55 ofertas

Año de construcción: usado
Ubicación: Land-qty. 1 second-hand coil optimisation system
mfc.:	sundwig		built:	1977		operation speed:	300 m/min.
strip width:	500 - 1600 mm		thickness:	0.35 – 2.99 mm
coil od:	800 - 2200 mm	coil id: 508/610 mm	coil weight:	max. 35 t
edging width:	620 – 1585 mm		
scope of supply:	de-coiler	strip thickness measurement		strip guide table    feeding roll stand	6-rolls straightener	strip guide table	inspection stand   strip calming rolls	side strip control  driver2		flying shear	 sheet stack unit 	strip guide table	drive 3		pre-lap welding machine
inspection coil		strip edge guiding	edging shear	transportation belt
driver 5	oiling machine	crop shear		driver 6	coiler
 QTY. 1 SECOND-HAND COIL OPTIMISATION SYSTEM MFC.: SUNDWIG BUILT: 1977 OPERATION SPEED: 300 M/MIN. STRIP WIDTH: 500 - 1600 MM THICKNESS: 0.35 – 2.99 MM COIL OD: 800 - 2200 MM COIL ID: 508/610 MM COIL WEIGHT: MAX. 35 T EDGING WIDTH: 620 – 1585 MM SCOPE OF SUPPLY: DE-COILER STRIP THICKNESS MEASUREMENT STRIP GUIDE TABLE FEEDING ROLL STAND 6-ROLLS STRAIGHTENER STRIP GUIDE TABLE INSPECTION STAND STRIP CALMING ROLLS SIDE STRIP CONTROL DRIVER2 FLYING SHEAR SHEET STACK UNIT STRIP GUIDE TABLE DRIVE 3 PRE-LAP WELDING MACHINE INSPECTION COIL STRIP EDGE GUIDING EDGING SHEAR TRANSPORTATION BELT DRIVER 5 OILING MACHINE CROP SHEAR DRIVER 6 COILER
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-max. 30 kg flour, 2 speeds,  timer\r\nstainless steel bowls + spiral, safety device MAX. 30 KG FLOUR, 2 SPEEDS, TIMER\R\NSTAINLESS STEEL BOWLS + SPIRAL, SAFETY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	 

	-sanding belt dimensions 2000 x 100 mm
	-surface grinding opening 400 x 100 mm
	support vice - adjustable angle 90 â°-30 â°
	-support fine delivery by hand lever
	-abrasive belt speed 30 m / sec.
	-contact plate / grinding role for approx. ã? 42 mm - drive 3 kw, 400 v / 2880 rpm
	-space requirement approx.	    b 700 x h approx. 1200 x 1200 mm
	-weight approx.					  225 kg
	-contact rolls 33.7, 42, 50, 60, mm
 TECHNICAL DATA: -SANDING BELT DIMENSIONS 2000 X 100 MM -SURFACE GRINDING OPENING 400 X 100 MM SUPPORT VICE - ADJUSTABLE ANGLE 90 °-30 ° -SUPPORT FINE DELIVERY BY HAND LEVER -ABRASIVE BELT SPEED 30 M / SEC. -CONTACT PLATE / GRINDING ROLE FOR APPROX. � 42 MM - DRIVE 3 KW, 400 V / 2880 RPM -SPACE REQUIREMENT APPROX. B 700 X H APPROX. 1200 X 1200 MM -WEIGHT APPROX. 225 KG -CONTACT ROLLS 33.7, 42, 50, 60, MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-max. 240 kg dough, 2 speeds, 2 timer\r\nsavety device, 1 moveable bowl\r\n\r\ncategory: bakery machine\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new MAX. 240 KG DOUGH, 2 SPEEDS, 2 TIMER\R\NSAVETY DEVICE, 1 MOVEABLE BOWL\R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 3.780 €
Ubicación: Land-motor tube notchers from almi al1â??2u
notching of gas -, steam -, stainless steel, non-ferrous, as well as numerous other pipes with heavy use, almi has developed a series of particularly efficient pipe notchers with electric drive.

wherever ensure the notcher almi extremely quickly and accurately for the correct tube recess where welded tubes at a 90 â° angle. they are suitable also for the production of double corner joints.

the pipe notchers with a 2.2 kw motor is equipped for intensive use. the engine forms a whole with special eccentric shaft, which drives the notching tool.

the model al1-2u also has a notcher for zinc spout.

the tube notcher has a 0 voltage fuse, and a protection device.

properties

high productivity
    low investment costs
    several diameter available immediately
    ideal for double corner joints
    up to 5 mm wall thickness (for va up to 4 mm)

MOTOR TUBE NOTCHERS FROM ALMI AL1�?2U NOTCHING OF GAS -, STEAM -, STAINLESS STEEL, NON-FERROUS, AS WELL AS NUMEROUS OTHER PIPES WITH HEAVY USE, ALMI HAS DEVELOPED A SERIES OF PARTICULARLY EFFICIENT PIPE NOTCHERS WITH ELECTRIC DRIVE. WHEREVER ENSURE THE NOTCHER ALMI EXTREMELY QUICKLY AND ACCURATELY FOR THE CORRECT TUBE RECESS WHERE WELDED TUBES AT A 90 ° ANGLE. THEY ARE SUITABLE ALSO FOR THE PRODUCTION OF DOUBLE CORNER JOINTS. THE PIPE NOTCHERS WITH A 2.2 KW MOTOR IS EQUIPPED FOR INTENSIVE USE. THE ENGINE FORMS A WHOLE WITH SPECIAL ECCENTRIC SHAFT, WHICH DRIVES THE NOTCHING TOOL. THE MODEL AL1-2U ALSO HAS A NOTCHER FOR ZINC SPOUT. THE TUBE NOTCHER HAS A 0 VOLTAGE FUSE, AND A PROTECTION DEVICE. PROPERTIES HIGH PRODUCTIVITY LOW INVESTMENT COSTS SEVERAL DIAMETER AVAILABLE IMMEDIATELY IDEAL FOR DOUBLE CORNER JOINTS UP TO 5 MM WALL THICKNESS (FOR VA UP TO 4 MM)
Vendedor: Oeben Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-max. 50 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl + spiral, safety device\r\n MAX. 50 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL + SPIRAL, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-tetra pak® a3 flex 250ml & 500ml prisma line for sale
item #:	usm-0086
category:	tetra pak a3 cf/flex
status:	ready for shipment
tetra pak® a3 flex 250ml & 500ml prisma line including uht plant for sale:

tetra pak a3/flex tpa 250 prisma sq & 500ml prisma sq, year of manufacturing 2007, working hours only 3200
achx-10/36m (accumulator helix 10), year of manufacturing 2007, working hours only 3200
tetra cap applicator 45, year of manufacturing 2007, working hours only 900,
tetra cardboard parker 70,ear of manufacturing 2007, working hours only 2000,
tetra tray shrink 51, year of manufacturing 2007, 
ta flex 10 the (tetra therm aseptic flex), year of manufacturing 2007
tetra alcip 10, year of manufacturing 2007
flexdox fdu 2000 aseptic, year of manufacturing 2007
fcp 101, 3 tank blending plant, year of manufacturing 2007
tetra almix, year of manufacturing 2007
condition: complet plant has less than 3000 working hours. the condition is like new TETRA PAK® A3 FLEX 250ML & 500ML PRISMA LINE FOR SALE ITEM #: USM-0086 CATEGORY: TETRA PAK A3 CF/FLEX STATUS: READY FOR SHIPMENT TETRA PAK® A3 FLEX 250ML & 500ML PRISMA LINE INCLUDING UHT PLANT FOR SALE: TETRA PAK A3/FLEX TPA 250 PRISMA SQ & 500ML PRISMA SQ, YEAR OF MANUFACTURING 2007, WORKING HOURS ONLY 3200 ACHX-10/36M (ACCUMULATOR HELIX 10), YEAR OF MANUFACTURING 2007, WORKING HOURS ONLY 3200 TETRA CAP APPLICATOR 45, YEAR OF MANUFACTURING 2007, WORKING HOURS ONLY 900, TETRA CARDBOARD PARKER 70,EAR OF MANUFACTURING 2007, WORKING HOURS ONLY 2000, TETRA TRAY SHRINK 51, YEAR OF MANUFACTURING 2007, TA FLEX 10 THE (TETRA THERM ASEPTIC FLEX), YEAR OF MANUFACTURING 2007 TETRA ALCIP 10, YEAR OF MANUFACTURING 2007 FLEXDOX FDU 2000 ASEPTIC, YEAR OF MANUFACTURING 2007 FCP 101, 3 TANK BLENDING PLANT, YEAR OF MANUFACTURING 2007 TETRA ALMIX, YEAR OF MANUFACTURING 2007 CONDITION: COMPLET PLANT HAS LESS THAN 3000 WORKING HOURS. THE CONDITION IS LIKE NEW
Vendedor: Used Sweden Machines
Año de construcción: usado
Ubicación: Land-max. 160 kg dough, 2 speeds, 2 timers\r\n2 moveablel stainless steel bowls,\r\nhydraulik bowl fixing, savety device MAX. 160 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\N2 MOVEABLEL STAINLESS STEEL BOWLS,\R\NHYDRAULIK BOWL FIXING, SAVETY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-- spiralmixer with 2 bowls
- for 100 kg flour or 160 kg dough
- flour-cover with safty ring
- head goes automatic heigh 
- hand lock for bowl-trolley 
- bolwl & spiral in stainlees steel and polished
- electric is complete new with cables, switches, and buttons.
- new painted in original diosna ral color
- reconditioned: new bearings, new belts, new clutch, etc.
- additional performance from bak-tec including:
you receive our machine already dguv v3-tested
(electro-check for professional association, former bgv a3-examination)
the machine gets a current inspection sticker, valid for 1 year!

test run with dough and delivery with commissioning on request
 - SPIRALMIXER WITH 2 BOWLS - FOR 100 KG FLOUR OR 160 KG DOUGH - FLOUR-COVER WITH SAFTY RING - HEAD GOES AUTOMATIC HEIGH - HAND LOCK FOR BOWL-TROLLEY - BOLWL & SPIRAL IN STAINLEES STEEL AND POLISHED - ELECTRIC IS COMPLETE NEW WITH CABLES, SWITCHES, AND BUTTONS. - NEW PAINTED IN ORIGINAL DIOSNA RAL COLOR - RECONDITIONED: NEW BEARINGS, NEW BELTS, NEW CLUTCH, ETC. - ADDITIONAL PERFORMANCE FROM BAK-TEC INCLUDING: YOU RECEIVE OUR MACHINE ALREADY DGUV V3-TESTED (ELECTRO-CHECK FOR PROFESSIONAL ASSOCIATION, FORMER BGV A3-EXAMINATION) THE MACHINE GETS A CURRENT INSPECTION STICKER, VALID FOR 1 YEAR! TEST RUN WITH DOUGH AND DELIVERY WITH COMMISSIONING ON REQUEST
Vendedor: bak-tec-Industries GmbH
Año de construcción: usado
Ubicación: Land-max. 240 kg dough, 2 speeds, 2 timers\r\nmoveable bowl, 2 bowl stainless steel\r\n MAX. 240 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\NMOVEABLE BOWL, 2 BOWL STAINLESS STEEL\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-make: alphacnc
model: benchtop wood routing cnc machine series bt-6012
condition: used
machine type: other 
location of machine: uk

machine details
the power of cnc on your bench
now you can bring the power and capabilities of an industrial cnc router to your desk. the benchtop series is the first desktop model with the rigid build of an industrial cnc machine. designed with industrial ball screws on every axis and equipped with 20mm linear rail, you get better motion and more control than any other machine in this price or size range.


the benchtop series revolutionizes the desktop market with a high-quality construction that has not previously been available in a machine of this size. the benchtop series is perfect for educational settings, hobbyist shops, and startup companies where a large machine simply is not possible or necessary. complete with manufacturer lifetime tech support, this machine is perfect for every user from a novice to the most experienced cnc user.


contact us today to find out how you can get everything you need from a cnc router that fits right on your desk.

specs:
working area 600*1200*150mm.

2.2kw water coolant spindle.

yako stepper driver.

86 series stepper motor.

dsp a11 controller.

20mm linear rail.

all axes ballscrew transmission.

auto tool zero sensor.

cast iron structure.

materials cut.
benchtop series cnc can accurately cut virtually any hard material including:

wood
acrylic
plastic
foam
aluminum
brass
and more
software.
so, what software is involved in cnc? there are primarily three parts:

your cad (computer aided design) software is where you design your parts to be routed, lathed, milled, or cut.
cam (computer aided manufacturing) software converts your cad drawings into g-code, which is the programming language that the cnc control software understands.
the cnc control software (which is the controller of the machine)then reads the g-code and turns it into motion to drive your machine.
software we recommend (cad/cam all in one)

vectric aspire
autodesk fusion 360
mozaik. specialized in cabinet & furniture
cad software

google sketchup
blender
caligari truespace
wings 3d
moi3d
corel cad
artcam
solidworks
rhinocad
solidedge
autocad
turbocad
alibre
cam software

heeks cad/cam
g-simple
freemill
dolphin cad/cam
cambam
vizion (artcam)
onecnc
virtualgibbs
mastercam
bobcad-cam
ram
meshcam
visualmill
turbocadcam
deskcnc
sheetcam
onecnc
sprutcam
edgecam
artcam MAKE: ALPHACNC MODEL: BENCHTOP WOOD ROUTING CNC MACHINE SERIES BT-6012 CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: UK MACHINE DETAILS THE POWER OF CNC ON YOUR BENCH NOW YOU CAN BRING THE POWER AND CAPABILITIES OF AN INDUSTRIAL CNC ROUTER TO YOUR DESK. THE BENCHTOP SERIES IS THE FIRST DESKTOP MODEL WITH THE RIGID BUILD OF AN INDUSTRIAL CNC MACHINE. DESIGNED WITH INDUSTRIAL BALL SCREWS ON EVERY AXIS AND EQUIPPED WITH 20MM LINEAR RAIL, YOU GET BETTER MOTION AND MORE CONTROL THAN ANY OTHER MACHINE IN THIS PRICE OR SIZE RANGE. THE BENCHTOP SERIES REVOLUTIONIZES THE DESKTOP MARKET WITH A HIGH-QUALITY CONSTRUCTION THAT HAS NOT PREVIOUSLY BEEN AVAILABLE IN A MACHINE OF THIS SIZE. THE BENCHTOP SERIES IS PERFECT FOR EDUCATIONAL SETTINGS, HOBBYIST SHOPS, AND STARTUP COMPANIES WHERE A LARGE MACHINE SIMPLY IS NOT POSSIBLE OR NECESSARY. COMPLETE WITH MANUFACTURER LIFETIME TECH SUPPORT, THIS MACHINE IS PERFECT FOR EVERY USER FROM A NOVICE TO THE MOST EXPERIENCED CNC USER. CONTACT US TODAY TO FIND OUT HOW YOU CAN GET EVERYTHING YOU NEED FROM A CNC ROUTER THAT FITS RIGHT ON YOUR DESK. SPECS: WORKING AREA 600*1200*150MM. 2.2KW WATER COOLANT SPINDLE. YAKO STEPPER DRIVER. 86 SERIES STEPPER MOTOR. DSP A11 CONTROLLER. 20MM LINEAR RAIL. ALL AXES BALLSCREW TRANSMISSION. AUTO TOOL ZERO SENSOR. CAST IRON STRUCTURE. MATERIALS CUT. BENCHTOP SERIES CNC CAN ACCURATELY CUT VIRTUALLY ANY HARD MATERIAL INCLUDING: WOOD ACRYLIC PLASTIC FOAM ALUMINUM BRASS AND MORE SOFTWARE. SO, WHAT SOFTWARE IS INVOLVED IN CNC? THERE ARE PRIMARILY THREE PARTS: YOUR CAD (COMPUTER AIDED DESIGN) SOFTWARE IS WHERE YOU DESIGN YOUR PARTS TO BE ROUTED, LATHED, MILLED, OR CUT. CAM (COMPUTER AIDED MANUFACTURING) SOFTWARE CONVERTS YOUR CAD DRAWINGS INTO G-CODE, WHICH IS THE PROGRAMMING LANGUAGE THAT THE CNC CONTROL SOFTWARE UNDERSTANDS. THE CNC CONTROL SOFTWARE (WHICH IS THE CONTROLLER OF THE MACHINE)THEN READS THE G-CODE AND TURNS IT INTO MOTION TO DRIVE YOUR MACHINE. SOFTWARE WE RECOMMEND (CAD/CAM ALL IN ONE) VECTRIC ASPIRE AUTODESK FUSION 360 MOZAIK. SPECIALIZED IN CABINET & FURNITURE CAD SOFTWARE GOOGLE SKETCHUP BLENDER CALIGARI TRUESPACE WINGS 3D MOI3D COREL CAD ARTCAM SOLIDWORKS RHINOCAD SOLIDEDGE AUTOCAD TURBOCAD ALIBRE CAM SOFTWARE HEEKS CAD/CAM G-SIMPLE FREEMILL DOLPHIN CAD/CAM CAMBAM VIZION (ARTCAM) ONECNC VIRTUALGIBBS MASTERCAM BOBCAD-CAM RAM MESHCAM VISUALMILL TURBOCADCAM DESKCNC SHEETCAM ONECNC SPRUTCAM EDGECAM ARTCAM
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-max. 120 kg flour, 2 speeds, 2 timers\r\ndoughhook stainless steel\r\ninclude 2 stainless steel bowl\r\n MAX. 120 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NDOUGHHOOK STAINLESS STEEL\R\NINCLUDE 2 STAINLESS STEEL BOWL\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-2 colling towers, 
manu: yerushalmi. 
l:1700mm 
w:1700mm 
h:1800mm. 
incl 2 water pumps.
  2 COLLING TOWERS, MANU: YERUSHALMI. L:1700MM W:1700MM H:1800MM. INCL 2 WATER PUMPS.
Vendedor: Meco ltd.
Año de construcción: usado
Ubicación: Land-max. 120 kg flour, 2 speeds, 2 timers\r\ndoughhook stainless steel\r\ninclude 2 stainless steel bowls MAX. 120 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NDOUGHHOOK STAINLESS STEEL\R\NINCLUDE 2 STAINLESS STEEL BOWLS
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-uht system
build: 2006
uht therm aspetic
4000 liter per hour

tetra alex 20
homogeniser

tetra almix
high shear injection mixer

  UHT SYSTEM BUILD: 2006 UHT THERM ASPETIC 4000 LITER PER HOUR TETRA ALEX 20 HOMOGENISER TETRA ALMIX HIGH SHEAR INJECTION MIXER
Vendedor: Mazuba GmbH
Año de construcción: usado
Ubicación: Land-max. 75 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl, safety  device\r\n MAX. 75 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-stock number: u2244-2
used stainless steel twin ribbons mixer by palmia (finland) with total volume of mixing chamber 6000 l. internal dimensions of mixing chamber: width 1810 mm x length 2970 mm x depth 1200 mm. mixer has two twin ribbons each is chain driven by el. motor 22 kw, 1470 rpm, 400/690v, 50 hz and gearbox. working rotation of each ribbon is up to 20.5 rpm. mixer has open top and two discharge outlets at front wall equipped with lids operated pneumatically. machine is mounted on stainless steel supporting frame and 4 stainless steel legs.  STOCK NUMBER: U2244-2 USED STAINLESS STEEL TWIN RIBBONS MIXER BY PALMIA (FINLAND) WITH TOTAL VOLUME OF MIXING CHAMBER 6000 L. INTERNAL DIMENSIONS OF MIXING CHAMBER: WIDTH 1810 MM X LENGTH 2970 MM X DEPTH 1200 MM. MIXER HAS TWO TWIN RIBBONS EACH IS CHAIN DRIVEN BY EL. MOTOR 22 KW, 1470 RPM, 400/690V, 50 HZ AND GEARBOX. WORKING ROTATION OF EACH RIBBON IS UP TO 20.5 RPM. MIXER HAS OPEN TOP AND TWO DISCHARGE OUTLETS AT FRONT WALL EQUIPPED WITH LIDS OPERATED PNEUMATICALLY. MACHINE IS MOUNTED ON STAINLESS STEEL SUPPORTING FRAME AND 4 STAINLESS STEEL LEGS.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Ubicación: Land-max. 80 kg flour, 2 speeds, 2 timers\r\n2 stainless steel bowls, protection device\r\ndoughhook stainless steel\r\ncomputer control unused\r\n\r\ncategory: bakery machine\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new\r\n MAX. 80 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\N2 STAINLESS STEEL BOWLS, PROTECTION DEVICE\R\NDOUGHHOOK STAINLESS STEEL\R\NCOMPUTER CONTROL UNUSED\R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-tetra pak tba 19 250ml prisma filling line:
1-tba 19 250ml prisma filler, version 10, working hours 6000 only
2-tsa 21 straw applicator
3-tcbp 70 packer
4-tetra easy ride
5-tetra almix
6-conveyors & paper trolly
 
condition:full line tpa 19 250 in a very good conditions and running hours on the filling machine is very reasonable. TETRA PAK TBA 19 250ML PRISMA FILLING LINE: 1-TBA 19 250ML PRISMA FILLER, VERSION 10, WORKING HOURS 6000 ONLY 2-TSA 21 STRAW APPLICATOR 3-TCBP 70 PACKER 4-TETRA EASY RIDE 5-TETRA ALMIX 6-CONVEYORS & PAPER TROLLY CONDITION:FULL LINE TPA 19 250 IN A VERY GOOD CONDITIONS AND RUNNING HOURS ON THE FILLING MACHINE IS VERY REASONABLE.
Vendedor: Used Sweden Machines
Año de construcción: usado
Precio: used machinery auction RESALE 19.750 €
Ubicación: Land-sagemis international after burning regenerative thermal oxidizer 25.000nm3/h, composed by combustion chamber with burner and no.2 energy dissipation sections recovery, smoke exhaust through ceramic bed, in-air temperature 70-120°c. contaminant: cot 300 mg/nm3; co 500 mg/nm3; dust <10 mg/nm3 -emission value: cot <10 mg/nm3; co <100 mg/nm3; dust <10 mg/nm3, nox <50 mg/nm3; so2 <50 mg/nm3; ipa <0.01 mg/nm3 - weight and size: w=2,5mt; width including burner's safety boardwalk 4,2mt; lenght 8,0mt; hight 6,0mt; total weight 39ton -details included as pdf. - location: dalmine (bg) SAGEMIS INTERNATIONAL AFTER BURNING REGENERATIVE THERMAL OXIDIZER 25.000NM3/H, COMPOSED BY COMBUSTION CHAMBER WITH BURNER AND NO.2 ENERGY DISSIPATION SECTIONS RECOVERY, SMOKE EXHAUST THROUGH CERAMIC BED, IN-AIR TEMPERATURE 70-120°C. CONTAMINANT: COT 300 MG/NM3; CO 500 MG/NM3; DUST <10 MG/NM3 -EMISSION VALUE: COT <10 MG/NM3; CO <100 MG/NM3; DUST <10 MG/NM3, NOX <50 MG/NM3; SO2 <50 MG/NM3; IPA <0.01 MG/NM3 - WEIGHT AND SIZE: W=2,5MT; WIDTH INCLUDING BURNER'S SAFETY BOARDWALK 4,2MT; LENGHT 8,0MT; HIGHT 6,0MT; TOTAL WEIGHT 39TON -DETAILS INCLUDED AS PDF. - LOCATION: DALMINE (BG)
Vendedor: Troostwijk Auctions
Año de construcción: usado
Ubicación: Land-max. 180 kg dough, 2 speeds, 2 timers\r\ninclude 2 moveable bowls stainless steel\r\nsafety device MAX. 180 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\NINCLUDE 2 MOVEABLE BOWLS STAINLESS STEEL\R\NSAFETY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-max. 125 kg flour, 2 speeds, 2 timers, \r\ninclude 2 moveable bowls stainless steel\r\nsafety device,\r\n MAX. 125 KG FLOUR, 2 SPEEDS, 2 TIMERS, \R\NINCLUDE 2 MOVEABLE BOWLS STAINLESS STEEL\R\NSAFETY DEVICE,\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-450l stainless twin shaft paddle mixer, forward/reverse, two side doors for product discharge
 450L STAINLESS TWIN SHAFT PADDLE MIXER, FORWARD/REVERSE, TWO SIDE DOORS FOR PRODUCT DISCHARGE
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-max. 15 kg flour/ 24 kg dough, 2 speeds,  timer,\r\nstainless steel bowl + spiral, safety device MAX. 15 KG FLOUR/ 24 KG DOUGH, 2 SPEEDS, TIMER,\R\NSTAINLESS STEEL BOWL + SPIRAL, SAFETY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-power: 22 kw
capacity: 3 m3/min
pressure: 10 bar
supply voltage: 400v/50 hz
year of production: 2010 POWER: 22 KW CAPACITY: 3 M3/MIN PRESSURE: 10 BAR SUPPLY VOLTAGE: 400V/50 HZ YEAR OF PRODUCTION: 2010
Vendedor: CzeMar-Serwis
Año de construcción: usado
Ubicación: Land-max. 120 kg dough, 2 speeds, 2 timers\r\nstainless steel bowl, saftey device MAX. 120 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL, SAFTEY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 2.400 €
Ubicación: Land-a fully functional screw compressor

capacity 2,24 m3/min;
engine 15 kw;
pressure 8 bar;

 A FULLY FUNCTIONAL SCREW COMPRESSOR CAPACITY 2,24 M3/MIN; ENGINE 15 KW; PRESSURE 8 BAR;
Vendedor: P.H.U. Airspaw
Año de construcción: usado
Ubicación: Land-max. 240 kg dough, safty device\r\n2 speeds, 2 timers, hydraulic fixing the bowl\r\ndoughhook stainless steel\r\n1 moveable stainless steel bowls\r\n MAX. 240 KG DOUGH, SAFTY DEVICE\R\N2 SPEEDS, 2 TIMERS, HYDRAULIC FIXING THE BOWL\R\NDOUGHHOOK STAINLESS STEEL\R\N1 MOVEABLE STAINLESS STEEL BOWLS\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-ungebr. exhibit

technical data
	
band size 150 x 2000 mm
speed 30 m / sec.
from grinding diameter 20-114.3 mm
dimensions (lxwxh) 1450 x 1200 x 850 mm connection 400 v
power 4 kw
weight approx. 	260 kg

incl. 4 grinding wheels 1 â½ "2", 2 1/2 "and 3" UNGEBR. EXHIBIT TECHNICAL DATA BAND SIZE 150 X 2000 MM SPEED 30 M / SEC. FROM GRINDING DIAMETER 20-114.3 MM DIMENSIONS (LXWXH) 1450 X 1200 X 850 MM CONNECTION 400 V POWER 4 KW WEIGHT APPROX. 260 KG INCL. 4 GRINDING WHEELS 1 &ACIRC;&FRAC12; "2", 2 1/2 "AND 3"
Vendedor: Oeben Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-max. 120 kg dough, 2 speeds, 2 timers\r\nspiral +  bowl stainless steel, safety device MAX. 120 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\NSPIRAL + BOWL STAINLESS STEEL, SAFETY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-vakummischer, universal mixer, cream boilers, salbenkesselbetreibsdurck: 1-3 bar process capacity: 175 litres max. temp.: 143 â° c  VAKUMMISCHER, UNIVERSAL MIXER, CREAM BOILERS, SALBENKESSELBETREIBSDURCK: 1-3 BAR PROCESS CAPACITY: 175 LITRES MAX. TEMP.: 143 &ACIRC;&DEG; C
Vendedor: unipo Gebäudemanagement GmbH
Año de construcción: usado
Ubicación: Land-max. 50 kg flour, 2 speeds,  timers\r\ndigital instruments, 2 stainless steel bowls,\r\ndoughhook stainless steel, safety device, \r\n\r\ncategory: bakery machine\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new MAX. 50 KG FLOUR, 2 SPEEDS, TIMERS\R\NDIGITAL INSTRUMENTS, 2 STAINLESS STEEL BOWLS,\R\NDOUGHHOOK STAINLESS STEEL, SAFETY DEVICE, \R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-max. 30 kg flour, 2 speeds, 1 timer\r\nstainless steel bowls + spiral, safety device MAX. 30 KG FLOUR, 2 SPEEDS, 1 TIMER\R\NSTAINLESS STEEL BOWLS + SPIRAL, SAFETY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 3.060 €
Ubicación: Land-: 100 x 2.000 mm<br/>: 20 - 76,1 mm<br/>: 3 kw<br/>: 190 kg<br/>the lever operated al100u-01 can grind material from Ø 20 mm to Ø 76.1 mm. its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°.<br/>the almi al100u-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials.<br/>almi?s belt tensioning system simplifies tensioning the grinding belt. the belt is tensioned using the hexagonal spanner supplied with the machine. the grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.<br/>all pipe grinders are equipped with a deburring table.<br/><br/>incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm<br/><br/><br/><br/>grinding belt: 100 x 2.000 mm<br/>pipe Ø: 20 - 76,1 mm<br/>motor: 3 kw<br/>lever operation system: yes<br/>handwheels operation: no<br/>weight: 190 kg<br/><br/><br/><br/> : 100 X 2.000 MM
: 20 - 76,1 MM
: 3 KW
: 190 KG
THE LEVER OPERATED AL100U-01 CAN GRIND MATERIAL FROM Ø 20 MM TO Ø 76.1 MM. ITS COMPOUND SLIDE AND CARRIAGE WITH ROTATABLE CLAMP ARE CONTINUALLY ADJUSTABLE ALLOWING THE MACHINE TO GRIND ALL PIPE SECTIONS AT ANY ANGLE BETWEEN 30° AND 90°.
THE ALMI AL100U-01 CAN BE USED TO GRIND SQUARE, RECTANGULAR AND ROUND PIPES WITH A RANGE OF WALL THICKNESSES AND IS SUITABLE FOR ALL CUSTOMARY TYPES OF MATERIALS.
ALMI?S BELT TENSIONING SYSTEM SIMPLIFIES TENSIONING THE GRINDING BELT. THE BELT IS TENSIONED USING THE HEXAGONAL SPANNER SUPPLIED WITH THE MACHINE. THE GRINDING BELT CAN BE TENSIONED QUICKLY AND THE GRINDING ROLLERS CAN BE CHANGED IN SECONDS.
ALL PIPE GRINDERS ARE EQUIPPED WITH A DEBURRING TABLE.

INCL. 5 PCS. GRINDING BELTS, 1 PCE. GRINDING ROLL Ø. 42,4 MM



GRINDING BELT: 100 X 2.000 MM
PIPE Ø: 20 - 76,1 MM
MOTOR: 3 KW
LEVER OPERATION SYSTEM: YES
HANDWHEELS OPERATION: NO
WEIGHT: 190 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 3.560 €
Ubicación: Land-: 100 x 2.000 mm<br/>: 20 - 76,1 mm<br/>: 3 kw<br/>: 220 kg<br/>the al100u-02 can be operated with two hand-wheels or a lever. the machine is equipped with both options. the al100 u-02 can grind material from Ø 20 mm to Ø 76 mm. the compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.<br/>the almi al100u-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials.<br/>almi?s belt tensioning system makes tensioning the grinding belt even easier. the belt is tensioned using the hexagonal spanner supplied with the machine.<br/>the grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.<br/>all pipe grinders are equipped with a deburring table.<br/>incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm<br/><br/><br/><br/>grinding belt: 100 x 2.000 mm<br/>pipe Ø: 20 - 76,1 mm<br/>motor: 3 kw<br/>lever operation system: yes<br/>handwheels operation: yes<br/>weight: 220 kg<br/><br/><br/><br/> : 100 X 2.000 MM
: 20 - 76,1 MM
: 3 KW
: 220 KG
THE AL100U-02 CAN BE OPERATED WITH TWO HAND-WHEELS OR A LEVER. THE MACHINE IS EQUIPPED WITH BOTH OPTIONS. THE AL100 U-02 CAN GRIND MATERIAL FROM Ø 20 MM TO Ø 76 MM. THE COMPOUND SLIDE AND CARRIAGE WITH ROTATABLE CLAMP ARE CONTINUALLY ADJUSTABLE, WHICH MEANS THE MACHINE CAN GRIND ALL PIPE SECTIONS AT EVERY REQUIRED ANGLE BETWEEN 30° AND 90°.
THE ALMI AL100U-02 CAN BE USED TO GRIND SQUARE, RECTANGULAR AND ROUND PIPES WITH A RANGE OF WALL THICKNESSES AND IS SUITABLE FOR ALL CUSTOMARY TYPES OF MATERIALS.
ALMI?S BELT TENSIONING SYSTEM MAKES TENSIONING THE GRINDING BELT EVEN EASIER. THE BELT IS TENSIONED USING THE HEXAGONAL SPANNER SUPPLIED WITH THE MACHINE.
THE GRINDING BELT CAN BE TENSIONED QUICKLY AND THE GRINDING ROLLERS CAN BE CHANGED IN SECONDS.
ALL PIPE GRINDERS ARE EQUIPPED WITH A DEBURRING TABLE.
INCL. 5 PCS. GRINDING BELTS, 1 PCE. GRINDING ROLL Ø. 42,4 MM



GRINDING BELT: 100 X 2.000 MM
PIPE Ø: 20 - 76,1 MM
MOTOR: 3 KW
LEVER OPERATION SYSTEM: YES
HANDWHEELS OPERATION: YES
WEIGHT: 220 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 4.660 €
Ubicación: Land-: 150 x 2.000 mm<br/>: 20 - 114,3 mm<br/>: 4 kw<br/>: 270 kg<br/>the al150 can be operated with two hand-wheels or a lever. the machine is equipped with both options.<br/><br/>the al150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. the compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.<br/><br/>the almi al150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. almi?s belt tensioning system makes tensioning the grinding belt even easier. the belt is tensioned using the hexagonal spanner supplied with the machine.<br/><br/>the grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.all pipe grinders are equipped with a deburring table.<br/><br/>incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm<br/><br/>(sample photo)<br/><br/><br/><br/>grinding belt: 150 x 2.000 mm<br/>pipe Ø: 20 - 114,3 mm<br/>motor: 4 kw<br/>lever operation system: yes<br/>handwheels operation: yes<br/>weight: 270 kg<br/><br/><br/><br/> : 150 X 2.000 MM
: 20 - 114,3 MM
: 4 KW
: 270 KG
THE AL150 CAN BE OPERATED WITH TWO HAND-WHEELS OR A LEVER. THE MACHINE IS EQUIPPED WITH BOTH OPTIONS.

THE AL150 CAN BE USED TO GRIND MATERIAL FROM Ø 20 MM TOT Ø 114.3 MM. THE COMPOUND SLIDE AND CARRIAGE WITH ROTATABLE CLAMP ARE CONTINUALLY ADJUSTABLE, WHICH MEANS THE MACHINE CAN GRIND ALL PIPE SECTIONS AT EVERY REQUIRED ANGLE BETWEEN 30° AND 90°.

THE ALMI AL150 CAN BE USED TO GRIND SQUARE, RECTANGULAR AND ROUND PIPES WITH A RANGE OF WALL THICKNESSES AND IS SUITABLE FOR ALL CUSTOMARY TYPES OF MATERIALS. ALMI?S BELT TENSIONING SYSTEM MAKES TENSIONING THE GRINDING BELT EVEN EASIER. THE BELT IS TENSIONED USING THE HEXAGONAL SPANNER SUPPLIED WITH THE MACHINE.

THE GRINDING BELT CAN BE TENSIONED QUICKLY AND THE GRINDING ROLLERS CAN BE CHANGED IN SECONDS.ALL PIPE GRINDERS ARE EQUIPPED WITH A DEBURRING TABLE.

INCL. 5 PCS. GRINDING BELTS, 1 PCE. GRINDING ROLL Ø. 42,4 MM

(SAMPLE PHOTO)



GRINDING BELT: 150 X 2.000 MM
PIPE Ø: 20 - 114,3 MM
MOTOR: 4 KW
LEVER OPERATION SYSTEM: YES
HANDWHEELS OPERATION: YES
WEIGHT: 270 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 5.790 €
Ubicación: Land-: 150 x 2.000 mm<br/>: 20 - 114,3 mm<br/>: 4 kw<br/>: 270 kg<br/>the new al150hs 2 in 1 machine: grinding belt and pipe grinder. high speed belt thanks to a unique transmission, up to 150ft/per second. <br/><br/>the benefits of the al150hs: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. the al150hs can be operated with two hand-wheels or a lever. the machine is equipped with both options. <br/><br/>the al150hs can be used to grind material from Ø 20 mm tot Ø 114.3 mm. the compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. <br/><br/>the almi al150hs can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. almi?s belt tensioning system makes tensioning the grinding belt even easier. <br/><br/>the belt is tensioned using the hexagonal spanner supplied with the machine. the grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. all pipe grinders are equipped with a deburring table.<br/><br/>incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/><br/>grinding belt: 150 x 2.000 mm<br/>pipe Ø: 20 - 114,3 mm<br/>motor: 4 kw<br/>lever operation system: yes<br/>handwheels operation: yes<br/>weight: 270 kg<br/><br/><br/><br/> : 150 X 2.000 MM
: 20 - 114,3 MM
: 4 KW
: 270 KG
THE NEW AL150HS 2 IN 1 MACHINE: GRINDING BELT AND PIPE GRINDER. HIGH SPEED BELT THANKS TO A UNIQUE TRANSMISSION, UP TO 150FT/PER SECOND.

THE BENEFITS OF THE AL150HS: LESS DUST/PARTICULES, LESS CHANGE OF COLOUR AND LONGER BELT LIFE (2 TO 3 TIMES) DUE TO HIGH SPEED. THE AL150HS CAN BE OPERATED WITH TWO HAND-WHEELS OR A LEVER. THE MACHINE IS EQUIPPED WITH BOTH OPTIONS.

THE AL150HS CAN BE USED TO GRIND MATERIAL FROM Ø 20 MM TOT Ø 114.3 MM. THE COMPOUND SLIDE AND CARRIAGE WITH ROTATABLE CLAMP ARE CONTINUALLY ADJUSTABLE, WHICH MEANS THE MACHINE CAN GRIND ALL PIPE SECTIONS AT EVERY REQUIRED ANGLE BETWEEN 30° AND 90°.

THE ALMI AL150HS CAN BE USED TO GRIND SQUARE, RECTANGULAR AND ROUND PIPES WITH A RANGE OF WALL THICKNESSES AND IS SUITABLE FOR ALL CUSTOMARY TYPES OF MATERIALS. ALMI?S BELT TENSIONING SYSTEM MAKES TENSIONING THE GRINDING BELT EVEN EASIER.

THE BELT IS TENSIONED USING THE HEXAGONAL SPANNER SUPPLIED WITH THE MACHINE. THE GRINDING BELT CAN BE TENSIONED QUICKLY AND THE GRINDING ROLLERS CAN BE CHANGED IN SECONDS. ALL PIPE GRINDERS ARE EQUIPPED WITH A DEBURRING TABLE.

INCL. 5 PCS. GRINDING BELTS, 1 PCE. GRINDING ROLL Ø. 42,4 MM

(SAMPLE PHOTO)







GRINDING BELT: 150 X 2.000 MM
PIPE Ø: 20 - 114,3 MM
MOTOR: 4 KW
LEVER OPERATION SYSTEM: YES
HANDWHEELS OPERATION: YES
WEIGHT: 270 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-width of the strips: 100 mm<br/>band length: 2000 mm<br/>tube diameter: 20,0 - 76,1 mm<br/>grinding width: 100 mm<br/>band speed: 30 m/sek<br/>total power requirement: 3,0 kw<br/>weight of the machine ca.: 190 kg<br/><br/><br/><br/><br/> WIDTH OF THE STRIPS: 100 MM
BAND LENGTH: 2000 MM
TUBE DIAMETER: 20,0 - 76,1 MM
GRINDING WIDTH: 100 MM
BAND SPEED: 30 M/SEK
TOTAL POWER REQUIREMENT: 3,0 KW
WEIGHT OF THE MACHINE CA.: 190 KG




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.150 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 700 x 1400 x 1400 mm<br/>description: including grinding belt length approx. 2000 mm, width max. approx. 100 mm, 4 pulleys diameter 25/30/40/50 mm, vice with angular adjustment, ce declaration of conformity available WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 1400 X 1400 MM
DESCRIPTION: INCLUDING GRINDING BELT LENGTH APPROX. 2000 MM, WIDTH MAX. APPROX. 100 MM, 4 PULLEYS DIAMETER 25/30/40/50 MM, VICE WITH ANGULAR ADJUSTMENT, CE DECLARATION OF CONFORMITY AVAILABLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-: 42,4, 48,3 mm<br/>: 1 1/4, 1 1/2 zoll<br/>wall thickness max.: 4 mm<br/>wall strength: va   3 mm<br/>weight of the machine ca.: 15 kg<br/><br/><br/><br/><br/> : 42,4, 48,3 MM
: 1 1/4, 1 1/2 ZOLL
WALL THICKNESS MAX.: 4 MM
WALL STRENGTH: VA 3 MM
WEIGHT OF THE MACHINE CA.: 15 KG




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-tube diameter: 20 . 76,1 mm<br/>band speed: 30 m/sec<br/>engine output: 3 kw<br/>grinding band dimension: 100 x 2000 mm<br/>voltage: 230 oder 400 v<br/>: 2905 u/min<br/>dimensions: 1450 x 1150 x 650 mm<br/>weight: 210 kg<br/><br/><br/><br/><br/> TUBE DIAMETER: 20 . 76,1 MM
BAND SPEED: 30 M/SEC
ENGINE OUTPUT: 3 KW
GRINDING BAND DIMENSION: 100 X 2000 MM
VOLTAGE: 230 ODER 400 V
: 2905 U/MIN
DIMENSIONS: 1450 X 1150 X 650 MM
WEIGHT: 210 KG




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-: 27 / 34,8 / 42,8 /49 / 61 mm<br/>wall thickness max.: 5 mm<br/>wall strength: va   4 mm<br/>voltage: 230 oder 400 v<br/>total power requirement: 2,2 kw<br/>weight of the machine ca.: 93 kg<br/><br/><br/><br/><br/> : 27 / 34,8 / 42,8 /49 / 61 MM
WALL THICKNESS MAX.: 5 MM
WALL STRENGTH: VA 4 MM
VOLTAGE: 230 ODER 400 V
TOTAL POWER REQUIREMENT: 2,2 KW
WEIGHT OF THE MACHINE CA.: 93 KG




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-wall thickness max.: 5 mm<br/>wall strength: va  4 mm<br/>: 26,9/33,7/42,4 /48,3/60,3 mm<br/>: 3/4,  - 2 zoll<br/>total power requirement: 2,2 kw<br/>voltage: 230 oder  400 v<br/>weight of the machine ca.: 87 kg<br/><br/><br/><br/><br/> WALL THICKNESS MAX.: 5 MM
WALL STRENGTH: VA 4 MM
: 26,9/33,7/42,4 /48,3/60,3 MM
: 3/4, - 2 ZOLL
TOTAL POWER REQUIREMENT: 2,2 KW
VOLTAGE: 230 ODER 400 V
WEIGHT OF THE MACHINE CA.: 87 KG




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-tube diameter: 20 - 114,3 mm<br/>engine output: 4 kw<br/>grinding band dimension: 150 x 2000 mm<br/>band speed: 30 prm<br/>voltage: 230 oder 400 v<br/>weight: 270 kg<br/><br/><br/><br/><br/> TUBE DIAMETER: 20 - 114,3 MM
ENGINE OUTPUT: 4 KW
GRINDING BAND DIMENSION: 150 X 2000 MM
BAND SPEED: 30 PRM
VOLTAGE: 230 ODER 400 V
WEIGHT: 270 KG




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-: 48,3 / 60,3 mm<br/>: 1 1/2, und 2 zoll<br/>wall thickness max.: 4 mm<br/>wall strength: va  3 mm<br/>weight of the machine ca.: 15 kg<br/><br/><br/><br/><br/> : 48,3 / 60,3 MM
: 1 1/2, UND 2 ZOLL
WALL THICKNESS MAX.: 4 MM
WALL STRENGTH: VA 3 MM
WEIGHT OF THE MACHINE CA.: 15 KG




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-wall thickness max.: 4 mm<br/>: 27 - 61 mm<br/>wall thickness:   va  3 mm mm<br/>weight of the machine ca.: 7 kg<br/><br/><br/><br/><br/> WALL THICKNESS MAX.: 4 MM
: 27 - 61 MM
WALL THICKNESS: VA 3 MM MM
WEIGHT OF THE MACHINE CA.: 7 KG




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-tube diameter: 20 - 114,3 mm<br/>grinding band dimension: 150 x 2000 mm<br/>band speed: 45 m/min.<br/>voltage: 400 v<br/>range of angles: 20 - 90 °<br/>weight: 275 kg<br/>the new al150hs 2 in 1 machine: grinding belt and pipe grinder. high speed belt thanks to a unique transmission, up to 150ft/per second. the benefits of the al150hs: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed.the al150hs can be operated with two hand-wheels or a lever. the machine is equipped with both options. the al150hs can be used to grind material from Ø 20 mm tot Ø 114.3 mm.the compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.the almi al150hs can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials.almi?s belt tensioning system makes tensioning the grinding belt even easier. the belt is tensioned using the hexagonal spanner supplied with the machine.the grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.all pipe grinders are equipped with a deburring table.<br/><br/><br/><br/><br/> TUBE DIAMETER: 20 - 114,3 MM
GRINDING BAND DIMENSION: 150 X 2000 MM
BAND SPEED: 45 M/MIN.
VOLTAGE: 400 V
RANGE OF ANGLES: 20 - 90 °
WEIGHT: 275 KG
THE NEW AL150HS 2 IN 1 MACHINE: GRINDING BELT AND PIPE GRINDER. HIGH SPEED BELT THANKS TO A UNIQUE TRANSMISSION, UP TO 150FT/PER SECOND. THE BENEFITS OF THE AL150HS: LESS DUST/PARTICULES, LESS CHANGE OF COLOUR AND LONGER BELT LIFE (2 TO 3 TIMES) DUE TO HIGH SPEED.THE AL150HS CAN BE OPERATED WITH TWO HAND-WHEELS OR A LEVER. THE MACHINE IS EQUIPPED WITH BOTH OPTIONS. THE AL150HS CAN BE USED TO GRIND MATERIAL FROM Ø 20 MM TOT Ø 114.3 MM.THE COMPOUND SLIDE AND CARRIAGE WITH ROTATABLE CLAMP ARE CONTINUALLY ADJUSTABLE, WHICH MEANS THE MACHINE CAN GRIND ALL PIPE SECTIONS AT EVERY REQUIRED ANGLE BETWEEN 30° AND 90°.THE ALMI AL150HS CAN BE USED TO GRIND SQUARE, RECTANGULAR AND ROUND PIPES WITH A RANGE OF WALL THICKNESSES AND IS SUITABLE FOR ALL CUSTOMARY TYPES OF MATERIALS.ALMI?S BELT TENSIONING SYSTEM MAKES TENSIONING THE GRINDING BELT EVEN EASIER. THE BELT IS TENSIONED USING THE HEXAGONAL SPANNER SUPPLIED WITH THE MACHINE.THE GRINDING BELT CAN BE TENSIONED QUICKLY AND THE GRINDING ROLLERS CAN BE CHANGED IN SECONDS.ALL PIPE GRINDERS ARE EQUIPPED WITH A DEBURRING TABLE.




Vendedor: Sperling Werkzeugmaschinen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ALMI types: