668 ofertas

Año de construcción: usado
Ubicación: Land-dough dividing and knitting machine / head unit model: fortuna km 4

4 rows
weight range from 35 to 80 grams
power max 5300 pieces / hour
spreading belts work direction from left to right
connection 400v,4 kw, 16a-cee plug DOUGH DIVIDING AND KNITTING MACHINE / HEAD UNIT MODEL: FORTUNA KM 4 4 ROWS WEIGHT RANGE FROM 35 TO 80 GRAMS POWER MAX 5300 PIECES / HOUR SPREADING BELTS WORK DIRECTION FROM LEFT TO RIGHT CONNECTION 400V,4 KW, 16A-CEE PLUG
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-working width 1000 mm, working height 170 mm\r\nslicing width 830 mm, thickness 10,7 mm\r\nvariable speed of automatic infeed, \r\nstainless steel, model 2003 WORKING WIDTH 1000 MM, WORKING HEIGHT 170 MM\R\NSLICING WIDTH 830 MM, THICKNESS 10,7 MM\R\NVARIABLE SPEED OF AUTOMATIC INFEED, \R\NSTAINLESS STEEL, MODEL 2003
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-lifting tipper w & p
model: hkl 1600
wheels with locking device
suitable for diosna tank car
connection 400v, 16a-cee plug
dimensions: approx. 1300 x 1500 x 2400 mm
used unit without warranty of LIFTING TIPPER W & P MODEL: HKL 1600 WHEELS WITH LOCKING DEVICE SUITABLE FOR DIOSNA TANK CAR CONNECTION 400V, 16A-CEE PLUG DIMENSIONS: APPROX. 1300 X 1500 X 2400 MM USED UNIT WITHOUT WARRANTY OF
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-compact pretzel long roller with cone winder
and feeder universe kasper model: lwt 3/80 premium eb ii w 20 for all poles like kornspitz and fritters, etc. 
universal - suits - winding machine
for all dough to the winding and long roll
long working width 800 mm
the work plate bottom cleaning device
total effective way over 2 levels 2, 5 m
dough deposit of 40-300 grams
stainless steel, bj. 2004
with eb2 feeding device before rolling mill viper
for roll systems with lateral discharge
connection 400v, 16a-cee plug
dimensions: 2200 x 1000 x 1800 mm wxdxh
second-hand machine cleaned and checked COMPACT PRETZEL LONG ROLLER WITH CONE WINDER AND FEEDER UNIVERSE KASPER MODEL: LWT 3/80 PREMIUM EB II W 20 FOR ALL POLES LIKE KORNSPITZ AND FRITTERS, ETC. UNIVERSAL - SUITS - WINDING MACHINE FOR ALL DOUGH TO THE WINDING AND LONG ROLL LONG WORKING WIDTH 800 MM THE WORK PLATE BOTTOM CLEANING DEVICE TOTAL EFFECTIVE WAY OVER 2 LEVELS 2, 5 M DOUGH DEPOSIT OF 40-300 GRAMS STAINLESS STEEL, BJ. 2004 WITH EB2 FEEDING DEVICE BEFORE ROLLING MILL VIPER FOR ROLL SYSTEMS WITH LATERAL DISCHARGE CONNECTION 400V, 16A-CEE PLUG DIMENSIONS: 2200 X 1000 X 1800 MM WXDXH SECOND-HAND MACHINE CLEANED AND CHECKED
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-scale sections 10 g, scaling - platform 310 x 270 mm\r\n SCALE SECTIONS 10 G, SCALING - PLATFORM 310 X 270 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-planetary mixer equipped with air intake
brand: tonelli
model: universal
capacity 120 liters

possibility of supplementary bowls

possibility of refurbishing service
 PLANETARY MIXER EQUIPPED WITH AIR INTAKE BRAND: TONELLI MODEL: UNIVERSAL CAPACITY 120 LITERS POSSIBILITY OF SUPPLEMENTARY BOWLS POSSIBILITY OF REFURBISHING SERVICE
Vendedor: Officine Meccaniche Astra srl
Año de construcción: usado
Ubicación: Land-5 rows, cap. max. 8.200 pcs./h, model 1989/1990,\r\ninclude  \r\ndivider + rounder, type mus - g 5, model 1998\r\n   doughweightrange max. 150 g\r\n    include moulding drum 74 -85 g\r\nintermediate proofer, type zgl5/273/360,\r\n    proofing time approx.10 min.\r\nstamping unit, type fst 5/50\r\nfinal proofer type sg 0,6/1010/950,\r\n    proofing time approx.35 min.\r\nairconditioning\r\ndepositing device, width 600 mm, max. length 800 mm 5 ROWS, CAP. MAX. 8.200 PCS./H, MODEL 1989/1990,\R\NINCLUDE \R\NDIVIDER + ROUNDER, TYPE MUS - G 5, MODEL 1998\R\N DOUGHWEIGHTRANGE MAX. 150 G\R\N INCLUDE MOULDING DRUM 74 -85 G\R\NINTERMEDIATE PROOFER, TYPE ZGL5/273/360,\R\N PROOFING TIME APPROX.10 MIN.\R\NSTAMPING UNIT, TYPE FST 5/50\R\NFINAL PROOFER TYPE SG 0,6/1010/950,\R\N PROOFING TIME APPROX.35 MIN.\R\NAIRCONDITIONING\R\NDEPOSITING DEVICE, WIDTH 600 MM, MAX. LENGTH 800 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-ref.-no. 00518
designation of the plant co2 tube laser cutting system
manufacturer blm model adige laser tube built in 2000
6, 5 m loading 3, 5m discharge laser manufacturer rofin sinar 


 REF.-NO. 00518 DESIGNATION OF THE PLANT CO2 TUBE LASER CUTTING SYSTEM MANUFACTURER BLM MODEL ADIGE LASER TUBE BUILT IN 2000 6, 5 M LOADING 3, 5M DISCHARGE LASER MANUFACTURER ROFIN SINAR
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Ubicación: Land-brand: guntner
model: gvh 080.2d/4e(d)
power: 178,7 kw (r404a, ?t = 15 k)
version: extremely low noise
year of manufacture: 2006
number of fans: 4 pcs.
fan diameter: 800 mm.
air flow: 39600 m3/h
tube volume: 103,7 +31,5 l.
dimensions: 9,7 / 1,55 / 1 m.
weight: 1095 kg.

  horizontal ?ondenser from the brand guntner, with capacity of 178.7 kw, released in 2006. the air-cooled condenser is versioning extremely low noise. it is cooled by 4 fans with a diameter of 800 mm.

  due to direct supply from germany and the netherlands, our air-cooled condensers have the best prices, allowing you to pay less. 
 BRAND: GUNTNER MODEL: GVH 080.2D/4E(D) POWER: 178,7 KW (R404A, ?T = 15 K) VERSION: EXTREMELY LOW NOISE YEAR OF MANUFACTURE: 2006 NUMBER OF FANS: 4 PCS. FAN DIAMETER: 800 MM. AIR FLOW: 39600 M3/H TUBE VOLUME: 103,7 +31,5 L. DIMENSIONS: 9,7 / 1,55 / 1 M. WEIGHT: 1095 KG. HORIZONTAL ?ONDENSER FROM THE BRAND GUNTNER, WITH CAPACITY OF 178.7 KW, RELEASED IN 2006. THE AIR-COOLED CONDENSER IS VERSIONING EXTREMELY LOW NOISE. IT IS COOLED BY 4 FANS WITH A DIAMETER OF 800 MM. DUE TO DIRECT SUPPLY FROM GERMANY AND THE NETHERLANDS, OUR AIR-COOLED CONDENSERS HAVE THE BEST PRICES, ALLOWING YOU TO PAY LESS.
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Ubicación: Land-â?¢ machine type: prefeeder
â?¢ manufacturer: roda converting s.a.
â?¢ model name: fpk 1600
â?¢ year of construction: 2000
â?¢ spare parts: none
â?¢ documents: operating instructions, spare parts books
â?¢ machine availability: now Â?¢ MACHINE TYPE: PREFEEDER Â?¢ MANUFACTURER: RODA CONVERTING S.A. Â?¢ MODEL NAME: FPK 1600 Â?¢ YEAR OF CONSTRUCTION: 2000 Â?¢ SPARE PARTS: NONE Â?¢ DOCUMENTS: OPERATING INSTRUCTIONS, SPARE PARTS BOOKS Â?¢ MACHINE AVAILABILITY: NOW
Vendedor: PP LION GMBH
Año de construcción: usado
Ubicación: Land-modell 650.460.11.35.20, semi automatic\r\nworking width 460 mm, thickness 11 mm,\r\nlubrication system for the knives\r\n MODELL 650.460.11.35.20, SEMI AUTOMATIC\R\NWORKING WIDTH 460 MM, THICKNESS 11 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-heat pad(pocket warmer) producing machine

make:toa kikoh(japan)

year:2013

model : kc-500

cap' : 520sheets/min

4-lane type

dimension : 4,200(w)x12,000(l) x 2,400(h)mm

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567



 HEAT PAD(POCKET WARMER) PRODUCING MACHINE MAKE:TOA KIKOH(JAPAN) YEAR:2013 MODEL : KC-500 CAP' : 520SHEETS/MIN 4-LANE TYPE DIMENSION : 4,200(W)X12,000(L) X 2,400(H)MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-table-model with movable table\r\nworking width 400 mm, thickness 10 mm,\r\nlubrication system for the knives TABLE-MODEL WITH MOVABLE TABLE\R\NWORKING WIDTH 400 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-heat pad(pocket warmer) producing machine

make:toa kikoh(japan)

year:2013

model : kc-500

cap' : 520sheets/min

4-lane type

dimension : 4,200(w)x12,000(l) x 2,400(h)mm

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567



 HEAT PAD(POCKET WARMER) PRODUCING MACHINE MAKE:TOA KIKOH(JAPAN) YEAR:2013 MODEL : KC-500 CAP' : 520SHEETS/MIN 4-LANE TYPE DIMENSION : 4,200(W)X12,000(L) X 2,400(H)MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-model 401, double excenter\r\ncap. max 10.000 pcs./h\r\ndistance between the cups 110 mm, width 900 mm\r\n MODEL 401, DOUBLE EXCENTER\R\NCAP. MAX 10.000 PCS./H\R\NDISTANCE BETWEEN THE CUPS 110 MM, WIDTH 900 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-3500ton  hydro forming press for forming automobile pipes



capacity:3500ton

make:hyprex(japan)

manufacturing year:2001

model:hfp-3500-200

(material pipe)

pipe diameter:max.70mm

pipe thickness: 1.6~2.6mm

pipe length: max.2500mm

(specification)

hydro force: max. 200mpa

forming force: max. 3500ton

structure: 4-columns type

main ram diameter: 800mm x2 sets

up-down stroke:1000mm

side cylinder:180mm x120mm x stroke 1000mm x2sets

daylight:1800mm

tie rod distance: 3030mm x2000mm

moving table size: 3000 x1950mm

down speed: max. 300mm/s(non-load)

up speed: max. 250mm/s

up-down control: hydraulic servo, encoder, closed loop

top die power: max. 15ton

(accessaries)

1.   moving bolster(by hydraulic motor)

-stroke:4250mm

-load capacity:max. 20ton

trans speed:150mm/s

bolster clamper:hydraulic type

2.   die clamper system

3.   hydraulic type die lift


bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


 

 

 

 3500TON HYDRO FORMING PRESS FOR FORMING AUTOMOBILE PIPES CAPACITY:3500TON MAKE:HYPREX(JAPAN) MANUFACTURING YEAR:2001 MODEL:HFP-3500-200 (MATERIAL PIPE) PIPE DIAMETER:MAX.70MM PIPE THICKNESS: 1.6~2.6MM PIPE LENGTH: MAX.2500MM (SPECIFICATION) HYDRO FORCE: MAX. 200MPA FORMING FORCE: MAX. 3500TON STRUCTURE: 4-COLUMNS TYPE MAIN RAM DIAMETER: 800MM X2 SETS UP-DOWN STROKE:1000MM SIDE CYLINDER:180MM X120MM X STROKE 1000MM X2SETS DAYLIGHT:1800MM TIE ROD DISTANCE: 3030MM X2000MM MOVING TABLE SIZE: 3000 X1950MM DOWN SPEED: MAX. 300MM/S(NON-LOAD) UP SPEED: MAX. 250MM/S UP-DOWN CONTROL: HYDRAULIC SERVO, ENCODER, CLOSED LOOP TOP DIE POWER: MAX. 15TON (ACCESSARIES) 1. MOVING BOLSTER(BY HYDRAULIC MOTOR) -STROKE:4250MM -LOAD CAPACITY:MAX. 20TON TRANS SPEED:150MM/S BOLSTER CLAMPER:HYDRAULIC TYPE 2. DIE CLAMPER SYSTEM 3. HYDRAULIC TYPE DIE LIFT BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-container 4,5 l, heating by hot water\r\nstainless steel, temp. variable 30 - 70 °c\r\ntablemodel\r\n CONTAINER 4,5 L, HEATING BY HOT WATER\R\NSTAINLESS STEEL, TEMP. VARIABLE 30 - 70 °C\R\NTABLEMODEL\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-tube bending machines(80mm)

 
tube bending m/c x2sets

make: soco(taiwan)

year:2010

 model: sb-83x-3s-sr-1b

  cap.: max.ø63.5mm   draw bending radius: max.250mm

  collet feeding length stroke  : max.2,600mm

  length over mandrel: max.4,340mm

  interference zone booster stroke  : 100mm

  bending angle: 190°

  no. of bend per tube: 50bends

  pc control unit

  tool x2set

 

saw cutting m/c x2sets

make: soco(taiwan)

year:2010

model: hvs-355ac-b

  cap.: max.ø63.5mm

  semi auto

  cap.: max.ø100mm, min. (l)20mm

  saw: ø355mm

controller

 

 pipe expander/pipe diamenter reduction machine x2sets

make: wtm(taiwan)

year:2010

. model: w10-sy50-2

  2 head type, hydraulic type

  cap.: reduction ø53~ø44mm

        expanding ø39~ø50mm

stroke: 75mm

  hydraulic unit: 7.5kw

  controller

 

circular sawing m/c

make: soco(taiwan)

year:2011

model:sa-78nce(3m)

cap:round:ø10~76m/m

      square:10x10~70x70m/m

      rectangular:15x10~80x70m/m

  saw blads:tct

  length of cut:50~3,000m/m

  sawing speed:45~272m/min

 

cnc pipe bender

make: ylm(taiwan)

year:2010

  cap' s TUBE BENDING MACHINES(80MM) TUBE BENDING M/C X2SETS MAKE: SOCO(TAIWAN) YEAR:2010 MODEL: SB-83X-3S-SR-1B CAP.: MAX.ø63.5MM DRAW BENDING RADIUS: MAX.250MM COLLET FEEDING LENGTH STROKE : MAX.2,600MM LENGTH OVER MANDREL: MAX.4,340MM INTERFERENCE ZONE BOOSTER STROKE : 100MM BENDING ANGLE: 190° NO. OF BEND PER TUBE: 50BENDS PC CONTROL UNIT TOOL X2SET SAW CUTTING M/C X2SETS MAKE: SOCO(TAIWAN) YEAR:2010 MODEL: HVS-355AC-B CAP.: MAX.ø63.5MM SEMI AUTO CAP.: MAX.ø100MM, MIN. (L)20MM SAW: ø355MM CONTROLLER PIPE EXPANDER/PIPE DIAMENTER REDUCTION MACHINE X2SETS MAKE: WTM(TAIWAN) YEAR:2010 . MODEL: W10-SY50-2 2 HEAD TYPE, HYDRAULIC TYPE CAP.: REDUCTION ø53~ø44MM EXPANDING ø39~ø50MM STROKE: 75MM HYDRAULIC UNIT: 7.5KW CONTROLLER CIRCULAR SAWING M/C MAKE: SOCO(TAIWAN) YEAR:2011 MODEL:SA-78NCE(3M) CAP:ROUND:ø10~76M/M SQUARE:10X10~70X70M/M RECTANGULAR:15X10~80X70M/M SAW BLADS:TCT LENGTH OF CUT:50~3,000M/M SAWING SPEED:45~272M/MIN CNC PIPE BENDER MAKE: YLM(TAIWAN) YEAR:2010 CAP' S " 80MS MODEL : CNC-80MS-8A + CUT OFF CONSIST WITH - BASIC MACHINE WITH STANDARD ACCESSORIES MAX. TUBE WALL THICKNESS:3.0 CLR : 250 MAX. MANDREL WORKING DISTANCE : 2500 SPEED : 600 ~ 800 MACHINE LENGTH : 6100MM MACHINE WIDTH : 2100MM MACHINE HEIGHT : 1650MM CNC PIPE BENDING MACHINE MAKE: YLM(TAIWAN) YEAR:2013 MODEL:CNC-80MS-RSM-8A MAX TUBE BENDING CAP':ø10~80MM MAX TUBE WALL THICKNESS:3.0MM MAX BENDING ANGLE:190° MAX MANDREL WORKING DISTANCE :4,000MM MAIN MOTOR:15? CONTROL PANEL INSIDE ?SERVO PACK:SGDM-1EADA X1EA ?SERVO PACK:SGDM-75ADA XEA OPERATE PANEL TOUCH SCREEN TYPE DIM:550X450X1,430MM(H) FULL AUTO PIPE CHAMFERING M/C MAKE: DONGSUNG(KOREA) YEAR:2015 MODEL: DSM302C-FA CAP: ø15~ø70MM PIPE LENGTH: 130~1,200MM SPEED:3SEC/EA CAMFERING MOTOR:3.75KW X 2EA LENGTH CHECKER AUTOMATIC LOADER BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-heating by electric heating elements at the bottom \r\ntemp. variable 1 - 10, tablemodel\r\n HEATING BY ELECTRIC HEATING ELEMENTS AT THE BOTTOM \R\NTEMP. VARIABLE 1 - 10, TABLEMODEL\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-1.   2000ton x14m roll press

make:hug  smith(england)

model: glasgow

cap' : 2,000ton

(t)44.5mm x 14,300mm

roiis

top roii : ?469.9mm

bottom roii :?391.16mm

max.roii opening:459.74mm

bottom roiis centers distance :436.88-792.48mm

max.stroke of top beam:838.2mm

swival of top beam:max.304.8mm

speed

approach : 76.2mm/ sec

return : 38.1mm/sec

roiiing : 91.4mm/sec

weight of machine : 370ton

controller

power

driving motor : 7.5kw x 2

hyd 'motor : 35w x 2

roii conveyor

2,000 x 3,000 x 6ea
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567



 1. 2000TON X14M ROLL PRESS MAKE:HUG SMITH(ENGLAND) MODEL: GLASGOW CAP' : 2,000TON (T)44.5MM X 14,300MM ROIIS TOP ROII : ?469.9MM BOTTOM ROII :?391.16MM MAX.ROII OPENING:459.74MM BOTTOM ROIIS CENTERS DISTANCE :436.88-792.48MM MAX.STROKE OF TOP BEAM:838.2MM SWIVAL OF TOP BEAM:MAX.304.8MM SPEED APPROACH : 76.2MM/ SEC RETURN : 38.1MM/SEC ROIIING : 91.4MM/SEC WEIGHT OF MACHINE : 370TON CONTROLLER POWER DRIVING MOTOR : 7.5KW X 2 HYD 'MOTOR : 35W X 2 ROII CONVEYOR 2,000 X 3,000 X 6EA BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-type infra ee 520/180, model 09/1998\r\n5 decks, 1800 x 2000 mm\r\ncondition as it is, dismantled and loaded  \r\n TYPE INFRA EE 520/180, MODEL 09/1998\R\N5 DECKS, 1800 X 2000 MM\R\NCONDITION AS IT IS, DISMANTLED AND LOADED \R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-1.   2000ton x14m roll press

make:hug  smith(england)

model: glasgow

cap' : 2,000ton

(t)44.5mm x 14,300mm

roiis

top roii : ?469.9mm

bottom roii :?391.16mm

max.roii opening:459.74mm

bottom roiis centers distance :436.88-792.48mm

max.stroke of top beam:838.2mm

swival of top beam:max.304.8mm

speed

approach : 76.2mm/ sec

return : 38.1mm/sec

roiiing : 91.4mm/sec

weight of machine : 370ton

controller

power

driving motor : 7.5kw x 2

hyd 'motor : 35w x 2

roii conveyor

2,000 x 3,000 x 6ea
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567



 1. 2000TON X14M ROLL PRESS MAKE:HUG SMITH(ENGLAND) MODEL: GLASGOW CAP' : 2,000TON (T)44.5MM X 14,300MM ROIIS TOP ROII : ?469.9MM BOTTOM ROII :?391.16MM MAX.ROII OPENING:459.74MM BOTTOM ROIIS CENTERS DISTANCE :436.88-792.48MM MAX.STROKE OF TOP BEAM:838.2MM SWIVAL OF TOP BEAM:MAX.304.8MM SPEED APPROACH : 76.2MM/ SEC RETURN : 38.1MM/SEC ROIIING : 91.4MM/SEC WEIGHT OF MACHINE : 370TON CONTROLLER POWER DRIVING MOTOR : 7.5KW X 2 HYD 'MOTOR : 35W X 2 ROII CONVEYOR 2,000 X 3,000 X 6EA BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-digital, scale,\r\nmax 30 kg,  sections 1 g, \r\nscaling - platform 280 x 280 mm\r\n DIGITAL, SCALE,\R\NMAX 30 KG, SECTIONS 1 G, \R\NSCALING - PLATFORM 280 X 280 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-hollow plastic profile board production line

 
make: qingdao(korea)

year:2016

hollow profile board coextrusion production line

1-1) single screw extruder :

model : cnu(1)-w120x33

equipped with vacuum loader

-sju-300kg

motor 132kw 60hz

1-1) single screw extruder :

model : cnu(1)-w75x33

equipped with vacuum loader

-sju-200kg

motor:90kw 60hz

1-3) hydraulic screen changer

model : gd-ssp-150, gd-ssp-100

1-4) hollow profile board mould

t-dice

coat-hanger type  mould, board

size: a/b/a 2300x4mm-6mm

1-5) shape forming mould

800mmx2500x80mm

1-6) the 1st 5-roller haul-off

250x2500mm, ac 15 kw

5 groups, 10rollers

1-7) heating straighteningmachine

2200x2500mm

1-8) aircooling stralghtening machine

800x2500mm

1-9) the 2nd three-roller haul-off

?250x2500mm

3 groups, 6 rollers

2300mm

ac moter 1.5kw

motor 2kw

1-11) bracket platform

2300x3000

hollow profile board mould

t-dice

dice width 2450mm

core distance: 8mm*11mm*1mm

coat-hanger type mould, board

size: a/b/a 2300x8mm-10mm

core distance: 8mm*11mm*1mm

 

2 oil-hydraulic press

make: qingdao(korea)

year:2016

table:1800*1400mm

stroke:0-190mm

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567
 HOLLOW PLASTIC PROFILE BOARD PRODUCTION LINE MAKE: QINGDAO(KOREA) YEAR:2016 HOLLOW PROFILE BOARD COEXTRUSION PRODUCTION LINE 1-1) SINGLE SCREW EXTRUDER : MODEL : CNU(1)-W120X33 EQUIPPED WITH VACUUM LOADER -SJU-300KG MOTOR 132KW 60HZ 1-1) SINGLE SCREW EXTRUDER : MODEL : CNU(1)-W75X33 EQUIPPED WITH VACUUM LOADER -SJU-200KG MOTOR:90KW 60HZ 1-3) HYDRAULIC SCREEN CHANGER MODEL : GD-SSP-150, GD-SSP-100 1-4) HOLLOW PROFILE BOARD MOULD T-DICE COAT-HANGER TYPE MOULD, BOARD SIZE: A/B/A 2300X4MM-6MM 1-5) SHAPE FORMING MOULD 800MMX2500X80MM 1-6) THE 1ST 5-ROLLER HAUL-OFF 250X2500MM, AC 15 KW 5 GROUPS, 10ROLLERS 1-7) HEATING STRAIGHTENINGMACHINE 2200X2500MM 1-8) AIRCOOLING STRALGHTENING MACHINE 800X2500MM 1-9) THE 2ND THREE-ROLLER HAUL-OFF ?250X2500MM 3 GROUPS, 6 ROLLERS 2300MM AC MOTER 1.5KW MOTOR 2KW 1-11) BRACKET PLATFORM 2300X3000 HOLLOW PROFILE BOARD MOULD T-DICE DICE WIDTH 2450MM CORE DISTANCE: 8MM*11MM*1MM COAT-HANGER TYPE MOULD, BOARD SIZE: A/B/A 2300X8MM-10MM CORE DISTANCE: 8MM*11MM*1MM 2 OIL-HYDRAULIC PRESS MAKE: QINGDAO(KOREA) YEAR:2016 TABLE:1800*1400MM STROKE:0-190MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-vertical conveyor screw, make van beek, new unknown, tube-model, material stainless steel, diameter dia.200mm, between inlet and outlet 1900mm, shaft diameter 60mm, pitch 110mm, inlet 400x360mm, outlet dia.220mm, with adjustable packing glands, motor (2x)1,5 kw, 220-240/380-415, 240-266/415-460 volt, outlet height 2,3 m, conveying height 3,0 m, mounted on wheels, with switchgear, floorspace +/- 4,0x2,0 m, total height +/- 3,5 m, weight 400 kgvertical conveyor screwsconveyor screws > vertical conveyor screws what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! VERTICAL CONVEYOR SCREW, MAKE VAN BEEK, NEW UNKNOWN, TUBE-MODEL, MATERIAL STAINLESS STEEL, DIAMETER DIA.200MM, BETWEEN INLET AND OUTLET 1900MM, SHAFT DIAMETER 60MM, PITCH 110MM, INLET 400X360MM, OUTLET DIA.220MM, WITH ADJUSTABLE PACKING GLANDS, MOTOR (2X)1,5 KW, 220-240/380-415, 240-266/415-460 VOLT, OUTLET HEIGHT 2,3 M, CONVEYING HEIGHT 3,0 M, MOUNTED ON WHEELS, WITH SWITCHGEAR, FLOORSPACE +/- 4,0X2,0 M, TOTAL HEIGHT +/- 3,5 M, WEIGHT 400 KGVERTICAL CONVEYOR SCREWSCONVEYOR SCREWS > VERTICAL CONVEYOR SCREWS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-hollow plastic profile board production line

 
make: qingdao(korea)

year:2016

hollow profile board coextrusion production line

1-1) single screw extruder :

model : cnu(1)-w120x33

equipped with vacuum loader

-sju-300kg

motor 132kw 60hz

1-1) single screw extruder :

model : cnu(1)-w75x33

equipped with vacuum loader

-sju-200kg

motor:90kw 60hz

1-3) hydraulic screen changer

model : gd-ssp-150, gd-ssp-100

1-4) hollow profile board mould

t-dice

coat-hanger type  mould, board

size: a/b/a 2300x4mm-6mm

1-5) shape forming mould

800mmx2500x80mm

1-6) the 1st 5-roller haul-off

250x2500mm, ac 15 kw

5 groups, 10rollers

1-7) heating straighteningmachine

2200x2500mm

1-8) aircooling stralghtening machine

800x2500mm

1-9) the 2nd three-roller haul-off

?250x2500mm

3 groups, 6 rollers

2300mm

ac moter 1.5kw

motor 2kw

1-11) bracket platform

2300x3000

hollow profile board mould

t-dice

dice width 2450mm

core distance: 8mm*11mm*1mm

coat-hanger type mould, board

size: a/b/a 2300x8mm-10mm

core distance: 8mm*11mm*1mm

 

2 oil-hydraulic press

make: qingdao(korea)

year:2016

table:1800*1400mm

stroke:0-190mm

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567
 HOLLOW PLASTIC PROFILE BOARD PRODUCTION LINE MAKE: QINGDAO(KOREA) YEAR:2016 HOLLOW PROFILE BOARD COEXTRUSION PRODUCTION LINE 1-1) SINGLE SCREW EXTRUDER : MODEL : CNU(1)-W120X33 EQUIPPED WITH VACUUM LOADER -SJU-300KG MOTOR 132KW 60HZ 1-1) SINGLE SCREW EXTRUDER : MODEL : CNU(1)-W75X33 EQUIPPED WITH VACUUM LOADER -SJU-200KG MOTOR:90KW 60HZ 1-3) HYDRAULIC SCREEN CHANGER MODEL : GD-SSP-150, GD-SSP-100 1-4) HOLLOW PROFILE BOARD MOULD T-DICE COAT-HANGER TYPE MOULD, BOARD SIZE: A/B/A 2300X4MM-6MM 1-5) SHAPE FORMING MOULD 800MMX2500X80MM 1-6) THE 1ST 5-ROLLER HAUL-OFF 250X2500MM, AC 15 KW 5 GROUPS, 10ROLLERS 1-7) HEATING STRAIGHTENINGMACHINE 2200X2500MM 1-8) AIRCOOLING STRALGHTENING MACHINE 800X2500MM 1-9) THE 2ND THREE-ROLLER HAUL-OFF ?250X2500MM 3 GROUPS, 6 ROLLERS 2300MM AC MOTER 1.5KW MOTOR 2KW 1-11) BRACKET PLATFORM 2300X3000 HOLLOW PROFILE BOARD MOULD T-DICE DICE WIDTH 2450MM CORE DISTANCE: 8MM*11MM*1MM COAT-HANGER TYPE MOULD, BOARD SIZE: A/B/A 2300X8MM-10MM CORE DISTANCE: 8MM*11MM*1MM 2 OIL-HYDRAULIC PRESS MAKE: QINGDAO(KOREA) YEAR:2016 TABLE:1800*1400MM STROKE:0-190MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 159.000 €
Ubicación: Land-multifoiler press\r\nbrand: bürkle \r\ntype: btf 1528-1400 flowline\r\nyear: 2007\r\n\r\nwith paternoster\r\n\r\nhigh-performance system for the membrane-free thermoforming of smooth and shaped mdf parts with thermoplastic foils.\r\n\r\ntechnical data:\r\n\r\n1. surface material:\r\nfrom the roll, or as a blank cut \r\na) pvc foil 0.30 - 1.0 mm\r\nb) high gloss foil 0,50 - 1,0 mm\r\nc) pet foil 0.35 - 0.6 mm\r\nall foils suitable for the bürkle thermoform process.\r\n\r\n2. carrier material:\r\nmdf board, with smooth profiled surfaces.\r\nthickness tolerance +/- 0.15 mm\r\n\r\n3. adhesives:\r\ndispersion adhesive 80 - 150 g / m²\r\nfor foils, 1-component or 2-component polyurethane adhesive.\r\n\r\ntechnology\r\n\r\nthermoform coating, without membrane, 1400 mm foil\r\neffective area 1330 x 2630 mm\r\nmax. work piece size 1250 x 2550 mm\r\nmin. foil width 1400 mm\r\nsealing dimensions 1370 m (u.u 1360 mm)\r\nwork piece thickness 16 - 38 mm\r\n\r\nworkflow on the entire flowline:\r\n1. positioning of the work piece on the same tray.\r\n2. detecting the work peice positions using a digital camera.\r\n3. cover with foil from the foil paternoster.\r\n4. load the laying pallet into the multifoiler.\r\n5. placing the sheet in the multipin system within the press while entering the press.\r\n6. process of coating without membrane in the process chamber of the multifoilers.\r\npreheat the foil, vacuum and shape with shaping pressure to max. 6 bar.\r\n7. discharge the entire batch into the rotary turner / multiturning.\r\n8. turn the laying pallet with the work piece around the longitudinal axis.\r\n9. discharge of the work pieces on a conveyor belt and transport from the turner.\r\n10. direct, manual cutting with finished cut (trimming) on the conveyor belt.\r\nalternative:\r\n20 cycles per hour, with commercially available foils.\r\nglossy foils have a longer cycle time due to longer warm-up times.\r\n\r\nimplementation of plants\r\n\r\npos. 10 1 receiving and loading station\r\n\r\npos. 20 1 bürkle - multifolier model btf 1528\r\ntechnical data:\r\nhotplate size: 1500 x 2800 mm\r\nloading side: 1500 mm\r\nmax. heating temperature 140 ° c\r\noperating side: right\r\n\r\nlifting, lowering and locking the press table with hydraulic.\r\n\r\n1 upper sealing frame, 15 mm\r\nattached to upper heating plate with quick clamping system.\r\n\r\n1 vacuum device\r\nwith vacuum pump and reservoir.\r\n\r\npos. 21 1 chain conveyor\r\ndriven, reversible, frequency controlled, in the press.\r\n\r\npos. 22 1 chain conveyor\r\ndriven, frequency controlled, under the press\r\n\r\npos. 23 3 lay pallets\r\n\r\npos. 25 1 bürkle multi-pin system\r\nfully automatic sub-system for the membraneless coating of milled mdf parts.\r\n\r\nfunction:\r\n1. the workpieces are placed as before in the laying pallet with the usual distances, but without sub-parts.\r\n2. an lcd matrix camera captures the image and stores it digitally with a very fine resolution of approx. 2 x 2 mm.\r\n3. a special software calculates the respective pins matching the image and initiates the setting of the pins in the btf.\r\n4. the round pins are located in a maintenance-friendly, solid metal block inside the multifoilers.\r\n5. the new laying pattern is set immediately after leaving the laying pallet, or during the new loading of the btf time-saving.\r\n6. the occupied pallet inverts over the finished set sheet and the coating process can begin as known.\r\n\r\npos. 30 1 bürkle multi-turning\r\nautomatic turning station for foil-coated work piece batches with integrated lifting device.\r\nfunction:\r\nthe full laying pallet travels from the btf to the rotary turner after coating. a conveyor belt lowers and clamps the entire batch with the pallet. the entire installation revolves around 180 degrees.\r\n\r\npos. 31 1 piece belt transport\r\n\r\npos. 61 1 foil discharger / discharging\r\nfor unloading the foils during static charges.\r\nto avoid foil contamination\r\nsuitable for 1 foil unwinding station\r\n\r\npos. 10 a paternoster\r\nfor 23 rolls (Ø 400 mm)\r\nproduct width: 1600 mm\r\nconstruction height: 5400 mm\r\noverall width: 2370 mm\r\nincl. 1 piece roll transport\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding. MULTIFOILER PRESS\R\NBRAND: BüRKLE \R\NTYPE: BTF 1528-1400 FLOWLINE\R\NYEAR: 2007\R\N\R\NWITH PATERNOSTER\R\N\R\NHIGH-PERFORMANCE SYSTEM FOR THE MEMBRANE-FREE THERMOFORMING OF SMOOTH AND SHAPED MDF PARTS WITH THERMOPLASTIC FOILS.\R\N\R\NTECHNICAL DATA:\R\N\R\N1. SURFACE MATERIAL:\R\NFROM THE ROLL, OR AS A BLANK CUT \R\NA) PVC FOIL 0.30 - 1.0 MM\R\NB) HIGH GLOSS FOIL 0,50 - 1,0 MM\R\NC) PET FOIL 0.35 - 0.6 MM\R\NALL FOILS SUITABLE FOR THE BüRKLE THERMOFORM PROCESS.\R\N\R\N2. CARRIER MATERIAL:\R\NMDF BOARD, WITH SMOOTH PROFILED SURFACES.\R\NTHICKNESS TOLERANCE +/- 0.15 MM\R\N\R\N3. ADHESIVES:\R\NDISPERSION ADHESIVE 80 - 150 G / M²\R\NFOR FOILS, 1-COMPONENT OR 2-COMPONENT POLYURETHANE ADHESIVE.\R\N\R\NTECHNOLOGY\R\N\R\NTHERMOFORM COATING, WITHOUT MEMBRANE, 1400 MM FOIL\R\NEFFECTIVE AREA 1330 X 2630 MM\R\NMAX. WORK PIECE SIZE 1250 X 2550 MM\R\NMIN. FOIL WIDTH 1400 MM\R\NSEALING DIMENSIONS 1370 M (U.U 1360 MM)\R\NWORK PIECE THICKNESS 16 - 38 MM\R\N\R\NWORKFLOW ON THE ENTIRE FLOWLINE:\R\N1. POSITIONING OF THE WORK PIECE ON THE SAME TRAY.\R\N2. DETECTING THE WORK PEICE POSITIONS USING A DIGITAL CAMERA.\R\N3. COVER WITH FOIL FROM THE FOIL PATERNOSTER.\R\N4. LOAD THE LAYING PALLET INTO THE MULTIFOILER.\R\N5. PLACING THE SHEET IN THE MULTIPIN SYSTEM WITHIN THE PRESS WHILE ENTERING THE PRESS.\R\N6. PROCESS OF COATING WITHOUT MEMBRANE IN THE PROCESS CHAMBER OF THE MULTIFOILERS.\R\NPREHEAT THE FOIL, VACUUM AND SHAPE WITH SHAPING PRESSURE TO MAX. 6 BAR.\R\N7. DISCHARGE THE ENTIRE BATCH INTO THE ROTARY TURNER / MULTITURNING.\R\N8. TURN THE LAYING PALLET WITH THE WORK PIECE AROUND THE LONGITUDINAL AXIS.\R\N9. DISCHARGE OF THE WORK PIECES ON A CONVEYOR BELT AND TRANSPORT FROM THE TURNER.\R\N10. DIRECT, MANUAL CUTTING WITH FINISHED CUT (TRIMMING) ON THE CONVEYOR BELT.\R\NALTERNATIVE:\R\N20 CYCLES PER HOUR, WITH COMMERCIALLY AVAILABLE FOILS.\R\NGLOSSY FOILS HAVE A LONGER CYCLE TIME DUE TO LONGER WARM-UP TIMES.\R\N\R\NIMPLEMENTATION OF PLANTS\R\N\R\NPOS. 10 1 RECEIVING AND LOADING STATION\R\N\R\NPOS. 20 1 BüRKLE - MULTIFOLIER MODEL BTF 1528\R\NTECHNICAL DATA:\R\NHOTPLATE SIZE: 1500 X 2800 MM\R\NLOADING SIDE: 1500 MM\R\NMAX. HEATING TEMPERATURE 140 ° C\R\NOPERATING SIDE: RIGHT\R\N\R\NLIFTING, LOWERING AND LOCKING THE PRESS TABLE WITH HYDRAULIC.\R\N\R\N1 UPPER SEALING FRAME, 15 MM\R\NATTACHED TO UPPER HEATING PLATE WITH QUICK CLAMPING SYSTEM.\R\N\R\N1 VACUUM DEVICE\R\NWITH VACUUM PUMP AND RESERVOIR.\R\N\R\NPOS. 21 1 CHAIN CONVEYOR\R\NDRIVEN, REVERSIBLE, FREQUENCY CONTROLLED, IN THE PRESS.\R\N\R\NPOS. 22 1 CHAIN CONVEYOR\R\NDRIVEN, FREQUENCY CONTROLLED, UNDER THE PRESS\R\N\R\NPOS. 23 3 LAY PALLETS\R\N\R\NPOS. 25 1 BüRKLE MULTI-PIN SYSTEM\R\NFULLY AUTOMATIC SUB-SYSTEM FOR THE MEMBRANELESS COATING OF MILLED MDF PARTS.\R\N\R\NFUNCTION:\R\N1. THE WORKPIECES ARE PLACED AS BEFORE IN THE LAYING PALLET WITH THE USUAL DISTANCES, BUT WITHOUT SUB-PARTS.\R\N2. AN LCD MATRIX CAMERA CAPTURES THE IMAGE AND STORES IT DIGITALLY WITH A VERY FINE RESOLUTION OF APPROX. 2 X 2 MM.\R\N3. A SPECIAL SOFTWARE CALCULATES THE RESPECTIVE PINS MATCHING THE IMAGE AND INITIATES THE SETTING OF THE PINS IN THE BTF.\R\N4. THE ROUND PINS ARE LOCATED IN A MAINTENANCE-FRIENDLY, SOLID METAL BLOCK INSIDE THE MULTIFOILERS.\R\N5. THE NEW LAYING PATTERN IS SET IMMEDIATELY AFTER LEAVING THE LAYING PALLET, OR DURING THE NEW LOADING OF THE BTF TIME-SAVING.\R\N6. THE OCCUPIED PALLET INVERTS OVER THE FINISHED SET SHEET AND THE COATING PROCESS CAN BEGIN AS KNOWN.\R\N\R\NPOS. 30 1 BüRKLE MULTI-TURNING\R\NAUTOMATIC TURNING STATION FOR FOIL-COATED WORK PIECE BATCHES WITH INTEGRATED LIFTING DEVICE.\R\NFUNCTION:\R\NTHE FULL LAYING PALLET TRAVELS FROM THE BTF TO THE ROTARY TURNER AFTER COATING. A CONVEYOR BELT LOWERS AND CLAMPS THE ENTIRE BATCH WITH THE PALLET. THE ENTIRE INSTALLATION REVOLVES AROUND 180 DEGREES.\R\N\R\NPOS. 31 1 PIECE BELT TRANSPORT\R\N\R\NPOS. 61 1 FOIL DISCHARGER / DISCHARGING\R\NFOR UNLOADING THE FOILS DURING STATIC CHARGES.\R\NTO AVOID FOIL CONTAMINATION\R\NSUITABLE FOR 1 FOIL UNWINDING STATION\R\N\R\NPOS. 10 A PATERNOSTER\R\NFOR 23 ROLLS (Ø 400 MM)\R\NPRODUCT WIDTH: 1600 MM\R\NCONSTRUCTION HEIGHT: 5400 MM\R\NOVERALL WIDTH: 2370 MM\R\NINCL. 1 PIECE ROLL TRANSPORT\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-0ton induction melting furnace x 2 sets


10ton induction melting furnace:2sets

make: enf(korean)

manufacturing year:2010


1)power supply x 2set's

make:hwayoung(korean)

manufacturing year:2010

type : ifm6-2

- input : 1,400v/1,866a/60hz

- output : 8,000kw/2,610v/250hz

scr control type




2)furnace x 2set's

cap' : 10ton

tilting type



3)oil filled transformer

13,200v/1,400v/4,500k x 4ea



4)furnace vcb pannel(3?1,400v) x 4ea

5)pump & motor x 4ea

6)emergency generator

cap' : 115kw

7)laddle pre heater & hanger



8)laddle

cap' : 8ton x 1ea

15ton x 1ea

18ton x 1ea

35ton x 2ea



9)cooling sys'

model : kcl-50d2 x 2ea

cap' : 4,664kcal/hr

model : kcl-75d2 x 2ea

cap' : 26,051kcal/hr



10)wall crane x 2set's

cap' : 2.8ton

magnet : ?900 x 5.7kw x 2ea



11)con'c base structure

12)carbon measurer

13)cable, pipe, valve, hyd' unit. controller




2. dust collector

cap' : 250?/min x 1ea

350?/min x 3ea

1,000?/min x 1ea

hood & duct

dust collector

fan


factory electric power total capacity: 9,900kw

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567



 0TON INDUCTION MELTING FURNACE X 2 SETS 10TON INDUCTION MELTING FURNACE:2SETS MAKE: ENF(KOREAN) MANUFACTURING YEAR:2010 1)POWER SUPPLY X 2SET'S MAKE:HWAYOUNG(KOREAN) MANUFACTURING YEAR:2010 TYPE : IFM6-2 - INPUT : 1,400V/1,866A/60HZ - OUTPUT : 8,000KW/2,610V/250HZ SCR CONTROL TYPE 2)FURNACE X 2SET'S CAP' : 10TON TILTING TYPE 3)OIL FILLED TRANSFORMER 13,200V/1,400V/4,500K X 4EA 4)FURNACE VCB PANNEL(3?1,400V) X 4EA 5)PUMP & MOTOR X 4EA 6)EMERGENCY GENERATOR CAP' : 115KW 7)LADDLE PRE HEATER & HANGER 8)LADDLE CAP' : 8TON X 1EA 15TON X 1EA 18TON X 1EA 35TON X 2EA 9)COOLING SYS' MODEL : KCL-50D2 X 2EA CAP' : 4,664KCAL/HR MODEL : KCL-75D2 X 2EA CAP' : 26,051KCAL/HR 10)WALL CRANE X 2SET'S CAP' : 2.8TON MAGNET : ?900 X 5.7KW X 2EA 11)CON'C BASE STRUCTURE 12)CARBON MEASURER 13)CABLE, PIPE, VALVE, HYD' UNIT. CONTROLLER 2. DUST COLLECTOR CAP' : 250?/MIN X 1EA 350?/MIN X 3EA 1,000?/MIN X 1EA HOOD & DUCT DUST COLLECTOR FAN FACTORY ELECTRIC POWER TOTAL CAPACITY: 9,900KW BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-pneumatic capsule pre-and end-crimpler (table model) max. 125mm capsule <br/>id5504 PNEUMATIC CAPSULE PRE-AND END-CRIMPLER (TABLE MODEL) MAX. 125MM CAPSULE
ID5504
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-10ton induction melting furnace x 2 sets


10ton induction melting furnace:2sets

make: enf(korean)

manufacturing year:2010


1)power supply x 2set's

make:hwayoung(korean)

manufacturing year:2010

type : ifm6-2

- input : 1,400v/1,866a/60hz

- output : 8,000kw/2,610v/250hz

scr control type




2)furnace x 2set's

cap' : 10ton

tilting type



3)oil filled transformer

13,200v/1,400v/4,500k x 4ea



4)furnace vcb pannel(3?1,400v) x 4ea

5)pump & motor x 4ea

6)emergency generator

cap' : 115kw

7)laddle pre heater & hanger



8)laddle

cap' : 8ton x 1ea

15ton x 1ea

18ton x 1ea

35ton x 2ea



9)cooling sys'

model : kcl-50d2 x 2ea

cap' : 4,664kcal/hr

model : kcl-75d2 x 2ea

cap' : 26,051kcal/hr



10)wall crane x 2set's

cap' : 2.8ton

magnet : ?900 x 5.7kw x 2ea



11)con'c base structure

12)carbon measurer

13)cable, pipe, valve, hyd' unit. controller




2. dust collector

cap' : 250?/min x 1ea

350?/min x 3ea

1,000?/min x 1ea

hood & duct

dust collector

fan


factory electric power total capacity: 9,900kw

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567



 10TON INDUCTION MELTING FURNACE X 2 SETS 10TON INDUCTION MELTING FURNACE:2SETS MAKE: ENF(KOREAN) MANUFACTURING YEAR:2010 1)POWER SUPPLY X 2SET'S MAKE:HWAYOUNG(KOREAN) MANUFACTURING YEAR:2010 TYPE : IFM6-2 - INPUT : 1,400V/1,866A/60HZ - OUTPUT : 8,000KW/2,610V/250HZ SCR CONTROL TYPE 2)FURNACE X 2SET'S CAP' : 10TON TILTING TYPE 3)OIL FILLED TRANSFORMER 13,200V/1,400V/4,500K X 4EA 4)FURNACE VCB PANNEL(3?1,400V) X 4EA 5)PUMP & MOTOR X 4EA 6)EMERGENCY GENERATOR CAP' : 115KW 7)LADDLE PRE HEATER & HANGER 8)LADDLE CAP' : 8TON X 1EA 15TON X 1EA 18TON X 1EA 35TON X 2EA 9)COOLING SYS' MODEL : KCL-50D2 X 2EA CAP' : 4,664KCAL/HR MODEL : KCL-75D2 X 2EA CAP' : 26,051KCAL/HR 10)WALL CRANE X 2SET'S CAP' : 2.8TON MAGNET : ?900 X 5.7KW X 2EA 11)CON'C BASE STRUCTURE 12)CARBON MEASURER 13)CABLE, PIPE, VALVE, HYD' UNIT. CONTROLLER 2. DUST COLLECTOR CAP' : 250?/MIN X 1EA 350?/MIN X 3EA 1,000?/MIN X 1EA HOOD & DUCT DUST COLLECTOR FAN FACTORY ELECTRIC POWER TOTAL CAPACITY: 9,900KW BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 60.000 €
Ubicación: Land-weight approx.: 37000 kg<br/>dimensions (l x w x h) approx.: 50000 x 7500 x 2600 mm<br/>description: used for the production of scaffolding / mezzanine tables measuring 500 mm type aes , variable length, with patented system of clinching<br> usable working width profiling about 1000 mm<br> line composed of:<br> - unwinding reel with loading cot brand grandini model psp 10 year 2001, useful arm length about 1050 mm, equipped with upper premirotolo<br> - piemme brand feeder, year 2006, useful working width about 1100 mm equipped with in-line welding system for sheet metal tapes<br> - inlet profiling press machine<br> - profiling machine 20 + 15 steps, total 35 steps - cutting shears about 11 kw - island of clinching and assembly of aes brand with stacking robot brand kuka model kr 125/3 year 2002 control vkr c2<br> - <b> electrical system to be re-wired <,/ b>,</b> WEIGHT APPROX.: 37000 KG
DIMENSIONS (L X W X H) APPROX.: 50000 X 7500 X 2600 MM
DESCRIPTION: USED FOR THE PRODUCTION OF SCAFFOLDING / MEZZANINE TABLES MEASURING 500 MM TYPE AES , VARIABLE LENGTH, WITH PATENTED SYSTEM OF CLINCHING
USABLE WORKING WIDTH PROFILING ABOUT 1000 MM
LINE COMPOSED OF:
- UNWINDING REEL WITH LOADING COT BRAND GRANDINI MODEL PSP 10 YEAR 2001, USEFUL ARM LENGTH ABOUT 1050 MM, EQUIPPED WITH UPPER PREMIROTOLO
- PIEMME BRAND FEEDER, YEAR 2006, USEFUL WORKING WIDTH ABOUT 1100 MM EQUIPPED WITH IN-LINE WELDING SYSTEM FOR SHEET METAL TAPES
- INLET PROFILING PRESS MACHINE
- PROFILING MACHINE 20 + 15 STEPS, TOTAL 35 STEPS - CUTTING SHEARS ABOUT 11 KW - ISLAND OF CLINCHING AND ASSEMBLY OF AES BRAND WITH STACKING ROBOT BRAND KUKA MODEL KR 125/3 YEAR 2002 CONTROL VKR C2
- ELECTRICAL SYSTEM TO BE RE-WIRED <,/ B>,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-45mw solar cell production line

 make:rena(germany)

manufacturing year:2009

product:polycrystalline

product dimension :6inch

no.of busbars:3
type:3bb


bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    
busbar width:1.3mm  45MW SOLAR CELL PRODUCTION LINE MAKE:RENA(GERMANY) MANUFACTURING YEAR:2009 PRODUCT:POLYCRYSTALLINE PRODUCT DIMENSION :6INCH NO.OF BUSBARS:3 TYPE:3BB BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567 BUSBAR WIDTH:1.3MM
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 42.000 €
Ubicación: Land-weight approx.: 17000 kg<br/>dimensions (l x w x h) approx.: 12800 x 2500 x 2000 mm<br/>description: used for the production of gypsum sheet h. 20 mm<br> usable working width, profiling 1000 mm<br> line composed of:<br> - unwinding reel with loading cradle vittoria model viky model - 10 years 2002, useful arm length about 1050 mm<br> - profiling machine 17 passages brand tecnopromec model revo<br> - cutting shears<br> - stacker WEIGHT APPROX.: 17000 KG
DIMENSIONS (L X W X H) APPROX.: 12800 X 2500 X 2000 MM
DESCRIPTION: USED FOR THE PRODUCTION OF GYPSUM SHEET H. 20 MM
USABLE WORKING WIDTH, PROFILING 1000 MM
LINE COMPOSED OF:
- UNWINDING REEL WITH LOADING CRADLE VITTORIA MODEL VIKY MODEL - 10 YEARS 2002, USEFUL ARM LENGTH ABOUT 1050 MM
- PROFILING MACHINE 17 PASSAGES BRAND TECNOPROMEC MODEL REVO
- CUTTING SHEARS
- STACKER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-45mw solar cell production line

 make:rena(germany)

manufacturing year:2009

product:polycrystalline

product dimension :6inch

no.of busbars:3
type:3bb


bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    
busbar width:1.3mm  45MW SOLAR CELL PRODUCTION LINE MAKE:RENA(GERMANY) MANUFACTURING YEAR:2009 PRODUCT:POLYCRYSTALLINE PRODUCT DIMENSION :6INCH NO.OF BUSBARS:3 TYPE:3BB BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567 BUSBAR WIDTH:1.3MM
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 48.000 €
Ubicación: Land-weight approx.: 25000 kg<br/>dimensions (l x w x h) approx.: 29000 x 4400 x 2300 mm<br/>description: used for the production of greek sheet h.55 mm<br> maximum working thickness about 0.5 mm<br> line composed of:<br> - unwinding reel with loading cradle vitty brand model viky - 15 years 2002, useful arm length about 1500 mm, equipped with upper premirotolo<br> - profiling machine 22 passes tecnopromec brand model univer b, year 2004, max working width about 1250 mm<br> - cutting shears<br> - stacker<br> WEIGHT APPROX.: 25000 KG
DIMENSIONS (L X W X H) APPROX.: 29000 X 4400 X 2300 MM
DESCRIPTION: USED FOR THE PRODUCTION OF GREEK SHEET H.55 MM
MAXIMUM WORKING THICKNESS ABOUT 0.5 MM
LINE COMPOSED OF:
- UNWINDING REEL WITH LOADING CRADLE VITTY BRAND MODEL VIKY - 15 YEARS 2002, USEFUL ARM LENGTH ABOUT 1500 MM, EQUIPPED WITH UPPER PREMIROTOLO
- PROFILING MACHINE 22 PASSES TECNOPROMEC BRAND MODEL UNIVER B, YEAR 2004, MAX WORKING WIDTH ABOUT 1250 MM
- CUTTING SHEARS
- STACKER
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-composite system:
â?¢ manufacturer: bkt
â?¢ model: cns
â?¢ length: approx. 1.85 m
â?¢ width: 0,85 m
â?¢ height: 1.90 m
â?¢ consisting of 6 engines:
  o manufacturer: bitzer
  o type: 4p-10.2y-40p
â?¢ weight: 1,390 kg
â?¢ refrigerant: r404a
â?¢ year of construction: 2005

condenser:
â?¢ manufacturer: gã¼ntner
â?¢type: s-gvh090.1d/4-e(s)
â?¢ length: 9,70 m
â?¢ width: 1.54 m
â?¢ height: 1.80 m
â?¢ year of construction: 2005
â?¢ with 4 fans
â?¢ with 2 collectors:
  o manufacturer: gã¼ntner
  o volume: 75 and 100 ltr.
  o bj.: 2005

control cabinet:
â?¢ manufacturer: jotec
â?¢ length: 1.60 m
â?¢ width: 0,55 m
â?¢ height: 1.95 m
â?¢ year of construction: 2005 COMPOSITE SYSTEM: &ACIRC;?&CENT; MANUFACTURER: BKT &ACIRC;?&CENT; MODEL: CNS &ACIRC;?&CENT; LENGTH: APPROX. 1.85 M &ACIRC;?&CENT; WIDTH: 0,85 M &ACIRC;?&CENT; HEIGHT: 1.90 M &ACIRC;?&CENT; CONSISTING OF 6 ENGINES: O MANUFACTURER: BITZER O TYPE: 4P-10.2Y-40P &ACIRC;?&CENT; WEIGHT: 1,390 KG &ACIRC;?&CENT; REFRIGERANT: R404A &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 2005 CONDENSER: &ACIRC;?&CENT; MANUFACTURER: G&ATILDE;&FRAC14;NTNER &ACIRC;?&CENT;TYPE: S-GVH090.1D/4-E(S) &ACIRC;?&CENT; LENGTH: 9,70 M &ACIRC;?&CENT; WIDTH: 1.54 M &ACIRC;?&CENT; HEIGHT: 1.80 M &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 2005 &ACIRC;?&CENT; WITH 4 FANS &ACIRC;?&CENT; WITH 2 COLLECTORS: O MANUFACTURER: G&ATILDE;&FRAC14;NTNER O VOLUME: 75 AND 100 LTR. O BJ.: 2005 CONTROL CABINET: &ACIRC;?&CENT; MANUFACTURER: JOTEC &ACIRC;?&CENT; LENGTH: 1.60 M &ACIRC;?&CENT; WIDTH: 0,55 M &ACIRC;?&CENT; HEIGHT: 1.95 M &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 2005
Vendedor: USEDmarket GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 50.000 €
Ubicación: Land-weight approx.: 33000 kg<br/>dimensions (l x w x h) approx.: 41000 x 9000 x 4000 mm<br/>description: used for the production of scaffolding tables / structures measuring 500 mm profilblock double omega, with patented clinching system maximum working thickness about 3 mm line composed of: - unwinding reel with loading cradle of the vittoria viky brand - 10 years 2002, - roller leveling machine, useful working width approx. 1400 mm - press with  punch roll system in entry for profiling machine. working width approx. 1300 mm - profiling machine 30 passes eurositech model 3x750x10 year 2000 - cutting shears - island of clitting and assembly aes brand with manipulator system for unloading and stacking - <b> electrical system to be re-wired <,/ b>,</b> WEIGHT APPROX.: 33000 KG
DIMENSIONS (L X W X H) APPROX.: 41000 X 9000 X 4000 MM
DESCRIPTION: USED FOR THE PRODUCTION OF SCAFFOLDING TABLES / STRUCTURES MEASURING 500 MM PROFILBLOCK DOUBLE OMEGA, WITH PATENTED CLINCHING SYSTEM MAXIMUM WORKING THICKNESS ABOUT 3 MM LINE COMPOSED OF: - UNWINDING REEL WITH LOADING CRADLE OF THE VITTORIA VIKY BRAND - 10 YEARS 2002, - ROLLER LEVELING MACHINE, USEFUL WORKING WIDTH APPROX. 1400 MM - PRESS WITH PUNCH ROLL SYSTEM IN ENTRY FOR PROFILING MACHINE. WORKING WIDTH APPROX. 1300 MM - PROFILING MACHINE 30 PASSES EUROSITECH MODEL 3X750X10 YEAR 2000 - CUTTING SHEARS - ISLAND OF CLITTING AND ASSEMBLY AES BRAND WITH MANIPULATOR SYSTEM FOR UNLOADING AND STACKING - ELECTRICAL SYSTEM TO BE RE-WIRED <,/ B>,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: mbo
model: t52/4x
4 pockets
can be seen in production
location: germany
price: on request MANUFACTURER: MBO MODEL: T52/4X 4 POCKETS CAN BE SEEN IN PRODUCTION LOCATION: GERMANY PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Precio: used machinery auction RESALE 80.000 €
Ubicación: Land-weight approx.: 40000 kg<br/>dimensions (l x w x h) approx.: 65000 x 7500 x 4100 mm<br/>description: used for the production of scaffolding tables measuring 500 mm with the patented system of clinching<br> usable working width, profiling about 1100 mm<br> line composed of:<br> - unwinder with load cradle brand vittoria model vi ki10 year 2002, useful arm length about 1050 mm, equipped with upper premirotolo<br> - piemme brand feeder, year 2006, useful working width about 1100 mm equipped with in-line welding system for sheet metal tapes<br> - infeed roller conveyor presses<br> - n.3 online presses brand sicmi model psq a 100/150/70 ton, year 2007 for blanking / drilling / embossing and marking<br> - 35-pass profiling machine - cutting shears<br> - conveyor belt<br> - island of clitting and assembly aes brand consisting of:<br> manual application station head, automatic clinching station on carousel consisting of 2 stations for horizontal and 2 vertical clinching, manipulator for unloading and stacking on 2 stations.<br> - <b> electrical system to be re-wired <,/ b>,</b> WEIGHT APPROX.: 40000 KG
DIMENSIONS (L X W X H) APPROX.: 65000 X 7500 X 4100 MM
DESCRIPTION: USED FOR THE PRODUCTION OF SCAFFOLDING TABLES MEASURING 500 MM WITH THE PATENTED SYSTEM OF CLINCHING
USABLE WORKING WIDTH, PROFILING ABOUT 1100 MM
LINE COMPOSED OF:
- UNWINDER WITH LOAD CRADLE BRAND VITTORIA MODEL VI KI10 YEAR 2002, USEFUL ARM LENGTH ABOUT 1050 MM, EQUIPPED WITH UPPER PREMIROTOLO
- PIEMME BRAND FEEDER, YEAR 2006, USEFUL WORKING WIDTH ABOUT 1100 MM EQUIPPED WITH IN-LINE WELDING SYSTEM FOR SHEET METAL TAPES
- INFEED ROLLER CONVEYOR PRESSES
- N.3 ONLINE PRESSES BRAND SICMI MODEL PSQ A 100/150/70 TON, YEAR 2007 FOR BLANKING / DRILLING / EMBOSSING AND MARKING
- 35-PASS PROFILING MACHINE - CUTTING SHEARS
- CONVEYOR BELT
- ISLAND OF CLITTING AND ASSEMBLY AES BRAND CONSISTING OF:
MANUAL APPLICATION STATION HEAD, AUTOMATIC CLINCHING STATION ON CAROUSEL CONSISTING OF 2 STATIONS FOR HORIZONTAL AND 2 VERTICAL CLINCHING, MANIPULATOR FOR UNLOADING AND STACKING ON 2 STATIONS.
- ELECTRICAL SYSTEM TO BE RE-WIRED <,/ B>,
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-a power generator to sell older model year 1979 starter defective generator 80 kva A POWER GENERATOR TO SELL OLDER MODEL YEAR 1979 STARTER DEFECTIVE GENERATOR 80 KVA
Vendedor: MANNOTT METALLRECYCLING
Año de construcción: usado
Precio: used machinery auction RESALE 50.000 €
Ubicación: Land-weight approx.: 35000 kg<br/>dimensions (l x w x h) approx.: 40000 x 9500 x 3800 mm<br/>description: used for the production of scaffolding tables measuring 330 mm, with the patented system of clinching<br> usable working width about 800 mm, about 750 mm<br> line composed of:<br> - vittoria double decoiler vittoria model v6 year 2002, useful arm length about 800 mm<br> - power supply brand sicmi, useful working width about 750 mm<br> - n.3 online presses brand sicmi model psq 70 a year 2008 power 70 ton. each<br> - 20-pass profiling machine - cutting shears<br> - island of clitting and assembly aes brand with manipulator for unloading and stacking - <b> electrical system to be re-wired <,/ b>,</b> WEIGHT APPROX.: 35000 KG
DIMENSIONS (L X W X H) APPROX.: 40000 X 9500 X 3800 MM
DESCRIPTION: USED FOR THE PRODUCTION OF SCAFFOLDING TABLES MEASURING 330 MM, WITH THE PATENTED SYSTEM OF CLINCHING
USABLE WORKING WIDTH ABOUT 800 MM, ABOUT 750 MM
LINE COMPOSED OF:
- VITTORIA DOUBLE DECOILER VITTORIA MODEL V6 YEAR 2002, USEFUL ARM LENGTH ABOUT 800 MM
- POWER SUPPLY BRAND SICMI, USEFUL WORKING WIDTH ABOUT 750 MM
- N.3 ONLINE PRESSES BRAND SICMI MODEL PSQ 70 A YEAR 2008 POWER 70 TON. EACH
- 20-PASS PROFILING MACHINE - CUTTING SHEARS
- ISLAND OF CLITTING AND ASSEMBLY AES BRAND WITH MANIPULATOR FOR UNLOADING AND STACKING - ELECTRICAL SYSTEM TO BE RE-WIRED <,/ B>,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-martin manut, 1998
ref.nr: 2609 manufacturer martin model manut year built: 1998 max sheet size: 2400 mm availability: immediately condition: very good price: on technical request spezification: â?¢ martin palettizer
â?¢ 2400 mm
â?¢ in store in germany
 MARTIN MANUT, 1998 REF.NR: 2609 MANUFACTURER MARTIN MODEL MANUT YEAR BUILT: 1998 MAX SHEET SIZE: 2400 MM AVAILABILITY: IMMEDIATELY CONDITION: VERY GOOD PRICE: ON TECHNICAL REQUEST SPEZIFICATION: &ACIRC;?&CENT; MARTIN PALETTIZER &ACIRC;?&CENT; 2400 MM &ACIRC;?&CENT; IN STORE IN GERMANY
Vendedor: PP LION GMBH
Año de construcción: usado
Ubicación: Land-pneumatic capsule pre-and end-crimpler (table model) max. 125mm capsule <br/>id5502 PNEUMATIC CAPSULE PRE-AND END-CRIMPLER (TABLE MODEL) MAX. 125MM CAPSULE
ID5502
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-4inch x 2.5mm thickness stainless steel tube mill 

make:seojin(korean)

manufacturing year:2014(not used)

cap' : Ø101.6(4inch)×2.5t thickness

-raw material:sts 304, 316,304l, 316l

-line speed:max. 20m/min

-thickness : min. 08 ~ max.2.5mm

1)uncoiler ass'y

type : single head drum

drum out dia : Ø508mm

skelp weight : max. 3ton

skelp out dia : max Ø1,500mm

turning type : manual turning

extension or shrinkage: manual screw extension or shrinkage

2)shear & tig welder

make:hankook(korean)

year;2014

cap' : 350a

model : ep-350t

3)side guide stand ass'y

guied bar : Ø250×200(l)mm

guide bar : 2set×2sets

screw handle : manual

4)forming stand & bad ass'y

main shaft : Ø60

gear box : position type, total 8 stage

speed control : 2step position

reducer : pnion reducer

up down adjustment type : left right operation

universal joint & base ass'y

drive motor : vs moter:(11kw-1800rpm)

5)cooling box ass'y

size : 855×1.300×655(h)mm

cooling pump : 1Ø220 auto pump

6)bead grinder ass'y

ac motor : 2.2kw×4p s 2set

g/d motor : 0.4kw×4p×1/30

endless grinder paper: 100w×2000

7)sizing stand & bed ass'y

main shaft : Ø605mm

speed control : 1step position

reducer : pnion reducer

up down djustment type : left right operation

universal joint & base ass'y

8)cutting m/c

type : metal saw cutter

power : hyd cylinder up-down: (Ø80×250st)

saw drive motor: ac 1.5kw×4p

car forward/backward type: air cylinder(Ø150×2000st)

9)no.1 run out conveyor

transfer type : mc roller drive

transfer speed : max. 30m/min

transfer distance : 7m

10)straightner

roller type : cross 2roll×3set

head motor : ac 2.2kw×4p×2set

11)no.2 run out conveyor

transfer type: mc roller drive

transfer speed: max. 30m/min

transfer distance : 7m

12)grinder×4set

transfer type : roller drive

moter : a.c 3.7kw×4p=4sets

transfer speed : mac. 30m/min

grinding wheel×4sets

13)no.3tilting conveyor

transfer type: pinch roll drive

transfer speed: max.30m/min

transfer distance : 7m

kicker equipment : air cylinder

14)hydraulic unit part×2set

15)control panel 

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567  4INCH X 2.5MM THICKNESS STAINLESS STEEL TUBE MILL MAKE:SEOJIN(KOREAN) MANUFACTURING YEAR:2014(NOT USED) CAP' : Ø101.6(4INCH)×2.5T THICKNESS -RAW MATERIAL:STS 304, 316,304L, 316L -LINE SPEED:MAX. 20M/MIN -THICKNESS : MIN. 08 ~ MAX.2.5MM 1)UNCOILER ASS'Y TYPE : SINGLE HEAD DRUM DRUM OUT DIA : Ø508MM SKELP WEIGHT : MAX. 3TON SKELP OUT DIA : MAX Ø1,500MM TURNING TYPE : MANUAL TURNING EXTENSION OR SHRINKAGE: MANUAL SCREW EXTENSION OR SHRINKAGE 2)SHEAR & TIG WELDER MAKE:HANKOOK(KOREAN) YEAR;2014 CAP' : 350A MODEL : EP-350T 3)SIDE GUIDE STAND ASS'Y GUIED BAR : Ø250×200(L)MM GUIDE BAR : 2SET×2SETS SCREW HANDLE : MANUAL 4)FORMING STAND & BAD ASS'Y MAIN SHAFT : Ø60 GEAR BOX : POSITION TYPE, TOTAL 8 STAGE SPEED CONTROL : 2STEP POSITION REDUCER : PNION REDUCER UP DOWN ADJUSTMENT TYPE : LEFT RIGHT OPERATION UNIVERSAL JOINT & BASE ASS'Y DRIVE MOTOR : VS MOTER:(11KW-1800RPM) 5)COOLING BOX ASS'Y SIZE : 855×1.300×655(H)MM COOLING PUMP : 1Ø220 AUTO PUMP 6)BEAD GRINDER ASS'Y AC MOTOR : 2.2KW×4P S 2SET G/D MOTOR : 0.4KW×4P×1/30 ENDLESS GRINDER PAPER: 100W×2000 7)SIZING STAND & BED ASS'Y MAIN SHAFT : Ø605MM SPEED CONTROL : 1STEP POSITION REDUCER : PNION REDUCER UP DOWN DJUSTMENT TYPE : LEFT RIGHT OPERATION UNIVERSAL JOINT & BASE ASS'Y 8)CUTTING M/C TYPE : METAL SAW CUTTER POWER : HYD CYLINDER UP-DOWN: (Ø80×250ST) SAW DRIVE MOTOR: AC 1.5KW×4P CAR FORWARD/BACKWARD TYPE: AIR CYLINDER(Ø150×2000ST) 9)NO.1 RUN OUT CONVEYOR TRANSFER TYPE : MC ROLLER DRIVE TRANSFER SPEED : MAX. 30M/MIN TRANSFER DISTANCE : 7M 10)STRAIGHTNER ROLLER TYPE : CROSS 2ROLL×3SET HEAD MOTOR : AC 2.2KW×4P×2SET 11)NO.2 RUN OUT CONVEYOR TRANSFER TYPE: MC ROLLER DRIVE TRANSFER SPEED: MAX. 30M/MIN TRANSFER DISTANCE : 7M 12)GRINDER×4SET TRANSFER TYPE : ROLLER DRIVE MOTER : A.C 3.7KW×4P=4SETS TRANSFER SPEED : MAC. 30M/MIN GRINDING WHEEL×4SETS 13)NO.3TILTING CONVEYOR TRANSFER TYPE: PINCH ROLL DRIVE TRANSFER SPEED: MAX.30M/MIN TRANSFER DISTANCE : 7M KICKER EQUIPMENT : AIR CYLINDER 14)HYDRAULIC UNIT PART×2SET 15)CONTROL PANEL BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 1.450 €
Ubicación: Land-safety cabinet, hazardous goods cabinet, safety cabinets, tool cabinet, steel cabinet, workshop cabinet <br /><br /> -safe hazardous substance storage <br /> model 2.12.925 <br /> -width 1200 mm <br /> depth 640 mm <br /> -height 2050 mm <br /> - with 2x self-closing locking doors <br /> - with 3x shelves <br /> dimensions 1200/640/h2050 mm<br /> -weight 326 kg SAFETY CABINET, HAZARDOUS GOODS CABINET, SAFETY CABINETS, TOOL CABINET, STEEL CABINET, WORKSHOP CABINET

-SAFE HAZARDOUS SUBSTANCE STORAGE
MODEL 2.12.925
-WIDTH 1200 MM
DEPTH 640 MM
-HEIGHT 2050 MM
- WITH 2X SELF-CLOSING LOCKING DOORS
- WITH 3X SHELVES
DIMENSIONS 1200/640/H2050 MM
-WEIGHT 326 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-4inch x 2.5mm thickness stainless steel tube mill 

make:seojin(korean)

manufacturing year:2014(not used)

cap' : Ø101.6(4inch)×2.5t thickness

-raw material:sts 304, 316,304l, 316l

-line speed:max. 20m/min

-thickness : min. 08 ~ max.2.5mm

1)uncoiler ass'y

type : single head drum

drum out dia : Ø508mm

skelp weight : max. 3ton

skelp out dia : max Ø1,500mm

turning type : manual turning

extension or shrinkage: manual screw extension or shrinkage

2)shear & tig welder

make:hankook(korean)

year;2014

cap' : 350a

model : ep-350t

3)side guide stand ass'y

guied bar : Ø250×200(l)mm

guide bar : 2set×2sets

screw handle : manual

4)forming stand & bad ass'y

main shaft : Ø60

gear box : position type, total 8 stage

speed control : 2step position

reducer : pnion reducer

up down adjustment type : left right operation

universal joint & base ass'y

drive motor : vs moter:(11kw-1800rpm)

5)cooling box ass'y

size : 855×1.300×655(h)mm

cooling pump : 1Ø220 auto pump

6)bead grinder ass'y

ac motor : 2.2kw×4p s 2set

g/d motor : 0.4kw×4p×1/30

endless grinder paper: 100w×2000

7)sizing stand & bed ass'y

main shaft : Ø605mm

speed control : 1step position

reducer : pnion reducer

up down djustment type : left right operation

universal joint & base ass'y

8)cutting m/c

type : metal saw cutter

power : hyd cylinder up-down: (Ø80×250st)

saw drive motor: ac 1.5kw×4p

car forward/backward type: air cylinder(Ø150×2000st)

9)no.1 run out conveyor

transfer type : mc roller drive

transfer speed : max. 30m/min

transfer distance : 7m

10)straightner

roller type : cross 2roll×3set

head motor : ac 2.2kw×4p×2set

11)no.2 run out conveyor

transfer type: mc roller drive

transfer speed: max. 30m/min

transfer distance : 7m

12)grinder×4set

transfer type : roller drive

moter : a.c 3.7kw×4p=4sets

transfer speed : mac. 30m/min

grinding wheel×4sets

13)no.3tilting conveyor

transfer type: pinch roll drive

transfer speed: max.30m/min

transfer distance : 7m

kicker equipment : air cylinder

14)hydraulic unit part×2set

15)control panel 

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567  4INCH X 2.5MM THICKNESS STAINLESS STEEL TUBE MILL MAKE:SEOJIN(KOREAN) MANUFACTURING YEAR:2014(NOT USED) CAP' : Ø101.6(4INCH)×2.5T THICKNESS -RAW MATERIAL:STS 304, 316,304L, 316L -LINE SPEED:MAX. 20M/MIN -THICKNESS : MIN. 08 ~ MAX.2.5MM 1)UNCOILER ASS'Y TYPE : SINGLE HEAD DRUM DRUM OUT DIA : Ø508MM SKELP WEIGHT : MAX. 3TON SKELP OUT DIA : MAX Ø1,500MM TURNING TYPE : MANUAL TURNING EXTENSION OR SHRINKAGE: MANUAL SCREW EXTENSION OR SHRINKAGE 2)SHEAR & TIG WELDER MAKE:HANKOOK(KOREAN) YEAR;2014 CAP' : 350A MODEL : EP-350T 3)SIDE GUIDE STAND ASS'Y GUIED BAR : Ø250×200(L)MM GUIDE BAR : 2SET×2SETS SCREW HANDLE : MANUAL 4)FORMING STAND & BAD ASS'Y MAIN SHAFT : Ø60 GEAR BOX : POSITION TYPE, TOTAL 8 STAGE SPEED CONTROL : 2STEP POSITION REDUCER : PNION REDUCER UP DOWN ADJUSTMENT TYPE : LEFT RIGHT OPERATION UNIVERSAL JOINT & BASE ASS'Y DRIVE MOTOR : VS MOTER:(11KW-1800RPM) 5)COOLING BOX ASS'Y SIZE : 855×1.300×655(H)MM COOLING PUMP : 1Ø220 AUTO PUMP 6)BEAD GRINDER ASS'Y AC MOTOR : 2.2KW×4P S 2SET G/D MOTOR : 0.4KW×4P×1/30 ENDLESS GRINDER PAPER: 100W×2000 7)SIZING STAND & BED ASS'Y MAIN SHAFT : Ø605MM SPEED CONTROL : 1STEP POSITION REDUCER : PNION REDUCER UP DOWN DJUSTMENT TYPE : LEFT RIGHT OPERATION UNIVERSAL JOINT & BASE ASS'Y 8)CUTTING M/C TYPE : METAL SAW CUTTER POWER : HYD CYLINDER UP-DOWN: (Ø80×250ST) SAW DRIVE MOTOR: AC 1.5KW×4P CAR FORWARD/BACKWARD TYPE: AIR CYLINDER(Ø150×2000ST) 9)NO.1 RUN OUT CONVEYOR TRANSFER TYPE : MC ROLLER DRIVE TRANSFER SPEED : MAX. 30M/MIN TRANSFER DISTANCE : 7M 10)STRAIGHTNER ROLLER TYPE : CROSS 2ROLL×3SET HEAD MOTOR : AC 2.2KW×4P×2SET 11)NO.2 RUN OUT CONVEYOR TRANSFER TYPE: MC ROLLER DRIVE TRANSFER SPEED: MAX. 30M/MIN TRANSFER DISTANCE : 7M 12)GRINDER×4SET TRANSFER TYPE : ROLLER DRIVE MOTER : A.C 3.7KW×4P=4SETS TRANSFER SPEED : MAC. 30M/MIN GRINDING WHEEL×4SETS 13)NO.3TILTING CONVEYOR TRANSFER TYPE: PINCH ROLL DRIVE TRANSFER SPEED: MAX.30M/MIN TRANSFER DISTANCE : 7M KICKER EQUIPMENT : AIR CYLINDER 14)HYDRAULIC UNIT PART×2SET 15)CONTROL PANEL BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 45 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ALTECH types: