Año de construcción: usado
Ubicación: Land-<br>drilling capacity (mm) <br>throat (mm) <br>spindle taper (mk) <br>
DRILLING CAPACITY (MM)
THROAT (MM)
SPINDLE TAPER (MK)
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-<br>table length (mm) 350<br>table width (mm) 140<br>longitudinal travel (x-axis) (mm) 220<br>transversal travel (y-axis) (mm)  120<br>vertical travel (z-axis) (mm) 170<br>pos atc 20<br>number apc <br>
TABLE LENGTH (MM) 350
TABLE WIDTH (MM) 140
LONGITUDINAL TRAVEL (X-AXIS) (MM) 220
TRANSVERSAL TRAVEL (Y-AXIS) (MM) 120
VERTICAL TRAVEL (Z-AXIS) (MM) 170
POS ATC 20
NUMBER APC
Vendedor: Muller Machines SA
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ALMAC types: